* [dpdk-dev] [PATCH] net/i40e: fix PF notify issue when VF not up
@ 2017-07-24 18:42 Xiaoyun Li
2017-07-26 6:14 ` Yang, Qiming
2017-07-28 11:39 ` [dpdk-dev] [PATCH v2] " Xiaoyun Li
0 siblings, 2 replies; 8+ messages in thread
From: Xiaoyun Li @ 2017-07-24 18:42 UTC (permalink / raw)
To: dev; +Cc: jingjing.wu, Xiaoyun Li, stable
This patch modifies PF notify error to warning when not
starting up VF.
Fixes: 4861cde46116 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
---
drivers/net/i40e/i40e_pf.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/net/i40e/i40e_pf.c b/drivers/net/i40e/i40e_pf.c
index b4cf57f..2a29f1a 100644
--- a/drivers/net/i40e/i40e_pf.c
+++ b/drivers/net/i40e/i40e_pf.c
@@ -267,8 +267,12 @@ i40e_pf_host_send_msg_to_vf(struct i40e_pf_vf *vf,
ret = i40e_aq_send_msg_to_vf(hw, abs_vf_id, opcode, retval,
msg, msglen, NULL);
if (ret) {
- PMD_INIT_LOG(ERR, "Fail to send message to VF, err %u",
- hw->aq.asq_last_status);
+ if (vf->state == I40E_VF_INACTIVE)
+ PMD_DRV_LOG(WARNING, "Warning! VF %u is inactive now!",
+ abs_vf_id);
+ else
+ PMD_INIT_LOG(ERR, "Fail to send message to VF, err %u",
+ hw->aq.asq_last_status);
}
return ret;
--
2.7.4
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [dpdk-dev] [PATCH] net/i40e: fix PF notify issue when VF not up
2017-07-24 18:42 [dpdk-dev] [PATCH] net/i40e: fix PF notify issue when VF not up Xiaoyun Li
@ 2017-07-26 6:14 ` Yang, Qiming
2017-07-28 11:39 ` [dpdk-dev] [PATCH v2] " Xiaoyun Li
1 sibling, 0 replies; 8+ messages in thread
From: Yang, Qiming @ 2017-07-26 6:14 UTC (permalink / raw)
To: Li, Xiaoyun, dev; +Cc: Wu, Jingjing, Li, Xiaoyun, stable
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Xiaoyun Li
> Sent: Tuesday, July 25, 2017 2:43 AM
> To: dev@dpdk.org
> Cc: Wu, Jingjing <jingjing.wu@intel.com>; Li, Xiaoyun <xiaoyun.li@intel.com>;
> stable@dpdk.org
> Subject: [dpdk-dev] [PATCH] net/i40e: fix PF notify issue when VF not up
>
> This patch modifies PF notify error to warning when not starting up VF.
>
> Fixes: 4861cde46116 ("i40e: new poll mode driver")
> Cc: stable@dpdk.org
>
> Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
> ---
> drivers/net/i40e/i40e_pf.c | 8 ++++++--
> 1 file changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/i40e/i40e_pf.c b/drivers/net/i40e/i40e_pf.c index
> b4cf57f..2a29f1a 100644
> --- a/drivers/net/i40e/i40e_pf.c
> +++ b/drivers/net/i40e/i40e_pf.c
> @@ -267,8 +267,12 @@ i40e_pf_host_send_msg_to_vf(struct i40e_pf_vf *vf,
> ret = i40e_aq_send_msg_to_vf(hw, abs_vf_id, opcode, retval,
> msg, msglen, NULL);
> if (ret) {
> - PMD_INIT_LOG(ERR, "Fail to send message to VF, err %u",
> - hw->aq.asq_last_status);
> + if (vf->state == I40E_VF_INACTIVE)
> + PMD_DRV_LOG(WARNING, "Warning! VF %u is inactive
> now!",
> + abs_vf_id);
> + else
> + PMD_INIT_LOG(ERR, "Fail to send message to VF,
> err %u",
> + hw->aq.asq_last_status);
> }
>
> return ret;
> --
> 2.7.4
Reviewed-by: Qiming Yang <Qiming.yang@intel.com>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [dpdk-dev] [PATCH v2] net/i40e: fix PF notify issue when VF not up
2017-07-28 11:39 ` [dpdk-dev] [PATCH v2] " Xiaoyun Li
@ 2017-07-28 6:52 ` Wu, Jingjing
2017-07-28 7:06 ` Li, Xiaoyun
2017-07-28 15:48 ` [dpdk-dev] [PATCH v3] " Xiaoyun Li
1 sibling, 1 reply; 8+ messages in thread
From: Wu, Jingjing @ 2017-07-28 6:52 UTC (permalink / raw)
To: Li, Xiaoyun; +Cc: dev, stable
> -----Original Message-----
> From: Li, Xiaoyun
> Sent: Friday, July 28, 2017 7:40 PM
> To: Wu, Jingjing <jingjing.wu@intel.com>
> Cc: dev@dpdk.org; Li, Xiaoyun <xiaoyun.li@intel.com>; stable@dpdk.org
> Subject: [PATCH v2] net/i40e: fix PF notify issue when VF not up
>
> This patch modifies PF notify error to warning when not starting
> up VF and modifies VF state to active when VF reset is completed.
>
> Fixes: 4861cde46116 ("i40e: new poll mode driver")
> Cc: stable@dpdk.org
>
> Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
> ---
> v2 changes:
> * add VF state modification when VF reset is done.
> ---
> drivers/net/i40e/i40e_pf.c | 33 +++++++++++++++++++--------------
> 1 file changed, 19 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/net/i40e/i40e_pf.c b/drivers/net/i40e/i40e_pf.c
> index b4cf57f..5d5d24a 100644
> --- a/drivers/net/i40e/i40e_pf.c
> +++ b/drivers/net/i40e/i40e_pf.c
> @@ -152,22 +152,23 @@ i40e_pf_host_vf_reset(struct i40e_pf_vf *vf, bool do_hw_reset)
> val |= I40E_VPGEN_VFRTRIG_VFSWR_MASK;
> I40E_WRITE_REG(hw, I40E_VPGEN_VFRTRIG(vf_id), val);
> I40E_WRITE_FLUSH(hw);
> - }
>
> #define VFRESET_MAX_WAIT_CNT 100
> - /* Wait until VF reset is done */
> - for (i = 0; i < VFRESET_MAX_WAIT_CNT; i++) {
> - rte_delay_us(10);
> - val = I40E_READ_REG(hw, I40E_VPGEN_VFRSTAT(vf_id));
> - if (val & I40E_VPGEN_VFRSTAT_VFRD_MASK)
> - break;
> - }
> + /* Wait until VF reset is done */
> + for (i = 0; i < VFRESET_MAX_WAIT_CNT; i++) {
> + rte_delay_us(10);
> + val = I40E_READ_REG(hw, I40E_VPGEN_VFRSTAT(vf_id));
> + if (val & I40E_VPGEN_VFRSTAT_VFRD_MASK) {
> + vf->state = I40E_VF_ACTIVE;
> + break;
> + }
> + }
>
> - if (i >= VFRESET_MAX_WAIT_CNT) {
> - PMD_DRV_LOG(ERR, "VF reset timeout");
> - return -ETIMEDOUT;
> + if (i >= VFRESET_MAX_WAIT_CNT) {
> + PMD_DRV_LOG(ERR, "VF reset timeout");
> + return -ETIMEDOUT;
> + }
It's much clearer to add "vf->state = I40E_VF_ACTIVE;" here but not above.
> }
> -
> /* This is not first time to do reset, do cleanup job first */
> if (vf->vsi) {
> /* Disable queues */
> @@ -267,8 +268,12 @@ i40e_pf_host_send_msg_to_vf(struct i40e_pf_vf *vf,
> ret = i40e_aq_send_msg_to_vf(hw, abs_vf_id, opcode, retval,
> msg, msglen, NULL);
> if (ret) {
> - PMD_INIT_LOG(ERR, "Fail to send message to VF, err %u",
> - hw->aq.asq_last_status);
> + if (vf->state == I40E_VF_INACTIVE)
> + PMD_DRV_LOG(WARNING, "Warning! VF %u is inactive now!",
> + abs_vf_id);
How about just don't send msg to inactive VF but not print warning?
> + else
> + PMD_INIT_LOG(ERR, "Fail to send message to VF, err %u",
> + hw->aq.asq_last_status);
> }
>
> return ret;
> --
> 2.7.4
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [dpdk-dev] [PATCH v2] net/i40e: fix PF notify issue when VF not up
2017-07-28 6:52 ` Wu, Jingjing
@ 2017-07-28 7:06 ` Li, Xiaoyun
0 siblings, 0 replies; 8+ messages in thread
From: Li, Xiaoyun @ 2017-07-28 7:06 UTC (permalink / raw)
To: Wu, Jingjing; +Cc: dev, stable
1. At first, I add vs state modification as follows, but it will show a warning when I check the patch.
The warning says that usually the else after return or break would not be executed.
if (i >= VFRESET_MAX_WAIT_CNT) {
PMD_DRV_LOG(ERR, "VF reset timeout");
return -ETIMEDOUT;
} else
vf->state = I40E_VF_ACTIVE;
2. Does it mean if vf state isn't inactive, the function will do "ret = i40e_aq_send_msg_to_vf();" and following statements ?
-----Original Message-----
From: Wu, Jingjing
Sent: Friday, July 28, 2017 14:53
To: Li, Xiaoyun <xiaoyun.li@intel.com>
Cc: dev@dpdk.org; stable@dpdk.org
Subject: RE: [PATCH v2] net/i40e: fix PF notify issue when VF not up
> -----Original Message-----
> From: Li, Xiaoyun
> Sent: Friday, July 28, 2017 7:40 PM
> To: Wu, Jingjing <jingjing.wu@intel.com>
> Cc: dev@dpdk.org; Li, Xiaoyun <xiaoyun.li@intel.com>; stable@dpdk.org
> Subject: [PATCH v2] net/i40e: fix PF notify issue when VF not up
>
> This patch modifies PF notify error to warning when not starting up VF
> and modifies VF state to active when VF reset is completed.
>
> Fixes: 4861cde46116 ("i40e: new poll mode driver")
> Cc: stable@dpdk.org
>
> Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
> ---
> v2 changes:
> * add VF state modification when VF reset is done.
> ---
> drivers/net/i40e/i40e_pf.c | 33 +++++++++++++++++++--------------
> 1 file changed, 19 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/net/i40e/i40e_pf.c b/drivers/net/i40e/i40e_pf.c
> index b4cf57f..5d5d24a 100644
> --- a/drivers/net/i40e/i40e_pf.c
> +++ b/drivers/net/i40e/i40e_pf.c
> @@ -152,22 +152,23 @@ i40e_pf_host_vf_reset(struct i40e_pf_vf *vf, bool do_hw_reset)
> val |= I40E_VPGEN_VFRTRIG_VFSWR_MASK;
> I40E_WRITE_REG(hw, I40E_VPGEN_VFRTRIG(vf_id), val);
> I40E_WRITE_FLUSH(hw);
> - }
>
> #define VFRESET_MAX_WAIT_CNT 100
> - /* Wait until VF reset is done */
> - for (i = 0; i < VFRESET_MAX_WAIT_CNT; i++) {
> - rte_delay_us(10);
> - val = I40E_READ_REG(hw, I40E_VPGEN_VFRSTAT(vf_id));
> - if (val & I40E_VPGEN_VFRSTAT_VFRD_MASK)
> - break;
> - }
> + /* Wait until VF reset is done */
> + for (i = 0; i < VFRESET_MAX_WAIT_CNT; i++) {
> + rte_delay_us(10);
> + val = I40E_READ_REG(hw, I40E_VPGEN_VFRSTAT(vf_id));
> + if (val & I40E_VPGEN_VFRSTAT_VFRD_MASK) {
> + vf->state = I40E_VF_ACTIVE;
> + break;
> + }
> + }
>
> - if (i >= VFRESET_MAX_WAIT_CNT) {
> - PMD_DRV_LOG(ERR, "VF reset timeout");
> - return -ETIMEDOUT;
> + if (i >= VFRESET_MAX_WAIT_CNT) {
> + PMD_DRV_LOG(ERR, "VF reset timeout");
> + return -ETIMEDOUT;
> + }
It's much clearer to add "vf->state = I40E_VF_ACTIVE;" here but not above.
> }
> -
> /* This is not first time to do reset, do cleanup job first */
> if (vf->vsi) {
> /* Disable queues */
> @@ -267,8 +268,12 @@ i40e_pf_host_send_msg_to_vf(struct i40e_pf_vf *vf,
> ret = i40e_aq_send_msg_to_vf(hw, abs_vf_id, opcode, retval,
> msg, msglen, NULL);
> if (ret) {
> - PMD_INIT_LOG(ERR, "Fail to send message to VF, err %u",
> - hw->aq.asq_last_status);
> + if (vf->state == I40E_VF_INACTIVE)
> + PMD_DRV_LOG(WARNING, "Warning! VF %u is inactive now!",
> + abs_vf_id);
How about just don't send msg to inactive VF but not print warning?
> + else
> + PMD_INIT_LOG(ERR, "Fail to send message to VF, err %u",
> + hw->aq.asq_last_status);
> }
>
> return ret;
> --
> 2.7.4
^ permalink raw reply [flat|nested] 8+ messages in thread
* [dpdk-dev] [PATCH v2] net/i40e: fix PF notify issue when VF not up
2017-07-24 18:42 [dpdk-dev] [PATCH] net/i40e: fix PF notify issue when VF not up Xiaoyun Li
2017-07-26 6:14 ` Yang, Qiming
@ 2017-07-28 11:39 ` Xiaoyun Li
2017-07-28 6:52 ` Wu, Jingjing
2017-07-28 15:48 ` [dpdk-dev] [PATCH v3] " Xiaoyun Li
1 sibling, 2 replies; 8+ messages in thread
From: Xiaoyun Li @ 2017-07-28 11:39 UTC (permalink / raw)
To: jingjing.wu; +Cc: dev, Xiaoyun Li, stable
This patch modifies PF notify error to warning when not starting
up VF and modifies VF state to active when VF reset is completed.
Fixes: 4861cde46116 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
---
v2 changes:
* add VF state modification when VF reset is done.
---
drivers/net/i40e/i40e_pf.c | 33 +++++++++++++++++++--------------
1 file changed, 19 insertions(+), 14 deletions(-)
diff --git a/drivers/net/i40e/i40e_pf.c b/drivers/net/i40e/i40e_pf.c
index b4cf57f..5d5d24a 100644
--- a/drivers/net/i40e/i40e_pf.c
+++ b/drivers/net/i40e/i40e_pf.c
@@ -152,22 +152,23 @@ i40e_pf_host_vf_reset(struct i40e_pf_vf *vf, bool do_hw_reset)
val |= I40E_VPGEN_VFRTRIG_VFSWR_MASK;
I40E_WRITE_REG(hw, I40E_VPGEN_VFRTRIG(vf_id), val);
I40E_WRITE_FLUSH(hw);
- }
#define VFRESET_MAX_WAIT_CNT 100
- /* Wait until VF reset is done */
- for (i = 0; i < VFRESET_MAX_WAIT_CNT; i++) {
- rte_delay_us(10);
- val = I40E_READ_REG(hw, I40E_VPGEN_VFRSTAT(vf_id));
- if (val & I40E_VPGEN_VFRSTAT_VFRD_MASK)
- break;
- }
+ /* Wait until VF reset is done */
+ for (i = 0; i < VFRESET_MAX_WAIT_CNT; i++) {
+ rte_delay_us(10);
+ val = I40E_READ_REG(hw, I40E_VPGEN_VFRSTAT(vf_id));
+ if (val & I40E_VPGEN_VFRSTAT_VFRD_MASK) {
+ vf->state = I40E_VF_ACTIVE;
+ break;
+ }
+ }
- if (i >= VFRESET_MAX_WAIT_CNT) {
- PMD_DRV_LOG(ERR, "VF reset timeout");
- return -ETIMEDOUT;
+ if (i >= VFRESET_MAX_WAIT_CNT) {
+ PMD_DRV_LOG(ERR, "VF reset timeout");
+ return -ETIMEDOUT;
+ }
}
-
/* This is not first time to do reset, do cleanup job first */
if (vf->vsi) {
/* Disable queues */
@@ -267,8 +268,12 @@ i40e_pf_host_send_msg_to_vf(struct i40e_pf_vf *vf,
ret = i40e_aq_send_msg_to_vf(hw, abs_vf_id, opcode, retval,
msg, msglen, NULL);
if (ret) {
- PMD_INIT_LOG(ERR, "Fail to send message to VF, err %u",
- hw->aq.asq_last_status);
+ if (vf->state == I40E_VF_INACTIVE)
+ PMD_DRV_LOG(WARNING, "Warning! VF %u is inactive now!",
+ abs_vf_id);
+ else
+ PMD_INIT_LOG(ERR, "Fail to send message to VF, err %u",
+ hw->aq.asq_last_status);
}
return ret;
--
2.7.4
^ permalink raw reply [flat|nested] 8+ messages in thread
* [dpdk-dev] [PATCH v3] net/i40e: fix PF notify issue when VF not up
2017-07-28 11:39 ` [dpdk-dev] [PATCH v2] " Xiaoyun Li
2017-07-28 6:52 ` Wu, Jingjing
@ 2017-07-28 15:48 ` Xiaoyun Li
2017-07-31 2:50 ` Wu, Jingjing
1 sibling, 1 reply; 8+ messages in thread
From: Xiaoyun Li @ 2017-07-28 15:48 UTC (permalink / raw)
To: jingjing.wu; +Cc: dev, Xiaoyun Li, stable
This patch stops PF from sending messages to inactive VF
and modifies VF state to active when VF reset is completed.
Fixes: 4861cde46116 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
---
drivers/net/i40e/i40e_pf.c | 29 ++++++++++++++++-------------
1 file changed, 16 insertions(+), 13 deletions(-)
diff --git a/drivers/net/i40e/i40e_pf.c b/drivers/net/i40e/i40e_pf.c
index b4cf57f..e64f849 100644
--- a/drivers/net/i40e/i40e_pf.c
+++ b/drivers/net/i40e/i40e_pf.c
@@ -152,22 +152,22 @@ i40e_pf_host_vf_reset(struct i40e_pf_vf *vf, bool do_hw_reset)
val |= I40E_VPGEN_VFRTRIG_VFSWR_MASK;
I40E_WRITE_REG(hw, I40E_VPGEN_VFRTRIG(vf_id), val);
I40E_WRITE_FLUSH(hw);
- }
#define VFRESET_MAX_WAIT_CNT 100
- /* Wait until VF reset is done */
- for (i = 0; i < VFRESET_MAX_WAIT_CNT; i++) {
- rte_delay_us(10);
- val = I40E_READ_REG(hw, I40E_VPGEN_VFRSTAT(vf_id));
- if (val & I40E_VPGEN_VFRSTAT_VFRD_MASK)
- break;
- }
+ /* Wait until VF reset is done */
+ for (i = 0; i < VFRESET_MAX_WAIT_CNT; i++) {
+ rte_delay_us(10);
+ val = I40E_READ_REG(hw, I40E_VPGEN_VFRSTAT(vf_id));
+ if (val & I40E_VPGEN_VFRSTAT_VFRD_MASK)
+ break;
+ }
- if (i >= VFRESET_MAX_WAIT_CNT) {
- PMD_DRV_LOG(ERR, "VF reset timeout");
- return -ETIMEDOUT;
+ if (i >= VFRESET_MAX_WAIT_CNT) {
+ PMD_DRV_LOG(ERR, "VF reset timeout");
+ return -ETIMEDOUT;
+ }
+ vf->state = I40E_VF_ACTIVE;
}
-
/* This is not first time to do reset, do cleanup job first */
if (vf->vsi) {
/* Disable queues */
@@ -262,7 +262,10 @@ i40e_pf_host_send_msg_to_vf(struct i40e_pf_vf *vf,
{
struct i40e_hw *hw = I40E_PF_TO_HW(vf->pf);
uint16_t abs_vf_id = hw->func_caps.vf_base_id + vf->vf_idx;
- int ret;
+ int ret = I40E_ERR_ADMIN_QUEUE_ERROR;
+
+ if (vf->state == I40E_VF_INACTIVE)
+ return ret;
ret = i40e_aq_send_msg_to_vf(hw, abs_vf_id, opcode, retval,
msg, msglen, NULL);
--
2.7.4
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [dpdk-dev] [PATCH v3] net/i40e: fix PF notify issue when VF not up
2017-07-28 15:48 ` [dpdk-dev] [PATCH v3] " Xiaoyun Li
@ 2017-07-31 2:50 ` Wu, Jingjing
2017-07-31 14:41 ` Ferruh Yigit
0 siblings, 1 reply; 8+ messages in thread
From: Wu, Jingjing @ 2017-07-31 2:50 UTC (permalink / raw)
To: Li, Xiaoyun; +Cc: dev, stable
> -----Original Message-----
> From: Li, Xiaoyun
> Sent: Friday, July 28, 2017 11:48 PM
> To: Wu, Jingjing <jingjing.wu@intel.com>
> Cc: dev@dpdk.org; Li, Xiaoyun <xiaoyun.li@intel.com>; stable@dpdk.org
> Subject: [PATCH v3] net/i40e: fix PF notify issue when VF not up
>
> This patch stops PF from sending messages to inactive VF
> and modifies VF state to active when VF reset is completed.
>
> Fixes: 4861cde46116 ("i40e: new poll mode driver")
> Cc: stable@dpdk.org
>
> Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Thanks
Jingjing
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [dpdk-dev] [PATCH v3] net/i40e: fix PF notify issue when VF not up
2017-07-31 2:50 ` Wu, Jingjing
@ 2017-07-31 14:41 ` Ferruh Yigit
0 siblings, 0 replies; 8+ messages in thread
From: Ferruh Yigit @ 2017-07-31 14:41 UTC (permalink / raw)
To: Wu, Jingjing, Li, Xiaoyun; +Cc: dev, stable
On 7/31/2017 3:50 AM, Wu, Jingjing wrote:
>
>
>> -----Original Message-----
>> From: Li, Xiaoyun
>> Sent: Friday, July 28, 2017 11:48 PM
>> To: Wu, Jingjing <jingjing.wu@intel.com>
>> Cc: dev@dpdk.org; Li, Xiaoyun <xiaoyun.li@intel.com>; stable@dpdk.org
>> Subject: [PATCH v3] net/i40e: fix PF notify issue when VF not up
>>
>> This patch stops PF from sending messages to inactive VF
>> and modifies VF state to active when VF reset is completed.
>>
>> Fixes: 4861cde46116 ("i40e: new poll mode driver")
>> Cc: stable@dpdk.org
>>
>> Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
> Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Applied to dpdk-next-net/master, thanks.
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2017-07-31 14:41 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-07-24 18:42 [dpdk-dev] [PATCH] net/i40e: fix PF notify issue when VF not up Xiaoyun Li
2017-07-26 6:14 ` Yang, Qiming
2017-07-28 11:39 ` [dpdk-dev] [PATCH v2] " Xiaoyun Li
2017-07-28 6:52 ` Wu, Jingjing
2017-07-28 7:06 ` Li, Xiaoyun
2017-07-28 15:48 ` [dpdk-dev] [PATCH v3] " Xiaoyun Li
2017-07-31 2:50 ` Wu, Jingjing
2017-07-31 14:41 ` Ferruh Yigit
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).