* [dpdk-dev] [PATCH] net/mlx5: add define of LRO segment chunk size
@ 2019-12-18 7:51 Dekel Peled
2019-12-19 11:26 ` Raslan Darawsheh
0 siblings, 1 reply; 2+ messages in thread
From: Dekel Peled @ 2019-12-18 7:51 UTC (permalink / raw)
To: matan, viacheslavo, shahafs; +Cc: orika, dev
Maximal size of coalesced LRO segment is set in TIR attributes as
number of chunks of size 256 bytes each.
Current implementation uses the hardcoded value 256 in several places.
This patch adds a definition for this value, and uses this definition
in all relevant places.
A debug message is added to clearly notify the actual configured size.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
---
drivers/net/mlx5/mlx5.h | 5 ++++-
drivers/net/mlx5/mlx5_rxq.c | 15 +++++++++++----
2 files changed, 15 insertions(+), 5 deletions(-)
diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
index 0c3a90e..c3df825 100644
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -218,8 +218,11 @@ struct mlx5_hca_attr {
#define MLX5_LRO_SUPPORTED(dev) \
(((struct mlx5_priv *)((dev)->data->dev_private))->config.lro.supported)
+/* Maximal size of coalesced segment for LRO is set in chunks of 256 Bytes. */
+#define MLX5_LRO_SEG_CHUNK_SIZE 256u
+
/* Maximal size of aggregated LRO packet. */
-#define MLX5_MAX_LRO_SIZE (UINT8_MAX * 256u)
+#define MLX5_MAX_LRO_SIZE (UINT8_MAX * MLX5_LRO_SEG_CHUNK_SIZE)
/* LRO configurations structure. */
struct mlx5_lro_config {
diff --git a/drivers/net/mlx5/mlx5_rxq.c b/drivers/net/mlx5/mlx5_rxq.c
index 986ec01..bbc07db 100644
--- a/drivers/net/mlx5/mlx5_rxq.c
+++ b/drivers/net/mlx5/mlx5_rxq.c
@@ -1717,11 +1717,14 @@ struct mlx5_rxq_obj *
*
* @param dev
* Pointer to Ethernet device.
+ * @param idx
+ * RX queue index.
* @param max_lro_size
* The maximum size for LRO packet.
*/
static void
-mlx5_max_lro_msg_size_adjust(struct rte_eth_dev *dev, uint32_t max_lro_size)
+mlx5_max_lro_msg_size_adjust(struct rte_eth_dev *dev, uint16_t idx,
+ uint32_t max_lro_size)
{
struct mlx5_priv *priv = dev->data->dev_private;
@@ -1730,13 +1733,17 @@ struct mlx5_rxq_obj *
MLX5_MAX_TCP_HDR_OFFSET)
max_lro_size -= MLX5_MAX_TCP_HDR_OFFSET;
max_lro_size = RTE_MIN(max_lro_size, MLX5_MAX_LRO_SIZE);
- assert(max_lro_size >= 256u);
- max_lro_size /= 256u;
+ assert(max_lro_size >= MLX5_LRO_SEG_CHUNK_SIZE);
+ max_lro_size /= MLX5_LRO_SEG_CHUNK_SIZE;
if (priv->max_lro_msg_size)
priv->max_lro_msg_size =
RTE_MIN((uint32_t)priv->max_lro_msg_size, max_lro_size);
else
priv->max_lro_msg_size = max_lro_size;
+ DRV_LOG(DEBUG,
+ "port %u Rx Queue %u max LRO message size adjusted to %u bytes",
+ dev->data->port_id, idx,
+ priv->max_lro_msg_size * MLX5_LRO_SEG_CHUNK_SIZE);
}
/**
@@ -1909,7 +1916,7 @@ struct mlx5_rxq_ctrl *
rte_errno = EINVAL;
goto error;
}
- mlx5_max_lro_msg_size_adjust(dev, max_lro_size);
+ mlx5_max_lro_msg_size_adjust(dev, idx, max_lro_size);
/* Toggle RX checksum offload if hardware supports it. */
tmpl->rxq.csum = !!(offloads & DEV_RX_OFFLOAD_CHECKSUM);
tmpl->rxq.hw_timestamp = !!(offloads & DEV_RX_OFFLOAD_TIMESTAMP);
--
1.8.3.1
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: [dpdk-dev] [PATCH] net/mlx5: add define of LRO segment chunk size
2019-12-18 7:51 [dpdk-dev] [PATCH] net/mlx5: add define of LRO segment chunk size Dekel Peled
@ 2019-12-19 11:26 ` Raslan Darawsheh
0 siblings, 0 replies; 2+ messages in thread
From: Raslan Darawsheh @ 2019-12-19 11:26 UTC (permalink / raw)
To: Dekel Peled, Matan Azrad, Slava Ovsiienko, Shahaf Shuler; +Cc: Ori Kam, dev
Hi,
> -----Original Message-----
> From: dev <dev-bounces@dpdk.org> On Behalf Of Dekel Peled
> Sent: Wednesday, December 18, 2019 9:52 AM
> To: Matan Azrad <matan@mellanox.com>; Slava Ovsiienko
> <viacheslavo@mellanox.com>; Shahaf Shuler <shahafs@mellanox.com>
> Cc: Ori Kam <orika@mellanox.com>; dev@dpdk.org
> Subject: [dpdk-dev] [PATCH] net/mlx5: add define of LRO segment chunk
> size
>
> Maximal size of coalesced LRO segment is set in TIR attributes as
> number of chunks of size 256 bytes each.
> Current implementation uses the hardcoded value 256 in several places.
>
> This patch adds a definition for this value, and uses this definition
> in all relevant places.
> A debug message is added to clearly notify the actual configured size.
>
> Signed-off-by: Dekel Peled <dekelp@mellanox.com>
> Acked-by: Matan Azrad <matan@mellanox.com>
>
> ---
> drivers/net/mlx5/mlx5.h | 5 ++++-
> drivers/net/mlx5/mlx5_rxq.c | 15 +++++++++++----
> 2 files changed, 15 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
> index 0c3a90e..c3df825 100644
> --- a/drivers/net/mlx5/mlx5.h
> +++ b/drivers/net/mlx5/mlx5.h
> @@ -218,8 +218,11 @@ struct mlx5_hca_attr {
> #define MLX5_LRO_SUPPORTED(dev) \
> (((struct mlx5_priv *)((dev)->data->dev_private))-
> >config.lro.supported)
>
> +/* Maximal size of coalesced segment for LRO is set in chunks of 256 Bytes.
> */
> +#define MLX5_LRO_SEG_CHUNK_SIZE 256u
> +
> /* Maximal size of aggregated LRO packet. */
> -#define MLX5_MAX_LRO_SIZE (UINT8_MAX * 256u)
> +#define MLX5_MAX_LRO_SIZE (UINT8_MAX *
> MLX5_LRO_SEG_CHUNK_SIZE)
>
> /* LRO configurations structure. */
> struct mlx5_lro_config {
> diff --git a/drivers/net/mlx5/mlx5_rxq.c b/drivers/net/mlx5/mlx5_rxq.c
> index 986ec01..bbc07db 100644
> --- a/drivers/net/mlx5/mlx5_rxq.c
> +++ b/drivers/net/mlx5/mlx5_rxq.c
> @@ -1717,11 +1717,14 @@ struct mlx5_rxq_obj *
> *
> * @param dev
> * Pointer to Ethernet device.
> + * @param idx
> + * RX queue index.
> * @param max_lro_size
> * The maximum size for LRO packet.
> */
> static void
> -mlx5_max_lro_msg_size_adjust(struct rte_eth_dev *dev, uint32_t
> max_lro_size)
> +mlx5_max_lro_msg_size_adjust(struct rte_eth_dev *dev, uint16_t idx,
> + uint32_t max_lro_size)
> {
> struct mlx5_priv *priv = dev->data->dev_private;
>
> @@ -1730,13 +1733,17 @@ struct mlx5_rxq_obj *
> MLX5_MAX_TCP_HDR_OFFSET)
> max_lro_size -= MLX5_MAX_TCP_HDR_OFFSET;
> max_lro_size = RTE_MIN(max_lro_size, MLX5_MAX_LRO_SIZE);
> - assert(max_lro_size >= 256u);
> - max_lro_size /= 256u;
> + assert(max_lro_size >= MLX5_LRO_SEG_CHUNK_SIZE);
> + max_lro_size /= MLX5_LRO_SEG_CHUNK_SIZE;
> if (priv->max_lro_msg_size)
> priv->max_lro_msg_size =
> RTE_MIN((uint32_t)priv->max_lro_msg_size,
> max_lro_size);
> else
> priv->max_lro_msg_size = max_lro_size;
> + DRV_LOG(DEBUG,
> + "port %u Rx Queue %u max LRO message size adjusted to %u
> bytes",
> + dev->data->port_id, idx,
> + priv->max_lro_msg_size * MLX5_LRO_SEG_CHUNK_SIZE);
> }
>
> /**
> @@ -1909,7 +1916,7 @@ struct mlx5_rxq_ctrl *
> rte_errno = EINVAL;
> goto error;
> }
> - mlx5_max_lro_msg_size_adjust(dev, max_lro_size);
> + mlx5_max_lro_msg_size_adjust(dev, idx, max_lro_size);
> /* Toggle RX checksum offload if hardware supports it. */
> tmpl->rxq.csum = !!(offloads & DEV_RX_OFFLOAD_CHECKSUM);
> tmpl->rxq.hw_timestamp = !!(offloads &
> DEV_RX_OFFLOAD_TIMESTAMP);
> --
> 1.8.3.1
Patch applied to next-net-mlx,
Kindest regards,
Raslan Darawsheh
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-12-19 11:26 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-12-18 7:51 [dpdk-dev] [PATCH] net/mlx5: add define of LRO segment chunk size Dekel Peled
2019-12-19 11:26 ` Raslan Darawsheh
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).