[dpdk-dev] [PATCH v3 0/4] support for netronome nfp-6xxx card
2015-10-16 10:45 UTC (4+ messages)
` [dpdk-dev] [PATCH v3 2/4] nfp-uio: new uio driver for netronome nfp6000 card
` [dpdk-dev] [PATCH v3 3/4] doc: add netronome nfp6000 guide
` [dpdk-dev] [PATCH v3 4/4] tools: add support for nfp_uio
[dpdk-dev] [PATCH v3 00/20] remove pci driver from vdevs
2015-10-16 10:34 UTC (6+ messages)
` [dpdk-dev] [PATCH v3 02/20] librte_ether: add fields from rte_pci_driver to rte_eth_dev_data
` [dpdk-dev] [PATCH v3 07/20] pcap: remove pci device driver
[dpdk-dev] [PATCH 0/4] RSS enhancement on Intel x550 NIC
2015-10-16 10:04 UTC (11+ messages)
` [dpdk-dev] [PATCH 1/4] ixgbe: 512 entries RSS table on x550
` [dpdk-dev] [PATCH 2/4] ixgbe: VF RSS config "
` [dpdk-dev] [PATCH 3/4] ixgbe: VF RSS hash query and update
` [dpdk-dev] FW: "
` [dpdk-dev] [PATCH 4/4] ixgbe: VF RSS reta "
[dpdk-dev] [PATCHv4 0/9] Dynamic RSS Configuration for Bonding
2015-10-16 10:00 UTC (21+ messages)
` [dpdk-dev] [PATCH v5 "
` [dpdk-dev] [PATCH v5 4/9] null: virtual dynamic rss configuration
` [dpdk-dev] [PATCH v5 5/9] null: export eth_dev_null_create
` [dpdk-dev] [PATCH v6 0/9] Dynamic RSS Configuration for Bonding
` [dpdk-dev] [PATCH v6 1/9] bonding: rss dynamic configuration
` [dpdk-dev] [PATCH v6 2/9] null: fix segfault when null_pmd added to bonding
` [dpdk-dev] [PATCH v6 3/9] null: extend number of virtual queues
` [dpdk-dev] [PATCH v6 4/9] null: export eth_dev_null_create
` [dpdk-dev] [PATCH v6 5/9] null: virtual dynamic rss configuration
` [dpdk-dev] [PATCH v6 6/9] test: "
` [dpdk-dev] [PATCH v6 7/9] bonding: per queue stats
` [dpdk-dev] [PATCH v6 8/9] doc: fixed spellings and typos
` [dpdk-dev] [PATCH v6 9/9] doc: dynamic rss configuration for bonding
[dpdk-dev] [PATCH 0/3] vhost: Fix virtio-net on VHOST_USER_RESET_OWNER
2015-10-16 9:08 UTC (4+ messages)
` [dpdk-dev] [PATCH 1/3] vhost: avoid device identifier to be reset to 0 in reset_owner
` [dpdk-dev] [PATCH 2/3] vhost: check that a device exists during reset_owner
` [dpdk-dev] [PATCH 3/3] vhost: protect user_get_vring_base from unknown devices
[dpdk-dev] Unsafe array accesses in rte_sched.c
2015-10-16 8:49 UTC
[dpdk-dev] DPDK patch backlog
2015-10-16 8:45 UTC (3+ messages)
[dpdk-dev] [RFC PATCH v2] Add VHOST PMD
2015-10-16 8:40 UTC (4+ messages)
` [dpdk-dev] [RFC PATCH v2] vhost: "
[dpdk-dev] [PATCH] vhost-user: enable virtio 1.0
2015-10-16 7:56 UTC (8+ messages)
[dpdk-dev] dpdk/vhost-user and VM migration
2015-10-16 7:37 UTC (2+ messages)
[dpdk-dev] Would you check if there is deadlock in rte_distributor_process() librte_distributor?
2015-10-16 6:33 UTC
[dpdk-dev] [PATCH 00/34] update e1000 base driver
2015-10-16 2:51 UTC (78+ messages)
` [dpdk-dev] [PATCH 02/34] e1000/base: add new devices
` [dpdk-dev] [PATCH v2 00/35] update e1000 base code
` [dpdk-dev] [PATCH v2 01/35] e1000/base: update readme and copyright
` [dpdk-dev] [PATCH v2 02/35] e1000/base: add new devices
` [dpdk-dev] [PATCH v2 03/35] e1000/base: fix issue with link flap on 82579
` [dpdk-dev] [PATCH v2 04/35] e1000/base: fix issue with jumbo frame CRC failures in client
` [dpdk-dev] [PATCH v2 05/35] e1000/base: redundant PHY power down for i210
` [dpdk-dev] [PATCH v2 06/35] e1000/base: add return value to the functions of setting receive address register
` [dpdk-dev] [PATCH v2 07/35] e1000/base: add defaults for i210 TX/RX PBSIZE
` [dpdk-dev] [PATCH v2 08/35] e1000/base: remove E1000_WRITE_FLUSH for DH89XXCC_SGMII after commencing HW reset
` [dpdk-dev] [PATCH v2 09/35] e1000/base: add evaluation of e1000_nvm_read return value
` [dpdk-dev] [PATCH v2 10/35] e1000/base: change invariant return to not use variables
` [dpdk-dev] [PATCH v2 11/35] e1000/base: add return value handler when check manage mode
` [dpdk-dev] [PATCH v2 12/35] e1000/base: add return value handler for ESB2 controller init and reset
` [dpdk-dev] [PATCH v2 13/35] e1000/base: add support for inverted format ETrackId
` [dpdk-dev] [PATCH v2 14/35] e1000/base: add EEARBC_I210 for i210
` [dpdk-dev] [PATCH v2 15/35] e1000/base: apply paranoia to macro arguments
` [dpdk-dev] [PATCH v2 16/35] e1000/base: add flags to set eee advertisement modes
` [dpdk-dev] [PATCH v2 17/35] e1000/base: prevent ulp flow if cable connected
` [dpdk-dev] [PATCH v2 18/35] e1000/base: fix TIPG value for non 10 half duplex mode
` [dpdk-dev] [PATCH v2 19/35] e1000/base: add return value for resume workaround
` [dpdk-dev] [PATCH v2 20/35] e1000/base: fix link detect flow
` [dpdk-dev] [PATCH v2 21/35] e1000/base: cleanup NAHUM6LP_HW tags
` [dpdk-dev] [PATCH v2 22/35] e1000/base: add bit for disable packetbuffer read
` [dpdk-dev] [PATCH v2 23/35] e1000/base: K1 flow fixes
` [dpdk-dev] [PATCH v2 24/35] e1000/base: remove FIXME comment
` [dpdk-dev] [PATCH v2 25/35] e1000/base: set correct value of beacon duration
` [dpdk-dev] [PATCH v2 26/35] e1000/base: disable extension header parsing for IPv6
` [dpdk-dev] [PATCH v2 27/35] e1000/base: fix for i354 88E1112 PHY using AutoMedia Detect
` [dpdk-dev] [PATCH v2 28/35] e1000/base: increase timeout of polling bit RSPCIPHY in check_reset_block
` [dpdk-dev] [PATCH v2 29/35] e1000/base: implement 88E1543 PHY initialization
` [dpdk-dev] [PATCH v2 30/35] e1000/base: use the correct i210 register for EEMNGCTL
` [dpdk-dev] [PATCH v2 31/35] e1000/base: move the print to the right position
` [dpdk-dev] [PATCH v2 32/35] e1000/base: synchronization of MAC-PHY interface only on non- ME systems
` [dpdk-dev] [PATCH v2 33/35] e1000/base: fix to enable both ulp and EEE in Sx state
` [dpdk-dev] [PATCH v2 34/35] e1000/base: some minor change
` [dpdk-dev] [PATCH v2 35/35] e1000: add new devices
` [dpdk-dev] [PATCH v3 00/36] update e1000 base code
` [dpdk-dev] [PATCH v3 01/36] e1000/base: update readme and copyright
` [dpdk-dev] [PATCH v3 02/36] e1000/base: add new devices
` [dpdk-dev] [PATCH v3 03/36] e1000/base: fix issue with link flap on 82579
` [dpdk-dev] [PATCH v3 04/36] e1000/base: fix issue with jumbo frame CRC failures in client
` [dpdk-dev] [PATCH v3 05/36] e1000/base: redundant PHY power down for i210
` [dpdk-dev] [PATCH v3 06/36] e1000/base: add return value to the functions of setting receive address register
` [dpdk-dev] [PATCH v3 07/36] e1000/base: add defaults for i210 TX/RX PBSIZE
` [dpdk-dev] [PATCH v3 08/36] e1000/base: remove E1000_WRITE_FLUSH for DH89XXCC_SGMII after commencing HW reset
` [dpdk-dev] [PATCH v3 09/36] e1000/base: add evaluation of e1000_nvm_read return value
` [dpdk-dev] [PATCH v3 10/36] e1000/base: change invariant return to not use variables
` [dpdk-dev] [PATCH v3 11/36] e1000/base: add return value handler when check manage mode
` [dpdk-dev] [PATCH v3 12/36] e1000/base: add return value handler for ESB2 controller init and reset
` [dpdk-dev] [PATCH v3 13/36] e1000/base: add support for inverted format ETrackId
` [dpdk-dev] [PATCH v3 14/36] e1000/base: add EEARBC_I210 for i210
` [dpdk-dev] [PATCH v3 15/36] e1000/base: apply paranoia to macro arguments
` [dpdk-dev] [PATCH v3 16/36] e1000/base: add flags to set eee advertisement modes
` [dpdk-dev] [PATCH v3 17/36] e1000/base: prevent ulp flow if cable connected
` [dpdk-dev] [PATCH v3 18/36] e1000/base: fix TIPG value for non 10 half duplex mode
` [dpdk-dev] [PATCH v3 19/36] e1000/base: add return value for resume workaround
` [dpdk-dev] [PATCH v3 20/36] e1000/base: fix link detect flow
` [dpdk-dev] [PATCH v3 21/36] e1000/base: cleanup NAHUM6LP_HW tags
` [dpdk-dev] [PATCH v3 22/36] e1000/base: add bit for disable packetbuffer read
` [dpdk-dev] [PATCH v3 23/36] e1000/base: K1 flow fixes
` [dpdk-dev] [PATCH v3 24/36] e1000/base: remove FIXME comment
` [dpdk-dev] [PATCH v3 25/36] e1000/base: set correct value of beacon duration
` [dpdk-dev] [PATCH v3 26/36] e1000/base: disable extension header parsing for IPv6
` [dpdk-dev] [PATCH v3 27/36] e1000/base: fix for i354 88E1112 PHY using AutoMedia Detect
` [dpdk-dev] [PATCH v3 28/36] e1000/base: increase timeout of polling bit RSPCIPHY in check_reset_block
` [dpdk-dev] [PATCH v3 29/36] e1000/base: implement 88E1543 PHY initialization
` [dpdk-dev] [PATCH v3 30/36] e1000/base: use the correct i210 register for EEMNGCTL
` [dpdk-dev] [PATCH v3 31/36] e1000/base: move the print to the right position
` [dpdk-dev] [PATCH v3 32/36] e1000/base: synchronization of MAC-PHY interface only on non- ME systems
` [dpdk-dev] [PATCH v3 33/36] e1000/base: fix to enable both ulp and EEE in Sx state
` [dpdk-dev] [PATCH v3 34/36] e1000/base: some minor change
` [dpdk-dev] [PATCH v3 35/36] e1000: add new devices
` [dpdk-dev] [PATCH v3 36/36] doc: update release notes for e1000 base code update
[dpdk-dev] [PATCH] eal: don't reset getopt lib
2015-10-16 2:25 UTC (3+ messages)
[dpdk-dev] I have a problem in setting up DPDK 2.1.0 in Fedora OS release 20 (Heisenbug). I cannot r
2015-10-15 23:46 UTC (7+ messages)
[dpdk-dev] [PATCH] add a dpdk contributors guide
2015-10-15 21:36 UTC (3+ messages)
` [dpdk-dev] [PATCH] doc: add "
[dpdk-dev] Question about unsupported transceivers
2015-10-15 19:53 UTC (6+ messages)
[dpdk-dev] Why rte_eal_ivshmem_obj_initd() does not add memory pools to rte_mempool_tailq list?
2015-10-15 16:45 UTC
[dpdk-dev] ixgbe: prefetch packet headers in vector PMD receive function
2015-10-15 15:43 UTC (11+ messages)
` [dpdk-dev] [PATCH] "
[dpdk-dev] Question about unsupported transceivers
2015-10-15 15:33 UTC (6+ messages)
[dpdk-dev] [PATCH] eal: default to one memory channel if not specified
2015-10-15 13:12 UTC (11+ messages)
` [dpdk-dev] [PATCH 0/2] Provide reasonable default to -n
` [dpdk-dev] [PATCH 1/2] mempool: use a better default for number of memory channels
` [dpdk-dev] [PATCH 2/2] eal: make the -n argument optional
[dpdk-dev] Segmentation fault when bonding ports on Mellanox ConnectX-3
2015-10-15 13:12 UTC (6+ messages)
[dpdk-dev] Mellanox PMD failure w/DPDK-2.1.0 and MLNX_OFED-3.1-1.0.3
2015-10-15 12:50 UTC (8+ messages)
[dpdk-dev] [PATCH] eal:Map rte cfg and uio at the end of hugepage mem
2015-10-15 12:46 UTC (3+ messages)
[dpdk-dev] [PATCH 0/7] Add hierarchical support to make install
2015-10-15 12:32 UTC (5+ messages)
` [dpdk-dev] [PATCH v4 0/7] Add instalation rules for dpdk files
[dpdk-dev] Calling rte_eth_rx_burst() multiple times
2015-10-15 11:51 UTC (4+ messages)
[dpdk-dev] [PATCH 0/3] fm10k: add VMDQ support
2015-10-15 11:07 UTC (4+ messages)
` [dpdk-dev] [PATCH 1/3] fm10k: add multi-queue checking
[dpdk-dev] [PATCH] examples/vmdq: Fix the core dump issue when mem_pool is more than 34
2015-10-15 7:54 UTC (3+ messages)
[dpdk-dev] [PATCH v4] mbuf/ip_frag: move mbuf chaining to common code
2015-10-15 7:01 UTC
[dpdk-dev] [PATCH] fm10k: add Intel Boulder Rapid NIC support
2015-10-15 5:25 UTC (2+ messages)
[dpdk-dev] [Q] l2fwd in examples directory
2015-10-15 2:08 UTC (2+ messages)
[dpdk-dev] [PATCH] Found a bug related to getopt() in eal/bsd module
2015-10-15 1:40 UTC (8+ messages)
` [dpdk-dev] [PATCH] eal/bsd: reinitialize optind and optreset to 1
[dpdk-dev] New mailing list for users
2015-10-14 23:26 UTC
[dpdk-dev] [PATCH] mem: Command line option to delete hugepage backing files
2015-10-14 18:59 UTC (2+ messages)
[dpdk-dev] [PATCHv5 0/8] ethdev: add new API to retrieve RX/TX queue information
2015-10-14 18:44 UTC (25+ messages)
` [dpdk-dev] [PATCHv5 1/8] "
` [dpdk-dev] [dpdk-dev, PATCHv5, "
` [dpdk-dev] [PATCHv5 2/8] i40e: add support for eth_(rxq|txq)_info_get and (rx|tx)_desc_lim
` [dpdk-dev] [PATCHv5 3/8] ixgbe: "
` [dpdk-dev] [PATCHv5 4/8] e1000: "
` [dpdk-dev] [PATCHv5 5/8] fm10k: add HW specific desc_lim data into dev_info
` [dpdk-dev] [PATCHv5 6/8] cxgbe: "
` [dpdk-dev] [PATCHv5 7/8] vmxnet3: "
` [dpdk-dev] [PATCHv5 8/8] testpmd: add new command to display RX/TX queue information
[PATCH v2 0/4] Support for Netronome´s NFP-6xxx card
2015-10-14 17:16 UTC (2+ messages)
` [dpdk-dev] [PATCH v2 0/4] Support for Netronome´s "
[dpdk-dev] [PATCH v2] ixgbe: remove rx jabber from ierrors
2015-10-14 17:12 UTC
[dpdk-dev] DPDK User Space: Session onUseability and Ease of Use
2015-10-14 16:34 UTC (7+ messages)
[dpdk-dev] [PATCH] ixgbe: remove rx jabber from ierrors
2015-10-14 15:40 UTC
[dpdk-dev] [PATCH] devargs: add blacklisting by linux interface name
2015-10-14 13:41 UTC (4+ messages)
` [dpdk-dev] [PATCH v2] "
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).