From: Raslan Darawsheh <rasland@mellanox.com>
To: Bing Zhao <bingz@mellanox.com>,
Slava Ovsiienko <viacheslavo@mellanox.com>
Cc: Ori Kam <orika@mellanox.com>, Matan Azrad <matan@mellanox.com>,
"dev@dpdk.org" <dev@dpdk.org>,
"stable@dpdk.org" <stable@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v4] net/mlx5: fix header modify action validation
Date: Tue, 21 Apr 2020 14:59:11 +0000 [thread overview]
Message-ID: <AM0PR05MB670732572F94BB124D984DB2C2D50@AM0PR05MB6707.eurprd05.prod.outlook.com> (raw)
In-Reply-To: <1587477814-207655-1-git-send-email-bingz@mellanox.com>
Hi,
> -----Original Message-----
> From: Bing Zhao <bingz@mellanox.com>
> Sent: Tuesday, April 21, 2020 5:04 PM
> To: Slava Ovsiienko <viacheslavo@mellanox.com>; Raslan Darawsheh
> <rasland@mellanox.com>
> Cc: Ori Kam <orika@mellanox.com>; Matan Azrad <matan@mellanox.com>;
> dev@dpdk.org; stable@dpdk.org
> Subject: [PATCH v4] net/mlx5: fix header modify action validation
>
> The header modify actions number supported now has some limitation,
> and it is decided by both driver and hardware. If the configuration
> is different or the table to insert the flow is different, the result
> might be different if the flow contains header modify actions.
> Currently, the actual action number could only be calculated in the
> later stage called translate, from user specified value to the driver
> format. And the action numbers checking is missed in the flow
> validation. So PMD will return incorrect result to indicate the
> flow actions are valid by rte_flow_validate but then it will fail
> when calling rte_flow_create.
>
> Adding some simple checking in the validation will help to get rid
> of this incorrect checking. Most of the actions will only consume 1
> SW action field except the MAC address and IPv6 address. And from
> SW POV, the maximal action fields for these will be consumed even if
> only part of such field will be modified because that there is no
> mask in the flow actions and the mask will always be all ONEs.
>
> The metering or extra metadata supports will cost one more action.
>
> Fixes: 9597330c6844 ("net/mlx5: update modify header action translator")
> Cc: viacheslavo@mellanox.com
> Cc: stable@dpdk.org
>
> Signed-off-by: Bing Zhao <bingz@mellanox.com>
> Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
> ---
> v4: rebase to solve the conflict
> v3: change the title of commit message
> v2: take hairpin, metadata and meter into consideration
> ---
> drivers/net/mlx5/mlx5_flow.c | 58 +++++++++++++++++++----------------
> drivers/net/mlx5/mlx5_flow.h | 18 +++++++++++
> drivers/net/mlx5/mlx5_flow_dv.c | 63
> +++++++++++++++++++++++++++++++++-----
> drivers/net/mlx5/mlx5_flow_verbs.c | 3 ++
> 4 files changed, 108 insertions(+), 34 deletions(-)
>
> diff --git a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c
> index 109d71e..84aa069 100644
> --- a/drivers/net/mlx5/mlx5_flow.c
> +++ b/drivers/net/mlx5/mlx5_flow.c
> @@ -2342,6 +2342,7 @@ uint32_t mlx5_flow_adjust_priority(struct
> rte_eth_dev *dev, int32_t priority,
> const struct rte_flow_item items[] __rte_unused,
> const struct rte_flow_action actions[] __rte_unused,
> bool external __rte_unused,
> + int hairpin __rte_unused,
> struct rte_flow_error *error)
> {
> return rte_flow_error_set(error, ENOTSUP,
> @@ -2457,6 +2458,8 @@ uint32_t mlx5_flow_adjust_priority(struct
> rte_eth_dev *dev, int32_t priority,
> * Pointer to the list of actions.
> * @param[in] external
> * This flow rule is created by request external to PMD.
> + * @param[in] hairpin
> + * Number of hairpin TX actions, 0 means classic flow.
> * @param[out] error
> * Pointer to the error structure.
> *
> @@ -2468,13 +2471,14 @@ uint32_t mlx5_flow_adjust_priority(struct
> rte_eth_dev *dev, int32_t priority,
> const struct rte_flow_attr *attr,
> const struct rte_flow_item items[],
> const struct rte_flow_action actions[],
> - bool external, struct rte_flow_error *error)
> + bool external, int hairpin, struct rte_flow_error *error)
> {
> const struct mlx5_flow_driver_ops *fops;
> enum mlx5_flow_drv_type type = flow_get_drv_type(dev, attr);
>
> fops = flow_get_drv_ops(type);
> - return fops->validate(dev, attr, items, actions, external, error);
> + return fops->validate(dev, attr, items, actions, external,
> + hairpin, error);
> }
>
> /**
> @@ -2636,27 +2640,6 @@ uint32_t mlx5_flow_adjust_priority(struct
> rte_eth_dev *dev, int32_t priority,
> }
>
> /**
> - * Validate a flow supported by the NIC.
> - *
> - * @see rte_flow_validate()
> - * @see rte_flow_ops
> - */
> -int
> -mlx5_flow_validate(struct rte_eth_dev *dev,
> - const struct rte_flow_attr *attr,
> - const struct rte_flow_item items[],
> - const struct rte_flow_action actions[],
> - struct rte_flow_error *error)
> -{
> - int ret;
> -
> - ret = flow_drv_validate(dev, attr, items, actions, true, error);
> - if (ret < 0)
> - return ret;
> - return 0;
> -}
> -
> -/**
> * Get RSS action from the action list.
> *
> * @param[in] actions
> @@ -4271,15 +4254,16 @@ uint32_t mlx5_flow_adjust_priority(struct
> rte_eth_dev *dev, int32_t priority,
> const struct rte_flow_action *p_actions_rx = actions;
> uint32_t i;
> uint32_t idx = 0;
> - int hairpin_flow = 0;
> + int hairpin_flow;
> uint32_t hairpin_id = 0;
> struct rte_flow_attr attr_tx = { .priority = 0 };
> - int ret = flow_drv_validate(dev, attr, items, p_actions_rx, external,
> - error);
> + int ret;
>
> + hairpin_flow = flow_check_hairpin_split(dev, attr, actions);
> + ret = flow_drv_validate(dev, attr, items, p_actions_rx,
> + external, hairpin_flow, error);
> if (ret < 0)
> return 0;
> - hairpin_flow = flow_check_hairpin_split(dev, attr, actions);
> if (hairpin_flow > 0) {
> if (hairpin_flow > MLX5_MAX_SPLIT_ACTIONS) {
> rte_errno = EINVAL;
> @@ -4471,6 +4455,26 @@ struct rte_flow *
> }
>
> /**
> + * Validate a flow supported by the NIC.
> + *
> + * @see rte_flow_validate()
> + * @see rte_flow_ops
> + */
> +int
> +mlx5_flow_validate(struct rte_eth_dev *dev,
> + const struct rte_flow_attr *attr,
> + const struct rte_flow_item items[],
> + const struct rte_flow_action actions[],
> + struct rte_flow_error *error)
> +{
> + int hairpin_flow;
> +
> + hairpin_flow = flow_check_hairpin_split(dev, attr, actions);
> + return flow_drv_validate(dev, attr, items, actions,
> + true, hairpin_flow, error);
> +}
> +
> +/**
> * Create a flow.
> *
> * @see rte_flow_create()
> diff --git a/drivers/net/mlx5/mlx5_flow.h b/drivers/net/mlx5/mlx5_flow.h
> index 74017cf..e9ed793 100644
> --- a/drivers/net/mlx5/mlx5_flow.h
> +++ b/drivers/net/mlx5/mlx5_flow.h
> @@ -332,6 +332,23 @@ enum mlx5_feature_name {
> #define MLX5_ENCAPSULATION_DECISION_SIZE (sizeof(struct
> rte_flow_item_eth) + \
> sizeof(struct rte_flow_item_ipv4))
>
> +/* Software header modify action numbers of a flow. */
> +#define MLX5_ACT_NUM_MDF_IPV4 1
> +#define MLX5_ACT_NUM_MDF_IPV6 4
> +#define MLX5_ACT_NUM_MDF_MAC 2
> +#define MLX5_ACT_NUM_MDF_VID 1
> +#define MLX5_ACT_NUM_MDF_PORT 2
> +#define MLX5_ACT_NUM_MDF_TTL 1
> +#define MLX5_ACT_NUM_DEC_TTL MLX5_ACT_NUM_MDF_TTL
> +#define MLX5_ACT_NUM_MDF_TCPSEQ 1
> +#define MLX5_ACT_NUM_MDF_TCPACK 1
> +#define MLX5_ACT_NUM_SET_REG 1
> +#define MLX5_ACT_NUM_SET_TAG 1
> +#define MLX5_ACT_NUM_CPY_MREG
> MLX5_ACT_NUM_SET_TAG
> +#define MLX5_ACT_NUM_SET_MARK
> MLX5_ACT_NUM_SET_TAG
> +#define MLX5_ACT_NUM_SET_META
> MLX5_ACT_NUM_SET_TAG
> +#define MLX5_ACT_NUM_SET_DSCP 1
> +
> enum mlx5_flow_drv_type {
> MLX5_FLOW_TYPE_MIN,
> MLX5_FLOW_TYPE_DV,
> @@ -812,6 +829,7 @@ typedef int (*mlx5_flow_validate_t)(struct
> rte_eth_dev *dev,
> const struct rte_flow_item items[],
> const struct rte_flow_action actions[],
> bool external,
> + int hairpin,
> struct rte_flow_error *error);
> typedef struct mlx5_flow *(*mlx5_flow_prepare_t)
> (struct rte_eth_dev *dev, const struct rte_flow_attr *attr,
> diff --git a/drivers/net/mlx5/mlx5_flow_dv.c
> b/drivers/net/mlx5/mlx5_flow_dv.c
> index e156c79..fe6072d 100644
> --- a/drivers/net/mlx5/mlx5_flow_dv.c
> +++ b/drivers/net/mlx5/mlx5_flow_dv.c
> @@ -434,6 +434,7 @@ struct field_modify_info modify_tcp[] = {
> /* Fetch variable byte size mask from the array. */
> mask = flow_dv_fetch_field((const uint8_t *)item->mask +
> field->offset, field->size);
> + MLX5_ASSERT(mask);
> if (!mask) {
> ++field;
> continue;
> @@ -4490,7 +4491,9 @@ struct field_modify_info modify_tcp[] = {
> * Pointer to error structure.
> *
> * @return
> - * 0 on success, a negative errno value otherwise and rte_errno is set.
> + * - 0 on success and non root table.
> + * - 1 on success and root table.
> + * - a negative errno value otherwise and rte_errno is set.
> */
> static int
> flow_dv_validate_attributes(struct rte_eth_dev *dev,
> @@ -4500,6 +4503,7 @@ struct field_modify_info modify_tcp[] = {
> {
> struct mlx5_priv *priv = dev->data->dev_private;
> uint32_t priority_max = priv->config.flow_prio - 1;
> + int ret = 0;
>
> #ifndef HAVE_MLX5DV_DR
> if (attributes->group)
> @@ -4508,14 +4512,15 @@ struct field_modify_info modify_tcp[] = {
> NULL,
> "groups are not supported");
> #else
> - uint32_t table;
> - int ret;
> + uint32_t table = 0;
>
> ret = mlx5_flow_group_to_table(attributes, external,
> attributes->group, !!priv->fdb_def_rule,
> &table, error);
> if (ret)
> return ret;
> + if (!table)
> + ret = MLX5DV_DR_ACTION_FLAGS_ROOT_LEVEL;
> #endif
> if (attributes->priority != MLX5_FLOW_PRIO_RSVD &&
> attributes->priority >= priority_max)
> @@ -4545,7 +4550,7 @@ struct field_modify_info modify_tcp[] = {
> RTE_FLOW_ERROR_TYPE_ATTR,
> NULL,
> "must specify exactly one of "
> "ingress or egress");
> - return 0;
> + return ret;
> }
>
> /**
> @@ -4561,6 +4566,8 @@ struct field_modify_info modify_tcp[] = {
> * Pointer to the list of actions.
> * @param[in] external
> * This flow rule is created by request external to PMD.
> + * @param[in] hairpin
> + * Number of hairpin TX actions, 0 means classic flow.
> * @param[out] error
> * Pointer to the error structure.
> *
> @@ -4571,7 +4578,7 @@ struct field_modify_info modify_tcp[] = {
> flow_dv_validate(struct rte_eth_dev *dev, const struct rte_flow_attr *attr,
> const struct rte_flow_item items[],
> const struct rte_flow_action actions[],
> - bool external, struct rte_flow_error *error)
> + bool external, int hairpin, struct rte_flow_error *error)
> {
> int ret;
> uint64_t action_flags = 0;
> @@ -4618,12 +4625,15 @@ struct field_modify_info modify_tcp[] = {
> struct mlx5_dev_config *dev_conf = &priv->config;
> uint16_t queue_index = 0xFFFF;
> const struct rte_flow_item_vlan *vlan_m = NULL;
> + int16_t rw_act_num = 0;
> + uint64_t is_root;
>
> if (items == NULL)
> return -1;
> ret = flow_dv_validate_attributes(dev, attr, external, error);
> if (ret < 0)
> return ret;
> + is_root = (uint64_t)ret;
> for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
> int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
> int type = items->type;
> @@ -4900,6 +4910,7 @@ struct field_modify_info modify_tcp[] = {
> action_flags |= MLX5_FLOW_ACTION_FLAG;
> ++actions_n;
> }
> + rw_act_num += MLX5_ACT_NUM_SET_MARK;
> break;
> case RTE_FLOW_ACTION_TYPE_MARK:
> ret = flow_dv_validate_action_mark(dev, actions,
> @@ -4918,6 +4929,7 @@ struct field_modify_info modify_tcp[] = {
> action_flags |= MLX5_FLOW_ACTION_MARK;
> ++actions_n;
> }
> + rw_act_num += MLX5_ACT_NUM_SET_MARK;
> break;
> case RTE_FLOW_ACTION_TYPE_SET_META:
> ret = flow_dv_validate_action_set_meta(dev,
> actions,
> @@ -4929,6 +4941,7 @@ struct field_modify_info modify_tcp[] = {
> if (!(action_flags &
> MLX5_FLOW_MODIFY_HDR_ACTIONS))
> ++actions_n;
> action_flags |= MLX5_FLOW_ACTION_SET_META;
> + rw_act_num += MLX5_ACT_NUM_SET_META;
> break;
> case RTE_FLOW_ACTION_TYPE_SET_TAG:
> ret = flow_dv_validate_action_set_tag(dev, actions,
> @@ -4940,6 +4953,7 @@ struct field_modify_info modify_tcp[] = {
> if (!(action_flags &
> MLX5_FLOW_MODIFY_HDR_ACTIONS))
> ++actions_n;
> action_flags |= MLX5_FLOW_ACTION_SET_TAG;
> + rw_act_num += MLX5_ACT_NUM_SET_TAG;
> break;
> case RTE_FLOW_ACTION_TYPE_DROP:
> ret = mlx5_flow_validate_action_drop(action_flags,
> @@ -5017,6 +5031,7 @@ struct field_modify_info modify_tcp[] = {
> return ret;
> /* Count VID with push_vlan command. */
> action_flags |=
> MLX5_FLOW_ACTION_OF_SET_VLAN_VID;
> + rw_act_num += MLX5_ACT_NUM_MDF_VID;
> break;
> case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP:
> case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP:
> @@ -5078,8 +5093,15 @@ struct field_modify_info modify_tcp[] = {
>
> RTE_FLOW_ACTION_TYPE_SET_MAC_SRC ?
>
> MLX5_FLOW_ACTION_SET_MAC_SRC :
>
> MLX5_FLOW_ACTION_SET_MAC_DST;
> + /*
> + * Even if the source and destination MAC addresses
> have
> + * overlap in the header with 4B alignment, the
> convert
> + * function will handle them separately and 4 SW
> actions
> + * will be created. And 2 actions will be added each
> + * time no matter how many bytes of address will be
> set.
> + */
> + rw_act_num += MLX5_ACT_NUM_MDF_MAC;
> break;
> -
> case RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC:
> case RTE_FLOW_ACTION_TYPE_SET_IPV4_DST:
> ret =
> flow_dv_validate_action_modify_ipv4(action_flags,
> @@ -5095,6 +5117,7 @@ struct field_modify_info modify_tcp[] = {
>
> RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC ?
>
> MLX5_FLOW_ACTION_SET_IPV4_SRC :
>
> MLX5_FLOW_ACTION_SET_IPV4_DST;
> + rw_act_num += MLX5_ACT_NUM_MDF_IPV4;
> break;
> case RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC:
> case RTE_FLOW_ACTION_TYPE_SET_IPV6_DST:
> @@ -5117,6 +5140,7 @@ struct field_modify_info modify_tcp[] = {
>
> RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC ?
>
> MLX5_FLOW_ACTION_SET_IPV6_SRC :
>
> MLX5_FLOW_ACTION_SET_IPV6_DST;
> + rw_act_num += MLX5_ACT_NUM_MDF_IPV6;
> break;
> case RTE_FLOW_ACTION_TYPE_SET_TP_SRC:
> case RTE_FLOW_ACTION_TYPE_SET_TP_DST:
> @@ -5133,6 +5157,7 @@ struct field_modify_info modify_tcp[] = {
>
> RTE_FLOW_ACTION_TYPE_SET_TP_SRC ?
>
> MLX5_FLOW_ACTION_SET_TP_SRC :
>
> MLX5_FLOW_ACTION_SET_TP_DST;
> + rw_act_num += MLX5_ACT_NUM_MDF_PORT;
> break;
> case RTE_FLOW_ACTION_TYPE_DEC_TTL:
> case RTE_FLOW_ACTION_TYPE_SET_TTL:
> @@ -5149,6 +5174,7 @@ struct field_modify_info modify_tcp[] = {
> RTE_FLOW_ACTION_TYPE_SET_TTL ?
>
> MLX5_FLOW_ACTION_SET_TTL :
>
> MLX5_FLOW_ACTION_DEC_TTL;
> + rw_act_num += MLX5_ACT_NUM_MDF_TTL;
> break;
> case RTE_FLOW_ACTION_TYPE_JUMP:
> ret = flow_dv_validate_action_jump(actions,
> @@ -5176,6 +5202,7 @@ struct field_modify_info modify_tcp[] = {
>
> RTE_FLOW_ACTION_TYPE_INC_TCP_SEQ ?
>
> MLX5_FLOW_ACTION_INC_TCP_SEQ :
>
> MLX5_FLOW_ACTION_DEC_TCP_SEQ;
> + rw_act_num += MLX5_ACT_NUM_MDF_TCPSEQ;
> break;
> case RTE_FLOW_ACTION_TYPE_INC_TCP_ACK:
> case RTE_FLOW_ACTION_TYPE_DEC_TCP_ACK:
> @@ -5193,10 +5220,13 @@ struct field_modify_info modify_tcp[] = {
>
> RTE_FLOW_ACTION_TYPE_INC_TCP_ACK ?
>
> MLX5_FLOW_ACTION_INC_TCP_ACK :
>
> MLX5_FLOW_ACTION_DEC_TCP_ACK;
> + rw_act_num += MLX5_ACT_NUM_MDF_TCPACK;
> break;
> - case MLX5_RTE_FLOW_ACTION_TYPE_TAG:
> case MLX5_RTE_FLOW_ACTION_TYPE_MARK:
> + break;
> + case MLX5_RTE_FLOW_ACTION_TYPE_TAG:
> case MLX5_RTE_FLOW_ACTION_TYPE_COPY_MREG:
> + rw_act_num += MLX5_ACT_NUM_SET_TAG;
> break;
> case RTE_FLOW_ACTION_TYPE_METER:
> ret = mlx5_flow_validate_action_meter(dev,
> @@ -5207,6 +5237,8 @@ struct field_modify_info modify_tcp[] = {
> return ret;
> action_flags |= MLX5_FLOW_ACTION_METER;
> ++actions_n;
> + /* Meter action will add one more TAG action. */
> + rw_act_num += MLX5_ACT_NUM_SET_TAG;
> break;
> case RTE_FLOW_ACTION_TYPE_SET_IPV4_DSCP:
> ret = flow_dv_validate_action_modify_ipv4_dscp
> @@ -5220,6 +5252,7 @@ struct field_modify_info modify_tcp[] = {
> if (!(action_flags &
> MLX5_FLOW_MODIFY_HDR_ACTIONS))
> ++actions_n;
> action_flags |=
> MLX5_FLOW_ACTION_SET_IPV4_DSCP;
> + rw_act_num += MLX5_ACT_NUM_SET_DSCP;
> break;
> case RTE_FLOW_ACTION_TYPE_SET_IPV6_DSCP:
> ret = flow_dv_validate_action_modify_ipv6_dscp
> @@ -5233,6 +5266,7 @@ struct field_modify_info modify_tcp[] = {
> if (!(action_flags &
> MLX5_FLOW_MODIFY_HDR_ACTIONS))
> ++actions_n;
> action_flags |=
> MLX5_FLOW_ACTION_SET_IPV6_DSCP;
> + rw_act_num += MLX5_ACT_NUM_SET_DSCP;
> break;
> default:
> return rte_flow_error_set(error, ENOTSUP,
> @@ -5305,6 +5339,21 @@ struct field_modify_info modify_tcp[] = {
> NULL, "encap is not
> supported"
> " for ingress traffic");
> }
> + /* Hairpin flow will add one more TAG action. */
> + if (hairpin > 0)
> + rw_act_num += MLX5_ACT_NUM_SET_TAG;
> + /* extra metadata enabled: one more TAG action will be add. */
> + if (dev_conf->dv_flow_en &&
> + dev_conf->dv_xmeta_en != MLX5_XMETA_MODE_LEGACY &&
> + mlx5_flow_ext_mreg_supported(dev))
> + rw_act_num += MLX5_ACT_NUM_SET_TAG;
> + if ((uint32_t)rw_act_num >=
> + flow_dv_modify_hdr_action_max(dev, is_root)) {
> + return rte_flow_error_set(error, ENOTSUP,
> + RTE_FLOW_ERROR_TYPE_ACTION,
> + NULL, "too many header modify"
> + " actions to support");
> + }
> return 0;
> }
>
> diff --git a/drivers/net/mlx5/mlx5_flow_verbs.c
> b/drivers/net/mlx5/mlx5_flow_verbs.c
> index 722220c..d20098c 100644
> --- a/drivers/net/mlx5/mlx5_flow_verbs.c
> +++ b/drivers/net/mlx5/mlx5_flow_verbs.c
> @@ -1108,6 +1108,8 @@
> * Pointer to the list of actions.
> * @param[in] external
> * This flow rule is created by request external to PMD.
> + * @param[in] hairpin
> + * Number of hairpin TX actions, 0 means classic flow.
> * @param[out] error
> * Pointer to the error structure.
> *
> @@ -1120,6 +1122,7 @@
> const struct rte_flow_item items[],
> const struct rte_flow_action actions[],
> bool external __rte_unused,
> + int hairpin __rte_unused,
> struct rte_flow_error *error)
> {
> int ret;
> --
> 1.8.3.1
Patch applied to next-net-mlx,
Kindest regards,
Raslan Darawsheh
prev parent reply other threads:[~2020-04-21 14:59 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-19 14:27 [dpdk-dev] [PATCH] net/mlx5: fix the modify checking in flow validate Bing Zhao
2020-04-13 14:37 ` [dpdk-dev] [PATCH v2] " Bing Zhao
2020-04-14 7:53 ` [dpdk-dev] [PATCH v3] net/mlx5: fix header modify action validation Bing Zhao
2020-04-21 14:03 ` [dpdk-dev] [PATCH v4] " Bing Zhao
2020-04-21 14:59 ` Raslan Darawsheh [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=AM0PR05MB670732572F94BB124D984DB2C2D50@AM0PR05MB6707.eurprd05.prod.outlook.com \
--to=rasland@mellanox.com \
--cc=bingz@mellanox.com \
--cc=dev@dpdk.org \
--cc=matan@mellanox.com \
--cc=orika@mellanox.com \
--cc=stable@dpdk.org \
--cc=viacheslavo@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).