From: Raslan Darawsheh <rasland@mellanox.com>
To: Raslan Darawsheh <rasland@mellanox.com>,
Slava Ovsiienko <viacheslavo@mellanox.com>,
Matan Azrad <matan@mellanox.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>, Ori Kam <orika@mellanox.com>,
"stable@dpdk.org" <stable@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH] net/mlx5: fix vxlan-gpe item translation
Date: Sun, 2 Feb 2020 13:22:35 +0000 [thread overview]
Message-ID: <AM0PR05MB67074043DEB2ED3393479D67C2010@AM0PR05MB6707.eurprd05.prod.outlook.com> (raw)
In-Reply-To: <1580634775-645-1-git-send-email-rasland@mellanox.com>
Hi,
> -----Original Message-----
> From: dev <dev-bounces@dpdk.org> On Behalf Of Raslan Darawsheh
> Sent: Sunday, February 2, 2020 11:13 AM
> To: slava@monjalon.net; Matan Azrad <matan@mellanox.com>
> Cc: dev@dpdk.org; Ori Kam <orika@mellanox.com>; stable@dpdk.org
> Subject: [dpdk-dev] [PATCH] net/mlx5: fix vxlan-gpe item translation
>
> Currently, when using vxlan-gpe or vxlan item in the flow
> both are being treated the same with flags 0x8 in vxlan
> header. which mean the matching of the item vxlan-gpe
> will match any vxlan packet.
>
> This fix the translation of vxlan gpe item into pmd flow
> item. which will by default set the flags to vxlan-gpe
> to be 0xc.
>
> Fixes: 3d694341 ("net/mlx5: add Direct Verbs validation function")
> Cc: stable@dpdk.org
>
> Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
> Acked-by: Matan Azrad matan@mellanox.com
> ---
> drivers/net/mlx5/mlx5_flow_dv.c | 75
> +++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 73 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/mlx5/mlx5_flow_dv.c
> b/drivers/net/mlx5/mlx5_flow_dv.c
> index d51d17d..2878393 100644
> --- a/drivers/net/mlx5/mlx5_flow_dv.c
> +++ b/drivers/net/mlx5/mlx5_flow_dv.c
> @@ -5779,6 +5779,76 @@ flow_dv_translate_item_vxlan(void *matcher,
> void *key,
> }
>
> /**
> + * Add VXLAN-GPE item to matcher and to the value.
> + *
> + * @param[in, out] matcher
> + * Flow matcher.
> + * @param[in, out] key
> + * Flow matcher value.
> + * @param[in] item
> + * Flow pattern to translate.
> + * @param[in] inner
> + * Item is inner pattern.
> + */
> +
> +static void
> +flow_dv_translate_item_vxlan_gpe(void *matcher, void *key,
> + const struct rte_flow_item *item, int inner)
> +{
> + const struct rte_flow_item_vxlan_gpe *vxlan_m = item->mask;
> + const struct rte_flow_item_vxlan_gpe *vxlan_v = item->spec;
> + void *headers_m;
> + void *headers_v;
> + void *misc_m =
> + MLX5_ADDR_OF(fte_match_param, matcher,
> misc_parameters_3);
> + void *misc_v =
> + MLX5_ADDR_OF(fte_match_param, key,
> misc_parameters_3);
> + char *vni_m;
> + char *vni_v;
> + uint16_t dport;
> + int size;
> + int i;
> + uint8_t flags_m = 0xff;
> + uint8_t flags_v = 0xc;
> +
> + if (inner) {
> + headers_m = MLX5_ADDR_OF(fte_match_param, matcher,
> + inner_headers);
> + headers_v = MLX5_ADDR_OF(fte_match_param, key,
> inner_headers);
> + } else {
> + headers_m = MLX5_ADDR_OF(fte_match_param, matcher,
> + outer_headers);
> + headers_v = MLX5_ADDR_OF(fte_match_param, key,
> outer_headers);
> + }
> + dport = item->type == RTE_FLOW_ITEM_TYPE_VXLAN ?
> + MLX5_UDP_PORT_VXLAN : MLX5_UDP_PORT_VXLAN_GPE;
> + if (!MLX5_GET16(fte_match_set_lyr_2_4, headers_v, udp_dport)) {
> + MLX5_SET(fte_match_set_lyr_2_4, headers_m, udp_dport,
> 0xFFFF);
> + MLX5_SET(fte_match_set_lyr_2_4, headers_v, udp_dport,
> dport);
> + }
> + if (!vxlan_v)
> + return;
> + if (!vxlan_m)
> + vxlan_m = &rte_flow_item_vxlan_gpe_mask;
> + size = sizeof(vxlan_m->vni);
> + vni_m = MLX5_ADDR_OF(fte_match_set_misc3, misc_m,
> outer_vxlan_gpe_vni);
> + vni_v = MLX5_ADDR_OF(fte_match_set_misc3, misc_v,
> outer_vxlan_gpe_vni);
> + memcpy(vni_m, vxlan_m->vni, size);
> + for (i = 0; i < size; ++i)
> + vni_v[i] = vni_m[i] & vxlan_v->vni[i];
> + if (vxlan_m->flags) {
> + flags_m = vxlan_m->flags;
> + flags_v = vxlan_v->flags;
> + }
> + MLX5_SET(fte_match_set_misc3, misc_m, outer_vxlan_gpe_flags,
> flags_m);
> + MLX5_SET(fte_match_set_misc3, misc_v, outer_vxlan_gpe_flags,
> flags_v);
> + MLX5_SET(fte_match_set_misc3, misc_m,
> outer_vxlan_gpe_next_protocol,
> + vxlan_m->protocol);
> + MLX5_SET(fte_match_set_misc3, misc_v,
> outer_vxlan_gpe_next_protocol,
> + vxlan_v->protocol);
> +}
> +
> +/**
> * Add Geneve item to matcher and to the value.
> *
> * @param[in, out] matcher
> @@ -7559,8 +7629,9 @@ __flow_dv_translate(struct rte_eth_dev *dev,
> last_item = MLX5_FLOW_LAYER_VXLAN;
> break;
> case RTE_FLOW_ITEM_TYPE_VXLAN_GPE:
> - flow_dv_translate_item_vxlan(match_mask,
> match_value,
> - items, tunnel);
> + flow_dv_translate_item_vxlan_gpe(match_mask,
> + match_value, items,
> + tunnel);
> last_item = MLX5_FLOW_LAYER_VXLAN_GPE;
> break;
> case RTE_FLOW_ITEM_TYPE_GENEVE:
> --
> 2.7.4
Patch applied to next-net-mlx,
Kindest regards,
Raslan Darawsheh
prev parent reply other threads:[~2020-02-02 13:22 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-02 9:12 Raslan Darawsheh
2020-02-02 13:22 ` Raslan Darawsheh [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=AM0PR05MB67074043DEB2ED3393479D67C2010@AM0PR05MB6707.eurprd05.prod.outlook.com \
--to=rasland@mellanox.com \
--cc=dev@dpdk.org \
--cc=matan@mellanox.com \
--cc=orika@mellanox.com \
--cc=stable@dpdk.org \
--cc=viacheslavo@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).