From: Raslan Darawsheh <rasland@mellanox.com>
To: Dekel Peled <dekelp@mellanox.com>,
Matan Azrad <matan@mellanox.com>,
Slava Ovsiienko <viacheslavo@mellanox.com>
Cc: Ori Kam <orika@mellanox.com>, "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH] net/mlx5: add GTP item support
Date: Mon, 20 Jan 2020 08:25:04 +0000 [thread overview]
Message-ID: <AM0PR05MB67074D66341F24B334D41695C2320@AM0PR05MB6707.eurprd05.prod.outlook.com> (raw)
In-Reply-To: <49eff920c2ff1280ecbec9da80a20e6fb72c6423.1579199284.git.dekelp@mellanox.com>
Hi,
> -----Original Message-----
> From: Dekel Peled <dekelp@mellanox.com>
> Sent: Thursday, January 16, 2020 8:36 PM
> To: Matan Azrad <matan@mellanox.com>; Slava Ovsiienko
> <viacheslavo@mellanox.com>
> Cc: Raslan Darawsheh <rasland@mellanox.com>; Ori Kam
> <orika@mellanox.com>; dev@dpdk.org
> Subject: [PATCH] net/mlx5: add GTP item support
>
> This patch adds to MLX5 PMD support of matching on GTP item, fields
> msg_type and teid, according to RFC [1].
> GTP item validation and translation functions are added and called.
> GTP tunnel type is added to supported tunnels.
>
> [1]
> https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmails.
> dpdk.org%2Farchives%2Fdev%2F2019-
> December%2F152799.html&data=02%7C01%7Crasland%40mellanox.co
> m%7C3c010e7e37ce48e72b9f08d79ab3352b%7Ca652971c7d2e4d9ba6a4d149
> 256f461b%7C0%7C0%7C637147966796528630&sdata=v%2FIYIQZrg9PL8S
> qeP8%2BUcbtXsES1VndUw4EmFY930e4%3D&reserved=0
>
> Signed-off-by: Dekel Peled <dekelp@mellanox.com>
> Acked-by: Ori Kam <orika@mellanox.com>
> ---
> doc/guides/nics/mlx5.rst | 10 +++
> doc/guides/rel_notes/release_20_02.rst | 1 +
> drivers/net/mlx5/mlx5.h | 1 +
> drivers/net/mlx5/mlx5_devx_cmds.c | 3 +
> drivers/net/mlx5/mlx5_flow.c | 4 ++
> drivers/net/mlx5/mlx5_flow.h | 5 +-
> drivers/net/mlx5/mlx5_flow_dv.c | 114
> +++++++++++++++++++++++++++++++++
> drivers/net/mlx5/mlx5_prm.h | 10 ++-
> drivers/net/mlx5/mlx5_rxtx.h | 2 +-
> 9 files changed, 146 insertions(+), 4 deletions(-)
>
> diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst index
> 92228d3..ea749ac 100644
> --- a/doc/guides/nics/mlx5.rst
> +++ b/doc/guides/nics/mlx5.rst
> @@ -90,6 +90,7 @@ Features
> - Statistics query including Basic, Extended and per queue.
> - Rx HW timestamp.
> - Tunnel types: VXLAN, L3 VXLAN, VXLAN-GPE, GRE, MPLSoGRE, MPLSoUDP,
> IP-in-IP, Geneve.
> +- Tunnel types: VXLAN, L3 VXLAN, VXLAN-GPE, GRE, MPLSoGRE,
> MPLSoUDP, IP-in-IP, Geneve, GTP.
> - Tunnel HW offloads: packet type, inner/outer RSS, IP and UDP checksum
> verification.
> - NIC HW offloads: encapsulation (vxlan, gre, mplsoudp, mplsogre), NAT,
> routing, TTL
> increment/decrement, count, drop, mark. For details please see
> :ref:`mlx5_offloads_support`.
> @@ -159,6 +160,11 @@ Limitations
> - VF: flow rules created on VF devices can only match traffic targeted at the
> configured MAC addresses (see ``rte_eth_dev_mac_addr_add()``).
>
> +- Match on GTP tunnel header item supports the following fields only:
> +
> + - msg_type
> + - teid
> +
> .. note::
>
> MAC addresses not already present in the bridge table of the associated
> @@ -788,6 +794,10 @@ Below are some firmware configurations listed.
>
> FLEX_PARSER_PROFILE_ENABLE=0
>
> +- enable GTP flow matching::
> +
> + FLEX_PARSER_PROFILE_ENABLE=3
> +
> Prerequisites
> -------------
>
> diff --git a/doc/guides/rel_notes/release_20_02.rst
> b/doc/guides/rel_notes/release_20_02.rst
> index 8cd3470..81b7f4e 100644
> --- a/doc/guides/rel_notes/release_20_02.rst
> +++ b/doc/guides/rel_notes/release_20_02.rst
> @@ -61,6 +61,7 @@ New Features
> Updated Mellanox mlx5 driver with new features and improvements,
> including:
>
> * Added support for RSS using L3/L4 source/destination only.
> + * Added support for matching on GTP tunnel header item.
>
>
> Removed Items
> diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h index
> c3df825..f2cdac2 100644
> --- a/drivers/net/mlx5/mlx5.h
> +++ b/drivers/net/mlx5/mlx5.h
> @@ -195,6 +195,7 @@ struct mlx5_hca_attr {
> uint32_t vport_inline_mode:3;
> uint32_t tunnel_stateless_geneve_rx:1;
> uint32_t geneve_max_opt_len:1; /* 0x0: 14DW, 0x1: 63DW */
> + uint32_t tunnel_stateless_gtp:1;
> uint32_t lro_cap:1;
> uint32_t tunnel_lro_gre:1;
> uint32_t tunnel_lro_vxlan:1;
> diff --git a/drivers/net/mlx5/mlx5_devx_cmds.c
> b/drivers/net/mlx5/mlx5_devx_cmds.c
> index 9893287..c95b822 100644
> --- a/drivers/net/mlx5/mlx5_devx_cmds.c
> +++ b/drivers/net/mlx5/mlx5_devx_cmds.c
> @@ -415,6 +415,9 @@ struct mlx5_devx_obj *
> hcattr, max_geneve_opt_len);
> attr->wqe_inline_mode =
> MLX5_GET(per_protocol_networking_offload_caps,
> hcattr, wqe_inline_mode);
> + attr->tunnel_stateless_gtp = MLX5_GET
> +
> (per_protocol_networking_offload_caps,
> + hcattr, tunnel_stateless_gtp);
> if (attr->wqe_inline_mode !=
> MLX5_CAP_INLINE_MODE_VPORT_CONTEXT)
> return 0;
> if (attr->eth_virt) {
> diff --git a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c
> index cb9d265..cbfc809 100644
> --- a/drivers/net/mlx5/mlx5_flow.c
> +++ b/drivers/net/mlx5/mlx5_flow.c
> @@ -318,6 +318,10 @@ struct mlx5_flow_tunnel_info {
> .tunnel = MLX5_FLOW_LAYER_IPV6_ENCAP,
> .ptype = RTE_PTYPE_TUNNEL_IP,
> },
> + {
> + .tunnel = MLX5_FLOW_LAYER_GTP,
> + .ptype = RTE_PTYPE_TUNNEL_GTPU,
> + },
> };
>
> /**
> diff --git a/drivers/net/mlx5/mlx5_flow.h b/drivers/net/mlx5/mlx5_flow.h
> index 27d82ac..1ed9422 100644
> --- a/drivers/net/mlx5/mlx5_flow.h
> +++ b/drivers/net/mlx5/mlx5_flow.h
> @@ -122,6 +122,9 @@ enum mlx5_feature_name {
> /* Queue items. */
> #define MLX5_FLOW_ITEM_TX_QUEUE (1u << 27)
>
> +/* Pattern tunnel Layer bits (continued). */ #define
> +MLX5_FLOW_LAYER_GTP (1u << 28)
> +
> /* Outer Masks. */
> #define MLX5_FLOW_LAYER_OUTER_L3 \
> (MLX5_FLOW_LAYER_OUTER_L3_IPV4 |
> MLX5_FLOW_LAYER_OUTER_L3_IPV6) @@ -136,7 +139,7 @@ enum
> mlx5_feature_name {
> (MLX5_FLOW_LAYER_VXLAN | MLX5_FLOW_LAYER_VXLAN_GPE | \
> MLX5_FLOW_LAYER_GRE | MLX5_FLOW_LAYER_NVGRE |
> MLX5_FLOW_LAYER_MPLS | \
> MLX5_FLOW_LAYER_IPIP | MLX5_FLOW_LAYER_IPV6_ENCAP | \
> - MLX5_FLOW_LAYER_GENEVE)
> + MLX5_FLOW_LAYER_GENEVE | MLX5_FLOW_LAYER_GTP)
>
> /* Inner Masks. */
> #define MLX5_FLOW_LAYER_INNER_L3 \
> diff --git a/drivers/net/mlx5/mlx5_flow_dv.c
> b/drivers/net/mlx5/mlx5_flow_dv.c index e8a764c..f0be8ed 100644
> --- a/drivers/net/mlx5/mlx5_flow_dv.c
> +++ b/drivers/net/mlx5/mlx5_flow_dv.c
> @@ -27,6 +27,7 @@
> #include <rte_ip.h>
> #include <rte_gre.h>
> #include <rte_vxlan.h>
> +#include <rte_gtp.h>
>
> #include "mlx5.h"
> #include "mlx5_defs.h"
> @@ -1474,6 +1475,56 @@ struct field_modify_info modify_tcp[] = { }
>
> /**
> + * Validate GTP item.
> + *
> + * @param[in] dev
> + * Pointer to the rte_eth_dev structure.
> + * @param[in] item
> + * Item specification.
> + * @param[in] item_flags
> + * Bit-fields that holds the items detected until now.
> + * @param[out] error
> + * Pointer to error structure.
> + *
> + * @return
> + * 0 on success, a negative errno value otherwise and rte_errno is set.
> + */
> +static int
> +flow_dv_validate_item_gtp(struct rte_eth_dev *dev,
> + const struct rte_flow_item *item,
> + uint64_t item_flags,
> + struct rte_flow_error *error)
> +{
> + struct mlx5_priv *priv = dev->data->dev_private;
> + const struct rte_flow_item_gtp *mask = item->mask;
> + const struct rte_flow_item_gtp nic_mask = {
> + .msg_type = 0xff,
> + .teid = RTE_BE32(0xffffffff),
> + };
> +
> + if (!priv->config.hca_attr.tunnel_stateless_gtp)
> + return rte_flow_error_set(error, ENOTSUP,
> + RTE_FLOW_ERROR_TYPE_ITEM,
> item,
> + "GTP support is not enabled");
> + if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
> + return rte_flow_error_set(error, ENOTSUP,
> + RTE_FLOW_ERROR_TYPE_ITEM,
> item,
> + "multiple tunnel layers not"
> + " supported");
> + if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L4_UDP))
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ITEM,
> item,
> + "no outer UDP layer found");
> + if (!mask)
> + mask = &rte_flow_item_gtp_mask;
> + return mlx5_flow_item_acceptable
> + (item, (const uint8_t *)mask,
> + (const uint8_t *)&nic_mask,
> + sizeof(struct rte_flow_item_gtp),
> + error);
> +}
> +
> +/**
> * Validate the pop VLAN action.
> *
> * @param[in] dev
> @@ -4483,6 +4534,13 @@ struct field_modify_info modify_tcp[] = {
> case MLX5_RTE_FLOW_ITEM_TYPE_TAG:
> case MLX5_RTE_FLOW_ITEM_TYPE_TX_QUEUE:
> break;
> + case RTE_FLOW_ITEM_TYPE_GTP:
> + ret = flow_dv_validate_item_gtp(dev, items,
> item_flags,
> + error);
> + if (ret < 0)
> + return ret;
> + last_item = MLX5_FLOW_LAYER_GTP;
> + break;
> default:
> return rte_flow_error_set(error, ENOTSUP,
>
> RTE_FLOW_ERROR_TYPE_ITEM,
> @@ -6165,6 +6223,57 @@ struct field_modify_info modify_tcp[] = {
> icmp_v->hdr.icmp_code & icmp_m->hdr.icmp_code); }
>
> +/**
> + * Add GTP item to matcher and to the value.
> + *
> + * @param[in, out] matcher
> + * Flow matcher.
> + * @param[in, out] key
> + * Flow matcher value.
> + * @param[in] item
> + * Flow pattern to translate.
> + * @param[in] inner
> + * Item is inner pattern.
> + */
> +static void
> +flow_dv_translate_item_gtp(void *matcher, void *key,
> + const struct rte_flow_item *item, int inner) {
> + const struct rte_flow_item_gtp *gtp_m = item->mask;
> + const struct rte_flow_item_gtp *gtp_v = item->spec;
> + void *headers_m;
> + void *headers_v;
> + void *misc3_m = MLX5_ADDR_OF(fte_match_param, matcher,
> + misc_parameters_3);
> + void *misc3_v = MLX5_ADDR_OF(fte_match_param, key,
> misc_parameters_3);
> + uint16_t dport = RTE_GTPU_UDP_PORT;
> +
> + if (inner) {
> + headers_m = MLX5_ADDR_OF(fte_match_param, matcher,
> + inner_headers);
> + headers_v = MLX5_ADDR_OF(fte_match_param, key,
> inner_headers);
> + } else {
> + headers_m = MLX5_ADDR_OF(fte_match_param, matcher,
> + outer_headers);
> + headers_v = MLX5_ADDR_OF(fte_match_param, key,
> outer_headers);
> + }
> + if (!MLX5_GET16(fte_match_set_lyr_2_4, headers_v, udp_dport)) {
> + MLX5_SET(fte_match_set_lyr_2_4, headers_m, udp_dport,
> 0xFFFF);
> + MLX5_SET(fte_match_set_lyr_2_4, headers_v, udp_dport,
> dport);
> + }
> + if (!gtp_v)
> + return;
> + if (!gtp_m)
> + gtp_m = &rte_flow_item_gtp_mask;
> + MLX5_SET(fte_match_set_misc3, misc3_m, gtpu_msg_type, gtp_m-
> >msg_type);
> + MLX5_SET(fte_match_set_misc3, misc3_v, gtpu_msg_type,
> + gtp_v->msg_type & gtp_m->msg_type);
> + MLX5_SET(fte_match_set_misc3, misc3_m, gtpu_teid,
> + rte_be_to_cpu_32(gtp_m->teid));
> + MLX5_SET(fte_match_set_misc3, misc3_v, gtpu_teid,
> + rte_be_to_cpu_32(gtp_v->teid & gtp_m->teid)); }
> +
> static uint32_t matcher_zero[MLX5_ST_SZ_DW(fte_match_param)] = { 0 };
>
> #define HEADER_IS_ZERO(match_criteria, headers)
> \
> @@ -7331,6 +7440,11 @@ struct field_modify_info modify_tcp[] = {
> items);
> last_item = MLX5_FLOW_ITEM_TX_QUEUE;
> break;
> + case RTE_FLOW_ITEM_TYPE_GTP:
> + flow_dv_translate_item_gtp(match_mask,
> match_value,
> + items, tunnel);
> + last_item = MLX5_FLOW_LAYER_GTP;
> + break;
> default:
> break;
> }
> diff --git a/drivers/net/mlx5/mlx5_prm.h b/drivers/net/mlx5/mlx5_prm.h
> index a805363..6ad214b 100644
> --- a/drivers/net/mlx5/mlx5_prm.h
> +++ b/drivers/net/mlx5/mlx5_prm.h
> @@ -682,7 +682,11 @@ struct mlx5_ifc_fte_match_set_misc3_bits {
> u8 icmp_code[0x8];
> u8 icmpv6_type[0x8];
> u8 icmpv6_code[0x8];
> - u8 reserved_at_1a0[0xe0];
> + u8 reserved_at_120[0x20];
> + u8 gtpu_teid[0x20];
> + u8 gtpu_msg_type[0x08];
> + u8 gtpu_msg_flags[0x08];
> + u8 reserved_at_170[0x90];
> };
>
> /* Flow matcher. */
> @@ -1235,7 +1239,9 @@ struct
> mlx5_ifc_per_protocol_networking_offload_caps_bits {
> u8 swp[0x1];
> u8 swp_csum[0x1];
> u8 swp_lso[0x1];
> - u8 reserved_at_23[0xd];
> + u8 reserved_at_23[0x8];
> + u8 tunnel_stateless_gtp[0x1];
> + u8 reserved_at_25[0x4];
> u8 max_vxlan_udp_ports[0x8];
> u8 reserved_at_38[0x6];
> u8 max_geneve_opt_len[0x1];
> diff --git a/drivers/net/mlx5/mlx5_rxtx.h b/drivers/net/mlx5/mlx5_rxtx.h
> index e362b4a..b6a33c5 100644
> --- a/drivers/net/mlx5/mlx5_rxtx.h
> +++ b/drivers/net/mlx5/mlx5_rxtx.h
> @@ -40,7 +40,7 @@
> #include "mlx5_glue.h"
>
> /* Support tunnel matching. */
> -#define MLX5_FLOW_TUNNEL 9
> +#define MLX5_FLOW_TUNNEL 10
>
> struct mlx5_rxq_stats {
> #ifdef MLX5_PMD_SOFT_COUNTERS
> --
> 1.8.3.1
Patch applied to next-net-mlx,
Kindest regards,
Raslan Darawsheh
prev parent reply other threads:[~2020-01-20 8:25 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-16 18:36 Dekel Peled
2020-01-20 8:25 ` Raslan Darawsheh [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=AM0PR05MB67074D66341F24B334D41695C2320@AM0PR05MB6707.eurprd05.prod.outlook.com \
--to=rasland@mellanox.com \
--cc=dekelp@mellanox.com \
--cc=dev@dpdk.org \
--cc=matan@mellanox.com \
--cc=orika@mellanox.com \
--cc=viacheslavo@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).