From: Raslan Darawsheh <rasland@mellanox.com>
To: Raslan Darawsheh <rasland@mellanox.com>, "dev@dpdk.org" <dev@dpdk.org>
Cc: Matan Azrad <matan@mellanox.com>
Subject: Re: [dpdk-dev] [PATCH v2] net/mlx5: add BlueField-2 device ID
Date: Tue, 18 Feb 2020 13:26:53 +0000 [thread overview]
Message-ID: <AM0PR05MB6707517EFC55885B9FAA95E6C2110@AM0PR05MB6707.eurprd05.prod.outlook.com> (raw)
In-Reply-To: <1582032192-1951-1-git-send-email-rasland@mellanox.com>
Removed V1 from next-net-mlx, and applied new version to next-net-mlx,
Kindest regards,
Raslan Darawsheh
> -----Original Message-----
> From: dev <dev-bounces@dpdk.org> On Behalf Of Raslan Darawsheh
> Sent: Tuesday, February 18, 2020 3:23 PM
> To: dev@dpdk.org
> Subject: [dpdk-dev] [PATCH v2] net/mlx5: add BlueField-2 device ID
>
> This adds new device id to the list of Mellanox devices
> that runs mlx5 PMD.
> - BlueField-2 integrated ConnectX-6 Dx network controller
>
> This device is not ready yet, it is in development stage.
>
> Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
> Reviewed-by: Gavin Hu <gavin.hu@arm.com>
> Acked-by: Matan Azrad <matan@mellanox.com>
> ---
> v2: added missing support for VDPA driver
> ---
>
> doc/guides/rel_notes/release_20_02.rst | 1 +
> drivers/common/mlx5/mlx5_common.h | 1 +
> drivers/net/mlx5/mlx5.c | 4 ++++
> drivers/vdpa/mlx5/mlx5_vdpa.c | 4 ++++
> 4 files changed, 10 insertions(+)
>
> diff --git a/doc/guides/rel_notes/release_20_02.rst
> b/doc/guides/rel_notes/release_20_02.rst
> index 78dab7c..0b42890 100644
> --- a/doc/guides/rel_notes/release_20_02.rst
> +++ b/doc/guides/rel_notes/release_20_02.rst
> @@ -133,6 +133,7 @@ New Features
> * Added support for RSS using L3/L4 source/destination only.
> * Added support for matching on GTP tunnel header item.
> * Removed limitation of matching on tagged/untagged packets (when using
> DV flow engine).
> + * Added BlueField-2 integrated ConnectX-6 Dx device support.
>
> * **Add new vDPA PMD based on Mellanox devices**
>
> diff --git a/drivers/common/mlx5/mlx5_common.h
> b/drivers/common/mlx5/mlx5_common.h
> index bc200e2..961c606 100644
> --- a/drivers/common/mlx5/mlx5_common.h
> +++ b/drivers/common/mlx5/mlx5_common.h
> @@ -137,6 +137,7 @@ enum {
> PCI_DEVICE_ID_MELLANOX_CONNECTX6VF = 0x101c,
> PCI_DEVICE_ID_MELLANOX_CONNECTX6DX = 0x101d,
> PCI_DEVICE_ID_MELLANOX_CONNECTX6DXVF = 0x101e,
> + PCI_DEVICE_ID_MELLANOX_CONNECTX6DXBF = 0xa2d6,
> };
>
> /* Maximum number of simultaneous unicast MAC addresses. */
> diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
> index 23a50f3..4803760 100644
> --- a/drivers/net/mlx5/mlx5.c
> +++ b/drivers/net/mlx5/mlx5.c
> @@ -3530,6 +3530,10 @@ static const struct rte_pci_id mlx5_pci_id_map[] =
> {
>
> PCI_DEVICE_ID_MELLANOX_CONNECTX6DXVF)
> },
> {
> + RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
> +
> PCI_DEVICE_ID_MELLANOX_CONNECTX6DXBF)
> + },
> + {
> .vendor_id = 0
> }
> };
> diff --git a/drivers/vdpa/mlx5/mlx5_vdpa.c
> b/drivers/vdpa/mlx5/mlx5_vdpa.c
> index 36344ca..97d914a 100644
> --- a/drivers/vdpa/mlx5/mlx5_vdpa.c
> +++ b/drivers/vdpa/mlx5/mlx5_vdpa.c
> @@ -531,6 +531,10 @@ static const struct rte_pci_id
> mlx5_vdpa_pci_id_map[] = {
>
> PCI_DEVICE_ID_MELLANOX_CONNECTX6DXVF)
> },
> {
> + RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
> +
> PCI_DEVICE_ID_MELLANOX_CONNECTX6DXBF)
> + },
> + {
> .vendor_id = 0
> }
> };
> --
> 2.7.4
prev parent reply other threads:[~2020-02-18 13:26 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-13 16:11 [dpdk-dev] [PATCH] " Raslan Darawsheh
2020-02-16 15:02 ` Gavin Hu
2020-02-18 12:01 ` Raslan Darawsheh
2020-02-18 13:11 ` Matan Azrad
2020-02-18 13:22 ` Raslan Darawsheh
2020-02-18 13:23 ` [dpdk-dev] [PATCH v2] " Raslan Darawsheh
2020-02-18 13:26 ` Raslan Darawsheh [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=AM0PR05MB6707517EFC55885B9FAA95E6C2110@AM0PR05MB6707.eurprd05.prod.outlook.com \
--to=rasland@mellanox.com \
--cc=dev@dpdk.org \
--cc=matan@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).