DPDK patches and discussions
 help / color / mirror / Atom feed
From: Raslan Darawsheh <rasland@mellanox.com>
To: Dekel Peled <dekelp@mellanox.com>,
	Matan Azrad <matan@mellanox.com>,
	Slava Ovsiienko <viacheslavo@mellanox.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH] net/mlx5: support match on GTP flags
Date: Mon, 11 May 2020 14:25:25 +0000	[thread overview]
Message-ID: <AM0PR05MB6707D5F6B19F1688D0AFC71DC2A10@AM0PR05MB6707.eurprd05.prod.outlook.com> (raw)
In-Reply-To: <172bff51c15e003369174831b3777575e358097a.1588785170.git.dekelp@mellanox.com>

Hi,

> -----Original Message-----
> From: Dekel Peled <dekelp@mellanox.com>
> Sent: Wednesday, May 6, 2020 8:14 PM
> To: Matan Azrad <matan@mellanox.com>; Slava Ovsiienko
> <viacheslavo@mellanox.com>; Raslan Darawsheh <rasland@mellanox.com>
> Cc: dev@dpdk.org
> Subject: [PATCH] net/mlx5: support match on GTP flags
> 
> This patch adds to MLX5 PMD the support of matching on
> GTP header item v_pt_rsv_flags.
> 
> This item is contained in 1 byte of the format:
> -------------------------------------------
> | bit   | 0 - 2   | 3  | 4   | 5 | 6 | 7  |
> |-----------------------------------------|
> | value | Version | PT | Res | E | S | PN |
> -------------------------------------------
> 
> Matching is supported only for GTP flags E, S, PN.
> Therefore values 0 to 7 are supported.
> 
> Mask must be set accordingly:
> ... gtp v_pt_rsv_flags is 1 v_pt_rsv_flags mask 0x07 ...
> 
> Signed-off-by: Dekel Peled <dekelp@mellanox.com>
> Acked-by: Matan Azrad <matan@mellanox.com>
> ---
>  doc/guides/nics/mlx5.rst               |  1 +
>  doc/guides/rel_notes/release_20_05.rst |  1 +
>  drivers/net/mlx5/mlx5_flow_dv.c        | 23 +++++++++++++++++++++++
>  3 files changed, 25 insertions(+)
> 
> diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
> index c4bc77c..f561683 100644
> --- a/doc/guides/nics/mlx5.rst
> +++ b/doc/guides/nics/mlx5.rst
> @@ -162,6 +162,7 @@ Limitations
> 
>  - Match on GTP tunnel header item supports the following fields only:
> 
> +     - v_pt_rsv_flags: E flag, S flag, PN flag
>       - msg_type
>       - teid
> 
> diff --git a/doc/guides/rel_notes/release_20_05.rst
> b/doc/guides/rel_notes/release_20_05.rst
> index 2f60e67..8bab5a3 100644
> --- a/doc/guides/rel_notes/release_20_05.rst
> +++ b/doc/guides/rel_notes/release_20_05.rst
> @@ -144,6 +144,7 @@ New Features
>    * Removed flow rules caching for memory saving and compliance with
> ethdev API.
>    * Optimized the memory consumption of flow.
>    * Added support for flow aging based on hardware counter.
> +  * Updated support for matching on GTP header, added match on GTP
> flags.
> 
>  * **Updated the AESNI MB crypto PMD.**
> 
> diff --git a/drivers/net/mlx5/mlx5_flow_dv.c
> b/drivers/net/mlx5/mlx5_flow_dv.c
> index aa5c353..e5e656f 100644
> --- a/drivers/net/mlx5/mlx5_flow_dv.c
> +++ b/drivers/net/mlx5/mlx5_flow_dv.c
> @@ -1639,6 +1639,18 @@ struct field_modify_info modify_tcp[] = {
>  	return 0;
>  }
> 
> +/*
> + * GTP flags are contained in 1 byte of the format:
> + * -------------------------------------------
> + * | bit   | 0 - 2   | 3  | 4   | 5 | 6 | 7  |
> + * |-----------------------------------------|
> + * | value | Version | PT | Res | E | S | PN |
> + * -------------------------------------------
> + *
> + * Matching is supported only for GTP flags E, S, PN.
> + */
> +#define MLX5_GTP_FLAGS_MASK	0x07
> +
>  /**
>   * Validate GTP item.
>   *
> @@ -1661,8 +1673,10 @@ struct field_modify_info modify_tcp[] = {
>  			  struct rte_flow_error *error)
>  {
>  	struct mlx5_priv *priv = dev->data->dev_private;
> +	const struct rte_flow_item_gtp *spec = item->spec;
>  	const struct rte_flow_item_gtp *mask = item->mask;
>  	const struct rte_flow_item_gtp nic_mask = {
> +		.v_pt_rsv_flags = MLX5_GTP_FLAGS_MASK,
>  		.msg_type = 0xff,
>  		.teid = RTE_BE32(0xffffffff),
>  	};
> @@ -1682,6 +1696,11 @@ struct field_modify_info modify_tcp[] = {
>  					  "no outer UDP layer found");
>  	if (!mask)
>  		mask = &rte_flow_item_gtp_mask;
> +	if (spec && spec->v_pt_rsv_flags & ~MLX5_GTP_FLAGS_MASK)
> +		return rte_flow_error_set(error, ENOTSUP,
> +					  RTE_FLOW_ERROR_TYPE_ITEM,
> item,
> +					  "Match is supported for GTP"
> +					  " flags only");
>  	return mlx5_flow_item_acceptable
>  		(item, (const uint8_t *)mask,
>  		 (const uint8_t *)&nic_mask,
> @@ -7047,6 +7066,10 @@ struct field_modify_info modify_tcp[] = {
>  		return;
>  	if (!gtp_m)
>  		gtp_m = &rte_flow_item_gtp_mask;
> +	MLX5_SET(fte_match_set_misc3, misc3_m, gtpu_msg_flags,
> +		 gtp_m->v_pt_rsv_flags);
> +	MLX5_SET(fte_match_set_misc3, misc3_v, gtpu_msg_flags,
> +		 gtp_v->v_pt_rsv_flags & gtp_m->v_pt_rsv_flags);
>  	MLX5_SET(fte_match_set_misc3, misc3_m, gtpu_msg_type, gtp_m-
> >msg_type);
>  	MLX5_SET(fte_match_set_misc3, misc3_v, gtpu_msg_type,
>  		 gtp_v->msg_type & gtp_m->msg_type);
> --
> 1.8.3.1


Patch applied to next-net-mlx,

Kindest regards,
Raslan Darawsheh

      reply	other threads:[~2020-05-11 14:25 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-06 17:13 Dekel Peled
2020-05-11 14:25 ` Raslan Darawsheh [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=AM0PR05MB6707D5F6B19F1688D0AFC71DC2A10@AM0PR05MB6707.eurprd05.prod.outlook.com \
    --to=rasland@mellanox.com \
    --cc=dekelp@mellanox.com \
    --cc=dev@dpdk.org \
    --cc=matan@mellanox.com \
    --cc=viacheslavo@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).