From: Slava Ovsiienko <viacheslavo@mellanox.com>
To: Wentao Cui <wentaoc@mellanox.com>,
Matan Azrad <matan@mellanox.com>,
Shahaf Shuler <shahafs@mellanox.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH] net/mlx5: optimize memory of mlx5 flow meter
Date: Tue, 21 Apr 2020 07:40:51 +0000 [thread overview]
Message-ID: <AM4PR05MB3265429A59638B32D614600ED2D50@AM4PR05MB3265.eurprd05.prod.outlook.com> (raw)
In-Reply-To: <20200420024002.20601-1-wentaoc@mellanox.com>
> -----Original Message-----
> From: Wentao Cui <wentaoc@mellanox.com>
> Sent: Monday, April 20, 2020 5:40
> To: Matan Azrad <matan@mellanox.com>; Shahaf Shuler
> <shahafs@mellanox.com>; Slava Ovsiienko <viacheslavo@mellanox.com>
> Cc: dev@dpdk.org
> Subject: [PATCH] net/mlx5: optimize memory of mlx5 flow meter
>
> This commit focus on flow meter data structures
> optimization: mlx5_flow_meter.
>
> Optimize memory consumption of flow meter data structure.
> Reorganize flow meter data structure,delete unnecessary data fields.
>
> Signed-off-by: Wentao Cui <wentaoc@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
> ---
> drivers/net/mlx5/mlx5_flow.h | 37 ++++++++++++++++++++++++++----
> drivers/net/mlx5/mlx5_flow_dv.c | 8 +++----
> drivers/net/mlx5/mlx5_flow_meter.c | 26 ++++++++++++---------
> 3 files changed, 52 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/net/mlx5/mlx5_flow.h b/drivers/net/mlx5/mlx5_flow.h
> index d697eba0e9..74017cfa31 100644
> --- a/drivers/net/mlx5/mlx5_flow.h
> +++ b/drivers/net/mlx5/mlx5_flow.h
> @@ -709,12 +709,41 @@ struct mlx5_flow_meter {
> uint32_t idx; /* Index to meter object. */
> uint32_t meter_id;
> /**< Meter id. */
> - struct rte_mtr_params params;
> - /**< Meter rule parameters. */
> struct mlx5_flow_meter_profile *profile;
> /**< Meter profile parameters. */
> - struct rte_flow_attr attr;
> - /**< Flow attributes. */
> +
> + /** Policer actions (per meter output color). */
> + enum rte_mtr_policer_action action[RTE_COLORS];
> +
> + /** Set of stats counters to be enabled.
> + * @see enum rte_mtr_stats_type
> + */
> + uint64_t stats_mask;
> +
> + /**< Rule applies to ingress traffic. */
> + uint32_t ingress:1;
> +
> + /**< Rule applies to egress traffic. */
> + uint32_t egress:1;
> + /**
> + * Instead of simply matching the properties of traffic as it would
> + * appear on a given DPDK port ID, enabling this attribute transfers
> + * a flow rule to the lowest possible level of any device endpoints
> + * found in the pattern.
> + *
> + * When supported, this effectively enables an application to
> + * re-route traffic not necessarily intended for it (e.g. coming
> + * from or addressed to different physical ports, VFs or
> + * applications) at the device level.
> + *
> + * It complements the behavior of some pattern items such as
> + * RTE_FLOW_ITEM_TYPE_PHY_PORT and is meaningless without
> them.
> + *
> + * When transferring flow rules, ingress and egress attributes keep
> + * their original meaning, as if processing traffic emitted or
> + * received by the application.
> + */
> + uint32_t transfer:1;
> struct mlx5_meter_domains_infos *mfts;
> /**< Flow table created for this meter. */
> struct mlx5_flow_policer_stats policer_stats; diff --git
> a/drivers/net/mlx5/mlx5_flow_dv.c b/drivers/net/mlx5/mlx5_flow_dv.c
> index cfc911c9ca..b552b0ea7c 100644
> --- a/drivers/net/mlx5/mlx5_flow_dv.c
> +++ b/drivers/net/mlx5/mlx5_flow_dv.c
> @@ -3707,9 +3707,9 @@ mlx5_flow_validate_action_meter(struct
> rte_eth_dev *dev,
> return rte_flow_error_set(error, EINVAL,
> RTE_FLOW_ERROR_TYPE_ACTION,
> NULL,
> "Meter not found");
> - if (fm->ref_cnt && (!(fm->attr.transfer == attr->transfer ||
> - (!fm->attr.ingress && !attr->ingress && attr->egress) ||
> - (!fm->attr.egress && !attr->egress && attr->ingress))))
> + if (fm->ref_cnt && (!(fm->transfer == attr->transfer ||
> + (!fm->ingress && !attr->ingress && attr->egress) ||
> + (!fm->egress && !attr->egress && attr->ingress))))
> return rte_flow_error_set(error, EINVAL,
> RTE_FLOW_ERROR_TYPE_ACTION,
> NULL,
> "Flow attributes are either invalid "
> @@ -9008,7 +9008,7 @@ flow_dv_create_policer_forward_rule(struct
> mlx5_flow_meter *fm,
> rte_col_2_mlx5_col(i), UINT8_MAX);
> if (mtb->count_actns[i])
> actions[j++] = mtb->count_actns[i];
> - if (fm->params.action[i] == MTR_POLICER_ACTION_DROP)
> + if (fm->action[i] == MTR_POLICER_ACTION_DROP)
> actions[j++] = mtb->drop_actn;
> else
> actions[j++] = dtb->jump_actn;
> diff --git a/drivers/net/mlx5/mlx5_flow_meter.c
> b/drivers/net/mlx5/mlx5_flow_meter.c
> index b5fbf5d316..08f7dc8d11 100644
> --- a/drivers/net/mlx5/mlx5_flow_meter.c
> +++ b/drivers/net/mlx5/mlx5_flow_meter.c
> @@ -55,8 +55,8 @@ mlx5_flow_meter_action_create(struct mlx5_priv
> *priv,
> MLX5_SET(flow_meter_parameters,
> attr, ebs_mantissa, srtcm->ebs_mantissa);
> mtr_init.next_table =
> - fm->attr.transfer ? fm->mfts->transfer.tbl->obj :
> - fm->attr.egress ? fm->mfts->egress.tbl->obj :
> + fm->transfer ? fm->mfts->transfer.tbl->obj :
> + fm->egress ? fm->mfts->egress.tbl->obj :
> fm->mfts->ingress.tbl->obj;
> mtr_init.reg_c_index = priv->mtr_color_reg - REG_C_0;
> mtr_init.flow_meter_parameter = fm->mfts->fmp; @@ -657,7
> +657,9 @@ mlx5_flow_meter_create(struct rte_eth_dev *dev, uint32_t
> meter_id,
> /* Fill the flow meter parameters. */
> fm->meter_id = meter_id;
> fm->profile = fmp;
> - fm->params = *params;
> + memcpy(fm->action, params->action, sizeof(params->action));
> + fm->stats_mask = params->stats_mask;
> +
> /* Alloc policer counters. */
> for (i = 0; i < RTE_DIM(fm->policer_stats.cnt); i++) {
> fm->policer_stats.cnt[i] = mlx5_counter_alloc(dev); @@ -
> 1050,7 +1052,7 @@ mlx5_flow_meter_stats_read(struct rte_eth_dev *dev,
> &bytes);
> if (ret)
> goto error;
> - if (fm->params.action[i] ==
> MTR_POLICER_ACTION_DROP) {
> + if (fm->action[i] == MTR_POLICER_ACTION_DROP) {
> pkts_dropped += pkts;
> bytes_dropped += bytes;
> }
> @@ -1181,7 +1183,9 @@ mlx5_flow_meter_attach(struct mlx5_priv *priv,
> uint32_t meter_id,
> }
> if (!fm->ref_cnt++) {
> MLX5_ASSERT(!fm->mfts->meter_action);
> - fm->attr = *attr;
> + fm->ingress = attr->ingress;
> + fm->egress = attr->egress;
> + fm->transfer = attr->transfer;
> /* This also creates the meter object. */
> fm->mfts->meter_action =
> mlx5_flow_meter_action_create(priv,
> fm);
> @@ -1189,9 +1193,9 @@ mlx5_flow_meter_attach(struct mlx5_priv *priv,
> uint32_t meter_id,
> goto error_detach;
> } else {
> MLX5_ASSERT(fm->mfts->meter_action);
> - if (attr->transfer != fm->attr.transfer ||
> - attr->ingress != fm->attr.ingress ||
> - attr->egress != fm->attr.egress) {
> + if (attr->transfer != fm->transfer ||
> + attr->ingress != fm->ingress ||
> + attr->egress != fm->egress) {
> DRV_LOG(ERR, "meter I/O attributes do not "
> "match flow I/O attributes.");
> goto error_detach;
> @@ -1216,15 +1220,15 @@ mlx5_flow_meter_attach(struct mlx5_priv
> *priv, uint32_t meter_id, void mlx5_flow_meter_detach(struct
> mlx5_flow_meter *fm) {
> - const struct rte_flow_attr attr = { 0 };
> -
> MLX5_ASSERT(fm->ref_cnt);
> if (--fm->ref_cnt)
> return;
> if (fm->mfts->meter_action)
> mlx5_glue->destroy_flow_action(fm->mfts->meter_action);
> fm->mfts->meter_action = NULL;
> - fm->attr = attr;
> + fm->ingress = 0;
> + fm->egress = 0;
> + fm->transfer = 0;
> }
>
> /**
> --
> 2.21.0
next prev parent reply other threads:[~2020-04-21 7:40 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <0001-net-mlx5-optimize-memory-of-mlx5-flow-meter.patch>
2020-04-20 2:40 ` Wentao Cui
2020-04-21 7:40 ` Slava Ovsiienko [this message]
2020-04-21 12:06 ` Raslan Darawsheh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=AM4PR05MB3265429A59638B32D614600ED2D50@AM4PR05MB3265.eurprd05.prod.outlook.com \
--to=viacheslavo@mellanox.com \
--cc=dev@dpdk.org \
--cc=matan@mellanox.com \
--cc=shahafs@mellanox.com \
--cc=wentaoc@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).