From: Slava Ovsiienko <viacheslavo@mellanox.com>
To: Vu Pham <vuhuong@mellanox.com>, "dev@dpdk.org" <dev@dpdk.org>
Cc: Ori Kam <orika@mellanox.com>, Matan Azrad <matan@mellanox.com>,
Raslan Darawsheh <rasland@mellanox.com>,
Vu Pham <vuhuong@mellanox.com>
Subject: Re: [dpdk-dev] [PATCH v4 1/2] common/mlx5: refactor multi-process IPC handling codes to common driver
Date: Tue, 14 Apr 2020 07:26:41 +0000 [thread overview]
Message-ID: <AM4PR05MB3265B6C2E59A76EAFD09CDC5D2DA0@AM4PR05MB3265.eurprd05.prod.outlook.com> (raw)
In-Reply-To: <20200413211748.20500-2-vuhuong@mellanox.com>
> -----Original Message-----
> From: Vu Pham <vuhuong@mellanox.com>
> Sent: Tuesday, April 14, 2020 0:18
> To: dev@dpdk.org
> Cc: Slava Ovsiienko <viacheslavo@mellanox.com>; Ori Kam
> <orika@mellanox.com>; Matan Azrad <matan@mellanox.com>; Raslan
> Darawsheh <rasland@mellanox.com>; Vu Pham <vuhuong@mellanox.com>
> Subject: [PATCH v4 1/2] common/mlx5: refactor multi-process IPC handling
> codes to common driver
>
> Refactor common multi-process handling codes from net PMD to common
> driver. Using tuple mp_id{name, port_id} as standard input parameter for all
> multi-process IPC APIs instead of using rte_eth_dev.
>
> Modify net PMD to use multi-process APIs from common driver.
>
> Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
> ---
> drivers/common/mlx5/Makefile | 3 +-
> drivers/common/mlx5/meson.build | 1 +
> drivers/common/mlx5/mlx5_common_mp.c | 188
> +++++++++++++++++++
> drivers/common/mlx5/mlx5_common_mp.h | 98 ++++++++++
> drivers/common/mlx5/rte_common_mlx5_version.map | 13 ++
> drivers/net/mlx5/mlx5.c | 15 +-
> drivers/net/mlx5/mlx5.h | 43 +----
> drivers/net/mlx5/mlx5_mp.c | 234 ++----------------------
> drivers/net/mlx5/mlx5_mr.c | 2 +-
> drivers/net/mlx5/mlx5_rxtx.c | 3 +-
> 10 files changed, 336 insertions(+), 264 deletions(-) create mode 100644
> drivers/common/mlx5/mlx5_common_mp.c
> create mode 100644 drivers/common/mlx5/mlx5_common_mp.h
>
> diff --git a/drivers/common/mlx5/Makefile b/drivers/common/mlx5/Makefile
> index f32933d592..2a88492731 100644
> --- a/drivers/common/mlx5/Makefile
> +++ b/drivers/common/mlx5/Makefile
> @@ -17,6 +17,7 @@ endif
> SRCS-y += mlx5_devx_cmds.c
> SRCS-y += mlx5_common.c
> SRCS-y += mlx5_nl.c
> +SRCS-y += mlx5_common_mp.c
> ifeq ($(CONFIG_RTE_IBVERBS_LINK_DLOPEN),y)
> INSTALL-y-lib += $(LIB_GLUE)
> endif
> @@ -46,7 +47,7 @@ endif
> LDLIBS += -lrte_eal -lrte_pci -lrte_kvargs -lrte_net
>
> # A few warnings cannot be avoided in external headers.
> -CFLAGS += -Wno-error=cast-qual -UPEDANTIC
> +CFLAGS += -Wno-error=cast-qual -UPEDANTIC -DALLOW_EXPERIMENTAL_API
>
> EXPORT_MAP := rte_common_mlx5_version.map
>
> diff --git a/drivers/common/mlx5/meson.build
> b/drivers/common/mlx5/meson.build index f671710714..83671861c9 100644
> --- a/drivers/common/mlx5/meson.build
> +++ b/drivers/common/mlx5/meson.build
> @@ -55,6 +55,7 @@ sources = files(
> 'mlx5_devx_cmds.c',
> 'mlx5_common.c',
> 'mlx5_nl.c',
> + 'mlx5_common_mp.c',
> )
> if not dlopen_ibverbs
> sources += files('mlx5_glue.c')
> diff --git a/drivers/common/mlx5/mlx5_common_mp.c
> b/drivers/common/mlx5/mlx5_common_mp.c
> new file mode 100644
> index 0000000000..da55143bc1
> --- /dev/null
> +++ b/drivers/common/mlx5/mlx5_common_mp.c
> @@ -0,0 +1,188 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + * Copyright 2019 6WIND S.A.
> + * Copyright 2019 Mellanox Technologies, Ltd */
> +
> +#include <stdio.h>
> +#include <time.h>
> +
> +#include <rte_eal.h>
> +#include <rte_errno.h>
> +
> +#include "mlx5_common_mp.h"
> +#include "mlx5_common_utils.h"
> +
> +/**
> + * Request Memory Region creation to the primary process.
> + *
> + * @param[in] mp_id
> + * ID of the MP process.
> + * @param addr
> + * Target virtual address to register.
> + *
> + * @return
> + * 0 on success, a negative errno value otherwise and rte_errno is set.
> + */
> +int
> +mlx5_mp_req_mr_create(struct mlx5_mp_id *mp_id, uintptr_t addr) {
> + struct rte_mp_msg mp_req;
> + struct rte_mp_msg *mp_res;
> + struct rte_mp_reply mp_rep;
> + struct mlx5_mp_param *req = (struct mlx5_mp_param
> *)mp_req.param;
> + struct mlx5_mp_param *res;
> + struct timespec ts = {.tv_sec = MLX5_MP_REQ_TIMEOUT_SEC, .tv_nsec
> = 0};
> + int ret;
> +
> + MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_SECONDARY);
> + mp_init_msg(mp_id, &mp_req, MLX5_MP_REQ_CREATE_MR);
> + req->args.addr = addr;
> + ret = rte_mp_request_sync(&mp_req, &mp_rep, &ts);
> + if (ret) {
> + DRV_LOG(ERR, "port %u request to primary process failed",
> + mp_id->port_id);
> + return -rte_errno;
> + }
> + MLX5_ASSERT(mp_rep.nb_received == 1);
> + mp_res = &mp_rep.msgs[0];
> + res = (struct mlx5_mp_param *)mp_res->param;
> + ret = res->result;
> + if (ret)
> + rte_errno = -ret;
> + free(mp_rep.msgs);
> + return ret;
> +}
> +
> +/**
> + * Request Verbs queue state modification to the primary process.
> + *
> + * @param[in] mp_id
> + * ID of the MP process.
> + * @param sm
> + * State modify parameters.
> + *
> + * @return
> + * 0 on success, a negative errno value otherwise and rte_errno is set.
> + */
> +int
> +mlx5_mp_req_queue_state_modify(struct mlx5_mp_id *mp_id,
> + struct mlx5_mp_arg_queue_state_modify *sm) {
> + struct rte_mp_msg mp_req;
> + struct rte_mp_msg *mp_res;
> + struct rte_mp_reply mp_rep;
> + struct mlx5_mp_param *req = (struct mlx5_mp_param
> *)mp_req.param;
> + struct mlx5_mp_param *res;
> + struct timespec ts = {.tv_sec = MLX5_MP_REQ_TIMEOUT_SEC, .tv_nsec
> = 0};
> + int ret;
> +
> + MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_SECONDARY);
> + mp_init_msg(mp_id, &mp_req,
> MLX5_MP_REQ_QUEUE_STATE_MODIFY);
> + req->args.state_modify = *sm;
> + ret = rte_mp_request_sync(&mp_req, &mp_rep, &ts);
> + if (ret) {
> + DRV_LOG(ERR, "port %u request to primary process failed",
> + mp_id->port_id);
> + return -rte_errno;
> + }
> + MLX5_ASSERT(mp_rep.nb_received == 1);
> + mp_res = &mp_rep.msgs[0];
> + res = (struct mlx5_mp_param *)mp_res->param;
> + ret = res->result;
> + free(mp_rep.msgs);
> + return ret;
> +}
> +
> +/**
> + * Request Verbs command file descriptor for mmap to the primary process.
> + *
> + * @param[in] mp_id
> + * ID of the MP process.
> + *
> + * @return
> + * fd on success, a negative errno value otherwise and rte_errno is set.
> + */
> +int
> +mlx5_mp_req_verbs_cmd_fd(struct mlx5_mp_id *mp_id) {
> + struct rte_mp_msg mp_req;
> + struct rte_mp_msg *mp_res;
> + struct rte_mp_reply mp_rep;
> + struct mlx5_mp_param *res;
> + struct timespec ts = {.tv_sec = MLX5_MP_REQ_TIMEOUT_SEC, .tv_nsec
> = 0};
> + int ret;
> +
> + MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_SECONDARY);
> + mp_init_msg(mp_id, &mp_req, MLX5_MP_REQ_VERBS_CMD_FD);
> + ret = rte_mp_request_sync(&mp_req, &mp_rep, &ts);
> + if (ret) {
> + DRV_LOG(ERR, "port %u request to primary process failed",
> + mp_id->port_id);
> + return -rte_errno;
> + }
> + MLX5_ASSERT(mp_rep.nb_received == 1);
> + mp_res = &mp_rep.msgs[0];
> + res = (struct mlx5_mp_param *)mp_res->param;
> + if (res->result) {
> + rte_errno = -res->result;
> + DRV_LOG(ERR,
> + "port %u failed to get command FD from primary
> process",
> + mp_id->port_id);
> + ret = -rte_errno;
> + goto exit;
> + }
> + MLX5_ASSERT(mp_res->num_fds == 1);
> + ret = mp_res->fds[0];
> + DRV_LOG(DEBUG, "port %u command FD from primary is %d",
> + mp_id->port_id, ret);
> +exit:
> + free(mp_rep.msgs);
> + return ret;
> +}
> +
> +/**
> + * Initialize by primary process.
> + */
> +int
> +mlx5_mp_init_primary(const char *name, const rte_mp_t primary_action) {
> + int ret;
> +
> + MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_PRIMARY);
> +
> + /* primary is allowed to not support IPC */
> + ret = rte_mp_action_register(name, primary_action);
> + if (ret && rte_errno != ENOTSUP)
> + return -1;
> + return 0;
> +}
> +
> +/**
> + * Un-initialize by primary process.
> + */
> +void
> +mlx5_mp_uninit_primary(const char *name) {
> + MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_PRIMARY);
> + rte_mp_action_unregister(name);
> +}
> +
> +/**
> + * Initialize by secondary process.
> + */
> +int
> +mlx5_mp_init_secondary(const char *name, const rte_mp_t
> +secondary_action) {
> + MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_SECONDARY);
> + return rte_mp_action_register(name, secondary_action); }
> +
> +/**
> + * Un-initialize by secondary process.
> + */
> +void
> +mlx5_mp_uninit_secondary(const char *name) {
> + MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_SECONDARY);
> + rte_mp_action_unregister(name);
> +}
> diff --git a/drivers/common/mlx5/mlx5_common_mp.h
> b/drivers/common/mlx5/mlx5_common_mp.h
> new file mode 100644
> index 0000000000..7aab77acb2
> --- /dev/null
> +++ b/drivers/common/mlx5/mlx5_common_mp.h
> @@ -0,0 +1,98 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + * Copyright 2018 6WIND S.A.
> + * Copyright 2018 Mellanox Technologies, Ltd */
> +
> +#ifndef RTE_PMD_MLX5_COMMON_MP_H_
> +#define RTE_PMD_MLX5_COMMON_MP_H_
> +
> +/* Verbs header. */
> +/* ISO C doesn't support unnamed structs/unions, disabling -pedantic.
> +*/ #ifdef PEDANTIC #pragma GCC diagnostic ignored "-Wpedantic"
> +#endif
> +#include <infiniband/verbs.h>
> +#ifdef PEDANTIC
> +#pragma GCC diagnostic error "-Wpedantic"
> +#endif
> +
> +#include <rte_eal.h>
> +#include <rte_string_fns.h>
> +
> +/* Request types for IPC. */
> +enum mlx5_mp_req_type {
> + MLX5_MP_REQ_VERBS_CMD_FD = 1,
> + MLX5_MP_REQ_CREATE_MR,
> + MLX5_MP_REQ_START_RXTX,
> + MLX5_MP_REQ_STOP_RXTX,
> + MLX5_MP_REQ_QUEUE_STATE_MODIFY,
> +};
> +
> +struct mlx5_mp_arg_queue_state_modify {
> + uint8_t is_wq; /* Set if WQ. */
> + uint16_t queue_id; /* DPDK queue ID. */
> + enum ibv_wq_state state; /* WQ requested state. */ };
> +
> +/* Pameters for IPC. */
> +struct mlx5_mp_param {
> + enum mlx5_mp_req_type type;
> + int port_id;
> + int result;
> + RTE_STD_C11
> + union {
> + uintptr_t addr; /* MLX5_MP_REQ_CREATE_MR */
> + struct mlx5_mp_arg_queue_state_modify state_modify;
> + /* MLX5_MP_REQ_QUEUE_STATE_MODIFY */
> + } args;
> +};
> +
> +/* Identifier of a MP process */
> +struct mlx5_mp_id {
> + char name[RTE_MP_MAX_NAME_LEN];
> + uint16_t port_id;
> +};
> +
> +/** Request timeout for IPC. */
> +#define MLX5_MP_REQ_TIMEOUT_SEC 5
> +
> +/**
> + * Initialize IPC message.
> + *
> + * @param[in] port_id
> + * Port ID of the device.
> + * @param[out] msg
> + * Pointer to message to fill in.
> + * @param[in] type
> + * Message type.
> + */
> +static inline void
> +mp_init_msg(struct mlx5_mp_id *mp_id, struct rte_mp_msg *msg,
> + enum mlx5_mp_req_type type)
> +{
> + struct mlx5_mp_param *param = (struct mlx5_mp_param *)msg-
> >param;
> +
> + memset(msg, 0, sizeof(*msg));
> + strlcpy(msg->name, mp_id->name, sizeof(msg->name));
> + msg->len_param = sizeof(*param);
> + param->type = type;
> + param->port_id = mp_id->port_id;
> +}
> +
> +__rte_experimental
> +int mlx5_mp_init_primary(const char *name, const rte_mp_t
> +primary_action); __rte_experimental void mlx5_mp_uninit_primary(const
> +char *name); __rte_experimental int mlx5_mp_init_secondary(const char
> +*name, const rte_mp_t secondary_action); __rte_experimental void
> +mlx5_mp_uninit_secondary(const char *name); __rte_experimental int
> +mlx5_mp_req_mr_create(struct mlx5_mp_id *mp_id, uintptr_t addr);
> +__rte_experimental int mlx5_mp_req_queue_state_modify(struct
> mlx5_mp_id
> +*mp_id,
> + struct mlx5_mp_arg_queue_state_modify
> *sm); __rte_experimental
> +int mlx5_mp_req_verbs_cmd_fd(struct mlx5_mp_id *mp_id);
> +
> +#endif /* RTE_PMD_MLX5_COMMON_MP_H_ */
> diff --git a/drivers/common/mlx5/rte_common_mlx5_version.map
> b/drivers/common/mlx5/rte_common_mlx5_version.map
> index aede2a0a51..265703d1c9 100644
> --- a/drivers/common/mlx5/rte_common_mlx5_version.map
> +++ b/drivers/common/mlx5/rte_common_mlx5_version.map
> @@ -48,4 +48,17 @@ DPDK_20.0.1 {
> mlx5_nl_vlan_vmwa_delete;
>
> mlx5_translate_port_name;
> +
> +};
> +
> +EXPERIMENTAL {
> + global:
> +
> + mlx5_mp_init_primary;
> + mlx5_mp_uninit_primary;
> + mlx5_mp_init_secondary;
> + mlx5_mp_uninit_secondary;
> + mlx5_mp_req_mr_create;
> + mlx5_mp_req_queue_state_modify;
> + mlx5_mp_req_verbs_cmd_fd;
> };
> diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c index
> 293d316413..d87c384422 100644
> --- a/drivers/net/mlx5/mlx5.c
> +++ b/drivers/net/mlx5/mlx5.c
> @@ -38,6 +38,7 @@
> #include <mlx5_glue.h>
> #include <mlx5_devx_cmds.h>
> #include <mlx5_common.h>
> +#include <mlx5_common_mp.h>
>
> #include "mlx5_defs.h"
> #include "mlx5.h"
> @@ -1722,7 +1723,8 @@ mlx5_init_once(void)
> rte_rwlock_init(&sd->mem_event_rwlock);
> rte_mem_event_callback_register("MLX5_MEM_EVENT_CB",
> mlx5_mr_mem_event_cb,
> NULL);
> - ret = mlx5_mp_init_primary();
> + ret = mlx5_mp_init_primary(MLX5_MP_NAME,
> + mlx5_mp_primary_handle);
> if (ret)
> goto out;
> sd->init_done = true;
> @@ -1730,7 +1732,8 @@ mlx5_init_once(void)
> case RTE_PROC_SECONDARY:
> if (ld->init_done)
> break;
> - ret = mlx5_mp_init_secondary();
> + ret = mlx5_mp_init_secondary(MLX5_MP_NAME,
> + mlx5_mp_secondary_handle);
> if (ret)
> goto out;
> ++sd->secondary_cnt;
> @@ -2205,6 +2208,8 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
> }
> DRV_LOG(DEBUG, "naming Ethernet device \"%s\"", name);
> if (rte_eal_process_type() == RTE_PROC_SECONDARY) {
> + struct mlx5_mp_id mp_id;
> +
> eth_dev = rte_eth_dev_attach_secondary(name);
> if (eth_dev == NULL) {
> DRV_LOG(ERR, "can not attach rte ethdev"); @@ -
> 2216,8 +2221,10 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
> err = mlx5_proc_priv_init(eth_dev);
> if (err)
> return NULL;
> + mp_id.port_id = eth_dev->data->port_id;
> + strlcpy(mp_id.name, MLX5_MP_NAME,
> RTE_MP_MAX_NAME_LEN);
> /* Receive command fd from primary process */
> - err = mlx5_mp_req_verbs_cmd_fd(eth_dev);
> + err = mlx5_mp_req_verbs_cmd_fd(&mp_id);
> if (err < 0)
> return NULL;
> /* Remap UAR for Tx queues. */
> @@ -2379,6 +2386,8 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
> priv->ibv_port = spawn->ibv_port;
> priv->pci_dev = spawn->pci_dev;
> priv->mtu = RTE_ETHER_MTU;
> + priv->mp_id.port_id = port_id;
> + strlcpy(priv->mp_id.name, MLX5_MP_NAME,
> RTE_MP_MAX_NAME_LEN);
> #ifndef RTE_ARCH_64
> /* Initialize UAR access locks for 32bit implementations. */
> rte_spinlock_init(&priv->uar_lock_cq);
> diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h index
> fccfe47341..e9d5868883 100644
> --- a/drivers/net/mlx5/mlx5.h
> +++ b/drivers/net/mlx5/mlx5.h
> @@ -36,43 +36,13 @@
> #include <mlx5_devx_cmds.h>
> #include <mlx5_prm.h>
> #include <mlx5_nl.h>
> +#include <mlx5_common_mp.h>
>
> #include "mlx5_defs.h"
> #include "mlx5_utils.h"
> #include "mlx5_mr.h"
> #include "mlx5_autoconf.h"
>
> -/* Request types for IPC. */
> -enum mlx5_mp_req_type {
> - MLX5_MP_REQ_VERBS_CMD_FD = 1,
> - MLX5_MP_REQ_CREATE_MR,
> - MLX5_MP_REQ_START_RXTX,
> - MLX5_MP_REQ_STOP_RXTX,
> - MLX5_MP_REQ_QUEUE_STATE_MODIFY,
> -};
> -
> -struct mlx5_mp_arg_queue_state_modify {
> - uint8_t is_wq; /* Set if WQ. */
> - uint16_t queue_id; /* DPDK queue ID. */
> - enum ibv_wq_state state; /* WQ requested state. */
> -};
> -
> -/* Pameters for IPC. */
> -struct mlx5_mp_param {
> - enum mlx5_mp_req_type type;
> - int port_id;
> - int result;
> - RTE_STD_C11
> - union {
> - uintptr_t addr; /* MLX5_MP_REQ_CREATE_MR */
> - struct mlx5_mp_arg_queue_state_modify state_modify;
> - /* MLX5_MP_REQ_QUEUE_STATE_MODIFY */
> - } args;
> -};
> -
> -/** Request timeout for IPC. */
> -#define MLX5_MP_REQ_TIMEOUT_SEC 5
> -
> /** Key string for IPC. */
> #define MLX5_MP_NAME "net_mlx5_mp"
>
> @@ -583,6 +553,7 @@ struct mlx5_priv {
> #endif
> uint8_t skip_default_rss_reta; /* Skip configuration of default reta. */
> uint8_t fdb_def_rule; /* Whether fdb jump to table 1 is configured. */
> + struct mlx5_mp_id mp_id; /* ID of a multi-process process */
> };
>
> #define PORT_ID(priv) ((priv)->dev_data->port_id) @@ -783,16 +754,10 @@
> int mlx5_flow_dev_dump(struct rte_eth_dev *dev, FILE *file,
> struct rte_flow_error *error);
>
> /* mlx5_mp.c */
> +int mlx5_mp_primary_handle(const struct rte_mp_msg *mp_msg, const void
> +*peer); int mlx5_mp_secondary_handle(const struct rte_mp_msg *mp_msg,
> +const void *peer);
> void mlx5_mp_req_start_rxtx(struct rte_eth_dev *dev); void
> mlx5_mp_req_stop_rxtx(struct rte_eth_dev *dev); -int
> mlx5_mp_req_mr_create(struct rte_eth_dev *dev, uintptr_t addr); -int
> mlx5_mp_req_verbs_cmd_fd(struct rte_eth_dev *dev); -int
> mlx5_mp_req_queue_state_modify(struct rte_eth_dev *dev,
> - struct mlx5_mp_arg_queue_state_modify
> *sm);
> -int mlx5_mp_init_primary(void);
> -void mlx5_mp_uninit_primary(void);
> -int mlx5_mp_init_secondary(void);
> -void mlx5_mp_uninit_secondary(void);
>
> /* mlx5_socket.c */
>
> diff --git a/drivers/net/mlx5/mlx5_mp.c b/drivers/net/mlx5/mlx5_mp.c index
> 55d408fe95..43684dbc3a 100644
> --- a/drivers/net/mlx5/mlx5_mp.c
> +++ b/drivers/net/mlx5/mlx5_mp.c
> @@ -10,46 +10,14 @@
> #include <rte_ethdev_driver.h>
> #include <rte_string_fns.h>
>
> +#include <mlx5_common_mp.h>
> +
> #include "mlx5.h"
> #include "mlx5_rxtx.h"
> #include "mlx5_utils.h"
>
> -/**
> - * Initialize IPC message.
> - *
> - * @param[in] dev
> - * Pointer to Ethernet structure.
> - * @param[out] msg
> - * Pointer to message to fill in.
> - * @param[in] type
> - * Message type.
> - */
> -static inline void
> -mp_init_msg(struct rte_eth_dev *dev, struct rte_mp_msg *msg,
> - enum mlx5_mp_req_type type)
> -{
> - struct mlx5_mp_param *param = (struct mlx5_mp_param *)msg-
> >param;
> -
> - memset(msg, 0, sizeof(*msg));
> - strlcpy(msg->name, MLX5_MP_NAME, sizeof(msg->name));
> - msg->len_param = sizeof(*param);
> - param->type = type;
> - param->port_id = dev->data->port_id;
> -}
> -
> -/**
> - * IPC message handler of primary process.
> - *
> - * @param[in] dev
> - * Pointer to Ethernet structure.
> - * @param[in] peer
> - * Pointer to the peer socket path.
> - *
> - * @return
> - * 0 on success, a negative errno value otherwise and rte_errno is set.
> - */
> -static int
> -mp_primary_handle(const struct rte_mp_msg *mp_msg, const void *peer)
> +int
> +mlx5_mp_primary_handle(const struct rte_mp_msg *mp_msg, const void
> +*peer)
> {
> struct rte_mp_msg mp_res;
> struct mlx5_mp_param *res = (struct mlx5_mp_param
> *)mp_res.param; @@ -71,21 +39,21 @@ mp_primary_handle(const struct
> rte_mp_msg *mp_msg, const void *peer)
> priv = dev->data->dev_private;
> switch (param->type) {
> case MLX5_MP_REQ_CREATE_MR:
> - mp_init_msg(dev, &mp_res, param->type);
> + mp_init_msg(&priv->mp_id, &mp_res, param->type);
> lkey = mlx5_mr_create_primary(dev, &entry, param-
> >args.addr);
> if (lkey == UINT32_MAX)
> res->result = -rte_errno;
> ret = rte_mp_reply(&mp_res, peer);
> break;
> case MLX5_MP_REQ_VERBS_CMD_FD:
> - mp_init_msg(dev, &mp_res, param->type);
> + mp_init_msg(&priv->mp_id, &mp_res, param->type);
> mp_res.num_fds = 1;
> mp_res.fds[0] = priv->sh->ctx->cmd_fd;
> res->result = 0;
> ret = rte_mp_reply(&mp_res, peer);
> break;
> case MLX5_MP_REQ_QUEUE_STATE_MODIFY:
> - mp_init_msg(dev, &mp_res, param->type);
> + mp_init_msg(&priv->mp_id, &mp_res, param->type);
> res->result = mlx5_queue_state_modify_primary
> (dev, ¶m->args.state_modify);
> ret = rte_mp_reply(&mp_res, peer);
> @@ -110,14 +78,15 @@ mp_primary_handle(const struct rte_mp_msg
> *mp_msg, const void *peer)
> * @return
> * 0 on success, a negative errno value otherwise and rte_errno is set.
> */
> -static int
> -mp_secondary_handle(const struct rte_mp_msg *mp_msg, const void *peer)
> +int
> +mlx5_mp_secondary_handle(const struct rte_mp_msg *mp_msg, const void
> +*peer)
> {
> struct rte_mp_msg mp_res;
> struct mlx5_mp_param *res = (struct mlx5_mp_param
> *)mp_res.param;
> const struct mlx5_mp_param *param =
> (const struct mlx5_mp_param *)mp_msg->param;
> struct rte_eth_dev *dev;
> + struct mlx5_priv *priv;
> int ret;
>
> MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_SECONDARY);
> @@ -127,13 +96,14 @@ mp_secondary_handle(const struct rte_mp_msg
> *mp_msg, const void *peer)
> return -rte_errno;
> }
> dev = &rte_eth_devices[param->port_id];
> + priv = dev->data->dev_private;
> switch (param->type) {
> case MLX5_MP_REQ_START_RXTX:
> DRV_LOG(INFO, "port %u starting datapath", dev->data-
> >port_id);
> rte_mb();
> dev->rx_pkt_burst = mlx5_select_rx_function(dev);
> dev->tx_pkt_burst = mlx5_select_tx_function(dev);
> - mp_init_msg(dev, &mp_res, param->type);
> + mp_init_msg(&priv->mp_id, &mp_res, param->type);
> res->result = 0;
> ret = rte_mp_reply(&mp_res, peer);
> break;
> @@ -142,7 +112,7 @@ mp_secondary_handle(const struct rte_mp_msg
> *mp_msg, const void *peer)
> dev->rx_pkt_burst = removed_rx_burst;
> dev->tx_pkt_burst = removed_tx_burst;
> rte_mb();
> - mp_init_msg(dev, &mp_res, param->type);
> + mp_init_msg(&priv->mp_id, &mp_res, param->type);
> res->result = 0;
> ret = rte_mp_reply(&mp_res, peer);
> break;
> @@ -171,6 +141,7 @@ mp_req_on_rxtx(struct rte_eth_dev *dev, enum
> mlx5_mp_req_type type)
> struct rte_mp_reply mp_rep;
> struct mlx5_mp_param *res;
> struct timespec ts = {.tv_sec = MLX5_MP_REQ_TIMEOUT_SEC, .tv_nsec
> = 0};
> + struct mlx5_priv *priv = dev->data->dev_private;
> int ret;
> int i;
>
> @@ -182,7 +153,7 @@ mp_req_on_rxtx(struct rte_eth_dev *dev, enum
> mlx5_mp_req_type type)
> dev->data->port_id, type);
> return;
> }
> - mp_init_msg(dev, &mp_req, type);
> + mp_init_msg(&priv->mp_id, &mp_req, type);
> ret = rte_mp_request_sync(&mp_req, &mp_rep, &ts);
> if (ret) {
> if (rte_errno != ENOTSUP)
> @@ -234,178 +205,3 @@ mlx5_mp_req_stop_rxtx(struct rte_eth_dev *dev) {
> mp_req_on_rxtx(dev, MLX5_MP_REQ_STOP_RXTX); }
> -
> -/**
> - * Request Memory Region creation to the primary process.
> - *
> - * @param[in] dev
> - * Pointer to Ethernet structure.
> - * @param addr
> - * Target virtual address to register.
> - *
> - * @return
> - * 0 on success, a negative errno value otherwise and rte_errno is set.
> - */
> -int
> -mlx5_mp_req_mr_create(struct rte_eth_dev *dev, uintptr_t addr) -{
> - struct rte_mp_msg mp_req;
> - struct rte_mp_msg *mp_res;
> - struct rte_mp_reply mp_rep;
> - struct mlx5_mp_param *req = (struct mlx5_mp_param
> *)mp_req.param;
> - struct mlx5_mp_param *res;
> - struct timespec ts = {.tv_sec = MLX5_MP_REQ_TIMEOUT_SEC, .tv_nsec
> = 0};
> - int ret;
> -
> - MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_SECONDARY);
> - mp_init_msg(dev, &mp_req, MLX5_MP_REQ_CREATE_MR);
> - req->args.addr = addr;
> - ret = rte_mp_request_sync(&mp_req, &mp_rep, &ts);
> - if (ret) {
> - DRV_LOG(ERR, "port %u request to primary process failed",
> - dev->data->port_id);
> - return -rte_errno;
> - }
> - MLX5_ASSERT(mp_rep.nb_received == 1);
> - mp_res = &mp_rep.msgs[0];
> - res = (struct mlx5_mp_param *)mp_res->param;
> - ret = res->result;
> - if (ret)
> - rte_errno = -ret;
> - free(mp_rep.msgs);
> - return ret;
> -}
> -
> -/**
> - * Request Verbs queue state modification to the primary process.
> - *
> - * @param[in] dev
> - * Pointer to Ethernet structure.
> - * @param sm
> - * State modify parameters.
> - *
> - * @return
> - * 0 on success, a negative errno value otherwise and rte_errno is set.
> - */
> -int
> -mlx5_mp_req_queue_state_modify(struct rte_eth_dev *dev,
> - struct mlx5_mp_arg_queue_state_modify *sm)
> -{
> - struct rte_mp_msg mp_req;
> - struct rte_mp_msg *mp_res;
> - struct rte_mp_reply mp_rep;
> - struct mlx5_mp_param *req = (struct mlx5_mp_param
> *)mp_req.param;
> - struct mlx5_mp_param *res;
> - struct timespec ts = {.tv_sec = MLX5_MP_REQ_TIMEOUT_SEC, .tv_nsec
> = 0};
> - int ret;
> -
> - MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_SECONDARY);
> - mp_init_msg(dev, &mp_req, MLX5_MP_REQ_QUEUE_STATE_MODIFY);
> - req->args.state_modify = *sm;
> - ret = rte_mp_request_sync(&mp_req, &mp_rep, &ts);
> - if (ret) {
> - DRV_LOG(ERR, "port %u request to primary process failed",
> - dev->data->port_id);
> - return -rte_errno;
> - }
> - MLX5_ASSERT(mp_rep.nb_received == 1);
> - mp_res = &mp_rep.msgs[0];
> - res = (struct mlx5_mp_param *)mp_res->param;
> - ret = res->result;
> - free(mp_rep.msgs);
> - return ret;
> -}
> -
> -/**
> - * Request Verbs command file descriptor for mmap to the primary process.
> - *
> - * @param[in] dev
> - * Pointer to Ethernet structure.
> - *
> - * @return
> - * fd on success, a negative errno value otherwise and rte_errno is set.
> - */
> -int
> -mlx5_mp_req_verbs_cmd_fd(struct rte_eth_dev *dev) -{
> - struct rte_mp_msg mp_req;
> - struct rte_mp_msg *mp_res;
> - struct rte_mp_reply mp_rep;
> - struct mlx5_mp_param *res;
> - struct timespec ts = {.tv_sec = MLX5_MP_REQ_TIMEOUT_SEC, .tv_nsec
> = 0};
> - int ret;
> -
> - MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_SECONDARY);
> - mp_init_msg(dev, &mp_req, MLX5_MP_REQ_VERBS_CMD_FD);
> - ret = rte_mp_request_sync(&mp_req, &mp_rep, &ts);
> - if (ret) {
> - DRV_LOG(ERR, "port %u request to primary process failed",
> - dev->data->port_id);
> - return -rte_errno;
> - }
> - MLX5_ASSERT(mp_rep.nb_received == 1);
> - mp_res = &mp_rep.msgs[0];
> - res = (struct mlx5_mp_param *)mp_res->param;
> - if (res->result) {
> - rte_errno = -res->result;
> - DRV_LOG(ERR,
> - "port %u failed to get command FD from primary
> process",
> - dev->data->port_id);
> - ret = -rte_errno;
> - goto exit;
> - }
> - MLX5_ASSERT(mp_res->num_fds == 1);
> - ret = mp_res->fds[0];
> - DRV_LOG(DEBUG, "port %u command FD from primary is %d",
> - dev->data->port_id, ret);
> -exit:
> - free(mp_rep.msgs);
> - return ret;
> -}
> -
> -/**
> - * Initialize by primary process.
> - */
> -int
> -mlx5_mp_init_primary(void)
> -{
> - int ret;
> -
> - MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_PRIMARY);
> -
> - /* primary is allowed to not support IPC */
> - ret = rte_mp_action_register(MLX5_MP_NAME, mp_primary_handle);
> - if (ret && rte_errno != ENOTSUP)
> - return -1;
> - return 0;
> -}
> -
> -/**
> - * Un-initialize by primary process.
> - */
> -void
> -mlx5_mp_uninit_primary(void)
> -{
> - MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_PRIMARY);
> - rte_mp_action_unregister(MLX5_MP_NAME);
> -}
> -
> -/**
> - * Initialize by secondary process.
> - */
> -int
> -mlx5_mp_init_secondary(void)
> -{
> - MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_SECONDARY);
> - return rte_mp_action_register(MLX5_MP_NAME,
> mp_secondary_handle);
> -}
> -
> -/**
> - * Un-initialize by secondary process.
> - */
> -void
> -mlx5_mp_uninit_secondary(void)
> -{
> - MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_SECONDARY);
> - rte_mp_action_unregister(MLX5_MP_NAME);
> -}
> diff --git a/drivers/net/mlx5/mlx5_mr.c b/drivers/net/mlx5/mlx5_mr.c index
> a8f185a208..9151992a72 100644
> --- a/drivers/net/mlx5/mlx5_mr.c
> +++ b/drivers/net/mlx5/mlx5_mr.c
> @@ -540,7 +540,7 @@ mlx5_mr_create_secondary(struct rte_eth_dev *dev,
> struct mlx5_mr_cache *entry,
>
> DEBUG("port %u requesting MR creation for address (%p)",
> dev->data->port_id, (void *)addr);
> - ret = mlx5_mp_req_mr_create(dev, addr);
> + ret = mlx5_mp_req_mr_create(&priv->mp_id, addr);
> if (ret) {
> DEBUG("port %u fail to request MR creation for address
> (%p)",
> dev->data->port_id, (void *)addr); diff --git
> a/drivers/net/mlx5/mlx5_rxtx.c b/drivers/net/mlx5/mlx5_rxtx.c index
> 7ce3732fd3..42d7da8a4b 100644
> --- a/drivers/net/mlx5/mlx5_rxtx.c
> +++ b/drivers/net/mlx5/mlx5_rxtx.c
> @@ -1000,6 +1000,7 @@ static int
> mlx5_queue_state_modify(struct rte_eth_dev *dev,
> struct mlx5_mp_arg_queue_state_modify *sm) {
> + struct mlx5_priv *priv = dev->data->dev_private;
> int ret = 0;
>
> switch (rte_eal_process_type()) {
> @@ -1007,7 +1008,7 @@ mlx5_queue_state_modify(struct rte_eth_dev *dev,
> ret = mlx5_queue_state_modify_primary(dev, sm);
> break;
> case RTE_PROC_SECONDARY:
> - ret = mlx5_mp_req_queue_state_modify(dev, sm);
> + ret = mlx5_mp_req_queue_state_modify(&priv->mp_id, sm);
> break;
> default:
> break;
> --
> 2.16.6
next prev parent reply other threads:[~2020-04-14 7:26 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-02 19:21 [dpdk-dev] [PATCH 0/4] refactor multi-process IPC and memory management " Vu Pham
2020-04-02 19:21 ` [dpdk-dev] [PATCH 1/4] common/mlx5: refactor multi-process IPC handling " Vu Pham
2020-04-02 19:21 ` [dpdk-dev] [PATCH 2/4] net/mlx5: modify net PMD to use common multi-process APIs Vu Pham
2020-04-02 19:21 ` [dpdk-dev] [PATCH 3/4] common/mlx5: refactor memory management codes Vu Pham
2020-04-02 19:21 ` [dpdk-dev] [PATCH 4/4] net/mlx5: modify net PMD to use common memory management driver Vu Pham
2020-04-07 16:48 ` [dpdk-dev] [PATCH v2 0/4] refactor multi-process IPC and memory management codes to common driver Vu Pham
2020-04-07 16:48 ` [dpdk-dev] [PATCH v2 1/4] common/mlx5: refactor MP IPC handling " Vu Pham
2020-04-08 9:05 ` Slava Ovsiienko
2020-04-07 16:48 ` [dpdk-dev] [PATCH v2 2/4] net/mlx5: modify net pmd to use common multi-process APIs Vu Pham
2020-04-07 16:48 ` [dpdk-dev] [PATCH v2 3/4] common/mlx5: refactor memory management codes Vu Pham
2020-04-07 16:48 ` [dpdk-dev] [PATCH v2 4/4] net/mlx5: modify net pmd to use common MR driver Vu Pham
2020-04-07 17:00 ` [dpdk-dev] [PATCH v3 0/4] refactor multi-process IPC and memory management codes to common driver Vu Pham
2020-04-07 17:00 ` [dpdk-dev] [PATCH v3 1/4] common/mlx5: refactor multi-process IPC handling " Vu Pham
2020-04-08 9:05 ` Slava Ovsiienko
2020-04-07 17:00 ` [dpdk-dev] [PATCH v3 2/4] net/mlx5: modify net PMD to use common multi-process APIs Vu Pham
2020-04-08 9:05 ` Slava Ovsiienko
2020-04-07 17:00 ` [dpdk-dev] [PATCH v3 3/4] common/mlx5: refactor memory management codes Vu Pham
2020-04-08 9:04 ` Slava Ovsiienko
2020-04-07 17:00 ` [dpdk-dev] [PATCH v3 4/4] net/mlx5: modify net PMD to use common MR driver Vu Pham
2020-04-08 9:06 ` Slava Ovsiienko
2020-04-13 21:17 ` [dpdk-dev] [PATCH v4 0/2] refactor multi-process IPC and memory management codes to common driver Vu Pham
2020-04-13 21:17 ` [dpdk-dev] [PATCH v4 1/2] common/mlx5: refactor multi-process IPC handling " Vu Pham
2020-04-14 7:26 ` Slava Ovsiienko [this message]
2020-04-13 21:17 ` [dpdk-dev] [PATCH v4 2/2] common/mlx5: refactor memory management codes Vu Pham
2020-04-14 7:27 ` Slava Ovsiienko
2020-04-15 9:30 ` [dpdk-dev] [PATCH v4 0/2] refactor multi-process IPC and memory management codes to common driver Raslan Darawsheh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=AM4PR05MB3265B6C2E59A76EAFD09CDC5D2DA0@AM4PR05MB3265.eurprd05.prod.outlook.com \
--to=viacheslavo@mellanox.com \
--cc=dev@dpdk.org \
--cc=matan@mellanox.com \
--cc=orika@mellanox.com \
--cc=rasland@mellanox.com \
--cc=vuhuong@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).