From: Slava Ovsiienko <viacheslavo@mellanox.com>
To: Vu Pham <vuhuong@mellanox.com>, "dev@dpdk.org" <dev@dpdk.org>
Cc: Ori Kam <orika@mellanox.com>, Matan Azrad <matan@mellanox.com>,
Raslan Darawsheh <rasland@mellanox.com>,
Vu Pham <vuhuong@mellanox.com>
Subject: Re: [dpdk-dev] [PATCH v3 1/4] common/mlx5: refactor multi-process IPC handling codes to common driver
Date: Wed, 8 Apr 2020 09:05:46 +0000 [thread overview]
Message-ID: <AM4PR05MB3265E71FCB7A0F0271E87F82D2C00@AM4PR05MB3265.eurprd05.prod.outlook.com> (raw)
In-Reply-To: <20200407170058.9274-2-vuhuong@mellanox.com>
> -----Original Message-----
> From: Vu Pham <vuhuong@mellanox.com>
> Sent: Tuesday, April 7, 2020 20:01
> To: dev@dpdk.org
> Cc: Slava Ovsiienko <viacheslavo@mellanox.com>; Ori Kam
> <orika@mellanox.com>; Matan Azrad <matan@mellanox.com>; Raslan
> Darawsheh <rasland@mellanox.com>; Vu Pham <vuhuong@mellanox.com>
> Subject: [PATCH v3 1/4] common/mlx5: refactor multi-process IPC handling
> codes to common driver
>
> Refactor common multi-process handling codes from net PMD to common
> driver. Using tuple mp_id{name, port_id} as standard input parameter for all
> multi-process IPC APIs instead of using rte_eth_dev.
>
> Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
> ---
> drivers/common/mlx5/mlx5_common_mp.c | 188
> ++++++++++++++++++++++++
> drivers/common/mlx5/mlx5_common_mp.h | 98 ++++++++++++
> drivers/common/mlx5/rte_common_mlx5_version.map | 13 ++
> 3 files changed, 299 insertions(+)
> create mode 100644 drivers/common/mlx5/mlx5_common_mp.c
> create mode 100644 drivers/common/mlx5/mlx5_common_mp.h
>
> diff --git a/drivers/common/mlx5/mlx5_common_mp.c
> b/drivers/common/mlx5/mlx5_common_mp.c
> new file mode 100644
> index 0000000000..da55143bc1
> --- /dev/null
> +++ b/drivers/common/mlx5/mlx5_common_mp.c
> @@ -0,0 +1,188 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + * Copyright 2019 6WIND S.A.
> + * Copyright 2019 Mellanox Technologies, Ltd */
> +
> +#include <stdio.h>
> +#include <time.h>
> +
> +#include <rte_eal.h>
> +#include <rte_errno.h>
> +
> +#include "mlx5_common_mp.h"
> +#include "mlx5_common_utils.h"
> +
> +/**
> + * Request Memory Region creation to the primary process.
> + *
> + * @param[in] mp_id
> + * ID of the MP process.
> + * @param addr
> + * Target virtual address to register.
> + *
> + * @return
> + * 0 on success, a negative errno value otherwise and rte_errno is set.
> + */
> +int
> +mlx5_mp_req_mr_create(struct mlx5_mp_id *mp_id, uintptr_t addr) {
> + struct rte_mp_msg mp_req;
> + struct rte_mp_msg *mp_res;
> + struct rte_mp_reply mp_rep;
> + struct mlx5_mp_param *req = (struct mlx5_mp_param
> *)mp_req.param;
> + struct mlx5_mp_param *res;
> + struct timespec ts = {.tv_sec = MLX5_MP_REQ_TIMEOUT_SEC, .tv_nsec
> = 0};
> + int ret;
> +
> + MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_SECONDARY);
> + mp_init_msg(mp_id, &mp_req, MLX5_MP_REQ_CREATE_MR);
> + req->args.addr = addr;
> + ret = rte_mp_request_sync(&mp_req, &mp_rep, &ts);
> + if (ret) {
> + DRV_LOG(ERR, "port %u request to primary process failed",
> + mp_id->port_id);
> + return -rte_errno;
> + }
> + MLX5_ASSERT(mp_rep.nb_received == 1);
> + mp_res = &mp_rep.msgs[0];
> + res = (struct mlx5_mp_param *)mp_res->param;
> + ret = res->result;
> + if (ret)
> + rte_errno = -ret;
> + free(mp_rep.msgs);
> + return ret;
> +}
> +
> +/**
> + * Request Verbs queue state modification to the primary process.
> + *
> + * @param[in] mp_id
> + * ID of the MP process.
> + * @param sm
> + * State modify parameters.
> + *
> + * @return
> + * 0 on success, a negative errno value otherwise and rte_errno is set.
> + */
> +int
> +mlx5_mp_req_queue_state_modify(struct mlx5_mp_id *mp_id,
> + struct mlx5_mp_arg_queue_state_modify *sm) {
> + struct rte_mp_msg mp_req;
> + struct rte_mp_msg *mp_res;
> + struct rte_mp_reply mp_rep;
> + struct mlx5_mp_param *req = (struct mlx5_mp_param
> *)mp_req.param;
> + struct mlx5_mp_param *res;
> + struct timespec ts = {.tv_sec = MLX5_MP_REQ_TIMEOUT_SEC, .tv_nsec
> = 0};
> + int ret;
> +
> + MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_SECONDARY);
> + mp_init_msg(mp_id, &mp_req,
> MLX5_MP_REQ_QUEUE_STATE_MODIFY);
> + req->args.state_modify = *sm;
> + ret = rte_mp_request_sync(&mp_req, &mp_rep, &ts);
> + if (ret) {
> + DRV_LOG(ERR, "port %u request to primary process failed",
> + mp_id->port_id);
> + return -rte_errno;
> + }
> + MLX5_ASSERT(mp_rep.nb_received == 1);
> + mp_res = &mp_rep.msgs[0];
> + res = (struct mlx5_mp_param *)mp_res->param;
> + ret = res->result;
> + free(mp_rep.msgs);
> + return ret;
> +}
> +
> +/**
> + * Request Verbs command file descriptor for mmap to the primary process.
> + *
> + * @param[in] mp_id
> + * ID of the MP process.
> + *
> + * @return
> + * fd on success, a negative errno value otherwise and rte_errno is set.
> + */
> +int
> +mlx5_mp_req_verbs_cmd_fd(struct mlx5_mp_id *mp_id) {
> + struct rte_mp_msg mp_req;
> + struct rte_mp_msg *mp_res;
> + struct rte_mp_reply mp_rep;
> + struct mlx5_mp_param *res;
> + struct timespec ts = {.tv_sec = MLX5_MP_REQ_TIMEOUT_SEC, .tv_nsec
> = 0};
> + int ret;
> +
> + MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_SECONDARY);
> + mp_init_msg(mp_id, &mp_req, MLX5_MP_REQ_VERBS_CMD_FD);
> + ret = rte_mp_request_sync(&mp_req, &mp_rep, &ts);
> + if (ret) {
> + DRV_LOG(ERR, "port %u request to primary process failed",
> + mp_id->port_id);
> + return -rte_errno;
> + }
> + MLX5_ASSERT(mp_rep.nb_received == 1);
> + mp_res = &mp_rep.msgs[0];
> + res = (struct mlx5_mp_param *)mp_res->param;
> + if (res->result) {
> + rte_errno = -res->result;
> + DRV_LOG(ERR,
> + "port %u failed to get command FD from primary
> process",
> + mp_id->port_id);
> + ret = -rte_errno;
> + goto exit;
> + }
> + MLX5_ASSERT(mp_res->num_fds == 1);
> + ret = mp_res->fds[0];
> + DRV_LOG(DEBUG, "port %u command FD from primary is %d",
> + mp_id->port_id, ret);
> +exit:
> + free(mp_rep.msgs);
> + return ret;
> +}
> +
> +/**
> + * Initialize by primary process.
> + */
> +int
> +mlx5_mp_init_primary(const char *name, const rte_mp_t primary_action) {
> + int ret;
> +
> + MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_PRIMARY);
> +
> + /* primary is allowed to not support IPC */
> + ret = rte_mp_action_register(name, primary_action);
> + if (ret && rte_errno != ENOTSUP)
> + return -1;
> + return 0;
> +}
> +
> +/**
> + * Un-initialize by primary process.
> + */
> +void
> +mlx5_mp_uninit_primary(const char *name) {
> + MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_PRIMARY);
> + rte_mp_action_unregister(name);
> +}
> +
> +/**
> + * Initialize by secondary process.
> + */
> +int
> +mlx5_mp_init_secondary(const char *name, const rte_mp_t
> +secondary_action) {
> + MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_SECONDARY);
> + return rte_mp_action_register(name, secondary_action); }
> +
> +/**
> + * Un-initialize by secondary process.
> + */
> +void
> +mlx5_mp_uninit_secondary(const char *name) {
> + MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_SECONDARY);
> + rte_mp_action_unregister(name);
> +}
> diff --git a/drivers/common/mlx5/mlx5_common_mp.h
> b/drivers/common/mlx5/mlx5_common_mp.h
> new file mode 100644
> index 0000000000..7aab77acb2
> --- /dev/null
> +++ b/drivers/common/mlx5/mlx5_common_mp.h
> @@ -0,0 +1,98 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + * Copyright 2018 6WIND S.A.
> + * Copyright 2018 Mellanox Technologies, Ltd */
> +
> +#ifndef RTE_PMD_MLX5_COMMON_MP_H_
> +#define RTE_PMD_MLX5_COMMON_MP_H_
> +
> +/* Verbs header. */
> +/* ISO C doesn't support unnamed structs/unions, disabling -pedantic.
> +*/ #ifdef PEDANTIC #pragma GCC diagnostic ignored "-Wpedantic"
> +#endif
> +#include <infiniband/verbs.h>
> +#ifdef PEDANTIC
> +#pragma GCC diagnostic error "-Wpedantic"
> +#endif
> +
> +#include <rte_eal.h>
> +#include <rte_string_fns.h>
> +
> +/* Request types for IPC. */
> +enum mlx5_mp_req_type {
> + MLX5_MP_REQ_VERBS_CMD_FD = 1,
> + MLX5_MP_REQ_CREATE_MR,
> + MLX5_MP_REQ_START_RXTX,
> + MLX5_MP_REQ_STOP_RXTX,
> + MLX5_MP_REQ_QUEUE_STATE_MODIFY,
> +};
> +
> +struct mlx5_mp_arg_queue_state_modify {
> + uint8_t is_wq; /* Set if WQ. */
> + uint16_t queue_id; /* DPDK queue ID. */
> + enum ibv_wq_state state; /* WQ requested state. */ };
> +
> +/* Pameters for IPC. */
> +struct mlx5_mp_param {
> + enum mlx5_mp_req_type type;
> + int port_id;
> + int result;
> + RTE_STD_C11
> + union {
> + uintptr_t addr; /* MLX5_MP_REQ_CREATE_MR */
> + struct mlx5_mp_arg_queue_state_modify state_modify;
> + /* MLX5_MP_REQ_QUEUE_STATE_MODIFY */
> + } args;
> +};
> +
> +/* Identifier of a MP process */
> +struct mlx5_mp_id {
> + char name[RTE_MP_MAX_NAME_LEN];
> + uint16_t port_id;
> +};
> +
> +/** Request timeout for IPC. */
> +#define MLX5_MP_REQ_TIMEOUT_SEC 5
> +
> +/**
> + * Initialize IPC message.
> + *
> + * @param[in] port_id
> + * Port ID of the device.
> + * @param[out] msg
> + * Pointer to message to fill in.
> + * @param[in] type
> + * Message type.
> + */
> +static inline void
> +mp_init_msg(struct mlx5_mp_id *mp_id, struct rte_mp_msg *msg,
> + enum mlx5_mp_req_type type)
> +{
> + struct mlx5_mp_param *param = (struct mlx5_mp_param *)msg-
> >param;
> +
> + memset(msg, 0, sizeof(*msg));
> + strlcpy(msg->name, mp_id->name, sizeof(msg->name));
> + msg->len_param = sizeof(*param);
> + param->type = type;
> + param->port_id = mp_id->port_id;
> +}
> +
> +__rte_experimental
> +int mlx5_mp_init_primary(const char *name, const rte_mp_t
> +primary_action); __rte_experimental void mlx5_mp_uninit_primary(const
> +char *name); __rte_experimental int mlx5_mp_init_secondary(const char
> +*name, const rte_mp_t secondary_action); __rte_experimental void
> +mlx5_mp_uninit_secondary(const char *name); __rte_experimental int
> +mlx5_mp_req_mr_create(struct mlx5_mp_id *mp_id, uintptr_t addr);
> +__rte_experimental int mlx5_mp_req_queue_state_modify(struct
> mlx5_mp_id
> +*mp_id,
> + struct mlx5_mp_arg_queue_state_modify
> *sm); __rte_experimental
> +int mlx5_mp_req_verbs_cmd_fd(struct mlx5_mp_id *mp_id);
> +
> +#endif /* RTE_PMD_MLX5_COMMON_MP_H_ */
> diff --git a/drivers/common/mlx5/rte_common_mlx5_version.map
> b/drivers/common/mlx5/rte_common_mlx5_version.map
> index aede2a0a51..265703d1c9 100644
> --- a/drivers/common/mlx5/rte_common_mlx5_version.map
> +++ b/drivers/common/mlx5/rte_common_mlx5_version.map
> @@ -48,4 +48,17 @@ DPDK_20.0.1 {
> mlx5_nl_vlan_vmwa_delete;
>
> mlx5_translate_port_name;
> +
> +};
> +
> +EXPERIMENTAL {
> + global:
> +
> + mlx5_mp_init_primary;
> + mlx5_mp_uninit_primary;
> + mlx5_mp_init_secondary;
> + mlx5_mp_uninit_secondary;
> + mlx5_mp_req_mr_create;
> + mlx5_mp_req_queue_state_modify;
> + mlx5_mp_req_verbs_cmd_fd;
> };
> --
> 2.16.6
next prev parent reply other threads:[~2020-04-08 9:05 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-02 19:21 [dpdk-dev] [PATCH 0/4] refactor multi-process IPC and memory management " Vu Pham
2020-04-02 19:21 ` [dpdk-dev] [PATCH 1/4] common/mlx5: refactor multi-process IPC handling " Vu Pham
2020-04-02 19:21 ` [dpdk-dev] [PATCH 2/4] net/mlx5: modify net PMD to use common multi-process APIs Vu Pham
2020-04-02 19:21 ` [dpdk-dev] [PATCH 3/4] common/mlx5: refactor memory management codes Vu Pham
2020-04-02 19:21 ` [dpdk-dev] [PATCH 4/4] net/mlx5: modify net PMD to use common memory management driver Vu Pham
2020-04-07 16:48 ` [dpdk-dev] [PATCH v2 0/4] refactor multi-process IPC and memory management codes to common driver Vu Pham
2020-04-07 16:48 ` [dpdk-dev] [PATCH v2 1/4] common/mlx5: refactor MP IPC handling " Vu Pham
2020-04-08 9:05 ` Slava Ovsiienko
2020-04-07 16:48 ` [dpdk-dev] [PATCH v2 2/4] net/mlx5: modify net pmd to use common multi-process APIs Vu Pham
2020-04-07 16:48 ` [dpdk-dev] [PATCH v2 3/4] common/mlx5: refactor memory management codes Vu Pham
2020-04-07 16:48 ` [dpdk-dev] [PATCH v2 4/4] net/mlx5: modify net pmd to use common MR driver Vu Pham
2020-04-07 17:00 ` [dpdk-dev] [PATCH v3 0/4] refactor multi-process IPC and memory management codes to common driver Vu Pham
2020-04-07 17:00 ` [dpdk-dev] [PATCH v3 1/4] common/mlx5: refactor multi-process IPC handling " Vu Pham
2020-04-08 9:05 ` Slava Ovsiienko [this message]
2020-04-07 17:00 ` [dpdk-dev] [PATCH v3 2/4] net/mlx5: modify net PMD to use common multi-process APIs Vu Pham
2020-04-08 9:05 ` Slava Ovsiienko
2020-04-07 17:00 ` [dpdk-dev] [PATCH v3 3/4] common/mlx5: refactor memory management codes Vu Pham
2020-04-08 9:04 ` Slava Ovsiienko
2020-04-07 17:00 ` [dpdk-dev] [PATCH v3 4/4] net/mlx5: modify net PMD to use common MR driver Vu Pham
2020-04-08 9:06 ` Slava Ovsiienko
2020-04-13 21:17 ` [dpdk-dev] [PATCH v4 0/2] refactor multi-process IPC and memory management codes to common driver Vu Pham
2020-04-13 21:17 ` [dpdk-dev] [PATCH v4 1/2] common/mlx5: refactor multi-process IPC handling " Vu Pham
2020-04-14 7:26 ` Slava Ovsiienko
2020-04-13 21:17 ` [dpdk-dev] [PATCH v4 2/2] common/mlx5: refactor memory management codes Vu Pham
2020-04-14 7:27 ` Slava Ovsiienko
2020-04-15 9:30 ` [dpdk-dev] [PATCH v4 0/2] refactor multi-process IPC and memory management codes to common driver Raslan Darawsheh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=AM4PR05MB3265E71FCB7A0F0271E87F82D2C00@AM4PR05MB3265.eurprd05.prod.outlook.com \
--to=viacheslavo@mellanox.com \
--cc=dev@dpdk.org \
--cc=matan@mellanox.com \
--cc=orika@mellanox.com \
--cc=rasland@mellanox.com \
--cc=vuhuong@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).