DPDK patches and discussions
 help / color / mirror / Atom feed
From: Ori Kam <orika@mellanox.com>
To: "pbhagavatula@marvell.com" <pbhagavatula@marvell.com>,
	"ferruh.yigit@intel.com" <ferruh.yigit@intel.com>,
	"arybchenko@solarflare.com" <arybchenko@solarflare.com>,
	"jerinj@marvell.com" <jerinj@marvell.com>,
	John McNamara <john.mcnamara@intel.com>,
	Marko Kovacevic <marko.kovacevic@intel.com>,
	Thomas Monjalon <thomas@monjalon.net>,
	 Adrien Mazarguil <adrien.mazarguil@6wind.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH 1/2] ethdev: add flow action type update as an	offload
Date: Mon, 28 Oct 2019 10:50:26 +0000	[thread overview]
Message-ID: <AM4PR05MB3425C21E79F05FD6BEA24142DB660@AM4PR05MB3425.eurprd05.prod.outlook.com> (raw)
In-Reply-To: <20191025152142.12887-1-pbhagavatula@marvell.com>

Hi Pavan,

Sorry for jumping in late.

I don't understand why we need this feature. If the user didn't set any flow with MARK
then the user doesn't need to check it.

Also it breaks compatibility. 

If my understanding is correct the MARK field is going to be moved to dynamic field, and this 
will be way to control the use of MARK.

Other option is inside the PMD if one flow uses mark only than copy the mark to mbuf.

Please also not that we have deprecation notice on the FDIR.

Thanks,
Ori



> -----Original Message-----
> From: dev <dev-bounces@dpdk.org> On Behalf Of pbhagavatula@marvell.com
> Sent: Friday, October 25, 2019 6:22 PM
> To: ferruh.yigit@intel.com; arybchenko@solarflare.com; jerinj@marvell.com;
> John McNamara <john.mcnamara@intel.com>; Marko Kovacevic
> <marko.kovacevic@intel.com>; Thomas Monjalon <thomas@monjalon.net>;
> Adrien Mazarguil <adrien.mazarguil@6wind.com>
> Cc: dev@dpdk.org; Pavan Nikhilesh <pbhagavatula@marvell.com>
> Subject: [dpdk-dev] [PATCH 1/2] ethdev: add flow action type update as an
> offload
> 
> From: Pavan Nikhilesh <pbhagavatula@marvell.com>
> 
> Add new Rx offload flag `DEV_RX_OFFLOAD_FLOW_MARK` that can be used to
> enable/disable PMDs write to `rte_mbuf::hash::fdir::hi` and
> `rte_mbuf::ol_flags` when flow actions `RTE_FLOW_ACTION_MARK` and
> `RTE_FLOW_ACTION_FLAG` are enabled.
> 
> PMDs notify the validity of `rte_mbuf::hash:fdir::hi` to the applcation
> by enabling `PKT_RX_FDIR_ID` flag in `rte_mbuf::ol_flags`.
> 
> Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
> Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
> ---
>  doc/guides/nics/features.rst           | 12 ++++++++++++
>  doc/guides/rel_notes/release_19_11.rst |  9 +++++++++
>  lib/librte_ethdev/rte_ethdev.c         |  1 +
>  lib/librte_ethdev/rte_ethdev.h         |  1 +
>  lib/librte_ethdev/rte_flow.h           |  6 ++++--
>  5 files changed, 27 insertions(+), 2 deletions(-)
> 
> diff --git a/doc/guides/nics/features.rst b/doc/guides/nics/features.rst
> index d96696801..0d8d08c18 100644
> --- a/doc/guides/nics/features.rst
> +++ b/doc/guides/nics/features.rst
> @@ -588,6 +588,18 @@ Supports packet type parsing and returns a list of
> supported types.
>  * **[related]    API**: ``rte_eth_dev_get_supported_ptypes()``.
> 
> 
> +.. _nic_features_flow_flag_mark:
> +
> +Flow flag/mark update
> +---------------------
> +
> +Supports flow action type update to ``mbuf.ol_flags`` and ``mbuf.hash.fdir.hi``.
> +
> +* **[uses]     rte_eth_rxconf,rte_eth_rxmode**:
> ``offloads:DEV_RX_OFFLOAD_FLOW_MARK``.
> +* **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_FDIR``,
> ``mbuf.ol_flags:PKT_RX_FDIR_ID;``,
> +  ``mbuf.hash.fdir.hi``
> +
> +
>  .. _nic_features_timesync:
> 
>  Timesync
> diff --git a/doc/guides/rel_notes/release_19_11.rst
> b/doc/guides/rel_notes/release_19_11.rst
> index faf69b0d9..8593fea0e 100644
> --- a/doc/guides/rel_notes/release_19_11.rst
> +++ b/doc/guides/rel_notes/release_19_11.rst
> @@ -185,6 +185,15 @@ New Features
>    * Added a console command to testpmd app, ``show port (port_id) ptypes``
> which
>      gives ability to print port supported ptypes in different protocol layers.
> 
> +* **Added Rx offload flag to enable or disable flow action type update**
> +
> +  *  Add new Rx offload flag `DEV_RX_OFFLOAD_FLOW_MARK` that can be
> used to
> +     enable/disable PMDs write to `rte_mbuf::hash::fdir::hi` and
> +     `rte_mbuf::ol_flags` when flow actions `RTE_FLOW_ACTION_MARK` and
> +     `RTE_FLOW_ACTION_FLAG` are enabled.
> +  *  PMDs notify the validity of `rte_mbuf::hash:fdir::hi` to the application
> +     by enabling `PKT_RX_FDIR_ID` flag in `rte_mbuf::ol_flags`.
> +
> 
>  Removed Items
>  -------------
> diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
> index 7743205d3..f70065043 100644
> --- a/lib/librte_ethdev/rte_ethdev.c
> +++ b/lib/librte_ethdev/rte_ethdev.c
> @@ -129,6 +129,7 @@ static const struct {
>  	RTE_RX_OFFLOAD_BIT2STR(KEEP_CRC),
>  	RTE_RX_OFFLOAD_BIT2STR(SCTP_CKSUM),
>  	RTE_RX_OFFLOAD_BIT2STR(OUTER_UDP_CKSUM),
> +	RTE_RX_OFFLOAD_BIT2STR(FLOW_MARK),
>  };
> 
>  #undef RTE_RX_OFFLOAD_BIT2STR
> diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h
> index c36c1b631..c4e626da7 100644
> --- a/lib/librte_ethdev/rte_ethdev.h
> +++ b/lib/librte_ethdev/rte_ethdev.h
> @@ -1048,6 +1048,7 @@ struct rte_eth_conf {
>  #define DEV_RX_OFFLOAD_KEEP_CRC		0x00010000
>  #define DEV_RX_OFFLOAD_SCTP_CKSUM	0x00020000
>  #define DEV_RX_OFFLOAD_OUTER_UDP_CKSUM  0x00040000
> +#define DEV_RX_OFFLOAD_FLOW_MARK	0x00100000
> 
>  #define DEV_RX_OFFLOAD_CHECKSUM (DEV_RX_OFFLOAD_IPV4_CKSUM | \
>  				 DEV_RX_OFFLOAD_UDP_CKSUM | \
> diff --git a/lib/librte_ethdev/rte_flow.h b/lib/librte_ethdev/rte_flow.h
> index 4fee10559..6698640fb 100644
> --- a/lib/librte_ethdev/rte_flow.h
> +++ b/lib/librte_ethdev/rte_flow.h
> @@ -1538,7 +1538,8 @@ enum rte_flow_action_type {
> 
>  	/**
>  	 * Attaches an integer value to packets and sets PKT_RX_FDIR and
> -	 * PKT_RX_FDIR_ID mbuf flags.
> +	 * PKT_RX_FDIR_ID mbuf flags when
> +	 * `rx_mode:offloads:DEV_RX_OFFLOAD_FLOW_MARK` is enabled.
>  	 *
>  	 * See struct rte_flow_action_mark.
>  	 */
> @@ -1546,7 +1547,8 @@ enum rte_flow_action_type {
> 
>  	/**
>  	 * Flags packets. Similar to MARK without a specific value; only
> -	 * sets the PKT_RX_FDIR mbuf flag.
> +	 * sets the PKT_RX_FDIR mbuf flag when
> +	 * `rx_mode:offloads:DEV_RX_OFFLOAD_FLOW_MARK` is enabled.
>  	 *
>  	 * No associated configuration structure.
>  	 */
> --
> 2.17.1


  parent reply	other threads:[~2019-10-28 10:50 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-25 15:21 pbhagavatula
2019-10-25 15:21 ` [dpdk-dev] [PATCH 2/2] drivers/net: update Rx flow flag and mark capabilities pbhagavatula
2019-10-28 10:50 ` Ori Kam [this message]
2019-10-28 11:53   ` [dpdk-dev] [PATCH 1/2] ethdev: add flow action type update as an offload Andrew Rybchenko
2019-10-28 14:00     ` Ori Kam
2019-10-31  9:49       ` Andrew Rybchenko
2019-10-31 14:49         ` Thomas Monjalon
2019-10-31 23:59           ` Zhang, Qi Z
2019-11-01 11:35           ` Andrew Rybchenko
2019-11-03 10:22             ` Ori Kam
2019-11-03 11:41               ` Andrew Rybchenko
2019-11-04 18:37                 ` Ori Kam
2019-11-05  6:50                   ` Andrew Rybchenko
2019-11-05  8:35                     ` Ori Kam
2019-11-05 11:30                       ` Andrew Rybchenko
2019-11-05 16:37                         ` Ori Kam
2019-11-06  6:40                           ` Andrew Rybchenko
2019-11-06  7:42                             ` Ori Kam
2019-11-08  8:35                               ` Andrew Rybchenko
2019-11-08  9:00                                 ` Tom Barbette
2019-11-08 10:28                                 ` Thomas Monjalon
2019-11-08 10:42                                   ` Andrew Rybchenko
2019-11-08 11:03                                     ` Thomas Monjalon
2019-11-08 11:40                                       ` Zhang, Qi Z
2019-11-08 12:12                                         ` Ori Kam
2019-11-08 12:20                                           ` Andrew Rybchenko
2019-11-08 12:42                                             ` Ori Kam
2019-11-08 13:16                                               ` Zhang, Qi Z
2019-11-08 13:26                                                 ` Thomas Monjalon
2019-11-08 13:06                                         ` Thomas Monjalon
2019-11-08 12:00                                       ` Andrew Rybchenko
2019-11-08 13:17                                         ` Thomas Monjalon
2019-11-08 13:27                                           ` Andrew Rybchenko
2019-11-08 13:30                                             ` Thomas Monjalon
2019-11-19  9:24                                               ` Andrew Rybchenko
2019-11-19  9:50                                                 ` Thomas Monjalon
2019-11-19 10:59                                                   ` Andrew Rybchenko
2019-11-19 11:09                                                     ` Thomas Monjalon
2020-07-03 14:34                                                       ` Ferruh Yigit
2021-02-17 13:45                                                         ` Ferruh Yigit
2021-02-17 14:10                                                           ` Thomas Monjalon
2021-04-20  1:05                                                             ` Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=AM4PR05MB3425C21E79F05FD6BEA24142DB660@AM4PR05MB3425.eurprd05.prod.outlook.com \
    --to=orika@mellanox.com \
    --cc=adrien.mazarguil@6wind.com \
    --cc=arybchenko@solarflare.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=jerinj@marvell.com \
    --cc=john.mcnamara@intel.com \
    --cc=marko.kovacevic@intel.com \
    --cc=pbhagavatula@marvell.com \
    --cc=thomas@monjalon.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).