From: Vanshika Shukla <vanshika.shukla@nxp.com>
To: Stephen Hemminger <stephen@networkplumber.org>
Cc: "dev@dpdk.org" <dev@dpdk.org>,
Hemant Agrawal <hemant.agrawal@nxp.com>,
Sachin Saxena <sachin.saxena@nxp.com>,
Jun Yang <jun.yang@nxp.com>
Subject: RE: [EXT] Re: [v4 23/42] net/dpaa2: flow API refactor
Date: Wed, 23 Oct 2024 12:04:03 +0000 [thread overview]
Message-ID: <AS8PR04MB8979D4CCF7EC19F2F9D4E777F44D2@AS8PR04MB8979.eurprd04.prod.outlook.com> (raw)
In-Reply-To: <20241022175251.654d8e5a@hermes.local>
This seems ok.
> -----Original Message-----
> From: Stephen Hemminger <stephen@networkplumber.org>
> Sent: Wednesday, October 23, 2024 6:23 AM
> To: Vanshika Shukla <vanshika.shukla@nxp.com>
> Cc: dev@dpdk.org; Hemant Agrawal <hemant.agrawal@nxp.com>; Sachin
> Saxena <sachin.saxena@nxp.com>; Jun Yang <jun.yang@nxp.com>
> Subject: [EXT] Re: [v4 23/42] net/dpaa2: flow API refactor
>
> Caution: This is an external email. Please take care when clicking links or
> opening attachments. When in doubt, report the message using the 'Report
> this email' button
>
>
> On Wed, 23 Oct 2024 00:42:36 +0530
> vanshika.shukla@nxp.com wrote:
>
> > From: Jun Yang <jun.yang@nxp.com>
> >
> > 1) Gather redundant code with same logic from various protocol
> > handlers to create common functions.
> > 2) struct dpaa2_key_profile is used to describe each extract's
> > offset of rule and size. It's easy to insert new extract previous
> > IP address extract.
> > 3) IP address profile is used to describe ipv4/v6 addresses extracts
> > located at end of rule.
> > 4) L4 ports profile is used to describe the ports positions and offsets
> > of rule.
> > 5) Once the extracts of QoS/FS table are update, go through all
> > the existing flows of this table to update the rule data.
> >
> > Signed-off-by: Jun Yang <jun.yang@nxp.com>
>
> Before it looked possible to dump flow info to file, now it only goes to stdout.
> Is that ok?
next prev parent reply other threads:[~2024-10-23 12:05 UTC|newest]
Thread overview: 226+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-13 5:59 [v1 00/43] DPAA2 specific patches vanshika.shukla
2024-09-13 5:59 ` [v1 01/43] net/dpaa2: enhance Tx scatter-gather mempool vanshika.shukla
2024-09-13 5:59 ` [v1 02/43] net/dpaa2: support PTP packet one-step timestamp vanshika.shukla
2024-09-13 5:59 ` [v1 03/43] net/dpaa2: add proper MTU debugging print vanshika.shukla
2024-09-13 5:59 ` [v1 04/43] net/dpaa2: add support to dump dpdmux counters vanshika.shukla
2024-09-13 5:59 ` [v1 05/43] bus/fslmc: change dpcon close as internal symbol vanshika.shukla
2024-09-13 5:59 ` [v1 06/43] bus/fslmc: add close API to close DPAA2 device vanshika.shukla
2024-09-13 5:59 ` [v1 07/43] net/dpaa2: dpdmux: add support for CVLAN vanshika.shukla
2024-09-13 5:59 ` [v1 08/43] bus/fslmc: upgrade with MC version 10.37 vanshika.shukla
2024-09-13 5:59 ` [v1 09/43] net/dpaa2: support link state for eth interfaces vanshika.shukla
2024-09-13 5:59 ` [v1 10/43] net/dpaa2: update DPNI link status method vanshika.shukla
2024-09-13 5:59 ` [v1 11/43] net/dpaa2: add new PMD API to check dpaa platform version vanshika.shukla
2024-09-13 5:59 ` [v1 12/43] bus/fslmc: improve BMAN buffer acquire vanshika.shukla
2024-09-13 5:59 ` [v1 13/43] bus/fslmc: get MC VFIO group FD directly vanshika.shukla
2024-09-13 5:59 ` [v1 14/43] bus/fslmc: enhance MC VFIO multiprocess support vanshika.shukla
2024-09-13 5:59 ` [v1 15/43] bus/fslmc: free VFIO group FD in case of add group failure vanshika.shukla
2024-09-13 5:59 ` [v1 16/43] bus/fslmc: dynamic IOVA mode configuration vanshika.shukla
2024-09-13 5:59 ` [v1 17/43] bus/fslmc: remove VFIO IRQ mapping vanshika.shukla
2024-09-13 5:59 ` [v1 18/43] bus/fslmc: create dpaa2 device with it's object vanshika.shukla
2024-09-13 5:59 ` [v1 19/43] bus/fslmc: fix coverity issue vanshika.shukla
2024-09-13 5:59 ` [v1 20/43] bus/fslmc: fix invalid error FD code vanshika.shukla
2024-09-13 5:59 ` [v1 21/43] bus/fslmc: change qbman eq desc from d to desc vanshika.shukla
2024-09-13 5:59 ` [v1 22/43] bus/fslmc: introduce VFIO DMA mapping API for fslmc vanshika.shukla
2024-09-13 5:59 ` [v1 23/43] net/dpaa2: change miss flow ID macro name vanshika.shukla
2024-09-13 5:59 ` [v1 24/43] net/dpaa2: flow API refactor vanshika.shukla
2024-09-13 5:59 ` [v1 25/43] net/dpaa2: dump Rx parser result vanshika.shukla
2024-09-13 5:59 ` [v1 26/43] net/dpaa2: enhancement of raw flow extract vanshika.shukla
2024-09-13 5:59 ` [v1 27/43] net/dpaa2: frame attribute flags parser vanshika.shukla
2024-09-13 5:59 ` [v1 28/43] net/dpaa2: add VXLAN distribution support vanshika.shukla
2024-09-13 5:59 ` [v1 29/43] net/dpaa2: protocol inside tunnel distribution vanshika.shukla
2024-09-13 5:59 ` [v1 30/43] net/dpaa2: eCPRI support by parser result vanshika.shukla
2024-09-13 5:59 ` [v1 31/43] net/dpaa2: add GTP flow support vanshika.shukla
2024-09-13 5:59 ` [v1 32/43] net/dpaa2: check if Soft parser is loaded vanshika.shukla
2024-09-13 5:59 ` [v1 33/43] net/dpaa2: soft parser flow verification vanshika.shukla
2024-09-13 5:59 ` [v1 34/43] net/dpaa2: add flow support for IPsec AH and ESP vanshika.shukla
2024-09-13 5:59 ` [v1 35/43] net/dpaa2: fix memory corruption in TM vanshika.shukla
2024-09-13 5:59 ` [v1 36/43] net/dpaa2: support software taildrop vanshika.shukla
2024-09-13 5:59 ` [v1 37/43] net/dpaa2: check IOVA before sending MC command vanshika.shukla
2024-09-13 5:59 ` [v1 38/43] net/dpaa2: improve DPDMUX error behavior settings vanshika.shukla
2024-09-13 5:59 ` [v1 39/43] net/dpaa2: store drop priority in mbuf vanshika.shukla
2024-09-13 5:59 ` [v1 40/43] net/dpaa2: add API to get endpoint name vanshika.shukla
2024-09-13 5:59 ` [v1 41/43] net/dpaa2: support VLAN traffic splitting vanshika.shukla
2024-09-13 5:59 ` [v1 42/43] net/dpaa2: add support for C-VLAN and MAC vanshika.shukla
2024-09-13 5:59 ` [v1 43/43] net/dpaa2: dpdmux single flow/multiple rules support vanshika.shukla
2024-09-18 7:50 ` [v2 00/43] DPAA2 specific patches vanshika.shukla
2024-09-18 7:50 ` [v2 01/43] net/dpaa2: enhance Tx scatter-gather mempool vanshika.shukla
2024-10-14 12:00 ` [v3 00/43] DPAA2 specific patches vanshika.shukla
2024-10-14 12:00 ` [v3 01/43] net/dpaa2: enhance Tx scatter-gather mempool vanshika.shukla
2024-10-14 12:00 ` [v3 02/43] net/dpaa2: support PTP packet one-step timestamp vanshika.shukla
2024-10-14 12:00 ` [v3 03/43] net/dpaa2: add proper MTU debugging print vanshika.shukla
2024-10-14 12:00 ` [v3 04/43] net/dpaa2: add support to dump dpdmux counters vanshika.shukla
2024-10-14 12:00 ` [v3 05/43] bus/fslmc: change dpcon close as internal symbol vanshika.shukla
2024-10-14 12:00 ` [v3 06/43] bus/fslmc: add close API to close DPAA2 device vanshika.shukla
2024-10-14 12:00 ` [v3 07/43] net/dpaa2: dpdmux: add support for CVLAN vanshika.shukla
2024-10-14 12:00 ` [v3 08/43] bus/fslmc: upgrade with MC version 10.37 vanshika.shukla
2024-10-14 12:00 ` [v3 09/43] net/dpaa2: support link state for eth interfaces vanshika.shukla
2024-10-14 12:00 ` [v3 10/43] net/dpaa2: update DPNI link status method vanshika.shukla
2024-10-14 12:00 ` [v3 11/43] net/dpaa2: add new PMD API to check dpaa platform version vanshika.shukla
2024-10-14 12:00 ` [v3 12/43] bus/fslmc: improve BMAN buffer acquire vanshika.shukla
2024-10-14 12:00 ` [v3 13/43] bus/fslmc: get MC VFIO group FD directly vanshika.shukla
2024-10-15 2:27 ` Stephen Hemminger
2024-10-14 12:00 ` [v3 14/43] bus/fslmc: enhance MC VFIO multiprocess support vanshika.shukla
2024-10-15 2:29 ` Stephen Hemminger
2024-10-14 12:00 ` [v3 15/43] bus/fslmc: free VFIO group FD in case of add group failure vanshika.shukla
2024-10-14 12:00 ` [v3 16/43] bus/fslmc: dynamic IOVA mode configuration vanshika.shukla
2024-10-15 2:31 ` Stephen Hemminger
2024-10-14 12:01 ` [v3 17/43] bus/fslmc: remove VFIO IRQ mapping vanshika.shukla
2024-10-14 12:01 ` [v3 18/43] bus/fslmc: create dpaa2 device with it's object vanshika.shukla
2024-10-14 12:01 ` [v3 19/43] bus/fslmc: fix coverity issue vanshika.shukla
2024-10-14 12:01 ` [v3 20/43] bus/fslmc: fix invalid error FD code vanshika.shukla
2024-10-14 12:01 ` [v3 21/43] bus/fslmc: change qbman eq desc from d to desc vanshika.shukla
2024-10-14 12:01 ` [v3 22/43] bus/fslmc: introduce VFIO DMA mapping API for fslmc vanshika.shukla
2024-10-14 12:01 ` [v3 23/43] net/dpaa2: change miss flow ID macro name vanshika.shukla
2024-10-14 12:01 ` [v3 24/43] net/dpaa2: flow API refactor vanshika.shukla
2024-10-14 12:01 ` [v3 25/43] net/dpaa2: dump Rx parser result vanshika.shukla
2024-10-14 12:01 ` [v3 26/43] net/dpaa2: enhancement of raw flow extract vanshika.shukla
2024-10-14 12:01 ` [v3 27/43] net/dpaa2: frame attribute flags parser vanshika.shukla
2024-10-14 12:01 ` [v3 28/43] net/dpaa2: add VXLAN distribution support vanshika.shukla
2024-10-14 12:01 ` [v3 29/43] net/dpaa2: protocol inside tunnel distribution vanshika.shukla
2024-10-14 12:01 ` [v3 30/43] net/dpaa2: eCPRI support by parser result vanshika.shukla
2024-10-14 12:01 ` [v3 31/43] net/dpaa2: add GTP flow support vanshika.shukla
2024-10-14 12:01 ` [v3 32/43] net/dpaa2: check if Soft parser is loaded vanshika.shukla
2024-10-14 12:01 ` [v3 33/43] net/dpaa2: soft parser flow verification vanshika.shukla
2024-10-14 12:01 ` [v3 34/43] net/dpaa2: add flow support for IPsec AH and ESP vanshika.shukla
2024-10-14 12:01 ` [v3 35/43] net/dpaa2: fix memory corruption in TM vanshika.shukla
2024-10-14 12:01 ` [v3 36/43] net/dpaa2: support software taildrop vanshika.shukla
2024-10-14 12:01 ` [v3 37/43] net/dpaa2: check IOVA before sending MC command vanshika.shukla
2024-10-14 12:01 ` [v3 38/43] net/dpaa2: improve DPDMUX error behavior settings vanshika.shukla
2024-10-14 12:01 ` [v3 39/43] net/dpaa2: store drop priority in mbuf vanshika.shukla
2024-10-14 12:01 ` [v3 40/43] net/dpaa2: add API to get endpoint name vanshika.shukla
2024-10-14 12:01 ` [v3 41/43] net/dpaa2: support VLAN traffic splitting vanshika.shukla
2024-10-14 12:01 ` [v3 42/43] net/dpaa2: add support for C-VLAN and MAC vanshika.shukla
2024-10-14 12:01 ` [v3 43/43] net/dpaa2: dpdmux single flow/multiple rules support vanshika.shukla
2024-10-15 2:32 ` Stephen Hemminger
2024-10-22 19:12 ` [v4 00/42] DPAA2 specific patches vanshika.shukla
2024-10-22 19:12 ` [v4 01/42] net/dpaa2: enhance Tx scatter-gather mempool vanshika.shukla
2024-10-22 19:12 ` [v4 02/42] net/dpaa2: support PTP packet one-step timestamp vanshika.shukla
2024-10-22 19:12 ` [v4 03/42] net/dpaa2: add proper MTU debugging print vanshika.shukla
2024-10-22 19:12 ` [v4 04/42] net/dpaa2: add support to dump dpdmux counters vanshika.shukla
2024-10-22 19:12 ` [v4 05/42] bus/fslmc: change dpcon close as internal symbol vanshika.shukla
2024-10-22 19:12 ` [v4 06/42] bus/fslmc: add close API to close DPAA2 device vanshika.shukla
2024-10-22 19:12 ` [v4 07/42] net/dpaa2: dpdmux: add support for CVLAN vanshika.shukla
2024-10-22 19:12 ` [v4 08/42] bus/fslmc: upgrade with MC version 10.37 vanshika.shukla
2024-10-22 19:12 ` [v4 09/42] net/dpaa2: support link state for eth interfaces vanshika.shukla
2024-10-22 19:12 ` [v4 10/42] net/dpaa2: update DPNI link status method vanshika.shukla
2024-10-22 19:12 ` [v4 11/42] net/dpaa2: add new PMD API to check dpaa platform version vanshika.shukla
2024-10-22 19:12 ` [v4 12/42] bus/fslmc: improve BMAN buffer acquire vanshika.shukla
2024-10-22 19:12 ` [v4 13/42] bus/fslmc: get MC VFIO group FD directly vanshika.shukla
2024-10-22 19:12 ` [v4 14/42] bus/fslmc: enhance MC VFIO multiprocess support vanshika.shukla
2024-10-22 19:12 ` [v4 15/42] bus/fslmc: free VFIO group FD in case of add group failure vanshika.shukla
2024-10-22 19:12 ` [v4 16/42] bus/fslmc: dynamic IOVA mode configuration vanshika.shukla
2024-10-23 1:02 ` Stephen Hemminger
2024-10-22 19:12 ` [v4 17/42] bus/fslmc: remove VFIO IRQ mapping vanshika.shukla
2024-10-22 19:12 ` [v4 18/42] bus/fslmc: create dpaa2 device with it's object vanshika.shukla
2024-10-22 19:12 ` [v4 19/42] bus/fslmc: fix coverity issue vanshika.shukla
2024-10-22 19:12 ` [v4 20/42] bus/fslmc: change qbman eq desc from d to desc vanshika.shukla
2024-10-22 19:12 ` [v4 21/42] bus/fslmc: introduce VFIO DMA mapping API for fslmc vanshika.shukla
2024-10-22 19:12 ` [v4 22/42] net/dpaa2: change miss flow ID macro name vanshika.shukla
2024-10-22 19:12 ` [v4 23/42] net/dpaa2: flow API refactor vanshika.shukla
2024-10-23 0:52 ` Stephen Hemminger
2024-10-23 12:04 ` Vanshika Shukla [this message]
2024-10-22 19:12 ` [v4 24/42] net/dpaa2: dump Rx parser result vanshika.shukla
2024-10-22 19:12 ` [v4 25/42] net/dpaa2: enhancement of raw flow extract vanshika.shukla
2024-10-22 19:12 ` [v4 26/42] net/dpaa2: frame attribute flags parser vanshika.shukla
2024-10-22 19:12 ` [v4 27/42] net/dpaa2: add VXLAN distribution support vanshika.shukla
2024-10-22 19:12 ` [v4 28/42] net/dpaa2: protocol inside tunnel distribution vanshika.shukla
2024-10-22 19:12 ` [v4 29/42] net/dpaa2: eCPRI support by parser result vanshika.shukla
2024-10-22 19:12 ` [v4 30/42] net/dpaa2: add GTP flow support vanshika.shukla
2024-10-22 19:12 ` [v4 31/42] net/dpaa2: check if Soft parser is loaded vanshika.shukla
2024-10-22 19:12 ` [v4 32/42] net/dpaa2: soft parser flow verification vanshika.shukla
2024-10-22 19:12 ` [v4 33/42] net/dpaa2: add flow support for IPsec AH and ESP vanshika.shukla
2024-10-22 19:12 ` [v4 34/42] net/dpaa2: fix memory corruption in TM vanshika.shukla
2024-10-22 19:12 ` [v4 35/42] net/dpaa2: support software taildrop vanshika.shukla
2024-10-22 19:12 ` [v4 36/42] net/dpaa2: check IOVA before sending MC command vanshika.shukla
2024-10-22 19:12 ` [v4 37/42] net/dpaa2: improve DPDMUX error behavior settings vanshika.shukla
2024-10-22 19:12 ` [v4 38/42] net/dpaa2: store drop priority in mbuf vanshika.shukla
2024-10-22 19:12 ` [v4 39/42] net/dpaa2: add API to get endpoint name vanshika.shukla
2024-10-22 19:12 ` [v4 40/42] net/dpaa2: support VLAN traffic splitting vanshika.shukla
2024-10-22 19:12 ` [v4 41/42] net/dpaa2: add support for C-VLAN and MAC vanshika.shukla
2024-10-22 19:12 ` [v4 42/42] net/dpaa2: dpdmux single flow/multiple rules support vanshika.shukla
2024-10-23 11:59 ` [v5 00/42] DPAA2 specific patches vanshika.shukla
2024-10-23 11:59 ` [v5 01/42] net/dpaa2: enhance Tx scatter-gather mempool vanshika.shukla
2024-10-23 11:59 ` [v5 02/42] net/dpaa2: support PTP packet one-step timestamp vanshika.shukla
2024-10-23 11:59 ` [v5 03/42] net/dpaa2: add proper MTU debugging print vanshika.shukla
2024-10-23 11:59 ` [v5 04/42] net/dpaa2: add support to dump dpdmux counters vanshika.shukla
2024-10-23 11:59 ` [v5 05/42] bus/fslmc: change dpcon close as internal symbol vanshika.shukla
2024-10-23 11:59 ` [v5 06/42] bus/fslmc: add close API to close DPAA2 device vanshika.shukla
2024-10-23 11:59 ` [v5 07/42] net/dpaa2: dpdmux: add support for CVLAN vanshika.shukla
2024-10-23 11:59 ` [v5 08/42] bus/fslmc: upgrade with MC version 10.37 vanshika.shukla
2024-10-23 11:59 ` [v5 09/42] net/dpaa2: support link state for eth interfaces vanshika.shukla
2024-10-23 11:59 ` [v5 10/42] net/dpaa2: update DPNI link status method vanshika.shukla
2024-10-23 11:59 ` [v5 11/42] net/dpaa2: add new PMD API to check dpaa platform version vanshika.shukla
2024-10-23 11:59 ` [v5 12/42] bus/fslmc: improve BMAN buffer acquire vanshika.shukla
2024-10-23 11:59 ` [v5 13/42] bus/fslmc: get MC VFIO group FD directly vanshika.shukla
2024-10-23 11:59 ` [v5 14/42] bus/fslmc: enhance MC VFIO multiprocess support vanshika.shukla
2024-10-23 11:59 ` [v5 15/42] bus/fslmc: free VFIO group FD in case of add group failure vanshika.shukla
2024-10-23 11:59 ` [v5 16/42] bus/fslmc: dynamic IOVA mode configuration vanshika.shukla
2024-10-23 11:59 ` [v5 17/42] bus/fslmc: remove VFIO IRQ mapping vanshika.shukla
2024-10-23 11:59 ` [v5 18/42] bus/fslmc: create dpaa2 device with it's object vanshika.shukla
2024-10-23 11:59 ` [v5 19/42] bus/fslmc: fix coverity issue vanshika.shukla
2024-10-23 11:59 ` [v5 20/42] bus/fslmc: change qbman eq desc from d to desc vanshika.shukla
2024-10-23 11:59 ` [v5 21/42] bus/fslmc: introduce VFIO DMA mapping API for fslmc vanshika.shukla
2024-10-23 11:59 ` [v5 22/42] net/dpaa2: change miss flow ID macro name vanshika.shukla
2024-10-23 11:59 ` [v5 23/42] net/dpaa2: flow API refactor vanshika.shukla
2024-10-23 11:59 ` [v5 24/42] net/dpaa2: dump Rx parser result vanshika.shukla
2024-10-23 11:59 ` [v5 25/42] net/dpaa2: enhancement of raw flow extract vanshika.shukla
2024-10-23 11:59 ` [v5 26/42] net/dpaa2: frame attribute flags parser vanshika.shukla
2024-10-23 11:59 ` [v5 27/42] net/dpaa2: add VXLAN distribution support vanshika.shukla
2024-10-23 11:59 ` [v5 28/42] net/dpaa2: protocol inside tunnel distribution vanshika.shukla
2024-10-23 11:59 ` [v5 29/42] net/dpaa2: eCPRI support by parser result vanshika.shukla
2024-10-23 11:59 ` [v5 30/42] net/dpaa2: add GTP flow support vanshika.shukla
2024-10-23 11:59 ` [v5 31/42] net/dpaa2: check if Soft parser is loaded vanshika.shukla
2024-10-23 11:59 ` [v5 32/42] net/dpaa2: soft parser flow verification vanshika.shukla
2024-10-23 11:59 ` [v5 33/42] net/dpaa2: add flow support for IPsec AH and ESP vanshika.shukla
2024-10-23 11:59 ` [v5 34/42] net/dpaa2: fix memory corruption in TM vanshika.shukla
2024-10-23 11:59 ` [v5 35/42] net/dpaa2: support software taildrop vanshika.shukla
2024-10-23 11:59 ` [v5 36/42] net/dpaa2: check IOVA before sending MC command vanshika.shukla
2024-10-23 11:59 ` [v5 37/42] net/dpaa2: improve DPDMUX error behavior settings vanshika.shukla
2024-10-23 11:59 ` [v5 38/42] net/dpaa2: store drop priority in mbuf vanshika.shukla
2024-10-23 11:59 ` [v5 39/42] net/dpaa2: add API to get endpoint name vanshika.shukla
2024-10-23 11:59 ` [v5 40/42] net/dpaa2: support VLAN traffic splitting vanshika.shukla
2024-10-23 11:59 ` [v5 41/42] net/dpaa2: add support for C-VLAN and MAC vanshika.shukla
2024-10-23 11:59 ` [v5 42/42] net/dpaa2: dpdmux single flow/multiple rules support vanshika.shukla
2024-09-18 7:50 ` [v2 02/43] net/dpaa2: support PTP packet one-step timestamp vanshika.shukla
2024-09-18 7:50 ` [v2 03/43] net/dpaa2: add proper MTU debugging print vanshika.shukla
2024-09-18 7:50 ` [v2 04/43] net/dpaa2: add support to dump dpdmux counters vanshika.shukla
2024-09-18 7:50 ` [v2 05/43] bus/fslmc: change dpcon close as internal symbol vanshika.shukla
2024-09-18 7:50 ` [v2 06/43] bus/fslmc: add close API to close DPAA2 device vanshika.shukla
2024-09-18 7:50 ` [v2 07/43] net/dpaa2: dpdmux: add support for CVLAN vanshika.shukla
2024-09-18 7:50 ` [v2 08/43] bus/fslmc: upgrade with MC version 10.37 vanshika.shukla
2024-09-18 7:50 ` [v2 09/43] net/dpaa2: support link state for eth interfaces vanshika.shukla
2024-09-18 7:50 ` [v2 10/43] net/dpaa2: update DPNI link status method vanshika.shukla
2024-09-18 7:50 ` [v2 11/43] net/dpaa2: add new PMD API to check dpaa platform version vanshika.shukla
2024-09-18 7:50 ` [v2 12/43] bus/fslmc: improve BMAN buffer acquire vanshika.shukla
2024-09-18 7:50 ` [v2 13/43] bus/fslmc: get MC VFIO group FD directly vanshika.shukla
2024-09-18 7:50 ` [v2 14/43] bus/fslmc: enhance MC VFIO multiprocess support vanshika.shukla
2024-09-18 7:50 ` [v2 15/43] bus/fslmc: free VFIO group FD in case of add group failure vanshika.shukla
2024-09-18 7:50 ` [v2 16/43] bus/fslmc: dynamic IOVA mode configuration vanshika.shukla
2024-09-18 7:50 ` [v2 17/43] bus/fslmc: remove VFIO IRQ mapping vanshika.shukla
2024-09-18 7:50 ` [v2 18/43] bus/fslmc: create dpaa2 device with it's object vanshika.shukla
2024-09-18 7:50 ` [v2 19/43] bus/fslmc: fix coverity issue vanshika.shukla
2024-09-18 7:50 ` [v2 20/43] bus/fslmc: fix invalid error FD code vanshika.shukla
2024-09-18 7:50 ` [v2 21/43] bus/fslmc: change qbman eq desc from d to desc vanshika.shukla
2024-09-18 7:50 ` [v2 22/43] bus/fslmc: introduce VFIO DMA mapping API for fslmc vanshika.shukla
2024-09-18 7:50 ` [v2 23/43] net/dpaa2: change miss flow ID macro name vanshika.shukla
2024-09-18 7:50 ` [v2 24/43] net/dpaa2: flow API refactor vanshika.shukla
2024-09-18 7:50 ` [v2 25/43] net/dpaa2: dump Rx parser result vanshika.shukla
2024-09-18 7:50 ` [v2 26/43] net/dpaa2: enhancement of raw flow extract vanshika.shukla
2024-09-18 7:50 ` [v2 27/43] net/dpaa2: frame attribute flags parser vanshika.shukla
2024-09-18 7:50 ` [v2 28/43] net/dpaa2: add VXLAN distribution support vanshika.shukla
2024-09-18 7:50 ` [v2 29/43] net/dpaa2: protocol inside tunnel distribution vanshika.shukla
2024-09-18 7:50 ` [v2 30/43] net/dpaa2: eCPRI support by parser result vanshika.shukla
2024-09-18 7:50 ` [v2 31/43] net/dpaa2: add GTP flow support vanshika.shukla
2024-09-18 7:50 ` [v2 32/43] net/dpaa2: check if Soft parser is loaded vanshika.shukla
2024-09-18 7:50 ` [v2 33/43] net/dpaa2: soft parser flow verification vanshika.shukla
2024-09-18 7:50 ` [v2 34/43] net/dpaa2: add flow support for IPsec AH and ESP vanshika.shukla
2024-09-18 7:50 ` [v2 35/43] net/dpaa2: fix memory corruption in TM vanshika.shukla
2024-09-18 7:50 ` [v2 36/43] net/dpaa2: support software taildrop vanshika.shukla
2024-09-18 7:50 ` [v2 37/43] net/dpaa2: check IOVA before sending MC command vanshika.shukla
2024-09-18 7:50 ` [v2 38/43] net/dpaa2: improve DPDMUX error behavior settings vanshika.shukla
2024-09-18 7:50 ` [v2 39/43] net/dpaa2: store drop priority in mbuf vanshika.shukla
2024-09-18 7:50 ` [v2 40/43] net/dpaa2: add API to get endpoint name vanshika.shukla
2024-09-18 7:50 ` [v2 41/43] net/dpaa2: support VLAN traffic splitting vanshika.shukla
2024-09-18 7:50 ` [v2 42/43] net/dpaa2: add support for C-VLAN and MAC vanshika.shukla
2024-09-18 7:50 ` [v2 43/43] net/dpaa2: dpdmux single flow/multiple rules support vanshika.shukla
2024-10-10 2:54 ` [v2 00/43] DPAA2 specific patches Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=AS8PR04MB8979D4CCF7EC19F2F9D4E777F44D2@AS8PR04MB8979.eurprd04.prod.outlook.com \
--to=vanshika.shukla@nxp.com \
--cc=dev@dpdk.org \
--cc=hemant.agrawal@nxp.com \
--cc=jun.yang@nxp.com \
--cc=sachin.saxena@nxp.com \
--cc=stephen@networkplumber.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).