From: "Li, Xiaoyun" <xiaoyun.li@intel.com>
To: "Wu, Jingjing" <jingjing.wu@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>, "stable@dpdk.org" <stable@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v2] net/i40e: fix PF notify issue when VF not up
Date: Fri, 28 Jul 2017 07:06:15 +0000 [thread overview]
Message-ID: <B9E724F4CB7543449049E7AE7669D82F42BA53@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <9BB6961774997848B5B42BEC655768F810DD77C3@SHSMSX103.ccr.corp.intel.com>
1. At first, I add vs state modification as follows, but it will show a warning when I check the patch.
The warning says that usually the else after return or break would not be executed.
if (i >= VFRESET_MAX_WAIT_CNT) {
PMD_DRV_LOG(ERR, "VF reset timeout");
return -ETIMEDOUT;
} else
vf->state = I40E_VF_ACTIVE;
2. Does it mean if vf state isn't inactive, the function will do "ret = i40e_aq_send_msg_to_vf();" and following statements ?
-----Original Message-----
From: Wu, Jingjing
Sent: Friday, July 28, 2017 14:53
To: Li, Xiaoyun <xiaoyun.li@intel.com>
Cc: dev@dpdk.org; stable@dpdk.org
Subject: RE: [PATCH v2] net/i40e: fix PF notify issue when VF not up
> -----Original Message-----
> From: Li, Xiaoyun
> Sent: Friday, July 28, 2017 7:40 PM
> To: Wu, Jingjing <jingjing.wu@intel.com>
> Cc: dev@dpdk.org; Li, Xiaoyun <xiaoyun.li@intel.com>; stable@dpdk.org
> Subject: [PATCH v2] net/i40e: fix PF notify issue when VF not up
>
> This patch modifies PF notify error to warning when not starting up VF
> and modifies VF state to active when VF reset is completed.
>
> Fixes: 4861cde46116 ("i40e: new poll mode driver")
> Cc: stable@dpdk.org
>
> Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
> ---
> v2 changes:
> * add VF state modification when VF reset is done.
> ---
> drivers/net/i40e/i40e_pf.c | 33 +++++++++++++++++++--------------
> 1 file changed, 19 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/net/i40e/i40e_pf.c b/drivers/net/i40e/i40e_pf.c
> index b4cf57f..5d5d24a 100644
> --- a/drivers/net/i40e/i40e_pf.c
> +++ b/drivers/net/i40e/i40e_pf.c
> @@ -152,22 +152,23 @@ i40e_pf_host_vf_reset(struct i40e_pf_vf *vf, bool do_hw_reset)
> val |= I40E_VPGEN_VFRTRIG_VFSWR_MASK;
> I40E_WRITE_REG(hw, I40E_VPGEN_VFRTRIG(vf_id), val);
> I40E_WRITE_FLUSH(hw);
> - }
>
> #define VFRESET_MAX_WAIT_CNT 100
> - /* Wait until VF reset is done */
> - for (i = 0; i < VFRESET_MAX_WAIT_CNT; i++) {
> - rte_delay_us(10);
> - val = I40E_READ_REG(hw, I40E_VPGEN_VFRSTAT(vf_id));
> - if (val & I40E_VPGEN_VFRSTAT_VFRD_MASK)
> - break;
> - }
> + /* Wait until VF reset is done */
> + for (i = 0; i < VFRESET_MAX_WAIT_CNT; i++) {
> + rte_delay_us(10);
> + val = I40E_READ_REG(hw, I40E_VPGEN_VFRSTAT(vf_id));
> + if (val & I40E_VPGEN_VFRSTAT_VFRD_MASK) {
> + vf->state = I40E_VF_ACTIVE;
> + break;
> + }
> + }
>
> - if (i >= VFRESET_MAX_WAIT_CNT) {
> - PMD_DRV_LOG(ERR, "VF reset timeout");
> - return -ETIMEDOUT;
> + if (i >= VFRESET_MAX_WAIT_CNT) {
> + PMD_DRV_LOG(ERR, "VF reset timeout");
> + return -ETIMEDOUT;
> + }
It's much clearer to add "vf->state = I40E_VF_ACTIVE;" here but not above.
> }
> -
> /* This is not first time to do reset, do cleanup job first */
> if (vf->vsi) {
> /* Disable queues */
> @@ -267,8 +268,12 @@ i40e_pf_host_send_msg_to_vf(struct i40e_pf_vf *vf,
> ret = i40e_aq_send_msg_to_vf(hw, abs_vf_id, opcode, retval,
> msg, msglen, NULL);
> if (ret) {
> - PMD_INIT_LOG(ERR, "Fail to send message to VF, err %u",
> - hw->aq.asq_last_status);
> + if (vf->state == I40E_VF_INACTIVE)
> + PMD_DRV_LOG(WARNING, "Warning! VF %u is inactive now!",
> + abs_vf_id);
How about just don't send msg to inactive VF but not print warning?
> + else
> + PMD_INIT_LOG(ERR, "Fail to send message to VF, err %u",
> + hw->aq.asq_last_status);
> }
>
> return ret;
> --
> 2.7.4
next prev parent reply other threads:[~2017-07-28 7:06 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-24 18:42 [dpdk-dev] [PATCH] " Xiaoyun Li
2017-07-26 6:14 ` Yang, Qiming
2017-07-28 11:39 ` [dpdk-dev] [PATCH v2] " Xiaoyun Li
2017-07-28 6:52 ` Wu, Jingjing
2017-07-28 7:06 ` Li, Xiaoyun [this message]
2017-07-28 15:48 ` [dpdk-dev] [PATCH v3] " Xiaoyun Li
2017-07-31 2:50 ` Wu, Jingjing
2017-07-31 14:41 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=B9E724F4CB7543449049E7AE7669D82F42BA53@SHSMSX101.ccr.corp.intel.com \
--to=xiaoyun.li@intel.com \
--cc=dev@dpdk.org \
--cc=jingjing.wu@intel.com \
--cc=stable@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).