DPDK patches and discussions
 help / color / mirror / Atom feed
From: "Yang, Qiming" <qiming.yang@intel.com>
To: "Zhang, AlvinX" <alvinx.zhang@intel.com>, "Guo, Jia" <jia.guo@intel.com>
Cc: "Xing, Beilei" <beilei.xing@intel.com>,
	"dev@dpdk.org" <dev@dpdk.org>,
	"Zhang, AlvinX" <alvinx.zhang@intel.com>,
	"stable@dpdk.org" <stable@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v5] net/i40e: fix modify the number of qps in VF
Date: Thu, 16 Jul 2020 04:57:51 +0000	[thread overview]
Message-ID: <BN6PR11MB00175695B7AE48E286633EAFE57F0@BN6PR11MB0017.namprd11.prod.outlook.com> (raw)
In-Reply-To: <20200716042407.14328-1-alvinx.zhang@intel.com>



> -----Original Message-----
> From: dev <dev-bounces@dpdk.org> On Behalf Of alvinx.zhang@intel.com
> Sent: Thursday, July 16, 2020 12:24
> To: Guo, Jia <jia.guo@intel.com>
> Cc: Xing, Beilei <beilei.xing@intel.com>; dev@dpdk.org; Zhang, AlvinX
> <alvinx.zhang@intel.com>; stable@dpdk.org
> Subject: [dpdk-dev] [PATCH v5] net/i40e: fix modify the number of qps in VF

Fix and modify are all verbs, I think you want to fix the queue pair modify process.

> From: Alvin Zhang <alvinx.zhang@intel.com>
> 
> If a VF request PF to allocate more number of queue pairs, the PF will free
> the queue pairs which have been allocated and reset the VF. So, VF should
> stop to work until all the process is done. This patch modify the process of
> the request queue pairs. To improve efficiency and eliminate code
> redundancy, the promiscuous ops were also updated.
> 
> Fixes: c48eb308ed13 ("net/i40e: support VF request more queues")
> Cc: stable@dpdk.org
> 
> Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
> ---
> 
> V2: Update git log and modify codes according to comments.
> V3: All the code was refactored.
> V4, V5: Modify codes according to comments.
> ---
>  drivers/net/i40e/i40e_ethdev_vf.c | 104 ++++++++++++++++++++-----------
> -------
>  1 file changed, 54 insertions(+), 50 deletions(-)
> 
> diff --git a/drivers/net/i40e/i40e_ethdev_vf.c
> b/drivers/net/i40e/i40e_ethdev_vf.c
> index eca716a..69cab8e 100644
> --- a/drivers/net/i40e/i40e_ethdev_vf.c
> +++ b/drivers/net/i40e/i40e_ethdev_vf.c
> @@ -91,7 +91,8 @@ static int i40evf_vlan_filter_set(struct rte_eth_dev
> *dev,
>  				  uint16_t vlan_id, int on);
>  static int i40evf_vlan_offload_set(struct rte_eth_dev *dev, int mask);  static
> void i40evf_dev_close(struct rte_eth_dev *dev); -static int
> i40evf_dev_reset(struct rte_eth_dev *dev);
> +static int i40evf_dev_reset(struct rte_eth_dev *dev); static int
> +i40evf_check_vf_reset_done(struct rte_eth_dev *dev);
>  static int i40evf_dev_promiscuous_enable(struct rte_eth_dev *dev);  static
> int i40evf_dev_promiscuous_disable(struct rte_eth_dev *dev);  static int
> i40evf_dev_allmulticast_enable(struct rte_eth_dev *dev); @@ -519,10
> +520,19 @@ struct rte_i40evf_xstats_name_off {
> 
>  	err = i40evf_execute_vf_cmd(dev, &args);
> 
> -	if (err)
> +	if (err) {
>  		PMD_DRV_LOG(ERR, "fail to execute command "
>  			    "CONFIG_PROMISCUOUS_MODE");
> -	return err;
> +
> +		if (err == I40E_NOT_SUPPORTED)
> +			return -ENOTSUP;
> +
> +		return -EAGAIN;
> +	}
> +
> +	vf->promisc_unicast_enabled = enable_unicast;
> +	vf->promisc_multicast_enabled = enable_multicast;
> +	return 0;
>  }
> 
>  static int
> @@ -1081,12 +1091,28 @@ static int i40evf_dev_xstats_get(struct
> rte_eth_dev *dev,
>  	args.out_size = I40E_AQ_BUF_SZ;
> 
>  	rte_eal_alarm_cancel(i40evf_dev_alarm_handler, dev);
> +
>  	err = i40evf_execute_vf_cmd(dev, &args);
> -	if (err)
> +
> +	rte_eal_alarm_set(I40EVF_ALARM_INTERVAL,
> i40evf_dev_alarm_handler,
> +dev);
> +
> +	if (err != I40E_SUCCESS) {
>  		PMD_DRV_LOG(ERR, "fail to execute command
> OP_REQUEST_QUEUES");
> +		return err;
> +	}
> +
> +	/* The PF will issue a reset to the VF when change the number of
> +	 * queues. The PF will set I40E_VFGEN_RSTAT to COMPLETE first,
> then
> +	 * wait 10ms and set it to ACTIVE. In this duration, vf may not catch
> +	 * the moment that COMPLETE is set. So, for vf, we'll try to wait a
> +	 * long time.
> +	 */
> +	rte_delay_ms(100);
> +
> +	err = i40evf_check_vf_reset_done(dev);
> +	if (err)
> +		PMD_DRV_LOG(ERR, "VF is still resetting");
> 
> -	rte_eal_alarm_set(I40EVF_ALARM_INTERVAL,
> -			  i40evf_dev_alarm_handler, dev);
>  	return err;
>  }
> 
> @@ -1514,7 +1540,7 @@ static int i40evf_dev_xstats_get(struct rte_eth_dev
> *dev,
>  	hw->bus.device = pci_dev->addr.devid;
>  	hw->bus.func = pci_dev->addr.function;
>  	hw->hw_addr = (void *)pci_dev->mem_resource[0].addr;
> -	hw->adapter_stopped = 0;
> +	hw->adapter_stopped = 1;
>  	hw->adapter_closed = 0;
> 
>  	/* Pass the information to the rte_eth_dev_close() that it should
> also @@ -1610,7 +1636,20 @@ static int eth_i40evf_pci_remove(struct
> rte_pci_device *pci_dev)
>  	ad->tx_vec_allowed = true;
> 
>  	if (num_queue_pairs > vf->vsi_res->num_queue_pairs) {
> -		int ret = 0;
> +		struct i40e_hw *hw;
> +		int ret;
> +
> +		if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
> +			PMD_DRV_LOG(ERR,
> +				    "For secondary processes, change queue
> pairs is not supported!");
> +			return -ENOTSUP;
> +		}
> +
> +		hw  = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> +		if (!hw->adapter_stopped) {
> +			PMD_DRV_LOG(ERR, "Device must be stopped
> first!");
> +			return -EBUSY;
> +		}
> 
>  		PMD_DRV_LOG(INFO, "change queue pairs from %u to %u",
>  			    vf->vsi_res->num_queue_pairs,
> num_queue_pairs); @@ -2182,68 +2221,32 @@ static int
> eth_i40evf_pci_remove(struct rte_pci_device *pci_dev)
> i40evf_dev_promiscuous_enable(struct rte_eth_dev *dev)  {
>  	struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data-
> >dev_private);
> -	int ret;
> -
> -	ret = i40evf_config_promisc(dev, 1, vf->promisc_multicast_enabled);
> -	if (ret == 0)
> -		vf->promisc_unicast_enabled = TRUE;
> -	else if (ret == I40E_NOT_SUPPORTED)
> -		ret = -ENOTSUP;
> -	else
> -		ret = -EAGAIN;
> 
> -	return ret;
> +	return i40evf_config_promisc(dev, true,
> +vf->promisc_multicast_enabled);
>  }
> 
>  static int
>  i40evf_dev_promiscuous_disable(struct rte_eth_dev *dev)  {
>  	struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data-
> >dev_private);
> -	int ret;
> -
> -	ret = i40evf_config_promisc(dev, 0, vf->promisc_multicast_enabled);
> -	if (ret == 0)
> -		vf->promisc_unicast_enabled = FALSE;
> -	else if (ret == I40E_NOT_SUPPORTED)
> -		ret = -ENOTSUP;
> -	else
> -		ret = -EAGAIN;
> 
> -	return ret;
> +	return i40evf_config_promisc(dev, false,
> +vf->promisc_multicast_enabled);
>  }
> 
>  static int
>  i40evf_dev_allmulticast_enable(struct rte_eth_dev *dev)  {
>  	struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data-
> >dev_private);
> -	int ret;
> -
> -	ret = i40evf_config_promisc(dev, vf->promisc_unicast_enabled, 1);
> -	if (ret == 0)
> -		vf->promisc_multicast_enabled = TRUE;
> -	else if (ret == I40E_NOT_SUPPORTED)
> -		ret = -ENOTSUP;
> -	else
> -		ret = -EAGAIN;
> 
> -	return ret;
> +	return i40evf_config_promisc(dev, vf->promisc_unicast_enabled,
> true);
>  }
> 
>  static int
>  i40evf_dev_allmulticast_disable(struct rte_eth_dev *dev)  {
>  	struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data-
> >dev_private);
> -	int ret;
> -
> -	ret = i40evf_config_promisc(dev, vf->promisc_unicast_enabled, 0);
> -	if (ret == 0)
> -		vf->promisc_multicast_enabled = FALSE;
> -	else if (ret == I40E_NOT_SUPPORTED)
> -		ret = -ENOTSUP;
> -	else
> -		ret = -EAGAIN;
> 
> -	return ret;
> +	return i40evf_config_promisc(dev, vf->promisc_unicast_enabled,
> false);
>  }
> 
>  static int
> @@ -2365,8 +2368,9 @@ static int eth_i40evf_pci_remove(struct
> rte_pci_device *pci_dev)
>  	 * it is a workaround solution when work with kernel driver
>  	 * and it is not the normal way
>  	 */
> -	i40evf_dev_promiscuous_disable(dev);
> -	i40evf_dev_allmulticast_disable(dev);
> +	if (vf->promisc_unicast_enabled || vf->promisc_multicast_enabled)
> +		i40evf_config_promisc(dev, false, false);
> +
>  	rte_eal_alarm_cancel(i40evf_dev_alarm_handler, dev);
> 
>  	i40evf_reset_vf(dev);
> --
> 1.8.3.1


  reply	other threads:[~2020-07-16  4:57 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-10 12:07 [dpdk-dev] [PATCH] net/i40e: fix modifying the number of queues alvinx.zhang
2020-06-21 13:36 ` Jeff Guo
2020-06-29  3:16   ` Zhang, AlvinX
2020-06-30  3:13     ` Jeff Guo
2020-07-02  3:26 ` [dpdk-dev] [PATCH v2] net/i40e: fix modify the number of qps in VF alvinx.zhang
2020-07-15  7:28   ` [dpdk-dev] [PATCH v3] " alvinx.zhang
2020-07-15 10:17     ` Jeff Guo
2020-07-16  1:38       ` Zhang, AlvinX
2020-07-16  1:52     ` [dpdk-dev] [PATCH v4] " alvinx.zhang
2020-07-16  4:24       ` [dpdk-dev] [PATCH v5] " alvinx.zhang
2020-07-16  4:57         ` Yang, Qiming [this message]
2020-07-16  5:13           ` Zhang, AlvinX
2020-07-16  5:12         ` alvinx.zhang
2020-07-16  6:33           ` [dpdk-dev] [PATCH v5] net/i40e: fix qps configuration " alvinx.zhang
2020-07-16  7:30             ` Jeff Guo
2020-07-16  9:14               ` Zhang, Qi Z

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=BN6PR11MB00175695B7AE48E286633EAFE57F0@BN6PR11MB0017.namprd11.prod.outlook.com \
    --to=qiming.yang@intel.com \
    --cc=alvinx.zhang@intel.com \
    --cc=beilei.xing@intel.com \
    --cc=dev@dpdk.org \
    --cc=jia.guo@intel.com \
    --cc=stable@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).