From: "Trahe, Fiona" <fiona.trahe@intel.com>
To: Kevin Traynor <ktraynor@redhat.com>,
Julien Meunier <julien.meunier@nokia.com>,
"Yu, PingX" <pingx.yu@intel.com>,
"stable@dpdk.org" <stable@dpdk.org>,
"Kusztal, ArkadiuszX" <arkadiuszx.kusztal@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>,
Abhishek Marathe <Abhishek.Marathe@microsoft.com>,
Akhil Goyal <akhil.goyal@nxp.com>,
"Ali Alnubani" <alialnu@mellanox.com>,
"Walker, Benjamin" <benjamin.walker@intel.com>,
David Christensen <drc@linux.vnet.ibm.com>,
Hemant Agrawal <hemant.agrawal@nxp.com>,
"Stokes, Ian" <ian.stokes@intel.com>,
Jerin Jacob <jerinj@marvell.com>,
"Mcnamara, John" <john.mcnamara@intel.com>,
Ju-Hyoung Lee <juhlee@microsoft.com>,
"Luca Boccassi" <bluca@debian.org>,
Pei Zhang <pezhang@redhat.com>,
"Xu, Qian Q" <qian.q.xu@intel.com>,
Raslan Darawsheh <rasland@mellanox.com>,
"Thomas Monjalon" <thomas@monjalon.net>,
"Peng, Yuan" <yuan.peng@intel.com>,
"Chen, Zhaoyan" <zhaoyan.chen@intel.com>
Subject: Re: [dpdk-dev] 18.11.6 (LTS) patches review and test
Date: Thu, 9 Jan 2020 17:10:25 +0000 [thread overview]
Message-ID: <BN6PR11MB179603A5E8E08E4709823CDFE4390@BN6PR11MB1796.namprd11.prod.outlook.com> (raw)
In-Reply-To: <5edc09fb-8616-c4f6-c0e0-66074d227d5f@redhat.com>
Thank Julien and Kevin for investigating.
We'll investigate option 2 from Kevin's suggestions.
> -----Original Message-----
> From: Kevin Traynor <ktraynor@redhat.com>
> Sent: Thursday, January 9, 2020 2:18 PM
> To: Julien Meunier <julien.meunier@nokia.com>; Yu, PingX <pingx.yu@intel.com>; stable@dpdk.org;
> Trahe, Fiona <fiona.trahe@intel.com>
> Cc: dev@dpdk.org; Abhishek Marathe <Abhishek.Marathe@microsoft.com>; Akhil Goyal
> <akhil.goyal@nxp.com>; Ali Alnubani <alialnu@mellanox.com>; Walker, Benjamin
> <benjamin.walker@intel.com>; David Christensen <drc@linux.vnet.ibm.com>; Hemant Agrawal
> <hemant.agrawal@nxp.com>; Stokes, Ian <ian.stokes@intel.com>; Jerin Jacob <jerinj@marvell.com>;
> Mcnamara, John <john.mcnamara@intel.com>; Ju-Hyoung Lee <juhlee@microsoft.com>; Luca
> Boccassi <bluca@debian.org>; Pei Zhang <pezhang@redhat.com>; Xu, Qian Q <qian.q.xu@intel.com>;
> Raslan Darawsheh <rasland@mellanox.com>; Thomas Monjalon <thomas@monjalon.net>; Peng,
> Yuan <yuan.peng@intel.com>; Chen, Zhaoyan <zhaoyan.chen@intel.com>
> Subject: Re: 18.11.6 (LTS) patches review and test
>
> On 09/01/2020 08:30, Julien Meunier wrote:
> > Hi,
> >
>
> Hi Julien,
>
> > I launched UT on my target which has a QAT VF device, binded to igb_uio.
> >
> > + TestCase [97] : test_null_auth_only_operation failed
> > + TestCase [99] : test_null_cipher_auth_operation failed
> >
> > When I did some debug, I saw that the content of the digest is 0.
> >
> > If I revert ac0a49ed9258 ("crypto/qat: fix null auth when using VFIO"),
> > all tests are OK.
> >
> > This issue is not seen on master branch, because other UTs are executed
> > for QAT PMDs in order to check NULL algo. UTs were a reworked, see
> > af46a0bc0c5b ("test/crypto: add NULL algo to loop test mechanism")
> >
> > My commit does not seem to add any specific regression.
> >
>
> Great, thanks for investigating it, that helps a lot.
>
> @Fiona, I think the options we have are:
>
> 1. Revert 18.11 branch ac0a49ed9258 ("crypto/qat: fix null auth when
> using VFIO")
>
> 2. You could send a backport for af46a0bc0c5b ("test/crypto: add NULL
> algo to loop test mechanism") on 18.11 branch. It mostly applies but
> there are some conflicts and I can't test it.
>
> Only other option seems to be
> 3. Let the cryptodev_qat_autotest UT fail on 18.11.6.
>
> What do you think?
>
> thanks,
> Kevin.
>
> p.s. Damian's email bounced
>
> > Regards,
> >
> > On 08/01/2020 19:34, Kevin Traynor wrote:
> >> On 24/12/2019 10:07, Yu, PingX wrote:
> >>> Kevin,
> >>> Update the regression test result of Intel part. See the details as below.
> >>>
> >>
> >> Hi Yu Ping,
> >>
> >> thanks for the report and the log files.
> >>
> >>> # Basic Intel(R) NIC testing
> >>> * PF(i40e): Pass
> >>> * PF(ixgbe): Pass
> >>> * VF: Pass
> >>> * Build or compile: 2 bugs are found.
> >>> 1. [dpdk-stable 18.11.6-rc1] meson build failed on FreeBSD12.1(See freebsd 12.1.log.txt)
> >>
> >> I have a fix for this and another FreeBSD+meson issue that was hidden by
> >> this.
> >>
> >>> 2. [dpdk-stable 18.11.6-rc1] make build failed on fedora31.(See fedora31.log.txt)
> >>
> >> I have fixes for this and some other issues I found with clang 9.0 and
> >> gcc 9 on F31.
> >>
> >>> * Intel NIC single core/NIC performance: Pass
> >>>
> >>> #Basic cryptodev and virtio testing
> >>> * vhost/virtio basic loopback, PVP and performance test: Pass.
> >>> * cryptodev: 2 bugs are found.
> >>> 1. [dpdk-stable-18.11.6]Crypto: cryptodev_qat_autotest test failed. PS: issue passed on 18.11.3
> and 18.11.5.
> >>
> >> Looking at commits related to crypto/qat I see:
> >>
> >> commit f7a7842ebec33c9cda3f5aac119adea4ce4f6999
> >> Author: Hemant Agrawal <hemant.agrawal@nxp.com>
> >> Date: Wed Dec 18 10:15:27 2019 +0530
> >>
> >> test/crypto: fix session init failure for wireless case
> >>
> >> [ upstream commit 2967612f44b9726cb14242ae61658f2c944188d2 ]
> >>
> >> commit 2674667aac56448c8bd151bc082e64ef4c88b649
> >> Author: Arek Kusztal <arkadiuszx.kusztal@intel.com>
> >> Date: Tue Oct 22 16:22:25 2019 +0200
> >>
> >> crypto/qat: fix AES CMAC mininum digest size
> >>
> >> [ upstream commit a7f8087bbdbe9a69fdd0bbc77237dd3a2014ce71 ]
> >>
> >>
> >> commit ac0a49ed92588f961b1f5e659d27c70f078eea13
> >> Author: Damian Nowak <damianx.nowak@intel.com>
> >> Date: Fri Aug 9 11:29:01 2019 +0200
> >>
> >> crypto/qat: fix null auth when using VFIO
> >>
> >> [ upstream commit 65beb9abca6dbb2167a53ab31d79e03f0857357b ]
> >>
> >>
> >> commit cde0c9ce68d3a5975a57ef09a28252c44cfe4ac6
> >> Author: Fiona Trahe <fiona.trahe@intel.com>
> >> Date: Tue Sep 10 17:32:10 2019 +0100
> >>
> >> crypto/qat: fix digest length in XCBC capability
> >>
> >> [ upstream commit 0996ed0d5ad65b6419e3ce66a420199c3ed45ca9 ]
> >>
> >> commit 8db57afd7ab9a3c12d73f1f5461415690b8c173c
> >> Author: Julien Meunier <julien.meunier@nokia.com>
> >> Date: Wed Oct 16 13:21:11 2019 +0300
> >>
> >> cryptodev: fix checks related to device id
> >>
> >> [ upstream commit 3dd4435cf473f5d10b99282098821fb40b72380f ]
> >>
> >> commit 8dec9eab6ac4eca67cb8df2dcdd5a09eaf86bc8e
> >> Author: Julien Meunier <julien.meunier@nokia.com>
> >> Date: Wed Aug 7 11:39:23 2019 +0300
> >>
> >> cryptodev: fix initialization on multi-process
> >>
> >> [ upstream commit 1a60db7f354a52add0c1ea66e55ba7beba1a9716 ]
> >>
> >>> 2. [dpdk-stable-18.11.6]Crypto: cryptodev_aesni_mb_autotest. Fail on 18.11.2~18.11.6 with latest
> configuration.
> >>>
> >>
> >> As you can see from that, I don't think the UT were ever really stable
> >> and a lot of the stabilisation work came after 18.11. If the
> >> maintainers/authors (cc) want to investigate, I can take patches or
> >> revert if required. Otherwise, I won't investigate further or block the
> >> release on UT fails.
> >>
> >> thanks,
> >> Kevin.
> >>
> >>> Regards,
> >>> Yu Ping
> >>>
> >>>> -----Original Message-----
> >>>> From: Kevin Traynor [mailto:ktraynor@redhat.com]
> >>>> Sent: Wednesday, December 18, 2019 7:42 PM
> >>>> To: stable@dpdk.org
> >>>> Cc: dev@dpdk.org; Abhishek Marathe <Abhishek.Marathe@microsoft.com>;
> >>>> Akhil Goyal <akhil.goyal@nxp.com>; Ali Alnubani <alialnu@mellanox.com>;
> >>>> Walker, Benjamin <benjamin.walker@intel.com>; David Christensen
> >>>> <drc@linux.vnet.ibm.com>; Hemant Agrawal <hemant.agrawal@nxp.com>;
> >>>> Stokes, Ian <ian.stokes@intel.com>; Jerin Jacob <jerinj@marvell.com>;
> >>>> Mcnamara, John <john.mcnamara@intel.com>; Ju-Hyoung Lee
> >>>> <juhlee@microsoft.com>; Kevin Traynor <ktraynor@redhat.com>; Luca
> >>>> Boccassi <bluca@debian.org>; Pei Zhang <pezhang@redhat.com>; Yu, PingX
> >>>> <pingx.yu@intel.com>; Xu, Qian Q <qian.q.xu@intel.com>; Raslan Darawsheh
> >>>> <rasland@mellanox.com>; Thomas Monjalon <thomas@monjalon.net>; Peng,
> >>>> Yuan <yuan.peng@intel.com>; Chen, Zhaoyan <zhaoyan.chen@intel.com>
> >>>> Subject: 18.11.6 (LTS) patches review and test
> >>>>
> >>>> Hi all,
> >>>>
> >>>> Here is a list of patches targeted for LTS release 18.11.6.
> >>>>
> >>>> The planned date for the final release is 31st January.
> >>>>
> >>>> Please help with testing and validation of your use cases and report any
> >>>> issues/results with reply-all to this mail. For the final release the fixes and
> >>>> reported validations will be added to the release notes.
> >>>>
> >>>> A release candidate tarball can be found at:
> >>>>
> >>>> https://dpdk.org/browse/dpdk-stable/tag/?id=v18.11.6-rc1
> >>>>
> >>>> These patches are located at branch 18.11 of dpdk-stable repo:
> >>>> https://dpdk.org/browse/dpdk-stable/
> >>>>
> >>>> Thanks.
> >>>>
> >>>> Kevin.
> >>>>
> >>>> ---
> >>>> Aaron Conole (1):
> >>>> test/interrupt: account for race with callback
> >>>>
> >>>> Abhishek Sachan (1):
> >>>> net/af_packet: fix stale sockets
> >>>>
> >>>> Adrian Moreno (4):
> >>>> vhost: fix vring memory partially mapped
> >>>> vhost: translate incoming log address to GPA
> >>>> vhost: prevent zero copy mode if IOMMU is on
> >>>> vhost: convert buffer addresses to GPA for logging
> >>>>
> >>>> Ajit Khaparde (9):
> >>>> net/bnxt: fix setting max RSS contexts
> >>>> net/bnxt: fix writing MTU to FW
> >>>> net/bnxt: fix crash in xstats get
> >>>> net/bnxt: fix resource qcaps with older FW
> >>>> net/bnxt: fix async link handling and update
> >>>> net/bnxt: fix flow flush handling
> >>>> net/bnxt: update trusted VF status only when it changes
> >>>> net/bnxt: fix doorbell register offset for Tx ring
> >>>> net/bnxt: get default HWRM command timeout from FW
> >>>>
> >>>> Akhil Goyal (1):
> >>>> crypto/dpaa2_sec: fix length retrieved from hardware
> >>>>
> >>>> Ali Alnubani (2):
> >>>> mk: fix build on arm64
> >>>> eal: fix header file install with meson
> >>>>
> >>>> Alvin Zhang (1):
> >>>> net/i40e: fix exception with multi-driver
> >>>>
> >>>> Amaranath Somalapuram (5):
> >>>> doc: fix l2fwd-crypto usage in CCP guide
> >>>> crypto/ccp: fix maximum queues and burst size
> >>>> crypto/ccp: fix CPU authentication crash
> >>>> crypto/ccp: fix scheduling of burst
> >>>> crypto/ccp: fix digest size capabilities
> >>>>
> >>>> Anatoly Burakov (2):
> >>>> mempool: use actual IOVA addresses when populating
> >>>> common/octeontx: add missing public symbol
> >>>>
> >>>> Andrew Rybchenko (5):
> >>>> ethdev: fix doc reference to FDIR disabled mode
> >>>> ethdev: remove redundant device info cleanup before get
> >>>> net/sfc: fix missing notification on link status change
> >>>> net/virtio: reject unsupported Tx multi-queue modes
> >>>> ethdev: avoid undefined behaviour on configuration copy
> >>>>
> >>>> Andrzej Ostruszka (4):
> >>>> doc: fix description of versioning macros
> >>>> eventdev: fix possible use of uninitialized var
> >>>> doc: fix tap guide
> >>>> net/dpaa2: fix possible use of uninitialized vars
> >>>>
> >>>> Anoob Joseph (1):
> >>>> examples/ipsec-secgw: fix access to freed packet
> >>>>
> >>>> Archana Muniganti (1):
> >>>> app/crypto-perf: fix input of AEAD decrypt
> >>>>
> >>>> Arek Kusztal (1):
> >>>> crypto/qat: fix AES CMAC mininum digest size
> >>>>
> >>>> Bernard Iremonger (1):
> >>>> examples/ipsec-secgw: fix unchecked return value
> >>>>
> >>>> Bruce Richardson (4):
> >>>> examples/vm_power: fix type of cmdline token in cli
> >>>> port: fix pcap support with meson
> >>>> examples: hide error for missing pkg-config path flag
> >>>> usertools: fix typo in SPDX tag of telemetry script
> >>>>
> >>>> Chaitanya Babu Talluri (1):
> >>>> examples/fips_validation: fix null dereferences
> >>>>
> >>>> Christian Ehrhardt (2):
> >>>> net/mlx4: fix build on ppc64
> >>>> build: avoid overlinking
> >>>>
> >>>> Ciara Power (3):
> >>>> app/testpmd: fix help for loop topology option
> >>>> ethdev: fix include of ethernet header file
> >>>> app/procinfo: use strlcpy for copying string
> >>>>
> >>>> Congwen Zhang (2):
> >>>> net/ixgbe: fix zeroing of RSS config
> >>>> net/e1000: fix zeroing of RSS config
> >>>>
> >>>> Damian Nowak (1):
> >>>> crypto/qat: fix null auth when using VFIO
> >>>>
> >>>> David Christensen (3):
> >>>> eal/ppc: fix 64-bit atomic exchange operation
> >>>> eal/linux: restore specific hugepage ordering for ppc
> >>>> vhost: fix build on RHEL 7.6 for Power
> >>>>
> >>>> David Hunt (2):
> >>>> examples/vm_power: fix build without i40e
> >>>> examples/vm_power: fix OOB frequency oscillations
> >>>>
> >>>> David Marchand (15):
> >>>> net/bonding: fix out of bound access in LACP mode
> >>>> net/bonding: fix LACP fast queue Rx handler
> >>>> net/bonding: fix unicast packets filtering
> >>>> ci: add missing dependencies for documentation
> >>>> net/qede: limit Rx ring index read for debug
> >>>> devtools: fix cleanup of checkpatch temporary file
> >>>> eal: remove dead code on NUMA node detection
> >>>> net/mlx4: remove dependency on libmnl in meson
> >>>> net/bonding: use non deprecated PCI API
> >>>> doc: fix internal links for older releases
> >>>> doc: fix link to AESNI mb external library
> >>>> doc/guides: clean repeated words
> >>>> build: remove unneeded meson option
> >>>> app/testpmd: report invalid command line parameter
> >>>> buildtools: fix build with coverage
> >>>>
> >>>> Dekel Peled (2):
> >>>> doc: fix description of links to EAL options pages
> >>>> net/mlx5: fix check of RSS queue index
> >>>>
> >>>> Dilshod Urazov (3):
> >>>> net/virtio: reject deferred Rx start
> >>>> net/virtio: reject deferred Tx start
> >>>> net/virtio: reject unsupported Rx multi-queue modes
> >>>>
> >>>> Eelco Chaudron (1):
> >>>> net/i40e: downgrade error log
> >>>>
> >>>> Fan Zhang (2):
> >>>> doc: fix AESNI-GCM limitations in crypto guide
> >>>> examples/fips_validation: fix auth verify
> >>>>
> >>>> Ferruh Yigit (7):
> >>>> bus/fslmc: fix global variable multiple definitions
> >>>> net/igb: fix global variable multiple definitions
> >>>> crypto/null: fix global variable multiple definitions
> >>>> crypto/virtio: fix global variable multiple definitions
> >>>> compress/octeontx: fix global variable multiple definitions
> >>>> test: fix global variable multiple definitions
> >>>> mk: remove library search path from binary
> >>>>
> >>>> Fiona Trahe (1):
> >>>> crypto/qat: fix digest length in XCBC capability
> >>>>
> >>>> Flavia Musatescu (2):
> >>>> app/testpmd: remove duplicated Rx offload commands
> >>>> net/af_packet: improve Tx statistics accuracy
> >>>>
> >>>> Flavio Leitner (1):
> >>>> vhost: fix IPv4 checksum
> >>>>
> >>>> Gagandeep Singh (1):
> >>>> net/enetc: fix BD ring alignment
> >>>>
> >>>> Gage Eads (1):
> >>>> event/sw: fix xstats reset value
> >>>>
> >>>> Gavin Hu (5):
> >>>> net/i40e: remove memory barrier from NEON Rx
> >>>> net/i40e: remove compiler barrier from NEON Rx
> >>>> net/bnxt: remove duplicate barrier
> >>>> net/bnxt: replace memory barrier for doorbell response
> >>>> net/bnxt: enforce IO barrier for doorbell command
> >>>>
> >>>> Guinan Sun (1):
> >>>> net/ixgbe: fix MACsec setting
> >>>>
> >>>> Harry van Haaren (1):
> >>>> test/service: fix wait for service core
> >>>>
> >>>> Hemant Agrawal (3):
> >>>> event/dpaa2: fix default queue configuration
> >>>> bus/dpaa: fix dpaa_sec blacklist
> >>>> test/crypto: fix session init failure for wireless case
> >>>>
> >>>> Honnappa Nagarahalli (1):
> >>>> test/lpm: fix measured cycles for delete
> >>>>
> >>>> Hui Zhao (2):
> >>>> net/bonding: fix slave id types
> >>>> net/bonding: fix OOB access in other aggregator modes
> >>>>
> >>>> Hyong Youb Kim (3):
> >>>> net/enic: fix probe for secondary process
> >>>> net/enic: fix crash in secondary process
> >>>> net/enic: re-enable link status change interrupt
> >>>>
> >>>> Igor Romanov (1):
> >>>> net/bonding: fix link speed update in broadcast mode
> >>>>
> >>>> Ivan Ilchenko (1):
> >>>> net/atlantic: remove double function declaration
> >>>>
> >>>> Ivan Malov (1):
> >>>> net/sfc: fix adapter lock usage on rule creation
> >>>>
> >>>> Jim Harris (1):
> >>>> vfio: fix leak with multiprocess
> >>>>
> >>>> Jin Yu (1):
> >>>> vhost: fix build dependency on hash lib
> >>>>
> >>>> Joyce Kong (3):
> >>>> net/i40e: fix address of first segment
> >>>> net/ixgbe: fix address of first segment
> >>>> doc: update arm64 cross build tool version
> >>>>
> >>>> Julien Meunier (2):
> >>>> cryptodev: fix initialization on multi-process
> >>>> cryptodev: fix checks related to device id
> >>>>
> >>>> Junyu Jiang (2):
> >>>> net/ixgbe: fix queue interrupt for X552/557
> >>>> net/bonding: fix port ID check
> >>>>
> >>>> Kalesh AP (18):
> >>>> net/bnxt: fix accessing variable before null check
> >>>> net/bnxt: fix multicast filter programming
> >>>> net/bnxt: return error if setting link up fails
> >>>> net/bnxt: remove unnecessary variable assignment
> >>>> net/bnxt: fix dereference before null check
> >>>> net/bnxt: cleanup comments
> >>>> net/bnxt: fix L4 checksum indication in non-vector Rx
> >>>> net/bnxt: fix IP checksum error indication
> >>>> net/bnxt: fix setting default MAC address
> >>>> net/bnxt: fix error checking of FW commands
> >>>> net/bnxt: fix check of address mapping
> >>>> net/bnxt: fix stats errors handling
> >>>> net/bnxt: move macro definitions to header file
> >>>> net/bnxt: fix extended port counter statistics
> >>>> net/bnxt: fix VF probe when MAC address is zero
> >>>> net/bnxt: fix coding style
> >>>> net/bnxt: fix deferred start of Tx queues
> >>>> net/bnxt: fix rx queue start/stop
> >>>>
> >>>> Kevin Traynor (6):
> >>>> common/cpt: fix possible null dereference
> >>>> compress/octeontx: remove commented out code
> >>>> event/opdl: remove commented out code
> >>>> net/bnxt: remove commented out code
> >>>> lib: fix log typos
> >>>> lib: fix doxygen typos
> >>>>
> >>>> Krzysztof Kanas (4):
> >>>> test/bonding: fix LSC related cases
> >>>> test/bonding: fix LSC timeout unit
> >>>> test: optimise fd closing in forks
> >>>> net/bonding: fix selection logic
> >>>>
> >>>> Lance Richardson (2):
> >>>> net/bnxt: advertise scatter Rx offload capability
> >>>> net/bnxt: fix mbuf free when clearing Tx queue
> >>>>
> >>>> Laurent Hardy (1):
> >>>> net/i40e: set speed to undefined for default case
> >>>>
> >>>> Lukasz Bartosik (1):
> >>>> examples/ipsec-secgw: fix default configuration
> >>>>
> >>>> Lunyuan Cui (3):
> >>>> net/e1000: fix link status update
> >>>> net/ixgbe: fix link status
> >>>> net/e1000: fix link status
> >>>>
> >>>> Marcin Hajkowski (1):
> >>>> power: fix socket indicator value
> >>>>
> >>>> Marcin Smoczynski (2):
> >>>> net/tap: fix blocked Rx packets
> >>>> examples/ipsec-secgw: fix GCM IV length
> >>>>
> >>>> Marvin Liu (3):
> >>>> vhost: fix virtqueue not accessible
> >>>> vhost: do not limit packed ring size
> >>>> net/virtio-user: fix setting filters
> >>>>
> >>>> Matan Azrad (3):
> >>>> ethdev: fix item expansion for RSS flow
> >>>> ethdev: fix last item detection on RSS flow expand
> >>>> app/testpmd: fix invalid port detaching
> >>>>
> >>>> Mattias Rönnblom (1):
> >>>> power: handle frequency increase with turbo disabled
> >>>>
> >>>> Maxime Coquelin (6):
> >>>> vhost: batch used descs chains write-back with packed ring
> >>>> vhost: un-inline dirty pages logging functions
> >>>> vhost: do not inline packed and split functions
> >>>> vhost: do not inline unlikely fragmented buffers code
> >>>> vhost: simplify descriptor buffer prefetching
> >>>> eal/x86: force inlining of all memcpy and mov helpers
> >>>>
> >>>> Maxime Leroy (1):
> >>>> net/vmxnet3: remove IP checksum from capabilities
> >>>>
> >>>> Michal Krawczyk (1):
> >>>> vfio: fix truncated BAR offset for 32-bit
> >>>>
> >>>> Nipun Gupta (5):
> >>>> event/dpaa: fix number of supported atomic flows
> >>>> common/dpaax: fallback to check separate memory node for VM
> >>>> net/dpaa2: add retry and timeout in packet enqueue API
> >>>> raw/dpaa2_cmdif: add retry and timeout in packet enqueue API
> >>>> net/dpaa2: set port in mbuf
> >>>>
> >>>> Nithin Dabilpuram (2):
> >>>> eal: add ack interrupt API
> >>>> net/qede: use ack in interrupt handlers
> >>>>
> >>>> Noa Ezra (1):
> >>>> net/vhost: fix redundant queue state event
> >>>>
> >>>> Pallantla Poornima (1):
> >>>> net/axgbe: fix double unlock
> >>>>
> >>>> Pavan Nikhilesh (4):
> >>>> reciprocal: fix off-by-one with 32-bit divisor
> >>>> app/eventdev: fix divide by zero
> >>>> app/eventdev: check function errors
> >>>> event/octeontx: fix partial Rx packet handling
> >>>>
> >>>> Pavel Belous (1):
> >>>> net/atlantic: add FW mailbox guard mutex
> >>>>
> >>>> Peng Huang (1):
> >>>> app/testpmd: fix Tx checksum when TSO enabled
> >>>>
> >>>> Phil Yang (1):
> >>>> net/mlx5: fix Rx CQ doorbell synchronization on aarch64
> >>>>
> >>>> Radu Nicolau (1):
> >>>> security: fix doxygen fields
> >>>>
> >>>> Rahul Gupta (1):
> >>>> net/bnxt: fix Rx queue count
> >>>>
> >>>> Rahul Lakkireddy (7):
> >>>> net/cxgbe: add prefix to global functions
> >>>> net/cxgbe: fix null access when allocating CLIP entry
> >>>> net/cxgbe: fix slot allocation for IPv6 flows
> >>>> net/cxgbe: fix parsing VLAN ID rewrite action
> >>>> net/cxgbe: fix prefetch for non-coalesced Tx packets
> >>>> net/cxgbe: avoid polling link status before device start
> >>>> net/cxgbe: fix races on flow API operations
> >>>>
> >>>> Rasesh Mody (1):
> >>>> net/qede/base: fix page index for PBL chains
> >>>>
> >>>> Raslan Darawsheh (1):
> >>>> net/mlx: fix debug build with icc
> >>>>
> >>>> Robin Jarry (2):
> >>>> usertools: fix pmdinfo with python 3 and pyelftools>=0.24
> >>>> usertools: fix telemetry client with python 3
> >>>>
> >>>> Ruifeng Wang (4):
> >>>> net/ixgbe: remove memory barrier from NEON Rx
> >>>> lib/distributor: fix deadlock on aarch64
> >>>> test/distributor: fix spurious failure
> >>>> net/ixgbe: support packet type with NEON
> >>>>
> >>>> Sachin Saxena (1):
> >>>> net/dpaa2: fix Rx offload flags on jumbo MTU set
> >>>>
> >>>> Santoshkumar Karanappa Rastapur (5):
> >>>> net/bnxt: fix flow steering
> >>>> net/bnxt: fix ping with MTU change
> >>>> net/bnxt: fix MAC/VLAN filter allocation
> >>>> net/bnxt: fix forwarding with higher mbuf size
> >>>> net/bnxt: fix crash after removing and adding slaves
> >>>>
> >>>> Seth Howell (1):
> >>>> bus/pci: remove useless link dependency on ethdev
> >>>>
> >>>> Shahed Shaikh (6):
> >>>> net/qede: refactor Rx and Tx queue setup
> >>>> net/qede: fix odd number of queues usage in 100G mode
> >>>> net/qede: fix RSS configuration as per new allocation method
> >>>> net/qede: fix stats flow as per new allocation method
> >>>> net/qede: fix setting MTU
> >>>> net/qede: fix setting VLAN strip mode
> >>>>
> >>>> Shougang Wang (2):
> >>>> app/testpmd: fix crash on port reset
> >>>> net/ixgbe: fix performance drop caused by MACsec
> >>>>
> >>>> Shweta Choudaha (1):
> >>>> net/igb: fix PHY status if PHY reset is not blocked
> >>>>
> >>>> Somnath Kotur (1):
> >>>> net/bnxt: expose some missing counters in port stats
> >>>>
> >>>> Stephen Hemminger (7):
> >>>> bus/pci: fix Intel IOMMU sysfs access check
> >>>> service: use log for error messages
> >>>> test/mbuf: fix forged mbuf in clone test
> >>>> net/bnxt: fix debug log level
> >>>> app/testpmd: block xstats for hidden ports
> >>>> examples/multi_process: check server port validity
> >>>> examples/multi_process: fix client crash with sparse ports
> >>>>
> >>>> Thibaut Collet (2):
> >>>> net/virtio: fix Rx stats with vectorized functions
> >>>> net/virtio: get all pending Rx packets in vectorized paths
> >>>>
> >>>> Thierry Herbelot (5):
> >>>> crypto/dpaa_sec: fix IOVA table
> >>>> crypto/octeontx: enable unbinding
> >>>> drivers/crypto: remove some invalid comments
> >>>> doc: fix a common typo in NIC guides
> >>>> crypto/openssl: use local copy for session contexts
> >>>>
> >>>> Thomas Monjalon (5):
> >>>> build: remove redundant libs from pkgconfig
> >>>> net/mlx: fix meson build with custom dependency path
> >>>> net/mlx: fix build with make and recent gcc
> >>>> net/szedata2: fix dependency check
> >>>> ethdev: limit maximum number of queues
> >>>>
> >>>> Ting Xu (1):
> >>>> app/testpmd: fix CRC strip command
> >>>>
> >>>> Tiwei Bie (8):
> >>>> net/virtio: remove remaining simple Tx related stuff
> >>>> doc: fix typo in virtio in-order Rx function name
> >>>> doc: fix format in virtio guide
> >>>> vhost: fix slave request fd leak
> >>>> vhost: forbid reallocation when running
> >>>> vhost: fix vring address handling during live migration
> >>>> vhost: protect vring access done by application
> >>>> net/virtio-user: drop attribute unused for memory callback
> >>>>
> >>>> Vakul Garg (2):
> >>>> crypto/dpaa_sec: fix auth-cipher check for AEAD
> >>>> examples/ipsec-secgw: fix SHA256-HMAC digest length
> >>>>
> >>>> Viacheslav Ovsiienko (1):
> >>>> net/mlx5: fix BlueField VF type recognition
> >>>>
> >>>> Wangyu (Eric) (1):
> >>>> bus/pci: align next mapping address on page boundary
> >>>>
> >>>> Wei Zhao (2):
> >>>> net/ixgbe: enable new PF host mbox version
> >>>> net/ixgbe: fix VF RSS offloads configuration
> >>>>
> >>>> Xiao Wang (3):
> >>>> doc: fix typo in l2fwd-crypto guide
> >>>> net/fm10k: fix mbuf free in vector Rx
> >>>> net/ifc: check VFIO query error
> >>>>
> >>>> Xiao Zhang (7):
> >>>> net/i40e: fix VF runtime queues RSS config
> >>>> net/e1000: fix i219 hang on reset/close
> >>>> net/e1000: fix memory barrier usage in Tx
> >>>> net/ixgbe: fix X553 speed capability
> >>>> net/i40e: fix integer overflow
> >>>> examples/l3fwd-power: fix Rx interrupt disabling
> >>>> net/ixgbe: fix link status
> >>>>
> >>>> Xiaolong Ye (1):
> >>>> ethdev: fix typos for ENOTSUP
> >>>>
> >>>> Xiaoyu Min (5):
> >>>> net/mlx5: validate flow rule item order
> >>>> net/mlx5: allow pattern start from IP
> >>>> ethdev: fix expand RSS flows
> >>>> net/mlx5: fix crash on hash Rx queue handling for drop
> >>>> net/mlx5: improve flow item IP validation
> >>>>
> >>>> Xueming Li (3):
> >>>> malloc: fix realloc copy size
> >>>> malloc: fix realloc padded element size
> >>>> malloc: fix memory element size in case of padding
> >>>>
> >>>> Yasufumi Ogawa (1):
> >>>> net/null: fix multi-process Rx and Tx
> >>>>
> >>>> Yong Wang (1):
> >>>> net/ixgbe: remove redundant assignment
> >>>
> >>
> >
next prev parent reply other threads:[~2020-01-09 17:10 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-18 11:42 Kevin Traynor
2019-12-24 10:07 ` Yu, PingX
2020-01-08 18:32 ` Kevin Traynor
2020-01-08 18:34 ` Kevin Traynor
2020-01-09 8:30 ` Julien Meunier
2020-01-09 14:18 ` Kevin Traynor
2020-01-09 17:10 ` Trahe, Fiona [this message]
2019-12-25 5:17 ` Pei Zhang
[not found] ` <BN8PR21MB1217C1C2EF180C4D29DAF216DA280@BN8PR21MB1217.namprd21.prod.outlook.com>
[not found] ` <HK0P153MB0290B7D0487D922C3854BAF7E7270@HK0P153MB0290.APCP153.PROD.OUTLOOK.COM>
[not found] ` <MN2PR21MB123271BB60DB0E70ACD2FA91DA270@MN2PR21MB1232.namprd21.prod.outlook.com>
[not found] ` <HK0P153MB0290EECF6665FA00EC22867BE7270@HK0P153MB0290.APCP153.PROD.OUTLOOK.COM>
[not found] ` <MN2PR21MB123240BDE6BA187B4DE15F55DA270@MN2PR21MB1232.namprd21.prod.outlook.com>
2019-12-30 8:56 ` Lili Deng
2020-01-09 14:03 ` Kevin Traynor
2020-01-09 17:32 ` [dpdk-dev] [EXTERNAL] " Ju-Hyoung Lee
2020-01-09 13:38 ` [dpdk-dev] " Kevin Traynor
2019-12-26 13:35 ` Ali Alnubani
2020-01-09 13:41 ` Kevin Traynor
2020-01-14 14:40 ` Kevin Traynor
2020-01-19 5:31 ` Yu, PingX
2020-01-19 21:05 ` Kevin Traynor
2020-01-30 14:58 ` Stokes, Ian
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=BN6PR11MB179603A5E8E08E4709823CDFE4390@BN6PR11MB1796.namprd11.prod.outlook.com \
--to=fiona.trahe@intel.com \
--cc=Abhishek.Marathe@microsoft.com \
--cc=akhil.goyal@nxp.com \
--cc=alialnu@mellanox.com \
--cc=arkadiuszx.kusztal@intel.com \
--cc=benjamin.walker@intel.com \
--cc=bluca@debian.org \
--cc=dev@dpdk.org \
--cc=drc@linux.vnet.ibm.com \
--cc=hemant.agrawal@nxp.com \
--cc=ian.stokes@intel.com \
--cc=jerinj@marvell.com \
--cc=john.mcnamara@intel.com \
--cc=juhlee@microsoft.com \
--cc=julien.meunier@nokia.com \
--cc=ktraynor@redhat.com \
--cc=pezhang@redhat.com \
--cc=pingx.yu@intel.com \
--cc=qian.q.xu@intel.com \
--cc=rasland@mellanox.com \
--cc=stable@dpdk.org \
--cc=thomas@monjalon.net \
--cc=yuan.peng@intel.com \
--cc=zhaoyan.chen@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).