[dpdk-dev] Marvell DPDK 20.05 Roadmap

[dpdk-dev] Marvell DPDK 20.05 Roadmap

[Jerin Jacob Kollanukkaran]

General:
--------
# Add High-performance CTF based native tracer support.
RFC: https://www.mail-archive.com/dev@dpdk.org/msg154457.html
- Infrastructure to enable trace for dpdk library and applications
- UT and performance test cases for tracer
- Add trace points to ethdev, cryptodev, and eventdev library as a start.

# Introduce Graph subsystem for data/packet processing.
RFC: http://patches.dpdk.org/cover/65432/.
# Add basic packet processing nodes to work with the Graph subsystem.
# Example l3fwd-graph application to showcase the graph subsystem and basic packet processing nodes.
# v1 will be send based on TB and internal approvals. If there is no time then probably
postpone nodes and example application submission to v20.08.


Networking:
----------
# introduce IF proxy library
RFC: http://patches.dpdk.org/cover/64667/
# Add new rte_flow action to steer traffic to given PCIe device.
# Add l2fwd support for forwarding between asymmetric ports.
# octeontx2:
- Add rte_tm support.
- Add devargs for locking the NDC context for NIX and NPA.
# octeontx:
- Multi-segment support
- MTU
- Setting link up and down
- Rx/Tx HW offload checksum
- Flow control - pause frame
# Thunderx:
- Setting link up and down

Crypto:
------
# Event mode additions in ipsec-secgw

# octeontx2:
- Lookaside protocol support
- Crypto event adapter support

# Nitrox:
- Add 3DES_CBC, AES_CTR and AES_GCM symmetric crypto algorithms

Regexdev:
---------
# Complete the specification
# Review the common code from Mellanox when it is ready
# Add libpcre based SW driver.

Re: [dpdk-dev] Marvell DPDK 20.05 Roadmap

[Thomas Monjalon]

Converted into roadmap summary for the web:
	http://git.dpdk.org/tools/dpdk-web/commit/?id=dc44d51cc

I think it is reasonnable to announce IF proxy for 20.08,
given the discussion on the mailing list and in techboard meeting.


27/02/2020 08:49, Jerin Jacob Kollanukkaran:
> General:
> --------
> # Add High-performance CTF based native tracer support.
> RFC: https://www.mail-archive.com/dev@dpdk.org/msg154457.html
> - Infrastructure to enable trace for dpdk library and applications
> - UT and performance test cases for tracer
> - Add trace points to ethdev, cryptodev, and eventdev library as a start.
> 
> # Introduce Graph subsystem for data/packet processing.
> RFC: http://patches.dpdk.org/cover/65432/.
> # Add basic packet processing nodes to work with the Graph subsystem.
> # Example l3fwd-graph application to showcase the graph subsystem and basic packet processing nodes.
> # v1 will be send based on TB and internal approvals. If there is no time then probably
> postpone nodes and example application submission to v20.08.
> 
> 
> Networking:
> ----------
> # introduce IF proxy library
> RFC: http://patches.dpdk.org/cover/64667/
> # Add new rte_flow action to steer traffic to given PCIe device.
> # Add l2fwd support for forwarding between asymmetric ports.
> # octeontx2:
> - Add rte_tm support.
> - Add devargs for locking the NDC context for NIX and NPA.
> # octeontx:
> - Multi-segment support
> - MTU
> - Setting link up and down
> - Rx/Tx HW offload checksum
> - Flow control - pause frame
> # Thunderx:
> - Setting link up and down
> 
> Crypto:
> ------
> # Event mode additions in ipsec-secgw
> 
> # octeontx2:
> - Lookaside protocol support
> - Crypto event adapter support
> 
> # Nitrox:
> - Add 3DES_CBC, AES_CTR and AES_GCM symmetric crypto algorithms
> 
> Regexdev:
> ---------
> # Complete the specification
> # Review the common code from Mellanox when it is ready
> # Add libpcre based SW driver.