From: Harman Kalra <hkalra@marvell.com>
To: Harman Kalra <hkalra@marvell.com>, "dev@dpdk.org" <dev@dpdk.org>,
Thomas Monjalon <thomas@monjalon.net>,
Ferruh Yigit <ferruh.yigit@amd.com>,
Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>,
Ajit Khaparde <ajit.khaparde@broadcom.com>,
Somnath Kotur <somnath.kotur@broadcom.com>,
John Daley <johndale@cisco.com>,
Hyong Youb Kim <hyonkim@cisco.com>,
Yuying Zhang <Yuying.Zhang@intel.com>,
Beilei Xing <beilei.xing@intel.com>,
Qiming Yang <qiming.yang@intel.com>,
Qi Zhang <qi.z.zhang@intel.com>, Wenjun Wu <wenjun1.wu@intel.com>,
Dariusz Sosnowski <dsosnowski@nvidia.com>,
Viacheslav Ovsiienko <viacheslavo@nvidia.com>,
Ori Kam <orika@nvidia.com>, Suanming Mou <suanmingm@nvidia.com>,
Matan Azrad <matan@nvidia.com>,
Chaoyong He <chaoyong.he@corigine.com>
Subject: RE: [PATCH v4 1/1] ethdev: parsing multiple representor devargs string
Date: Thu, 25 Jan 2024 05:28:32 +0000 [thread overview]
Message-ID: <BN9PR18MB4204B66A5373523A410EE203C57A2@BN9PR18MB4204.namprd18.prod.outlook.com> (raw)
In-Reply-To: <20240121191908.156149-2-hkalra@marvell.com>
Ping...
Request for review comments please.
Thanks
Harman
> -----Original Message-----
> From: Harman Kalra <hkalra@marvell.com>
> Sent: Monday, January 22, 2024 12:49 AM
> To: dev@dpdk.org; Thomas Monjalon <thomas@monjalon.net>; Ferruh Yigit
> <ferruh.yigit@amd.com>; Andrew Rybchenko
> <andrew.rybchenko@oktetlabs.ru>; Ajit Khaparde
> <ajit.khaparde@broadcom.com>; Somnath Kotur
> <somnath.kotur@broadcom.com>; John Daley <johndale@cisco.com>;
> Hyong Youb Kim <hyonkim@cisco.com>; Yuying Zhang
> <Yuying.Zhang@intel.com>; Beilei Xing <beilei.xing@intel.com>; Qiming Yang
> <qiming.yang@intel.com>; Qi Zhang <qi.z.zhang@intel.com>; Wenjun Wu
> <wenjun1.wu@intel.com>; Dariusz Sosnowski <dsosnowski@nvidia.com>;
> Viacheslav Ovsiienko <viacheslavo@nvidia.com>; Ori Kam
> <orika@nvidia.com>; Suanming Mou <suanmingm@nvidia.com>; Matan
> Azrad <matan@nvidia.com>; Chaoyong He <chaoyong.he@corigine.com>
> Cc: Harman Kalra <hkalra@marvell.com>
> Subject: [PATCH v4 1/1] ethdev: parsing multiple representor devargs string
>
> Adding support for parsing multiple representor devargs strings passed to a
> PCI BDF. There may be scenario where port representors for various PFs or
> VFs under PFs are required and all these are representor ports shall be
> backed by single pci device. In such case port representors can be created
> using devargs string:
> <PCI BDF>,representor=[pf[0-1],pf2vf[1,2-3],[4-5]]
>
> Signed-off-by: Harman Kalra <hkalra@marvell.com>
> ---
> doc/guides/prog_guide/poll_mode_drv.rst | 4 +-
> .../prog_guide/switch_representation.rst | 1 +
> drivers/net/bnxt/bnxt_ethdev.c | 4 +-
> drivers/net/enic/enic_ethdev.c | 4 +-
> drivers/net/i40e/i40e_ethdev.c | 4 +-
> drivers/net/ice/ice_dcf_ethdev.c | 4 +-
> drivers/net/ixgbe/ixgbe_ethdev.c | 4 +-
> drivers/net/mlx5/linux/mlx5_os.c | 8 +-
> .../net/nfp/flower/nfp_flower_representor.c | 4 +-
> drivers/net/sfc/sfc_ethdev.c | 4 +-
> lib/ethdev/ethdev_driver.c | 108 +++++++++++++++---
> lib/ethdev/ethdev_driver.h | 9 +-
> 12 files changed, 122 insertions(+), 36 deletions(-)
>
> diff --git a/doc/guides/prog_guide/poll_mode_drv.rst
> b/doc/guides/prog_guide/poll_mode_drv.rst
> index c145a9066c..5008b41c60 100644
> --- a/doc/guides/prog_guide/poll_mode_drv.rst
> +++ b/doc/guides/prog_guide/poll_mode_drv.rst
> @@ -376,7 +376,7 @@ parameters to those ports.
>
> * ``representor`` for a device which supports the creation of representor
> ports
> this argument allows user to specify which switch ports to enable port
> - representors for. Multiple representors in one device argument is invalid::
> + representors for::
>
> -a DBDF,representor=vf0
> -a DBDF,representor=vf[0,4,6,9]
> @@ -389,6 +389,8 @@ parameters to those ports.
> -a DBDF,representor=pf1vf0
> -a DBDF,representor=pf[0-1]sf[0-127]
> -a DBDF,representor=pf1
> + -a DBDF,representor=[pf[0-1],pf2vf[0-2],pf3[3,5-8]]
> + (Multiple representors in one device argument can be represented as
> + a list)
>
> Note: PMDs are not required to support the standard device arguments and
> users should consult the relevant PMD documentation to see support
> devargs.
> diff --git a/doc/guides/prog_guide/switch_representation.rst
> b/doc/guides/prog_guide/switch_representation.rst
> index 6fd7b98bdc..46e0ca85a5 100644
> --- a/doc/guides/prog_guide/switch_representation.rst
> +++ b/doc/guides/prog_guide/switch_representation.rst
> @@ -77,6 +77,7 @@ thought as a software "patch panel" front-end for
> applications.
> -a pci:dbdf,representor=sf1
> -a pci:dbdf,representor=sf[0-1023]
> -a pci:dbdf,representor=sf[0,2-1023]
> + -a pci:dbdf,representor=[pf[0-1],pf2vf[0-2],pf3[3,5]]
>
> - As virtual devices, they may be more limited than their physical
> counterparts, for instance by exposing only a subset of device diff --git
> a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c index
> acf7e6e46e..5d4f599044 100644
> --- a/drivers/net/bnxt/bnxt_ethdev.c
> +++ b/drivers/net/bnxt/bnxt_ethdev.c
> @@ -6383,8 +6383,8 @@ static int bnxt_pci_probe(struct rte_pci_driver
> *pci_drv __rte_unused,
>
> if (pci_dev->device.devargs) {
> ret = rte_eth_devargs_parse(pci_dev->device.devargs->args,
> - ð_da);
> - if (ret)
> + ð_da, 1);
> + if (ret < 0)
> return ret;
> }
>
> diff --git a/drivers/net/enic/enic_ethdev.c b/drivers/net/enic/enic_ethdev.c
> index b04b6c9aa1..33d96ec07a 100644
> --- a/drivers/net/enic/enic_ethdev.c
> +++ b/drivers/net/enic/enic_ethdev.c
> @@ -1317,8 +1317,8 @@ static int eth_enic_pci_probe(struct rte_pci_driver
> *pci_drv __rte_unused,
> ENICPMD_FUNC_TRACE();
> if (pci_dev->device.devargs) {
> retval = rte_eth_devargs_parse(pci_dev->device.devargs-
> >args,
> - ð_da);
> - if (retval)
> + ð_da, 1);
> + if (retval < 0)
> return retval;
> }
> if (eth_da.nb_representor_ports > 0 && diff --git
> a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c index
> 3ca226156b..4d21341382 100644
> --- a/drivers/net/i40e/i40e_ethdev.c
> +++ b/drivers/net/i40e/i40e_ethdev.c
> @@ -646,8 +646,8 @@ eth_i40e_pci_probe(struct rte_pci_driver *pci_drv
> __rte_unused,
>
> if (pci_dev->device.devargs) {
> retval = rte_eth_devargs_parse(pci_dev->device.devargs-
> >args,
> - ð_da);
> - if (retval)
> + ð_da, 1);
> + if (retval < 0)
> return retval;
> }
>
> diff --git a/drivers/net/ice/ice_dcf_ethdev.c
> b/drivers/net/ice/ice_dcf_ethdev.c
> index 5d845bba31..0e991fe4b8 100644
> --- a/drivers/net/ice/ice_dcf_ethdev.c
> +++ b/drivers/net/ice/ice_dcf_ethdev.c
> @@ -2041,8 +2041,8 @@ eth_ice_dcf_pci_probe(__rte_unused struct
> rte_pci_driver *pci_drv,
> if (!ice_devargs_check(pci_dev->device.devargs,
> ICE_DCF_DEVARG_CAP))
> return 1;
>
> - ret = rte_eth_devargs_parse(pci_dev->device.devargs->args,
> ð_da);
> - if (ret)
> + ret = rte_eth_devargs_parse(pci_dev->device.devargs->args,
> ð_da, 1);
> + if (ret < 0)
> return ret;
>
> ret = rte_eth_dev_pci_generic_probe(pci_dev,
> diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c
> b/drivers/net/ixgbe/ixgbe_ethdev.c
> index d6cf00317e..98e9b8a031 100644
> --- a/drivers/net/ixgbe/ixgbe_ethdev.c
> +++ b/drivers/net/ixgbe/ixgbe_ethdev.c
> @@ -1765,8 +1765,8 @@ eth_ixgbe_pci_probe(struct rte_pci_driver
> *pci_drv __rte_unused,
>
> if (pci_dev->device.devargs) {
> retval = rte_eth_devargs_parse(pci_dev->device.devargs-
> >args,
> - ð_da);
> - if (retval)
> + ð_da, 1);
> + if (retval < 0)
> return retval;
> } else
> memset(ð_da, 0, sizeof(eth_da));
> diff --git a/drivers/net/mlx5/linux/mlx5_os.c
> b/drivers/net/mlx5/linux/mlx5_os.c
> index ae82e1e5d8..17061126d5 100644
> --- a/drivers/net/mlx5/linux/mlx5_os.c
> +++ b/drivers/net/mlx5/linux/mlx5_os.c
> @@ -2733,16 +2733,16 @@ mlx5_os_parse_eth_devargs(struct rte_device
> *dev,
> memset(eth_da, 0, sizeof(*eth_da));
> /* Parse representor information first from class argument. */
> if (dev->devargs->cls_str)
> - ret = rte_eth_devargs_parse(dev->devargs->cls_str, eth_da);
> - if (ret != 0) {
> + ret = rte_eth_devargs_parse(dev->devargs->cls_str, eth_da,
> 1);
> + if (ret < 0) {
> DRV_LOG(ERR, "failed to parse device arguments: %s",
> dev->devargs->cls_str);
> return -rte_errno;
> }
> if (eth_da->type == RTE_ETH_REPRESENTOR_NONE && dev-
> >devargs->args) {
> /* Parse legacy device argument */
> - ret = rte_eth_devargs_parse(dev->devargs->args, eth_da);
> - if (ret) {
> + ret = rte_eth_devargs_parse(dev->devargs->args, eth_da, 1);
> + if (ret < 0) {
> DRV_LOG(ERR, "failed to parse device arguments:
> %s",
> dev->devargs->args);
> return -rte_errno;
> diff --git a/drivers/net/nfp/flower/nfp_flower_representor.c
> b/drivers/net/nfp/flower/nfp_flower_representor.c
> index 5f7c1fa737..63fe37c8d7 100644
> --- a/drivers/net/nfp/flower/nfp_flower_representor.c
> +++ b/drivers/net/nfp/flower/nfp_flower_representor.c
> @@ -792,8 +792,8 @@ nfp_flower_repr_create(struct nfp_app_fw_flower
> *app_fw_flower)
>
> /* Now parse PCI device args passed for representor info */
> if (pci_dev->device.devargs != NULL) {
> - ret = rte_eth_devargs_parse(pci_dev->device.devargs->args,
> ð_da);
> - if (ret != 0) {
> + ret = rte_eth_devargs_parse(pci_dev->device.devargs->args,
> ð_da, 1);
> + if (ret < 0) {
> PMD_INIT_LOG(ERR, "devarg parse failed");
> return -EINVAL;
> }
> diff --git a/drivers/net/sfc/sfc_ethdev.c b/drivers/net/sfc/sfc_ethdev.c index
> 6d57b2ba26..0bbcb80365 100644
> --- a/drivers/net/sfc/sfc_ethdev.c
> +++ b/drivers/net/sfc/sfc_ethdev.c
> @@ -3305,8 +3305,8 @@ sfc_parse_rte_devargs(const char *args, struct
> rte_eth_devargs *devargs)
> int rc;
>
> if (args != NULL) {
> - rc = rte_eth_devargs_parse(args, ð_da);
> - if (rc != 0) {
> + rc = rte_eth_devargs_parse(args, ð_da, 1);
> + if (rc < 0) {
> SFC_GENERIC_LOG(ERR,
> "Failed to parse generic devargs '%s'",
> args);
> diff --git a/lib/ethdev/ethdev_driver.c b/lib/ethdev/ethdev_driver.c index
> bd917a15fc..4c0d22f838 100644
> --- a/lib/ethdev/ethdev_driver.c
> +++ b/lib/ethdev/ethdev_driver.c
> @@ -2,6 +2,7 @@
> * Copyright(c) 2022 Intel Corporation
> */
>
> +#include <ctype.h>
> #include <stdlib.h>
> #include <pthread.h>
>
> @@ -459,9 +460,26 @@ eth_dev_devargs_tokenise(struct rte_kvargs
> *arglist, const char *str_in)
> break;
>
> case 3: /* Parsing list */
> - if (*letter == ']')
> - state = 2;
> - else if (*letter == '\0')
> + if (*letter == ']') {
> + /* For devargs having singles lists move to
> state 2 once letter
> + * becomes ']' so each can be considered as
> different pair key
> + * value. But in nested lists case e.g. multiple
> representors
> + * case i.e. [pf[0-3],pfvf[3,4-6]], complete
> nested list should
> + * be considered as one pair value, hence
> checking if end of outer
> + * list ']' is reached else stay on state 3.
> + */
> + if ((strcmp("representor", pair->key) == 0)
> &&
> + (*(letter + 1) != '\0' && *(letter + 2) != '\0'
> &&
> + *(letter + 3) != '\0') &&
> + ((*(letter + 2) == 'p' && *(letter + 3) == 'f')
> ||
> + (*(letter + 2) == 'v' && *(letter + 3) == 'f') ||
> + (*(letter + 2) == 's' && *(letter + 3) == 'f') ||
> + (*(letter + 2) == 'c' && isdigit(*(letter + 3)))
> ||
> + (*(letter + 2) == '[' && isdigit(*(letter +
> 3)))))
> + state = 3;
> + else
> + state = 2;
> + } else if (*letter == '\0')
> return -EINVAL;
> break;
> }
> @@ -469,16 +487,56 @@ eth_dev_devargs_tokenise(struct rte_kvargs
> *arglist, const char *str_in)
> }
> }
>
> +static int
> +eth_dev_tokenise_representor_list(char *p_val, struct rte_eth_devargs
> *eth_devargs,
> + unsigned int nb_da)
> +{
> + struct rte_eth_devargs *eth_da;
> + char da_val[BUFSIZ];
> + char *token, *sptr;
> + char delim[] = "]";
> + int devargs = 0;
> + int result = 0;
> +
> + token = strtok_r(&p_val[1], delim, &sptr);
> + while (token != NULL) {
> + eth_da = ð_devargs[devargs];
> + memset(eth_da, 0, sizeof(*eth_da));
> + snprintf(da_val, BUFSIZ, "%s%c", (token[0] == ',') ? ++token :
> token, ']');
> + /* Parse the tokenised devarg value */
> + result = rte_eth_devargs_parse_representor_ports(da_val,
> eth_da);
> + if (result < 0)
> + goto parse_cleanup;
> + devargs++;
> + if (devargs > (int)nb_da) {
> + RTE_ETHDEV_LOG_LINE(ERR,
> + "Devargs parsed %d > max array
> size %d",
> + devargs, nb_da);
> + result = -1;
> + goto parse_cleanup;
> + }
> + token = strtok_r(NULL, delim, &sptr);
> + }
> +
> + result = devargs;
> +
> +parse_cleanup:
> + return result;
> +
> +}
> +
> int
> -rte_eth_devargs_parse(const char *dargs, struct rte_eth_devargs *eth_da)
> +rte_eth_devargs_parse(const char *dargs, struct rte_eth_devargs
> *eth_devargs,
> + unsigned int nb_da)
> {
> - struct rte_kvargs args;
> + struct rte_eth_devargs *eth_da;
> struct rte_kvargs_pair *pair;
> + struct rte_kvargs args;
> + static bool dup_rep;
> + int devargs = 0;
> unsigned int i;
> int result = 0;
>
> - memset(eth_da, 0, sizeof(*eth_da));
> -
> result = eth_dev_devargs_tokenise(&args, dargs);
> if (result < 0)
> goto parse_cleanup;
> @@ -486,18 +544,40 @@ rte_eth_devargs_parse(const char *dargs, struct
> rte_eth_devargs *eth_da)
> for (i = 0; i < args.count; i++) {
> pair = &args.pairs[i];
> if (strcmp("representor", pair->key) == 0) {
> - if (eth_da->type != RTE_ETH_REPRESENTOR_NONE) {
> - RTE_ETHDEV_LOG_LINE(ERR, "duplicated
> representor key: %s",
> - dargs);
> + if (dup_rep) {
> + RTE_ETHDEV_LOG_LINE(ERR, "Duplicated
> representor key: %s",
> + pair->value);
> result = -1;
> goto parse_cleanup;
> }
> - result = rte_eth_devargs_parse_representor_ports(
> - pair->value, eth_da);
> - if (result < 0)
> - goto parse_cleanup;
> +
> + if (pair->value[0] == '[' && !isdigit(pair->value[1])) {
> + /* Multiple representor list case */
> + devargs =
> eth_dev_tokenise_representor_list(pair->value,
> +
> eth_devargs, nb_da);
> + if (devargs < 0)
> + goto parse_cleanup;
> + } else {
> + /* Single representor case */
> + eth_da = ð_devargs[devargs];
> + memset(eth_da, 0, sizeof(*eth_da));
> + result =
> +
> rte_eth_devargs_parse_representor_ports(pair->value,
> +
> eth_da);
> + if (result < 0)
> + goto parse_cleanup;
> + devargs++;
> + if (devargs > (int)nb_da) {
> + RTE_ETHDEV_LOG_LINE(ERR,
> "Devargs parsed %d > max array size %d",
> + devargs, nb_da);
> + result = -1;
> + goto parse_cleanup;
> + }
> + }
> + dup_rep = true;
> }
> }
> + result = devargs;
>
> parse_cleanup:
> free(args.str);
> diff --git a/lib/ethdev/ethdev_driver.h b/lib/ethdev/ethdev_driver.h index
> b482cd12bb..fd6f404e9a 100644
> --- a/lib/ethdev/ethdev_driver.h
> +++ b/lib/ethdev/ethdev_driver.h
> @@ -1800,14 +1800,17 @@ rte_eth_representor_id_get(uint16_t port_id,
> * @param devargs
> * device arguments
> * @param eth_devargs
> - * parsed ethdev specific arguments.
> + * contiguous memory populated with parsed ethdev specific arguments.
> + * @param nb_da
> + * size of eth_devargs array passed
> *
> * @return
> - * Negative errno value on error, 0 on success.
> + * Negative errno value on error, no of devargs parsed on success.
> */
> __rte_internal
> int
> -rte_eth_devargs_parse(const char *devargs, struct rte_eth_devargs
> *eth_devargs);
> +rte_eth_devargs_parse(const char *devargs, struct rte_eth_devargs
> *eth_devargs,
> + unsigned int nb_da);
>
>
> typedef int (*ethdev_init_t)(struct rte_eth_dev *ethdev, void *init_params);
> --
> 2.18.0
next prev parent reply other threads:[~2024-01-25 5:28 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-11 6:44 [PATCH 0/2] multiple representors in one device Harman Kalra
2024-01-11 6:44 ` [PATCH 1/2] ethdev: parsing multiple representor devargs string Harman Kalra
2024-01-12 7:25 ` Andrew Rybchenko
2024-01-12 9:37 ` [EXT] " Harman Kalra
2024-01-12 12:42 ` David Marchand
2024-01-15 16:01 ` [EXT] " Harman Kalra
2024-01-11 6:44 ` [PATCH 2/2] doc: multiple representors in one device Harman Kalra
2024-01-12 7:26 ` Andrew Rybchenko
2024-01-15 16:01 ` [EXT] " Harman Kalra
2024-01-15 15:57 ` [PATCH v2 0/1] " Harman Kalra
2024-01-15 15:57 ` [PATCH v2 1/1] ethdev: parsing multiple representor devargs string Harman Kalra
2024-01-16 9:55 ` [PATCH v3 0/1] multiple representors in one device Harman Kalra
2024-01-16 9:55 ` [PATCH v3 1/1] ethdev: parsing multiple representor devargs string Harman Kalra
2024-01-17 8:47 ` Andrew Rybchenko
2024-01-21 19:30 ` [EXT] " Harman Kalra
2024-01-21 19:19 ` [PATCH v4 0/1] multiple representors in one device Harman Kalra
2024-01-21 19:19 ` [PATCH v4 1/1] ethdev: parsing multiple representor devargs string Harman Kalra
2024-01-22 1:13 ` Chaoyong He
2024-01-22 9:07 ` Harman Kalra
2024-01-22 10:10 ` Chaoyong He
2024-01-25 5:28 ` Harman Kalra [this message]
2024-01-26 13:43 ` Ferruh Yigit
2024-01-29 18:20 ` [EXT] " Harman Kalra
2024-01-30 23:09 ` Ferruh Yigit
2024-02-01 10:10 ` Harman Kalra
2024-02-01 10:02 ` [PATCH v5 0/2] multiple representors in one device Harman Kalra
2024-02-01 10:02 ` [PATCH v5 1/2] ethdev: parsing multiple representor devargs string Harman Kalra
2024-02-01 10:02 ` [PATCH v5 2/2] test/devargs: add eth devargs parse cases Harman Kalra
2024-02-01 18:35 ` [PATCH v5 0/2] multiple representors in one device Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=BN9PR18MB4204B66A5373523A410EE203C57A2@BN9PR18MB4204.namprd18.prod.outlook.com \
--to=hkalra@marvell.com \
--cc=Yuying.Zhang@intel.com \
--cc=ajit.khaparde@broadcom.com \
--cc=andrew.rybchenko@oktetlabs.ru \
--cc=beilei.xing@intel.com \
--cc=chaoyong.he@corigine.com \
--cc=dev@dpdk.org \
--cc=dsosnowski@nvidia.com \
--cc=ferruh.yigit@amd.com \
--cc=hyonkim@cisco.com \
--cc=johndale@cisco.com \
--cc=matan@nvidia.com \
--cc=orika@nvidia.com \
--cc=qi.z.zhang@intel.com \
--cc=qiming.yang@intel.com \
--cc=somnath.kotur@broadcom.com \
--cc=suanmingm@nvidia.com \
--cc=thomas@monjalon.net \
--cc=viacheslavo@nvidia.com \
--cc=wenjun1.wu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).