From: "Ananyev, Konstantin" <konstantin.ananyev@intel.com>
To: Pu Xu <583493798@qq.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>,
"Burakov, Anatoly" <anatoly.burakov@intel.com>,
"stable@dpdk.org" <stable@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH] ip_frag: fix fragmenting ipv4 packet with header options
Date: Thu, 30 Apr 2020 18:35:58 +0000 [thread overview]
Message-ID: <BYAPR11MB330169FFAA1D0B47FF8B82109AAA0@BYAPR11MB3301.namprd11.prod.outlook.com> (raw)
In-Reply-To: <20200430022222.3779-1-583493798@qq.com>
> When fragmenting ipv4 packet, the data offset should be calculated through the ihl field in ip header rather than using sizeof(struct
> rte_ipv4_hdr).
Seems you missed my comments, except the very first one.
Please look at my email and try to address all of them.
>
> Fixes: 4c38e5532a07 ("ip_frag: refactor IPv4 fragmentation into a proper library")
> Cc: anatoly.burakov@intel.com
> Cc: stable@dpdk.org
>
> Signed-off-by: Pu Xu <583493798@qq.com>
> ---
> lib/librte_ip_frag/rte_ipv4_fragmentation.c | 20 +++++++++++---------
> 1 file changed, 11 insertions(+), 9 deletions(-)
>
> diff --git a/lib/librte_ip_frag/rte_ipv4_fragmentation.c b/lib/librte_ip_frag/rte_ipv4_fragmentation.c
> index e9de335ae..156087ca3 100644
> --- a/lib/librte_ip_frag/rte_ipv4_fragmentation.c
> +++ b/lib/librte_ip_frag/rte_ipv4_fragmentation.c
> @@ -74,7 +74,7 @@ rte_ipv4_fragment_packet(struct rte_mbuf *pkt_in,
> struct rte_ipv4_hdr *in_hdr;
> uint32_t out_pkt_pos, in_seg_data_pos;
> uint32_t more_in_segs;
> - uint16_t fragment_offset, flag_offset, frag_size;
> + uint16_t fragment_offset, flag_offset, frag_size, header_len;
> uint16_t frag_bytes_remaining;
>
> /*
> @@ -86,14 +86,16 @@ rte_ipv4_fragment_packet(struct rte_mbuf *pkt_in,
> unlikely(mtu_size < RTE_ETHER_MIN_MTU))
> return -EINVAL;
>
> + in_hdr = rte_pktmbuf_mtod(pkt_in, struct rte_ipv4_hdr *);
> +
> + header_len = (in_hdr->version_ihl & 0xf) * 4;
> /*
> * Ensure the IP payload length of all fragments is aligned to a
> * multiple of 8 bytes as per RFC791 section 2.3.
> */
> - frag_size = RTE_ALIGN_FLOOR((mtu_size - sizeof(struct rte_ipv4_hdr)),
> + frag_size = RTE_ALIGN_FLOOR((mtu_size - header_len),
> IPV4_HDR_FO_ALIGN);
>
> - in_hdr = rte_pktmbuf_mtod(pkt_in, struct rte_ipv4_hdr *);
> flag_offset = rte_cpu_to_be_16(in_hdr->fragment_offset);
>
> /* If Don't Fragment flag is set */
> @@ -102,11 +104,11 @@ rte_ipv4_fragment_packet(struct rte_mbuf *pkt_in,
>
> /* Check that pkts_out is big enough to hold all fragments */
> if (unlikely(frag_size * nb_pkts_out <
> - (uint16_t)(pkt_in->pkt_len - sizeof(struct rte_ipv4_hdr))))
> + (uint16_t)(pkt_in->pkt_len - header_len)))
> return -EINVAL;
>
> in_seg = pkt_in;
> - in_seg_data_pos = sizeof(struct rte_ipv4_hdr);
> + in_seg_data_pos = header_len;
> out_pkt_pos = 0;
> fragment_offset = 0;
>
> @@ -124,8 +126,8 @@ rte_ipv4_fragment_packet(struct rte_mbuf *pkt_in,
> }
>
> /* Reserve space for the IP header that will be built later */
> - out_pkt->data_len = sizeof(struct rte_ipv4_hdr);
> - out_pkt->pkt_len = sizeof(struct rte_ipv4_hdr);
> + out_pkt->data_len = header_len;
> + out_pkt->pkt_len = header_len;
> frag_bytes_remaining = frag_size;
>
> out_seg_prev = out_pkt;
> @@ -181,9 +183,9 @@ rte_ipv4_fragment_packet(struct rte_mbuf *pkt_in,
> flag_offset, fragment_offset, more_in_segs);
>
> fragment_offset = (uint16_t)(fragment_offset +
> - out_pkt->pkt_len - sizeof(struct rte_ipv4_hdr));
> + out_pkt->pkt_len - header_len);
>
> - out_pkt->l3_len = sizeof(struct rte_ipv4_hdr);
> + out_pkt->l3_len = header_len;
>
> /* Write the fragment to the output list */
> pkts_out[out_pkt_pos] = out_pkt;
> --
> 2.17.1
prev parent reply other threads:[~2020-04-30 18:36 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-30 2:22 Pu Xu
2020-04-30 18:35 ` Ananyev, Konstantin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=BYAPR11MB330169FFAA1D0B47FF8B82109AAA0@BYAPR11MB3301.namprd11.prod.outlook.com \
--to=konstantin.ananyev@intel.com \
--cc=583493798@qq.com \
--cc=anatoly.burakov@intel.com \
--cc=dev@dpdk.org \
--cc=stable@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).