From: "Ananyev, Konstantin" <konstantin.ananyev@intel.com>
To: Honnappa Nagarahalli <Honnappa.Nagarahalli@arm.com>,
"dev@dpdk.org" <dev@dpdk.org>
Cc: "aconole@redhat.com" <aconole@redhat.com>, nd <nd@arm.com>,
nd <nd@arm.com>
Subject: Re: [dpdk-dev] [PATCH] test/ring: code rework to reduce compilation time
Date: Wed, 13 May 2020 11:20:03 +0000 [thread overview]
Message-ID: <BYAPR11MB3301C68781FF8E4C372E48E09ABF0@BYAPR11MB3301.namprd11.prod.outlook.com> (raw)
In-Reply-To: <DBBPR08MB4646D4BF432AB32FBCA113FF98BF0@DBBPR08MB4646.eurprd08.prod.outlook.com>
> > > > > > > > > > > > > Hi Konstantin,
> > > > > > > > > > > > > I like the way the tests are organized and it
> > > > > > > > > > > > > looks
> > > > good.
> > > > > > > > > > > > >
> > > > > > > > > > > > > I am just wondering about the way it is being tested here.
> > > > > > > > > > > > > The intent to write the test cases the way they
> > > > > > > > > > > > > are currently is to mimic how the APIs would be used
> > mostly.
> > > > > > > > > > > > > IMO, the APIs would be used with a constant
> > > > > > > > > > > > value for element size so that the compiler will
> > > > > > > > > > > > throw away the unwanted code (in the functions where
> > > > > > > > > > > > the actual copy is being
> > > > > > done).
> > > > > > > > > > > > >
> > > > > > > > > > > > > With your method here, it looks to me like all the
> > > > > > > > > > > > > branches in the copy
> > > > > > > > > > > > functions are kept and the branch decisions are done
> > > > > > > > > > > > at run
> > > > time.
> > > > > > > > > > > > > Is my understanding correct?
> > > > > > > > > > > >
> > > > > > > > > > > > You mean branching on esize[] values?
> > > > > > > > > > > Yes
> > > > > I was wondering where is the confusion. I interpreted as referring
> > > > > to the esize parameter in rte_ring_xxx_elem APIs. Anyway, please see
> > below.
> > > > >
> > > > > > > > > > >
> > > > > > > > > > > > Actually from what I've seen that happens for both cases:
> > > > > > > > > > > > before and after the patch (gcc 7.3 -O3).
> > > > > > > > > > > I did not look at the generated code. If it is
> > > > > > > > > > > happening with your patch too, I
> > > > > > > > > > think we can go with your patch.
> > > > > > > > > >
> > > > > > > > > > Just to clarify, what I meant:
> > > > > > > > > > For both binaries (without the patch and with the patch)
> > > > > > > > > > inside
> > > > > > > > > > test_ring() I see runtime branches on esize value.
> > > > > > > > > > Literally the code that corresponds to:
> > > > > > > > > > if (esize == 8) {...}
> > > > > > > > > > else if (esize == 16) {...} else {...}
> > > > > > > I am not concerned about the functions in test_ring.c.
> > > > > > >
> > > > > > > > > Do you see this in the actual ring library functions?
> > > > > > > >
> > > > > > > > Which ones? AFAIK all ring dequeue/enqueue functions are
> > > > > > > > inline right
> > > > > > now.
> > > > > > > Please see below.
> > > > > > >
> > > > > > > >
> > > > > > > > > I want to make sure that the library functions
> > > > > > > > > '__rte_ring_enqueue_elems' and '__rte_ring_dequeue_elems'
> > > > > > > > > are
> > > > > > optimized.
> > > > > > > Each enqueue/dequeue function ultimately calls these 2 functions.
> > > > > >
> > > > > > Yes, and then each instance of enqueue/dequeue functions that is
> > > > > > used by upper layer would be in-lined.
> > > > > > So what upper layer function (library or app) you asked me to check?
> > > > > I am not bothered much about upper layer functions. I looked at
> > > > > the
> > > > generate code for the function __rte_ring_enqueue_elems.
> > > > > Existing code has the if checks for 8 and 16.
> > > > > Your patch also has the checks.
> > > > > My patch does not have the checks as it passes the constants
> > > > > directly
> > > > without using esize[] array in functions test_ring_burst_bulk_tests4.
> > > >
> > > > For test_burst_bulk_test[1-4] - yes, for other test functions it is still there.
> > > Agree. This should give coverage for some at least.
> > >
> > > > Though I don't think it is that important for functional test cases.
> > > > Anyway, I think we dragged away a bit in our discussion, so with
> > > > what patch should we go ahead?
> > > Agree, we dragged it. I tried to merge both the solutions (use your
> > > patch and constant esize), I was not successful. My guess, function pointers
> > are not allowing for the optimization.
> >
> > I think it can be done pretty easily by replacing loop over esize[], with
> > particular constant value in each of test_ring_burst_bulk_tests[1-4] functions.
> > I.E:
> >
> > test_ring_burst_bulk_tests2(unsigned int test_idx)
> > struct rte_ring *r;
> > void **src = NULL, **cur_src = NULL, **dst = NULL, **cur_dst = NULL;
> > int ret;
> > - unsigned int i;
> > -
> > - for (i = 0; i < RTE_DIM(esize); i++) {
> > - test_ring_print_test_string(test_enqdeq_impl[test_idx].desc,
> > - test_enqdeq_impl[test_idx].api_type, esize[i]);
> > ....
> >
> > + const int elem_size = 4;
> > +
> > + test_ring_print_test_string(test_enqdeq_impl[test_idx].desc,
> > + test_enqdeq_impl[test_idx].api_type, elem_size);
> >
> > I just not very fond of idea to reduce number of test-cases, just because
> > compiler wasn't able to do some optimizations we hoped it would.
> I had tried a similar variant, it did not work. This does not work as well. I am trying on Arm machines, did not try x86.
Interesting...
As I can see on x86 such approach does help (as long as you build with -O3 off course).
>
> >
> > >
> > > > My preference is 69559, as it compiles faster and doesn't reduce
> > > > test coverage, but I can live with both.
> > > test_burst_bulk_test[1-4] more or less call the same APIs. Spreading
> > > the size variation across four of them should be ok. It will test the way it will
> > be used.
> > >
> > > > Konstantin
> > > >
> > > > >
> > > > > >
> > > > > > > The compiler here should remove the 'if (esize == 8) {...}
> > > > > > > else if (esize ==
> > > > > > > 16) {...} else {...}' with just the required piece of code
> > > > > > > depending on the
> > > > > > 'esize'.
> > > > > > > If we can validate that for at least one ring library function
> > > > > > > used in this patch, we should be good.
> > > > > > >
> > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > Probably gcc wasn't able to remove it because we use
> > > > > > > > > > esize[] instead of hard- coded values, might be there is
> > > > > > > > > > some other reason, I don't know
> > > > > > > > for sure.
> > > > > > > > > > As it is a functional (not performance) test, I didn't dig further.
> > > > > > > > > The esize[] array is declared as a const. The compiler
> > > > > > > > > should be able to see
> > > > > > > > that it is a compile time constant.
> > > > > > > >
> > > > > > > > That was my expectation too, but that not what I am seeing.
> > > > > > > >
> > > > > > > > > >
> > > > > > > > > > > But, can you do similar change to test_ring_perf.c to
> > > > > > > > > > > keep it consistent?
> > > > > > > > > >
> > > > > > > > > > In principle it is doable, but needs extra care.
> > > > > > > > > > We need to make sure that compiler will be able to
> > > > > > > > > > inline functions via pointers.
> > > > > > > > > > AFAIK, gcc does that with -O3', but not with '-O2'.
> > > > > > > > > If the unwanted code is not removed during compilation, we
> > > > > > > > > will see it
> > > > > > > > affect the performance numbers.
> > > > > > > >
> > > > > > > > Exactly.
> > > > > > > > The last thing I want - someone who uses older version of
> > > > > > > > compiler, etc., will start to see lower performance numbers
> > > > > > > > with that
> > > > test.
> > > > > > > >
> > > > > > > > > > Don't know what the story with clang and different
> > > > > > > > > > versions of the
> > > > > > > > compiler.
> > > > > > > > > > Is there any real need for that?
> > > > > > > > > > On my box test_ring_perf.c compilation takes ~8s.
> > > > > > > > > > Konstantin
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > Main intention in my changes was to avoid using
> > > > > > > > > > > > test_ring_enqueue/test_ring_dequeue,
> > > > > > > > > > > > as it seems too many branches here and it takes
> > > > > > > > > > > > compiler a lot of effort to resolve all of them at compile
> > time.
> > > > > > > > > > > > So I replaced it with array of function pointers
> > > > > > > > > > > > (test_enqdeq_impl[]) and iterating over it.
> > > > > > > > > > > > That way compiler knows straightway which function to use.
> > > > > > > > > > > >
> > > > > > > > > > > > > Can you please check this?
> > > > > > > > > > > > > https://patches.dpdk.org/patch/69567/
> > > > > > > > > > > >
> > > > > > > > > > > > As I can see your approach reduces number of
> > > > > > > > > > > > test-cases by factor
> > > > > > of 5:
> > > > > > > > > > > > now each of test_ring_burst_bulk_tests[1-4] is
> > > > > > > > > > > > executed only with just one esize value, correct?
> > > > > > > > > > > Yes, basically test_ring_burst_bulk_tests[1-4] were
> > > > > > > > > > > covering different scenarios with the same APIs. So,
> > > > > > > > > > > distributed the esize across different test
> > > > > > > > > > functions.
> > > > > > > > > > >
> > > > > > > > > > > > In term of compilation speed - it helps.
> > > > > > > > > > > > On my box with (gcc 7.3 -O3) compiling test_ring.c takes:
> > > > > > > > > > > > orig code: ~100s
> > > > > > > > > > > > with 69567 (your patch): < 20s
> > > > > > > > > > > > with 69559 (my patch): < 10s
> > > > > > > > > > > >
> > > > > > > > > > > > Konstantin
> > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > > -----Original Message-----
> > > > > > > > > > > > > > From: Konstantin Ananyev
> > > > > > > > > > > > > > <konstantin.ananyev@intel.com>
> > > > > > > > > > > > > > Sent: Wednesday, April 29, 2020 12:57 PM
> > > > > > > > > > > > > > To: dev@dpdk.org
> > > > > > > > > > > > > > Cc: aconole@redhat.com; Honnappa Nagarahalli
> > > > > > > > > > > > > > <Honnappa.Nagarahalli@arm.com>; Konstantin
> > > > > > > > > > > > > > Ananyev <konstantin.ananyev@intel.com>
> > > > > > > > > > > > > > Subject: [PATCH] test/ring: code rework to
> > > > > > > > > > > > > > reduce compilation time
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Rework test code to reduce code complexity for
> > > > > > > > > > > > > > the compiler and bring down compilation time and
> > > > > > > > > > > > > > memory
> > > > > > consumption.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Signed-off-by: Konstantin Ananyev
> > > > > > > > > > > > > > <konstantin.ananyev@intel.com>
> > > > > > > > > > > > > > ---
> > > > > > > > > > > > > > app/test/test_ring.c | 373
> > > > > > > > > > > > > > +++++++++++++++++++++++++++++--------------
> > > > > > > > > > > > > > 1 file changed, 249 insertions(+), 124
> > > > > > > > > > > > > > deletions(-)
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > diff --git a/app/test/test_ring.c
> > > > > > > > > > > > > > b/app/test/test_ring.c index
> > > > > > > > > > > > > > e21557cd9..0ae97d341 100644
> > > > > > > > > > > > > > --- a/app/test/test_ring.c
> > > > > > > > > > > > > > +++ b/app/test/test_ring.c
> > > > > > > > > > > > > > @@ -58,6 +58,181 @@
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > static const int esize[] = {-1, 4, 8, 16, 20};
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > +static const struct {
> > > > > > > > > > > > > > + const char *desc;
> > > > > > > > > > > > > > + uint32_t api_type;
> > > > > > > > > > > > > > + uint32_t create_flags;
> > > > > > > > > > > > > > + struct {
> > > > > > > > > > > > > > + unsigned int (*flegacy)(struct rte_ring *r,
> > > > > > > > > > > > > > + void * const *obj_table, unsigned int
> > > > n,
> > > > > > > > > > > > > > + unsigned int *free_space);
> > > > > > > > > > > > > > + unsigned int (*felem)(struct rte_ring *r,
> > > > > > > > > > > > > > +const void
> > > > > > > > > > *obj_table,
> > > > > > > > > > > > > > + unsigned int esize, unsigned int n,
> > > > > > > > > > > > > > + unsigned int *free_space);
> > > > > > > > > > > > > > + } enq;
> > > > > > > > > > > > > > + struct {
> > > > > > > > > > > > > > + unsigned int (*flegacy)(struct rte_ring *r,
> > > > > > > > > > > > > > + void **obj_table, unsigned int n,
> > > > > > > > > > > > > > + unsigned int *available);
> > > > > > > > > > > > > > + unsigned int (*felem)(struct rte_ring *r,
> > > > > > > > > > > > > > +void
> > > > > > > > > > *obj_table,
> > > > > > > > > > > > > > + unsigned int esize, unsigned int n,
> > > > > > > > > > > > > > + unsigned int *available);
> > > > > > > > > > > > > > + } deq;
> > > > > > > > > > > > > > +} test_enqdeq_impl[] = {
> > > > > > > > > > > > > > + {
> > > > > > > > > > > > > > + .desc = "MP/MC sync mode",
> > > > > > > > > > > > > Details about the tests are already printed by the
> > > > > > > > > > > > > function
> > > > > > > > > > > > 'test_ring_print_test_string'. This string should be
> > > > > > > > > > > > 'Test standard
> > > > > > ring'.
> > > > > > > > > > > > >
> > > > > > > > > > > > > > + .api_type = TEST_RING_ELEM_BULK |
> > > > > > > > > > > > > > TEST_RING_THREAD_DEF,
> > > > > > > > > > > > > > + .create_flags = 0,
> > > > > > > > > > > > > > + .enq = {
> > > > > > > > > > > > > > + .flegacy = rte_ring_enqueue_bulk,
> > > > > > > > > > > > > > + .felem = rte_ring_enqueue_bulk_elem,
> > > > > > > > > > > > > > + },
> > > > > > > > > > > > > > + .deq = {
> > > > > > > > > > > > > > + .flegacy = rte_ring_dequeue_bulk,
> > > > > > > > > > > > > > + .felem = rte_ring_dequeue_bulk_elem,
> > > > > > > > > > > > > > + },
> > > > > > > > > > > > > > + },
> > > > > > > > > > > > > > + {
> > > > > > > > > > > > > > + .desc = "SP/SC sync mode",
> > > > > > > > > > > > > > + .api_type = TEST_RING_ELEM_BULK |
> > > > > > > > > > > > > > TEST_RING_THREAD_SPSC,
> > > > > > > > > > > > > > + .create_flags = RING_F_SP_ENQ |
> > > > RING_F_SC_DEQ,
> > > > > > > > > > > > > > + .enq = {
> > > > > > > > > > > > > > + .flegacy = rte_ring_sp_enqueue_bulk,
> > > > > > > > > > > > > > + .felem =
> > > > rte_ring_sp_enqueue_bulk_elem,
> > > > > > > > > > > > > > + },
> > > > > > > > > > > > > > + .deq = {
> > > > > > > > > > > > > > + .flegacy = rte_ring_sc_dequeue_bulk,
> > > > > > > > > > > > > > + .felem =
> > > > rte_ring_sc_dequeue_bulk_elem,
> > > > > > > > > > > > > > + },
> > > > > > > > > > > > > > + },
> > > > > > > > > > > > > > + {
> > > > > > > > > > > > > > + .desc = "MP/MC sync mode",
> > > > > > > > > > > > > > + .api_type = TEST_RING_ELEM_BULK |
> > > > > > > > > > > > > > TEST_RING_THREAD_MPMC,
> > > > > > > > > > > > > > + .create_flags = 0,
> > > > > > > > > > > > > > + .enq = {
> > > > > > > > > > > > > > + .flegacy = rte_ring_mp_enqueue_bulk,
> > > > > > > > > > > > > > + .felem =
> > > > rte_ring_mp_enqueue_bulk_elem,
> > > > > > > > > > > > > > + },
> > > > > > > > > > > > > > + .deq = {
> > > > > > > > > > > > > > + .flegacy = rte_ring_mc_dequeue_bulk,
> > > > > > > > > > > > > > + .felem =
> > > > rte_ring_mc_dequeue_bulk_elem,
> > > > > > > > > > > > > > + },
> > > > > > > > > > > > > > + },
> > > > > > > > > > > > > > + {
> > > > > > > > > > > > > > + .desc = "MP_RTS/MC_RTS sync mode",
> > > > > > > > > > > > > > + .api_type = TEST_RING_ELEM_BULK |
> > > > > > > > > > > > > > TEST_RING_THREAD_DEF,
> > > > > > > > > > > > > > + .create_flags = RING_F_MP_RTS_ENQ |
> > > > > > > > > > > > > > RING_F_MC_RTS_DEQ,
> > > > > > > > > > > > > > + .enq = {
> > > > > > > > > > > > > > + .flegacy = rte_ring_enqueue_bulk,
> > > > > > > > > > > > > > + .felem = rte_ring_enqueue_bulk_elem,
> > > > > > > > > > > > > > + },
> > > > > > > > > > > > > > + .deq = {
> > > > > > > > > > > > > > + .flegacy = rte_ring_dequeue_bulk,
> > > > > > > > > > > > > > + .felem = rte_ring_dequeue_bulk_elem,
> > > > > > > > > > > > > > + },
> > > > > > > > > > > > > > + },
> > > > > > > > > > > > > > + {
> > > > > > > > > > > > > > + .desc = "MP_HTS/MC_HTS sync mode",
> > > > > > > > > > > > > > + .api_type = TEST_RING_ELEM_BULK |
> > > > > > > > > > > > > > TEST_RING_THREAD_DEF,
> > > > > > > > > > > > > > + .create_flags = RING_F_MP_HTS_ENQ |
> > > > > > > > > > > > > > RING_F_MC_HTS_DEQ,
> > > > > > > > > > > > > > + .enq = {
> > > > > > > > > > > > > > + .flegacy = rte_ring_enqueue_bulk,
> > > > > > > > > > > > > > + .felem = rte_ring_enqueue_bulk_elem,
> > > > > > > > > > > > > > + },
> > > > > > > > > > > > > > + .deq = {
> > > > > > > > > > > > > > + .flegacy = rte_ring_dequeue_bulk,
> > > > > > > > > > > > > > + .felem = rte_ring_dequeue_bulk_elem,
> > > > > > > > > > > > > > + },
> > > > > > > > > > > > > > + },
> > > > > > > > > > > > > > + {
> > > > > > > > > > > > > > + .desc = "MP/MC sync mode",
> > > > > > > > > > > > > > + .api_type = TEST_RING_ELEM_BURST |
> > > > > > > > > > > > > > TEST_RING_THREAD_DEF,
> > > > > > > > > > > > > > + .create_flags = 0,
> > > > > > > > > > > > > > + .enq = {
> > > > > > > > > > > > > > + .flegacy = rte_ring_enqueue_burst,
> > > > > > > > > > > > > > + .felem =
> > > > rte_ring_enqueue_burst_elem,
> > > > > > > > > > > > > > + },
> > > > > > > > > > > > > > + .deq = {
> > > > > > > > > > > > > > + .flegacy = rte_ring_dequeue_burst,
> > > > > > > > > > > > > > + .felem =
> > > > rte_ring_dequeue_burst_elem,
> > > > > > > > > > > > > > + },
> > > > > > > > > > > > > > + },
> > > > > > > > > > > > > > + {
> > > > > > > > > > > > > > + .desc = "SP/SC sync mode",
> > > > > > > > > > > > > > + .api_type = TEST_RING_ELEM_BURST |
> > > > > > > > > > > > > > TEST_RING_THREAD_SPSC,
> > > > > > > > > > > > > > + .create_flags = RING_F_SP_ENQ |
> > > > RING_F_SC_DEQ,
> > > > > > > > > > > > > > + .enq = {
> > > > > > > > > > > > > > + .flegacy = rte_ring_sp_enqueue_burst,
> > > > > > > > > > > > > > + .felem =
> > > > rte_ring_sp_enqueue_burst_elem,
> > > > > > > > > > > > > > + },
> > > > > > > > > > > > > > + .deq = {
> > > > > > > > > > > > > > + .flegacy = rte_ring_sc_dequeue_burst,
> > > > > > > > > > > > > > + .felem =
> > > > rte_ring_sc_dequeue_burst_elem,
> > > > > > > > > > > > > > + },
> > > > > > > > > > > > > > + },
> > > > > > > > > > > > > > + {
> > > > > > > > > > > > > > + .desc = "MP/MC sync mode",
> > > > > > > > > > > > > > + .api_type = TEST_RING_ELEM_BURST |
> > > > > > > > > > > > > > TEST_RING_THREAD_MPMC,
> > > > > > > > > > > > > > + .create_flags = 0,
> > > > > > > > > > > > > > + .enq = {
> > > > > > > > > > > > > > + .flegacy =
> > > > rte_ring_mp_enqueue_burst,
> > > > > > > > > > > > > > + .felem =
> > > > rte_ring_mp_enqueue_burst_elem,
> > > > > > > > > > > > > > + },
> > > > > > > > > > > > > > + .deq = {
> > > > > > > > > > > > > > + .flegacy =
> > > > rte_ring_mc_dequeue_burst,
> > > > > > > > > > > > > > + .felem =
> > > > rte_ring_mc_dequeue_burst_elem,
> > > > > > > > > > > > > > + },
> > > > > > > > > > > > > > + },
> > > > > > > > > > > > > > + {
> > > > > > > > > > > > > > + .desc = "MP_RTS/MC_RTS sync mode",
> > > > > > > > > > > > > > + .api_type = TEST_RING_ELEM_BURST |
> > > > > > > > > > > > > > TEST_RING_THREAD_DEF,
> > > > > > > > > > > > > > + .create_flags = RING_F_MP_RTS_ENQ |
> > > > > > > > > > > > > > RING_F_MC_RTS_DEQ,
> > > > > > > > > > > > > > + .enq = {
> > > > > > > > > > > > > > + .flegacy = rte_ring_enqueue_burst,
> > > > > > > > > > > > > > + .felem =
> > > > rte_ring_enqueue_burst_elem,
> > > > > > > > > > > > > > + },
> > > > > > > > > > > > > > + .deq = {
> > > > > > > > > > > > > > + .flegacy = rte_ring_dequeue_burst,
> > > > > > > > > > > > > > + .felem =
> > > > rte_ring_dequeue_burst_elem,
> > > > > > > > > > > > > > + },
> > > > > > > > > > > > > > + },
> > > > > > > > > > > > > > + {
> > > > > > > > > > > > > > + .desc = "MP_HTS/MC_HTS sync mode",
> > > > > > > > > > > > > > + .api_type = TEST_RING_ELEM_BURST |
> > > > > > > > > > > > > > TEST_RING_THREAD_DEF,
> > > > > > > > > > > > > > + .create_flags = RING_F_MP_HTS_ENQ |
> > > > > > > > > > > > > > RING_F_MC_HTS_DEQ,
> > > > > > > > > > > > > > + .enq = {
> > > > > > > > > > > > > > + .flegacy = rte_ring_enqueue_burst,
> > > > > > > > > > > > > > + .felem =
> > > > rte_ring_enqueue_burst_elem,
> > > > > > > > > > > > > > + },
> > > > > > > > > > > > > > + .deq = {
> > > > > > > > > > > > > > + .flegacy = rte_ring_dequeue_burst,
> > > > > > > > > > > > > > + .felem =
> > > > rte_ring_dequeue_burst_elem,
> > > > > > > > > > > > > > + },
> > > > > > > > > > > > > > + },
> > > > > > > > > > > > > > +};
> > > > > > > > > > > > > > +
> > > > > > > > > > > > > > +static unsigned int test_ring_enq_impl(struct
> > > > > > > > > > > > > > +rte_ring *r, void **obj, int esize, unsigned
> > > > > > > > > > int n,
> > > > > > > > > > > > > > + unsigned int test_idx) {
> > > > > > > > > > > > > > + if (esize == -1)
> > > > > > > > > > > > > > + return
> > > > test_enqdeq_impl[test_idx].enq.flegacy(r,
> > > > > > > > > > > > > > +obj,
> > > > > > > > > > n, NULL);
> > > > > > > > > > > > > > + else
> > > > > > > > > > > > > > + return
> > > > test_enqdeq_impl[test_idx].enq.felem(r,
> > > > > > > > > > > > > > +obj,
> > > > > > > > > > esize, n,
> > > > > > > > > > > > > > + NULL);
> > > > > > > > > > > > > > +}
> > > > > > > > > > > > > > +
> > > > > > > > > > > > > > +static unsigned int test_ring_deq_impl(struct
> > > > > > > > > > > > > > +rte_ring *r, void **obj, int esize, unsigned
> > > > > > > > > > int n,
> > > > > > > > > > > > > > + unsigned int test_idx) {
> > > > > > > > > > > > > > + if (esize == -1)
> > > > > > > > > > > > > > + return
> > > > test_enqdeq_impl[test_idx].deq.flegacy(r,
> > > > > > > > > > > > > > +obj,
> > > > > > > > > > n, NULL);
> > > > > > > > > > > > > > + else
> > > > > > > > > > > > > > + return
> > > > test_enqdeq_impl[test_idx].deq.felem(r,
> > > > > > > > > > > > > > +obj,
> > > > > > > > > > esize, n,
> > > > > > > > > > > > > > + NULL);
> > > > > > > > > > > > > > +}
> > > > > > > > > > > > > > +
> > > > > > > > > > > > > > static void**
> > > > > > > > > > > > > > test_ring_inc_ptr(void **obj, int esize,
> > > > > > > > > > > > > > unsigned int
> > > > > > > > > > > > > > n) { @@
> > > > > > > > > > > > > > -203,8 +378,7 @@ test_ring_negative_tests(void)
> > > > > > > > > > > > > > * Random number of elements are enqueued and
> > > > dequeued.
> > > > > > > > > > > > > > */
> > > > > > > > > > > > > > static int
> > > > > > > > > > > > > > -test_ring_burst_bulk_tests1(unsigned int
> > > > > > > > > > > > > > api_type, unsigned int
> > > > > > > > > > > > create_flags,
> > > > > > > > > > > > > > - const char *tname)
> > > > > > > > > > > > > > +test_ring_burst_bulk_tests1(unsigned int
> > > > > > > > > > > > > > +test_idx)
> > > > > > > > > > > > > > {
> > > > > > > > > > > > > > struct rte_ring *r;
> > > > > > > > > > > > > > void **src = NULL, **cur_src = NULL, **dst =
> > > > > > > > > > > > > > NULL, **cur_dst = NULL; @@ -214,11 +388,13 @@
> > > > > > > > > > test_ring_burst_bulk_tests1(unsigned
> > > > > > > > > > > > > > int api_type, unsigned int create_flags,
> > > > > > > > > > > > > > const unsigned int rsz = RING_SIZE - 1;
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > for (i = 0; i < RTE_DIM(esize); i++) {
> > > > > > > > > > > > > > - test_ring_print_test_string(tname, api_type,
> > > > esize[i]);
> > > > > > > > > > > > > > +
> > > > > > > > > >
> > > > > > > > > > test_ring_print_test_string(test_enqdeq_impl[test_idx].d
> > > > > > > > > > esc,
> > > > > > > > > > > > > > + test_enqdeq_impl[test_idx].api_type,
> > > > esize[i]);
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > /* Create the ring */
> > > > > > > > > > > > > > r =
> > > > > > > > > > > > > > test_ring_create("test_ring_burst_bulk_tests",
> > > > > > > > esize[i],
> > > > > > > > > > > > > > - RING_SIZE,
> > > > SOCKET_ID_ANY,
> > > > > > > > > > > > > > create_flags);
> > > > > > > > > > > > > > + RING_SIZE, SOCKET_ID_ANY,
> > > > > > > > > > > > > > +
> > > > > > > > > > test_enqdeq_impl[test_idx].create_flags);
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > /* alloc dummy object pointers */
> > > > > > > > > > > > > > src = test_ring_calloc(RING_SIZE * 2,
> > > > > > > > > > > > > > esize[i]); @@
> > > > > > > > > > > > > > -240,17
> > > > > > > > > > > > > > +416,17 @@ test_ring_burst_bulk_tests1(unsigned
> > > > > > > > > > > > > > +int api_type, unsigned int
> > > > > > > > > > > > > > create_flags,
> > > > > > > > > > > > > > rand = RTE_MAX(rte_rand() %
> > > > RING_SIZE,
> > > > > > > > 1UL);
> > > > > > > > > > > > > > printf("%s: iteration %u, random
> > > > shift: %u;\n",
> > > > > > > > > > > > > > __func__, i, rand);
> > > > > > > > > > > > > > - ret = test_ring_enqueue(r, cur_src,
> > > > esize[i],
> > > > > > > > > > rand,
> > > > > > > > > > > > > > -
> > > > api_type);
> > > > > > > > > > > > > > + ret = test_ring_enq_impl(r, cur_src,
> > > > esize[i],
> > > > > > > > > > rand,
> > > > > > > > > > > > > > +
> > > > test_idx);
> > > > > > > > > > > > > > TEST_RING_VERIFY(ret != 0);
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > - ret = test_ring_dequeue(r, cur_dst,
> > > > esize[i],
> > > > > > > > > > rand,
> > > > > > > > > > > > > > -
> > > > api_type);
> > > > > > > > > > > > > > + ret = test_ring_deq_impl(r, cur_dst,
> > > > esize[i],
> > > > > > > > > > rand,
> > > > > > > > > > > > > > +
> > > > test_idx);
> > > > > > > > > > > > > > TEST_RING_VERIFY(ret == rand);
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > /* fill the ring */
> > > > > > > > > > > > > > - ret = test_ring_enqueue(r, cur_src,
> > > > esize[i],
> > > > > > rsz,
> > > > > > > > > > > > > > -
> > > > api_type);
> > > > > > > > > > > > > > + ret = test_ring_enq_impl(r, cur_src,
> > > > esize[i],
> > > > > > > > > > rsz,
> > > > > > > > > > > > > > +
> > > > test_idx);
> > > > > > > > > > > > > > TEST_RING_VERIFY(ret != 0);
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > TEST_RING_VERIFY(rte_ring_free_count(r) ==
> > > > > > > > 0); @@
> > > > > > > > > > > > > > -259,8 +435,8 @@
> > > > > > > > > > > > > > test_ring_burst_bulk_tests1(unsigned
> > > > > > > > > > > > > > int api_type, unsigned int create_flags,
> > > > > > > > > > > > > > TEST_RING_VERIFY(rte_ring_empty(r)
> > > > == 0);
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > /* empty the ring */
> > > > > > > > > > > > > > - ret = test_ring_dequeue(r, cur_dst,
> > > > esize[i],
> > > > > > rsz,
> > > > > > > > > > > > > > -
> > > > api_type);
> > > > > > > > > > > > > > + ret = test_ring_deq_impl(r, cur_dst,
> > > > esize[i],
> > > > > > > > > > rsz,
> > > > > > > > > > > > > > +
> > > > test_idx);
> > > > > > > > > > > > > > TEST_RING_VERIFY(ret == (int)rsz);
> > > > > > > > > > > > > > TEST_RING_VERIFY(rsz ==
> > > > > > > > rte_ring_free_count(r));
> > > > > > > > > > > > > > TEST_RING_VERIFY(rte_ring_count(r)
> > > > == 0);
> > > > > > > > @@ -
> > > > > > > > > > > > > > 294,8 +470,7 @@
> > > > > > > > > > > > > > test_ring_burst_bulk_tests1(unsigned
> > > > > > > > > > > > > > int api_type, unsigned int create_flags,
> > > > > > > > > > > > > > * dequeued data.
> > > > > > > > > > > > > > */
> > > > > > > > > > > > > > static int
> > > > > > > > > > > > > > -test_ring_burst_bulk_tests2(unsigned int
> > > > > > > > > > > > > > api_type, unsigned int
> > > > > > > > > > > > create_flags,
> > > > > > > > > > > > > > - const char *tname)
> > > > > > > > > > > > > > +test_ring_burst_bulk_tests2(unsigned int
> > > > > > > > > > > > > > +test_idx)
> > > > > > > > > > > > > > {
> > > > > > > > > > > > > > struct rte_ring *r;
> > > > > > > > > > > > > > void **src = NULL, **cur_src = NULL, **dst =
> > > > > > > > > > > > > > NULL, **cur_dst = NULL; @@ -303,11 +478,13 @@
> > > > > > > > > > test_ring_burst_bulk_tests2(unsigned
> > > > > > > > > > > > > > int api_type, unsigned int create_flags,
> > > > > > > > > > > > > > unsigned int i;
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > for (i = 0; i < RTE_DIM(esize); i++) {
> > > > > > > > > > > > > > - test_ring_print_test_string(tname, api_type,
> > > > esize[i]);
> > > > > > > > > > > > > > +
> > > > > > > > > >
> > > > > > > > > > test_ring_print_test_string(test_enqdeq_impl[test_idx].d
> > > > > > > > > > esc,
> > > > > > > > > > > > > > + test_enqdeq_impl[test_idx].api_type,
> > > > esize[i]);
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > /* Create the ring */
> > > > > > > > > > > > > > r =
> > > > > > > > > > > > > > test_ring_create("test_ring_burst_bulk_tests",
> > > > > > > > esize[i],
> > > > > > > > > > > > > > - RING_SIZE,
> > > > SOCKET_ID_ANY,
> > > > > > > > > > > > > > create_flags);
> > > > > > > > > > > > > > + RING_SIZE, SOCKET_ID_ANY,
> > > > > > > > > > > > > > +
> > > > > > > > > > test_enqdeq_impl[test_idx].create_flags);
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > /* alloc dummy object pointers */
> > > > > > > > > > > > > > src = test_ring_calloc(RING_SIZE * 2,
> > > > > > > > > > > > > > esize[i]); @@
> > > > > > > > > > > > > > -323,39
> > > > > > > > > > > > > > +500,39 @@ test_ring_burst_bulk_tests2(unsigned
> > > > > > > > > > > > > > +int api_type, unsigned int
> > > > > > > > > > > > > > create_flags,
> > > > > > > > > > > > > > cur_dst = dst;
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > printf("enqueue 1 obj\n");
> > > > > > > > > > > > > > - ret = test_ring_enqueue(r, cur_src, esize[i], 1,
> > > > > > > > > > api_type);
> > > > > > > > > > > > > > + ret = test_ring_enq_impl(r, cur_src,
> > > > > > > > > > > > > > +esize[i], 1,
> > > > > > > > > > test_idx);
> > > > > > > > > > > > > > if (ret != 1)
> > > > > > > > > > > > > > goto fail;
> > > > > > > > > > > > > > cur_src = test_ring_inc_ptr(cur_src,
> > > > > > > > > > > > > > esize[i], 1);
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > printf("enqueue 2 objs\n");
> > > > > > > > > > > > > > - ret = test_ring_enqueue(r, cur_src, esize[i], 2,
> > > > > > > > > > api_type);
> > > > > > > > > > > > > > + ret = test_ring_enq_impl(r, cur_src,
> > > > > > > > > > > > > > +esize[i], 2,
> > > > > > > > > > test_idx);
> > > > > > > > > > > > > > if (ret != 2)
> > > > > > > > > > > > > > goto fail;
> > > > > > > > > > > > > > cur_src = test_ring_inc_ptr(cur_src,
> > > > > > > > > > > > > > esize[i], 2);
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > printf("enqueue MAX_BULK objs\n");
> > > > > > > > > > > > > > - ret = test_ring_enqueue(r, cur_src, esize[i],
> > > > > > > > > > MAX_BULK,
> > > > > > > > > > > > > > - api_type);
> > > > > > > > > > > > > > + ret = test_ring_enq_impl(r, cur_src,
> > > > > > > > > > > > > > +esize[i],
> > > > > > > > > > MAX_BULK,
> > > > > > > > > > > > > > + test_idx);
> > > > > > > > > > > > > > if (ret != MAX_BULK)
> > > > > > > > > > > > > > goto fail;
> > > > > > > > > > > > > > cur_src = test_ring_inc_ptr(cur_src,
> > > > > > > > > > > > > > esize[i],
> > > > > > > > MAX_BULK);
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > printf("dequeue 1 obj\n");
> > > > > > > > > > > > > > - ret = test_ring_dequeue(r, cur_dst, esize[i], 1,
> > > > > > > > > > api_type);
> > > > > > > > > > > > > > + ret = test_ring_deq_impl(r, cur_dst,
> > > > > > > > > > > > > > +esize[i], 1,
> > > > > > > > > > test_idx);
> > > > > > > > > > > > > > if (ret != 1)
> > > > > > > > > > > > > > goto fail;
> > > > > > > > > > > > > > cur_dst = test_ring_inc_ptr(cur_dst,
> > > > > > > > > > > > > > esize[i], 1);
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > printf("dequeue 2 objs\n");
> > > > > > > > > > > > > > - ret = test_ring_dequeue(r, cur_dst, esize[i], 2,
> > > > > > > > > > api_type);
> > > > > > > > > > > > > > + ret = test_ring_deq_impl(r, cur_dst,
> > > > > > > > > > > > > > +esize[i], 2,
> > > > > > > > > > test_idx);
> > > > > > > > > > > > > > if (ret != 2)
> > > > > > > > > > > > > > goto fail;
> > > > > > > > > > > > > > cur_dst = test_ring_inc_ptr(cur_dst,
> > > > > > > > > > > > > > esize[i], 2);
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > printf("dequeue MAX_BULK objs\n");
> > > > > > > > > > > > > > - ret = test_ring_dequeue(r, cur_dst, esize[i],
> > > > > > > > > > MAX_BULK,
> > > > > > > > > > > > > > - api_type);
> > > > > > > > > > > > > > + ret = test_ring_deq_impl(r, cur_dst,
> > > > > > > > > > > > > > +esize[i],
> > > > > > > > > > MAX_BULK,
> > > > > > > > > > > > > > + test_idx);
> > > > > > > > > > > > > > if (ret != MAX_BULK)
> > > > > > > > > > > > > > goto fail;
> > > > > > > > > > > > > > cur_dst = test_ring_inc_ptr(cur_dst,
> > > > > > > > > > > > > > esize[i],
> > > > > > > > MAX_BULK);
> > > > > > > > > > > > > > @@
> > > > > > > > > > > > > > -390,8 +567,7 @@
> > > > > > > > > > > > > > test_ring_burst_bulk_tests2(unsigned
> > > > > > > > > > > > > > int api_type, unsigned int create_flags,
> > > > > > > > > > > > > > * Enqueue and dequeue to cover the entire ring length.
> > > > > > > > > > > > > > */
> > > > > > > > > > > > > > static int
> > > > > > > > > > > > > > -test_ring_burst_bulk_tests3(unsigned int
> > > > > > > > > > > > > > api_type, unsigned int
> > > > > > > > > > > > create_flags,
> > > > > > > > > > > > > > - const char *tname)
> > > > > > > > > > > > > > +test_ring_burst_bulk_tests3(unsigned int
> > > > > > > > > > > > > > +test_idx)
> > > > > > > > > > > > > > {
> > > > > > > > > > > > > > struct rte_ring *r;
> > > > > > > > > > > > > > void **src = NULL, **cur_src = NULL, **dst =
> > > > > > > > > > > > > > NULL, **cur_dst = NULL; @@ -399,11 +575,13 @@
> > > > > > > > > > test_ring_burst_bulk_tests3(unsigned
> > > > > > > > > > > > > > int api_type, unsigned int create_flags,
> > > > > > > > > > > > > > unsigned int i, j;
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > for (i = 0; i < RTE_DIM(esize); i++) {
> > > > > > > > > > > > > > - test_ring_print_test_string(tname, api_type,
> > > > esize[i]);
> > > > > > > > > > > > > > +
> > > > > > > > > >
> > > > > > > > > > test_ring_print_test_string(test_enqdeq_impl[test_idx].d
> > > > > > > > > > esc,
> > > > > > > > > > > > > > + test_enqdeq_impl[test_idx].api_type,
> > > > esize[i]);
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > /* Create the ring */
> > > > > > > > > > > > > > r =
> > > > > > > > > > > > > > test_ring_create("test_ring_burst_bulk_tests",
> > > > > > > > esize[i],
> > > > > > > > > > > > > > - RING_SIZE,
> > > > SOCKET_ID_ANY,
> > > > > > > > > > > > > > create_flags);
> > > > > > > > > > > > > > + RING_SIZE, SOCKET_ID_ANY,
> > > > > > > > > > > > > > +
> > > > > > > > > > test_enqdeq_impl[test_idx].create_flags);
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > /* alloc dummy object pointers */
> > > > > > > > > > > > > > src = test_ring_calloc(RING_SIZE * 2,
> > > > > > > > > > > > > > esize[i]); @@
> > > > > > > > > > > > > > -420,15
> > > > > > > > > > > > > > +598,15 @@ test_ring_burst_bulk_tests3(unsigned
> > > > > > > > > > > > > > +int api_type, unsigned int
> > > > > > > > > > > > > > create_flags,
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > printf("fill and empty the ring\n");
> > > > > > > > > > > > > > for (j = 0; j < RING_SIZE / MAX_BULK; j++) {
> > > > > > > > > > > > > > - ret = test_ring_enqueue(r, cur_src,
> > > > esize[i],
> > > > > > > > > > > > > > MAX_BULK,
> > > > > > > > > > > > > > -
> > > > api_type);
> > > > > > > > > > > > > > + ret = test_ring_enq_impl(r, cur_src,
> > > > esize[i],
> > > > > > > > > > > > > > MAX_BULK,
> > > > > > > > > > > > > > +
> > > > test_idx);
> > > > > > > > > > > > > > if (ret != MAX_BULK)
> > > > > > > > > > > > > > goto fail;
> > > > > > > > > > > > > > cur_src = test_ring_inc_ptr(cur_src,
> > > > esize[i],
> > > > > > > > > > > > > >
> > > > > > > > MAX_BULK);
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > - ret = test_ring_dequeue(r, cur_dst,
> > > > esize[i],
> > > > > > > > > > > > > > MAX_BULK,
> > > > > > > > > > > > > > -
> > > > api_type);
> > > > > > > > > > > > > > + ret = test_ring_deq_impl(r, cur_dst,
> > > > esize[i],
> > > > > > > > > > > > > > MAX_BULK,
> > > > > > > > > > > > > > +
> > > > test_idx);
> > > > > > > > > > > > > > if (ret != MAX_BULK)
> > > > > > > > > > > > > > goto fail;
> > > > > > > > > > > > > > cur_dst = test_ring_inc_ptr(cur_dst,
> > > > esize[i],
> > > > > > > > @@ -
> > > > > > > > > > > > > > 465,21 +643,24 @@
> > > > > > > > > > > > > > test_ring_burst_bulk_tests3(unsigned
> > > > > > > > > > > > > > int api_type, unsigned int create_flags,
> > > > > > > > > > > > > > * Enqueue till the ring is full and dequeue
> > > > > > > > > > > > > > till the ring becomes
> > > > > > > > empty.
> > > > > > > > > > > > > > */
> > > > > > > > > > > > > > static int
> > > > > > > > > > > > > > -test_ring_burst_bulk_tests4(unsigned int
> > > > > > > > > > > > > > api_type, unsigned int
> > > > > > > > > > > > create_flags,
> > > > > > > > > > > > > > - const char *tname)
> > > > > > > > > > > > > > +test_ring_burst_bulk_tests4(unsigned int
> > > > > > > > > > > > > > +test_idx)
> > > > > > > > > > > > > > {
> > > > > > > > > > > > > > struct rte_ring *r;
> > > > > > > > > > > > > > void **src = NULL, **cur_src = NULL, **dst =
> > > > > > > > > > > > > > NULL, **cur_dst
> > > > > > > > = NULL;
> > > > > > > > > > > > > > int ret;
> > > > > > > > > > > > > > unsigned int i, j;
> > > > > > > > > > > > > > - unsigned int num_elems;
> > > > > > > > > > > > > > + unsigned int api_type, num_elems;
> > > > > > > > > > > > > > +
> > > > > > > > > > > > > > + api_type =
> > > > > > > > > > > > > > +test_enqdeq_impl[test_idx].api_type;
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > for (i = 0; i < RTE_DIM(esize); i++) {
> > > > > > > > > > > > > > - test_ring_print_test_string(tname, api_type,
> > > > esize[i]);
> > > > > > > > > > > > > > +
> > > > > > > > > >
> > > > > > > > > > test_ring_print_test_string(test_enqdeq_impl[test_idx].d
> > > > > > > > > > esc,
> > > > > > > > > > > > > > + test_enqdeq_impl[test_idx].api_type,
> > > > esize[i]);
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > /* Create the ring */
> > > > > > > > > > > > > > r =
> > > > > > > > > > > > > > test_ring_create("test_ring_burst_bulk_tests",
> > > > > > > > esize[i],
> > > > > > > > > > > > > > - RING_SIZE,
> > > > SOCKET_ID_ANY,
> > > > > > > > > > > > > > create_flags);
> > > > > > > > > > > > > > + RING_SIZE, SOCKET_ID_ANY,
> > > > > > > > > > > > > > +
> > > > > > > > > > test_enqdeq_impl[test_idx].create_flags);
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > /* alloc dummy object pointers */
> > > > > > > > > > > > > > src = test_ring_calloc(RING_SIZE * 2,
> > > > > > > > > > > > > > esize[i]); @@
> > > > > > > > > > > > > > -496,8
> > > > > > > > > > > > > > +677,8 @@ test_ring_burst_bulk_tests4(unsigned
> > > > > > > > > > > > > > +int api_type, unsigned int
> > > > > > > > > > > > > > create_flags,
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > printf("Test enqueue without enough memory
> > > > > > > > space\n");
> > > > > > > > > > > > > > for (j = 0; j < (RING_SIZE/MAX_BULK - 1);
> > > > > > > > > > > > > > j++)
> > > > {
> > > > > > > > > > > > > > - ret = test_ring_enqueue(r, cur_src,
> > > > esize[i],
> > > > > > > > > > > > > > MAX_BULK,
> > > > > > > > > > > > > > -
> > > > api_type);
> > > > > > > > > > > > > > + ret = test_ring_enq_impl(r, cur_src,
> > > > esize[i],
> > > > > > > > > > > > > > MAX_BULK,
> > > > > > > > > > > > > > +
> > > > test_idx);
> > > > > > > > > > > > > > if (ret != MAX_BULK)
> > > > > > > > > > > > > > goto fail;
> > > > > > > > > > > > > > cur_src = test_ring_inc_ptr(cur_src,
> > > > esize[i],
> > > > > > > > @@ -
> > > > > > > > > > > > > > 505,7 +686,7 @@
> > > > > > > > > > > > > > test_ring_burst_bulk_tests4(unsigned
> > > > > > > > > > > > > > int api_type, unsigned int create_flags,
> > > > > > > > > > > > > > }
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > printf("Enqueue 2 objects, free entries =
> > > > > > > > > > > > > > MAX_BULK -
> > > > > > > > 2\n");
> > > > > > > > > > > > > > - ret = test_ring_enqueue(r, cur_src, esize[i], 2,
> > > > > > > > > > api_type);
> > > > > > > > > > > > > > + ret = test_ring_enq_impl(r, cur_src,
> > > > > > > > > > > > > > +esize[i], 2,
> > > > > > > > > > test_idx);
> > > > > > > > > > > > > > if (ret != 2)
> > > > > > > > > > > > > > goto fail;
> > > > > > > > > > > > > > cur_src = test_ring_inc_ptr(cur_src,
> > > > > > > > > > > > > > esize[i], 2); @@
> > > > > > > > > > > > > > -517,8
> > > > > > > > > > > > > > +698,8 @@ test_ring_burst_bulk_tests4(unsigned
> > > > > > > > > > > > > > +int api_type, unsigned int
> > > > > > > > > > > > > > create_flags,
> > > > > > > > > > > > > > else
> > > > > > > > > > > > > > num_elems = MAX_BULK;
> > > > > > > > > > > > > > /* Always one free entry left */
> > > > > > > > > > > > > > - ret = test_ring_enqueue(r, cur_src, esize[i],
> > > > > > > > > > num_elems,
> > > > > > > > > > > > > > - api_type);
> > > > > > > > > > > > > > + ret = test_ring_enq_impl(r, cur_src,
> > > > > > > > > > > > > > +esize[i],
> > > > > > > > > > num_elems,
> > > > > > > > > > > > > > + test_idx);
> > > > > > > > > > > > > > if (ret != MAX_BULK - 3)
> > > > > > > > > > > > > > goto fail;
> > > > > > > > > > > > > > cur_src = test_ring_inc_ptr(cur_src,
> > > > > > > > > > > > > > esize[i],
> > > > > > > > MAX_BULK -
> > > > > > > > > > > > > > 3);
> > > > > > > > > > > > @@
> > > > > > > > > > > > > > -528,15 +709,15 @@
> > > > > > > > > > > > > > test_ring_burst_bulk_tests4(unsigned
> > > > > > > > > > > > > > int api_type, unsigned int create_flags,
> > > > > > > > > > > > > > goto fail;
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > printf("Test enqueue for a full entry\n");
> > > > > > > > > > > > > > - ret = test_ring_enqueue(r, cur_src, esize[i],
> > > > > > > > > > MAX_BULK,
> > > > > > > > > > > > > > - api_type);
> > > > > > > > > > > > > > + ret = test_ring_enq_impl(r, cur_src,
> > > > > > > > > > > > > > +esize[i],
> > > > > > > > > > MAX_BULK,
> > > > > > > > > > > > > > + test_idx);
> > > > > > > > > > > > > > if (ret != 0)
> > > > > > > > > > > > > > goto fail;
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > printf("Test dequeue without enough
> > > > objects\n");
> > > > > > > > > > > > > > for (j = 0; j < RING_SIZE / MAX_BULK - 1; j++) {
> > > > > > > > > > > > > > - ret = test_ring_dequeue(r, cur_dst,
> > > > esize[i],
> > > > > > > > > > > > > > MAX_BULK,
> > > > > > > > > > > > > > -
> > > > api_type);
> > > > > > > > > > > > > > + ret = test_ring_deq_impl(r, cur_dst,
> > > > esize[i],
> > > > > > > > > > > > > > MAX_BULK,
> > > > > > > > > > > > > > +
> > > > test_idx);
> > > > > > > > > > > > > > if (ret != MAX_BULK)
> > > > > > > > > > > > > > goto fail;
> > > > > > > > > > > > > > cur_dst = test_ring_inc_ptr(cur_dst,
> > > > esize[i],
> > > > > > > > @@ -
> > > > > > > > > > > > > > 544,7 +725,7 @@
> > > > > > > > > > > > > > test_ring_burst_bulk_tests4(unsigned
> > > > > > > > > > > > > > int api_type, unsigned int create_flags,
> > > > > > > > > > > > > > }
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > /* Available memory space for the exact
> > > > MAX_BULK
> > > > > > > > entries
> > > > > > > > > > > > */
> > > > > > > > > > > > > > - ret = test_ring_dequeue(r, cur_dst, esize[i], 2,
> > > > > > > > > > api_type);
> > > > > > > > > > > > > > + ret = test_ring_deq_impl(r, cur_dst,
> > > > > > > > > > > > > > +esize[i], 2,
> > > > > > > > > > test_idx);
> > > > > > > > > > > > > > if (ret != 2)
> > > > > > > > > > > > > > goto fail;
> > > > > > > > > > > > > > cur_dst = test_ring_inc_ptr(cur_dst,
> > > > > > > > > > > > > > esize[i], 2); @@
> > > > > > > > > > > > > > -554,8
> > > > > > > > > > > > > > +735,8 @@ test_ring_burst_bulk_tests4(unsigned
> > > > > > > > > > > > > > +int api_type, unsigned int
> > > > > > > > > > > > > > create_flags,
> > > > > > > > > > > > > > num_elems = MAX_BULK - 3;
> > > > > > > > > > > > > > else
> > > > > > > > > > > > > > num_elems = MAX_BULK;
> > > > > > > > > > > > > > - ret = test_ring_dequeue(r, cur_dst, esize[i],
> > > > > > > > > > num_elems,
> > > > > > > > > > > > > > - api_type);
> > > > > > > > > > > > > > + ret = test_ring_deq_impl(r, cur_dst,
> > > > > > > > > > > > > > +esize[i],
> > > > > > > > > > num_elems,
> > > > > > > > > > > > > > + test_idx);
> > > > > > > > > > > > > > if (ret != MAX_BULK - 3)
> > > > > > > > > > > > > > goto fail;
> > > > > > > > > > > > > > cur_dst = test_ring_inc_ptr(cur_dst,
> > > > > > > > > > > > > > esize[i],
> > > > > > > > MAX_BULK -
> > > > > > > > > > > > > > 3);
> > > > > > > > > > > > @@
> > > > > > > > > > > > > > -816,22 +997,7 @@ static int
> > > > > > > > > > > > > > test_ring(void) {
> > > > > > > > > > > > > > int32_t rc;
> > > > > > > > > > > > > > - unsigned int i, j;
> > > > > > > > > > > > > > - const char *tname;
> > > > > > > > > > > > > > -
> > > > > > > > > > > > > > - static const struct {
> > > > > > > > > > > > > > - uint32_t create_flags;
> > > > > > > > > > > > > > - const char *name;
> > > > > > > > > > > > > > - } test_sync_modes[] = {
> > > > > > > > > > > > > > - {
> > > > > > > > > > > > > > - RING_F_MP_RTS_ENQ |
> > > > > > > > > > RING_F_MC_RTS_DEQ,
> > > > > > > > > > > > > > - "Test MT_RTS ring",
> > > > > > > > > > > > > > - },
> > > > > > > > > > > > > > - {
> > > > > > > > > > > > > > - RING_F_MP_HTS_ENQ |
> > > > > > > > > > RING_F_MC_HTS_DEQ,
> > > > > > > > > > > > > > - "Test MT_HTS ring",
> > > > > > > > > > > > > > - },
> > > > > > > > > > > > > > - };
> > > > > > > > > > > > > > + unsigned int i;
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > /* Negative test cases */
> > > > > > > > > > > > > > if (test_ring_negative_tests() < 0) @@ -848,65
> > > > > > > > > > > > > > +1014,24 @@
> > > > > > > > > > > > > > test_ring(void)
> > > > > > > > > > > > > > * The test cases are split into smaller test cases to
> > > > > > > > > > > > > > * help clang compile faster.
> > > > > > > > > > > > > > */
> > > > > > > > > > > > > > - tname = "Test standard ring";
> > > > > > > > > > > > > > -
> > > > > > > > > > > > > > - for (j = TEST_RING_ELEM_BULK; j <=
> > > > > > TEST_RING_ELEM_BURST;
> > > > > > > > > > j <<= 1)
> > > > > > > > > > > > > > - for (i = TEST_RING_THREAD_DEF;
> > > > > > > > > > > > > > - i <=
> > > > > > > > > > TEST_RING_THREAD_MPMC; i
> > > > > > > > > > > > > > <<= 1)
> > > > > > > > > > > > > > - if (test_ring_burst_bulk_tests1(i | j, 0,
> > > > tname)
> > > > > > > > > > < 0)
> > > > > > > > > > > > > > - goto test_fail;
> > > > > > > > > > > > > > -
> > > > > > > > > > > > > > - for (j = TEST_RING_ELEM_BULK; j <=
> > > > > > TEST_RING_ELEM_BURST;
> > > > > > > > > > j <<= 1)
> > > > > > > > > > > > > > - for (i = TEST_RING_THREAD_DEF;
> > > > > > > > > > > > > > - i <=
> > > > > > > > > > TEST_RING_THREAD_MPMC; i
> > > > > > > > > > > > > > <<= 1)
> > > > > > > > > > > > > > - if (test_ring_burst_bulk_tests2(i | j, 0,
> > > > tname)
> > > > > > > > > > < 0)
> > > > > > > > > > > > > > - goto test_fail;
> > > > > > > > > > > > > > -
> > > > > > > > > > > > > > - for (j = TEST_RING_ELEM_BULK; j <=
> > > > > > TEST_RING_ELEM_BURST;
> > > > > > > > > > j <<= 1)
> > > > > > > > > > > > > > - for (i = TEST_RING_THREAD_DEF;
> > > > > > > > > > > > > > - i <=
> > > > > > > > > > TEST_RING_THREAD_MPMC; i
> > > > > > > > > > > > > > <<= 1)
> > > > > > > > > > > > > > - if (test_ring_burst_bulk_tests3(i | j, 0,
> > > > tname)
> > > > > > > > > > < 0)
> > > > > > > > > > > > > > - goto test_fail;
> > > > > > > > > > > > > > -
> > > > > > > > > > > > > > - for (j = TEST_RING_ELEM_BULK; j <=
> > > > > > TEST_RING_ELEM_BURST;
> > > > > > > > > > j <<= 1)
> > > > > > > > > > > > > > - for (i = TEST_RING_THREAD_DEF;
> > > > > > > > > > > > > > - i <=
> > > > > > > > > > TEST_RING_THREAD_MPMC; i
> > > > > > > > > > > > > > <<= 1)
> > > > > > > > > > > > > > - if (test_ring_burst_bulk_tests4(i | j, 0,
> > > > tname)
> > > > > > > > > > < 0)
> > > > > > > > > > > > > > - goto test_fail;
> > > > > > > > > > > > > > -
> > > > > > > > > > > > > > - /* Burst and bulk operations with MT_RTS and
> > > > MT_HTS sync
> > > > > > > > > > modes
> > > > > > > > > > > > > > */
> > > > > > > > > > > > > > - for (i = 0; i != RTE_DIM(test_sync_modes); i++) {
> > > > > > > > > > > > > > - for (j = TEST_RING_ELEM_BULK; j <=
> > > > > > > > > > TEST_RING_ELEM_BURST;
> > > > > > > > > > > > > > - j <<= 1) {
> > > > > > > > > > > > > > -
> > > > > > > > > > > > > > - rc = test_ring_burst_bulk_tests1(
> > > > > > > > > > > > > > - TEST_RING_THREAD_DEF | j,
> > > > > > > > > > > > > > -
> > > > test_sync_modes[i].create_flags,
> > > > > > > > > > > > > > - test_sync_modes[i].name);
> > > > > > > > > > > > > > - if (rc < 0)
> > > > > > > > > > > > > > - goto test_fail;
> > > > > > > > > > > > > > -
> > > > > > > > > > > > > > - rc = test_ring_burst_bulk_tests2(
> > > > > > > > > > > > > > - TEST_RING_THREAD_DEF | j,
> > > > > > > > > > > > > > -
> > > > test_sync_modes[i].create_flags,
> > > > > > > > > > > > > > - test_sync_modes[i].name);
> > > > > > > > > > > > > > - if (rc < 0)
> > > > > > > > > > > > > > - goto test_fail;
> > > > > > > > > > > > > > -
> > > > > > > > > > > > > > - rc = test_ring_burst_bulk_tests3(
> > > > > > > > > > > > > > - TEST_RING_THREAD_DEF | j,
> > > > > > > > > > > > > > -
> > > > test_sync_modes[i].create_flags,
> > > > > > > > > > > > > > - test_sync_modes[i].name);
> > > > > > > > > > > > > > - if (rc < 0)
> > > > > > > > > > > > > > - goto test_fail;
> > > > > > > > > > > > > > -
> > > > > > > > > > > > > > - rc = test_ring_burst_bulk_tests3(
> > > > > > > > > > > > > > - TEST_RING_THREAD_DEF | j,
> > > > > > > > > > > > > > -
> > > > test_sync_modes[i].create_flags,
> > > > > > > > > > > > > > - test_sync_modes[i].name);
> > > > > > > > > > > > > > - if (rc < 0)
> > > > > > > > > > > > > > - goto test_fail;
> > > > > > > > > > > > > > - }
> > > > > > > > > > > > > > + for (i = 0; i != RTE_DIM(test_enqdeq_impl);
> > > > > > > > > > > > > > +i++) {
> > > > > > > > > > > > > > +
> > > > > > > > > > > > > > +
> > > > > > > > > > > > > > + rc = test_ring_burst_bulk_tests1(i);
> > > > > > > > > > > > > > + if (rc < 0)
> > > > > > > > > > > > > > + goto test_fail;
> > > > > > > > > > > > > > +
> > > > > > > > > > > > > > + rc = test_ring_burst_bulk_tests2(i);
> > > > > > > > > > > > > > + if (rc < 0)
> > > > > > > > > > > > > > + goto test_fail;
> > > > > > > > > > > > > > +
> > > > > > > > > > > > > > + rc = test_ring_burst_bulk_tests3(i);
> > > > > > > > > > > > > > + if (rc < 0)
> > > > > > > > > > > > > > + goto test_fail;
> > > > > > > > > > > > > > +
> > > > > > > > > > > > > > + rc = test_ring_burst_bulk_tests4(i);
> > > > > > > > > > > > > > + if (rc < 0)
> > > > > > > > > > > > > > + goto test_fail;
> > > > > > > > > > > > > > }
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > /* dump the ring status */
> > > > > > > > > > > > > > --
> > > > > > > > > > > > > > 2.17.1
next prev parent reply other threads:[~2020-05-13 11:20 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-29 17:57 Konstantin Ananyev
2020-04-29 18:19 ` Honnappa Nagarahalli
2020-04-29 22:10 ` Aaron Conole
2020-04-30 1:57 ` Honnappa Nagarahalli
2020-04-30 14:43 ` Ananyev, Konstantin
2020-05-01 17:48 ` Honnappa Nagarahalli
2020-05-05 11:59 ` Ananyev, Konstantin
2020-05-05 14:17 ` Honnappa Nagarahalli
2020-05-05 14:27 ` Ananyev, Konstantin
2020-05-05 18:13 ` Honnappa Nagarahalli
2020-05-05 18:57 ` Ananyev, Konstantin
2020-05-08 5:32 ` Honnappa Nagarahalli
2020-05-08 10:04 ` Ananyev, Konstantin
2020-05-09 0:33 ` Honnappa Nagarahalli
2020-05-11 11:35 ` Ananyev, Konstantin
2020-05-13 0:55 ` Honnappa Nagarahalli
2020-05-13 11:20 ` Ananyev, Konstantin [this message]
2020-05-04 9:03 ` Thomas Monjalon
2020-07-02 20:47 ` Honnappa Nagarahalli
2020-07-03 10:29 ` David Marchand
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=BYAPR11MB3301C68781FF8E4C372E48E09ABF0@BYAPR11MB3301.namprd11.prod.outlook.com \
--to=konstantin.ananyev@intel.com \
--cc=Honnappa.Nagarahalli@arm.com \
--cc=aconole@redhat.com \
--cc=dev@dpdk.org \
--cc=nd@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).