From: "Xing, Beilei" <beilei.xing@intel.com>
To: "Cui, LunyuanX" <lunyuanx.cui@intel.com>, "dev@dpdk.org" <dev@dpdk.org>
Cc: "Yang, Qiming" <qiming.yang@intel.com>,
"Wu, Jingjing" <jingjing.wu@intel.com>
Subject: Re: [dpdk-dev] [PATCH v7] net/i40e: enable MAC address as FDIR input set
Date: Thu, 2 Apr 2020 08:25:16 +0000 [thread overview]
Message-ID: <BYAPR11MB35417002A5ECF063BF9A938FF7C60@BYAPR11MB3541.namprd11.prod.outlook.com> (raw)
In-Reply-To: <20200402075847.10701-1-lunyuanx.cui@intel.com>
> -----Original Message-----
> From: Cui, LunyuanX <lunyuanx.cui@intel.com>
> Sent: Thursday, April 2, 2020 3:59 PM
> To: dev@dpdk.org
> Cc: Xing, Beilei <beilei.xing@intel.com>; Yang, Qiming
> <qiming.yang@intel.com>; Wu, Jingjing <jingjing.wu@intel.com>; Cui,
> LunyuanX <lunyuanx.cui@intel.com>
> Subject: [PATCH v7] net/i40e: enable MAC address as FDIR input set
>
> Enable source MAC address and destination MAC address as FDIR's input set
> for ipv4-other, ipv4-udp and ipv4-tcp. When OVS-DPDK is working as a pure
> L2 switch, enable MAC address as FDIR input set with Mark+RSS action would
> help the performance speed up. And FVL FDIR supports to change input set
> with MAC address.
>
> Signed-off-by: Lunyuan Cui <lunyuanx.cui@intel.com>
>
> ---
> v7:
> - Change commit message and error info
> v6:
> - Change commit message
> v5:
> - Change error info
> v4:
> - Enable MAC address as FDIR's input set for ipv4-udp and ipv4-tcp
> v3:
> - Enable MAC address as FDIR's input set
> v2:
> - Enable src MAC address as FDIR's input set
> ---
> doc/guides/rel_notes/release_20_05.rst | 6 ++
> drivers/net/i40e/i40e_ethdev.c | 3 +
> drivers/net/i40e/i40e_ethdev.h | 9 +-
> drivers/net/i40e/i40e_fdir.c | 6 ++
> drivers/net/i40e/i40e_flow.c | 131 +++++++++++++++++--------
> 5 files changed, 114 insertions(+), 41 deletions(-)
>
> diff --git a/doc/guides/rel_notes/release_20_05.rst
> b/doc/guides/rel_notes/release_20_05.rst
> index 000bbf501..65f76f001 100644
> --- a/doc/guides/rel_notes/release_20_05.rst
> +++ b/doc/guides/rel_notes/release_20_05.rst
> @@ -62,6 +62,12 @@ New Features
>
> * Added support for matching on IPv4 Time To Live and IPv6 Hop Limit.
>
> +* **Updated Intel i40e driver.**
> +
> + Updated i40e PMD with new features and improvements, including:
> +
> + * Enable MAC address as FDIR input set for ipv4-other, ipv4-udp and ipv4-
> tcp.
> +
>
> Removed Items
> -------------
> diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
> index 9539b0470..530908b0e 100644
> --- a/drivers/net/i40e/i40e_ethdev.c
> +++ b/drivers/net/i40e/i40e_ethdev.c
> @@ -9342,6 +9342,7 @@ i40e_get_valid_input_set(enum i40e_filter_pctype
> pctype,
> I40E_INSET_IPV4_TOS | I40E_INSET_IPV4_PROTO |
> I40E_INSET_IPV4_TTL,
> [I40E_FILTER_PCTYPE_NONF_IPV4_UDP] =
> + I40E_INSET_DMAC | I40E_INSET_SMAC |
> I40E_INSET_VLAN_OUTER | I40E_INSET_VLAN_INNER |
> I40E_INSET_IPV4_SRC | I40E_INSET_IPV4_DST |
> I40E_INSET_IPV4_TOS | I40E_INSET_IPV4_TTL | @@ -9357,6
> +9358,7 @@ i40e_get_valid_input_set(enum i40e_filter_pctype pctype,
> I40E_INSET_IPV4_TOS | I40E_INSET_IPV4_TTL |
> I40E_INSET_SRC_PORT | I40E_INSET_DST_PORT,
> [I40E_FILTER_PCTYPE_NONF_IPV4_TCP] =
> + I40E_INSET_DMAC | I40E_INSET_SMAC |
> I40E_INSET_VLAN_OUTER | I40E_INSET_VLAN_INNER |
> I40E_INSET_IPV4_SRC | I40E_INSET_IPV4_DST |
> I40E_INSET_IPV4_TOS | I40E_INSET_IPV4_TTL | @@ -9373,6
> +9375,7 @@ i40e_get_valid_input_set(enum i40e_filter_pctype pctype,
> I40E_INSET_SRC_PORT | I40E_INSET_DST_PORT |
> I40E_INSET_SCTP_VT,
> [I40E_FILTER_PCTYPE_NONF_IPV4_OTHER] =
> + I40E_INSET_DMAC | I40E_INSET_SMAC |
> I40E_INSET_VLAN_OUTER | I40E_INSET_VLAN_INNER |
> I40E_INSET_IPV4_SRC | I40E_INSET_IPV4_DST |
> I40E_INSET_IPV4_TOS | I40E_INSET_IPV4_PROTO | diff --git
> a/drivers/net/i40e/i40e_ethdev.h b/drivers/net/i40e/i40e_ethdev.h index
> aac89de91..dbb5d594a 100644
> --- a/drivers/net/i40e/i40e_ethdev.h
> +++ b/drivers/net/i40e/i40e_ethdev.h
> @@ -544,12 +544,19 @@ struct i40e_ipv6_l2tpv3oip_flow {
> uint32_t session_id; /* Session ID in big endian. */ };
>
> +/* A structure used to define the input for l2 dst type flow */ struct
> +i40e_l2_flow {
> + struct rte_ether_addr dst;
> + struct rte_ether_addr src;
> + uint16_t ether_type; /**< Ether type in big endian */
> +};
> +
> /*
> * A union contains the inputs for all types of flow
> * items in flows need to be in big endian
> */
> union i40e_fdir_flow {
> - struct rte_eth_l2_flow l2_flow;
> + struct i40e_l2_flow l2_flow;
> struct rte_eth_udpv4_flow udp4_flow;
> struct rte_eth_tcpv4_flow tcp4_flow;
> struct rte_eth_sctpv4_flow sctp4_flow;
> diff --git a/drivers/net/i40e/i40e_fdir.c b/drivers/net/i40e/i40e_fdir.c index
> 931f25976..2f24615b6 100644
> --- a/drivers/net/i40e/i40e_fdir.c
> +++ b/drivers/net/i40e/i40e_fdir.c
> @@ -1062,7 +1062,13 @@ i40e_flow_fdir_fill_eth_ip_head(struct i40e_pf
> *pf,
> [I40E_FILTER_PCTYPE_NONF_IPV6_OTHER] = IPPROTO_NONE,
> };
>
> + rte_memcpy(raw_pkt, &fdir_input->flow.l2_flow.dst,
> + sizeof(struct rte_ether_addr));
> + rte_memcpy(raw_pkt + sizeof(struct rte_ether_addr),
> + &fdir_input->flow.l2_flow.src,
> + sizeof(struct rte_ether_addr));
> raw_pkt += 2 * sizeof(struct rte_ether_addr);
> +
> if (vlan && fdir_input->flow_ext.vlan_tci) {
> rte_memcpy(raw_pkt, vlan_frame, sizeof(vlan_frame));
> rte_memcpy(raw_pkt + sizeof(uint16_t), diff --git
> a/drivers/net/i40e/i40e_flow.c b/drivers/net/i40e/i40e_flow.c index
> d877ac250..b1861a7db 100644
> --- a/drivers/net/i40e/i40e_flow.c
> +++ b/drivers/net/i40e/i40e_flow.c
> @@ -2626,8 +2626,24 @@ i40e_flow_parse_fdir_pattern(struct rte_eth_dev
> *dev,
> }
>
> if (eth_spec && eth_mask) {
> - if (!rte_is_zero_ether_addr(ð_mask->src)
> ||
> - !rte_is_zero_ether_addr(ð_mask->dst))
> {
> + if (rte_is_broadcast_ether_addr(ð_mask-
> >dst) &&
> + rte_is_zero_ether_addr(ð_mask-
> >src)) {
> + filter->input.flow.l2_flow.dst =
> + eth_spec->dst;
> + input_set |= I40E_INSET_DMAC;
> + } else if (rte_is_zero_ether_addr(ð_mask-
> >dst) &&
> +
> rte_is_broadcast_ether_addr(ð_mask->src)) {
> + filter->input.flow.l2_flow.src =
> + eth_spec->src;
> + input_set |= I40E_INSET_SMAC;
> + } else if
> (rte_is_broadcast_ether_addr(ð_mask->dst) &&
> +
> rte_is_broadcast_ether_addr(ð_mask->src)) {
> + filter->input.flow.l2_flow.dst =
> + eth_spec->dst;
> + filter->input.flow.l2_flow.src =
> + eth_spec->src;
> + input_set |= (I40E_INSET_DMAC |
> I40E_INSET_SMAC);
> + } else {
> rte_flow_error_set(error, EINVAL,
>
> RTE_FLOW_ERROR_TYPE_ITEM,
> item,
> @@ -2635,7 +2651,8 @@ i40e_flow_parse_fdir_pattern(struct rte_eth_dev
> *dev,
> return -rte_errno;
> }
> }
> - if (eth_spec && eth_mask && eth_mask->type) {
> + if (eth_spec && eth_mask &&
> + next_type == RTE_FLOW_ITEM_TYPE_END) {
> if (eth_mask->type != RTE_BE16(0xffff)) {
> rte_flow_error_set(error, EINVAL,
>
> RTE_FLOW_ERROR_TYPE_ITEM,
> @@ -2750,21 +2767,33 @@ i40e_flow_parse_fdir_pattern(struct
> rte_eth_dev *dev,
> frag_off & RTE_IPV4_HDR_MF_FLAG)
> pctype =
> I40E_FILTER_PCTYPE_FRAG_IPV4;
>
> - /* Get the filter info */
> - filter->input.flow.ip4_flow.proto =
> - ipv4_spec->hdr.next_proto_id;
> - filter->input.flow.ip4_flow.tos =
> - ipv4_spec->hdr.type_of_service;
> - filter->input.flow.ip4_flow.ttl =
> - ipv4_spec->hdr.time_to_live;
> - filter->input.flow.ip4_flow.src_ip =
> - ipv4_spec->hdr.src_addr;
> - filter->input.flow.ip4_flow.dst_ip =
> - ipv4_spec->hdr.dst_addr;
> -
> - filter->input.flow_ext.inner_ip = false;
> - filter->input.flow_ext.oip_type =
> - I40E_FDIR_IPTYPE_IPV4;
> + if (input_set & (I40E_INSET_DMAC |
> I40E_INSET_SMAC)) {
> + if (input_set & (I40E_INSET_IPV4_SRC
> |
> + I40E_INSET_IPV4_DST |
> I40E_INSET_IPV4_TOS |
> + I40E_INSET_IPV4_TTL |
> I40E_INSET_IPV4_PROTO)) {
> + rte_flow_error_set(error,
> EINVAL,
> +
> RTE_FLOW_ERROR_TYPE_ITEM,
> + item,
> + "L2 and L3 input set
> are exclusive.");
> + return -rte_errno;
> + }
> + } else {
> + /* Get the filter info */
> + filter->input.flow.ip4_flow.proto =
> + ipv4_spec-
> >hdr.next_proto_id;
> + filter->input.flow.ip4_flow.tos =
> + ipv4_spec-
> >hdr.type_of_service;
> + filter->input.flow.ip4_flow.ttl =
> + ipv4_spec->hdr.time_to_live;
> + filter->input.flow.ip4_flow.src_ip =
> + ipv4_spec->hdr.src_addr;
> + filter->input.flow.ip4_flow.dst_ip =
> + ipv4_spec->hdr.dst_addr;
> +
> + filter->input.flow_ext.inner_ip = false;
> + filter->input.flow_ext.oip_type =
> + I40E_FDIR_IPTYPE_IPV4;
> + }
> } else if (!ipv4_spec && !ipv4_mask && !outer_ip) {
> filter->input.flow_ext.inner_ip = true;
> filter->input.flow_ext.iip_type =
> @@ -2894,17 +2923,28 @@ i40e_flow_parse_fdir_pattern(struct
> rte_eth_dev *dev,
> if (tcp_mask->hdr.dst_port == UINT16_MAX)
> input_set |= I40E_INSET_DST_PORT;
>
> - /* Get filter info */
> - if (l3 == RTE_FLOW_ITEM_TYPE_IPV4) {
> - filter->input.flow.tcp4_flow.src_port
> =
> - tcp_spec->hdr.src_port;
> - filter->input.flow.tcp4_flow.dst_port
> =
> - tcp_spec->hdr.dst_port;
> - } else if (l3 == RTE_FLOW_ITEM_TYPE_IPV6) {
> - filter->input.flow.tcp6_flow.src_port
> =
> - tcp_spec->hdr.src_port;
> - filter->input.flow.tcp6_flow.dst_port
> =
> - tcp_spec->hdr.dst_port;
> + if (input_set & (I40E_INSET_DMAC |
> I40E_INSET_SMAC)) {
> + if (input_set &
> + (I40E_INSET_SRC_PORT |
> I40E_INSET_DST_PORT)) {
> + rte_flow_error_set(error,
> EINVAL,
> +
> RTE_FLOW_ERROR_TYPE_ITEM,
> + item,
> + "L2 and L4 input set
> are exclusive.");
> + return -rte_errno;
> + }
> + } else {
> + /* Get filter info */
> + if (l3 == RTE_FLOW_ITEM_TYPE_IPV4)
> {
> + filter-
> >input.flow.tcp4_flow.src_port =
> + tcp_spec-
> >hdr.src_port;
> + filter-
> >input.flow.tcp4_flow.dst_port =
> + tcp_spec-
> >hdr.dst_port;
> + } else if (l3 ==
> RTE_FLOW_ITEM_TYPE_IPV6) {
> + filter-
> >input.flow.tcp6_flow.src_port =
> + tcp_spec-
> >hdr.src_port;
> + filter-
> >input.flow.tcp6_flow.dst_port =
> + tcp_spec-
> >hdr.dst_port;
> + }
> }
> }
>
> @@ -2938,17 +2978,28 @@ i40e_flow_parse_fdir_pattern(struct
> rte_eth_dev *dev,
> if (udp_mask->hdr.dst_port == UINT16_MAX)
> input_set |= I40E_INSET_DST_PORT;
>
> - /* Get filter info */
> - if (l3 == RTE_FLOW_ITEM_TYPE_IPV4) {
> - filter->input.flow.udp4_flow.src_port
> =
> - udp_spec->hdr.src_port;
> - filter->input.flow.udp4_flow.dst_port
> =
> - udp_spec->hdr.dst_port;
> - } else if (l3 == RTE_FLOW_ITEM_TYPE_IPV6) {
> - filter->input.flow.udp6_flow.src_port
> =
> - udp_spec->hdr.src_port;
> - filter->input.flow.udp6_flow.dst_port
> =
> - udp_spec->hdr.dst_port;
> + if (input_set & (I40E_INSET_DMAC |
> I40E_INSET_SMAC)) {
> + if (input_set &
> + (I40E_INSET_SRC_PORT |
> I40E_INSET_DST_PORT)) {
> + rte_flow_error_set(error,
> EINVAL,
> +
> RTE_FLOW_ERROR_TYPE_ITEM,
> + item,
> + "L2 and L4 input set
> are exclusive.");
> + return -rte_errno;
> + }
> + } else {
> + /* Get filter info */
> + if (l3 == RTE_FLOW_ITEM_TYPE_IPV4)
> {
> + filter-
> >input.flow.udp4_flow.src_port =
> + udp_spec-
> >hdr.src_port;
> + filter-
> >input.flow.udp4_flow.dst_port =
> + udp_spec-
> >hdr.dst_port;
> + } else if (l3 ==
> RTE_FLOW_ITEM_TYPE_IPV6) {
> + filter-
> >input.flow.udp6_flow.src_port =
> + udp_spec-
> >hdr.src_port;
> + filter-
> >input.flow.udp6_flow.dst_port =
> + udp_spec-
> >hdr.dst_port;
> + }
> }
> }
> filter->input.flow_ext.is_udp = true;
> --
> 2.17.1
Acked-by: Beilei Xing <beilei.xing@intel.com>
next prev parent reply other threads:[~2020-04-02 8:26 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-16 0:47 [dpdk-dev] [PATCH] net/i40e: enable dst " Lunyuan Cui
2020-03-18 3:15 ` [dpdk-dev] [PATCH v2] net/i40e: enable " Lunyuan Cui
2020-03-27 12:18 ` Xing, Beilei
2020-03-30 9:05 ` [dpdk-dev] [PATCH v3] " Lunyuan Cui
2020-03-31 9:33 ` Xing, Beilei
2020-04-01 7:50 ` [dpdk-dev] [PATCH v4] " Lunyuan Cui
2020-04-02 1:08 ` Xing, Beilei
2020-04-02 2:53 ` [dpdk-dev] [PATCH v5] " Lunyuan Cui
2020-04-02 6:39 ` [dpdk-dev] [PATCH v6] " Lunyuan Cui
2020-04-02 7:58 ` [dpdk-dev] [PATCH v7] " Lunyuan Cui
2020-04-02 8:25 ` Xing, Beilei [this message]
2020-04-08 6:44 ` Ye Xiaolong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=BYAPR11MB35417002A5ECF063BF9A938FF7C60@BYAPR11MB3541.namprd11.prod.outlook.com \
--to=beilei.xing@intel.com \
--cc=dev@dpdk.org \
--cc=jingjing.wu@intel.com \
--cc=lunyuanx.cui@intel.com \
--cc=qiming.yang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).