Re: [dpdk-dev] Port 0 Link Down - L2fwd sample application

[Marc Sune <marcdevel@gmail.com>]

2016-04-07 14:50 GMT+02:00 Vivek Gupta <vivek-g@hcl.com>:

> Hi
>
> I have binded eth0 and eth1 with DPDK and then tried to run the l2fwd
> example as below
>
> ./build/l2fwd -c f -n 4 -- -q 8 -p 0x11  but each time I get error
> *****************************
> Checking link status..............
> Port 0 Link Down
> Port 1 Link Down
> ********************************************
>
> I tried with test-pmd example but same result.Could you please help to up
> the link?
>
> Port status is as below-
> Network devices using DPDK-compatible driver
> ============================================
> 0000:01:00.0 'Ethernet Controller 10-Gigabit X540-AT2' drv=uio_pci_generic
> unused=igb_uio
> 0000:01:00.1 'Ethernet Controller 10-Gigabit X540-AT2' drv=uio_pci_generic
> unused=igb_uio
> 0000:06:00.0 'Ethernet Controller 10-Gigabit X540-AT2' drv=uio_pci_generic
> unused=igb_uio
> 0000:06:00.1 'Ethernet Controller 10-Gigabit X540-AT2' drv=uio_pci_generic
> unused=igb_uio
>
> Network devices using kernel driver
> ===================================
> 0000:81:00.0 'Ethernet Controller 10-Gigabit X540-AT2' if=eth4 drv=ixgbe
> unused=igb_uio,uio_pci_generic
> 0000:81:00.1 'Ethernet Controller 10-Gigabit X540-AT2' if=eth5 drv=ixgbe
> unused=igb_uio,uio_pci_generic
>
> Other network devices
> =====================
> <none>
>
>
> Thanks & Regards
> Vivek Gupta
>

In which commit or version are you?

Marc


>
>
> ::DISCLAIMER::
>
> ----------------------------------------------------------------------------------------------------------------------------------------------------
>
> The contents of this e-mail and any attachment(s) are confidential and
> intended for the named recipient(s) only.
> E-mail transmission is not guaranteed to be secure or error-free as
> information could be intercepted, corrupted,
> lost, destroyed, arrive late or incomplete, or may contain viruses in
> transmission. The e mail and its contents
> (with or without referred errors) shall therefore not attach any liability
> on the originator or HCL or its affiliates.
> Views or opinions, if any, presented in this email are solely those of the
> author and may not necessarily reflect the
> views or opinions of HCL or its affiliates. Any form of reproduction,
> dissemination, copying, disclosure, modification,
> distribution and / or publication of this message without the prior
> written consent of authorized representative of
> HCL is strictly prohibited. If you have received this email in error
> please delete it and notify the sender immediately.
> Before opening any email and/or attachments, please check them for viruses
> and other defects.
>
>
> ----------------------------------------------------------------------------------------------------------------------------------------------------
>
>