From: Ajit Khaparde <ajit.khaparde@broadcom.com>
To: "Morten Brørup" <mb@smartsharesystems.com>
Cc: dev@dpdk.org, Tyler Retzlaff <roretzla@linux.microsoft.com>,
Thomas Monjalon <thomas@monjalon.net>,
Ferruh Yigit <ferruh.yigit@amd.com>,
Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>,
Somnath Kotur <somnath.kotur@broadcom.com>,
Bruce Richardson <bruce.richardson@intel.com>,
Gaetan Rivet <grive@u256.net>, Jie Hai <haijie1@huawei.com>,
Long Li <longli@microsoft.com>, Wei Hu <weh@microsoft.com>
Subject: Re: [PATCH 2/2] drivers/net: support single queue per port
Date: Fri, 25 Oct 2024 14:27:51 -0700 [thread overview]
Message-ID: <CACZ4nhspEN5bD+qE4-+vGEiHVF3Nqa=4Wju=-7yzmA5c-okXCQ@mail.gmail.com> (raw)
In-Reply-To: <20241025115223.1230680-3-mb@smartsharesystems.com>
[-- Attachment #1: Type: text/plain, Size: 7489 bytes --]
On Fri, Oct 25, 2024 at 4:52 AM Morten Brørup <mb@smartsharesystems.com> wrote:
>
> When configuring DPDK for one queue per port
> (#define RTE_MAX_QUEUES_PER_PORT 1), compilation of some network drivers
> fails with e.g.:
>
> ../drivers/net/bnxt/bnxt_rxq.c: In function 'bnxt_rx_queue_stop':
> ../drivers/net/bnxt/bnxt_rxq.c:587:34: error: array subscript 1 is above array bounds of 'uint8_t[1]' {aka 'unsigned char[1]'} [-Werror=array-bounds=]
> 587 | dev->data->rx_queue_state[q_id] = RTE_ETH_QUEUE_STATE_STOPPED;
> | ~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~
> In file included from ../drivers/net/bnxt/bnxt.h:16,
> from ../drivers/net/bnxt/bnxt_rxq.c:10:
> ../lib/ethdev/ethdev_driver.h:168:17: note: while referencing 'rx_queue_state'
> 168 | uint8_t rx_queue_state[RTE_MAX_QUEUES_PER_PORT];
> | ^~~~~~~~~~~~~~
>
> To fix this, a hint is added to the network drivers where a compiler in
> the CI has been seen to emit the above error when DPDK is configured for
> one queue per port, but we know that the error cannot occur.
>
> Signed-off-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
> ---
> drivers/net/bnxt/bnxt_ethdev.c | 2 ++
> drivers/net/bnxt/bnxt_rxq.c | 1 +
> drivers/net/e1000/igb_rxtx.c | 2 ++
> drivers/net/failsafe/failsafe_ops.c | 10 ++++++++--
> drivers/net/hns3/hns3_rxtx.c | 2 ++
> drivers/net/mana/tx.c | 1 +
> 6 files changed, 16 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c
> index 1f7c0d77d5..136e308437 100644
> --- a/drivers/net/bnxt/bnxt_ethdev.c
> +++ b/drivers/net/bnxt/bnxt_ethdev.c
> @@ -910,6 +910,7 @@ static int bnxt_start_nic(struct bnxt *bp)
> struct bnxt_rx_queue *rxq = bp->rx_queues[j];
>
> if (!rxq->rx_deferred_start) {
> + __rte_assume(j < RTE_MAX_QUEUES_PER_PORT);
> bp->eth_dev->data->rx_queue_state[j] =
> RTE_ETH_QUEUE_STATE_STARTED;
> rxq->rx_started = true;
> @@ -930,6 +931,7 @@ static int bnxt_start_nic(struct bnxt *bp)
> struct bnxt_tx_queue *txq = bp->tx_queues[j];
>
> if (!txq->tx_deferred_start) {
> + __rte_assume(j < RTE_MAX_QUEUES_PER_PORT);
> bp->eth_dev->data->tx_queue_state[j] =
> RTE_ETH_QUEUE_STATE_STARTED;
> txq->tx_started = true;
> diff --git a/drivers/net/bnxt/bnxt_rxq.c b/drivers/net/bnxt/bnxt_rxq.c
> index 1c25c57ca6..1651c26545 100644
> --- a/drivers/net/bnxt/bnxt_rxq.c
> +++ b/drivers/net/bnxt/bnxt_rxq.c
> @@ -584,6 +584,7 @@ int bnxt_rx_queue_stop(struct rte_eth_dev *dev, uint16_t rx_queue_id)
> return -EINVAL;
> }
>
> + __rte_assume(q_id < RTE_MAX_QUEUES_PER_PORT);
> dev->data->rx_queue_state[q_id] = RTE_ETH_QUEUE_STATE_STOPPED;
> rxq->rx_started = false;
> PMD_DRV_LOG_LINE(DEBUG, "Rx queue stopped");
> diff --git a/drivers/net/e1000/igb_rxtx.c b/drivers/net/e1000/igb_rxtx.c
> index d61eaad2de..4276bb6d31 100644
> --- a/drivers/net/e1000/igb_rxtx.c
> +++ b/drivers/net/e1000/igb_rxtx.c
> @@ -1868,6 +1868,7 @@ igb_dev_clear_queues(struct rte_eth_dev *dev)
> struct igb_rx_queue *rxq;
>
> for (i = 0; i < dev->data->nb_tx_queues; i++) {
> + __rte_assume(i < RTE_MAX_QUEUES_PER_PORT);
> txq = dev->data->tx_queues[i];
> if (txq != NULL) {
> igb_tx_queue_release_mbufs(txq);
> @@ -1877,6 +1878,7 @@ igb_dev_clear_queues(struct rte_eth_dev *dev)
> }
>
> for (i = 0; i < dev->data->nb_rx_queues; i++) {
> + __rte_assume(i < RTE_MAX_QUEUES_PER_PORT);
> rxq = dev->data->rx_queues[i];
> if (rxq != NULL) {
> igb_rx_queue_release_mbufs(rxq);
> diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
> index 9c013e0419..5321c3385c 100644
> --- a/drivers/net/failsafe/failsafe_ops.c
> +++ b/drivers/net/failsafe/failsafe_ops.c
> @@ -111,12 +111,14 @@ fs_set_queues_state_start(struct rte_eth_dev *dev)
> uint16_t i;
>
> for (i = 0; i < dev->data->nb_rx_queues; i++) {
> + __rte_assume(i < RTE_MAX_QUEUES_PER_PORT);
> rxq = dev->data->rx_queues[i];
> if (rxq != NULL && !rxq->info.conf.rx_deferred_start)
> dev->data->rx_queue_state[i] =
> RTE_ETH_QUEUE_STATE_STARTED;
> }
> for (i = 0; i < dev->data->nb_tx_queues; i++) {
> + __rte_assume(i < RTE_MAX_QUEUES_PER_PORT);
> txq = dev->data->tx_queues[i];
> if (txq != NULL && !txq->info.conf.tx_deferred_start)
> dev->data->tx_queue_state[i] =
> @@ -176,14 +178,18 @@ fs_set_queues_state_stop(struct rte_eth_dev *dev)
> {
> uint16_t i;
>
> - for (i = 0; i < dev->data->nb_rx_queues; i++)
> + for (i = 0; i < dev->data->nb_rx_queues; i++) {
> + __rte_assume(i < RTE_MAX_QUEUES_PER_PORT);
> if (dev->data->rx_queues[i] != NULL)
> dev->data->rx_queue_state[i] =
> RTE_ETH_QUEUE_STATE_STOPPED;
> - for (i = 0; i < dev->data->nb_tx_queues; i++)
> + }
> + for (i = 0; i < dev->data->nb_tx_queues; i++) {
> + __rte_assume(i < RTE_MAX_QUEUES_PER_PORT);
> if (dev->data->tx_queues[i] != NULL)
> dev->data->tx_queue_state[i] =
> RTE_ETH_QUEUE_STATE_STOPPED;
> + }
> }
>
> static int
> diff --git a/drivers/net/hns3/hns3_rxtx.c b/drivers/net/hns3/hns3_rxtx.c
> index 5941b966e0..03bbbc435f 100644
> --- a/drivers/net/hns3/hns3_rxtx.c
> +++ b/drivers/net/hns3/hns3_rxtx.c
> @@ -1309,6 +1309,7 @@ hns3_start_tqps(struct hns3_hw *hw)
> hns3_enable_all_queues(hw, true);
>
> for (i = 0; i < hw->data->nb_tx_queues; i++) {
> + __rte_assume(i < RTE_MAX_QUEUES_PER_PORT);
> txq = hw->data->tx_queues[i];
> if (txq->enabled)
> hw->data->tx_queue_state[i] =
> @@ -1316,6 +1317,7 @@ hns3_start_tqps(struct hns3_hw *hw)
> }
>
> for (i = 0; i < hw->data->nb_rx_queues; i++) {
> + __rte_assume(i < RTE_MAX_QUEUES_PER_PORT);
> rxq = hw->data->rx_queues[i];
> if (rxq->enabled)
> hw->data->rx_queue_state[i] =
> diff --git a/drivers/net/mana/tx.c b/drivers/net/mana/tx.c
> index 272a28bcba..40931ac027 100644
> --- a/drivers/net/mana/tx.c
> +++ b/drivers/net/mana/tx.c
> @@ -154,6 +154,7 @@ mana_start_tx_queues(struct rte_eth_dev *dev)
> txq->gdma_cq.count, txq->gdma_cq.size,
> txq->gdma_cq.head);
>
> + __rte_assume(i < RTE_MAX_QUEUES_PER_PORT);
> dev->data->tx_queue_state[i] = RTE_ETH_QUEUE_STATE_STARTED;
> }
>
> --
> 2.43.0
>
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4218 bytes --]
next prev parent reply other threads:[~2024-10-25 21:28 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-25 11:52 [PATCH 0/2] ethdev: " Morten Brørup
2024-10-25 11:52 ` [PATCH 1/2] eal: add unreachable and precondition hints Morten Brørup
2024-10-25 11:52 ` [PATCH 2/2] drivers/net: support single queue per port Morten Brørup
2024-10-25 21:27 ` Ajit Khaparde [this message]
2024-10-25 21:56 ` Long Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CACZ4nhspEN5bD+qE4-+vGEiHVF3Nqa=4Wju=-7yzmA5c-okXCQ@mail.gmail.com' \
--to=ajit.khaparde@broadcom.com \
--cc=andrew.rybchenko@oktetlabs.ru \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@amd.com \
--cc=grive@u256.net \
--cc=haijie1@huawei.com \
--cc=longli@microsoft.com \
--cc=mb@smartsharesystems.com \
--cc=roretzla@linux.microsoft.com \
--cc=somnath.kotur@broadcom.com \
--cc=thomas@monjalon.net \
--cc=weh@microsoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).