On Wed, Mar 2, 2022 at 9:28 AM Thierry Herbelot
<thierry.herbelot@6wind.com> wrote:
>
> On 3/2/22 18:26, Ajit Khaparde wrote:
> > On Wed, Mar 2, 2022 at 9:16 AM Thierry Herbelot
> > <thierry.herbelot@6wind.com> wrote:
> >>
> >> Hello Ajit
> >>
> >> The card is not correctly probed by the kernel, and so the FW version is
> >> not visible.
> > Thanks Thierry.
> > I thought it was just the PMD running into trouble.
> >
> > Can you give details of the ARM server?
> > Make, Vendor, etc..?
>
> This a Huawei server:
> TaiShan 200 Server (Model 2180) aarch64, 48 cores, 2.6GHz, 64GB RAM

Ok. I tried this on a HUAWEI Kunpeng 920 running 4.18.0-348.2.1.el8_5.aarch64.
I can load the bnxt_en kernel driver and the DPDK PMD without issues.
And I did load vfio with enable_unsafe_noiommu_mode=1 .

While we are pursuing this further internally,
I have added Honnappa to see if he can provide any insight.

Ajit

>
>         Thierry
>
> >
> >
> >>
> >> I see this in the kernel dmesg:
> >> bnxt_en 0000:03:00.0 (unnamed net_device) (uninitialized): Error
> >> (timeout: 500015) msg {0x0 0x0} len:0
> >> bnxt_en 0000:03:00.0 (unnamed net_device) (uninitialized): Firmware not
> >> responding, status: 0x8ffff
> >>
> >> And then there are no bnxt_en netdevices.
> >>
> >>          Best regards
> >>
> >>          Thierry
> >>
> >>
> >> On 3/2/22 18:13, Ajit Khaparde wrote:
> >>> On Wed, Mar 2, 2022 at 7:13 AM Thierry Herbelot
> >>> <thierry.herbelot@6wind.com> wrote:
> >>>>
> >>>> Hello Ajit
> >>>>
> >>>> Thanks for the quick response.
> >>>>
> >>>> Please keep me posted when you check on your side.
> >>> Can you tell what is the firmware version on the card?
> >>>
> >>>>
> >>>>           Best regards
> >>>>
> >>>>           Thierry
> >>>>
> >>>> On 3/2/22 16:08, Ajit Khaparde wrote:
> >>>>>>
> >>>>>> Is this a know issue ?
> >>>>> No.
> >>>>> We have tried the Broadcom PMD on ARM server(s) and have been
> >>>>> able to use it without any issues.
> >>>>> But we can try it again and get back to you.
> >>>>>
> >>>>>
> >>>>>>
> >>>>>>            Thanks
> >>>>>>
> >>>>>>            Thierry Herbelot
> >>>>>>
> >>>>>> PS: a similar error is seen for the Ethernet ports, when handled by the
> >>>>>> kernel:
> >>>>>> dmesg|grep bnxt
> >>>>>> [   57.823746] bnxt_en 0000:03:00.0 (unnamed net_device)
> >>>>>> (uninitialized): Error (timeout: 500015) msg {0x0 0x0} len:0
> >>>>>> [   59.202255] bnxt_en: probe of 0000:03:00.0 failed with error -16
> >>>>>> [   60.641519] bnxt_en 0000:03:00.1 (unnamed net_device)
> >>>>>> (uninitialized): Error (timeout: 500015) msg {0x0 0x0} len:0
> >>>>>> [   61.502237] bnxt_en: probe of 0000:03:00.1 failed with error -16
> >>>>>>
> >>>>>>
> >>>>>> --
> >>>>>> Thierry Herbelot
> >>>>>> Senior Software Engineer
> >>>>>> Tel: +33 1 39 30 92 61
> >>>>>> http://www.6wind.com/
> >>>>>>
> >>>>>> Follow us:
> >>>>>> https://www.linkedin.com/company/6wind/
> >>>>>> https://twitter.com/6WINDsoftware
> >>>>>> https://www.youtube.com/user/6windsoftware
> >>>>
> >>>> --
> >>>> Thierry Herbelot
> >>>> Senior Software Engineer
> >>>> Tel: +33 1 39 30 92 61
> >>>> http://www.6wind.com/
> >>>>
> >>>> Follow us:
> >>>> https://www.linkedin.com/company/6wind/
> >>>> https://twitter.com/6WINDsoftware
> >>>> https://www.youtube.com/user/6windsoftware
> >>
> >> --
> >> Thierry Herbelot
> >> Senior Software Engineer
> >> Tel: +33 1 39 30 92 61
> >> http://www.6wind.com/
> >>
> >> Follow us:
> >> https://www.linkedin.com/company/6wind/
> >> https://twitter.com/6WINDsoftware
> >> https://www.youtube.com/user/6windsoftware
>
> --
> Thierry Herbelot
> Senior Software Engineer
> Tel: +33 1 39 30 92 61
> http://www.6wind.com/
>
> Follow us:
> https://www.linkedin.com/company/6wind/
> https://twitter.com/6WINDsoftware
> https://www.youtube.com/user/6windsoftware