* [dpdk-dev] [PATCH 4/5] net/nfl: add newline in PMD_RX/TX_LOG macros
2018-04-25 15:45 [dpdk-dev] [PATCH 0/5] net/nfp logging fixes Stephen Hemminger
` (2 preceding siblings ...)
2018-04-25 15:45 ` [dpdk-dev] [PATCH 3/5] net/nfp: fix double space in init log Stephen Hemminger
@ 2018-04-25 15:45 ` Stephen Hemminger
2018-04-25 15:45 ` [dpdk-dev] [PATCH 5/5] net/nfp: use dynamic logging everywhere Stephen Hemminger
2018-04-26 12:52 ` [dpdk-dev] [PATCH 0/5] net/nfp logging fixes Alejandro Lucero
5 siblings, 0 replies; 10+ messages in thread
From: Stephen Hemminger @ 2018-04-25 15:45 UTC (permalink / raw)
To: alejandro.lucero; +Cc: dev, Stephen Hemminger
Be consistent with usage in other drivers.
No need for snowflake drivers.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
drivers/net/nfp/nfp_net.c | 30 +++++++++++++++---------------
drivers/net/nfp/nfp_net_logs.h | 4 ++--
2 files changed, 17 insertions(+), 17 deletions(-)
diff --git a/drivers/net/nfp/nfp_net.c b/drivers/net/nfp/nfp_net.c
index f32104ae7327..c8b0fff9df14 100644
--- a/drivers/net/nfp/nfp_net.c
+++ b/drivers/net/nfp/nfp_net.c
@@ -1660,7 +1660,7 @@ nfp_net_rx_queue_setup(struct rte_eth_dev *dev,
return -ENOMEM;
}
- PMD_RX_LOG(DEBUG, "rxbufs=%p hw_ring=%p dma_addr=0x%" PRIx64 "\n",
+ PMD_RX_LOG(DEBUG, "rxbufs=%p hw_ring=%p dma_addr=0x%" PRIx64,
rxq->rxbufs, rxq->rxds, (unsigned long int)rxq->dma);
nfp_net_reset_rx_queue(rxq);
@@ -1685,7 +1685,7 @@ nfp_net_rx_fill_freelist(struct nfp_net_rxq *rxq)
uint64_t dma_addr;
unsigned i;
- PMD_RX_LOG(DEBUG, "nfp_net_rx_fill_freelist for %u descriptors\n",
+ PMD_RX_LOG(DEBUG, "nfp_net_rx_fill_freelist for %u descriptors",
rxq->rx_count);
for (i = 0; i < rxq->rx_count; i++) {
@@ -1705,14 +1705,14 @@ nfp_net_rx_fill_freelist(struct nfp_net_rxq *rxq)
rxd->fld.dma_addr_hi = (dma_addr >> 32) & 0xff;
rxd->fld.dma_addr_lo = dma_addr & 0xffffffff;
rxe[i].mbuf = mbuf;
- PMD_RX_LOG(DEBUG, "[%d]: %" PRIx64 "\n", i, dma_addr);
+ PMD_RX_LOG(DEBUG, "[%d]: %" PRIx64, i, dma_addr);
}
/* Make sure all writes are flushed before telling the hardware */
rte_wmb();
/* Not advertising the whole ring as the firmware gets confused if so */
- PMD_RX_LOG(DEBUG, "Increment FL write pointer in %u\n",
+ PMD_RX_LOG(DEBUG, "Increment FL write pointer in %u",
rxq->rx_count - 1);
nfp_qcp_ptr_add(rxq->qcp_fl, NFP_QCP_WRITE_PTR, rxq->rx_count - 1);
@@ -1771,7 +1771,7 @@ nfp_net_tx_queue_setup(struct rte_eth_dev *dev, uint16_t queue_idx,
* calling nfp_net_stop
*/
if (dev->data->tx_queues[queue_idx]) {
- PMD_TX_LOG(DEBUG, "Freeing memory prior to re-allocation %d\n",
+ PMD_TX_LOG(DEBUG, "Freeing memory prior to re-allocation %d",
queue_idx);
nfp_net_tx_queue_release(dev->data->tx_queues[queue_idx]);
dev->data->tx_queues[queue_idx] = NULL;
@@ -1825,7 +1825,7 @@ nfp_net_tx_queue_setup(struct rte_eth_dev *dev, uint16_t queue_idx,
nfp_net_tx_queue_release(txq);
return -ENOMEM;
}
- PMD_TX_LOG(DEBUG, "txbufs=%p hw_ring=%p dma_addr=0x%" PRIx64 "\n",
+ PMD_TX_LOG(DEBUG, "txbufs=%p hw_ring=%p dma_addr=0x%" PRIx64,
txq->txbufs, txq->txds, (unsigned long int)txq->dma);
nfp_net_reset_tx_queue(txq);
@@ -2120,7 +2120,7 @@ nfp_net_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts, uint16_t nb_pkts)
mb = rxb->mbuf;
rxb->mbuf = new_mb;
- PMD_RX_LOG(DEBUG, "Packet len: %u, mbuf_size: %u\n",
+ PMD_RX_LOG(DEBUG, "Packet len: %u, mbuf_size: %u",
rxds->rxd.data_len, rxq->mbuf_size);
/* Size of this segment */
@@ -2191,7 +2191,7 @@ nfp_net_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts, uint16_t nb_pkts)
if (nb_hold == 0)
return nb_hold;
- PMD_RX_LOG(DEBUG, "RX port_id=%u queue_id=%u, %d packets received\n",
+ PMD_RX_LOG(DEBUG, "RX port_id=%u queue_id=%u, %d packets received",
rxq->port_id, (unsigned int)rxq->qidx, nb_hold);
nb_hold += rxq->nb_rx_hold;
@@ -2202,7 +2202,7 @@ nfp_net_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts, uint16_t nb_pkts)
*/
rte_wmb();
if (nb_hold > rxq->rx_free_thresh) {
- PMD_RX_LOG(DEBUG, "port=%u queue=%u nb_hold=%u avail=%u\n",
+ PMD_RX_LOG(DEBUG, "port=%u queue=%u nb_hold=%u avail=%u",
rxq->port_id, (unsigned int)rxq->qidx,
(unsigned)nb_hold, (unsigned)avail);
nfp_qcp_ptr_add(rxq->qcp_fl, NFP_QCP_WRITE_PTR, nb_hold);
@@ -2226,14 +2226,14 @@ nfp_net_tx_free_bufs(struct nfp_net_txq *txq)
int todo;
PMD_TX_LOG(DEBUG, "queue %u. Check for descriptor with a complete"
- " status\n", txq->qidx);
+ " status", txq->qidx);
/* Work out how many packets have been sent */
qcp_rd_p = nfp_qcp_read(txq->qcp_q, NFP_QCP_READ_PTR);
if (qcp_rd_p == txq->rd_p) {
PMD_TX_LOG(DEBUG, "queue %u: It seems harrier is not sending "
- "packets (%u, %u)\n", txq->qidx,
+ "packets (%u, %u)", txq->qidx,
qcp_rd_p, txq->rd_p);
return 0;
}
@@ -2243,7 +2243,7 @@ nfp_net_tx_free_bufs(struct nfp_net_txq *txq)
else
todo = qcp_rd_p + txq->tx_count - txq->rd_p;
- PMD_TX_LOG(DEBUG, "qcp_rd_p %u, txq->rd_p: %u, qcp->rd_p: %u\n",
+ PMD_TX_LOG(DEBUG, "qcp_rd_p %u, txq->rd_p: %u, qcp->rd_p: %u",
qcp_rd_p, txq->rd_p, txq->rd_p);
if (todo == 0)
@@ -2297,7 +2297,7 @@ nfp_net_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
hw = txq->hw;
txds = &txq->txds[txq->wr_p];
- PMD_TX_LOG(DEBUG, "working for queue %u at pos %d and %u packets\n",
+ PMD_TX_LOG(DEBUG, "working for queue %u at pos %d and %u packets",
txq->qidx, txq->wr_p, nb_pkts);
if ((nfp_free_tx_desc(txq) < nb_pkts) || (nfp_net_txq_full(txq)))
@@ -2311,7 +2311,7 @@ nfp_net_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
i = 0;
issued_descs = 0;
- PMD_TX_LOG(DEBUG, "queue: %u. Sending %u packets\n",
+ PMD_TX_LOG(DEBUG, "queue: %u. Sending %u packets",
txq->qidx, nb_pkts);
/* Sending packets */
while ((i < nb_pkts) && free_descs) {
@@ -2370,7 +2370,7 @@ nfp_net_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
dma_size = pkt->data_len;
dma_addr = rte_mbuf_data_iova(pkt);
PMD_TX_LOG(DEBUG, "Working with mbuf at dma address:"
- "%" PRIx64 "\n", dma_addr);
+ "%" PRIx64 "", dma_addr);
/* Filling descriptors fields */
txds->dma_len = dma_size;
diff --git a/drivers/net/nfp/nfp_net_logs.h b/drivers/net/nfp/nfp_net_logs.h
index 1641de2ba863..9952881cd52c 100644
--- a/drivers/net/nfp/nfp_net_logs.h
+++ b/drivers/net/nfp/nfp_net_logs.h
@@ -42,14 +42,14 @@ extern int nfp_logtype_init;
#ifdef RTE_LIBRTE_NFP_NET_DEBUG_RX
#define PMD_RX_LOG(level, fmt, args...) \
- RTE_LOG(level, PMD, "%s() rx: " fmt, __func__, ## args)
+ RTE_LOG(level, PMD, "%s() rx: " fmt "\n", __func__, ## args)
#else
#define PMD_RX_LOG(level, fmt, args...) do { } while (0)
#endif
#ifdef RTE_LIBRTE_NFP_NET_DEBUG_TX
#define PMD_TX_LOG(level, fmt, args...) \
- RTE_LOG(level, PMD, "%s() tx: " fmt, __func__, ## args)
+ RTE_LOG(level, PMD, "%s() tx: " fmt "\n", __func__, ## args)
#define ASSERT(x) if (!(x)) rte_panic("NFP_NET: x")
#else
#define PMD_TX_LOG(level, fmt, args...) do { } while (0)
--
2.17.0
^ permalink raw reply [flat|nested] 10+ messages in thread
* [dpdk-dev] [PATCH 5/5] net/nfp: use dynamic logging everywhere
2018-04-25 15:45 [dpdk-dev] [PATCH 0/5] net/nfp logging fixes Stephen Hemminger
` (3 preceding siblings ...)
2018-04-25 15:45 ` [dpdk-dev] [PATCH 4/5] net/nfl: add newline in PMD_RX/TX_LOG macros Stephen Hemminger
@ 2018-04-25 15:45 ` Stephen Hemminger
2018-04-26 12:52 ` [dpdk-dev] [PATCH 0/5] net/nfp logging fixes Alejandro Lucero
5 siblings, 0 replies; 10+ messages in thread
From: Stephen Hemminger @ 2018-04-25 15:45 UTC (permalink / raw)
To: alejandro.lucero; +Cc: dev, Stephen Hemminger
Drivers should only log with their assigned logtype, not with the
generic PMD log type.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
drivers/net/nfp/nfp_net.c | 132 +++++++++++++++++++-------------------
1 file changed, 66 insertions(+), 66 deletions(-)
diff --git a/drivers/net/nfp/nfp_net.c b/drivers/net/nfp/nfp_net.c
index c8b0fff9df14..e092ab20296f 100644
--- a/drivers/net/nfp/nfp_net.c
+++ b/drivers/net/nfp/nfp_net.c
@@ -1423,15 +1423,15 @@ nfp_net_dev_link_status_print(struct rte_eth_dev *dev)
rte_eth_linkstatus_get(dev, &link);
if (link.link_status)
- RTE_LOG(INFO, PMD, "Port %d: Link Up - speed %u Mbps - %s\n",
- dev->data->port_id, link.link_speed,
- link.link_duplex == ETH_LINK_FULL_DUPLEX
- ? "full-duplex" : "half-duplex");
+ PMD_DRV_LOG(INFO, "Port %d: Link Up - speed %u Mbps - %s",
+ dev->data->port_id, link.link_speed,
+ link.link_duplex == ETH_LINK_FULL_DUPLEX
+ ? "full-duplex" : "half-duplex");
else
- RTE_LOG(INFO, PMD, " Port %d: Link Down\n",
- dev->data->port_id);
+ PMD_DRV_LOG(INFO, " Port %d: Link Down",
+ dev->data->port_id);
- RTE_LOG(INFO, PMD, "PCI Address: %04d:%02d:%02d:%d\n",
+ PMD_DRV_LOG(INFO, "PCI Address: %04d:%02d:%02d:%d",
pci_dev->addr.domain, pci_dev->addr.bus,
pci_dev->addr.devid, pci_dev->addr.function);
}
@@ -1491,7 +1491,7 @@ nfp_net_dev_interrupt_handler(void *param)
if (rte_eal_alarm_set(timeout * 1000,
nfp_net_dev_interrupt_delayed_handler,
(void *)dev) < 0) {
- RTE_LOG(ERR, PMD, "Error setting alarm");
+ PMD_INIT_LOG(ERR, "Error setting alarm");
/* Unmasking */
nfp_net_irq_unmask(dev);
}
@@ -1578,7 +1578,7 @@ nfp_net_rx_queue_setup(struct rte_eth_dev *dev,
if (((nb_desc * sizeof(struct nfp_net_rx_desc)) % 128) != 0 ||
(nb_desc > NFP_NET_MAX_RX_DESC) ||
(nb_desc < NFP_NET_MIN_RX_DESC)) {
- RTE_LOG(ERR, PMD, "Wrong nb_desc value\n");
+ PMD_DRV_LOG(ERR, "Wrong nb_desc value");
return -EINVAL;
}
@@ -1586,10 +1586,10 @@ nfp_net_rx_queue_setup(struct rte_eth_dev *dev,
rxmode = &dev_conf->rxmode;
if (rx_conf->offloads != rxmode->offloads) {
- RTE_LOG(ERR, PMD, "queue %u rx offloads not as port offloads\n",
+ PMD_DRV_LOG(ERR, "queue %u rx offloads not as port offloads",
queue_idx);
- RTE_LOG(ERR, PMD, "\tport: %" PRIx64 "\n", rxmode->offloads);
- RTE_LOG(ERR, PMD, "\tqueue: %" PRIx64 "\n", rx_conf->offloads);
+ PMD_DRV_LOG(ERR, "\tport: %" PRIx64 "", rxmode->offloads);
+ PMD_DRV_LOG(ERR, "\tqueue: %" PRIx64 "", rx_conf->offloads);
return -EINVAL;
}
@@ -1642,7 +1642,7 @@ nfp_net_rx_queue_setup(struct rte_eth_dev *dev,
socket_id);
if (tz == NULL) {
- RTE_LOG(ERR, PMD, "Error allocatig rx dma\n");
+ PMD_DRV_LOG(ERR, "Error allocatig rx dma");
nfp_net_rx_queue_release(rxq);
return -ENOMEM;
}
@@ -1693,7 +1693,7 @@ nfp_net_rx_fill_freelist(struct nfp_net_rxq *rxq)
struct rte_mbuf *mbuf = rte_pktmbuf_alloc(rxq->mem_pool);
if (mbuf == NULL) {
- RTE_LOG(ERR, PMD, "RX mbuf alloc failed queue_id=%u\n",
+ PMD_DRV_LOG(ERR, "RX mbuf alloc failed queue_id=%u",
(unsigned)rxq->qidx);
return -ENOMEM;
}
@@ -1740,7 +1740,7 @@ nfp_net_tx_queue_setup(struct rte_eth_dev *dev, uint16_t queue_idx,
if (((nb_desc * sizeof(struct nfp_net_tx_desc)) % 128) != 0 ||
(nb_desc > NFP_NET_MAX_TX_DESC) ||
(nb_desc < NFP_NET_MIN_TX_DESC)) {
- RTE_LOG(ERR, PMD, "Wrong nb_desc value\n");
+ PMD_DRV_LOG(ERR, "Wrong nb_desc value");
return -EINVAL;
}
@@ -1748,7 +1748,7 @@ nfp_net_tx_queue_setup(struct rte_eth_dev *dev, uint16_t queue_idx,
txmode = &dev_conf->txmode;
if (tx_conf->offloads != txmode->offloads) {
- RTE_LOG(ERR, PMD, "queue %u tx offloads not as port offloads",
+ PMD_DRV_LOG(ERR, "queue %u tx offloads not as port offloads",
queue_idx);
return -EINVAL;
}
@@ -1758,10 +1758,10 @@ nfp_net_tx_queue_setup(struct rte_eth_dev *dev, uint16_t queue_idx,
DEFAULT_TX_FREE_THRESH);
if (tx_free_thresh > (nb_desc)) {
- RTE_LOG(ERR, PMD,
+ PMD_DRV_LOG(ERR,
"tx_free_thresh must be less than the number of TX "
"descriptors. (tx_free_thresh=%u port=%d "
- "queue=%d)\n", (unsigned int)tx_free_thresh,
+ "queue=%d)", (unsigned int)tx_free_thresh,
dev->data->port_id, (int)queue_idx);
return -(EINVAL);
}
@@ -1781,7 +1781,7 @@ nfp_net_tx_queue_setup(struct rte_eth_dev *dev, uint16_t queue_idx,
txq = rte_zmalloc_socket("ethdev TX queue", sizeof(struct nfp_net_txq),
RTE_CACHE_LINE_SIZE, socket_id);
if (txq == NULL) {
- RTE_LOG(ERR, PMD, "Error allocating tx dma\n");
+ PMD_DRV_LOG(ERR, "Error allocating tx dma");
return -ENOMEM;
}
@@ -1795,7 +1795,7 @@ nfp_net_tx_queue_setup(struct rte_eth_dev *dev, uint16_t queue_idx,
NFP_NET_MAX_TX_DESC, NFP_MEMZONE_ALIGN,
socket_id);
if (tz == NULL) {
- RTE_LOG(ERR, PMD, "Error allocating tx dma\n");
+ PMD_DRV_LOG(ERR, "Error allocating tx dma");
nfp_net_tx_queue_release(txq);
return -ENOMEM;
}
@@ -2420,7 +2420,7 @@ nfp_net_vlan_offload_set(struct rte_eth_dev *dev, int mask)
if ((mask & ETH_VLAN_FILTER_OFFLOAD) ||
(mask & ETH_VLAN_EXTEND_OFFLOAD))
- RTE_LOG(INFO, PMD, "No support for ETH_VLAN_FILTER_OFFLOAD or"
+ PMD_DRV_LOG(INFO, "No support for ETH_VLAN_FILTER_OFFLOAD or"
" ETH_VLAN_EXTEND_OFFLOAD");
/* Enable vlan strip if it is not configured yet */
@@ -2457,9 +2457,9 @@ nfp_net_rss_reta_write(struct rte_eth_dev *dev,
NFP_NET_DEV_PRIVATE_TO_HW(dev->data->dev_private);
if (reta_size != NFP_NET_CFG_RSS_ITBL_SZ) {
- RTE_LOG(ERR, PMD, "The size of hash lookup table configured "
+ PMD_DRV_LOG(ERR, "The size of hash lookup table configured "
"(%d) doesn't match the number hardware can supported "
- "(%d)\n", reta_size, NFP_NET_CFG_RSS_ITBL_SZ);
+ "(%d)", reta_size, NFP_NET_CFG_RSS_ITBL_SZ);
return -EINVAL;
}
@@ -2538,9 +2538,9 @@ nfp_net_reta_query(struct rte_eth_dev *dev,
return -EINVAL;
if (reta_size != NFP_NET_CFG_RSS_ITBL_SZ) {
- RTE_LOG(ERR, PMD, "The size of hash lookup table configured "
+ PMD_DRV_LOG(ERR, "The size of hash lookup table configured "
"(%d) doesn't match the number hardware can supported "
- "(%d)\n", reta_size, NFP_NET_CFG_RSS_ITBL_SZ);
+ "(%d)", reta_size, NFP_NET_CFG_RSS_ITBL_SZ);
return -EINVAL;
}
@@ -2626,14 +2626,14 @@ nfp_net_rss_hash_update(struct rte_eth_dev *dev,
/* Checking if RSS is enabled */
if (!(hw->ctrl & NFP_NET_CFG_CTRL_RSS)) {
if (rss_hf != 0) { /* Enable RSS? */
- RTE_LOG(ERR, PMD, "RSS unsupported\n");
+ PMD_DRV_LOG(ERR, "RSS unsupported");
return -EINVAL;
}
return 0; /* Nothing to do */
}
if (rss_conf->rss_key_len > NFP_NET_CFG_RSS_KEY_SZ) {
- RTE_LOG(ERR, PMD, "hash key too long\n");
+ PMD_DRV_LOG(ERR, "hash key too long");
return -EINVAL;
}
@@ -2705,7 +2705,7 @@ nfp_net_rss_config_default(struct rte_eth_dev *dev)
uint16_t queue;
int i, j, ret;
- RTE_LOG(INFO, PMD, "setting default RSS conf for %u queues\n",
+ PMD_DRV_LOG(INFO, "setting default RSS conf for %u queues",
rx_queues);
nfp_reta_conf[0].mask = ~0x0;
@@ -2725,7 +2725,7 @@ nfp_net_rss_config_default(struct rte_eth_dev *dev)
dev_conf = &dev->data->dev_conf;
if (!dev_conf) {
- RTE_LOG(INFO, PMD, "wrong rss conf");
+ PMD_DRV_LOG(INFO, "wrong rss conf");
return -EINVAL;
}
rss_conf = dev_conf->rx_adv_conf.rss_conf;
@@ -2816,11 +2816,11 @@ nfp_net_init(struct rte_eth_dev *eth_dev)
(pci_dev->id.device_id == PCI_DEVICE_ID_NFP6000_PF_NIC)) {
port = get_pf_port_number(eth_dev->data->name);
if (port < 0 || port > 7) {
- RTE_LOG(ERR, PMD, "Port value is wrong\n");
+ PMD_DRV_LOG(ERR, "Port value is wrong");
return -ENODEV;
}
- PMD_INIT_LOG(DEBUG, "Working with PF port value %d\n", port);
+ PMD_INIT_LOG(DEBUG, "Working with PF port value %d", port);
/* This points to port 0 private data */
hwport0 = NFP_NET_DEV_PRIVATE_TO_HW(eth_dev->data->dev_private);
@@ -2854,8 +2854,8 @@ nfp_net_init(struct rte_eth_dev *eth_dev)
hw->ctrl_bar = (uint8_t *)pci_dev->mem_resource[0].addr;
if (hw->ctrl_bar == NULL) {
- RTE_LOG(ERR, PMD,
- "hw->ctrl_bar is NULL. BAR0 not configured\n");
+ PMD_DRV_LOG(ERR,
+ "hw->ctrl_bar is NULL. BAR0 not configured");
return -ENODEV;
}
@@ -2864,11 +2864,11 @@ nfp_net_init(struct rte_eth_dev *eth_dev)
hw->total_ports * 32768,
&hw->ctrl_area);
if (!hw->ctrl_bar) {
- printf("nfp_rtsym_map fails for _pf0_net_ctrl_bar\n");
+ printf("nfp_rtsym_map fails for _pf0_net_ctrl_bar");
return -EIO;
}
- PMD_INIT_LOG(DEBUG, "ctrl bar: %p\n", hw->ctrl_bar);
+ PMD_INIT_LOG(DEBUG, "ctrl bar: %p", hw->ctrl_bar);
}
if (port > 0) {
@@ -2880,7 +2880,7 @@ nfp_net_init(struct rte_eth_dev *eth_dev)
(port * NFP_PF_CSR_SLICE_SIZE);
}
- PMD_INIT_LOG(DEBUG, "ctrl bar: %p\n", hw->ctrl_bar);
+ PMD_INIT_LOG(DEBUG, "ctrl bar: %p", hw->ctrl_bar);
hw->max_rx_queues = nn_cfg_readl(hw, NFP_NET_CFG_MAX_RXRINGS);
hw->max_tx_queues = nn_cfg_readl(hw, NFP_NET_CFG_MAX_TXRINGS);
@@ -2896,13 +2896,13 @@ nfp_net_init(struct rte_eth_dev *eth_dev)
rx_bar_off = start_q * NFP_QCP_QUEUE_ADDR_SZ;
break;
default:
- RTE_LOG(ERR, PMD, "nfp_net: no device ID matching\n");
+ PMD_DRV_LOG(ERR, "nfp_net: no device ID matching");
err = -ENODEV;
goto dev_err_ctrl_map;
}
- PMD_INIT_LOG(DEBUG, "tx_bar_off: 0x%" PRIx64 "\n", tx_bar_off);
- PMD_INIT_LOG(DEBUG, "rx_bar_off: 0x%" PRIx64 "\n", rx_bar_off);
+ PMD_INIT_LOG(DEBUG, "tx_bar_off: 0x%" PRIx64 "", tx_bar_off);
+ PMD_INIT_LOG(DEBUG, "rx_bar_off: 0x%" PRIx64 "", rx_bar_off);
if (hw->is_pf && port == 0) {
/* configure access to tx/rx vNIC BARs */
@@ -2912,12 +2912,12 @@ nfp_net_init(struct rte_eth_dev *eth_dev)
&hw->hwqueues_area);
if (!hwport0->hw_queues) {
- printf("nfp_rtsym_map fails for net.qc\n");
+ printf("nfp_rtsym_map fails for net.qc");
err = -EIO;
goto dev_err_ctrl_map;
}
- PMD_INIT_LOG(DEBUG, "tx/rx bar address: 0x%p\n",
+ PMD_INIT_LOG(DEBUG, "tx/rx bar address: 0x%p",
hwport0->hw_queues);
}
@@ -2998,7 +2998,7 @@ nfp_net_init(struct rte_eth_dev *eth_dev)
}
if (!is_valid_assigned_ether_addr((struct ether_addr *)&hw->mac_addr)) {
- PMD_INIT_LOG(INFO, "Using random mac address for port %d\n",
+ PMD_INIT_LOG(INFO, "Using random mac address for port %d",
port);
/* Using random mac addresses for VFs */
eth_random_addr(&hw->mac_addr[0]);
@@ -3124,7 +3124,7 @@ nfp_fw_upload(struct rte_pci_device *dev, struct nfp_nsp *nsp, char *card)
sprintf(fw_name, "%s/%s.nffw", DEFAULT_FW_PATH, serial);
- RTE_LOG(DEBUG, PMD, "Trying with fw file: %s\n", fw_name);
+ PMD_DRV_LOG(DEBUG, "Trying with fw file: %s", fw_name);
fw_f = open(fw_name, O_RDONLY);
if (fw_f > 0)
goto read_fw;
@@ -3132,34 +3132,34 @@ nfp_fw_upload(struct rte_pci_device *dev, struct nfp_nsp *nsp, char *card)
/* Then try the PCI name */
sprintf(fw_name, "%s/pci-%s.nffw", DEFAULT_FW_PATH, dev->device.name);
- RTE_LOG(DEBUG, PMD, "Trying with fw file: %s\n", fw_name);
+ PMD_DRV_LOG(DEBUG, "Trying with fw file: %s", fw_name);
fw_f = open(fw_name, O_RDONLY);
if (fw_f > 0)
goto read_fw;
/* Finally try the card type and media */
sprintf(fw_name, "%s/%s", DEFAULT_FW_PATH, card);
- RTE_LOG(DEBUG, PMD, "Trying with fw file: %s\n", fw_name);
+ PMD_DRV_LOG(DEBUG, "Trying with fw file: %s", fw_name);
fw_f = open(fw_name, O_RDONLY);
if (fw_f < 0) {
- RTE_LOG(INFO, PMD, "Firmware file %s not found.", fw_name);
+ PMD_DRV_LOG(INFO, "Firmware file %s not found.", fw_name);
return -ENOENT;
}
read_fw:
if (fstat(fw_f, &file_stat) < 0) {
- RTE_LOG(INFO, PMD, "Firmware file %s size is unknown", fw_name);
+ PMD_DRV_LOG(INFO, "Firmware file %s size is unknown", fw_name);
close(fw_f);
return -ENOENT;
}
fsize = file_stat.st_size;
- RTE_LOG(INFO, PMD, "Firmware file found at %s with size: %" PRIu64 "\n",
+ PMD_DRV_LOG(INFO, "Firmware file found at %s with size: %" PRIu64 "",
fw_name, (uint64_t)fsize);
fw_buf = malloc((size_t)fsize);
if (!fw_buf) {
- RTE_LOG(INFO, PMD, "malloc failed for fw buffer");
+ PMD_DRV_LOG(INFO, "malloc failed for fw buffer");
close(fw_f);
return -ENOMEM;
}
@@ -3167,7 +3167,7 @@ nfp_fw_upload(struct rte_pci_device *dev, struct nfp_nsp *nsp, char *card)
bytes = read(fw_f, fw_buf, fsize);
if (bytes != fsize) {
- RTE_LOG(INFO, PMD, "Reading fw to buffer failed.\n"
+ PMD_DRV_LOG(INFO, "Reading fw to buffer failed."
"Just %" PRIu64 " of %" PRIu64 " bytes read",
(uint64_t)bytes, (uint64_t)fsize);
free(fw_buf);
@@ -3175,9 +3175,9 @@ nfp_fw_upload(struct rte_pci_device *dev, struct nfp_nsp *nsp, char *card)
return -EIO;
}
- RTE_LOG(INFO, PMD, "Uploading the firmware ...");
+ PMD_DRV_LOG(INFO, "Uploading the firmware ...");
nfp_nsp_load_fw(nsp, fw_buf, bytes);
- RTE_LOG(INFO, PMD, "Done");
+ PMD_DRV_LOG(INFO, "Done");
free(fw_buf);
close(fw_f);
@@ -3197,29 +3197,29 @@ nfp_fw_setup(struct rte_pci_device *dev, struct nfp_cpp *cpp,
nfp_fw_model = nfp_hwinfo_lookup(hwinfo, "assembly.partno");
if (nfp_fw_model) {
- RTE_LOG(INFO, PMD, "firmware model found: %s\n", nfp_fw_model);
+ PMD_DRV_LOG(INFO, "firmware model found: %s", nfp_fw_model);
} else {
- RTE_LOG(ERR, PMD, "firmware model NOT found\n");
+ PMD_DRV_LOG(ERR, "firmware model NOT found");
return -EIO;
}
if (nfp_eth_table->count == 0 || nfp_eth_table->count > 8) {
- RTE_LOG(ERR, PMD, "NFP ethernet table reports wrong ports: %u\n",
+ PMD_DRV_LOG(ERR, "NFP ethernet table reports wrong ports: %u",
nfp_eth_table->count);
return -EIO;
}
- RTE_LOG(INFO, PMD, "NFP ethernet port table reports %u ports\n",
+ PMD_DRV_LOG(INFO, "NFP ethernet port table reports %u ports",
nfp_eth_table->count);
- RTE_LOG(INFO, PMD, "Port speed: %u\n", nfp_eth_table->ports[0].speed);
+ PMD_DRV_LOG(INFO, "Port speed: %u", nfp_eth_table->ports[0].speed);
sprintf(card_desc, "nic_%s_%dx%d.nffw", nfp_fw_model,
nfp_eth_table->count, nfp_eth_table->ports[0].speed / 1000);
nsp = nfp_nsp_open(cpp);
if (!nsp) {
- RTE_LOG(ERR, PMD, "NFP error when obtaining NSP handle\n");
+ PMD_DRV_LOG(ERR, "NFP error when obtaining NSP handle");
return -EIO;
}
@@ -3248,25 +3248,25 @@ static int nfp_pf_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
cpp = nfp_cpp_from_device_name(dev->device.name);
if (!cpp) {
- RTE_LOG(ERR, PMD, "A CPP handle can not be obtained");
+ PMD_DRV_LOG(ERR, "A CPP handle can not be obtained");
ret = -EIO;
goto error;
}
hwinfo = nfp_hwinfo_read(cpp);
if (!hwinfo) {
- RTE_LOG(ERR, PMD, "Error reading hwinfo table");
+ PMD_DRV_LOG(ERR, "Error reading hwinfo table");
return -EIO;
}
nfp_eth_table = nfp_eth_read_ports(cpp);
if (!nfp_eth_table) {
- RTE_LOG(ERR, PMD, "Error reading NFP ethernet table\n");
+ PMD_DRV_LOG(ERR, "Error reading NFP ethernet table");
return -EIO;
}
if (nfp_fw_setup(dev, cpp, nfp_eth_table, hwinfo)) {
- RTE_LOG(INFO, PMD, "Error when uploading firmware\n");
+ PMD_DRV_LOG(INFO, "Error when uploading firmware");
ret = -EIO;
goto error;
}
@@ -3274,7 +3274,7 @@ static int nfp_pf_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
/* Now the symbol table should be there */
sym_tbl = nfp_rtsym_table_read(cpp);
if (!sym_tbl) {
- RTE_LOG(ERR, PMD, "Something is wrong with the firmware"
+ PMD_DRV_LOG(ERR, "Something is wrong with the firmware"
" symbol table");
ret = -EIO;
goto error;
@@ -3282,14 +3282,14 @@ static int nfp_pf_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
total_ports = nfp_rtsym_read_le(sym_tbl, "nfd_cfg_pf0_num_ports", &err);
if (total_ports != (int)nfp_eth_table->count) {
- RTE_LOG(ERR, PMD, "Inconsistent number of ports\n");
+ PMD_DRV_LOG(ERR, "Inconsistent number of ports");
ret = -EIO;
goto error;
}
- PMD_INIT_LOG(INFO, "Total pf ports: %d\n", total_ports);
+ PMD_INIT_LOG(INFO, "Total pf ports: %d", total_ports);
if (total_ports <= 0 || total_ports > 8) {
- RTE_LOG(ERR, PMD, "nfd_cfg_pf0_num_ports symbol with wrong value");
+ PMD_DRV_LOG(ERR, "nfd_cfg_pf0_num_ports symbol with wrong value");
ret = -ENODEV;
goto error;
}
--
2.17.0
^ permalink raw reply [flat|nested] 10+ messages in thread