DPDK patches and discussions
 help / color / Atom feed
* [dpdk-dev] Speed Capabilities Test Plan for DTS Development
@ 2020-06-23 20:33 Daniel Kirichok
  0 siblings, 0 replies; only message in thread
From: Daniel Kirichok @ 2020-06-23 20:33 UTC (permalink / raw)
  To: dev, dts; +Cc: Lincoln Lavoie

Hi,

The Speed Capabilities test will first check the speed of each interface
that the device lists through ethtool. Then it compares each interface
speed to a user-defined set of expected speeds set in a newly created
config file, `speed_capabilities.cfg`. The test fails if an interface is
found that isn’t accounted for in the cfg file, the detected speed is less
than 1 Gb/s, or an interface detects a different speed than what is
expected from the cfg file. Otherwise, it passes.

Let me know if there are any comments or questions.

Thanks,
Dan
-- 

Dan Kirichok

UNH InterOperability Laboratory

21 Madbury Rd, Suite 100, Durham, NH 03824

dkirichok@iol.unh.edu

www.iol.unh.edu

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-23 20:33 [dpdk-dev] Speed Capabilities Test Plan for DTS Development Daniel Kirichok

DPDK patches and discussions

Archives are clonable:
	git clone --mirror http://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ http://inbox.dpdk.org/dev \
		dev@dpdk.org
	public-inbox-index dev


Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/ public-inbox