Hi Stephen, Downloaded https://fast.dpdk.org/rel/dpdk-22.11.1.tar.xz, built and linked with the application. Still don't get rxq interrupt of ixgbe ports. EAL: Detected CPU lcores: 4 EAL: Detected NUMA nodes: 1 EAL: Detected static linkage of DPDK EAL: Multi-process socket /var/run/dpdk/rte/mp_socket EAL: Selected IOVA mode 'PA' EAL: VFIO support initialized EAL: Using IOMMU type 8 (No-IOMMU) EAL: Probe PCI driver: net_ixgbe (8086:15e4) device: 0000:02:00.0 (socket -1) EAL: Probe PCI driver: net_ixgbe (8086:15e4) device: 0000:02:00.1 (socket -1) EAL: Ignore mapping IO port bar(2) EAL: Probe PCI driver: net_e1000_igb (8086:1521) device: 0000:04:00.1 (socket -11) # cat /proc/interrupts | grep vfio 59: 0 0 6 0 IR-PCI-MSI 1048576-edge vfio-msix[0](0000:02:00.0) 60: 0 6 0 0 IR-PCI-MSI 1050624-edge vfio-msix[0](0000:02:00.1) 61: 0 0 1 0 IR-PCI-MSI 2099200-edge vfio-msix[0](0000:04:00.1) #>>>>> the above 3 irq's are link state change interrupt, verified by plugging-out and plugging-in eth cable and verified the above irq counter increments every time. 62: 0 0 0 0 IR-PCI-MSI 1050625-edge vfio-msix[1](0000:02:00.1) 63: 0 18200 0 0 IR-PCI-MSI 2099201-edge vfio-msix[1](0000:04:00.1) 64: 0 0 0 0 IR-PCI-MSI 1048577-edge vfio-msix[1](0000:02:00.0) #>>>>> igb port irq counter is non-zero (likely to be rxq), where-as the same for ixgbe is 0. Thanks & Regards, Rajasekhar On Wed, Mar 8, 2023 at 3:12 AM Stephen Hemminger wrote: > On Wed, 8 Mar 2023 00:22:10 +0530 > Rajasekhar Pulluru wrote: > > > Hi Team, > > > > Bringing-up dpdk-22.07 on an intel machine with 8 ports, 4 of them driven > > by igb and the rest of the 4 ports driven by ixgbe. > > > FYI - 22.07 is not a supported release, only LTS releases like 22.11 are > supported. >