From: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com>
To: "Wei Hu (Xavier)" <huwei013@chinasoftinc.com>
Cc: dev@dpdk.org, Stephen Hemminger <stephen@networkplumber.org>,
"Yigit, Ferruh" <ferruh.yigit@intel.com>,
Wei Hu <xavier.huwei@huawei.com>
Subject: Re: [dpdk-dev] [PATCH v4] ethdev: check if queue setup in queue-related APIs
Date: Tue, 13 Oct 2020 09:58:55 +0530 [thread overview]
Message-ID: <CAH-L+nM_x-j8VbL8tCSx5o7BHYHMSKBw1ht+yLu8RL-_HgPyTw@mail.gmail.com> (raw)
In-Reply-To: <20201013024126.26492-1-huwei013@chinasoftinc.com>
Hi Xavier,
Thanks for taking care of the comments. LGTM.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Regards,
Kalesh
On Tue, Oct 13, 2020 at 8:11 AM Wei Hu (Xavier) <huwei013@chinasoftinc.com>
wrote:
> From: Chengchang Tang <tangchengchang@huawei.com>
>
> This patch adds checking whether the related Tx or Rx queue has been setup
> in the queue-related API functions to avoid illegal address access. And
> validity check of the queue_id is also added in the API functions
> rte_eth_dev_rx_intr_enable and rte_eth_dev_rx_intr_disable.
>
> Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
> Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
> Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
> Acked-by: Stephen Hemminger <stephen@networkplumber.org>
> ---
> v3 -> v4:
> 1. dropping the 'rte_' prefix from the funcitons names.
> 2. get "struct rte_eth_dev *dev" as parameter and drop the port_id
> validation in the function named eth_dev_validate_rx_queue and
> eth_dev_validate_tx_queue.
> 3. replace "setupped" with "setup" in the commit log and titile.
> v2 -> v3:
> don't break lines in format strings.
> v1 -> v2:
> 1. replace %"PRIu16" with %u.
> 2. extact two common functions which validate RXQ/TXQ ids and
> whether it has been set up or not.
> ---
> lib/librte_ethdev/rte_ethdev.c | 86
> ++++++++++++++++++++++++++++++++++--------
> lib/librte_ethdev/rte_ethdev.h | 3 +-
> 2 files changed, 72 insertions(+), 17 deletions(-)
>
> diff --git a/lib/librte_ethdev/rte_ethdev.c
> b/lib/librte_ethdev/rte_ethdev.c
> index 892c246..04d30f9 100644
> --- a/lib/librte_ethdev/rte_ethdev.c
> +++ b/lib/librte_ethdev/rte_ethdev.c
> @@ -877,10 +877,53 @@ rte_eth_dev_rx_queue_config(struct rte_eth_dev *dev,
> uint16_t nb_queues)
> return 0;
> }
>
> +static inline int
> +eth_dev_validate_rx_queue(struct rte_eth_dev *dev, uint16_t rx_queue_id)
> +{
> + uint16_t port_id;
> +
> + if (rx_queue_id >= dev->data->nb_rx_queues) {
> + RTE_ETHDEV_LOG(ERR, "Invalid RX queue_id=%u\n",
> rx_queue_id);
> + return -EINVAL;
> + }
> +
> + if (dev->data->rx_queues[rx_queue_id] == NULL) {
> + port_id = dev->data->port_id;
> + RTE_ETHDEV_LOG(ERR,
> + "Queue %u of device with port_id=%u has not
> been setup\n",
> + rx_queue_id, port_id);
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static inline int
> +eth_dev_validate_tx_queue(struct rte_eth_dev *dev, uint16_t tx_queue_id)
> +{
> + uint16_t port_id;
> +
> + if (tx_queue_id >= dev->data->nb_tx_queues) {
> + RTE_ETHDEV_LOG(ERR, "Invalid TX queue_id=%u\n",
> tx_queue_id);
> + return -EINVAL;
> + }
> +
> + if (dev->data->tx_queues[tx_queue_id] == NULL) {
> + port_id = dev->data->port_id;
> + RTE_ETHDEV_LOG(ERR,
> + "Queue %u of device with port_id=%u has not
> been setup\n",
> + tx_queue_id, port_id);
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> int
> rte_eth_dev_rx_queue_start(uint16_t port_id, uint16_t rx_queue_id)
> {
> struct rte_eth_dev *dev;
> + int ret;
>
> RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
>
> @@ -892,10 +935,9 @@ rte_eth_dev_rx_queue_start(uint16_t port_id, uint16_t
> rx_queue_id)
> return -EINVAL;
> }
>
> - if (rx_queue_id >= dev->data->nb_rx_queues) {
> - RTE_ETHDEV_LOG(ERR, "Invalid RX queue_id=%u\n",
> rx_queue_id);
> - return -EINVAL;
> - }
> + ret = eth_dev_validate_rx_queue(dev, rx_queue_id);
> + if (ret)
> + return ret;
>
> RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_queue_start, -ENOTSUP);
>
> @@ -922,14 +964,15 @@ int
> rte_eth_dev_rx_queue_stop(uint16_t port_id, uint16_t rx_queue_id)
> {
> struct rte_eth_dev *dev;
> + int ret;
>
> RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
>
> dev = &rte_eth_devices[port_id];
> - if (rx_queue_id >= dev->data->nb_rx_queues) {
> - RTE_ETHDEV_LOG(ERR, "Invalid RX queue_id=%u\n",
> rx_queue_id);
> - return -EINVAL;
> - }
> +
> + ret = eth_dev_validate_rx_queue(dev, rx_queue_id);
> + if (ret)
> + return ret;
>
> RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_queue_stop, -ENOTSUP);
>
> @@ -955,6 +998,7 @@ int
> rte_eth_dev_tx_queue_start(uint16_t port_id, uint16_t tx_queue_id)
> {
> struct rte_eth_dev *dev;
> + int ret;
>
> RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
>
> @@ -966,10 +1010,9 @@ rte_eth_dev_tx_queue_start(uint16_t port_id,
> uint16_t tx_queue_id)
> return -EINVAL;
> }
>
> - if (tx_queue_id >= dev->data->nb_tx_queues) {
> - RTE_ETHDEV_LOG(ERR, "Invalid TX queue_id=%u\n",
> tx_queue_id);
> - return -EINVAL;
> - }
> + ret = eth_dev_validate_tx_queue(dev, tx_queue_id);
> + if (ret)
> + return ret;
>
> RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->tx_queue_start, -ENOTSUP);
>
> @@ -994,14 +1037,15 @@ int
> rte_eth_dev_tx_queue_stop(uint16_t port_id, uint16_t tx_queue_id)
> {
> struct rte_eth_dev *dev;
> + int ret;
>
> RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
>
> dev = &rte_eth_devices[port_id];
> - if (tx_queue_id >= dev->data->nb_tx_queues) {
> - RTE_ETHDEV_LOG(ERR, "Invalid TX queue_id=%u\n",
> tx_queue_id);
> - return -EINVAL;
> - }
> +
> + ret = eth_dev_validate_tx_queue(dev, tx_queue_id);
> + if (ret)
> + return ret;
>
> RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->tx_queue_stop, -ENOTSUP);
>
> @@ -4458,11 +4502,16 @@ rte_eth_dev_rx_intr_enable(uint16_t port_id,
> uint16_t queue_id)
> {
> struct rte_eth_dev *dev;
> + int ret;
>
> RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
>
> dev = &rte_eth_devices[port_id];
>
> + ret = eth_dev_validate_rx_queue(dev, queue_id);
> + if (ret)
> + return ret;
> +
> RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_queue_intr_enable,
> -ENOTSUP);
> return eth_err(port_id, (*dev->dev_ops->rx_queue_intr_enable)(dev,
> queue_id));
> @@ -4473,11 +4522,16 @@ rte_eth_dev_rx_intr_disable(uint16_t port_id,
> uint16_t queue_id)
> {
> struct rte_eth_dev *dev;
> + int ret;
>
> RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
>
> dev = &rte_eth_devices[port_id];
>
> + ret = eth_dev_validate_rx_queue(dev, queue_id);
> + if (ret)
> + return ret;
> +
> RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_queue_intr_disable,
> -ENOTSUP);
> return eth_err(port_id, (*dev->dev_ops->rx_queue_intr_disable)(dev,
> queue_id));
> diff --git a/lib/librte_ethdev/rte_ethdev.h
> b/lib/librte_ethdev/rte_ethdev.h
> index 5bcfbb8..f4cc591 100644
> --- a/lib/librte_ethdev/rte_ethdev.h
> +++ b/lib/librte_ethdev/rte_ethdev.h
> @@ -4721,7 +4721,8 @@ rte_eth_rx_queue_count(uint16_t port_id, uint16_t
> queue_id)
> RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
> dev = &rte_eth_devices[port_id];
> RTE_FUNC_PTR_OR_ERR_RET(*dev->rx_queue_count, -ENOTSUP);
> - if (queue_id >= dev->data->nb_rx_queues)
> + if (queue_id >= dev->data->nb_rx_queues ||
> + dev->data->rx_queues[queue_id] == NULL)
> return -EINVAL;
>
> return (int)(*dev->rx_queue_count)(dev, queue_id);
> --
> 2.9.5
>
>
--
Regards,
Kalesh A P
next prev parent reply other threads:[~2020-10-13 4:29 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-10 7:12 [dpdk-dev] [PATCH] ethdev: check if queue setupped " Wei Hu (Xavier)
2020-10-10 15:24 ` Stephen Hemminger
2020-10-12 3:21 ` Wei Hu (Xavier)
2020-10-10 16:38 ` Kalesh Anakkur Purayil
2020-10-12 3:22 ` Wei Hu (Xavier)
2020-10-12 3:19 ` [dpdk-dev] [PATCH v2] " Wei Hu (Xavier)
2020-10-12 6:29 ` Stephen Hemminger
2020-10-12 7:32 ` [dpdk-dev] [PATCH v3] " Wei Hu (Xavier)
2020-10-12 15:12 ` Ferruh Yigit
2020-10-12 15:15 ` Stephen Hemminger
2020-10-13 2:41 ` [dpdk-dev] [PATCH v4] ethdev: check if queue setup " Wei Hu (Xavier)
2020-10-13 4:28 ` Kalesh Anakkur Purayil [this message]
2020-10-13 8:08 ` Andrew Rybchenko
2020-10-13 11:50 ` [dpdk-dev] [PATCH v5 0/3] check queue id " Wei Hu (Xavier)
2020-10-13 11:50 ` [dpdk-dev] [PATCH v5 1/3] ethdev: extract checking queue id into common functions Wei Hu (Xavier)
2020-10-13 12:49 ` Andrew Rybchenko
2020-10-13 11:50 ` [dpdk-dev] [PATCH v5 2/3] ethdev: check if queue setup in queue-related APIs Wei Hu (Xavier)
2020-10-13 11:50 ` [dpdk-dev] [PATCH v5 3/3] ethdev: check queue id in Rx interrupt control routine Wei Hu (Xavier)
2020-10-13 13:17 ` [dpdk-dev] [PATCH v5 0/3] check queue id in queue-related APIs Ferruh Yigit
2020-10-13 14:13 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAH-L+nM_x-j8VbL8tCSx5o7BHYHMSKBw1ht+yLu8RL-_HgPyTw@mail.gmail.com \
--to=kalesh-anakkur.purayil@broadcom.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=huwei013@chinasoftinc.com \
--cc=stephen@networkplumber.org \
--cc=xavier.huwei@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).