DPDK patches and discussions
 help / color / Atom feed
* [dpdk-dev] [PATCH] doc: fix typing error in example/l3_forward_access_ctrl
@ 2020-11-02 11:19 Ibtisam Tariq
  2020-11-05  8:54 ` David Marchand
  0 siblings, 1 reply; 4+ messages in thread
From: Ibtisam Tariq @ 2020-11-02 11:19 UTC (permalink / raw)
  To: konstantin.ananyev; +Cc: dev, Ibtisam Tariq, bernard.iremonger

Add "--" and remove extra spaces in l3fwd-acl commands.

Fixes: d0dff9ba4 ("doc: sample application user guide")
Cc: bernard.iremonger@intel.com

Signed-off-by: Ibtisam Tariq <ibtisam.tariq@emumba.com>
---
 doc/guides/sample_app_ug/l3_forward_access_ctrl.rst | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/doc/guides/sample_app_ug/l3_forward_access_ctrl.rst b/doc/guides/sample_app_ug/l3_forward_access_ctrl.rst
index 4a96800ec..3cdfbfb17 100644
--- a/doc/guides/sample_app_ug/l3_forward_access_ctrl.rst
+++ b/doc/guides/sample_app_ug/l3_forward_access_ctrl.rst
@@ -236,7 +236,7 @@ The application has a number of command line options:
 
 ..  code-block:: console
 
-    ./<build_dir>/examples/dpdk-l3fwd-acl [EAL options] -- -p PORTMASK [-P] --config(port,queue,lcore)[,(port,queue,lcore)] --rule_ipv4 FILENAME rule_ipv6 FILENAME [--alg=<val>] [--enable-jumbo [--max-pkt-len PKTLEN]] [--no-numa] [--eth-dest=X,MM:MM:MM:MM:MM:MM]
+    ./<build_dir>/examples/dpdk-l3fwd-acl [EAL options] -- -p PORTMASK [-P] --config(port,queue,lcore)[,(port,queue,lcore)] --rule_ipv4 FILENAME --rule_ipv6 FILENAME [--alg=<val>] [--enable-jumbo [--max-pkt-len PKTLEN]] [--no-numa] [--eth-dest=X,MM:MM:MM:MM:MM:MM]
 
 
 where,
@@ -271,7 +271,7 @@ To enable L3 forwarding between two ports, assuming that both ports are in the s
 
 ..  code-block:: console
 
-    ./<build_dir>/examples/dpdk-l3fwd-acl -l 1,2 -n 4 -- -p 0x3 --config="(0,0,1),(1,0,2)" --rule_ipv4="./rule_ipv4.db" -- rule_ipv6="./rule_ipv6.db" --alg=scalar
+    ./<build_dir>/examples/dpdk-l3fwd-acl -l 1,2 -n 4 -- -p 0x3 --config="(0,0,1),(1,0,2)" --rule_ipv4="./rule_ipv4.db" --rule_ipv6="./rule_ipv6.db" --alg=scalar
 
 In this command:
 
@@ -293,9 +293,9 @@ In this command:
     |          |            |           |                                     |
     +----------+------------+-----------+-------------------------------------+
 
-*   The --rule_ipv4 option specifies the reading of IPv4 rules sets from the ./ rule_ipv4.db file.
+*   The --rule_ipv4 option specifies the reading of IPv4 rules sets from the ./rule_ipv4.db file.
 
-*   The --rule_ipv6 option specifies the reading of IPv6 rules sets from the ./ rule_ipv6.db file.
+*   The --rule_ipv6 option specifies the reading of IPv6 rules sets from the ./rule_ipv6.db file.
 
 *   The --alg=scalar option specifies the performing of rule lookup with a scalar function.
 
-- 
2.17.1


^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [dpdk-dev] [PATCH] doc: fix typing error in example/l3_forward_access_ctrl
  2020-11-02 11:19 [dpdk-dev] [PATCH] doc: fix typing error in example/l3_forward_access_ctrl Ibtisam Tariq
@ 2020-11-05  8:54 ` David Marchand
  2020-11-20 12:04   ` David Marchand
  0 siblings, 1 reply; 4+ messages in thread
From: David Marchand @ 2020-11-05  8:54 UTC (permalink / raw)
  To: Ibtisam Tariq; +Cc: Ananyev, Konstantin, dev, Iremonger, Bernard

On Mon, Nov 2, 2020 at 12:20 PM Ibtisam Tariq <ibtisam.tariq@emumba.com> wrote:
>
> Add "--" and remove extra spaces in l3fwd-acl commands.
>
> Fixes: d0dff9ba4 ("doc: sample application user guide")
> Cc: bernard.iremonger@intel.com
>
> Signed-off-by: Ibtisam Tariq <ibtisam.tariq@emumba.com>
> ---
>  doc/guides/sample_app_ug/l3_forward_access_ctrl.rst | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/doc/guides/sample_app_ug/l3_forward_access_ctrl.rst b/doc/guides/sample_app_ug/l3_forward_access_ctrl.rst
> index 4a96800ec..3cdfbfb17 100644
> --- a/doc/guides/sample_app_ug/l3_forward_access_ctrl.rst
> +++ b/doc/guides/sample_app_ug/l3_forward_access_ctrl.rst
> @@ -236,7 +236,7 @@ The application has a number of command line options:
>
>  ..  code-block:: console
>
> -    ./<build_dir>/examples/dpdk-l3fwd-acl [EAL options] -- -p PORTMASK [-P] --config(port,queue,lcore)[,(port,queue,lcore)] --rule_ipv4 FILENAME rule_ipv6 FILENAME [--alg=<val>] [--enable-jumbo [--max-pkt-len PKTLEN]] [--no-numa] [--eth-dest=X,MM:MM:MM:MM:MM:MM]
> +    ./<build_dir>/examples/dpdk-l3fwd-acl [EAL options] -- -p PORTMASK [-P] --config(port,queue,lcore)[,(port,queue,lcore)] --rule_ipv4 FILENAME --rule_ipv6 FILENAME [--alg=<val>] [--enable-jumbo [--max-pkt-len PKTLEN]] [--no-numa] [--eth-dest=X,MM:MM:MM:MM:MM:MM]
>
>
>  where,
> @@ -271,7 +271,7 @@ To enable L3 forwarding between two ports, assuming that both ports are in the s
>
>  ..  code-block:: console
>
> -    ./<build_dir>/examples/dpdk-l3fwd-acl -l 1,2 -n 4 -- -p 0x3 --config="(0,0,1),(1,0,2)" --rule_ipv4="./rule_ipv4.db" -- rule_ipv6="./rule_ipv6.db" --alg=scalar
> +    ./<build_dir>/examples/dpdk-l3fwd-acl -l 1,2 -n 4 -- -p 0x3 --config="(0,0,1),(1,0,2)" --rule_ipv4="./rule_ipv4.db" --rule_ipv6="./rule_ipv6.db" --alg=scalar
>
>  In this command:
>
> @@ -293,9 +293,9 @@ In this command:
>      |          |            |           |                                     |
>      +----------+------------+-----------+-------------------------------------+
>
> -*   The --rule_ipv4 option specifies the reading of IPv4 rules sets from the ./ rule_ipv4.db file.
> +*   The --rule_ipv4 option specifies the reading of IPv4 rules sets from the ./rule_ipv4.db file.

No point in keeping the ./ and I would remove it in the cmdline
example above too.


> -*   The --rule_ipv6 option specifies the reading of IPv6 rules sets from the ./ rule_ipv6.db file.
> +*   The --rule_ipv6 option specifies the reading of IPv6 rules sets from the ./rule_ipv6.db file.
>
>  *   The --alg=scalar option specifies the performing of rule lookup with a scalar function.
>
> --
> 2.17.1
>

Reviewed-by: David Marchand <david.marchand@redhat.com>

Thanks.

-- 
David Marchand


^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [dpdk-dev] [PATCH] doc: fix typing error in example/l3_forward_access_ctrl
  2020-11-05  8:54 ` David Marchand
@ 2020-11-20 12:04   ` David Marchand
  2020-11-24 12:40     ` Ibtisam Tariq
  0 siblings, 1 reply; 4+ messages in thread
From: David Marchand @ 2020-11-20 12:04 UTC (permalink / raw)
  To: Ibtisam Tariq; +Cc: Ananyev, Konstantin, dev, Iremonger, Bernard

On Thu, Nov 5, 2020 at 9:54 AM David Marchand <david.marchand@redhat.com> wrote:
> On Mon, Nov 2, 2020 at 12:20 PM Ibtisam Tariq <ibtisam.tariq@emumba.com> wrote:
> >
> > Add "--" and remove extra spaces in l3fwd-acl commands.
> >
> > Fixes: d0dff9ba4 ("doc: sample application user guide")
Cc: stable@dpdk.org

> >
> > Signed-off-by: Ibtisam Tariq <ibtisam.tariq@emumba.com>
> Reviewed-by: David Marchand <david.marchand@redhat.com>

Applied, thanks.


-- 
David Marchand


^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [dpdk-dev] [PATCH] doc: fix typing error in example/l3_forward_access_ctrl
  2020-11-20 12:04   ` David Marchand
@ 2020-11-24 12:40     ` Ibtisam Tariq
  0 siblings, 0 replies; 4+ messages in thread
From: Ibtisam Tariq @ 2020-11-24 12:40 UTC (permalink / raw)
  To: David Marchand; +Cc: Ananyev, Konstantin, dev, Iremonger, Bernard

Thank you for applying it.

On Fri, Nov 20, 2020 at 5:04 PM David Marchand <david.marchand@redhat.com>
wrote:

> On Thu, Nov 5, 2020 at 9:54 AM David Marchand <david.marchand@redhat.com>
> wrote:
> > On Mon, Nov 2, 2020 at 12:20 PM Ibtisam Tariq <ibtisam.tariq@emumba.com>
> wrote:
> > >
> > > Add "--" and remove extra spaces in l3fwd-acl commands.
> > >
> > > Fixes: d0dff9ba4 ("doc: sample application user guide")
> Cc: stable@dpdk.org
>
> > >
> > > Signed-off-by: Ibtisam Tariq <ibtisam.tariq@emumba.com>
> > Reviewed-by: David Marchand <david.marchand@redhat.com>
>
> Applied, thanks.
>
>
> --
> David Marchand
>
>

-- 
- Ibtisam

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, back to index

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-11-02 11:19 [dpdk-dev] [PATCH] doc: fix typing error in example/l3_forward_access_ctrl Ibtisam Tariq
2020-11-05  8:54 ` David Marchand
2020-11-20 12:04   ` David Marchand
2020-11-24 12:40     ` Ibtisam Tariq

DPDK patches and discussions

Archives are clonable:
	git clone --mirror http://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ http://inbox.dpdk.org/dev \
		dev@dpdk.org
	public-inbox-index dev


Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/ public-inbox