* Re: [dpdk-dev] [RFC PATCH] mark experimental variables
2019-11-25 16:13 [dpdk-dev] [RFC PATCH] mark experimental variables David Marchand
@ 2019-11-26 9:25 ` Ray Kinsella
2019-11-26 9:50 ` David Marchand
2019-11-26 14:15 ` Neil Horman
2019-11-26 14:22 ` Neil Horman
` (2 subsequent siblings)
3 siblings, 2 replies; 14+ messages in thread
From: Ray Kinsella @ 2019-11-26 9:25 UTC (permalink / raw)
To: David Marchand, nhorman, dev
Cc: thomas, arybchenko, stable, John McNamara, Marko Kovacevic,
Qiming Yang, Wenzhuo Lu, Declan Doherty, Adrien Mazarguil,
Ferruh Yigit, Cristian Dumitrescu
My 2c is that it feels a little unweildy to have to annotate, every variable declaration.
and also extern reference with __rte_experimental_var.
Is there any easier way?
Other minor comments below.
On 25/11/2019 16:13, David Marchand wrote:
> So far, we did not pay attention to direct access to variables but they
> are part of the API/ABI too and should be clearly identified.
>
> Introduce a __rte_experimental_var tag and mark existing variables.
>
> Fixes: a4bcd61de82d ("buildtools: add script to check experimental API exports")
> Cc: stable@dpdk.org
>
> Signed-off-by: David Marchand <david.marchand@redhat.com>
> ---
> Quick patch to try to catch experimental variables.
> Not sure if we could use a single section, so please advise if there is
> better to do about this.
>
> ---
> buildtools/check-experimental-syms.sh | 17 +++++++++++++++--
> devtools/checkpatches.sh | 14 +++++++++-----
> doc/guides/contributing/abi_policy.rst | 7 ++++---
> drivers/net/ice/rte_pmd_ice.h | 3 +++
> lib/librte_cryptodev/rte_crypto_asym.h | 3 +++
> lib/librte_eal/common/include/rte_compat.h | 5 +++++
> lib/librte_ethdev/rte_flow.h | 17 +++++++++++++++++
> lib/librte_port/rte_port_eventdev.h | 5 +++++
> 8 files changed, 61 insertions(+), 10 deletions(-)
>
> diff --git a/buildtools/check-experimental-syms.sh b/buildtools/check-experimental-syms.sh
> index f3603e5ba..27f7b39f6 100755
> --- a/buildtools/check-experimental-syms.sh
> +++ b/buildtools/check-experimental-syms.sh
> @@ -34,13 +34,26 @@ do
> Please add __rte_experimental to the definition of $SYM
> END_OF_MESSAGE
> ret=1
> + elif grep -q "\.data.*[[:space:]]$SYM$" $DUMPFILE &&
> + ! grep -q "\.data\.experimental.*[[:space:]]$SYM$" $DUMPFILE
> + then
> + cat >&2 <<- END_OF_MESSAGE
> + $SYM is not flagged as experimental
> + but is listed in version map
> + Please add __rte_experimental_var to the definition of $SYM
> + END_OF_MESSAGE
> + ret=1
> fi
> done
>
> # Filter out symbols suffixed with a . for icc
> for SYM in `awk '{
> - if ($2 != "l" && $4 == ".text.experimental" && !($NF ~ /\.$/)) {
> - print $NF
> + if ($2 == "l" || $NF ~ /\.$/) {
> + next;
> + }
> + if ($4 == ".text.experimental" ||
> + $4 == ".data.experimental") {
> + print $NF;
> }
> }' $DUMPFILE`
> do
> diff --git a/devtools/checkpatches.sh b/devtools/checkpatches.sh
> index b16bace92..d3d02b8ce 100755
> --- a/devtools/checkpatches.sh
> +++ b/devtools/checkpatches.sh
> @@ -90,11 +90,15 @@ check_experimental_tags() { # <patch>
> "headers ("current_file")";
> ret = 1;
> }
> - if ($1 != "+__rte_experimental" || $2 != "") {
> - print "__rte_experimental must appear alone on the line" \
> - " immediately preceding the return type of a function."
> - ret = 1;
> +
> + if (NF == 1 && ($1 == "+__rte_experimental" ||
> + $1 == "+__rte_experimental_var")) {
> + next;
> }
> + print "__rte_experimental or __rte_experimental_var must " \
> + "appear alone on the line immediately preceding the " \
> + "return type of a function.";
or variable?
> + ret = 1;
> }
> END {
> exit ret;
> @@ -178,7 +182,7 @@ check () { # <patch> <commit> <title>
> ret=1
> fi
>
> - ! $verbose || printf '\nChecking __rte_experimental tags:\n'
> + ! $verbose || printf '\nChecking __rte_experimental* tags:\n'
> report=$(check_experimental_tags "$tmpinput")
> if [ $? -ne 0 ] ; then
> $headline_printed || print_headline "$3"
> diff --git a/doc/guides/contributing/abi_policy.rst b/doc/guides/contributing/abi_policy.rst
> index 05ca95980..189ef6491 100644
> --- a/doc/guides/contributing/abi_policy.rst
> +++ b/doc/guides/contributing/abi_policy.rst
> @@ -300,9 +300,10 @@ Note that marking an API as experimental is a multi step process.
> To mark an API as experimental, the symbols which are desired to be exported
> must be placed in an EXPERIMENTAL version block in the corresponding libraries'
> version map script.
> -Secondly, the corresponding prototypes of those exported functions (in the
> -development header files), must be marked with the ``__rte_experimental`` tag
> -(see ``rte_compat.h``).
> +Secondly, the corresponding prototypes of those exported functions (resp.
> +variables) must be marked with the ``__rte_experimental`` (resp.
> +``__rte_experimental_var``) tag in the development header files (see
> +``rte_compat.h``).
Suggest simplifying as follows (remove the resp.).
Secondly, the corresponding prototypes of those exported functions (or
variables) must be marked with the ``__rte_experimental`` (or
``__rte_experimental_var``) tag in the development header files (see
``rte_compat.h``).
> The DPDK build makefiles perform a check to ensure that the map file and the
> C code reflect the same list of symbols.
> This check can be circumvented by defining ``ALLOW_EXPERIMENTAL_API``
> diff --git a/drivers/net/ice/rte_pmd_ice.h b/drivers/net/ice/rte_pmd_ice.h
> index e254db053..dbd5586d4 100644
> --- a/drivers/net/ice/rte_pmd_ice.h
> +++ b/drivers/net/ice/rte_pmd_ice.h
> @@ -15,6 +15,8 @@
> */
>
> #include <stdio.h>
> +
> +#include <rte_compat.h>
> #include <rte_mbuf.h>
> #include <rte_mbuf_dyn.h>
>
> @@ -81,6 +83,7 @@ union rte_net_ice_proto_xtr_metadata {
> };
>
> /* Offset of mbuf dynamic field for protocol extraction data */
> +__rte_experimental_var
> extern int rte_net_ice_dynfield_proto_xtr_metadata_offs;
>
> /* Mask of mbuf dynamic flags for protocol extraction type */
> diff --git a/lib/librte_cryptodev/rte_crypto_asym.h b/lib/librte_cryptodev/rte_crypto_asym.h
> index 0d34ce8df..d4e84910f 100644
> --- a/lib/librte_cryptodev/rte_crypto_asym.h
> +++ b/lib/librte_cryptodev/rte_crypto_asym.h
> @@ -24,6 +24,7 @@ extern "C" {
> #include <rte_memory.h>
> #include <rte_mempool.h>
> #include <rte_common.h>
> +#include <rte_compat.h>
>
> #include "rte_crypto_sym.h"
>
> @@ -37,10 +38,12 @@ typedef struct rte_crypto_param_t {
> } rte_crypto_param;
>
> /** asym xform type name strings */
> +__rte_experimental_var
> extern const char *
> rte_crypto_asym_xform_strings[];
>
> /** asym operations type name strings */
> +__rte_experimental_var
> extern const char *
> rte_crypto_asym_op_strings[];
>
> diff --git a/lib/librte_eal/common/include/rte_compat.h b/lib/librte_eal/common/include/rte_compat.h
> index 3eb33784b..3fd05179f 100644
> --- a/lib/librte_eal/common/include/rte_compat.h
> +++ b/lib/librte_eal/common/include/rte_compat.h
> @@ -11,11 +11,16 @@
> #define __rte_experimental \
> __attribute__((deprecated("Symbol is not yet part of stable ABI"), \
> section(".text.experimental")))
> +#define __rte_experimental_var \
> +__attribute__((deprecated("Symbol is not yet part of stable ABI"), \
> +section(".data.experimental")))
>
> #else
>
> #define __rte_experimental \
> __attribute__((section(".text.experimental")))
> +#define __rte_experimental_var \
> +__attribute__((section(".data.experimental")))
>
> #endif
>
> diff --git a/lib/librte_ethdev/rte_flow.h b/lib/librte_ethdev/rte_flow.h
> index 452d359a1..c8ea71acc 100644
> --- a/lib/librte_ethdev/rte_flow.h
> +++ b/lib/librte_ethdev/rte_flow.h
> @@ -19,6 +19,7 @@
>
> #include <rte_arp.h>
> #include <rte_common.h>
> +#include <rte_compat.h>
> #include <rte_ether.h>
> #include <rte_icmp.h>
> #include <rte_ip.h>
> @@ -2531,9 +2532,11 @@ struct rte_flow_action_set_meta {
> };
>
> /* Mbuf dynamic field offset for metadata. */
> +__rte_experimental_var
> extern int rte_flow_dynf_metadata_offs;
>
> /* Mbuf dynamic field flag mask for metadata. */
> +__rte_experimental_var
> extern uint64_t rte_flow_dynf_metadata_mask;
>
> /* Mbuf dynamic field pointer for metadata. */
> @@ -2548,14 +2551,24 @@ __rte_experimental
> static inline uint32_t
> rte_flow_dynf_metadata_get(struct rte_mbuf *m)
> {
> +#ifdef ALLOW_EXPERIMENTAL_API
> return *RTE_FLOW_DYNF_METADATA(m);
> +#else
> + RTE_SET_USED(m);
> + return 0;
> +#endif
> }
>
> __rte_experimental
> static inline void
> rte_flow_dynf_metadata_set(struct rte_mbuf *m, uint32_t v)
> {
> +#ifdef ALLOW_EXPERIMENTAL_API
> *RTE_FLOW_DYNF_METADATA(m) = v;
> +#else
> + RTE_SET_USED(m);
> + RTE_SET_USED(v);
> +#endif
> }
>
> /*
> @@ -2800,7 +2813,11 @@ __rte_experimental
> static inline int
> rte_flow_dynf_metadata_avail(void)
> {
> +#ifdef ALLOW_EXPERIMENTAL_API
> return !!rte_flow_dynf_metadata_mask;
> +#else
> + return 0;
> +#endif
> }
>
> /**
> diff --git a/lib/librte_port/rte_port_eventdev.h b/lib/librte_port/rte_port_eventdev.h
> index acf88f4e9..59246e204 100644
> --- a/lib/librte_port/rte_port_eventdev.h
> +++ b/lib/librte_port/rte_port_eventdev.h
> @@ -25,6 +25,8 @@ extern "C" {
> **/
>
> #include <stdint.h>
> +
> +#include <rte_compat.h>
> #include <rte_eventdev.h>
>
> #include "rte_port.h"
> @@ -39,6 +41,7 @@ struct rte_port_eventdev_reader_params {
> };
>
> /** Eventdev_reader port operations. */
> +__rte_experimental_var
> extern struct rte_port_in_ops rte_port_eventdev_reader_ops;
>
> /** Eventdev_writer port parameters. */
> @@ -63,6 +66,7 @@ struct rte_port_eventdev_writer_params {
> };
>
> /** Eventdev_writer port operations. */
> +__rte_experimental_var
> extern struct rte_port_out_ops rte_port_eventdev_writer_ops;
>
> /** Event_writer_nodrop port parameters. */
> @@ -90,6 +94,7 @@ struct rte_port_eventdev_writer_nodrop_params {
> };
>
> /** Eventdev_writer_nodrop port operations. */
> +__rte_experimental_var
> extern struct rte_port_out_ops rte_port_eventdev_writer_nodrop_ops;
>
> #ifdef __cplusplus
>
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [dpdk-dev] [RFC PATCH] mark experimental variables
2019-11-26 9:25 ` Ray Kinsella
@ 2019-11-26 9:50 ` David Marchand
2019-11-26 14:15 ` Neil Horman
1 sibling, 0 replies; 14+ messages in thread
From: David Marchand @ 2019-11-26 9:50 UTC (permalink / raw)
To: Ray Kinsella
Cc: Neil Horman, dev, Thomas Monjalon, Andrew Rybchenko, dpdk stable,
John McNamara, Marko Kovacevic, Qiming Yang, Wenzhuo Lu,
Declan Doherty, Adrien Mazarguil, Ferruh Yigit,
Cristian Dumitrescu
On Tue, Nov 26, 2019 at 10:26 AM Ray Kinsella <mdr@ashroe.eu> wrote:
>
>
> My 2c is that it feels a little unweildy to have to annotate, every variable declaration.
> and also extern reference with __rte_experimental_var.
>
> Is there any easier way?
We use this framework so that the users are aware they are relying on
experimental API that can change overnight.
It would not happen if we could hide all of this behind accessors.
But here we reference them through macros / inlines with performance in mind.
This performance impact needs to be confirmed as a real requirement.
I caught some oddity like the librte_port stuff (with no in-tree
users, but different topic).
> > @@ -90,11 +90,15 @@ check_experimental_tags() { # <patch>
> > "headers ("current_file")";
> > ret = 1;
> > }
> > - if ($1 != "+__rte_experimental" || $2 != "") {
> > - print "__rte_experimental must appear alone on the line" \
> > - " immediately preceding the return type of a function."
> > - ret = 1;
> > +
> > + if (NF == 1 && ($1 == "+__rte_experimental" ||
> > + $1 == "+__rte_experimental_var")) {
> > + next;
> > }
> > + print "__rte_experimental or __rte_experimental_var must " \
> > + "appear alone on the line immediately preceding the " \
> > + "return type of a function.";
>
> or variable?
Yes.
> > @@ -300,9 +300,10 @@ Note that marking an API as experimental is a multi step process.
> > To mark an API as experimental, the symbols which are desired to be exported
> > must be placed in an EXPERIMENTAL version block in the corresponding libraries'
> > version map script.
> > -Secondly, the corresponding prototypes of those exported functions (in the
> > -development header files), must be marked with the ``__rte_experimental`` tag
> > -(see ``rte_compat.h``).
> > +Secondly, the corresponding prototypes of those exported functions (resp.
> > +variables) must be marked with the ``__rte_experimental`` (resp.
> > +``__rte_experimental_var``) tag in the development header files (see
> > +``rte_compat.h``).
>
> Suggest simplifying as follows (remove the resp.).
>
> Secondly, the corresponding prototypes of those exported functions (or
> variables) must be marked with the ``__rte_experimental`` (or
> ``__rte_experimental_var``) tag in the development header files (see
> ``rte_compat.h``).
"or" sounds better.
--
David Marchand
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [dpdk-dev] [RFC PATCH] mark experimental variables
2019-11-26 9:25 ` Ray Kinsella
2019-11-26 9:50 ` David Marchand
@ 2019-11-26 14:15 ` Neil Horman
1 sibling, 0 replies; 14+ messages in thread
From: Neil Horman @ 2019-11-26 14:15 UTC (permalink / raw)
To: Ray Kinsella
Cc: David Marchand, dev, thomas, arybchenko, stable, John McNamara,
Marko Kovacevic, Qiming Yang, Wenzhuo Lu, Declan Doherty,
Adrien Mazarguil, Ferruh Yigit, Cristian Dumitrescu
On Tue, Nov 26, 2019 at 09:25:49AM +0000, Ray Kinsella wrote:
>
> My 2c is that it feels a little unweildy to have to annotate, every variable declaration.
> and also extern reference with __rte_experimental_var.
>
> Is there any easier way?
>
Note, just to be clear, its not every variable, only the ones exposed as global
variable meant to be accessed outside of the library that are not part of a
versioned ABI.
> Other minor comments below.
>
> On 25/11/2019 16:13, David Marchand wrote:
> > So far, we did not pay attention to direct access to variables but they
> > are part of the API/ABI too and should be clearly identified.
> >
> > Introduce a __rte_experimental_var tag and mark existing variables.
> >
> > Fixes: a4bcd61de82d ("buildtools: add script to check experimental API exports")
> > Cc: stable@dpdk.org
> >
> > Signed-off-by: David Marchand <david.marchand@redhat.com>
> > ---
> > Quick patch to try to catch experimental variables.
> > Not sure if we could use a single section, so please advise if there is
> > better to do about this.
> >
> > ---
> > buildtools/check-experimental-syms.sh | 17 +++++++++++++++--
> > devtools/checkpatches.sh | 14 +++++++++-----
> > doc/guides/contributing/abi_policy.rst | 7 ++++---
> > drivers/net/ice/rte_pmd_ice.h | 3 +++
> > lib/librte_cryptodev/rte_crypto_asym.h | 3 +++
> > lib/librte_eal/common/include/rte_compat.h | 5 +++++
> > lib/librte_ethdev/rte_flow.h | 17 +++++++++++++++++
> > lib/librte_port/rte_port_eventdev.h | 5 +++++
> > 8 files changed, 61 insertions(+), 10 deletions(-)
> >
> > diff --git a/buildtools/check-experimental-syms.sh b/buildtools/check-experimental-syms.sh
> > index f3603e5ba..27f7b39f6 100755
> > --- a/buildtools/check-experimental-syms.sh
> > +++ b/buildtools/check-experimental-syms.sh
> > @@ -34,13 +34,26 @@ do
> > Please add __rte_experimental to the definition of $SYM
> > END_OF_MESSAGE
> > ret=1
> > + elif grep -q "\.data.*[[:space:]]$SYM$" $DUMPFILE &&
> > + ! grep -q "\.data\.experimental.*[[:space:]]$SYM$" $DUMPFILE
> > + then
> > + cat >&2 <<- END_OF_MESSAGE
> > + $SYM is not flagged as experimental
> > + but is listed in version map
> > + Please add __rte_experimental_var to the definition of $SYM
> > + END_OF_MESSAGE
> > + ret=1
> > fi
> > done
> >
> > # Filter out symbols suffixed with a . for icc
> > for SYM in `awk '{
> > - if ($2 != "l" && $4 == ".text.experimental" && !($NF ~ /\.$/)) {
> > - print $NF
> > + if ($2 == "l" || $NF ~ /\.$/) {
> > + next;
> > + }
> > + if ($4 == ".text.experimental" ||
> > + $4 == ".data.experimental") {
> > + print $NF;
> > }
> > }' $DUMPFILE`
> > do
> > diff --git a/devtools/checkpatches.sh b/devtools/checkpatches.sh
> > index b16bace92..d3d02b8ce 100755
> > --- a/devtools/checkpatches.sh
> > +++ b/devtools/checkpatches.sh
> > @@ -90,11 +90,15 @@ check_experimental_tags() { # <patch>
> > "headers ("current_file")";
> > ret = 1;
> > }
> > - if ($1 != "+__rte_experimental" || $2 != "") {
> > - print "__rte_experimental must appear alone on the line" \
> > - " immediately preceding the return type of a function."
> > - ret = 1;
> > +
> > + if (NF == 1 && ($1 == "+__rte_experimental" ||
> > + $1 == "+__rte_experimental_var")) {
> > + next;
> > }
> > + print "__rte_experimental or __rte_experimental_var must " \
> > + "appear alone on the line immediately preceding the " \
> > + "return type of a function.";
>
> or variable?
>
> > + ret = 1;
> > }
> > END {
> > exit ret;
> > @@ -178,7 +182,7 @@ check () { # <patch> <commit> <title>
> > ret=1
> > fi
> >
> > - ! $verbose || printf '\nChecking __rte_experimental tags:\n'
> > + ! $verbose || printf '\nChecking __rte_experimental* tags:\n'
> > report=$(check_experimental_tags "$tmpinput")
> > if [ $? -ne 0 ] ; then
> > $headline_printed || print_headline "$3"
> > diff --git a/doc/guides/contributing/abi_policy.rst b/doc/guides/contributing/abi_policy.rst
> > index 05ca95980..189ef6491 100644
> > --- a/doc/guides/contributing/abi_policy.rst
> > +++ b/doc/guides/contributing/abi_policy.rst
> > @@ -300,9 +300,10 @@ Note that marking an API as experimental is a multi step process.
> > To mark an API as experimental, the symbols which are desired to be exported
> > must be placed in an EXPERIMENTAL version block in the corresponding libraries'
> > version map script.
> > -Secondly, the corresponding prototypes of those exported functions (in the
> > -development header files), must be marked with the ``__rte_experimental`` tag
> > -(see ``rte_compat.h``).
> > +Secondly, the corresponding prototypes of those exported functions (resp.
> > +variables) must be marked with the ``__rte_experimental`` (resp.
> > +``__rte_experimental_var``) tag in the development header files (see
> > +``rte_compat.h``).
>
> Suggest simplifying as follows (remove the resp.).
>
> Secondly, the corresponding prototypes of those exported functions (or
> variables) must be marked with the ``__rte_experimental`` (or
> ``__rte_experimental_var``) tag in the development header files (see
> ``rte_compat.h``).
>
> > The DPDK build makefiles perform a check to ensure that the map file and the
> > C code reflect the same list of symbols.
> > This check can be circumvented by defining ``ALLOW_EXPERIMENTAL_API``
> > diff --git a/drivers/net/ice/rte_pmd_ice.h b/drivers/net/ice/rte_pmd_ice.h
> > index e254db053..dbd5586d4 100644
> > --- a/drivers/net/ice/rte_pmd_ice.h
> > +++ b/drivers/net/ice/rte_pmd_ice.h
> > @@ -15,6 +15,8 @@
> > */
> >
> > #include <stdio.h>
> > +
> > +#include <rte_compat.h>
> > #include <rte_mbuf.h>
> > #include <rte_mbuf_dyn.h>
> >
> > @@ -81,6 +83,7 @@ union rte_net_ice_proto_xtr_metadata {
> > };
> >
> > /* Offset of mbuf dynamic field for protocol extraction data */
> > +__rte_experimental_var
> > extern int rte_net_ice_dynfield_proto_xtr_metadata_offs;
> >
> > /* Mask of mbuf dynamic flags for protocol extraction type */
> > diff --git a/lib/librte_cryptodev/rte_crypto_asym.h b/lib/librte_cryptodev/rte_crypto_asym.h
> > index 0d34ce8df..d4e84910f 100644
> > --- a/lib/librte_cryptodev/rte_crypto_asym.h
> > +++ b/lib/librte_cryptodev/rte_crypto_asym.h
> > @@ -24,6 +24,7 @@ extern "C" {
> > #include <rte_memory.h>
> > #include <rte_mempool.h>
> > #include <rte_common.h>
> > +#include <rte_compat.h>
> >
> > #include "rte_crypto_sym.h"
> >
> > @@ -37,10 +38,12 @@ typedef struct rte_crypto_param_t {
> > } rte_crypto_param;
> >
> > /** asym xform type name strings */
> > +__rte_experimental_var
> > extern const char *
> > rte_crypto_asym_xform_strings[];
> >
> > /** asym operations type name strings */
> > +__rte_experimental_var
> > extern const char *
> > rte_crypto_asym_op_strings[];
> >
> > diff --git a/lib/librte_eal/common/include/rte_compat.h b/lib/librte_eal/common/include/rte_compat.h
> > index 3eb33784b..3fd05179f 100644
> > --- a/lib/librte_eal/common/include/rte_compat.h
> > +++ b/lib/librte_eal/common/include/rte_compat.h
> > @@ -11,11 +11,16 @@
> > #define __rte_experimental \
> > __attribute__((deprecated("Symbol is not yet part of stable ABI"), \
> > section(".text.experimental")))
> > +#define __rte_experimental_var \
> > +__attribute__((deprecated("Symbol is not yet part of stable ABI"), \
> > +section(".data.experimental")))
> >
> > #else
> >
> > #define __rte_experimental \
> > __attribute__((section(".text.experimental")))
> > +#define __rte_experimental_var \
> > +__attribute__((section(".data.experimental")))
> >
> > #endif
> >
> > diff --git a/lib/librte_ethdev/rte_flow.h b/lib/librte_ethdev/rte_flow.h
> > index 452d359a1..c8ea71acc 100644
> > --- a/lib/librte_ethdev/rte_flow.h
> > +++ b/lib/librte_ethdev/rte_flow.h
> > @@ -19,6 +19,7 @@
> >
> > #include <rte_arp.h>
> > #include <rte_common.h>
> > +#include <rte_compat.h>
> > #include <rte_ether.h>
> > #include <rte_icmp.h>
> > #include <rte_ip.h>
> > @@ -2531,9 +2532,11 @@ struct rte_flow_action_set_meta {
> > };
> >
> > /* Mbuf dynamic field offset for metadata. */
> > +__rte_experimental_var
> > extern int rte_flow_dynf_metadata_offs;
> >
> > /* Mbuf dynamic field flag mask for metadata. */
> > +__rte_experimental_var
> > extern uint64_t rte_flow_dynf_metadata_mask;
> >
> > /* Mbuf dynamic field pointer for metadata. */
> > @@ -2548,14 +2551,24 @@ __rte_experimental
> > static inline uint32_t
> > rte_flow_dynf_metadata_get(struct rte_mbuf *m)
> > {
> > +#ifdef ALLOW_EXPERIMENTAL_API
> > return *RTE_FLOW_DYNF_METADATA(m);
> > +#else
> > + RTE_SET_USED(m);
> > + return 0;
> > +#endif
> > }
> >
> > __rte_experimental
> > static inline void
> > rte_flow_dynf_metadata_set(struct rte_mbuf *m, uint32_t v)
> > {
> > +#ifdef ALLOW_EXPERIMENTAL_API
> > *RTE_FLOW_DYNF_METADATA(m) = v;
> > +#else
> > + RTE_SET_USED(m);
> > + RTE_SET_USED(v);
> > +#endif
> > }
> >
> > /*
> > @@ -2800,7 +2813,11 @@ __rte_experimental
> > static inline int
> > rte_flow_dynf_metadata_avail(void)
> > {
> > +#ifdef ALLOW_EXPERIMENTAL_API
> > return !!rte_flow_dynf_metadata_mask;
> > +#else
> > + return 0;
> > +#endif
> > }
> >
> > /**
> > diff --git a/lib/librte_port/rte_port_eventdev.h b/lib/librte_port/rte_port_eventdev.h
> > index acf88f4e9..59246e204 100644
> > --- a/lib/librte_port/rte_port_eventdev.h
> > +++ b/lib/librte_port/rte_port_eventdev.h
> > @@ -25,6 +25,8 @@ extern "C" {
> > **/
> >
> > #include <stdint.h>
> > +
> > +#include <rte_compat.h>
> > #include <rte_eventdev.h>
> >
> > #include "rte_port.h"
> > @@ -39,6 +41,7 @@ struct rte_port_eventdev_reader_params {
> > };
> >
> > /** Eventdev_reader port operations. */
> > +__rte_experimental_var
> > extern struct rte_port_in_ops rte_port_eventdev_reader_ops;
> >
> > /** Eventdev_writer port parameters. */
> > @@ -63,6 +66,7 @@ struct rte_port_eventdev_writer_params {
> > };
> >
> > /** Eventdev_writer port operations. */
> > +__rte_experimental_var
> > extern struct rte_port_out_ops rte_port_eventdev_writer_ops;
> >
> > /** Event_writer_nodrop port parameters. */
> > @@ -90,6 +94,7 @@ struct rte_port_eventdev_writer_nodrop_params {
> > };
> >
> > /** Eventdev_writer_nodrop port operations. */
> > +__rte_experimental_var
> > extern struct rte_port_out_ops rte_port_eventdev_writer_nodrop_ops;
> >
> > #ifdef __cplusplus
> >
>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [dpdk-dev] [RFC PATCH] mark experimental variables
2019-11-25 16:13 [dpdk-dev] [RFC PATCH] mark experimental variables David Marchand
2019-11-26 9:25 ` Ray Kinsella
@ 2019-11-26 14:22 ` Neil Horman
2019-11-27 20:45 ` David Marchand
2019-12-02 15:20 ` [dpdk-dev] [PATCH] " David Marchand
2023-06-12 2:49 ` [dpdk-dev] [RFC PATCH] " Stephen Hemminger
3 siblings, 1 reply; 14+ messages in thread
From: Neil Horman @ 2019-11-26 14:22 UTC (permalink / raw)
To: David Marchand
Cc: dev, thomas, arybchenko, stable, Ray Kinsella, John McNamara,
Marko Kovacevic, Qiming Yang, Wenzhuo Lu, Declan Doherty,
Adrien Mazarguil, Ferruh Yigit, Cristian Dumitrescu
On Mon, Nov 25, 2019 at 05:13:14PM +0100, David Marchand wrote:
> So far, we did not pay attention to direct access to variables but they
> are part of the API/ABI too and should be clearly identified.
>
> Introduce a __rte_experimental_var tag and mark existing variables.
>
> Fixes: a4bcd61de82d ("buildtools: add script to check experimental API exports")
> Cc: stable@dpdk.org
>
> Signed-off-by: David Marchand <david.marchand@redhat.com>
> ---
> Quick patch to try to catch experimental variables.
> Not sure if we could use a single section, so please advise if there is
> better to do about this.
>
I don't see any definition of __rte_experimental_var here, won't the
preprocessor choke on this when you try to compile without that?
Neil
> ---
> buildtools/check-experimental-syms.sh | 17 +++++++++++++++--
> devtools/checkpatches.sh | 14 +++++++++-----
> doc/guides/contributing/abi_policy.rst | 7 ++++---
> drivers/net/ice/rte_pmd_ice.h | 3 +++
> lib/librte_cryptodev/rte_crypto_asym.h | 3 +++
> lib/librte_eal/common/include/rte_compat.h | 5 +++++
> lib/librte_ethdev/rte_flow.h | 17 +++++++++++++++++
> lib/librte_port/rte_port_eventdev.h | 5 +++++
> 8 files changed, 61 insertions(+), 10 deletions(-)
>
> diff --git a/buildtools/check-experimental-syms.sh b/buildtools/check-experimental-syms.sh
> index f3603e5ba..27f7b39f6 100755
> --- a/buildtools/check-experimental-syms.sh
> +++ b/buildtools/check-experimental-syms.sh
> @@ -34,13 +34,26 @@ do
> Please add __rte_experimental to the definition of $SYM
> END_OF_MESSAGE
> ret=1
> + elif grep -q "\.data.*[[:space:]]$SYM$" $DUMPFILE &&
> + ! grep -q "\.data\.experimental.*[[:space:]]$SYM$" $DUMPFILE
> + then
> + cat >&2 <<- END_OF_MESSAGE
> + $SYM is not flagged as experimental
> + but is listed in version map
> + Please add __rte_experimental_var to the definition of $SYM
> + END_OF_MESSAGE
> + ret=1
> fi
> done
>
> # Filter out symbols suffixed with a . for icc
> for SYM in `awk '{
> - if ($2 != "l" && $4 == ".text.experimental" && !($NF ~ /\.$/)) {
> - print $NF
> + if ($2 == "l" || $NF ~ /\.$/) {
> + next;
> + }
> + if ($4 == ".text.experimental" ||
> + $4 == ".data.experimental") {
> + print $NF;
> }
> }' $DUMPFILE`
> do
> diff --git a/devtools/checkpatches.sh b/devtools/checkpatches.sh
> index b16bace92..d3d02b8ce 100755
> --- a/devtools/checkpatches.sh
> +++ b/devtools/checkpatches.sh
> @@ -90,11 +90,15 @@ check_experimental_tags() { # <patch>
> "headers ("current_file")";
> ret = 1;
> }
> - if ($1 != "+__rte_experimental" || $2 != "") {
> - print "__rte_experimental must appear alone on the line" \
> - " immediately preceding the return type of a function."
> - ret = 1;
> +
> + if (NF == 1 && ($1 == "+__rte_experimental" ||
> + $1 == "+__rte_experimental_var")) {
> + next;
> }
> + print "__rte_experimental or __rte_experimental_var must " \
> + "appear alone on the line immediately preceding the " \
> + "return type of a function.";
> + ret = 1;
> }
> END {
> exit ret;
> @@ -178,7 +182,7 @@ check () { # <patch> <commit> <title>
> ret=1
> fi
>
> - ! $verbose || printf '\nChecking __rte_experimental tags:\n'
> + ! $verbose || printf '\nChecking __rte_experimental* tags:\n'
> report=$(check_experimental_tags "$tmpinput")
> if [ $? -ne 0 ] ; then
> $headline_printed || print_headline "$3"
> diff --git a/doc/guides/contributing/abi_policy.rst b/doc/guides/contributing/abi_policy.rst
> index 05ca95980..189ef6491 100644
> --- a/doc/guides/contributing/abi_policy.rst
> +++ b/doc/guides/contributing/abi_policy.rst
> @@ -300,9 +300,10 @@ Note that marking an API as experimental is a multi step process.
> To mark an API as experimental, the symbols which are desired to be exported
> must be placed in an EXPERIMENTAL version block in the corresponding libraries'
> version map script.
> -Secondly, the corresponding prototypes of those exported functions (in the
> -development header files), must be marked with the ``__rte_experimental`` tag
> -(see ``rte_compat.h``).
> +Secondly, the corresponding prototypes of those exported functions (resp.
> +variables) must be marked with the ``__rte_experimental`` (resp.
> +``__rte_experimental_var``) tag in the development header files (see
> +``rte_compat.h``).
> The DPDK build makefiles perform a check to ensure that the map file and the
> C code reflect the same list of symbols.
> This check can be circumvented by defining ``ALLOW_EXPERIMENTAL_API``
> diff --git a/drivers/net/ice/rte_pmd_ice.h b/drivers/net/ice/rte_pmd_ice.h
> index e254db053..dbd5586d4 100644
> --- a/drivers/net/ice/rte_pmd_ice.h
> +++ b/drivers/net/ice/rte_pmd_ice.h
> @@ -15,6 +15,8 @@
> */
>
> #include <stdio.h>
> +
> +#include <rte_compat.h>
> #include <rte_mbuf.h>
> #include <rte_mbuf_dyn.h>
>
> @@ -81,6 +83,7 @@ union rte_net_ice_proto_xtr_metadata {
> };
>
> /* Offset of mbuf dynamic field for protocol extraction data */
> +__rte_experimental_var
> extern int rte_net_ice_dynfield_proto_xtr_metadata_offs;
>
> /* Mask of mbuf dynamic flags for protocol extraction type */
> diff --git a/lib/librte_cryptodev/rte_crypto_asym.h b/lib/librte_cryptodev/rte_crypto_asym.h
> index 0d34ce8df..d4e84910f 100644
> --- a/lib/librte_cryptodev/rte_crypto_asym.h
> +++ b/lib/librte_cryptodev/rte_crypto_asym.h
> @@ -24,6 +24,7 @@ extern "C" {
> #include <rte_memory.h>
> #include <rte_mempool.h>
> #include <rte_common.h>
> +#include <rte_compat.h>
>
> #include "rte_crypto_sym.h"
>
> @@ -37,10 +38,12 @@ typedef struct rte_crypto_param_t {
> } rte_crypto_param;
>
> /** asym xform type name strings */
> +__rte_experimental_var
> extern const char *
> rte_crypto_asym_xform_strings[];
>
> /** asym operations type name strings */
> +__rte_experimental_var
> extern const char *
> rte_crypto_asym_op_strings[];
>
> diff --git a/lib/librte_eal/common/include/rte_compat.h b/lib/librte_eal/common/include/rte_compat.h
> index 3eb33784b..3fd05179f 100644
> --- a/lib/librte_eal/common/include/rte_compat.h
> +++ b/lib/librte_eal/common/include/rte_compat.h
> @@ -11,11 +11,16 @@
> #define __rte_experimental \
> __attribute__((deprecated("Symbol is not yet part of stable ABI"), \
> section(".text.experimental")))
> +#define __rte_experimental_var \
> +__attribute__((deprecated("Symbol is not yet part of stable ABI"), \
> +section(".data.experimental")))
>
> #else
>
> #define __rte_experimental \
> __attribute__((section(".text.experimental")))
> +#define __rte_experimental_var \
> +__attribute__((section(".data.experimental")))
>
> #endif
>
> diff --git a/lib/librte_ethdev/rte_flow.h b/lib/librte_ethdev/rte_flow.h
> index 452d359a1..c8ea71acc 100644
> --- a/lib/librte_ethdev/rte_flow.h
> +++ b/lib/librte_ethdev/rte_flow.h
> @@ -19,6 +19,7 @@
>
> #include <rte_arp.h>
> #include <rte_common.h>
> +#include <rte_compat.h>
> #include <rte_ether.h>
> #include <rte_icmp.h>
> #include <rte_ip.h>
> @@ -2531,9 +2532,11 @@ struct rte_flow_action_set_meta {
> };
>
> /* Mbuf dynamic field offset for metadata. */
> +__rte_experimental_var
> extern int rte_flow_dynf_metadata_offs;
>
> /* Mbuf dynamic field flag mask for metadata. */
> +__rte_experimental_var
> extern uint64_t rte_flow_dynf_metadata_mask;
>
> /* Mbuf dynamic field pointer for metadata. */
> @@ -2548,14 +2551,24 @@ __rte_experimental
> static inline uint32_t
> rte_flow_dynf_metadata_get(struct rte_mbuf *m)
> {
> +#ifdef ALLOW_EXPERIMENTAL_API
> return *RTE_FLOW_DYNF_METADATA(m);
> +#else
> + RTE_SET_USED(m);
> + return 0;
> +#endif
> }
>
> __rte_experimental
> static inline void
> rte_flow_dynf_metadata_set(struct rte_mbuf *m, uint32_t v)
> {
> +#ifdef ALLOW_EXPERIMENTAL_API
> *RTE_FLOW_DYNF_METADATA(m) = v;
> +#else
> + RTE_SET_USED(m);
> + RTE_SET_USED(v);
> +#endif
> }
>
> /*
> @@ -2800,7 +2813,11 @@ __rte_experimental
> static inline int
> rte_flow_dynf_metadata_avail(void)
> {
> +#ifdef ALLOW_EXPERIMENTAL_API
> return !!rte_flow_dynf_metadata_mask;
> +#else
> + return 0;
> +#endif
> }
>
> /**
> diff --git a/lib/librte_port/rte_port_eventdev.h b/lib/librte_port/rte_port_eventdev.h
> index acf88f4e9..59246e204 100644
> --- a/lib/librte_port/rte_port_eventdev.h
> +++ b/lib/librte_port/rte_port_eventdev.h
> @@ -25,6 +25,8 @@ extern "C" {
> **/
>
> #include <stdint.h>
> +
> +#include <rte_compat.h>
> #include <rte_eventdev.h>
>
> #include "rte_port.h"
> @@ -39,6 +41,7 @@ struct rte_port_eventdev_reader_params {
> };
>
> /** Eventdev_reader port operations. */
> +__rte_experimental_var
> extern struct rte_port_in_ops rte_port_eventdev_reader_ops;
>
> /** Eventdev_writer port parameters. */
> @@ -63,6 +66,7 @@ struct rte_port_eventdev_writer_params {
> };
>
> /** Eventdev_writer port operations. */
> +__rte_experimental_var
> extern struct rte_port_out_ops rte_port_eventdev_writer_ops;
>
> /** Event_writer_nodrop port parameters. */
> @@ -90,6 +94,7 @@ struct rte_port_eventdev_writer_nodrop_params {
> };
>
> /** Eventdev_writer_nodrop port operations. */
> +__rte_experimental_var
> extern struct rte_port_out_ops rte_port_eventdev_writer_nodrop_ops;
>
> #ifdef __cplusplus
> --
> 2.23.0
>
>
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [dpdk-dev] [RFC PATCH] mark experimental variables
2019-11-26 14:22 ` Neil Horman
@ 2019-11-27 20:45 ` David Marchand
2019-11-29 11:43 ` Neil Horman
0 siblings, 1 reply; 14+ messages in thread
From: David Marchand @ 2019-11-27 20:45 UTC (permalink / raw)
To: Neil Horman
Cc: dev, Thomas Monjalon, Andrew Rybchenko, dpdk stable,
Ray Kinsella, John McNamara, Marko Kovacevic, Qiming Yang,
Wenzhuo Lu, Declan Doherty, Adrien Mazarguil, Ferruh Yigit,
Cristian Dumitrescu
On Tue, Nov 26, 2019 at 3:22 PM Neil Horman <nhorman@tuxdriver.com> wrote:
> On Mon, Nov 25, 2019 at 05:13:14PM +0100, David Marchand wrote:
> > So far, we did not pay attention to direct access to variables but they
> > are part of the API/ABI too and should be clearly identified.
> >
> > Introduce a __rte_experimental_var tag and mark existing variables.
> >
> > Fixes: a4bcd61de82d ("buildtools: add script to check experimental API exports")
> > Cc: stable@dpdk.org
> >
> > Signed-off-by: David Marchand <david.marchand@redhat.com>
> > ---
> > Quick patch to try to catch experimental variables.
> > Not sure if we could use a single section, so please advise if there is
> > better to do about this.
> >
> I don't see any definition of __rte_experimental_var here, won't the
> preprocessor choke on this when you try to compile without that?
Sorry, not getting your point.
If there is an issue, then it is the same as __rte_experimental.
[snip]
> > diff --git a/lib/librte_eal/common/include/rte_compat.h b/lib/librte_eal/common/include/rte_compat.h
> > index 3eb33784b..3fd05179f 100644
> > --- a/lib/librte_eal/common/include/rte_compat.h
> > +++ b/lib/librte_eal/common/include/rte_compat.h
> > @@ -11,11 +11,16 @@
> > #define __rte_experimental \
> > __attribute__((deprecated("Symbol is not yet part of stable ABI"), \
> > section(".text.experimental")))
> > +#define __rte_experimental_var \
> > +__attribute__((deprecated("Symbol is not yet part of stable ABI"), \
> > +section(".data.experimental")))
> >
> > #else
> >
> > #define __rte_experimental \
> > __attribute__((section(".text.experimental")))
> > +#define __rte_experimental_var \
> > +__attribute__((section(".data.experimental")))
> >
> > #endif
> >
--
David Marchand
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [dpdk-dev] [RFC PATCH] mark experimental variables
2019-11-27 20:45 ` David Marchand
@ 2019-11-29 11:43 ` Neil Horman
2019-11-29 12:03 ` David Marchand
0 siblings, 1 reply; 14+ messages in thread
From: Neil Horman @ 2019-11-29 11:43 UTC (permalink / raw)
To: David Marchand
Cc: dev, Thomas Monjalon, Andrew Rybchenko, dpdk stable,
Ray Kinsella, John McNamara, Marko Kovacevic, Qiming Yang,
Wenzhuo Lu, Declan Doherty, Adrien Mazarguil, Ferruh Yigit,
Cristian Dumitrescu
On Wed, Nov 27, 2019 at 09:45:46PM +0100, David Marchand wrote:
> On Tue, Nov 26, 2019 at 3:22 PM Neil Horman <nhorman@tuxdriver.com> wrote:
> > On Mon, Nov 25, 2019 at 05:13:14PM +0100, David Marchand wrote:
> > > So far, we did not pay attention to direct access to variables but they
> > > are part of the API/ABI too and should be clearly identified.
> > >
> > > Introduce a __rte_experimental_var tag and mark existing variables.
> > >
> > > Fixes: a4bcd61de82d ("buildtools: add script to check experimental API exports")
> > > Cc: stable@dpdk.org
> > >
> > > Signed-off-by: David Marchand <david.marchand@redhat.com>
> > > ---
> > > Quick patch to try to catch experimental variables.
> > > Not sure if we could use a single section, so please advise if there is
> > > better to do about this.
> > >
> > I don't see any definition of __rte_experimental_var here, won't the
> > preprocessor choke on this when you try to compile without that?
>
> Sorry, not getting your point.
> If there is an issue, then it is the same as __rte_experimental.
>
No, there is no issue, I'm just blind. For some reason cscope wasn't finding
the definition of __rte_experimental_var when I applied your patch for me. Its
clear you have it below.
Acked-by: Neil Horman <nhorman@tuxdriver.com>
> [snip]
>
> > > diff --git a/lib/librte_eal/common/include/rte_compat.h b/lib/librte_eal/common/include/rte_compat.h
> > > index 3eb33784b..3fd05179f 100644
> > > --- a/lib/librte_eal/common/include/rte_compat.h
> > > +++ b/lib/librte_eal/common/include/rte_compat.h
> > > @@ -11,11 +11,16 @@
> > > #define __rte_experimental \
> > > __attribute__((deprecated("Symbol is not yet part of stable ABI"), \
> > > section(".text.experimental")))
> > > +#define __rte_experimental_var \
> > > +__attribute__((deprecated("Symbol is not yet part of stable ABI"), \
> > > +section(".data.experimental")))
> > >
> > > #else
> > >
> > > #define __rte_experimental \
> > > __attribute__((section(".text.experimental")))
> > > +#define __rte_experimental_var \
> > > +__attribute__((section(".data.experimental")))
> > >
> > > #endif
> > >
>
>
> --
> David Marchand
>
>
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [dpdk-dev] [RFC PATCH] mark experimental variables
2019-11-29 11:43 ` Neil Horman
@ 2019-11-29 12:03 ` David Marchand
0 siblings, 0 replies; 14+ messages in thread
From: David Marchand @ 2019-11-29 12:03 UTC (permalink / raw)
To: Neil Horman
Cc: dev, Thomas Monjalon, Andrew Rybchenko, dpdk stable,
Ray Kinsella, John McNamara, Marko Kovacevic, Qiming Yang,
Wenzhuo Lu, Declan Doherty, Adrien Mazarguil, Ferruh Yigit,
Cristian Dumitrescu
On Fri, Nov 29, 2019 at 12:43 PM Neil Horman <nhorman@tuxdriver.com> wrote:
>
> On Wed, Nov 27, 2019 at 09:45:46PM +0100, David Marchand wrote:
> > On Tue, Nov 26, 2019 at 3:22 PM Neil Horman <nhorman@tuxdriver.com> wrote:
> > > On Mon, Nov 25, 2019 at 05:13:14PM +0100, David Marchand wrote:
> > > > So far, we did not pay attention to direct access to variables but they
> > > > are part of the API/ABI too and should be clearly identified.
> > > >
> > > > Introduce a __rte_experimental_var tag and mark existing variables.
> > > >
> > > > Fixes: a4bcd61de82d ("buildtools: add script to check experimental API exports")
> > > > Cc: stable@dpdk.org
> > > >
> > > > Signed-off-by: David Marchand <david.marchand@redhat.com>
> > > > ---
> > > > Quick patch to try to catch experimental variables.
> > > > Not sure if we could use a single section, so please advise if there is
> > > > better to do about this.
> > > >
> > > I don't see any definition of __rte_experimental_var here, won't the
> > > preprocessor choke on this when you try to compile without that?
> >
> > Sorry, not getting your point.
> > If there is an issue, then it is the same as __rte_experimental.
> >
> No, there is no issue, I'm just blind. For some reason cscope wasn't finding
> the definition of __rte_experimental_var when I applied your patch for me. Its
> clear you have it below.
Ok, thanks for confirming.
> Acked-by: Neil Horman <nhorman@tuxdriver.com>
I will do an extra pass and submit a non RFC patch with your ack if I
have no change.
Thanks Neil.
--
David Marchand
^ permalink raw reply [flat|nested] 14+ messages in thread
* [dpdk-dev] [PATCH] mark experimental variables
2019-11-25 16:13 [dpdk-dev] [RFC PATCH] mark experimental variables David Marchand
2019-11-26 9:25 ` Ray Kinsella
2019-11-26 14:22 ` Neil Horman
@ 2019-12-02 15:20 ` David Marchand
2019-12-03 8:33 ` Andrew Rybchenko
` (2 more replies)
2023-06-12 2:49 ` [dpdk-dev] [RFC PATCH] " Stephen Hemminger
3 siblings, 3 replies; 14+ messages in thread
From: David Marchand @ 2019-12-02 15:20 UTC (permalink / raw)
To: nhorman, dev
Cc: thomas, arybchenko, mdr, stable, John McNamara, Marko Kovacevic,
Qiming Yang, Wenzhuo Lu, Nicolas Chautru, Declan Doherty,
Adrien Mazarguil, Ferruh Yigit, Cristian Dumitrescu,
Honnappa Nagarahalli
So far, we did not pay attention to direct access to variables but they
are part of the API/ABI too and should be clearly identified.
Introduce a __rte_experimental_var tag and mark existing exported
variables.
Fixes: a4bcd61de82d ("buildtools: add script to check experimental API exports")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
---
Changelog since RFC:
- s/resp\./or/ in documentation,
- caught more variables by looking at the *COM* section,
---
buildtools/check-experimental-syms.sh | 17 +++++++++++++++--
devtools/checkpatches.sh | 16 ++++++++++++----
doc/guides/contributing/abi_policy.rst | 7 ++++---
drivers/net/ice/rte_pmd_ice.h | 8 ++++++++
lib/librte_bbdev/rte_bbdev.h | 1 +
lib/librte_cryptodev/rte_crypto_asym.h | 3 +++
lib/librte_eal/common/include/rte_compat.h | 5 +++++
lib/librte_ethdev/rte_flow.h | 17 +++++++++++++++++
lib/librte_port/rte_port_eventdev.h | 5 +++++
lib/librte_rcu/rte_rcu_qsbr.h | 1 +
10 files changed, 71 insertions(+), 9 deletions(-)
diff --git a/buildtools/check-experimental-syms.sh b/buildtools/check-experimental-syms.sh
index f3603e5ba..f3a2f92fb 100755
--- a/buildtools/check-experimental-syms.sh
+++ b/buildtools/check-experimental-syms.sh
@@ -34,13 +34,26 @@ do
Please add __rte_experimental to the definition of $SYM
END_OF_MESSAGE
ret=1
+ elif grep -qe "\(\.data\|\*COM\*\).*[[:space:]]$SYM$" $DUMPFILE &&
+ ! grep -q "\.data\.experimental.*[[:space:]]$SYM$" $DUMPFILE
+ then
+ cat >&2 <<- END_OF_MESSAGE
+ $SYM is not flagged as experimental
+ but is listed in version map
+ Please add __rte_experimental_var to the definition of $SYM
+ END_OF_MESSAGE
+ ret=1
fi
done
# Filter out symbols suffixed with a . for icc
for SYM in `awk '{
- if ($2 != "l" && $4 == ".text.experimental" && !($NF ~ /\.$/)) {
- print $NF
+ if ($2 == "l" || $NF ~ /\.$/) {
+ next;
+ }
+ if ($4 == ".text.experimental" ||
+ $4 == ".data.experimental") {
+ print $NF;
}
}' $DUMPFILE`
do
diff --git a/devtools/checkpatches.sh b/devtools/checkpatches.sh
index b16bace92..92b0ae40a 100755
--- a/devtools/checkpatches.sh
+++ b/devtools/checkpatches.sh
@@ -90,11 +90,19 @@ check_experimental_tags() { # <patch>
"headers ("current_file")";
ret = 1;
}
- if ($1 != "+__rte_experimental" || $2 != "") {
+
+ if (NF == 1 && ($1 == "+__rte_experimental" ||
+ $1 == "+__rte_experimental_var")) {
+ next;
+ }
+ if ($0 ~ "__rte_experimental_var") {
+ print "__rte_experimental_var must appear alone on the line" \
+ " immediately preceding the type of a variable.";
+ } else {
print "__rte_experimental must appear alone on the line" \
- " immediately preceding the return type of a function."
- ret = 1;
+ " immediately preceding the return type of a function.";
}
+ ret = 1;
}
END {
exit ret;
@@ -178,7 +186,7 @@ check () { # <patch> <commit> <title>
ret=1
fi
- ! $verbose || printf '\nChecking __rte_experimental tags:\n'
+ ! $verbose || printf '\nChecking __rte_experimental* tags:\n'
report=$(check_experimental_tags "$tmpinput")
if [ $? -ne 0 ] ; then
$headline_printed || print_headline "$3"
diff --git a/doc/guides/contributing/abi_policy.rst b/doc/guides/contributing/abi_policy.rst
index 05ca95980..f933234d6 100644
--- a/doc/guides/contributing/abi_policy.rst
+++ b/doc/guides/contributing/abi_policy.rst
@@ -300,9 +300,10 @@ Note that marking an API as experimental is a multi step process.
To mark an API as experimental, the symbols which are desired to be exported
must be placed in an EXPERIMENTAL version block in the corresponding libraries'
version map script.
-Secondly, the corresponding prototypes of those exported functions (in the
-development header files), must be marked with the ``__rte_experimental`` tag
-(see ``rte_compat.h``).
+Secondly, the corresponding prototypes of those exported functions (or
+variables) must be marked with the ``__rte_experimental`` (or
+``__rte_experimental_var``) tag in the development header files (see
+``rte_compat.h``).
The DPDK build makefiles perform a check to ensure that the map file and the
C code reflect the same list of symbols.
This check can be circumvented by defining ``ALLOW_EXPERIMENTAL_API``
diff --git a/drivers/net/ice/rte_pmd_ice.h b/drivers/net/ice/rte_pmd_ice.h
index e254db053..a5c80c43c 100644
--- a/drivers/net/ice/rte_pmd_ice.h
+++ b/drivers/net/ice/rte_pmd_ice.h
@@ -15,6 +15,8 @@
*/
#include <stdio.h>
+
+#include <rte_compat.h>
#include <rte_mbuf.h>
#include <rte_mbuf_dyn.h>
@@ -81,13 +83,19 @@ union rte_net_ice_proto_xtr_metadata {
};
/* Offset of mbuf dynamic field for protocol extraction data */
+__rte_experimental_var
extern int rte_net_ice_dynfield_proto_xtr_metadata_offs;
/* Mask of mbuf dynamic flags for protocol extraction type */
+__rte_experimental_var
extern uint64_t rte_net_ice_dynflag_proto_xtr_vlan_mask;
+__rte_experimental_var
extern uint64_t rte_net_ice_dynflag_proto_xtr_ipv4_mask;
+__rte_experimental_var
extern uint64_t rte_net_ice_dynflag_proto_xtr_ipv6_mask;
+__rte_experimental_var
extern uint64_t rte_net_ice_dynflag_proto_xtr_ipv6_flow_mask;
+__rte_experimental_var
extern uint64_t rte_net_ice_dynflag_proto_xtr_tcp_mask;
/**
diff --git a/lib/librte_bbdev/rte_bbdev.h b/lib/librte_bbdev/rte_bbdev.h
index 591fb7914..e044dec88 100644
--- a/lib/librte_bbdev/rte_bbdev.h
+++ b/lib/librte_bbdev/rte_bbdev.h
@@ -466,6 +466,7 @@ struct __rte_cache_aligned rte_bbdev {
};
/** @internal array of all devices */
+__rte_experimental_var
extern struct rte_bbdev rte_bbdev_devices[];
/**
diff --git a/lib/librte_cryptodev/rte_crypto_asym.h b/lib/librte_cryptodev/rte_crypto_asym.h
index 0d34ce8df..d4e84910f 100644
--- a/lib/librte_cryptodev/rte_crypto_asym.h
+++ b/lib/librte_cryptodev/rte_crypto_asym.h
@@ -24,6 +24,7 @@ extern "C" {
#include <rte_memory.h>
#include <rte_mempool.h>
#include <rte_common.h>
+#include <rte_compat.h>
#include "rte_crypto_sym.h"
@@ -37,10 +38,12 @@ typedef struct rte_crypto_param_t {
} rte_crypto_param;
/** asym xform type name strings */
+__rte_experimental_var
extern const char *
rte_crypto_asym_xform_strings[];
/** asym operations type name strings */
+__rte_experimental_var
extern const char *
rte_crypto_asym_op_strings[];
diff --git a/lib/librte_eal/common/include/rte_compat.h b/lib/librte_eal/common/include/rte_compat.h
index 3eb33784b..3fd05179f 100644
--- a/lib/librte_eal/common/include/rte_compat.h
+++ b/lib/librte_eal/common/include/rte_compat.h
@@ -11,11 +11,16 @@
#define __rte_experimental \
__attribute__((deprecated("Symbol is not yet part of stable ABI"), \
section(".text.experimental")))
+#define __rte_experimental_var \
+__attribute__((deprecated("Symbol is not yet part of stable ABI"), \
+section(".data.experimental")))
#else
#define __rte_experimental \
__attribute__((section(".text.experimental")))
+#define __rte_experimental_var \
+__attribute__((section(".data.experimental")))
#endif
diff --git a/lib/librte_ethdev/rte_flow.h b/lib/librte_ethdev/rte_flow.h
index 452d359a1..c8ea71acc 100644
--- a/lib/librte_ethdev/rte_flow.h
+++ b/lib/librte_ethdev/rte_flow.h
@@ -19,6 +19,7 @@
#include <rte_arp.h>
#include <rte_common.h>
+#include <rte_compat.h>
#include <rte_ether.h>
#include <rte_icmp.h>
#include <rte_ip.h>
@@ -2531,9 +2532,11 @@ struct rte_flow_action_set_meta {
};
/* Mbuf dynamic field offset for metadata. */
+__rte_experimental_var
extern int rte_flow_dynf_metadata_offs;
/* Mbuf dynamic field flag mask for metadata. */
+__rte_experimental_var
extern uint64_t rte_flow_dynf_metadata_mask;
/* Mbuf dynamic field pointer for metadata. */
@@ -2548,14 +2551,24 @@ __rte_experimental
static inline uint32_t
rte_flow_dynf_metadata_get(struct rte_mbuf *m)
{
+#ifdef ALLOW_EXPERIMENTAL_API
return *RTE_FLOW_DYNF_METADATA(m);
+#else
+ RTE_SET_USED(m);
+ return 0;
+#endif
}
__rte_experimental
static inline void
rte_flow_dynf_metadata_set(struct rte_mbuf *m, uint32_t v)
{
+#ifdef ALLOW_EXPERIMENTAL_API
*RTE_FLOW_DYNF_METADATA(m) = v;
+#else
+ RTE_SET_USED(m);
+ RTE_SET_USED(v);
+#endif
}
/*
@@ -2800,7 +2813,11 @@ __rte_experimental
static inline int
rte_flow_dynf_metadata_avail(void)
{
+#ifdef ALLOW_EXPERIMENTAL_API
return !!rte_flow_dynf_metadata_mask;
+#else
+ return 0;
+#endif
}
/**
diff --git a/lib/librte_port/rte_port_eventdev.h b/lib/librte_port/rte_port_eventdev.h
index acf88f4e9..59246e204 100644
--- a/lib/librte_port/rte_port_eventdev.h
+++ b/lib/librte_port/rte_port_eventdev.h
@@ -25,6 +25,8 @@ extern "C" {
**/
#include <stdint.h>
+
+#include <rte_compat.h>
#include <rte_eventdev.h>
#include "rte_port.h"
@@ -39,6 +41,7 @@ struct rte_port_eventdev_reader_params {
};
/** Eventdev_reader port operations. */
+__rte_experimental_var
extern struct rte_port_in_ops rte_port_eventdev_reader_ops;
/** Eventdev_writer port parameters. */
@@ -63,6 +66,7 @@ struct rte_port_eventdev_writer_params {
};
/** Eventdev_writer port operations. */
+__rte_experimental_var
extern struct rte_port_out_ops rte_port_eventdev_writer_ops;
/** Event_writer_nodrop port parameters. */
@@ -90,6 +94,7 @@ struct rte_port_eventdev_writer_nodrop_params {
};
/** Eventdev_writer_nodrop port operations. */
+__rte_experimental_var
extern struct rte_port_out_ops rte_port_eventdev_writer_nodrop_ops;
#ifdef __cplusplus
diff --git a/lib/librte_rcu/rte_rcu_qsbr.h b/lib/librte_rcu/rte_rcu_qsbr.h
index 0b5585925..55c100673 100644
--- a/lib/librte_rcu/rte_rcu_qsbr.h
+++ b/lib/librte_rcu/rte_rcu_qsbr.h
@@ -35,6 +35,7 @@ extern "C" {
#include <rte_debug.h>
#include <rte_atomic.h>
+__rte_experimental_var
extern int rte_rcu_log_type;
#if RTE_LOG_DP_LEVEL >= RTE_LOG_DEBUG
--
2.23.0
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [dpdk-dev] [PATCH] mark experimental variables
2019-12-02 15:20 ` [dpdk-dev] [PATCH] " David Marchand
@ 2019-12-03 8:33 ` Andrew Rybchenko
2019-12-03 15:26 ` Neil Horman
2020-01-09 14:13 ` [dpdk-dev] [dpdk-stable] " Thomas Monjalon
2 siblings, 0 replies; 14+ messages in thread
From: Andrew Rybchenko @ 2019-12-03 8:33 UTC (permalink / raw)
To: David Marchand, nhorman, dev
Cc: thomas, mdr, stable, John McNamara, Marko Kovacevic, Qiming Yang,
Wenzhuo Lu, Nicolas Chautru, Declan Doherty, Adrien Mazarguil,
Ferruh Yigit, Cristian Dumitrescu, Honnappa Nagarahalli
On 12/2/19 6:20 PM, David Marchand wrote:
> So far, we did not pay attention to direct access to variables but they
> are part of the API/ABI too and should be clearly identified.
>
> Introduce a __rte_experimental_var tag and mark existing exported
> variables.
>
> Fixes: a4bcd61de82d ("buildtools: add script to check experimental API exports")
> Cc: stable@dpdk.org
>
> Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [dpdk-dev] [PATCH] mark experimental variables
2019-12-02 15:20 ` [dpdk-dev] [PATCH] " David Marchand
2019-12-03 8:33 ` Andrew Rybchenko
@ 2019-12-03 15:26 ` Neil Horman
2020-01-09 14:13 ` [dpdk-dev] [dpdk-stable] " Thomas Monjalon
2 siblings, 0 replies; 14+ messages in thread
From: Neil Horman @ 2019-12-03 15:26 UTC (permalink / raw)
To: David Marchand
Cc: dev, thomas, arybchenko, mdr, stable, John McNamara,
Marko Kovacevic, Qiming Yang, Wenzhuo Lu, Nicolas Chautru,
Declan Doherty, Adrien Mazarguil, Ferruh Yigit,
Cristian Dumitrescu, Honnappa Nagarahalli
On Mon, Dec 02, 2019 at 04:20:29PM +0100, David Marchand wrote:
> So far, we did not pay attention to direct access to variables but they
> are part of the API/ABI too and should be clearly identified.
>
> Introduce a __rte_experimental_var tag and mark existing exported
> variables.
>
> Fixes: a4bcd61de82d ("buildtools: add script to check experimental API exports")
> Cc: stable@dpdk.org
>
> Signed-off-by: David Marchand <david.marchand@redhat.com>
> ---
> Changelog since RFC:
> - s/resp\./or/ in documentation,
> - caught more variables by looking at the *COM* section,
>
> ---
> buildtools/check-experimental-syms.sh | 17 +++++++++++++++--
> devtools/checkpatches.sh | 16 ++++++++++++----
> doc/guides/contributing/abi_policy.rst | 7 ++++---
> drivers/net/ice/rte_pmd_ice.h | 8 ++++++++
> lib/librte_bbdev/rte_bbdev.h | 1 +
> lib/librte_cryptodev/rte_crypto_asym.h | 3 +++
> lib/librte_eal/common/include/rte_compat.h | 5 +++++
> lib/librte_ethdev/rte_flow.h | 17 +++++++++++++++++
> lib/librte_port/rte_port_eventdev.h | 5 +++++
> lib/librte_rcu/rte_rcu_qsbr.h | 1 +
> 10 files changed, 71 insertions(+), 9 deletions(-)
>
> diff --git a/buildtools/check-experimental-syms.sh b/buildtools/check-experimental-syms.sh
> index f3603e5ba..f3a2f92fb 100755
> --- a/buildtools/check-experimental-syms.sh
> +++ b/buildtools/check-experimental-syms.sh
> @@ -34,13 +34,26 @@ do
> Please add __rte_experimental to the definition of $SYM
> END_OF_MESSAGE
> ret=1
> + elif grep -qe "\(\.data\|\*COM\*\).*[[:space:]]$SYM$" $DUMPFILE &&
> + ! grep -q "\.data\.experimental.*[[:space:]]$SYM$" $DUMPFILE
> + then
> + cat >&2 <<- END_OF_MESSAGE
> + $SYM is not flagged as experimental
> + but is listed in version map
> + Please add __rte_experimental_var to the definition of $SYM
> + END_OF_MESSAGE
> + ret=1
> fi
> done
>
> # Filter out symbols suffixed with a . for icc
> for SYM in `awk '{
> - if ($2 != "l" && $4 == ".text.experimental" && !($NF ~ /\.$/)) {
> - print $NF
> + if ($2 == "l" || $NF ~ /\.$/) {
> + next;
> + }
> + if ($4 == ".text.experimental" ||
> + $4 == ".data.experimental") {
> + print $NF;
> }
> }' $DUMPFILE`
> do
> diff --git a/devtools/checkpatches.sh b/devtools/checkpatches.sh
> index b16bace92..92b0ae40a 100755
> --- a/devtools/checkpatches.sh
> +++ b/devtools/checkpatches.sh
> @@ -90,11 +90,19 @@ check_experimental_tags() { # <patch>
> "headers ("current_file")";
> ret = 1;
> }
> - if ($1 != "+__rte_experimental" || $2 != "") {
> +
> + if (NF == 1 && ($1 == "+__rte_experimental" ||
> + $1 == "+__rte_experimental_var")) {
> + next;
> + }
> + if ($0 ~ "__rte_experimental_var") {
> + print "__rte_experimental_var must appear alone on the line" \
> + " immediately preceding the type of a variable.";
> + } else {
> print "__rte_experimental must appear alone on the line" \
> - " immediately preceding the return type of a function."
> - ret = 1;
> + " immediately preceding the return type of a function.";
> }
> + ret = 1;
> }
> END {
> exit ret;
> @@ -178,7 +186,7 @@ check () { # <patch> <commit> <title>
> ret=1
> fi
>
> - ! $verbose || printf '\nChecking __rte_experimental tags:\n'
> + ! $verbose || printf '\nChecking __rte_experimental* tags:\n'
> report=$(check_experimental_tags "$tmpinput")
> if [ $? -ne 0 ] ; then
> $headline_printed || print_headline "$3"
> diff --git a/doc/guides/contributing/abi_policy.rst b/doc/guides/contributing/abi_policy.rst
> index 05ca95980..f933234d6 100644
> --- a/doc/guides/contributing/abi_policy.rst
> +++ b/doc/guides/contributing/abi_policy.rst
> @@ -300,9 +300,10 @@ Note that marking an API as experimental is a multi step process.
> To mark an API as experimental, the symbols which are desired to be exported
> must be placed in an EXPERIMENTAL version block in the corresponding libraries'
> version map script.
> -Secondly, the corresponding prototypes of those exported functions (in the
> -development header files), must be marked with the ``__rte_experimental`` tag
> -(see ``rte_compat.h``).
> +Secondly, the corresponding prototypes of those exported functions (or
> +variables) must be marked with the ``__rte_experimental`` (or
> +``__rte_experimental_var``) tag in the development header files (see
> +``rte_compat.h``).
> The DPDK build makefiles perform a check to ensure that the map file and the
> C code reflect the same list of symbols.
> This check can be circumvented by defining ``ALLOW_EXPERIMENTAL_API``
> diff --git a/drivers/net/ice/rte_pmd_ice.h b/drivers/net/ice/rte_pmd_ice.h
> index e254db053..a5c80c43c 100644
> --- a/drivers/net/ice/rte_pmd_ice.h
> +++ b/drivers/net/ice/rte_pmd_ice.h
> @@ -15,6 +15,8 @@
> */
>
> #include <stdio.h>
> +
> +#include <rte_compat.h>
> #include <rte_mbuf.h>
> #include <rte_mbuf_dyn.h>
>
> @@ -81,13 +83,19 @@ union rte_net_ice_proto_xtr_metadata {
> };
>
> /* Offset of mbuf dynamic field for protocol extraction data */
> +__rte_experimental_var
> extern int rte_net_ice_dynfield_proto_xtr_metadata_offs;
>
> /* Mask of mbuf dynamic flags for protocol extraction type */
> +__rte_experimental_var
> extern uint64_t rte_net_ice_dynflag_proto_xtr_vlan_mask;
> +__rte_experimental_var
> extern uint64_t rte_net_ice_dynflag_proto_xtr_ipv4_mask;
> +__rte_experimental_var
> extern uint64_t rte_net_ice_dynflag_proto_xtr_ipv6_mask;
> +__rte_experimental_var
> extern uint64_t rte_net_ice_dynflag_proto_xtr_ipv6_flow_mask;
> +__rte_experimental_var
> extern uint64_t rte_net_ice_dynflag_proto_xtr_tcp_mask;
>
> /**
> diff --git a/lib/librte_bbdev/rte_bbdev.h b/lib/librte_bbdev/rte_bbdev.h
> index 591fb7914..e044dec88 100644
> --- a/lib/librte_bbdev/rte_bbdev.h
> +++ b/lib/librte_bbdev/rte_bbdev.h
> @@ -466,6 +466,7 @@ struct __rte_cache_aligned rte_bbdev {
> };
>
> /** @internal array of all devices */
> +__rte_experimental_var
> extern struct rte_bbdev rte_bbdev_devices[];
>
> /**
> diff --git a/lib/librte_cryptodev/rte_crypto_asym.h b/lib/librte_cryptodev/rte_crypto_asym.h
> index 0d34ce8df..d4e84910f 100644
> --- a/lib/librte_cryptodev/rte_crypto_asym.h
> +++ b/lib/librte_cryptodev/rte_crypto_asym.h
> @@ -24,6 +24,7 @@ extern "C" {
> #include <rte_memory.h>
> #include <rte_mempool.h>
> #include <rte_common.h>
> +#include <rte_compat.h>
>
> #include "rte_crypto_sym.h"
>
> @@ -37,10 +38,12 @@ typedef struct rte_crypto_param_t {
> } rte_crypto_param;
>
> /** asym xform type name strings */
> +__rte_experimental_var
> extern const char *
> rte_crypto_asym_xform_strings[];
>
> /** asym operations type name strings */
> +__rte_experimental_var
> extern const char *
> rte_crypto_asym_op_strings[];
>
> diff --git a/lib/librte_eal/common/include/rte_compat.h b/lib/librte_eal/common/include/rte_compat.h
> index 3eb33784b..3fd05179f 100644
> --- a/lib/librte_eal/common/include/rte_compat.h
> +++ b/lib/librte_eal/common/include/rte_compat.h
> @@ -11,11 +11,16 @@
> #define __rte_experimental \
> __attribute__((deprecated("Symbol is not yet part of stable ABI"), \
> section(".text.experimental")))
> +#define __rte_experimental_var \
> +__attribute__((deprecated("Symbol is not yet part of stable ABI"), \
> +section(".data.experimental")))
>
> #else
>
> #define __rte_experimental \
> __attribute__((section(".text.experimental")))
> +#define __rte_experimental_var \
> +__attribute__((section(".data.experimental")))
>
> #endif
>
> diff --git a/lib/librte_ethdev/rte_flow.h b/lib/librte_ethdev/rte_flow.h
> index 452d359a1..c8ea71acc 100644
> --- a/lib/librte_ethdev/rte_flow.h
> +++ b/lib/librte_ethdev/rte_flow.h
> @@ -19,6 +19,7 @@
>
> #include <rte_arp.h>
> #include <rte_common.h>
> +#include <rte_compat.h>
> #include <rte_ether.h>
> #include <rte_icmp.h>
> #include <rte_ip.h>
> @@ -2531,9 +2532,11 @@ struct rte_flow_action_set_meta {
> };
>
> /* Mbuf dynamic field offset for metadata. */
> +__rte_experimental_var
> extern int rte_flow_dynf_metadata_offs;
>
> /* Mbuf dynamic field flag mask for metadata. */
> +__rte_experimental_var
> extern uint64_t rte_flow_dynf_metadata_mask;
>
> /* Mbuf dynamic field pointer for metadata. */
> @@ -2548,14 +2551,24 @@ __rte_experimental
> static inline uint32_t
> rte_flow_dynf_metadata_get(struct rte_mbuf *m)
> {
> +#ifdef ALLOW_EXPERIMENTAL_API
> return *RTE_FLOW_DYNF_METADATA(m);
> +#else
> + RTE_SET_USED(m);
> + return 0;
> +#endif
> }
>
> __rte_experimental
> static inline void
> rte_flow_dynf_metadata_set(struct rte_mbuf *m, uint32_t v)
> {
> +#ifdef ALLOW_EXPERIMENTAL_API
> *RTE_FLOW_DYNF_METADATA(m) = v;
> +#else
> + RTE_SET_USED(m);
> + RTE_SET_USED(v);
> +#endif
> }
>
> /*
> @@ -2800,7 +2813,11 @@ __rte_experimental
> static inline int
> rte_flow_dynf_metadata_avail(void)
> {
> +#ifdef ALLOW_EXPERIMENTAL_API
> return !!rte_flow_dynf_metadata_mask;
> +#else
> + return 0;
> +#endif
> }
>
> /**
> diff --git a/lib/librte_port/rte_port_eventdev.h b/lib/librte_port/rte_port_eventdev.h
> index acf88f4e9..59246e204 100644
> --- a/lib/librte_port/rte_port_eventdev.h
> +++ b/lib/librte_port/rte_port_eventdev.h
> @@ -25,6 +25,8 @@ extern "C" {
> **/
>
> #include <stdint.h>
> +
> +#include <rte_compat.h>
> #include <rte_eventdev.h>
>
> #include "rte_port.h"
> @@ -39,6 +41,7 @@ struct rte_port_eventdev_reader_params {
> };
>
> /** Eventdev_reader port operations. */
> +__rte_experimental_var
> extern struct rte_port_in_ops rte_port_eventdev_reader_ops;
>
> /** Eventdev_writer port parameters. */
> @@ -63,6 +66,7 @@ struct rte_port_eventdev_writer_params {
> };
>
> /** Eventdev_writer port operations. */
> +__rte_experimental_var
> extern struct rte_port_out_ops rte_port_eventdev_writer_ops;
>
> /** Event_writer_nodrop port parameters. */
> @@ -90,6 +94,7 @@ struct rte_port_eventdev_writer_nodrop_params {
> };
>
> /** Eventdev_writer_nodrop port operations. */
> +__rte_experimental_var
> extern struct rte_port_out_ops rte_port_eventdev_writer_nodrop_ops;
>
> #ifdef __cplusplus
> diff --git a/lib/librte_rcu/rte_rcu_qsbr.h b/lib/librte_rcu/rte_rcu_qsbr.h
> index 0b5585925..55c100673 100644
> --- a/lib/librte_rcu/rte_rcu_qsbr.h
> +++ b/lib/librte_rcu/rte_rcu_qsbr.h
> @@ -35,6 +35,7 @@ extern "C" {
> #include <rte_debug.h>
> #include <rte_atomic.h>
>
> +__rte_experimental_var
> extern int rte_rcu_log_type;
>
> #if RTE_LOG_DP_LEVEL >= RTE_LOG_DEBUG
> --
> 2.23.0
>
>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [dpdk-dev] [dpdk-stable] [PATCH] mark experimental variables
2019-12-02 15:20 ` [dpdk-dev] [PATCH] " David Marchand
2019-12-03 8:33 ` Andrew Rybchenko
2019-12-03 15:26 ` Neil Horman
@ 2020-01-09 14:13 ` Thomas Monjalon
2020-01-09 16:49 ` David Marchand
2 siblings, 1 reply; 14+ messages in thread
From: Thomas Monjalon @ 2020-01-09 14:13 UTC (permalink / raw)
To: David Marchand
Cc: nhorman, dev, stable, arybchenko, mdr, stable, John McNamara,
Marko Kovacevic, Qiming Yang, Wenzhuo Lu, Nicolas Chautru,
Declan Doherty, Adrien Mazarguil, Ferruh Yigit,
Cristian Dumitrescu, Honnappa Nagarahalli
02/12/2019 16:20, David Marchand:
> So far, we did not pay attention to direct access to variables but they
> are part of the API/ABI too and should be clearly identified.
>
> Introduce a __rte_experimental_var tag and mark existing exported
> variables.
>
> Fixes: a4bcd61de82d ("buildtools: add script to check experimental API exports")
> Cc: stable@dpdk.org
>
> Signed-off-by: David Marchand <david.marchand@redhat.com>
> ---
> + elif grep -qe "\(\.data\|\*COM\*\).*[[:space:]]$SYM$" $DUMPFILE &&
> + ! grep -q "\.data\.experimental.*[[:space:]]$SYM$" $DUMPFILE
I like such regex ;)
I don't know COM section but I am not an ELF expert.
Maybe you can just add a comment in the commit log about searching
the symbol in .data and COM sections, even if we don't know exactly why.
One more comment for the record,
I would like we avoid having some variables in the ABI.
Feel free to push this patch.
Acked-by: Thomas Monjalon <thomas@monjalon.net>
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [dpdk-dev] [dpdk-stable] [PATCH] mark experimental variables
2020-01-09 14:13 ` [dpdk-dev] [dpdk-stable] " Thomas Monjalon
@ 2020-01-09 16:49 ` David Marchand
0 siblings, 0 replies; 14+ messages in thread
From: David Marchand @ 2020-01-09 16:49 UTC (permalink / raw)
To: Thomas Monjalon, Neil Horman
Cc: dev, dpdk stable, Andrew Rybchenko, Ray Kinsella, John McNamara,
Marko Kovacevic, Qiming Yang, Wenzhuo Lu, Nicolas Chautru,
Declan Doherty, Adrien Mazarguil, Ferruh Yigit,
Cristian Dumitrescu, Honnappa Nagarahalli
On Thu, Jan 9, 2020 at 3:13 PM Thomas Monjalon <thomas@monjalon.net> wrote:
>
> 02/12/2019 16:20, David Marchand:
> > So far, we did not pay attention to direct access to variables but they
> > are part of the API/ABI too and should be clearly identified.
> >
> > Introduce a __rte_experimental_var tag and mark existing exported
> > variables.
> >
> > Fixes: a4bcd61de82d ("buildtools: add script to check experimental API exports")
> > Cc: stable@dpdk.org
> >
> > Signed-off-by: David Marchand <david.marchand@redhat.com>
> > ---
> > + elif grep -qe "\(\.data\|\*COM\*\).*[[:space:]]$SYM$" $DUMPFILE &&
> > + ! grep -q "\.data\.experimental.*[[:space:]]$SYM$" $DUMPFILE
>
> I like such regex ;)
Err.. thanks?
> I don't know COM section but I am not an ELF expert.
I am no ELF expert either.
IIUC, this section is a special one used when generating object files
for common symbols but the compiler is not sure where the actual
symbol should go.
It is then resolved as .data or .bss when linking.
> Maybe you can just add a comment in the commit log about searching
> the symbol in .data and COM sections, even if we don't know exactly why.
Actually, this is a good thing you asked about it.
I did a new check before/after the series.
Example for rte_net_ice_dynflag_proto_xtr_vlan_mask.
Before:
/home/dmarchan/builds/build-gcc-shared/drivers/a715181@@tmp_rte_pmd_ice@sta/net_ice_ice_rxtx.c.o
0000000000000008 O *COM* 0000000000000008
rte_net_ice_dynflag_proto_xtr_vlan_mask
/home/dmarchan/builds/build-gcc-shared/drivers/a715181@@tmp_rte_pmd_ice@sta/net_ice_ice_ethdev.c.o
0000000000000000 *UND* 0000000000000000
rte_net_ice_dynflag_proto_xtr_vlan_mask
/home/dmarchan/builds/build-gcc-shared/drivers/libtmp_rte_pmd_ice.a
0000000000000000 *UND* 0000000000000000
rte_net_ice_dynflag_proto_xtr_vlan_mask
0000000000000008 O *COM* 0000000000000008
rte_net_ice_dynflag_proto_xtr_vlan_mask
/home/dmarchan/builds/build-gcc-shared/drivers/librte_pmd_ice.a
0000000000000000 *UND* 0000000000000000
rte_net_ice_dynflag_proto_xtr_vlan_mask
0000000000000008 O *COM* 0000000000000008
rte_net_ice_dynflag_proto_xtr_vlan_mask
/home/dmarchan/builds/build-gcc-shared/drivers/librte_pmd_ice.so.20.0.1
0000000000063890 g O .bss 0000000000000008
rte_net_ice_dynflag_proto_xtr_vlan_mask
After:
/home/dmarchan/builds/build-gcc-shared/drivers/a715181@@tmp_rte_pmd_ice@sta/net_ice_ice_rxtx.c.o
0000000000000020 g O .data.experimental 0000000000000008
rte_net_ice_dynflag_proto_xtr_vlan_mask
/home/dmarchan/builds/build-gcc-shared/drivers/a715181@@tmp_rte_pmd_ice@sta/net_ice_ice_ethdev.c.o
0000000000000000 *UND* 0000000000000000
rte_net_ice_dynflag_proto_xtr_vlan_mask
/home/dmarchan/builds/build-gcc-shared/drivers/libtmp_rte_pmd_ice.a
0000000000000000 *UND* 0000000000000000
rte_net_ice_dynflag_proto_xtr_vlan_mask
0000000000000020 g O .data.experimental 0000000000000008
rte_net_ice_dynflag_proto_xtr_vlan_mask
/home/dmarchan/builds/build-gcc-shared/drivers/librte_pmd_ice.a
0000000000000000 *UND* 0000000000000000
rte_net_ice_dynflag_proto_xtr_vlan_mask
0000000000000020 g O .data.experimental 0000000000000008
rte_net_ice_dynflag_proto_xtr_vlan_mask
/home/dmarchan/builds/build-gcc-shared/drivers/librte_pmd_ice.so.20.0.1
00000000000604f0 g O .data 0000000000000008
rte_net_ice_dynflag_proto_xtr_vlan_mask
The thing that scares me is that the final symbol gets moved from .bss
to .data in the .so.
Neil?
--
David Marchand
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [dpdk-dev] [RFC PATCH] mark experimental variables
2019-11-25 16:13 [dpdk-dev] [RFC PATCH] mark experimental variables David Marchand
` (2 preceding siblings ...)
2019-12-02 15:20 ` [dpdk-dev] [PATCH] " David Marchand
@ 2023-06-12 2:49 ` Stephen Hemminger
3 siblings, 0 replies; 14+ messages in thread
From: Stephen Hemminger @ 2023-06-12 2:49 UTC (permalink / raw)
To: David Marchand
Cc: nhorman, dev, thomas, arybchenko, stable, Ray Kinsella,
John McNamara, Marko Kovacevic, Qiming Yang, Wenzhuo Lu,
Declan Doherty, Adrien Mazarguil, Ferruh Yigit,
Cristian Dumitrescu
On Mon, 25 Nov 2019 17:13:14 +0100
David Marchand <david.marchand@redhat.com> wrote:
> So far, we did not pay attention to direct access to variables but they
> are part of the API/ABI too and should be clearly identified.
>
> Introduce a __rte_experimental_var tag and mark existing variables.
>
> Fixes: a4bcd61de82d ("buildtools: add script to check experimental API exports")
> Cc: stable@dpdk.org
>
> Signed-off-by: David Marchand <david.marchand@redhat.com>
> ---
> Quick patch to try to catch experimental variables.
> Not sure if we could use a single section, so please advise if there is
> better to do about this.
>
> ---
> buildtools/check-experimental-syms.sh | 17 +++++++++++++++--
> devtools/checkpatches.sh | 14 +++++++++-----
> doc/guides/contributing/abi_policy.rst | 7 ++++---
> drivers/net/ice/rte_pmd_ice.h | 3 +++
> lib/librte_cryptodev/rte_crypto_asym.h | 3 +++
> lib/librte_eal/common/include/rte_compat.h | 5 +++++
> lib/librte_ethdev/rte_flow.h | 17 +++++++++++++++++
> lib/librte_port/rte_port_eventdev.h | 5 +++++
> 8 files changed, 61 insertions(+), 10 deletions(-)
This is a good idea, but the patch has gone stale in 4 years.
Symbols have changed, directories have changed.
If someone wants to continue this, please rebase and recheck.
Marking the original patch with Changes Requested.
^ permalink raw reply [flat|nested] 14+ messages in thread