DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] [PATCH] config: disable iova phys for dpaa and 1588 for dpaa2
@ 2019-10-04 11:11 Nipun Gupta
  2019-10-10 12:26 ` Hemant Agrawal
                   ` (2 more replies)
  0 siblings, 3 replies; 9+ messages in thread
From: Nipun Gupta @ 2019-10-04 11:11 UTC (permalink / raw)
  To: dev; +Cc: thomas, ferruh.yigit, hemant.agrawal, sachin.saxena, Nipun Gupta

IOVA_PHYS flag is not required in the DPAA config, thus disable it.
Also, disable the 1588 timer support by default on DPAA2 platform
due to the performance impact

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
---

This patch is rebase over dpdk-next-net

config/defconfig_arm64-dpaa-linuxapp-gcc  | 2 ++
 config/defconfig_arm64-dpaa2-linuxapp-gcc | 4 ++--
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/config/defconfig_arm64-dpaa-linuxapp-gcc b/config/defconfig_arm64-dpaa-linuxapp-gcc
index b408d4f48..c5599b4fa 100644
--- a/config/defconfig_arm64-dpaa-linuxapp-gcc
+++ b/config/defconfig_arm64-dpaa-linuxapp-gcc
@@ -24,3 +24,5 @@ CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n
 
 # NXP CAAM_JR driver
 CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE=y
+
+CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=n
diff --git a/config/defconfig_arm64-dpaa2-linuxapp-gcc b/config/defconfig_arm64-dpaa2-linuxapp-gcc
index 5c7eddd5e..b2ccbec0c 100644
--- a/config/defconfig_arm64-dpaa2-linuxapp-gcc
+++ b/config/defconfig_arm64-dpaa2-linuxapp-gcc
@@ -15,8 +15,8 @@ CONFIG_RTE_CACHE_LINE_SIZE=64
 
 CONFIG_RTE_PKTMBUF_HEADROOM=128
 
-# Enable IEEE1588, Keep it disable by default
-CONFIG_RTE_LIBRTE_IEEE1588=y
+# Disable IEEE1588 by default
+CONFIG_RTE_LIBRTE_IEEE1588=n
 
 # Doesn't support NUMA
 CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
-- 
2.17.1


^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [dpdk-dev] [PATCH] config: disable iova phys for dpaa and 1588 for dpaa2
  2019-10-04 11:11 [dpdk-dev] [PATCH] config: disable iova phys for dpaa and 1588 for dpaa2 Nipun Gupta
@ 2019-10-10 12:26 ` Hemant Agrawal
  2019-10-27 11:03 ` David Marchand
  2019-10-31 12:48 ` [dpdk-dev] [PATCH v2] config: disable 1588 timer support on DPAA2 Nipun Gupta
  2 siblings, 0 replies; 9+ messages in thread
From: Hemant Agrawal @ 2019-10-10 12:26 UTC (permalink / raw)
  To: Nipun Gupta, dpdk-dev

Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [dpdk-dev] [PATCH] config: disable iova phys for dpaa and 1588 for dpaa2
  2019-10-04 11:11 [dpdk-dev] [PATCH] config: disable iova phys for dpaa and 1588 for dpaa2 Nipun Gupta
  2019-10-10 12:26 ` Hemant Agrawal
@ 2019-10-27 11:03 ` David Marchand
  2019-10-30  9:36   ` Nipun Gupta
  2019-10-31 12:48 ` [dpdk-dev] [PATCH v2] config: disable 1588 timer support on DPAA2 Nipun Gupta
  2 siblings, 1 reply; 9+ messages in thread
From: David Marchand @ 2019-10-27 11:03 UTC (permalink / raw)
  To: Nipun Gupta
  Cc: dev, Yigit, Ferruh, Hemant Agrawal, Sachin Saxena, Thomas Monjalon

On Fri, Oct 4, 2019 at 1:26 PM Nipun Gupta <nipun.gupta@nxp.com> wrote:
>
> IOVA_PHYS flag is not required in the DPAA config, thus disable it.
> Also, disable the 1588 timer support by default on DPAA2 platform
> due to the performance impact

With this patch, we don't have a single target using the 1588 timer support.
This means that it will get broken in the future.

Is this used?

>
> Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>

With this patch, the meson configuration is unaligned with the make
configuration.

If I look before the patch:

origin/master:config/meson.build:dpdk_conf.set('RTE_LIBRTE_DPAA2_USE_PHYS_IOVA',
true)
origin/master:config/arm/meson.build:
['RTE_LIBRTE_DPAA2_USE_PHYS_IOVA', false]]

origin/master:config/common_base:CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
origin/master:config/defconfig_arm64-dpaa2-linuxapp-gcc:CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=n

And in the history, I understand:
- option (with dpaa2 in the name) introduced and enabled for all
- later, disabled for dpaa2

Does it mean the option can be removed?


-- 
David Marchand


^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [dpdk-dev] [PATCH] config: disable iova phys for dpaa and 1588 for dpaa2
  2019-10-27 11:03 ` David Marchand
@ 2019-10-30  9:36   ` Nipun Gupta
  2019-10-30 10:14     ` David Marchand
  0 siblings, 1 reply; 9+ messages in thread
From: Nipun Gupta @ 2019-10-30  9:36 UTC (permalink / raw)
  To: David Marchand
  Cc: dev, Yigit, Ferruh, Hemant Agrawal, Sachin Saxena, Thomas Monjalon

Hi David,

> -----Original Message-----
> From: David Marchand <david.marchand@redhat.com>
> Sent: Sunday, October 27, 2019 4:33 PM
> To: Nipun Gupta <nipun.gupta@nxp.com>
> Cc: dev <dev@dpdk.org>; Yigit, Ferruh <ferruh.yigit@intel.com>; Hemant
> Agrawal <hemant.agrawal@nxp.com>; Sachin Saxena
> <sachin.saxena@nxp.com>; Thomas Monjalon <thomas@monjalon.net>
> Subject: Re: [dpdk-dev] [PATCH] config: disable iova phys for dpaa and 1588
> for dpaa2
> 
> On Fri, Oct 4, 2019 at 1:26 PM Nipun Gupta <nipun.gupta@nxp.com> wrote:
> >
> > IOVA_PHYS flag is not required in the DPAA config, thus disable it.
> > Also, disable the 1588 timer support by default on DPAA2 platform
> > due to the performance impact
> 
> With this patch, we don't have a single target using the 1588 timer support.
> This means that it will get broken in the future.
> 
> Is this used?

Yes, this is enabled when PTP client application is used. We have by default disabled it 
because it has performance implications. We enable it in our system testing from time to 
time basis.

> 
> >
> > Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
> 
> With this patch, the meson configuration is unaligned with the make
> configuration.

I am not sure if I get this. In meson build as you mentioned:
- config/meson.build:dpdk_conf.set('RTE_LIBRTE_DPAA2_USE_PHYS_IOVA', true)
- config/arm/meson.build: ['RTE_LIBRTE_DPAA2_USE_PHYS_IOVA', false]]

And in Makefile:
config/common_base: CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
config/defconfig_arm64-dpaa2-linuxapp-gcc:CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=n

And now we have:
config/defconfig_arm64-dpaa-linuxapp-gcc:CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=n

Can you please let me know if I need to make any change for meson build.

> 
> If I look before the patch:
> 
> origin/master:config/meson.build:dpdk_conf.set('RTE_LIBRTE_DPAA2_USE_
> PHYS_IOVA',
> true)
> origin/master:config/arm/meson.build:
> ['RTE_LIBRTE_DPAA2_USE_PHYS_IOVA', false]]
> 
> origin/master:config/common_base:CONFIG_RTE_LIBRTE_DPAA2_USE_PHY
> S_IOVA=y
> origin/master:config/defconfig_arm64-dpaa2-linuxapp-
> gcc:CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=n
> 
> And in the history, I understand:
> - option (with dpaa2 in the name) introduced and enabled for all
> - later, disabled for dpaa2
> 
> Does it mean the option can be removed?

Here again, we use this option when running DPDK in Virtual Machine (Direct Assignment). 
By default this option is disabled, but for VM scenarios we use this option extensively.

Thanks,
Nipun

> 
> 
> --
> David Marchand


^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [dpdk-dev] [PATCH] config: disable iova phys for dpaa and 1588 for dpaa2
  2019-10-30  9:36   ` Nipun Gupta
@ 2019-10-30 10:14     ` David Marchand
  2019-10-31  6:56       ` Nipun Gupta
  0 siblings, 1 reply; 9+ messages in thread
From: David Marchand @ 2019-10-30 10:14 UTC (permalink / raw)
  To: Nipun Gupta, Hemant Agrawal
  Cc: dev, Yigit, Ferruh, Sachin Saxena, Thomas Monjalon

On Wed, Oct 30, 2019 at 10:37 AM Nipun Gupta <nipun.gupta@nxp.com> wrote:
>
> Hi David,
>
> > -----Original Message-----
> > From: David Marchand <david.marchand@redhat.com>
> > Sent: Sunday, October 27, 2019 4:33 PM
> > To: Nipun Gupta <nipun.gupta@nxp.com>
> > Cc: dev <dev@dpdk.org>; Yigit, Ferruh <ferruh.yigit@intel.com>; Hemant
> > Agrawal <hemant.agrawal@nxp.com>; Sachin Saxena
> > <sachin.saxena@nxp.com>; Thomas Monjalon <thomas@monjalon.net>
> > Subject: Re: [dpdk-dev] [PATCH] config: disable iova phys for dpaa and 1588
> > for dpaa2
> >
> > On Fri, Oct 4, 2019 at 1:26 PM Nipun Gupta <nipun.gupta@nxp.com> wrote:
> > >
> > > IOVA_PHYS flag is not required in the DPAA config, thus disable it.
> > > Also, disable the 1588 timer support by default on DPAA2 platform
> > > due to the performance impact
> >
> > With this patch, we don't have a single target using the 1588 timer support.
> > This means that it will get broken in the future.
> >
> > Is this used?
>
> Yes, this is enabled when PTP client application is used. We have by default disabled it
> because it has performance implications. We enable it in our system testing from time to
> time basis.

Ok, but beware that, starting from now, we (maintainers) won't see
that the compilation gets broken with this feature enabled.
Hope you can catch issues quickly.


> > With this patch, the meson configuration is unaligned with the make
> > configuration.
>
> I am not sure if I get this. In meson build as you mentioned:
> - config/meson.build:dpdk_conf.set('RTE_LIBRTE_DPAA2_USE_PHYS_IOVA', true)
> - config/arm/meson.build: ['RTE_LIBRTE_DPAA2_USE_PHYS_IOVA', false]]
>
> And in Makefile:
> config/common_base: CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
> config/defconfig_arm64-dpaa2-linuxapp-gcc:CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=n
>
> And now we have:
> config/defconfig_arm64-dpaa-linuxapp-gcc:CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=n
>
> Can you please let me know if I need to make any change for meson build.

You updated the configuration for the dpaa machine in make.
config/arm/meson.build: ['RTE_LIBRTE_DPAA2_USE_PHYS_IOVA', false]]
only applies to dpaa2.
So in meson, the dpaa machine still has RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y

>
> >
> > If I look before the patch:
> >
> > origin/master:config/meson.build:dpdk_conf.set('RTE_LIBRTE_DPAA2_USE_
> > PHYS_IOVA',
> > true)
> > origin/master:config/arm/meson.build:
> > ['RTE_LIBRTE_DPAA2_USE_PHYS_IOVA', false]]
> >
> > origin/master:config/common_base:CONFIG_RTE_LIBRTE_DPAA2_USE_PHY
> > S_IOVA=y
> > origin/master:config/defconfig_arm64-dpaa2-linuxapp-
> > gcc:CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=n
> >
> > And in the history, I understand:
> > - option (with dpaa2 in the name) introduced and enabled for all
> > - later, disabled for dpaa2
> >
> > Does it mean the option can be removed?
>
> Here again, we use this option when running DPDK in Virtual Machine (Direct Assignment).
> By default this option is disabled, but for VM scenarios we use this option extensively.

I don't understand when or on which platform you want this enabled/disabled.


If this option is supposed to be disabled by default, then the value
in those files (below) should be changed to n/false.
config/common_base:CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
config/meson.build:dpdk_conf.set('RTE_LIBRTE_DPAA2_USE_PHYS_IOVA', true)
doc/guides/nics/dpaa2.rst:- ``CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA``
(default ``y``)

And then, we end up in the same situation than described above with no
configuration referencing this option enabled.

Please clarify.


--
David Marchand


^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [dpdk-dev] [PATCH] config: disable iova phys for dpaa and 1588 for dpaa2
  2019-10-30 10:14     ` David Marchand
@ 2019-10-31  6:56       ` Nipun Gupta
  0 siblings, 0 replies; 9+ messages in thread
From: Nipun Gupta @ 2019-10-31  6:56 UTC (permalink / raw)
  To: David Marchand, Hemant Agrawal
  Cc: dev, Yigit, Ferruh, Sachin Saxena, Thomas Monjalon

Hi David,

> >
> > > -----Original Message-----
> > > From: David Marchand <david.marchand@redhat.com>
> > > Subject: Re: [dpdk-dev] [PATCH] config: disable iova phys for dpaa and
> 1588
> > > for dpaa2
> > >
> > > On Fri, Oct 4, 2019 at 1:26 PM Nipun Gupta <nipun.gupta@nxp.com>
> wrote:
> > > >
> > > > IOVA_PHYS flag is not required in the DPAA config, thus disable it.
> > > > Also, disable the 1588 timer support by default on DPAA2 platform
> > > > due to the performance impact
> > >
> > > With this patch, we don't have a single target using the 1588 timer
> support.
> > > This means that it will get broken in the future.
> > >
> > > Is this used?
> >
> > Yes, this is enabled when PTP client application is used. We have by default
> disabled it
> > because it has performance implications. We enable it in our system testing
> from time to
> > time basis.
> 
> Ok, but beware that, starting from now, we (maintainers) won't see
> that the compilation gets broken with this feature enabled.
> Hope you can catch issues quickly.

Yes.. we will take care of it.

> 
> 
> > > With this patch, the meson configuration is unaligned with the make
> > > configuration.
> >
> > I am not sure if I get this. In meson build as you mentioned:
> > -
> config/meson.build:dpdk_conf.set('RTE_LIBRTE_DPAA2_USE_PHYS_IOVA',
> true)
> > - config/arm/meson.build: ['RTE_LIBRTE_DPAA2_USE_PHYS_IOVA', false]]
> >
> > And in Makefile:
> > config/common_base: CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
> > config/defconfig_arm64-dpaa2-linuxapp-
> gcc:CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=n
> >
> > And now we have:
> > config/defconfig_arm64-dpaa-linuxapp-
> gcc:CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=n
> >
> > Can you please let me know if I need to make any change for meson build.
> 
> You updated the configuration for the dpaa machine in make.
> config/arm/meson.build: ['RTE_LIBRTE_DPAA2_USE_PHYS_IOVA', false]]
> only applies to dpaa2.
> So in meson, the dpaa machine still has
> RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
> 
> >
> > >
> > > If I look before the patch:
> > >
> > >
> origin/master:config/meson.build:dpdk_conf.set('RTE_LIBRTE_DPAA2_USE_
> > > PHYS_IOVA',
> > > true)
> > > origin/master:config/arm/meson.build:
> > > ['RTE_LIBRTE_DPAA2_USE_PHYS_IOVA', false]]
> > >
> > >
> origin/master:config/common_base:CONFIG_RTE_LIBRTE_DPAA2_USE_PHY
> > > S_IOVA=y
> > > origin/master:config/defconfig_arm64-dpaa2-linuxapp-
> > > gcc:CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=n
> > >
> > > And in the history, I understand:
> > > - option (with dpaa2 in the name) introduced and enabled for all
> > > - later, disabled for dpaa2
> > >
> > > Does it mean the option can be removed?
> >
> > Here again, we use this option when running DPDK in Virtual Machine
> (Direct Assignment).
> > By default this option is disabled, but for VM scenarios we use this option
> extensively.
> 
> I don't understand when or on which platform you want this
> enabled/disabled.
> 
> 
> If this option is supposed to be disabled by default, then the value
> in those files (below) should be changed to n/false.
> config/common_base:CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
> config/meson.build:dpdk_conf.set('RTE_LIBRTE_DPAA2_USE_PHYS_IOVA',
> true)
> doc/guides/nics/dpaa2.rst:-
> ``CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA``
> (default ``y``)

Reflecting and analyzing your comments, yes, there are discrepancies.
I will send patch to clean it up.

Thanks,
Nipun

> 
> And then, we end up in the same situation than described above with no
> configuration referencing this option enabled.
> 
> Please clarify.
> 
> 
> --
> David Marchand


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [dpdk-dev] [PATCH v2] config: disable 1588 timer support on DPAA2
  2019-10-04 11:11 [dpdk-dev] [PATCH] config: disable iova phys for dpaa and 1588 for dpaa2 Nipun Gupta
  2019-10-10 12:26 ` Hemant Agrawal
  2019-10-27 11:03 ` David Marchand
@ 2019-10-31 12:48 ` Nipun Gupta
  2019-10-31 16:18   ` David Marchand
  2019-11-01  2:52   ` Hemant Agrawal
  2 siblings, 2 replies; 9+ messages in thread
From: Nipun Gupta @ 2019-10-31 12:48 UTC (permalink / raw)
  To: dev; +Cc: thomas, david.marchand, hemant.agrawal, sachin.saxena, Nipun Gupta

This patch disables the 1588 timer support by default on DPAA2
platform due to the performance impact.
By default it is disabled in the common/base, so remove the entry
from DPAA2.

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
---

Changes in v2:
 - Change only the 1588 timestamp option in DPAA2 and do not touch
   the CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA option.

 config/defconfig_arm64-dpaa2-linuxapp-gcc | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/config/defconfig_arm64-dpaa2-linuxapp-gcc b/config/defconfig_arm64-dpaa2-linuxapp-gcc
index 5c7eddd5e..b2ccbec0c 100644
--- a/config/defconfig_arm64-dpaa2-linuxapp-gcc
+++ b/config/defconfig_arm64-dpaa2-linuxapp-gcc
@@ -15,8 +15,8 @@ CONFIG_RTE_CACHE_LINE_SIZE=64
 
 CONFIG_RTE_PKTMBUF_HEADROOM=128
 
-# Enable IEEE1588, Keep it disable by default
-CONFIG_RTE_LIBRTE_IEEE1588=y
+# Disable IEEE1588 by default
+CONFIG_RTE_LIBRTE_IEEE1588=n
 
 # Doesn't support NUMA
 CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
-- 
2.17.1


^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [dpdk-dev] [PATCH v2] config: disable 1588 timer support on DPAA2
  2019-10-31 12:48 ` [dpdk-dev] [PATCH v2] config: disable 1588 timer support on DPAA2 Nipun Gupta
@ 2019-10-31 16:18   ` David Marchand
  2019-11-01  2:52   ` Hemant Agrawal
  1 sibling, 0 replies; 9+ messages in thread
From: David Marchand @ 2019-10-31 16:18 UTC (permalink / raw)
  To: Nipun Gupta; +Cc: dev, Thomas Monjalon, Hemant Agrawal, Sachin Saxena

On Thu, Oct 31, 2019 at 2:04 PM Nipun Gupta <nipun.gupta@nxp.com> wrote:
>
> This patch disables the 1588 timer support by default on DPAA2
> platform due to the performance impact.
> By default it is disabled in the common/base, so remove the entry

config/common_base

> from DPAA2.
>
> Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
> ---
>
> Changes in v2:
>  - Change only the 1588 timestamp option in DPAA2 and do not touch
>    the CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA option.
>
>  config/defconfig_arm64-dpaa2-linuxapp-gcc | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/config/defconfig_arm64-dpaa2-linuxapp-gcc b/config/defconfig_arm64-dpaa2-linuxapp-gcc
> index 5c7eddd5e..b2ccbec0c 100644
> --- a/config/defconfig_arm64-dpaa2-linuxapp-gcc
> +++ b/config/defconfig_arm64-dpaa2-linuxapp-gcc
> @@ -15,8 +15,8 @@ CONFIG_RTE_CACHE_LINE_SIZE=64
>
>  CONFIG_RTE_PKTMBUF_HEADROOM=128
>
> -# Enable IEEE1588, Keep it disable by default
> -CONFIG_RTE_LIBRTE_IEEE1588=y
> +# Disable IEEE1588 by default
> +CONFIG_RTE_LIBRTE_IEEE1588=n

Removed this block when applying, since, as the commitlog mentioned,
it is disabled by default.

>
>  # Doesn't support NUMA
>  CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
> --
> 2.17.1
>

Reviewed-by: David Marchand <david.marchand@redhat.com>

Applied, thanks.


--
David Marchand


^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [dpdk-dev] [PATCH v2] config: disable 1588 timer support on DPAA2
  2019-10-31 12:48 ` [dpdk-dev] [PATCH v2] config: disable 1588 timer support on DPAA2 Nipun Gupta
  2019-10-31 16:18   ` David Marchand
@ 2019-11-01  2:52   ` Hemant Agrawal
  1 sibling, 0 replies; 9+ messages in thread
From: Hemant Agrawal @ 2019-11-01  2:52 UTC (permalink / raw)
  To: Nipun Gupta, dev; +Cc: thomas, david.marchand, Sachin Saxena, Nipun Gupta

Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>

^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, other threads:[~2019-11-01  2:52 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-04 11:11 [dpdk-dev] [PATCH] config: disable iova phys for dpaa and 1588 for dpaa2 Nipun Gupta
2019-10-10 12:26 ` Hemant Agrawal
2019-10-27 11:03 ` David Marchand
2019-10-30  9:36   ` Nipun Gupta
2019-10-30 10:14     ` David Marchand
2019-10-31  6:56       ` Nipun Gupta
2019-10-31 12:48 ` [dpdk-dev] [PATCH v2] config: disable 1588 timer support on DPAA2 Nipun Gupta
2019-10-31 16:18   ` David Marchand
2019-11-01  2:52   ` Hemant Agrawal

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).