"bus/pci: optimize bus scan" broke axgbe on V1000/R1000. RV root complex pci device does not have any kernel driver assigned so it is removed from pci scan list which is used in "net/axgbe: add a HW quirk for register definitions" Get root complex device id directly from pci sysfs instead of pci scan list Signed-off-by: Chandubabu Namburu <chandu@amd.com> --- drivers/net/axgbe/axgbe_ethdev.c | 39 ++++++++++++++++---------------- 1 file changed, 20 insertions(+), 19 deletions(-) diff --git a/drivers/net/axgbe/axgbe_ethdev.c b/drivers/net/axgbe/axgbe_ethdev.c index 9cd056d04a..26babde354 100644 --- a/drivers/net/axgbe/axgbe_ethdev.c +++ b/drivers/net/axgbe/axgbe_ethdev.c @@ -10,6 +10,8 @@ #include "axgbe_regs.h" #include "rte_time.h" +#include "eal_filesystem.h" + static int eth_axgbe_dev_init(struct rte_eth_dev *eth_dev); static int axgbe_dev_configure(struct rte_eth_dev *dev); static int axgbe_dev_start(struct rte_eth_dev *dev); @@ -1923,28 +1925,27 @@ static void axgbe_default_config(struct axgbe_port *pdata) pdata->power_down = 0; } -static int -pci_device_cmp(const struct rte_device *dev, const void *_pci_id) +/* + * Return PCI root complex device id on success else 0 + */ +static uint16_t +get_pci_rc_devid(void) { - const struct rte_pci_device *pdev = RTE_DEV_TO_PCI_CONST(dev); - const struct rte_pci_id *pcid = _pci_id; + char pci_sysfs[PATH_MAX]; + const struct rte_pci_addr pci_rc_addr = {0, 0, 0, 0}; + unsigned long device_id; - if (pdev->id.vendor_id == AMD_PCI_VENDOR_ID && - pdev->id.device_id == pcid->device_id) - return 0; - return 1; -} + snprintf(pci_sysfs, sizeof(pci_sysfs), "%s/" PCI_PRI_FMT "/device", + rte_pci_get_sysfs_path(), pci_rc_addr.domain, + pci_rc_addr.bus, pci_rc_addr.devid, pci_rc_addr.function); -static bool -pci_search_device(int device_id) -{ - struct rte_bus *pci_bus; - struct rte_pci_id dev_id; + /* get device id */ + if (eal_parse_sysfs_value(pci_sysfs, &device_id) < 0) { + PMD_INIT_LOG(ERR, "Error in reading PCI sysfs\n"); + return 0; + } - dev_id.device_id = device_id; - pci_bus = rte_bus_find_by_name("pci"); - return (pci_bus != NULL) && - (pci_bus->find_device(NULL, pci_device_cmp, &dev_id) != NULL); + return (uint16_t)device_id; } /* @@ -1986,7 +1987,7 @@ eth_axgbe_dev_init(struct rte_eth_dev *eth_dev) /* * Use root complex device ID to differentiate RV AXGBE vs SNOWY AXGBE */ - if (pci_search_device(AMD_PCI_RV_ROOT_COMPLEX_ID)) { + if ((get_pci_rc_devid()) == AMD_PCI_RV_ROOT_COMPLEX_ID) { pdata->xpcs_window_def_reg = PCS_V2_RV_WINDOW_DEF; pdata->xpcs_window_sel_reg = PCS_V2_RV_WINDOW_SELECT; } else { -- 2.25.1
Hi Chandu, I have tested this in the following configurations and it works very well in all cases: * V1000 with Yocto v3.3.2 & Linux v5.10.47 * E3000 with Yocto v3.3.2 & Linux v5.10.47 * V1000 with Ubuntu Server v20.04.3 LTS * E3000 with Ubuntu Server v20.04.3 LTS I think this is a much better approach than scanning the whole PCI bus and comparing each and every device against the PCI Root Complex Device ID of the platform. This solution looks good to me! Acked by: Arsalan H. Awan <Arsalan_Awan@mentor.com> ________________________________________ From: Chandubabu Namburu <chandu@amd.com> Sent: Friday, November 26, 2021 3:24 PM To: dev@dpdk.org Cc: Selwin.Sebastian@amd.com; Awan, Arsalan; Chandubabu Namburu Subject: [PATCH v1] net/axgbe: use PCI root complex device to distinguish AMD hardware "bus/pci: optimize bus scan" broke axgbe on V1000/R1000. RV root complex pci device does not have any kernel driver assigned so it is removed from pci scan list which is used in "net/axgbe: add a HW quirk for register definitions" Get root complex device id directly from pci sysfs instead of pci scan list Signed-off-by: Chandubabu Namburu <chandu@amd.com> --- drivers/net/axgbe/axgbe_ethdev.c | 39 ++++++++++++++++---------------- 1 file changed, 20 insertions(+), 19 deletions(-) diff --git a/drivers/net/axgbe/axgbe_ethdev.c b/drivers/net/axgbe/axgbe_ethdev.c index 9cd056d04a..26babde354 100644 --- a/drivers/net/axgbe/axgbe_ethdev.c +++ b/drivers/net/axgbe/axgbe_ethdev.c @@ -10,6 +10,8 @@ #include "axgbe_regs.h" #include "rte_time.h" +#include "eal_filesystem.h" + static int eth_axgbe_dev_init(struct rte_eth_dev *eth_dev); static int axgbe_dev_configure(struct rte_eth_dev *dev); static int axgbe_dev_start(struct rte_eth_dev *dev); @@ -1923,28 +1925,27 @@ static void axgbe_default_config(struct axgbe_port *pdata) pdata->power_down = 0; } -static int -pci_device_cmp(const struct rte_device *dev, const void *_pci_id) +/* + * Return PCI root complex device id on success else 0 + */ +static uint16_t +get_pci_rc_devid(void) { - const struct rte_pci_device *pdev = RTE_DEV_TO_PCI_CONST(dev); - const struct rte_pci_id *pcid = _pci_id; + char pci_sysfs[PATH_MAX]; + const struct rte_pci_addr pci_rc_addr = {0, 0, 0, 0}; + unsigned long device_id; - if (pdev->id.vendor_id == AMD_PCI_VENDOR_ID && - pdev->id.device_id == pcid->device_id) - return 0; - return 1; -} + snprintf(pci_sysfs, sizeof(pci_sysfs), "%s/" PCI_PRI_FMT "/device", + rte_pci_get_sysfs_path(), pci_rc_addr.domain, + pci_rc_addr.bus, pci_rc_addr.devid, pci_rc_addr.function); -static bool -pci_search_device(int device_id) -{ - struct rte_bus *pci_bus; - struct rte_pci_id dev_id; + /* get device id */ + if (eal_parse_sysfs_value(pci_sysfs, &device_id) < 0) { + PMD_INIT_LOG(ERR, "Error in reading PCI sysfs\n"); + return 0; + } - dev_id.device_id = device_id; - pci_bus = rte_bus_find_by_name("pci"); - return (pci_bus != NULL) && - (pci_bus->find_device(NULL, pci_device_cmp, &dev_id) != NULL); + return (uint16_t)device_id; } /* @@ -1986,7 +1987,7 @@ eth_axgbe_dev_init(struct rte_eth_dev *eth_dev) /* * Use root complex device ID to differentiate RV AXGBE vs SNOWY AXGBE */ - if (pci_search_device(AMD_PCI_RV_ROOT_COMPLEX_ID)) { + if ((get_pci_rc_devid()) == AMD_PCI_RV_ROOT_COMPLEX_ID) { pdata->xpcs_window_def_reg = PCS_V2_RV_WINDOW_DEF; pdata->xpcs_window_sel_reg = PCS_V2_RV_WINDOW_SELECT; } else { -- 2.25.1
On Fri, Nov 26, 2021 at 11:24 AM Chandubabu Namburu <chandu@amd.com> wrote: > > "bus/pci: optimize bus scan" broke axgbe on V1000/R1000. > RV root complex pci device does not have any kernel driver assigned > so it is removed from pci scan list which is used in > "net/axgbe: add a HW quirk for register definitions" > > Get root complex device id directly from pci sysfs instead of > pci scan list Please end the sentences with a '.'. As you described, this change is a fix. Please add a Fixes: tag and Cc: stable@dpdk.org in the commitlog if you think it should be backported to LTS releases. https://doc.dpdk.org/guides/contributing/patches.html#patch-for-stable-releases > > Signed-off-by: Chandubabu Namburu <chandu@amd.com> > --- > drivers/net/axgbe/axgbe_ethdev.c | 39 ++++++++++++++++---------------- > 1 file changed, 20 insertions(+), 19 deletions(-) > > diff --git a/drivers/net/axgbe/axgbe_ethdev.c b/drivers/net/axgbe/axgbe_ethdev.c > index 9cd056d04a..26babde354 100644 > --- a/drivers/net/axgbe/axgbe_ethdev.c > +++ b/drivers/net/axgbe/axgbe_ethdev.c > @@ -10,6 +10,8 @@ > #include "axgbe_regs.h" > #include "rte_time.h" > > +#include "eal_filesystem.h" > + > static int eth_axgbe_dev_init(struct rte_eth_dev *eth_dev); > static int axgbe_dev_configure(struct rte_eth_dev *dev); > static int axgbe_dev_start(struct rte_eth_dev *dev); > @@ -1923,28 +1925,27 @@ static void axgbe_default_config(struct axgbe_port *pdata) > pdata->power_down = 0; > } > > -static int > -pci_device_cmp(const struct rte_device *dev, const void *_pci_id) > +/* > + * Return PCI root complex device id on success else 0 > + */ > +static uint16_t > +get_pci_rc_devid(void) > { > - const struct rte_pci_device *pdev = RTE_DEV_TO_PCI_CONST(dev); > - const struct rte_pci_id *pcid = _pci_id; > + char pci_sysfs[PATH_MAX]; > + const struct rte_pci_addr pci_rc_addr = {0, 0, 0, 0}; > + unsigned long device_id; > > - if (pdev->id.vendor_id == AMD_PCI_VENDOR_ID && > - pdev->id.device_id == pcid->device_id) > - return 0; > - return 1; > -} > + snprintf(pci_sysfs, sizeof(pci_sysfs), "%s/" PCI_PRI_FMT "/device", > + rte_pci_get_sysfs_path(), pci_rc_addr.domain, > + pci_rc_addr.bus, pci_rc_addr.devid, pci_rc_addr.function); The use of rte_pci_get_sysfs_path() and in general is ugly because it only works for Linux. We could come up with a better API in the pci bus, but I don't think it is worth it atm. We can live with your implementation since this driver is only compiled on Linux. -- David Marchand
[Public] Hi David Marchand, Thank you for your comments. Will change patch and submit v2 for review Regards, Chandu -----Original Message----- From: David Marchand <david.marchand@redhat.com> Sent: Wednesday, December 1, 2021 2:31 PM To: Namburu, Chandu-babu <chandu@amd.com> Cc: dev <dev@dpdk.org>; Sebastian, Selwin <Selwin.Sebastian@amd.com>; Arsalan_Awan@mentor.com; Yigit, Ferruh <ferruh.yigit@intel.com> Subject: Re: [PATCH v1] net/axgbe: use PCI root complex device to distinguish AMD hardware On Fri, Nov 26, 2021 at 11:24 AM Chandubabu Namburu <chandu@amd.com> wrote: > > "bus/pci: optimize bus scan" broke axgbe on V1000/R1000. > RV root complex pci device does not have any kernel driver assigned so > it is removed from pci scan list which is used in > "net/axgbe: add a HW quirk for register definitions" > > Get root complex device id directly from pci sysfs instead of pci scan > list Please end the sentences with a '.'. As you described, this change is a fix. Please add a Fixes: tag and Cc: stable@dpdk.org in the commitlog if you think it should be backported to LTS releases. https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdoc.dpdk.org%2Fguides%2Fcontributing%2Fpatches.html%23patch-for-stable-releases&data=04%7C01%7Cchandu%40amd.com%7C6618c303ecb146be0b5908d9b4a91c01%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637739460691977618%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=piC1U%2BPcPP2A0xwM3%2FA5qDUFXNLAj2SrLBywTFc3DFM%3D&reserved=0 > > Signed-off-by: Chandubabu Namburu <chandu@amd.com> > --- > drivers/net/axgbe/axgbe_ethdev.c | 39 > ++++++++++++++++---------------- > 1 file changed, 20 insertions(+), 19 deletions(-) > > diff --git a/drivers/net/axgbe/axgbe_ethdev.c > b/drivers/net/axgbe/axgbe_ethdev.c > index 9cd056d04a..26babde354 100644 > --- a/drivers/net/axgbe/axgbe_ethdev.c > +++ b/drivers/net/axgbe/axgbe_ethdev.c > @@ -10,6 +10,8 @@ > #include "axgbe_regs.h" > #include "rte_time.h" > > +#include "eal_filesystem.h" > + > static int eth_axgbe_dev_init(struct rte_eth_dev *eth_dev); static > int axgbe_dev_configure(struct rte_eth_dev *dev); static int > axgbe_dev_start(struct rte_eth_dev *dev); @@ -1923,28 +1925,27 @@ > static void axgbe_default_config(struct axgbe_port *pdata) > pdata->power_down = 0; > } > > -static int > -pci_device_cmp(const struct rte_device *dev, const void *_pci_id) > +/* > + * Return PCI root complex device id on success else 0 */ static > +uint16_t > +get_pci_rc_devid(void) > { > - const struct rte_pci_device *pdev = RTE_DEV_TO_PCI_CONST(dev); > - const struct rte_pci_id *pcid = _pci_id; > + char pci_sysfs[PATH_MAX]; > + const struct rte_pci_addr pci_rc_addr = {0, 0, 0, 0}; > + unsigned long device_id; > > - if (pdev->id.vendor_id == AMD_PCI_VENDOR_ID && > - pdev->id.device_id == pcid->device_id) > - return 0; > - return 1; > -} > + snprintf(pci_sysfs, sizeof(pci_sysfs), "%s/" PCI_PRI_FMT "/device", > + rte_pci_get_sysfs_path(), pci_rc_addr.domain, > + pci_rc_addr.bus, pci_rc_addr.devid, > + pci_rc_addr.function); The use of rte_pci_get_sysfs_path() and in general is ugly because it only works for Linux. We could come up with a better API in the pci bus, but I don't think it is worth it atm. We can live with your implementation since this driver is only compiled on Linux. -- David Marchand
"bus/pci: optimize bus scan" broke axgbe on V1000/R1000. RV root complex pci device does not have any kernel driver assigned so it is removed from pci scan list which is used in "net/axgbe: add a HW quirk for register definitions". Get root complex device id directly from pci sysfs instead of pci scan list. Fixes: 991e0b1dbc4a (net/axgbe: add a HW quirk for register definitions) Cc: stable@dpdk.org Signed-off-by: Chandubabu Namburu <chandu@amd.com> --- drivers/net/axgbe/axgbe_ethdev.c | 39 ++++++++++++++++---------------- 1 file changed, 20 insertions(+), 19 deletions(-) diff --git a/drivers/net/axgbe/axgbe_ethdev.c b/drivers/net/axgbe/axgbe_ethdev.c index 7d40c18a86..7b8d94ca3c 100644 --- a/drivers/net/axgbe/axgbe_ethdev.c +++ b/drivers/net/axgbe/axgbe_ethdev.c @@ -10,6 +10,8 @@ #include "axgbe_regs.h" #include "rte_time.h" +#include "eal_filesystem.h" + static int eth_axgbe_dev_init(struct rte_eth_dev *eth_dev); static int axgbe_dev_configure(struct rte_eth_dev *dev); static int axgbe_dev_start(struct rte_eth_dev *dev); @@ -2117,28 +2119,27 @@ static void axgbe_default_config(struct axgbe_port *pdata) pdata->power_down = 0; } -static int -pci_device_cmp(const struct rte_device *dev, const void *_pci_id) +/* + * Return PCI root complex device id on success else 0 + */ +static uint16_t +get_pci_rc_devid(void) { - const struct rte_pci_device *pdev = RTE_DEV_TO_PCI_CONST(dev); - const struct rte_pci_id *pcid = _pci_id; + char pci_sysfs[PATH_MAX]; + const struct rte_pci_addr pci_rc_addr = {0, 0, 0, 0}; + unsigned long device_id; - if (pdev->id.vendor_id == AMD_PCI_VENDOR_ID && - pdev->id.device_id == pcid->device_id) - return 0; - return 1; -} + snprintf(pci_sysfs, sizeof(pci_sysfs), "%s/" PCI_PRI_FMT "/device", + rte_pci_get_sysfs_path(), pci_rc_addr.domain, + pci_rc_addr.bus, pci_rc_addr.devid, pci_rc_addr.function); -static bool -pci_search_device(int device_id) -{ - struct rte_bus *pci_bus; - struct rte_pci_id dev_id; + /* get device id */ + if (eal_parse_sysfs_value(pci_sysfs, &device_id) < 0) { + PMD_INIT_LOG(ERR, "Error in reading PCI sysfs\n"); + return 0; + } - dev_id.device_id = device_id; - pci_bus = rte_bus_find_by_name("pci"); - return (pci_bus != NULL) && - (pci_bus->find_device(NULL, pci_device_cmp, &dev_id) != NULL); + return (uint16_t)device_id; } /* @@ -2180,7 +2181,7 @@ eth_axgbe_dev_init(struct rte_eth_dev *eth_dev) /* * Use root complex device ID to differentiate RV AXGBE vs SNOWY AXGBE */ - if (pci_search_device(AMD_PCI_RV_ROOT_COMPLEX_ID)) { + if ((get_pci_rc_devid()) == AMD_PCI_RV_ROOT_COMPLEX_ID) { pdata->xpcs_window_def_reg = PCS_V2_RV_WINDOW_DEF; pdata->xpcs_window_sel_reg = PCS_V2_RV_WINDOW_SELECT; } else { -- 2.25.1
[Public] Hi David Marchand, I have submitted v2 patch with your suggestion in git log. Please review changes. Regards, Chandu -----Original Message----- From: Namburu, Chandu-babu <chandu@amd.com> Sent: Thursday, December 2, 2021 9:41 PM To: dev@dpdk.org; david.marchand@redhat.com Cc: Sebastian, Selwin <Selwin.Sebastian@amd.com>; Arsalan_Awan@mentor.com; ferruh.yigit@intel.com; Namburu, Chandu-babu <chandu@amd.com>; stable@dpdk.org Subject: [PATCH v2] net/axgbe: use PCI root complex device to distinguish AMD hardware "bus/pci: optimize bus scan" broke axgbe on V1000/R1000. RV root complex pci device does not have any kernel driver assigned so it is removed from pci scan list which is used in "net/axgbe: add a HW quirk for register definitions". Get root complex device id directly from pci sysfs instead of pci scan list. Fixes: 991e0b1dbc4a (net/axgbe: add a HW quirk for register definitions) Cc: stable@dpdk.org Signed-off-by: Chandubabu Namburu <chandu@amd.com> --- drivers/net/axgbe/axgbe_ethdev.c | 39 ++++++++++++++++---------------- 1 file changed, 20 insertions(+), 19 deletions(-) diff --git a/drivers/net/axgbe/axgbe_ethdev.c b/drivers/net/axgbe/axgbe_ethdev.c index 7d40c18a86..7b8d94ca3c 100644 --- a/drivers/net/axgbe/axgbe_ethdev.c +++ b/drivers/net/axgbe/axgbe_ethdev.c @@ -10,6 +10,8 @@ #include "axgbe_regs.h" #include "rte_time.h" +#include "eal_filesystem.h" + static int eth_axgbe_dev_init(struct rte_eth_dev *eth_dev); static int axgbe_dev_configure(struct rte_eth_dev *dev); static int axgbe_dev_start(struct rte_eth_dev *dev); @@ -2117,28 +2119,27 @@ static void axgbe_default_config(struct axgbe_port *pdata) pdata->power_down = 0; } -static int -pci_device_cmp(const struct rte_device *dev, const void *_pci_id) +/* + * Return PCI root complex device id on success else 0 */ static +uint16_t +get_pci_rc_devid(void) { - const struct rte_pci_device *pdev = RTE_DEV_TO_PCI_CONST(dev); - const struct rte_pci_id *pcid = _pci_id; + char pci_sysfs[PATH_MAX]; + const struct rte_pci_addr pci_rc_addr = {0, 0, 0, 0}; + unsigned long device_id; - if (pdev->id.vendor_id == AMD_PCI_VENDOR_ID && - pdev->id.device_id == pcid->device_id) - return 0; - return 1; -} + snprintf(pci_sysfs, sizeof(pci_sysfs), "%s/" PCI_PRI_FMT "/device", + rte_pci_get_sysfs_path(), pci_rc_addr.domain, + pci_rc_addr.bus, pci_rc_addr.devid, pci_rc_addr.function); -static bool -pci_search_device(int device_id) -{ - struct rte_bus *pci_bus; - struct rte_pci_id dev_id; + /* get device id */ + if (eal_parse_sysfs_value(pci_sysfs, &device_id) < 0) { + PMD_INIT_LOG(ERR, "Error in reading PCI sysfs\n"); + return 0; + } - dev_id.device_id = device_id; - pci_bus = rte_bus_find_by_name("pci"); - return (pci_bus != NULL) && - (pci_bus->find_device(NULL, pci_device_cmp, &dev_id) != NULL); + return (uint16_t)device_id; } /* @@ -2180,7 +2181,7 @@ eth_axgbe_dev_init(struct rte_eth_dev *eth_dev) /* * Use root complex device ID to differentiate RV AXGBE vs SNOWY AXGBE */ - if (pci_search_device(AMD_PCI_RV_ROOT_COMPLEX_ID)) { + if ((get_pci_rc_devid()) == AMD_PCI_RV_ROOT_COMPLEX_ID) { pdata->xpcs_window_def_reg = PCS_V2_RV_WINDOW_DEF; pdata->xpcs_window_sel_reg = PCS_V2_RV_WINDOW_SELECT; } else { -- 2.25.1
[Public] Hi, Gentle reminder. This is patch is required to submit changes for new AMD products. Please review and let us know if any modification are required. Regards, Chandu -----Original Message----- From: Namburu, Chandu-babu Sent: Wednesday, December 22, 2021 2:58 PM To: dev@dpdk.org; david.marchand@redhat.com; ferruh.yigit@intel.com Cc: Sebastian, Selwin <Selwin.Sebastian@amd.com>; Arsalan_Awan@mentor.com; stable@dpdk.org Subject: RE: [PATCH v2] net/axgbe: use PCI root complex device to distinguish AMD hardware [Public] Hi David Marchand, I have submitted v2 patch with your suggestion in git log. Please review changes. Regards, Chandu -----Original Message----- From: Namburu, Chandu-babu <chandu@amd.com> Sent: Thursday, December 2, 2021 9:41 PM To: dev@dpdk.org; david.marchand@redhat.com Cc: Sebastian, Selwin <Selwin.Sebastian@amd.com>; Arsalan_Awan@mentor.com; ferruh.yigit@intel.com; Namburu, Chandu-babu <chandu@amd.com>; stable@dpdk.org Subject: [PATCH v2] net/axgbe: use PCI root complex device to distinguish AMD hardware "bus/pci: optimize bus scan" broke axgbe on V1000/R1000. RV root complex pci device does not have any kernel driver assigned so it is removed from pci scan list which is used in "net/axgbe: add a HW quirk for register definitions". Get root complex device id directly from pci sysfs instead of pci scan list. Fixes: 991e0b1dbc4a (net/axgbe: add a HW quirk for register definitions) Cc: stable@dpdk.org Signed-off-by: Chandubabu Namburu <chandu@amd.com> --- drivers/net/axgbe/axgbe_ethdev.c | 39 ++++++++++++++++---------------- 1 file changed, 20 insertions(+), 19 deletions(-) diff --git a/drivers/net/axgbe/axgbe_ethdev.c b/drivers/net/axgbe/axgbe_ethdev.c index 7d40c18a86..7b8d94ca3c 100644 --- a/drivers/net/axgbe/axgbe_ethdev.c +++ b/drivers/net/axgbe/axgbe_ethdev.c @@ -10,6 +10,8 @@ #include "axgbe_regs.h" #include "rte_time.h" +#include "eal_filesystem.h" + static int eth_axgbe_dev_init(struct rte_eth_dev *eth_dev); static int axgbe_dev_configure(struct rte_eth_dev *dev); static int axgbe_dev_start(struct rte_eth_dev *dev); @@ -2117,28 +2119,27 @@ static void axgbe_default_config(struct axgbe_port *pdata) pdata->power_down = 0; } -static int -pci_device_cmp(const struct rte_device *dev, const void *_pci_id) +/* + * Return PCI root complex device id on success else 0 */ static +uint16_t +get_pci_rc_devid(void) { - const struct rte_pci_device *pdev = RTE_DEV_TO_PCI_CONST(dev); - const struct rte_pci_id *pcid = _pci_id; + char pci_sysfs[PATH_MAX]; + const struct rte_pci_addr pci_rc_addr = {0, 0, 0, 0}; + unsigned long device_id; - if (pdev->id.vendor_id == AMD_PCI_VENDOR_ID && - pdev->id.device_id == pcid->device_id) - return 0; - return 1; -} + snprintf(pci_sysfs, sizeof(pci_sysfs), "%s/" PCI_PRI_FMT "/device", + rte_pci_get_sysfs_path(), pci_rc_addr.domain, + pci_rc_addr.bus, pci_rc_addr.devid, pci_rc_addr.function); -static bool -pci_search_device(int device_id) -{ - struct rte_bus *pci_bus; - struct rte_pci_id dev_id; + /* get device id */ + if (eal_parse_sysfs_value(pci_sysfs, &device_id) < 0) { + PMD_INIT_LOG(ERR, "Error in reading PCI sysfs\n"); + return 0; + } - dev_id.device_id = device_id; - pci_bus = rte_bus_find_by_name("pci"); - return (pci_bus != NULL) && - (pci_bus->find_device(NULL, pci_device_cmp, &dev_id) != NULL); + return (uint16_t)device_id; } /* @@ -2180,7 +2181,7 @@ eth_axgbe_dev_init(struct rte_eth_dev *eth_dev) /* * Use root complex device ID to differentiate RV AXGBE vs SNOWY AXGBE */ - if (pci_search_device(AMD_PCI_RV_ROOT_COMPLEX_ID)) { + if ((get_pci_rc_devid()) == AMD_PCI_RV_ROOT_COMPLEX_ID) { pdata->xpcs_window_def_reg = PCS_V2_RV_WINDOW_DEF; pdata->xpcs_window_sel_reg = PCS_V2_RV_WINDOW_SELECT; } else { -- 2.25.1
Acked by: Selwin Sebastian <selwin.sebastian@amd.com> -----Original Message----- From: Namburu, Chandu-babu <chandu@amd.com> Sent: Monday, January 10, 2022 12:08 PM To: dev@dpdk.org; david.marchand@redhat.com; ferruh.yigit@intel.com Cc: Sebastian, Selwin <Selwin.Sebastian@amd.com>; Arsalan_Awan@mentor.com; stable@dpdk.org Subject: RE: [PATCH v2] net/axgbe: use PCI root complex device to distinguish AMD hardware [Public] Hi, Gentle reminder. This is patch is required to submit changes for new AMD products. Please review and let us know if any modification are required. Regards, Chandu -----Original Message----- From: Namburu, Chandu-babu Sent: Wednesday, December 22, 2021 2:58 PM To: dev@dpdk.org; david.marchand@redhat.com; ferruh.yigit@intel.com Cc: Sebastian, Selwin <Selwin.Sebastian@amd.com>; Arsalan_Awan@mentor.com; stable@dpdk.org Subject: RE: [PATCH v2] net/axgbe: use PCI root complex device to distinguish AMD hardware [Public] Hi David Marchand, I have submitted v2 patch with your suggestion in git log. Please review changes. Regards, Chandu -----Original Message----- From: Namburu, Chandu-babu <chandu@amd.com> Sent: Thursday, December 2, 2021 9:41 PM To: dev@dpdk.org; david.marchand@redhat.com Cc: Sebastian, Selwin <Selwin.Sebastian@amd.com>; Arsalan_Awan@mentor.com; ferruh.yigit@intel.com; Namburu, Chandu-babu <chandu@amd.com>; stable@dpdk.org Subject: [PATCH v2] net/axgbe: use PCI root complex device to distinguish AMD hardware "bus/pci: optimize bus scan" broke axgbe on V1000/R1000. RV root complex pci device does not have any kernel driver assigned so it is removed from pci scan list which is used in "net/axgbe: add a HW quirk for register definitions". Get root complex device id directly from pci sysfs instead of pci scan list. Fixes: 991e0b1dbc4a (net/axgbe: add a HW quirk for register definitions) Cc: stable@dpdk.org Signed-off-by: Chandubabu Namburu <chandu@amd.com> --- drivers/net/axgbe/axgbe_ethdev.c | 39 ++++++++++++++++---------------- 1 file changed, 20 insertions(+), 19 deletions(-) diff --git a/drivers/net/axgbe/axgbe_ethdev.c b/drivers/net/axgbe/axgbe_ethdev.c index 7d40c18a86..7b8d94ca3c 100644 --- a/drivers/net/axgbe/axgbe_ethdev.c +++ b/drivers/net/axgbe/axgbe_ethdev.c @@ -10,6 +10,8 @@ #include "axgbe_regs.h" #include "rte_time.h" +#include "eal_filesystem.h" + static int eth_axgbe_dev_init(struct rte_eth_dev *eth_dev); static int axgbe_dev_configure(struct rte_eth_dev *dev); static int axgbe_dev_start(struct rte_eth_dev *dev); @@ -2117,28 +2119,27 @@ static void axgbe_default_config(struct axgbe_port *pdata) pdata->power_down = 0; } -static int -pci_device_cmp(const struct rte_device *dev, const void *_pci_id) +/* + * Return PCI root complex device id on success else 0 */ static +uint16_t +get_pci_rc_devid(void) { - const struct rte_pci_device *pdev = RTE_DEV_TO_PCI_CONST(dev); - const struct rte_pci_id *pcid = _pci_id; + char pci_sysfs[PATH_MAX]; + const struct rte_pci_addr pci_rc_addr = {0, 0, 0, 0}; + unsigned long device_id; - if (pdev->id.vendor_id == AMD_PCI_VENDOR_ID && - pdev->id.device_id == pcid->device_id) - return 0; - return 1; -} + snprintf(pci_sysfs, sizeof(pci_sysfs), "%s/" PCI_PRI_FMT "/device", + rte_pci_get_sysfs_path(), pci_rc_addr.domain, + pci_rc_addr.bus, pci_rc_addr.devid, pci_rc_addr.function); -static bool -pci_search_device(int device_id) -{ - struct rte_bus *pci_bus; - struct rte_pci_id dev_id; + /* get device id */ + if (eal_parse_sysfs_value(pci_sysfs, &device_id) < 0) { + PMD_INIT_LOG(ERR, "Error in reading PCI sysfs\n"); + return 0; + } - dev_id.device_id = device_id; - pci_bus = rte_bus_find_by_name("pci"); - return (pci_bus != NULL) && - (pci_bus->find_device(NULL, pci_device_cmp, &dev_id) != NULL); + return (uint16_t)device_id; } /* @@ -2180,7 +2181,7 @@ eth_axgbe_dev_init(struct rte_eth_dev *eth_dev) /* * Use root complex device ID to differentiate RV AXGBE vs SNOWY AXGBE */ - if (pci_search_device(AMD_PCI_RV_ROOT_COMPLEX_ID)) { + if ((get_pci_rc_devid()) == AMD_PCI_RV_ROOT_COMPLEX_ID) { pdata->xpcs_window_def_reg = PCS_V2_RV_WINDOW_DEF; pdata->xpcs_window_sel_reg = PCS_V2_RV_WINDOW_SELECT; } else { -- 2.25.1
On 1/17/2022 5:40 AM, Sebastian, Selwin wrote: > Acked by: Selwin Sebastian <selwin.sebastian@amd.com> > Hi Selwin, Patchwork doesn't recognize the tag, I guess because it is looking for exact "Acked-by: " tag, with '-'. Can you please pay attention next time, able to see the status in the patchwork help maintainers to trace patch's status. Cheers, ferruh > -----Original Message----- > From: Namburu, Chandu-babu <chandu@amd.com> > Sent: Monday, January 10, 2022 12:08 PM > To: dev@dpdk.org; david.marchand@redhat.com; ferruh.yigit@intel.com > Cc: Sebastian, Selwin <Selwin.Sebastian@amd.com>; Arsalan_Awan@mentor.com; stable@dpdk.org > Subject: RE: [PATCH v2] net/axgbe: use PCI root complex device to distinguish AMD hardware > > [Public] > > Hi, > > Gentle reminder. > > This is patch is required to submit changes for new AMD products. Please review and let us know if any modification are required. > > Regards, > Chandu > > -----Original Message----- > From: Namburu, Chandu-babu > Sent: Wednesday, December 22, 2021 2:58 PM > To: dev@dpdk.org; david.marchand@redhat.com; ferruh.yigit@intel.com > Cc: Sebastian, Selwin <Selwin.Sebastian@amd.com>; Arsalan_Awan@mentor.com; stable@dpdk.org > Subject: RE: [PATCH v2] net/axgbe: use PCI root complex device to distinguish AMD hardware > > [Public] > > Hi David Marchand, > > I have submitted v2 patch with your suggestion in git log. Please review changes. > > Regards, > Chandu > > -----Original Message----- > From: Namburu, Chandu-babu <chandu@amd.com> > Sent: Thursday, December 2, 2021 9:41 PM > To: dev@dpdk.org; david.marchand@redhat.com > Cc: Sebastian, Selwin <Selwin.Sebastian@amd.com>; Arsalan_Awan@mentor.com; ferruh.yigit@intel.com; Namburu, Chandu-babu <chandu@amd.com>; stable@dpdk.org > Subject: [PATCH v2] net/axgbe: use PCI root complex device to distinguish AMD hardware > > "bus/pci: optimize bus scan" broke axgbe on V1000/R1000. > RV root complex pci device does not have any kernel driver assigned so it is removed from pci scan list which is used in > "net/axgbe: add a HW quirk for register definitions". > > Get root complex device id directly from pci sysfs instead of pci scan list. > > Fixes: 991e0b1dbc4a (net/axgbe: add a HW quirk for register definitions) > Cc: stable@dpdk.org > > Signed-off-by: Chandubabu Namburu <chandu@amd.com> > --- > drivers/net/axgbe/axgbe_ethdev.c | 39 ++++++++++++++++---------------- > 1 file changed, 20 insertions(+), 19 deletions(-) > > diff --git a/drivers/net/axgbe/axgbe_ethdev.c b/drivers/net/axgbe/axgbe_ethdev.c > index 7d40c18a86..7b8d94ca3c 100644 > --- a/drivers/net/axgbe/axgbe_ethdev.c > +++ b/drivers/net/axgbe/axgbe_ethdev.c > @@ -10,6 +10,8 @@ > #include "axgbe_regs.h" > #include "rte_time.h" > > +#include "eal_filesystem.h" > + > static int eth_axgbe_dev_init(struct rte_eth_dev *eth_dev); static int axgbe_dev_configure(struct rte_eth_dev *dev); static int axgbe_dev_start(struct rte_eth_dev *dev); @@ -2117,28 +2119,27 @@ static void axgbe_default_config(struct axgbe_port *pdata) > pdata->power_down = 0; > } > > -static int > -pci_device_cmp(const struct rte_device *dev, const void *_pci_id) > +/* > + * Return PCI root complex device id on success else 0 */ static > +uint16_t > +get_pci_rc_devid(void) > { > - const struct rte_pci_device *pdev = RTE_DEV_TO_PCI_CONST(dev); > - const struct rte_pci_id *pcid = _pci_id; > + char pci_sysfs[PATH_MAX]; > + const struct rte_pci_addr pci_rc_addr = {0, 0, 0, 0}; > + unsigned long device_id; > > - if (pdev->id.vendor_id == AMD_PCI_VENDOR_ID && > - pdev->id.device_id == pcid->device_id) > - return 0; > - return 1; > -} > + snprintf(pci_sysfs, sizeof(pci_sysfs), "%s/" PCI_PRI_FMT "/device", > + rte_pci_get_sysfs_path(), pci_rc_addr.domain, > + pci_rc_addr.bus, pci_rc_addr.devid, pci_rc_addr.function); > > -static bool > -pci_search_device(int device_id) > -{ > - struct rte_bus *pci_bus; > - struct rte_pci_id dev_id; > + /* get device id */ > + if (eal_parse_sysfs_value(pci_sysfs, &device_id) < 0) { > + PMD_INIT_LOG(ERR, "Error in reading PCI sysfs\n"); > + return 0; > + } > > - dev_id.device_id = device_id; > - pci_bus = rte_bus_find_by_name("pci"); > - return (pci_bus != NULL) && > - (pci_bus->find_device(NULL, pci_device_cmp, &dev_id) != NULL); > + return (uint16_t)device_id; > } > > /* > @@ -2180,7 +2181,7 @@ eth_axgbe_dev_init(struct rte_eth_dev *eth_dev) > /* > * Use root complex device ID to differentiate RV AXGBE vs SNOWY AXGBE > */ > - if (pci_search_device(AMD_PCI_RV_ROOT_COMPLEX_ID)) { > + if ((get_pci_rc_devid()) == AMD_PCI_RV_ROOT_COMPLEX_ID) { > pdata->xpcs_window_def_reg = PCS_V2_RV_WINDOW_DEF; > pdata->xpcs_window_sel_reg = PCS_V2_RV_WINDOW_SELECT; > } else { > -- > 2.25.1
Acked-by: Selwin Sebastian <selwin.sebastian@amd.com> -----Original Message----- From: Namburu, Chandu-babu <chandu@amd.com> Sent: Monday, January 10, 2022 12:08 PM To: dev@dpdk.org; david.marchand@redhat.com; ferruh.yigit@intel.com Cc: Sebastian, Selwin <Selwin.Sebastian@amd.com>; Arsalan_Awan@mentor.com; stable@dpdk.org Subject: RE: [PATCH v2] net/axgbe: use PCI root complex device to distinguish AMD hardware [Public] Hi, Gentle reminder. This is patch is required to submit changes for new AMD products. Please review and let us know if any modification are required. Regards, Chandu -----Original Message----- From: Namburu, Chandu-babu Sent: Wednesday, December 22, 2021 2:58 PM To: dev@dpdk.org; david.marchand@redhat.com; ferruh.yigit@intel.com Cc: Sebastian, Selwin <Selwin.Sebastian@amd.com>; Arsalan_Awan@mentor.com; stable@dpdk.org Subject: RE: [PATCH v2] net/axgbe: use PCI root complex device to distinguish AMD hardware [Public] Hi David Marchand, I have submitted v2 patch with your suggestion in git log. Please review changes. Regards, Chandu -----Original Message----- From: Namburu, Chandu-babu <chandu@amd.com> Sent: Thursday, December 2, 2021 9:41 PM To: dev@dpdk.org; david.marchand@redhat.com Cc: Sebastian, Selwin <Selwin.Sebastian@amd.com>; Arsalan_Awan@mentor.com; ferruh.yigit@intel.com; Namburu, Chandu-babu <chandu@amd.com>; stable@dpdk.org Subject: [PATCH v2] net/axgbe: use PCI root complex device to distinguish AMD hardware "bus/pci: optimize bus scan" broke axgbe on V1000/R1000. RV root complex pci device does not have any kernel driver assigned so it is removed from pci scan list which is used in "net/axgbe: add a HW quirk for register definitions". Get root complex device id directly from pci sysfs instead of pci scan list. Fixes: 991e0b1dbc4a (net/axgbe: add a HW quirk for register definitions) Cc: stable@dpdk.org Signed-off-by: Chandubabu Namburu <chandu@amd.com> --- drivers/net/axgbe/axgbe_ethdev.c | 39 ++++++++++++++++---------------- 1 file changed, 20 insertions(+), 19 deletions(-) diff --git a/drivers/net/axgbe/axgbe_ethdev.c b/drivers/net/axgbe/axgbe_ethdev.c index 7d40c18a86..7b8d94ca3c 100644 --- a/drivers/net/axgbe/axgbe_ethdev.c +++ b/drivers/net/axgbe/axgbe_ethdev.c @@ -10,6 +10,8 @@ #include "axgbe_regs.h" #include "rte_time.h" +#include "eal_filesystem.h" + static int eth_axgbe_dev_init(struct rte_eth_dev *eth_dev); static int axgbe_dev_configure(struct rte_eth_dev *dev); static int axgbe_dev_start(struct rte_eth_dev *dev); @@ -2117,28 +2119,27 @@ static void axgbe_default_config(struct axgbe_port *pdata) pdata->power_down = 0; } -static int -pci_device_cmp(const struct rte_device *dev, const void *_pci_id) +/* + * Return PCI root complex device id on success else 0 */ static +uint16_t +get_pci_rc_devid(void) { - const struct rte_pci_device *pdev = RTE_DEV_TO_PCI_CONST(dev); - const struct rte_pci_id *pcid = _pci_id; + char pci_sysfs[PATH_MAX]; + const struct rte_pci_addr pci_rc_addr = {0, 0, 0, 0}; + unsigned long device_id; - if (pdev->id.vendor_id == AMD_PCI_VENDOR_ID && - pdev->id.device_id == pcid->device_id) - return 0; - return 1; -} + snprintf(pci_sysfs, sizeof(pci_sysfs), "%s/" PCI_PRI_FMT "/device", + rte_pci_get_sysfs_path(), pci_rc_addr.domain, + pci_rc_addr.bus, pci_rc_addr.devid, pci_rc_addr.function); -static bool -pci_search_device(int device_id) -{ - struct rte_bus *pci_bus; - struct rte_pci_id dev_id; + /* get device id */ + if (eal_parse_sysfs_value(pci_sysfs, &device_id) < 0) { + PMD_INIT_LOG(ERR, "Error in reading PCI sysfs\n"); + return 0; + } - dev_id.device_id = device_id; - pci_bus = rte_bus_find_by_name("pci"); - return (pci_bus != NULL) && - (pci_bus->find_device(NULL, pci_device_cmp, &dev_id) != NULL); + return (uint16_t)device_id; } /* @@ -2180,7 +2181,7 @@ eth_axgbe_dev_init(struct rte_eth_dev *eth_dev) /* * Use root complex device ID to differentiate RV AXGBE vs SNOWY AXGBE */ - if (pci_search_device(AMD_PCI_RV_ROOT_COMPLEX_ID)) { + if ((get_pci_rc_devid()) == AMD_PCI_RV_ROOT_COMPLEX_ID) { pdata->xpcs_window_def_reg = PCS_V2_RV_WINDOW_DEF; pdata->xpcs_window_sel_reg = PCS_V2_RV_WINDOW_SELECT; } else { -- 2.25.1
[AMD Official Use Only] Hi Ferruh, I'm Sorry... corrected and sent it again. Thanks Selwin -----Original Message----- From: Ferruh Yigit <ferruh.yigit@intel.com> Sent: Monday, January 17, 2022 3:52 PM To: Sebastian, Selwin <Selwin.Sebastian@amd.com>; Namburu, Chandu-babu <chandu@amd.com>; dev@dpdk.org; david.marchand@redhat.com Cc: Arsalan_Awan@mentor.com; stable@dpdk.org Subject: Re: [PATCH v2] net/axgbe: use PCI root complex device to distinguish AMD hardware [CAUTION: External Email] On 1/17/2022 5:40 AM, Sebastian, Selwin wrote: > Acked by: Selwin Sebastian <selwin.sebastian@amd.com> > Hi Selwin, Patchwork doesn't recognize the tag, I guess because it is looking for exact "Acked-by: " tag, with '-'. Can you please pay attention next time, able to see the status in the patchwork help maintainers to trace patch's status. Cheers, ferruh > -----Original Message----- > From: Namburu, Chandu-babu <chandu@amd.com> > Sent: Monday, January 10, 2022 12:08 PM > To: dev@dpdk.org; david.marchand@redhat.com; ferruh.yigit@intel.com > Cc: Sebastian, Selwin <Selwin.Sebastian@amd.com>; > Arsalan_Awan@mentor.com; stable@dpdk.org > Subject: RE: [PATCH v2] net/axgbe: use PCI root complex device to > distinguish AMD hardware > > [Public] > > Hi, > > Gentle reminder. > > This is patch is required to submit changes for new AMD products. Please review and let us know if any modification are required. > > Regards, > Chandu > > -----Original Message----- > From: Namburu, Chandu-babu > Sent: Wednesday, December 22, 2021 2:58 PM > To: dev@dpdk.org; david.marchand@redhat.com; ferruh.yigit@intel.com > Cc: Sebastian, Selwin <Selwin.Sebastian@amd.com>; > Arsalan_Awan@mentor.com; stable@dpdk.org > Subject: RE: [PATCH v2] net/axgbe: use PCI root complex device to > distinguish AMD hardware > > [Public] > > Hi David Marchand, > > I have submitted v2 patch with your suggestion in git log. Please review changes. > > Regards, > Chandu > > -----Original Message----- > From: Namburu, Chandu-babu <chandu@amd.com> > Sent: Thursday, December 2, 2021 9:41 PM > To: dev@dpdk.org; david.marchand@redhat.com > Cc: Sebastian, Selwin <Selwin.Sebastian@amd.com>; > Arsalan_Awan@mentor.com; ferruh.yigit@intel.com; Namburu, Chandu-babu > <chandu@amd.com>; stable@dpdk.org > Subject: [PATCH v2] net/axgbe: use PCI root complex device to > distinguish AMD hardware > > "bus/pci: optimize bus scan" broke axgbe on V1000/R1000. > RV root complex pci device does not have any kernel driver assigned so > it is removed from pci scan list which is used in > "net/axgbe: add a HW quirk for register definitions". > > Get root complex device id directly from pci sysfs instead of pci scan list. > > Fixes: 991e0b1dbc4a (net/axgbe: add a HW quirk for register > definitions) > Cc: stable@dpdk.org > > Signed-off-by: Chandubabu Namburu <chandu@amd.com> > --- > drivers/net/axgbe/axgbe_ethdev.c | 39 ++++++++++++++++---------------- > 1 file changed, 20 insertions(+), 19 deletions(-) > > diff --git a/drivers/net/axgbe/axgbe_ethdev.c > b/drivers/net/axgbe/axgbe_ethdev.c > index 7d40c18a86..7b8d94ca3c 100644 > --- a/drivers/net/axgbe/axgbe_ethdev.c > +++ b/drivers/net/axgbe/axgbe_ethdev.c > @@ -10,6 +10,8 @@ > #include "axgbe_regs.h" > #include "rte_time.h" > > +#include "eal_filesystem.h" > + > static int eth_axgbe_dev_init(struct rte_eth_dev *eth_dev); static int axgbe_dev_configure(struct rte_eth_dev *dev); static int axgbe_dev_start(struct rte_eth_dev *dev); @@ -2117,28 +2119,27 @@ static void axgbe_default_config(struct axgbe_port *pdata) > pdata->power_down = 0; > } > > -static int > -pci_device_cmp(const struct rte_device *dev, const void *_pci_id) > +/* > + * Return PCI root complex device id on success else 0 */ static > +uint16_t > +get_pci_rc_devid(void) > { > - const struct rte_pci_device *pdev = RTE_DEV_TO_PCI_CONST(dev); > - const struct rte_pci_id *pcid = _pci_id; > + char pci_sysfs[PATH_MAX]; > + const struct rte_pci_addr pci_rc_addr = {0, 0, 0, 0}; > + unsigned long device_id; > > - if (pdev->id.vendor_id == AMD_PCI_VENDOR_ID && > - pdev->id.device_id == pcid->device_id) > - return 0; > - return 1; > -} > + snprintf(pci_sysfs, sizeof(pci_sysfs), "%s/" PCI_PRI_FMT "/device", > + rte_pci_get_sysfs_path(), pci_rc_addr.domain, > + pci_rc_addr.bus, pci_rc_addr.devid, > + pci_rc_addr.function); > > -static bool > -pci_search_device(int device_id) > -{ > - struct rte_bus *pci_bus; > - struct rte_pci_id dev_id; > + /* get device id */ > + if (eal_parse_sysfs_value(pci_sysfs, &device_id) < 0) { > + PMD_INIT_LOG(ERR, "Error in reading PCI sysfs\n"); > + return 0; > + } > > - dev_id.device_id = device_id; > - pci_bus = rte_bus_find_by_name("pci"); > - return (pci_bus != NULL) && > - (pci_bus->find_device(NULL, pci_device_cmp, &dev_id) != NULL); > + return (uint16_t)device_id; > } > > /* > @@ -2180,7 +2181,7 @@ eth_axgbe_dev_init(struct rte_eth_dev *eth_dev) > /* > * Use root complex device ID to differentiate RV AXGBE vs SNOWY AXGBE > */ > - if (pci_search_device(AMD_PCI_RV_ROOT_COMPLEX_ID)) { > + if ((get_pci_rc_devid()) == AMD_PCI_RV_ROOT_COMPLEX_ID) { > pdata->xpcs_window_def_reg = PCS_V2_RV_WINDOW_DEF; > pdata->xpcs_window_sel_reg = PCS_V2_RV_WINDOW_SELECT; > } else { > -- > 2.25.1
On 1/17/2022 10:29 AM, Sebastian, Selwin wrote:
<...>
> -----Original Message-----
> From: Namburu, Chandu-babu <chandu@amd.com>
> Sent: Thursday, December 2, 2021 9:41 PM
> To: dev@dpdk.org; david.marchand@redhat.com
> Cc: Sebastian, Selwin <Selwin.Sebastian@amd.com>; Arsalan_Awan@mentor.com; ferruh.yigit@intel.com; Namburu, Chandu-babu <chandu@amd.com>; stable@dpdk.org
> Subject: [PATCH v2] net/axgbe: use PCI root complex device to distinguish AMD hardware
>
> "bus/pci: optimize bus scan" broke axgbe on V1000/R1000.
> RV root complex pci device does not have any kernel driver assigned so it is removed from pci scan list which is used in
> "net/axgbe: add a HW quirk for register definitions".
>
> Get root complex device id directly from pci sysfs instead of pci scan list.
>
> Fixes: 991e0b1dbc4a (net/axgbe: add a HW quirk for register definitions)
> Cc: stable@dpdk.org
>
> Signed-off-by: Chandubabu Namburu <chandu@amd.com>
>
> Acked-by: Selwin Sebastian <selwin.sebastian@amd.com>
>
Applied to dpdk-next-net/main, thanks.