On Tue, May 27, 2025 at 11:37 AM Dean Marx wrote: > Modify dts.rst to exclude redundant/outdated information about the project, > and add new information regarding setup and framework design. > > Signed-off-by: Dean Marx > --- > doc/guides/tools/dts.rst | 310 +++++++++++++-------------------------- > 1 file changed, 99 insertions(+), 211 deletions(-) > > diff --git a/doc/guides/tools/dts.rst b/doc/guides/tools/dts.rst > index fcc6d22036..0aa6663b9f 100644 > --- a/doc/guides/tools/dts.rst > +++ b/doc/guides/tools/dts.rst > @@ -1,6 +1,7 @@ > .. SPDX-License-Identifier: BSD-3-Clause > Copyright(c) 2022-2023 PANTHEON.tech s.r.o. > Copyright(c) 2024 Arm Limited > + Copyright(c) 2025 University of New Hampshire > > DPDK Test Suite > =============== > @@ -20,31 +21,18 @@ DTS runtime environment > > DTS runtime environment node > A node where at least one DTS runtime environment is present. > - This is the node where we run DTS and from which DTS connects to other > nodes. > Leave this in. > > System under test > - An SUT is the combination of DPDK and the hardware we're testing > - in conjunction with DPDK (NICs, crypto and other devices). > + Node with DPDK and relevant hardware (NICs, crypto, etc.). > Maybe change to "The system which runs a DPDK application on relevant hardware (NIC, accelerator cards, etc) and from which the DPDK behavior is observed for tests." > > System under test node > A node where at least one SUT is present. > > Traffic generator > - A TG is either software or hardware capable of sending packets. > + Node that sends traffic; can be hardware or software-based. > "Node that sends traffic to the SUT;" Sorry for being so particular. :) > Traffic generator node > A node where at least one TG is present. > - In case of hardware traffic generators, the TG and the node are > literally the same. > - > - > -In most cases, interchangeably referring to a runtime environment, SUT, > TG or the node > -they're running on (e.g. using SUT and SUT node interchangeably) doesn't > cause confusion. > -There could theoretically be more than of these running on the same node > and in that case > -it's useful to have stricter definitions. > -An example would be two different traffic generators (such as Trex and > Scapy) > -running on the same node. > -A different example would be a node containing both a DTS runtime > environment > -and a traffic generator, in which case it's both a DTS runtime > environment node and a TG node. > > > DTS Environment > @@ -195,12 +183,28 @@ These need to be set up on a Traffic Generator Node: > Running DTS > ----------- > > -DTS needs to know which nodes to connect to and what hardware to use on > those nodes. > -Once that's configured, either a DPDK source code tarball or tree folder > -need to be supplied whether these are on your DTS host machine or the SUT > node. > -DTS can accept a pre-compiled build placed in a subdirectory, > -or it will compile DPDK on the SUT node, > -and then run the tests with the newly built binaries. > +To run DTS, use ``main.py`` with Poetry: > + > +.. code-block:: console > + > + ```shell > + docker build --target dev -t dpdk-dts . > + docker run -v $(pwd)/..:/dpdk -v /home/dtsuser/.ssh:/root/.ssh:ro -it > dpdk-dts bash > + $ poetry install > + $ poetry run ./main.py > + ``` > + > +Common options include: > + > +- ``--output-dir``: Custom output location. > +- ``--remote-source``: Use sources stored on the SUT. > +- ``--tarball``: Specify the tarball to be tested. > + > +For a full list: > + > +.. code-block:: console > + > + poetry run ./main.py --help > I think we should keep the full list of flags here instead of removing it for this subset. It's a bit of a maintenance burden and it make the file longer but it's important info. I think it's good to present it here even if it is only "a --help away." > > > Configuring DTS > @@ -220,71 +224,6 @@ The user must have :ref:`administrator privileges > ` > which don't require password authentication. > > > -DTS Execution > -~~~~~~~~~~~~~ > - > -DTS is run with ``main.py`` located in the ``dts`` directory after > entering Poetry shell: > - > -.. code-block:: console > - > - (dts-py3.10) $ ./main.py --help > - usage: main.py [-h] [--test-run-config-file FILE_PATH] > [--nodes-config-file FILE_PATH] [--tests-config-file FILE_PATH] > - [--output-dir DIR_PATH] [-t SECONDS] [-v] [--dpdk-tree > DIR_PATH | --tarball FILE_PATH] [--remote-source] > - [--precompiled-build-dir DIR_NAME] [--compile-timeout > SECONDS] [--test-suite TEST_SUITE [TEST_CASES ...]] > - [--re-run N_TIMES] [--random-seed NUMBER] > - > - Run DPDK test suites. All options may be specified with the > environment variables provided in brackets. Command line arguments have > higher > - priority. > - > - options: > - -h, --help show this help message and exit > - --test-run-config-file FILE_PATH > - [DTS_TEST_RUN_CFG_FILE] The configuration file > that describes the test cases and DPDK build options. (default: > test-run.conf.yaml) > - --nodes-config-file FILE_PATH > - [DTS_NODES_CFG_FILE] The configuration file > that describes the SUT and TG nodes. (default: nodes.conf.yaml) > - --tests-config-file FILE_PATH > - [DTS_TESTS_CFG_FILE] Configuration file used > to override variable values inside specific test suites. (default: None) > - --output-dir DIR_PATH, --output DIR_PATH > - [DTS_OUTPUT_DIR] Output directory where DTS > logs and results are saved. (default: output) > - -t SECONDS, --timeout SECONDS > - [DTS_TIMEOUT] The default timeout for all DTS > operations except for compiling DPDK. (default: 15) > - -v, --verbose [DTS_VERBOSE] Specify to enable verbose > output, logging all messages to the console. (default: False) > - --compile-timeout SECONDS > - [DTS_COMPILE_TIMEOUT] The timeout for > compiling DPDK. (default: 1200) > - --test-suite TEST_SUITE [TEST_CASES ...] > - [DTS_TEST_SUITES] A list containing a test > suite with test cases. The first parameter is the test suite name, and > - the rest are test case names, which are > optional. May be specified multiple times. To specify multiple test suites > - in the environment variable, join the lists > with a comma. Examples: --test-suite suite case case --test-suite > - suite case ... | DTS_TEST_SUITES='suite case > case, suite case, ...' | --test-suite suite --test-suite suite case > - ... | DTS_TEST_SUITES='suite, suite case, ...' > (default: []) > - --re-run N_TIMES, --re_run N_TIMES > - [DTS_RERUN] Re-run each test case the > specified number of times if a test failure occurs. (default: 0) > - --random-seed NUMBER [DTS_RANDOM_SEED] The seed to use with the > pseudo-random generator. If not specified, the configuration value is > - used instead. If that's also not specified, a > random seed is generated. (default: None) > - > - DPDK Build Options: > - Arguments in this group (and subgroup) will be applied to a > DPDKLocation when the DPDK tree, tarball or revision will be provided, > - other arguments like remote source and build dir are optional. A > DPDKLocation from settings are used instead of from config if > - construct successful. > - > - --dpdk-tree DIR_PATH [DTS_DPDK_TREE] The path to the DPDK source > tree directory to test. Cannot be used in conjunction with --tarball. > - (default: None) > - --tarball FILE_PATH, --snapshot FILE_PATH > - [DTS_DPDK_TARBALL] The path to the DPDK source > tarball to test. DPDK must be contained in a folder with the same > - name as the tarball file. Cannot be used in > conjunction with --dpdk-tree. (default: None) > - --remote-source [DTS_REMOTE_SOURCE] Set this option if either > the DPDK source tree or tarball to be used are located on the SUT > - node. Can only be used with --dpdk-tree or > --tarball. (default: False) > - --precompiled-build-dir DIR_NAME > - [DTS_PRECOMPILED_BUILD_DIR] Define the > subdirectory under the DPDK tree root directory or tarball where the pre- > - compiled binaries are located. (default: None) > - > - > -The brackets contain the names of environment variables that set the same > thing. > -The minimum DTS needs is a config file and a pre-built DPDK > -or DPDK sources location which can be specified in said config file > -or on the command line or environment variables. > - > - > DTS Results > ~~~~~~~~~~~ > > @@ -308,140 +247,89 @@ Adding test cases may require adding code to the > framework as well. > Framework Coding Guidelines > ~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > -When adding code to the DTS framework, pay attention to the rest of the > code > -and try not to divert much from it. > -The :ref:`DTS developer tools ` will issue warnings > -when some of the basics are not met. > -You should also build the :ref:`API documentation ` > -to address any issues found during the build. > - > -The API documentation, which is a helpful reference when developing, may > be accessed > -in the code directly or generated with the :ref:`API docs build steps > `. > -When adding new files or modifying the directory structure, > -the corresponding changes must be made to DTS API doc sources in > ``doc/api/dts``. > - > -Speaking of which, the code must be properly documented with docstrings. > -The style must conform to the `Google style > -< > https://google.github.io/styleguide/pyguide.html#38-comments-and-docstrings > >`_. > -See an example of the style `here > -< > https://www.sphinx-doc.org/en/master/usage/extensions/example_google.html > >`_. > -For cases which are not covered by the Google style, refer to `PEP 257 > -`_. > -There are some cases which are not covered by the two style guides, > -where we deviate or where some additional clarification is helpful: > - > - * The ``__init__()`` methods of classes are documented separately > - from the docstring of the class itself. > - * The docstrings of implemented abstract methods should refer to the > superclass's definition > - if there's no deviation. > - * Instance variables/attributes should be documented in the docstring > of the class > - in the ``Attributes:`` section. > - * The ``dataclass.dataclass`` decorator changes how the attributes are > processed. > - The dataclass attributes which result in instance > variables/attributes > - should also be recorded in the ``Attributes:`` section. > - * Class variables/attributes and Pydantic model fields, on the other > hand, > - should be documented with ``#:`` above the type annotated line. > - The description may be omitted if the meaning is obvious. > - * The ``Enum`` and ``TypedDict`` also process the attributes in > particular ways > - and should be documented with ``#:`` as well. > - This is mainly so that the autogenerated documentation contains the > assigned value. > - * When referencing a parameter of a function or a method in their > docstring, > - don't use any articles and put the parameter into single backticks. > - This mimics the style of `Python's documentation < > https://docs.python.org/3/index.html>`_. > - * When specifying a value, use double backticks:: > - > - def foo(greet: bool) -> None: > - """Demonstration of single and double backticks. > - > - `greet` controls whether ``Hello World`` is printed. > - > - Args: > - greet: Whether to print the ``Hello World`` message. > - """ > - if greet: > - print(f"Hello World") > - > - * The docstring maximum line length is the same as the code maximum > line length. > - > - > -How To Write a Test Suite > -------------------------- > - > -All test suites inherit from ``TestSuite`` defined in > ``dts/framework/test_suite.py``. > "All test suites are a class which inherits from" > -There are four types of methods that comprise a test suite: > - > -#. **Test cases** > - > - | Test cases are methods that start with a particular prefix. > - | Functional test cases start with ``test_``, e.g. > ``test_hello_world_single_core``. - | Performance test cases start with ``test_perf_``, e.g. > ``test_perf_nic_single_core``. > Now decorator based. > - | A test suite may have any number of functional and/or performance > test cases. > - However, these test cases must test the same feature, > - following the rule of one feature = one test suite. > - Test cases for one feature don't need to be grouped in just one test > suite, though. > - If the feature requires many testing scenarios to cover, > - the test cases would be better off spread over multiple test suites > - so that each test suite doesn't take too long to execute. > - > -#. **Setup and Teardown methods** > - > - | There are setup and teardown methods for the whole test suite and > each individual test case. > - | Methods ``set_up_suite`` and ``tear_down_suite`` will be executed > - before any and after all test cases have been executed, respectively. > - | Methods ``set_up_test_case`` and ``tear_down_test_case`` will be > executed > - before and after each test case, respectively. > - | These methods don't need to be implemented if there's no need for > them in a test suite. > - In that case, nothing will happen when they are executed. > - > -#. **Configuration, traffic and other logic** > - > - The ``TestSuite`` class contains a variety of methods for anything that > - a test suite setup, a teardown, or a test case may need to do. > - > - The test suites also frequently use a DPDK app, such as testpmd, in > interactive mode > - and use the interactive shell instances directly. > - > - These are the two main ways to call the framework logic in test suites. > - If there's any functionality or logic missing from the framework, > - it should be implemented so that the test suites can use one of these > two ways. > - > -#. **Test case verification** > - > - Test case verification should be done with the ``verify`` method, > which records the result. > - The method should be called at the end of each test case. > - > -#. **Other methods** > I see that some of the content under "Other methods" is now false and should be removed - thanks for doing so. However, I do think there was a lot of good within the original "Test Cases," "Setup and Teardown Methods," and "Configuration, traffic and other logic" which has been removed. For this one I prefer if we just sit down and hash it out in person when you're in next week. > - > - Of course, all test suite code should adhere to coding standards. > - Only the above methods will be treated specially and any other methods > may be defined > - (which should be mostly private methods needed by each particular test > suite). > - Any specific features (such as NIC configuration) required by a test > suite > - should be implemented in the ``SutNode`` class (and the underlying > classes that ``SutNode`` uses) > - and used by the test suite via the ``sut_node`` field. > +When contributing code to the DTS framework, follow existing conventions > to ensure consistency. > +The :ref:`DTS developer tools ` will flag basic issues. > +Also, be sure to :ref:`build the API documentation ` > to catch any problems during the build. > > +The API documentation is a helpful reference during development. > +It can be viewed in the code directly or generated using the :ref:`API > docs build steps `. > +If you add new files or change the directory structure, update the > corresponding sources in ``doc/api/dts``. > > -.. _dts_dev_tools: > +Code must be documented with docstrings that follow the > +`Google style < > https://google.github.io/styleguide/pyguide.html#38-comments-and-docstrings > >`_. > +Additional references: > > -DTS Developer Tools > -------------------- > +* `Sphinx Google style example < > https://www.sphinx-doc.org/en/master/usage/extensions/example_google.html > >`_ > +* `PEP 257 `_ > + > +Docstring and Attribute Guidelines > > -There are two tools used in DTS to help with code checking, style and > formatting: > +* Document ``__init__()`` separately from the class docstring. > +* If an abstract method simply implements a superclass definition without > changes, refer to that superclass in the docstring. > +* Document instance variables in the class docstring under an > ``Attributes:`` section. > +* For ``@dataclass`` classes, document instance-level attributes in > ``Attributes:``, as they are generated from the class fields. > +* Document class variables and Pydantic fields using ``#:``, > + placed above the type-annotated line. Descriptions may be omitted if > the meaning is clear. > +* Apply ``#:`` to ``Enum`` and ``TypedDict`` fields as well, so that > autogenerated documentation includes their values. > +* When referring to a parameter in a docstring, omit articles and enclose > the parameter in single backticks (e.g., `` `param` ``), > + consistent with the `Python documentation style < > https://docs.python.org/3/index.html>`_. > +* Use double backticks (````value````) for literal values. > > -* `ruff `_ > +Example:: > > - An extremely fast all-in-one linting and formatting solution, > - which covers most if not all the major rules such as: > - pylama, flake8, pylint etc. > - Its built-in formatter is also Black-compatible > - and is able to sort imports automatically like isort would. > + def foo(greet: bool) -> None: > + """Demonstrates single vs. double backticks. > > -* `mypy `_ > + `greet` controls whether ``Hello World`` is printed. > > - Enables static typing for Python, exploiting the type hints in the > source code. > + Args: > + greet: Whether to print the ``Hello World`` message. > + """ > + if greet: > + print("Hello World") > + > +The maximum line length for docstrings must match that of the code. > + > + > +Creating a Test Suite > +--------------------- > + > +All test suites inherit from ``TestSuite`` in > ``dts/framework/test_suite.py``. A typical suite contains: > + > +- Test Cases > + - Functional: start with ``test_``, e.g., ``test_basic_link`` > + - Performance: start with ``test_perf_``, e.g., > ``test_perf_throughput`` I realize you go on to describe the decorators after this, but I think the test_func and test_perf naming convention is no longer required. Example: @requires(NicCapability.FLOW_CTRL) @func_test def flow_ctrl_port_configuration_persistence(self) -> None: """Flow control port configuration persistency test. Steps: For each port enable flow control for RX and TX individually. Verify: The configuration persists after the port is restarted. """ > + - Import the ``func_test`` and/or ``perf_test`` decorators from > ``TestSuite`` and add them above each test case method, > + e.g., ``@func_test`` followed by ``test_basic_link`` > + > +- Setup/Teardown Hooks > + - Suite-level: ``set_up_suite()``, ``tear_down_suite()`` > + - Case-level: ``set_up_test_case()``, ``tear_down_test_case()`` > + > +- Verification > + Use ``self.verify(condition, message)`` to record test results. > I think the important part of "verify" to explain to people is that you are setting the testcase assertion condition, not the recording aspect. > + > +- Support Methods > + Helper logic (e.g., traffic handling, config) should be in private > methods or delegated to ``sut_node``. > I realize this is just a rewording that crept in, but this is wrong for a couple reasons: 1. We no longer import node/sutnode when writing testsuites. Node is purely framework code now, and is not exposed to testsuites. 2. sut_node (and tg_node) no longer exists. > + > + > +.. _dts_dev_tools: > + > +Developer Tools > +--------------- > + > +- ruff > + - Linter and formatter (replaces flake8, pylint, isort, etc.) > + - Compatible with Black > + > +- mypy > + - Performs static type checking > + > +Run checks using: > + > +.. code-block:: console > > -These two tools are all used in ``devtools/dts-check-format.sh``, > -the DTS code check and format script. > -Refer to the script for usage: ``devtools/dts-check-format.sh -h``. > + devtools/dts-check-format.sh > > > .. _building_api_docs: > -- > 2.49.0 > > Lots of improvements overall - keep up the good work! A productive Summer ahead. Reviewed-by: Patrick Robb