Applied to next-dts, thanks.

On Tue, Oct 28, 2025 at 8:22 AM Andrew Bailey <abailey@iol.unh.edu> wrote:

> Currently, there is no way in the testpmd shell class to set the mbuf
> fast free offload configuration for queues or ports. This prohibits any
> test suites to be written utilizing this offload configuration.
> Introduce methods that support calls to testpmd in order to allow
> the configuration of mbuf fast free.
>
> Signed-off-by: Andrew Bailey <abailey@iol.unh.edu>
> ---
>  dts/api/testpmd/__init__.py | 60 +++++++++++++++++++++++++++++++++++++
>  1 file changed, 60 insertions(+)
>
> diff --git a/dts/api/testpmd/__init__.py b/dts/api/testpmd/__init__.py
> index a060ab5639..9e9cbaf495 100644
> --- a/dts/api/testpmd/__init__.py
> +++ b/dts/api/testpmd/__init__.py
> @@ -1292,3 +1292,63 @@ def get_capabilities_physical_function(
>              supported_capabilities.add(NicCapability.PHYSICAL_FUNCTION)
>          else:
>              unsupported_capabilities.add(NicCapability.PHYSICAL_FUNCTION)
> +
> +    @_requires_stopped_ports
> +    def set_port_mbuf_fast_free(
> +        self,
> +        port_id: int,
> +        on: bool,
> +        /,
> +        verify: bool = True,
> +    ) -> None:
> +        """Sets the mbuf_fast_free configuration for the Tx offload of a
> given port.
> +
> +        Args:
> +            port_id: The ID of the port to configure mbuf_fast_free on.
> +            on: If :data:`True` mbuf_fast_free will be enabled, disable
> it otherwise.
> +            verify: If :data:`True` the output of the command will be
> scanned in an attempt to
> +                verify that the mbuf_fast_free was set successfully.
> +
> +        Raises:
> +            InteractiveCommandExecutionError: If mbuf_fast_free could not
> be set successfully.
> +        """
> +        mbuf_output = self.send_command(
> +            f"port config {port_id} tx_offload mbuf_fast_free {"on" if on
> else "off"}"
> +        )
> +
> +        if verify and "Error" in mbuf_output:
> +            raise InteractiveCommandExecutionError(
> +                f"Unable to set mbuf_fast_free config on port
> {port_id}:\n{mbuf_output}"
> +            )
> +
> +    @_requires_stopped_ports
> +    def set_queue_mbuf_fast_free(
> +        self,
> +        port_id: int,
> +        on: bool,
> +        /,
> +        queue_id: int = 0,
> +        verify: bool = True,
> +    ) -> None:
> +        """Sets the Tx mbuf_fast_free configuration of the specified
> queue on a given port.
> +
> +        Args:
> +            port_id: The ID of the port containing the queues.
> +            on: If :data:`True` the mbuf_fast_free configuration will be
> enabled, otherwise
> +                disabled.
> +            queue_id: The ID of the queue to configure mbuf_fast_free on.
> +            verify: If :data:`True` the output of the command will be
> scanned in an attempt to
> +                verify that mbuf_fast_free was set successfully on all
> ports.
> +
> +        Raises:
> +            InteractiveCommandExecutionError: If all queues could not be
> set successfully.
> +        """
> +        toggle = "on" if on else "off"
> +        output = self.send_command(
> +            f"port {port_id} txq {queue_id} tx_offload mbuf_fast_free
> {toggle}"
> +        )
> +        if verify and "Error" in output:
> +            self._logger.debug(f"Set queue offload config
> error\n{output}")
> +            raise InteractiveCommandExecutionError(
> +                f"Failed to get offload config on port {port_id}, queue
> {queue_id}:\n{output}"
> +            )
> --
> 2.50.1
>
>