* [dpdk-dev] [PATCH] net/octeontx2: fix exit paths after cq init
@ 2019-11-11 13:21 Anoob Joseph
2019-11-15 7:32 ` Jerin Jacob
0 siblings, 1 reply; 2+ messages in thread
From: Anoob Joseph @ 2019-11-11 13:21 UTC (permalink / raw)
To: Jerin Jacob, Nithin Dabilpuram, Kiran Kumar K
Cc: Anoob Joseph, Ferruh Yigit, Andrew Rybchenko, Narayana Prasad, dev
After otx2_nix_register_cq_irqs() is called and the IRQs are setup,
otx2_nix_unregister_cq_irqs() need to be called in the subsequent error
exit paths.
Fixes: d34db5ccbf30 ("net/octeontx2: fix driver reconfiguration")
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
---
drivers/net/octeontx2/otx2_ethdev.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/octeontx2/otx2_ethdev.c b/drivers/net/octeontx2/otx2_ethdev.c
index aab34db..18aa0f5 100644
--- a/drivers/net/octeontx2/otx2_ethdev.c
+++ b/drivers/net/octeontx2/otx2_ethdev.c
@@ -1700,13 +1700,13 @@ otx2_nix_configure(struct rte_eth_dev *eth_dev)
rc = cgx_intlbk_enable(dev, eth_dev->data->dev_conf.lpbk_mode);
if (rc) {
otx2_err("Failed to configure cgx loop back mode rc=%d", rc);
- goto q_irq_fini;
+ goto cq_fini;
}
rc = otx2_nix_rxchan_bpid_cfg(eth_dev, true);
if (rc) {
otx2_err("Failed to configure nix rx chan bpid cfg rc=%d", rc);
- goto q_irq_fini;
+ goto cq_fini;
}
rc = otx2_nix_mc_addr_list_install(eth_dev);
--
2.7.4
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: [dpdk-dev] [PATCH] net/octeontx2: fix exit paths after cq init
2019-11-11 13:21 [dpdk-dev] [PATCH] net/octeontx2: fix exit paths after cq init Anoob Joseph
@ 2019-11-15 7:32 ` Jerin Jacob
0 siblings, 0 replies; 2+ messages in thread
From: Jerin Jacob @ 2019-11-15 7:32 UTC (permalink / raw)
To: Anoob Joseph
Cc: Jerin Jacob, Nithin Dabilpuram, Kiran Kumar K, Ferruh Yigit,
Andrew Rybchenko, Narayana Prasad, dpdk-dev
On Mon, Nov 11, 2019 at 6:51 PM Anoob Joseph <anoobj@marvell.com> wrote:
>
> After otx2_nix_register_cq_irqs() is called and the IRQs are setup,
> otx2_nix_unregister_cq_irqs() need to be called in the subsequent error
> exit paths.
>
> Fixes: d34db5ccbf30 ("net/octeontx2: fix driver reconfiguration")
>
> Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Applied to dpdk-next-net-mrvl/master. Thanks
> ---
> drivers/net/octeontx2/otx2_ethdev.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/octeontx2/otx2_ethdev.c b/drivers/net/octeontx2/otx2_ethdev.c
> index aab34db..18aa0f5 100644
> --- a/drivers/net/octeontx2/otx2_ethdev.c
> +++ b/drivers/net/octeontx2/otx2_ethdev.c
> @@ -1700,13 +1700,13 @@ otx2_nix_configure(struct rte_eth_dev *eth_dev)
> rc = cgx_intlbk_enable(dev, eth_dev->data->dev_conf.lpbk_mode);
> if (rc) {
> otx2_err("Failed to configure cgx loop back mode rc=%d", rc);
> - goto q_irq_fini;
> + goto cq_fini;
> }
>
> rc = otx2_nix_rxchan_bpid_cfg(eth_dev, true);
> if (rc) {
> otx2_err("Failed to configure nix rx chan bpid cfg rc=%d", rc);
> - goto q_irq_fini;
> + goto cq_fini;
> }
>
> rc = otx2_nix_mc_addr_list_install(eth_dev);
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-11-15 7:32 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-11 13:21 [dpdk-dev] [PATCH] net/octeontx2: fix exit paths after cq init Anoob Joseph
2019-11-15 7:32 ` Jerin Jacob
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).