From: Jerin Jacob <jerinjacobk@gmail.com>
To: Harman Kalra <hkalra@marvell.com>, Ferruh Yigit <ferruh.yigit@intel.com>
Cc: Jerin Jacob <jerinj@marvell.com>,
Maciej Czekaj <mczekaj@marvell.com>, dpdk-dev <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH] net/thunderx: add link up and down ops
Date: Thu, 27 Feb 2020 17:04:03 +0530 [thread overview]
Message-ID: <CALBAE1M7v5RepEr+uU8mD7Cb_a-mF-dvOBsMO2Qc1QWhEVodmA@mail.gmail.com> (raw)
In-Reply-To: <1580894793-6394-1-git-send-email-hkalra@marvell.com>
On Wed, Feb 5, 2020 at 2:57 PM Harman Kalra <hkalra@marvell.com> wrote:
>
> Add support for .set_link_up/down() eth ops to bring
> link up and down.
>
> Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Applied to dpdk-next-net-mrvl/master. Thanks
> ---
> drivers/net/thunderx/base/nicvf_mbox.c | 10 ++++++++
> drivers/net/thunderx/base/nicvf_mbox.h | 10 ++++++++
> drivers/net/thunderx/nicvf_ethdev.c | 33 ++++++++++++++++++++++++++
> 3 files changed, 53 insertions(+)
>
> diff --git a/drivers/net/thunderx/base/nicvf_mbox.c b/drivers/net/thunderx/base/nicvf_mbox.c
> index 8f83d41dd..5b3ab939d 100644
> --- a/drivers/net/thunderx/base/nicvf_mbox.c
> +++ b/drivers/net/thunderx/base/nicvf_mbox.c
> @@ -413,6 +413,16 @@ nicvf_mbox_reset_stat_counters(struct nicvf *nic, uint16_t rx_stat_mask,
> return nicvf_mbox_send_msg_to_pf(nic, &mbx);
> }
>
> +int
> +nicvf_mbox_set_link_up_down(struct nicvf *nic, bool enable)
> +{
> + struct nic_mbx mbx = { .msg = { 0 } };
> +
> + mbx.lbk.msg = NIC_MBOX_MSG_SET_LINK;
> + mbx.lbk.vf_id = nic->vf_id;
> + mbx.lbk.enable = enable;
> + return nicvf_mbox_send_msg_to_pf(nic, &mbx);
> +}
> void
> nicvf_mbox_shutdown(struct nicvf *nic)
> {
> diff --git a/drivers/net/thunderx/base/nicvf_mbox.h b/drivers/net/thunderx/base/nicvf_mbox.h
> index 81f1f4083..d0b294362 100644
> --- a/drivers/net/thunderx/base/nicvf_mbox.h
> +++ b/drivers/net/thunderx/base/nicvf_mbox.h
> @@ -40,6 +40,7 @@
> #define NIC_MBOX_MSG_ALLOC_SQS 0x12 /* Allocate secondary Qset */
> #define NIC_MBOX_MSG_LOOPBACK 0x16 /* Set interface in loopback */
> #define NIC_MBOX_MSG_RESET_STAT_COUNTER 0x17 /* Reset statistics counters */
> +#define NIC_MBOX_MSG_SET_LINK 0x21 /* Set link up/down */
> #define NIC_MBOX_MSG_CFG_DONE 0xF0 /* VF configuration done */
> #define NIC_MBOX_MSG_SHUTDOWN 0xF1 /* VF is being shutdown */
> #define NIC_MBOX_MSG_MAX 0x100 /* Maximum number of messages */
> @@ -169,6 +170,13 @@ struct reset_stat_cfg {
> uint16_t sq_stat_mask;
> };
>
> +/* Set link up/down */
> +struct set_link_state {
> + uint8_t msg;
> + uint8_t vf_id;
> + bool enable;
> +};
> +
> struct nic_mbx {
> /* 128 bit shared memory between PF and each VF */
> union {
> @@ -186,6 +194,7 @@ union {
> struct sqs_alloc sqs_alloc;
> struct set_loopback lbk;
> struct reset_stat_cfg reset_stat;
> + struct set_link_state set_link;
> };
> };
>
> @@ -210,6 +219,7 @@ int nicvf_mbox_rq_sync(struct nicvf *nic);
> int nicvf_mbox_loopback_config(struct nicvf *nic, bool enable);
> int nicvf_mbox_reset_stat_counters(struct nicvf *nic, uint16_t rx_stat_mask,
> uint8_t tx_stat_mask, uint16_t rq_stat_mask, uint16_t sq_stat_mask);
> +int nicvf_mbox_set_link_up_down(struct nicvf *nic, bool enable);
> void nicvf_mbox_shutdown(struct nicvf *nic);
> void nicvf_mbox_cfg_done(struct nicvf *nic);
>
> diff --git a/drivers/net/thunderx/nicvf_ethdev.c b/drivers/net/thunderx/nicvf_ethdev.c
> index 2cf0ffe13..6f43541a5 100644
> --- a/drivers/net/thunderx/nicvf_ethdev.c
> +++ b/drivers/net/thunderx/nicvf_ethdev.c
> @@ -1988,6 +1988,37 @@ nicvf_dev_configure(struct rte_eth_dev *dev)
> return 0;
> }
>
> +static int
> +nicvf_dev_set_link_up(struct rte_eth_dev *dev)
> +{
> + struct nicvf *nic = nicvf_pmd_priv(dev);
> + int rc, i;
> +
> + rc = nicvf_mbox_set_link_up_down(nic, true);
> + if (rc)
> + goto done;
> +
> + /* Start tx queues */
> + for (i = 0; i < dev->data->nb_tx_queues; i++)
> + nicvf_dev_tx_queue_start(dev, i);
> +
> +done:
> + return rc;
> +}
> +
> +static int
> +nicvf_dev_set_link_down(struct rte_eth_dev *dev)
> +{
> + struct nicvf *nic = nicvf_pmd_priv(dev);
> + int i;
> +
> + /* Stop tx queues */
> + for (i = 0; i < dev->data->nb_tx_queues; i++)
> + nicvf_dev_tx_queue_stop(dev, i);
> +
> + return nicvf_mbox_set_link_up_down(nic, false);
> +}
> +
> /* Initialize and register driver with DPDK Application */
> static const struct eth_dev_ops nicvf_eth_dev_ops = {
> .dev_configure = nicvf_dev_configure,
> @@ -2015,6 +2046,8 @@ static const struct eth_dev_ops nicvf_eth_dev_ops = {
> .rx_queue_count = nicvf_dev_rx_queue_count,
> .tx_queue_setup = nicvf_dev_tx_queue_setup,
> .tx_queue_release = nicvf_dev_tx_queue_release,
> + .dev_set_link_up = nicvf_dev_set_link_up,
> + .dev_set_link_down = nicvf_dev_set_link_down,
> .get_reg = nicvf_dev_get_regs,
> };
>
> --
> 2.18.0
>
prev parent reply other threads:[~2020-02-27 11:34 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-05 9:26 Harman Kalra
2020-02-27 11:34 ` Jerin Jacob [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CALBAE1M7v5RepEr+uU8mD7Cb_a-mF-dvOBsMO2Qc1QWhEVodmA@mail.gmail.com \
--to=jerinjacobk@gmail.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=hkalra@marvell.com \
--cc=jerinj@marvell.com \
--cc=mczekaj@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).