From: Jerin Jacob <jerinjacobk@gmail.com>
To: Pavan Nikhilesh <pbhagavatula@marvell.com>,
Ferruh Yigit <ferruh.yigit@intel.com>
Cc: Jerin Jacob <jerinj@marvell.com>,
Nithin Dabilpuram <ndabilpuram@marvell.com>,
Kiran Kumar K <kirankumark@marvell.com>,
John McNamara <john.mcnamara@intel.com>,
Marko Kovacevic <marko.kovacevic@intel.com>,
dpdk-dev <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v4] net/octeontx2: add set supported types op
Date: Fri, 15 Nov 2019 15:47:40 +0530 [thread overview]
Message-ID: <CALBAE1MAMLasAa+pxw3m4wSX0+aX5ME0Q_rNtuG-niMbiT+dVA@mail.gmail.com> (raw)
In-Reply-To: <20191107025254.4297-1-pbhagavatula@marvell.com>
On Thu, Nov 7, 2019 at 8:23 AM <pbhagavatula@marvell.com> wrote:
>
> From: Pavan Nikhilesh <pbhagavatula@marvell.com>
>
> Add support to set supported ptypes for octeontx2.
Added extra git commit log:
Add support to set supported ptypes for octeontx2 and
remove devarg scheme to disable ptype parsing support as
application can use rte_eth_dev_set_ptypes() normative API
to enable the same use case.
>
> Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Applied to dpdk-next-net-mrvl/master. Thanks
> ---
> v4 Changes:
> ----------
> - Rebase onto series
> http://patches.dpdk.org/project/dpdk/list/?series=7302.
>
> v3 Changes:
> ----------
> - Actually update doc file.
>
> v2 Changes:
> ----------
> - Update documentation.
> - Use positive logic.
>
> doc/guides/nics/octeontx2.rst | 5 -----
> drivers/net/octeontx2/otx2_ethdev.c | 1 +
> drivers/net/octeontx2/otx2_ethdev.h | 1 +
> drivers/net/octeontx2/otx2_ethdev_devargs.c | 21 ---------------------
> drivers/net/octeontx2/otx2_lookup.c | 15 +++++++++++++++
> 5 files changed, 17 insertions(+), 26 deletions(-)
>
> diff --git a/doc/guides/nics/octeontx2.rst b/doc/guides/nics/octeontx2.rst
> index eb7aaa468..026df44e6 100644
> --- a/doc/guides/nics/octeontx2.rst
> +++ b/doc/guides/nics/octeontx2.rst
> @@ -113,11 +113,6 @@ use arm64-octeontx2-linux-gcc as target.
> Runtime Config Options
> ----------------------
>
> -- ``HW offload ptype parsing disable`` (default ``0``)
> -
> - Packet type parsing is HW offloaded by default and this feature may be toggled
> - using ``ptype_disable`` ``devargs`` parameter.
> -
> - ``Rx&Tx scalar mode enable`` (default ``0``)
>
> Ethdev supports both scalar and vector mode, it may be selected at runtime
> diff --git a/drivers/net/octeontx2/otx2_ethdev.c b/drivers/net/octeontx2/otx2_ethdev.c
> index dfa8cd205..db18e4cb9 100644
> --- a/drivers/net/octeontx2/otx2_ethdev.c
> +++ b/drivers/net/octeontx2/otx2_ethdev.c
> @@ -1983,6 +1983,7 @@ static const struct eth_dev_ops otx2_eth_dev_ops = {
> .dev_set_link_up = otx2_nix_dev_set_link_up,
> .dev_set_link_down = otx2_nix_dev_set_link_down,
> .dev_supported_ptypes_get = otx2_nix_supported_ptypes_get,
> + .dev_ptypes_set = otx2_nix_ptypes_set,
> .dev_reset = otx2_nix_dev_reset,
> .stats_get = otx2_nix_dev_stats_get,
> .stats_reset = otx2_nix_dev_stats_reset,
> diff --git a/drivers/net/octeontx2/otx2_ethdev.h b/drivers/net/octeontx2/otx2_ethdev.h
> index 4d9ed4870..b65891a5b 100644
> --- a/drivers/net/octeontx2/otx2_ethdev.h
> +++ b/drivers/net/octeontx2/otx2_ethdev.h
> @@ -525,6 +525,7 @@ void *otx2_nix_fastpath_lookup_mem_get(void);
>
> /* PTYPES */
> const uint32_t *otx2_nix_supported_ptypes_get(struct rte_eth_dev *dev);
> +int otx2_nix_ptypes_set(struct rte_eth_dev *eth_dev, uint32_t ptype_mask);
>
> /* Mac address handling */
> int otx2_nix_mac_addr_set(struct rte_eth_dev *eth_dev,
> diff --git a/drivers/net/octeontx2/otx2_ethdev_devargs.c b/drivers/net/octeontx2/otx2_ethdev_devargs.c
> index ca9a5ffb8..04da1abbd 100644
> --- a/drivers/net/octeontx2/otx2_ethdev_devargs.c
> +++ b/drivers/net/octeontx2/otx2_ethdev_devargs.c
> @@ -63,21 +63,6 @@ parse_reta_size(const char *key, const char *value, void *extra_args)
> return 0;
> }
>
> -static int
> -parse_ptype_flag(const char *key, const char *value, void *extra_args)
> -{
> - RTE_SET_USED(key);
> - uint32_t val;
> -
> - val = atoi(value);
> - if (val)
> - val = 0; /* Disable NIX_RX_OFFLOAD_PTYPE_F */
> -
> - *(uint16_t *)extra_args = val;
> -
> - return 0;
> -}
> -
> static int
> parse_flag(const char *key, const char *value, void *extra_args)
> {
> @@ -119,7 +104,6 @@ parse_switch_header_type(const char *key, const char *value, void *extra_args)
> }
>
> #define OTX2_RSS_RETA_SIZE "reta_size"
> -#define OTX2_PTYPE_DISABLE "ptype_disable"
> #define OTX2_SCL_ENABLE "scalar_enable"
> #define OTX2_MAX_SQB_COUNT "max_sqb_count"
> #define OTX2_FLOW_PREALLOC_SIZE "flow_prealloc_size"
> @@ -129,7 +113,6 @@ parse_switch_header_type(const char *key, const char *value, void *extra_args)
> int
> otx2_ethdev_parse_devargs(struct rte_devargs *devargs, struct otx2_eth_dev *dev)
> {
> - uint16_t offload_flag = NIX_RX_OFFLOAD_PTYPE_F;
> uint16_t rss_size = NIX_RSS_RETA_SIZE;
> uint16_t sqb_count = NIX_MAX_SQB;
> uint16_t flow_prealloc_size = 8;
> @@ -145,8 +128,6 @@ otx2_ethdev_parse_devargs(struct rte_devargs *devargs, struct otx2_eth_dev *dev)
> if (kvlist == NULL)
> goto exit;
>
> - rte_kvargs_process(kvlist, OTX2_PTYPE_DISABLE,
> - &parse_ptype_flag, &offload_flag);
> rte_kvargs_process(kvlist, OTX2_RSS_RETA_SIZE,
> &parse_reta_size, &rss_size);
> rte_kvargs_process(kvlist, OTX2_SCL_ENABLE,
> @@ -162,7 +143,6 @@ otx2_ethdev_parse_devargs(struct rte_devargs *devargs, struct otx2_eth_dev *dev)
> rte_kvargs_free(kvlist);
>
> null_devargs:
> - dev->rx_offload_flags = offload_flag;
> dev->scalar_ena = scalar_enable;
> dev->max_sqb_count = sqb_count;
> dev->rss_info.rss_size = rss_size;
> @@ -177,7 +157,6 @@ otx2_ethdev_parse_devargs(struct rte_devargs *devargs, struct otx2_eth_dev *dev)
>
> RTE_PMD_REGISTER_PARAM_STRING(net_octeontx2,
> OTX2_RSS_RETA_SIZE "=<64|128|256>"
> - OTX2_PTYPE_DISABLE "=1"
> OTX2_SCL_ENABLE "=1"
> OTX2_MAX_SQB_COUNT "=<8-512>"
> OTX2_FLOW_PREALLOC_SIZE "=<1-32>"
> diff --git a/drivers/net/octeontx2/otx2_lookup.c b/drivers/net/octeontx2/otx2_lookup.c
> index 3071278fc..17c44e20e 100644
> --- a/drivers/net/octeontx2/otx2_lookup.c
> +++ b/drivers/net/octeontx2/otx2_lookup.c
> @@ -62,6 +62,21 @@ otx2_nix_supported_ptypes_get(struct rte_eth_dev *eth_dev)
> return NULL;
> }
>
> +int
> +otx2_nix_ptypes_set(struct rte_eth_dev *eth_dev, uint32_t ptype_mask)
> +{
> + struct otx2_eth_dev *dev = otx2_eth_pmd_priv(eth_dev);
> +
> + if (ptype_mask)
> + dev->rx_offload_flags |= NIX_RX_OFFLOAD_PTYPE_F;
> + else
> + dev->rx_offload_flags &= ~NIX_RX_OFFLOAD_PTYPE_F;
> +
> + otx2_eth_set_rx_function(eth_dev);
> +
> + return 0;
> +}
> +
> /*
> * +------------------ +------------------ +
> * | | IL4 | IL3| IL2 | TU | L4 | L3 | L2 |
> --
> 2.17.1
>
next prev parent reply other threads:[~2019-11-15 10:18 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-08 9:00 [dpdk-dev] [PATCH] " pbhagavatula
2019-10-11 8:02 ` Jerin Jacob
2019-10-17 12:20 ` [dpdk-dev] [PATCH v2] " pbhagavatula
2019-10-17 16:22 ` Jerin Jacob
2019-10-17 16:51 ` [dpdk-dev] [PATCH v3] " pbhagavatula
2019-11-07 2:52 ` [dpdk-dev] [PATCH v4] " pbhagavatula
2019-11-15 10:17 ` Jerin Jacob [this message]
2019-11-15 13:44 ` Ferruh Yigit
2019-11-15 14:02 ` [dpdk-dev] [EXT] " Pavan Nikhilesh Bhagavatula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CALBAE1MAMLasAa+pxw3m4wSX0+aX5ME0Q_rNtuG-niMbiT+dVA@mail.gmail.com \
--to=jerinjacobk@gmail.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=jerinj@marvell.com \
--cc=john.mcnamara@intel.com \
--cc=kirankumark@marvell.com \
--cc=marko.kovacevic@intel.com \
--cc=ndabilpuram@marvell.com \
--cc=pbhagavatula@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).