From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mails.dpdk.org (mails.dpdk.org [217.70.189.124]) by inbox.dpdk.org (Postfix) with ESMTP id EB123A0C4D; Thu, 15 Jul 2021 09:10:31 +0200 (CEST) Received: from [217.70.189.124] (localhost [127.0.0.1]) by mails.dpdk.org (Postfix) with ESMTP id 6D26B40143; Thu, 15 Jul 2021 09:10:31 +0200 (CEST) Received: from mail-il1-f169.google.com (mail-il1-f169.google.com [209.85.166.169]) by mails.dpdk.org (Postfix) with ESMTP id 9FEA740140 for ; Thu, 15 Jul 2021 09:10:29 +0200 (CEST) Received: by mail-il1-f169.google.com with SMTP id y6so4096912ilj.13 for ; Thu, 15 Jul 2021 00:10:29 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=mime-version:references:in-reply-to:from:date:message-id:subject:to :cc; bh=VvKd6BLiSRYiWMMSvM0ISxslFlIldQKWpiS/Ch3yVhw=; b=DEeKy226gPWb6LT5sf3pa85KH3RxYSOmBfYq2W2shAiXCXrU4cWi3+KDvfZOPZYu6C isBjJAgZ5UDkRldYu/i1MubJN2v1mJkfh2twg4GQqmg/68YSp2u895Dr5fLTb9THL0Df ltCsd0456NEWOw1qh+pQ7c1/rrW0vm4Nltk6oIO0F48hQg+a7M+1k3NLADlvfIib6hHT qTsxMar3XLnYC/8/Gj7zm9sZtn4R62z66Rs192CSnG01vw/8n7RTKKIcrQt+9A9CIvsB 2AiyLCA1iA1IMGL6+JlRSuKrzjmP0q69eOY49lWC8j8PBIkfydlecq6uKvf1n//ZlMYp Ou4w== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:mime-version:references:in-reply-to:from:date :message-id:subject:to:cc; bh=VvKd6BLiSRYiWMMSvM0ISxslFlIldQKWpiS/Ch3yVhw=; b=ScKxYtOzW2ECxDzLuNDEXozeDKqsNOjfuanJTBJZuGCgIiLGl4vhh4TKZ6xhjNCt4g lR0eJN4vQclBmG5gvmK/ACfqwvqYLhR+Srq1Q0LkrN70nerGP0cDvm993qNDpzVw57/U +kTCuMvFbCr0famGt1TxzyJhWKXSmafx0Iq9emFPfle/wjHlOrr4QGocQund15aDMqbE EXcUZ+e7Viy1B032+DzcCXMUqLFw1Ub85Zd0EaIQIL5DGoikl//JhHdQxsevt4OCjAOL Q+o8TeQZDGEp6+RwMY/MjJ/jCk+fsPOSYfhLW2k9BuO9e2eJqZi4HArSsMii9F5LTkXU hjrA== X-Gm-Message-State: AOAM532+rZay8qgfqxRLyGJH/H1z2RUvDNimS5dh5x4UitP2s3SqIEJw sQZ3fsvR6WEtpLXlt15Pgqlq7QLcby0G/79oRTY= X-Google-Smtp-Source: ABdhPJwrR5tF46YiFbCQYkYG904u6Yfcz5+nCem39AB8UvQZD48JJXqHmHV4u7G/pC8nHafJZ8TGXzfIBctjeNMD7mg= X-Received: by 2002:a92:d946:: with SMTP id l6mr1706804ilq.162.1626333028660; Thu, 15 Jul 2021 00:10:28 -0700 (PDT) MIME-Version: 1.0 References: <1625231891-2963-1-git-send-email-fengchengwen@huawei.com> <1626179263-14645-1-git-send-email-fengchengwen@huawei.com> In-Reply-To: <1626179263-14645-1-git-send-email-fengchengwen@huawei.com> From: Jerin Jacob Date: Thu, 15 Jul 2021 12:40:01 +0530 Message-ID: To: Chengwen Feng Cc: Thomas Monjalon , Ferruh Yigit , "Richardson, Bruce" , Jerin Jacob , Andrew Rybchenko , dpdk-dev , =?UTF-8?Q?Morten_Br=C3=B8rup?= , Nipun Gupta , Hemant Agrawal , Maxime Coquelin , Honnappa Nagarahalli , David Marchand , Satananda Burla , Prasun Kapoor , "Ananyev, Konstantin" Content-Type: text/plain; charset="UTF-8" Subject: Re: [dpdk-dev] [PATCH v3] dmadev: introduce DMA device library X-BeenThere: dev@dpdk.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: DPDK patches and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dev-bounces@dpdk.org Sender: "dev" ) a On Tue, Jul 13, 2021 at 6:01 PM Chengwen Feng wrote: > > This patch introduce 'dmadevice' which is a generic type of DMA > device. > > The APIs of dmadev library exposes some generic operations which can > enable configuration and I/O with the DMA devices. > > Signed-off-by: Chengwen Feng Thanks for v3. Seems like all major items as covered. Some more comments below inline. I would suggest v4 to split the patch like (so that we can review and ack each patch) 1) Only public header file with Doxygen inclusion, (There is a lot of Doxygen syntax issue in the patch) 2) 1 or more patches for implementation. > diff --git a/lib/dmadev/rte_dmadev.h b/lib/dmadev/rte_dmadev.h > new file mode 100644 > index 0000000..f6cc4e5 > --- /dev/null > +++ b/lib/dmadev/rte_dmadev.h > @@ -0,0 +1,968 @@ > +/* SPDX-License-Identifier: BSD-3-Clause > + * Copyright(c) 2021 HiSilicon Limited. > + * Copyright(c) 2021 Intel Corporation. > + * Copyright(c) 2021 Marvell International Ltd. > + * Copyright(c) 2021 SmartShare Systems. > + */ > + > +#ifndef _RTE_DMADEV_H_ > +#define _RTE_DMADEV_H_ > + > +/** > + * @file rte_dmadev.h > + * > + * RTE DMA (Direct Memory Access) device APIs. > + * > + * The DMA framework is built on the following model: > + * > + * --------------- --------------- --------------- > + * | virtual DMA | | virtual DMA | | virtual DMA | > + * | channel | | channel | | channel | > + * --------------- --------------- --------------- > + * | | | > + * ------------------ | > + * | | > + * ------------ ------------ > + * | dmadev | | dmadev | > + * ------------ ------------ > + * | | > + * ------------------ ------------------ > + * | HW-DMA-channel | | HW-DMA-channel | > + * ------------------ ------------------ > + * | | > + * -------------------------------- > + * | > + * --------------------- > + * | HW-DMA-Controller | > + * --------------------- > + * > + * The DMA controller could have multiple HW-DMA-channels (aka. HW-DMA-queues), > + * each HW-DMA-channel should be represented by a dmadev. > + * > + * The dmadev could create multiple virtual DMA channel, each virtual DMA > + * channel represents a different transfer context. The DMA operation request > + * must be submitted to the virtual DMA channel. > + * E.G. Application could create virtual DMA channel 0 for mem-to-mem transfer > + * scenario, and create virtual DMA channel 1 for mem-to-dev transfer > + * scenario. > + * > + * The dmadev are dynamically allocated by rte_dmadev_pmd_allocate() during the > + * PCI/SoC device probing phase performed at EAL initialization time. And could > + * be released by rte_dmadev_pmd_release() during the PCI/SoC device removing > + * phase. > + * > + * This framework uses 'uint16_t dev_id' as the device identifier of a dmadev, > + * and 'uint16_t vchan' as the virtual DMA channel identifier in one dmadev. > + * > + * The functions exported by the dmadev API to setup a device designated by its > + * device identifier must be invoked in the following order: > + * - rte_dmadev_configure() > + * - rte_dmadev_vchan_setup() > + * - rte_dmadev_start() > + * > + * Then, the application can invoke dataplane APIs to process jobs. > + * > + * If the application wants to change the configuration (i.e. call > + * rte_dmadev_configure()), it must call rte_dmadev_stop() first to stop the > + * device and then do the reconfiguration before calling rte_dmadev_start() > + * again. The dataplane APIs should not be invoked when the device is stopped. > + * > + * Finally, an application can close a dmadev by invoking the > + * rte_dmadev_close() function. > + * > + * The dataplane APIs include two parts: > + * a) The first part is the submission of operation requests: > + * - rte_dmadev_copy() > + * - rte_dmadev_copy_sg() - scatter-gather form of copy > + * - rte_dmadev_fill() > + * - rte_dmadev_fill_sg() - scatter-gather form of fill rte_dmadev_fill_sg already removed. > + * - rte_dmadev_perform() - issue doorbell to hardware > + * These APIs could work with different virtual DMA channels which have > + * different contexts. Please tell about SUBMIT flag option as well. > + * The first four APIs are used to submit the operation request to the > + * virtual DMA channel, if the submission is successful, a uint16_t > + * ring_idx is returned, otherwise a negative number is returned. > + * b) The second part is to obtain the result of requests: > + * - rte_dmadev_completed() > + * - return the number of operation requests completed successfully. > + * - rte_dmadev_completed_fails() > + * - return the number of operation requests failed to complete. > + * > + * About the ring_idx which rte_dmadev_copy/copy_sg/fill/fill_sg() returned, > + * the rules are as follows: > + * a) ring_idx for each virtual DMA channel are independent. > + * b) For a virtual DMA channel, the ring_idx is monotonically incremented, > + * when it reach UINT16_MAX, it wraps back to zero. > + * c) This ring_idx can be used by applications to track per-operation > + * metadata in an application-defined circular ring. > + * d) The initial ring_idx of a virtual DMA channel is zero, after the device > + * is stopped, the ring_idx needs to be reset to zero. > + * Example: > + * step-1: start one dmadev > + * step-2: enqueue a copy operation, the ring_idx return is 0 > + * step-3: enqueue a copy operation again, the ring_idx return is 1 > + * ... > + * step-101: stop the dmadev > + * step-102: start the dmadev > + * step-103: enqueue a copy operation, the cookie return is 0 > + * ... > + * step-x+0: enqueue a fill operation, the ring_idx return is 65535 > + * step-x+1: enqueue a copy operation, the ring_idx return is 0 > + * ... > + * > + * By default, all the functions of the dmadev API exported by a PMD are > + * lock-free functions which assume to not be invoked in parallel on different > + * logical cores to work on the same target object. > + * > + */ > + > +#include > +#include > +#ifdef RTE_DMADEV_DEBUG > +#include > +#endif > +#include > +#include > + > +#ifdef __cplusplus > +extern "C" { > +#endif > + > +#define RTE_DMADEV_NAME_MAX_LEN RTE_DEV_NAME_MAX_LEN > + > +/** > + * @warning > + * @b EXPERIMENTAL: this API may change without prior notice. > + * > + * @param dev_id > + * DMA device index. > + * > + * @return > + * - If the device index is valid (true) or not (false). > + */ > +__rte_experimental > +bool > +rte_dmadev_is_valid_dev(uint16_t dev_id); > + > +/** > + * @warning > + * @b EXPERIMENTAL: this API may change without prior notice. > + * > + * Get the total number of DMA devices that have been successfully > + * initialised. > + * > + * @return > + * The total number of usable DMA devices. > + */ > +__rte_experimental > +uint16_t > +rte_dmadev_count(void); > + > +/** > + * The capabilities of a DMA device > + */ > +#define RTE_DMA_DEV_CAPA_MEM_TO_MEM (1ull << 0) > +/**< DMA device support memory-to-memory transfer. > + * > + * @see struct rte_dmadev_info::dev_capa > + */ > +#define RTE_DMA_DEV_CAPA_MEM_TO_DEV (1ull << 1) > +/**< DMA device support memory-to-device transfer. > + * > + * @see struct rte_dmadev_info::dev_capa > + */ > +#define RTE_DMA_DEV_CAPA_DEV_TO_MEM (1ull << 2) > +/**< DMA device support device-to-memory transfer. > + * > + * @see struct rte_dmadev_info::dev_capa > + */ > +#define RTE_DMA_DEV_CAPA_DEV_TO_DEV (1ull << 3) > +/**< DMA device support device-to-device transfer. > + * > + * @see struct rte_dmadev_info::dev_capa > + */ > +#define RTE_DMA_DEV_CAPA_OPS_COPY (1ull << 4) > +/**< DMA device support copy ops. > + * > + * @see struct rte_dmadev_info::dev_capa > + */ > +#define RTE_DMA_DEV_CAPA_OPS_FILL (1ull << 5) > +/**< DMA device support fill ops. > + * > + * @see struct rte_dmadev_info::dev_capa > + */ > +#define RTE_DMA_DEV_CAPA_OPS_SG (1ull << 6) > +/**< DMA device support scatter-list ops. > + * If device support ops_copy and ops_sg, it means supporting copy_sg ops. > + * > + * @see struct rte_dmadev_info::dev_capa > + */ > +#define RTE_DMA_DEV_CAPA_FENCE (1ull << 7) > +/**< DMA device support fence. > + * If device support fence, then application could set a fence flags when > + * enqueue operation by rte_dma_copy/copy_sg/fill/fill_sg. > + * If a operation has a fence flags, it means the operation must be processed > + * only after all previous operations are completed. > + * > + * @see struct rte_dmadev_info::dev_capa > + */ > +#define RTE_DMA_DEV_CAPA_SVA (1ull << 8) > +/**< DMA device support SVA which could use VA as DMA address. > + * If device support SVA then application could pass any VA address like memory > + * from rte_malloc(), rte_memzone(), malloc, stack memory. > + * If device don't support SVA, then application should pass IOVA address which > + * from rte_malloc(), rte_memzone(). > + * > + * @see struct rte_dmadev_info::dev_capa > + */ > + > +/** > + * A structure used to retrieve the contextual information of > + * an DMA device > + */ > +struct rte_dmadev_info { > + struct rte_device *device; /**< Generic Device information */ > + uint64_t dev_capa; /**< Device capabilities (RTE_DMA_DEV_CAPA_*) */ > + /** Maximum number of virtual DMA channels supported */ > + uint16_t max_vchans; > + /** Maximum allowed number of virtual DMA channel descriptors */ > + uint16_t max_desc; > + /** Minimum allowed number of virtual DMA channel descriptors */ > + uint16_t min_desc; > + uint16_t nb_vchans; /**< Number of virtual DMA channel configured */ > +}; > + > +/** > + * @warning > + * @b EXPERIMENTAL: this API may change without prior notice. > + * > + * Retrieve the contextual information of a DMA device. > + * > + * @param dev_id > + * The identifier of the device. > + * @param[out] dev_info > + * A pointer to a structure of type *rte_dmadev_info* to be filled with the > + * contextual information of the device. > + * > + * @return > + * - =0: Success, driver updates the contextual information of the DMA device > + * - <0: Error code returned by the driver info get function. > + * > + */ > +__rte_experimental > +int > +rte_dmadev_info_get(uint16_t dev_id, struct rte_dmadev_info *dev_info); > + > +/** > + * A structure used to configure a DMA device. > + */ > +struct rte_dmadev_conf { > + /** Maximum number of virtual DMA channel to use. > + * This value cannot be greater than the field 'max_vchans' of struct > + * rte_dmadev_info which get from rte_dmadev_info_get(). > + */ > + uint16_t max_vchans; > +}; > + > +/** > + * @warning > + * @b EXPERIMENTAL: this API may change without prior notice. > + * > + * Configure a DMA device. > + * > + * This function must be invoked first before any other function in the > + * API. This function can also be re-invoked when a device is in the > + * stopped state. > + * > + * @param dev_id > + * The identifier of the device to configure. > + * @param dev_conf > + * The DMA device configuration structure encapsulated into rte_dmadev_conf > + * object. > + * > + * @return > + * - =0: Success, device configured. > + * - <0: Error code returned by the driver configuration function. > + */ > +__rte_experimental > +int > +rte_dmadev_configure(uint16_t dev_id, const struct rte_dmadev_conf *dev_conf); > + > +/** > + * @warning > + * @b EXPERIMENTAL: this API may change without prior notice. > + * > + * Start a DMA device. > + * > + * The device start step is the last one and consists of setting the DMA > + * to start accepting jobs. > + * > + * @param dev_id > + * The identifier of the device. > + * > + * @return > + * - =0: Success, device started. > + * - <0: Error code returned by the driver start function. > + */ > +__rte_experimental > +int > +rte_dmadev_start(uint16_t dev_id); > + > +/** > + * @warning > + * @b EXPERIMENTAL: this API may change without prior notice. > + * > + * Stop a DMA device. > + * > + * The device can be restarted with a call to rte_dmadev_start() > + * > + * @param dev_id > + * The identifier of the device. > + * > + * @return > + * - =0: Success, device stopped. > + * - <0: Error code returned by the driver stop function. > + */ > +__rte_experimental > +int > +rte_dmadev_stop(uint16_t dev_id); > + > +/** > + * @warning > + * @b EXPERIMENTAL: this API may change without prior notice. > + * > + * Close a DMA device. > + * > + * The device cannot be restarted after this call. > + * > + * @param dev_id > + * The identifier of the device. > + * > + * @return > + * - =0: Successfully close device > + * - <0: Failure to close device > + */ > +__rte_experimental > +int > +rte_dmadev_close(uint16_t dev_id); > + > +/** > + * DMA transfer direction defines. > + */ > +#define RTE_DMA_MEM_TO_MEM (1ull << 0) RTE_DMA_DIR_MEM_TO_MEM > +/**< DMA transfer direction - from memory to memory. > + * > + * @see struct rte_dmadev_vchan_conf::direction > + */ > +#define RTE_DMA_MEM_TO_DEV (1ull << 1) > +/**< DMA transfer direction - from memory to device. > + * In a typical scenario, ARM SoCs are installed on x86 servers as iNICs > + * through the PCIE interface. In this case, the ARM SoCs works in EP(endpoint) > + * mode, it could initiate a DMA move request from memory (which is ARM memory) > + * to device (which is x86 host memory). > + * > + * @see struct rte_dmadev_vchan_conf::direction Also point rte_dmadev_port_parameters::port_type > + */ > +#define RTE_DMA_DEV_TO_MEM (1ull << 2) > +/**< DMA transfer direction - from device to memory. > + * In a typical scenario, ARM SoCs are installed on x86 servers as iNICs > + * through the PCIE interface. In this case, the ARM SoCs works in EP(endpoint) > + * mode, it could initiate a DMA move request from device (which is x86 host > + * memory) to memory (which is ARM memory). > + * > + * @see struct rte_dmadev_vchan_conf::direction Also point rte_dmadev_port_parameters::port_type > + */ > +#define RTE_DMA_DEV_TO_DEV (1ull << 3) > +/**< DMA transfer direction - from device to device. > + * In a typical scenario, ARM SoCs are installed on x86 servers as iNICs > + * through the PCIE interface. In this case, the ARM SoCs works in EP(endpoint) > + * mode, it could initiate a DMA move request from device (which is x86 host > + * memory) to device (which is another x86 host memory). > + * > + * @see struct rte_dmadev_vchan_conf::direction Also point rte_dmadev_port_parameters::port_type > + */ > +#define RTE_DMA_TRANSFER_DIR_ALL (RTE_DMA_MEM_TO_MEM | \ > + RTE_DMA_MEM_TO_DEV | \ > + RTE_DMA_DEV_TO_MEM | \ > + RTE_DMA_DEV_TO_DEV) RTE_DMA_DIR_ALL ?? > + > +/** > + * enum rte_dmadev_port_type - DMA port type defines > + * When > + */ > +enum rte_dmadev_port_type { > + /** The device port type is PCIE. */ > + RTE_DMADEV_PORT_OF_PCIE = 1, Is OF required ? RTE_DMADEV_PORT_PCIE > +}; > + > +/** > + * A structure used to descript DMA port parameters. > + */ > +struct rte_dmadev_port_parameters { Please make this as param or params. rte_dmadev_port_param > + enum rte_dmadev_port_type port_type; missing doxgen comment for this. > + union { > + /** For PCIE port > + * > + * The following model show SoC's PCIE module connects to > + * multiple PCIE hosts and multiple endpoints. The PCIE module > + * has an integrate DMA controller. > + * If the DMA wants to access the memory of host A, it can be > + * initiated by PF1 in core0, or by VF0 of PF0 in core0. > + * > + * System Bus > + * | ----------PCIE module---------- > + * | Bus > + * | Interface > + * | ----- ------------------ > + * | | | | PCIE Core0 | > + * | | | | | ----------- > + * | | | | PF-0 -- VF-0 | | Host A | > + * | | |--------| |- VF-1 |--------| Root | > + * | | | | PF-1 | | Complex | > + * | | | | PF-2 | ----------- > + * | | | ------------------ > + * | | | > + * | | | ------------------ > + * | | | | PCIE Core1 | > + * | | | | | ----------- > + * | | | | PF-0 -- VF-0 | | Host B | > + * |-----| |--------| PF-1 -- VF-0 |--------| Root | > + * | | | | |- VF-1 | | Complex | > + * | | | | PF-2 | ----------- > + * | | | ------------------ > + * | | | > + * | | | ------------------ > + * | |DMA| | | ------ > + * | | | | |--------| EP | > + * | | |--------| PCIE Core2 | ------ > + * | | | | | ------ > + * | | | | |--------| EP | > + * | | | | | ------ > + * | ----- ------------------ > + * > + * The following structure is used to describe the above access > + * port. > + */ > + struct { > + uint64_t coreid : 3; /**< PCIE core id used */ > + uint64_t pfid : 6; /**< PF id used */ > + uint64_t vfen : 1; /**< VF enable bit */ > + uint64_t vfid : 8; /**< VF id used */ We support up to 12bit. So please make this as 12bit. Also, this is in a slow path, we may not bitfield here. > + /** The pasid filed in TLP packet */ > + uint64_t pasid : 20; > + /** The attributes filed in TLP packet */ > + uint64_t attr : 3; > + /** The processing hint filed in TLP packet */ > + uint64_t ph : 2; > + /** The steering tag filed in TLP packet */ > + uint64_t st : 16; We don't support a few attributes like passid, ph, st. Do we need the capability of this? or ignore this. In either case, please update the doc. We also support additional flags for allocating LLC flag. This is a hint to DMA engine that the cache blocks should be allocated in the LLC (if they were not already). When the MEM pointer is a destination in DMA operation, the referenced cache blocks are allocated into the cache as part of completing the DMA (when not already present in the LLC) this is helpful if software has to access the data right after dma is completed. Could you add bit or flag for the same? > + } pcie; > + }; > + uint64_t reserved[2]; /**< Reserved for future fields */ > +}; > + > +/** > + * A structure used to configure a virtual DMA channel. > + */ > +struct rte_dmadev_vchan_conf { > + uint8_t direction; > + /**< Set of supported transfer directions > + * @see RTE_DMA_MEM_TO_MEM > + * @see RTE_DMA_MEM_TO_DEV > + * @see RTE_DMA_DEV_TO_MEM > + * @see RTE_DMA_DEV_TO_DEV Since we can set of only one direction per vchan . Should be we make it as enum to make it clear. > + */ > + /** Number of descriptor for the virtual DMA channel */ > + uint16_t nb_desc; > + /** 1) Used to describes the port parameter in the device-to-memory > + * transfer scenario. > + * 2) Used to describes the source port parameter in the > + * device-to-device transfer scenario. > + * @see struct rte_dmadev_port_parameters > + */ > + struct rte_dmadev_port_parameters src_port; > + /** 1) Used to describes the port parameter in the memory-to-device-to > + * transfer scenario. > + * 2) Used to describes the destination port parameter in the > + * device-to-device transfer scenario. > + * @see struct rte_dmadev_port_parameters > + */ > + struct rte_dmadev_port_parameters dst_port; > +}; > + > +/** > + * @warning > + * @b EXPERIMENTAL: this API may change without prior notice. > + * > + * Allocate and set up a virtual DMA channel. > + * > + * @param dev_id > + * The identifier of the device. > + * @param conf > + * The virtual DMA channel configuration structure encapsulated into > + * rte_dmadev_vchan_conf object. > + * > + * @return > + * - >=0: Allocate success, it is the virtual DMA channel id. This value must > + * be less than the field 'max_vchans' of struct rte_dmadev_conf > + * which configured by rte_dmadev_configure(). > + * - <0: Error code returned by the driver virtual channel setup function. > + */ > +__rte_experimental > +int > +rte_dmadev_vchan_setup(uint16_t dev_id, > + const struct rte_dmadev_vchan_conf *conf); > + > +/** > + * @warning > + * @b EXPERIMENTAL: this API may change without prior notice. > + * > + * Release a virtual DMA channel. > + * > + * @param dev_id > + * The identifier of the device. > + * @param vchan > + * The identifier of virtual DMA channel which return by vchan setup. > + * > + * @return > + * - =0: Successfully release the virtual DMA channel. > + * - <0: Error code returned by the driver virtual channel release function. > + */ > +__rte_experimental > +int > +rte_dmadev_vchan_release(uint16_t dev_id, uint16_t vchan); I would like to remove this to align with other device class in DPDK and use configure and start again if there change in vchannel setup/ > + > +/** > + * rte_dmadev_stats - running statistics. > + */ > +struct rte_dmadev_stats { > + /** Count of operations which were successfully enqueued */ > + uint64_t enqueued_count; > + /** Count of operations which were submitted to hardware */ > + uint64_t submitted_count; > + /** Count of operations which failed to complete */ > + uint64_t completed_fail_count; > + /** Count of operations which successfully complete */ > + uint64_t completed_count; > +}; Provided comment on stats, in another thread. > + > +#define RTE_DMADEV_ALL_VCHAN 0xFFFFu RTE_DMADEV_VCHAN_ALL ?? > + > +/** > + * @warning > + * @b EXPERIMENTAL: this API may change without prior notice. > + * > + * Retrieve basic statistics of a or all virtual DMA channel(s). > + * > + * @param dev_id > + * The identifier of the device. > + * @param vchan > + * The identifier of virtual DMA channel. > + * If equal RTE_DMADEV_ALL_VCHAN means all channels. > + * @param[out] stats > + * The basic statistics structure encapsulated into rte_dmadev_stats > + * object. > + * > + * @return > + * - =0: Successfully retrieve stats. > + * - <0: Failure to retrieve stats. > + */ > +__rte_experimental > +int > +rte_dmadev_stats_get(uint16_t dev_id, uint16_t vchan, > + struct rte_dmadev_stats *stats); > + > +/** > + * @warning > + * @b EXPERIMENTAL: this API may change without prior notice. > + * > + * Reset basic statistics of a or all virtual DMA channel(s). > + * > + * @param dev_id > + * The identifier of the device. > + * @param vchan > + * The identifier of virtual DMA channel. > + * If equal RTE_DMADEV_ALL_VCHAN means all channels. > + * > + * @return > + * - =0: Successfully reset stats. > + * - <0: Failure to reset stats. > + */ > +__rte_experimental > +int > +rte_dmadev_stats_reset(uint16_t dev_id, uint16_t vchan); > + > +/** > + * @warning > + * @b EXPERIMENTAL: this API may change without prior notice. > + * > + * Dump DMA device info. > + * > + * @param dev_id > + * The identifier of the device. > + * @param f > + * The file to write the output to. > + * > + * @return > + * 0 on success. Non-zero otherwise. > + */ > +__rte_experimental > +int > +rte_dmadev_dump(uint16_t dev_id, FILE *f); > + > +/** > + * @warning > + * @b EXPERIMENTAL: this API may change without prior notice. > + * > + * Trigger the dmadev self test. > + * > + * @param dev_id > + * The identifier of the device. > + * > + * @return > + * - 0: Selftest successful. > + * - -ENOTSUP if the device doesn't support selftest > + * - other values < 0 on failure. > + */ > +__rte_experimental > +int > +rte_dmadev_selftest(uint16_t dev_id); > + > +/** > + * rte_dma_sge - can hold scatter DMA operation request entry > + */ > +struct rte_dma_sge { > + rte_iova_t addr; > + uint32_t length; > +}; > + > +/** > + * rte_dma_sg - can hold scatter DMA operation request > + */ > +struct rte_dma_sg { > + struct rte_dma_sge *src; > + struct rte_dma_sge *dst; > + uint16_t nb_src; /**< The number of src entry */ > + uint16_t nb_dst; /**< The number of dst entry */ > +}; > + > +#include "rte_dmadev_core.h" > + > +/** > + * DMA flags to augment operation preparation. > + * Used as the 'flags' parameter of rte_dmadev_copy/fill. > + */ > +#define RTE_DMA_OP_FLAG_FENCE (1ull << 0) > +/**< DMA fence flag > + * It means the operation with this flag must be processed only after all > + * previous operations are completed. > + * > + * @see rte_dmadev_copy() > + * @see rte_dmadev_copy_sg() > + * @see rte_dmadev_fill() > + */ > +#define RTE_DMA_OP_FLAG_SUBMIT (1ull << 1) > +/**< DMA submit flag > + * It means the operation with this flag must issue doorbell to hardware after > + * enqueued jobs. > + */ > + > +/** > + * @warning > + * @b EXPERIMENTAL: this API may change without prior notice. > + * > + * Enqueue a copy operation onto the virtual DMA channel. > + * > + * This queues up a copy operation to be performed by hardware, but does not > + * trigger hardware to begin that operation. > + * > + * @param dev_id > + * The identifier of the device. > + * @param vchan > + * The identifier of virtual DMA channel. > + * @param src > + * The address of the source buffer. > + * @param dst > + * The address of the destination buffer. > + * @param length > + * The length of the data to be copied. > + * @param flags > + * An flags for this operation. > + * @see RTE_DMA_OP_FLAG_* > + * > + * @return > + * - 0..UINT16_MAX: index of enqueued copy job. > + * - <0: Error code returned by the driver copy function. > + */ > +__rte_experimental > +static inline int > +rte_dmadev_copy(uint16_t dev_id, uint16_t vchan, rte_iova_t src, rte_iova_t dst, > + uint32_t length, uint64_t flags) > +{ > + struct rte_dmadev *dev = &rte_dmadevices[dev_id]; > +#ifdef RTE_DMADEV_DEBUG > + if (!rte_dmadev_is_valid_dev(dev_id) || > + vchan >= dev->data->dev_conf.max_vchans) > + return -EINVAL; > + RTE_FUNC_PTR_OR_ERR_RET(*dev->copy, -ENOTSUP); > +#endif > + return (*dev->copy)(dev, vchan, src, dst, length, flags); > +} > + > +/** > + * @warning > + * @b EXPERIMENTAL: this API may change without prior notice. > + * > + * Enqueue a scatter list copy operation onto the virtual DMA channel. > + * > + * This queues up a scatter list copy operation to be performed by hardware, > + * but does not trigger hardware to begin that operation. > + * > + * @param dev_id > + * The identifier of the device., > + * @param vchan > + * The identifier of virtual DMA channel. > + * @param sg > + * The pointer of scatterlist. > + * @param flags > + * An flags for this operation. > + * @see RTE_DMA_OP_FLAG_* > + * > + * @return > + * - 0..UINT16_MAX: index of enqueued copy scatterlist job. > + * - <0: Error code returned by the driver copy scatterlist function. > + */ > +__rte_experimental > +static inline int > +rte_dmadev_copy_sg(uint16_t dev_id, uint16_t vchan, const struct rte_dma_sg *sg, > + uint64_t flags) In order to avoid population of rte_dma_sg in stack (as it is fastpath), I would like to change the API as rte_dmadev_copy_sg(uint16_t dev_id, uint16_t vchan, struct rte_dma_sge *src, struct rte_dma_sge *dst, uint16_t nb_src, uint16_t nb_dst, uint64_t flags) > +{ > + struct rte_dmadev *dev = &rte_dmadevices[dev_id]; > +#ifdef RTE_DMADEV_DEBUG > + if (!rte_dmadev_is_valid_dev(dev_id) || > + vchan >= dev->data->dev_conf.max_vchans || > + sg == NULL) > + return -EINVAL; > + RTE_FUNC_PTR_OR_ERR_RET(*dev->copy_sg, -ENOTSUP); > +#endif > + return (*dev->copy_sg)(dev, vchan, sg, flags); > +} > + > +/** > + * @warning > + * @b EXPERIMENTAL: this API may change without prior notice. > + * > + * Enqueue a fill operation onto the virtual DMA channel. > + * > + * This queues up a fill operation to be performed by hardware, but does not > + * trigger hardware to begin that operation. > + * > + * @param dev_id > + * The identifier of the device. > + * @param vchan > + * The identifier of virtual DMA channel. > + * @param pattern > + * The pattern to populate the destination buffer with. > + * @param dst > + * The address of the destination buffer. > + * @param length > + * The length of the destination buffer. > + * @param flags > + * An flags for this operation. > + * @see RTE_DMA_OP_FLAG_* > + * > + * @return > + * - 0..UINT16_MAX: index of enqueued fill job. > + * - <0: Error code returned by the driver fill function. > + */ > +__rte_experimental > +static inline int > +rte_dmadev_fill(uint16_t dev_id, uint16_t vchan, uint64_t pattern, > + rte_iova_t dst, uint32_t length, uint64_t flags) > +{ > + struct rte_dmadev *dev = &rte_dmadevices[dev_id]; > +#ifdef RTE_DMADEV_DEBUG > + if (!rte_dmadev_is_valid_dev(dev_id) || > + vchan >= dev->data->dev_conf.max_vchans) > + return -EINVAL; > + RTE_FUNC_PTR_OR_ERR_RET(*dev->fill, -ENOTSUP); > +#endif > + return (*dev->fill)(dev, vchan, pattern, dst, length, flags); > +} > + > +/** > + * @warning > + * @b EXPERIMENTAL: this API may change without prior notice. > + * > + * Trigger hardware to begin performing enqueued operations. > + * > + * This API is used to write the "doorbell" to the hardware to trigger it > + * to begin the operations previously enqueued by rte_dmadev_copy/fill() > + * > + * @param dev_id > + * The identifier of the device. > + * @param vchan > + * The identifier of virtual DMA channel. > + * > + * @return > + * - =0: Successfully trigger hardware. > + * - <0: Failure to trigger hardware. > + */ > +__rte_experimental > +static inline int > +rte_dmadev_submit(uint16_t dev_id, uint16_t vchan) > +{ > + struct rte_dmadev *dev = &rte_dmadevices[dev_id]; > +#ifdef RTE_DMADEV_DEBUG > + if (!rte_dmadev_is_valid_dev(dev_id) || > + vchan >= dev->data->dev_conf.max_vchans) > + return -EINVAL; > + RTE_FUNC_PTR_OR_ERR_RET(*dev->submit, -ENOTSUP); > +#endif > + return (*dev->submit)(dev, vchan); > +} > + > +/** > + * @warning > + * @b EXPERIMENTAL: this API may change without prior notice. > + * > + * Returns the number of operations that have been successfully completed. > + * > + * @param dev_id > + * The identifier of the device. > + * @param vchan > + * The identifier of virtual DMA channel. > + * @param nb_cpls > + * The maximum number of completed operations that can be processed. > + * @param[out] last_idx > + * The last completed operation's index. > + * If not required, NULL can be passed in. > + * @param[out] has_error > + * Indicates if there are transfer error. > + * If not required, NULL can be passed in. > + * > + * @return > + * The number of operations that successfully completed. > + */ > +__rte_experimental > +static inline uint16_t > +rte_dmadev_completed(uint16_t dev_id, uint16_t vchan, const uint16_t nb_cpls, > + uint16_t *last_idx, bool *has_error) > +{ > + struct rte_dmadev *dev = &rte_dmadevices[dev_id]; > + uint16_t idx; > + bool err; > + > +#ifdef RTE_DMADEV_DEBUG > + if (!rte_dmadev_is_valid_dev(dev_id) || > + vchan >= dev->data->dev_conf.max_vchans || > + nb_cpls == 0) > + return -EINVAL; > + RTE_FUNC_PTR_OR_ERR_RET(*dev->completed, -ENOTSUP); > +#endif > + > + /* Ensure the pointer values are non-null to simplify drivers. > + * In most cases these should be compile time evaluated, since this is > + * an inline function. > + * - If NULL is explicitly passed as parameter, then compiler knows the > + * value is NULL > + * - If address of local variable is passed as parameter, then compiler > + * can know it's non-NULL. > + */ > + if (last_idx == NULL) > + last_idx = &idx; > + if (has_error == NULL) > + has_error = &err; > + > + *has_error = false; > + return (*dev->completed)(dev, vchan, nb_cpls, last_idx, has_error); > +} > + > +/** > + * DMA transfer status code defines > + */ > +enum rte_dma_status_code { > + /** The operation completed successfully */ > + RTE_DMA_STATUS_SUCCESSFUL = 0, > + /** The operation failed to complete due active drop > + * This is mainly used when processing dev_stop, allow outstanding > + * requests to be completed as much as possible. > + */ > + RTE_DMA_STATUS_ACTIVE_DROP, > + /** The operation failed to complete due invalid source address */ > + RTE_DMA_STATUS_INVALID_SRC_ADDR, > + /** The operation failed to complete due invalid destination address */ > + RTE_DMA_STATUS_INVALID_DST_ADDR, > + /** The operation failed to complete due invalid length */ > + RTE_DMA_STATUS_INVALID_LENGTH, > + /** The operation failed to complete due invalid opcode > + * The DMA descriptor could have multiple format, which are > + * distinguished by the opcode field. > + */ > + RTE_DMA_STATUS_INVALID_OPCODE, > + /** The operation failed to complete due bus err */ > + RTE_DMA_STATUS_BUS_ERROR, > + /** The operation failed to complete due data poison */ > + RTE_DMA_STATUS_DATA_POISION, > + /** The operation failed to complete due descriptor read error */ > + RTE_DMA_STATUS_DESCRIPTOR_READ_ERROR, > + /** The operation failed to complete due device link error > + * Used to indicates that the link error in the mem-to-dev/dev-to-mem/ > + * dev-to-dev transfer scenario. > + */ > + RTE_DMA_STATUS_DEV_LINK_ERROR, > + /** The operation failed to complete due unknown reason */ > + RTE_DMA_STATUS_UNKNOWN, > + /** Driver specific status code offset > + * Start status code for the driver to define its own error code. > + */ > + RTE_DMA_STATUS_DRV_SPECIFIC_OFFSET = 0x10000, > +}; > + > +/** > + * @warning > + * @b EXPERIMENTAL: this API may change without prior notice. > + * > + * Returns the number of operations that failed to complete. > + * NOTE: This API was used when rte_dmadev_completed has_error was set. > + * > + * @param dev_id > + * The identifier of the device. > + * @param vchan > + * The identifier of virtual DMA channel. > + * @param nb_status > + * Indicates the size of status array. > + * @param[out] status > + * The error code of operations that failed to complete. > + * Some standard error code are described in 'enum rte_dma_status_code' > + * @see rte_dma_status_code > + * @param[out] last_idx > + * The last failed completed operation's index. > + * > + * @return > + * The number of operations that failed to complete. > + */ > +__rte_experimental > +static inline uint16_t > +rte_dmadev_completed_fails(uint16_t dev_id, uint16_t vchan, > + const uint16_t nb_status, uint32_t *status, > + uint16_t *last_idx) > +{ > + struct rte_dmadev *dev = &rte_dmadevices[dev_id]; > +#ifdef RTE_DMADEV_DEBUG > + if (!rte_dmadev_is_valid_dev(dev_id) || > + vchan >= dev->data->dev_conf.max_vchans || > + nb_status == 0 || > + status == NULL || > + last_idx == NULL) > + return -EINVAL; > + RTE_FUNC_PTR_OR_ERR_RET(*dev->completed_fails, -ENOTSUP); > +#endif > + return (*dev->completed_fails)(dev, vchan, nb_status, status, last_idx); > +} > + > +#ifdef __cplusplus > +} > +#endif > + > +#endif /* _RTE_DMADEV_H_ */ > diff --git a/lib/dmadev/rte_dmadev_core.h b/lib/dmadev/rte_dmadev_core.h > new file mode 100644 > index 0000000..b0b6494 > --- /dev/null > +++ b/lib/dmadev/rte_dmadev_core.h > @@ -0,0 +1,161 @@ > +/* SPDX-License-Identifier: BSD-3-Clause > + * Copyright(c) 2021 HiSilicon Limited. > + * Copyright(c) 2021 Intel Corporation. > + */ > + > +#ifndef _RTE_DMADEV_CORE_H_ > +#define _RTE_DMADEV_CORE_H_ > + > +/** > + * @file > + * > + * RTE DMA Device internal header. > + * > + * This header contains internal data types, that are used by the DMA devices > + * in order to expose their ops to the class. > + * > + * Applications should not use these API directly. > + * > + */ > + > +struct rte_dmadev; > + > +/** @internal Used to get device information of a device. */ > +typedef int (*dmadev_info_get_t)(const struct rte_dmadev *dev, > + struct rte_dmadev_info *dev_info, > + uint32_t info_sz); > + > +/** @internal Used to configure a device. */ > +typedef int (*dmadev_configure_t)(struct rte_dmadev *dev, > + const struct rte_dmadev_conf *dev_conf); > + > +/** @internal Used to start a configured device. */ > +typedef int (*dmadev_start_t)(struct rte_dmadev *dev); > + > +/** @internal Used to stop a configured device. */ > +typedef int (*dmadev_stop_t)(struct rte_dmadev *dev); > + > +/** @internal Used to close a configured device. */ > +typedef int (*dmadev_close_t)(struct rte_dmadev *dev); > + > +/** @internal Used to allocate and set up a virtual DMA channel. */ > +typedef int (*dmadev_vchan_setup_t)(struct rte_dmadev *dev, > + const struct rte_dmadev_vchan_conf *conf); > + > +/** @internal Used to release a virtual DMA channel. */ > +typedef int (*dmadev_vchan_release_t)(struct rte_dmadev *dev, uint16_t vchan); > + > +/** @internal Used to retrieve basic statistics. */ > +typedef int (*dmadev_stats_get_t)(const struct rte_dmadev *dev, uint16_t vchan, > + struct rte_dmadev_stats *stats, > + uint32_t stats_sz); > + > +/** @internal Used to reset basic statistics. */ > +typedef int (*dmadev_stats_reset_t)(struct rte_dmadev *dev, uint16_t vchan); > + > +/** @internal Used to dump internal information. */ > +typedef int (*dmadev_dump_t)(const struct rte_dmadev *dev, FILE *f); > + > +/** @internal Used to start dmadev selftest. */ > +typedef int (*dmadev_selftest_t)(uint16_t dev_id); > + > +/** @internal Used to enqueue a copy operation. */ > +typedef int (*dmadev_copy_t)(struct rte_dmadev *dev, uint16_t vchan, > + rte_iova_t src, rte_iova_t dst, > + uint32_t length, uint64_t flags); > + > +/** @internal Used to enqueue a scatter list copy operation. */ > +typedef int (*dmadev_copy_sg_t)(struct rte_dmadev *dev, uint16_t vchan, > + const struct rte_dma_sg *sg, uint64_t flags); > + > +/** @internal Used to enqueue a fill operation. */ > +typedef int (*dmadev_fill_t)(struct rte_dmadev *dev, uint16_t vchan, > + uint64_t pattern, rte_iova_t dst, > + uint32_t length, uint64_t flags); > + > +/** @internal Used to trigger hardware to begin working. */ > +typedef int (*dmadev_submit_t)(struct rte_dmadev *dev, uint16_t vchan); > + > +/** @internal Used to return number of successful completed operations. */ > +typedef uint16_t (*dmadev_completed_t)(struct rte_dmadev *dev, uint16_t vchan, > + const uint16_t nb_cpls, > + uint16_t *last_idx, bool *has_error); > + > +/** @internal Used to return number of failed completed operations. */ > +typedef uint16_t (*dmadev_completed_fails_t)(struct rte_dmadev *dev, > + uint16_t vchan, const uint16_t nb_status, > + uint32_t *status, uint16_t *last_idx); > + > +/** > + * Possible states of a DMA device. > + */ > +enum rte_dmadev_state { > + /** Device is unused before being probed. */ > + RTE_DMADEV_UNUSED = 0, > + /** Device is attached when allocated in probing. */ > + RTE_DMADEV_ATTACHED, > +}; > + > +/** > + * DMA device operations function pointer table > + */ > +struct rte_dmadev_ops { > + dmadev_info_get_t dev_info_get; > + dmadev_configure_t dev_configure; > + dmadev_start_t dev_start; > + dmadev_stop_t dev_stop; > + dmadev_close_t dev_close; > + dmadev_vchan_setup_t vchan_setup; > + dmadev_vchan_release_t vchan_release; > + dmadev_stats_get_t stats_get; > + dmadev_stats_reset_t stats_reset; > + dmadev_dump_t dev_dump; > + dmadev_selftest_t dev_selftest; > +}; > + > +/** > + * @internal > + * The data part, with no function pointers, associated with each DMA device. > + * > + * This structure is safe to place in shared memory to be common among different > + * processes in a multi-process configuration. > + */ > +struct rte_dmadev_data { > + void *dev_private; /**< PMD-specific private data. */ > + uint16_t dev_id; /**< Device [external] identifier. */ > + char dev_name[RTE_DMADEV_NAME_MAX_LEN]; /**< Unique identifier name */ > + struct rte_dmadev_conf dev_conf; /**< DMA device configuration. */ > + uint8_t dev_started : 1; /**< Device state: STARTED(1)/STOPPED(0). */ > + uint64_t reserved[2]; /**< Reserved for future fields */ > +} __rte_cache_aligned; > + > +/** > + * @internal > + * The generic data structure associated with each DMA device. > + * > + * The dataplane APIs are located at the beginning of the structure, along > + * with the pointer to where all the data elements for the particular device > + * are stored in shared memory. This split scheme allows the function pointer > + * and driver data to be per-process, while the actual configuration data for > + * the device is shared. > + */ > +struct rte_dmadev { > + dmadev_copy_t copy; > + dmadev_copy_sg_t copy_sg; > + dmadev_fill_t fill; > + dmadev_submit_t submit; > + dmadev_completed_t completed; > + dmadev_completed_fails_t completed_fails; > + void *reserved_ptr; /**< Reserved for future IO function */ > + struct rte_dmadev_data *data; /**< Pointer to device data. */ > + > + const struct rte_dmadev_ops *dev_ops; /**< Functions exported by PMD. */ > + /** Device info which supplied during device initialization. */ > + struct rte_device *device; > + enum rte_dmadev_state state; /**< Flag indicating the device state */ > + uint64_t reserved[2]; /**< Reserved for future fields */ > +} __rte_cache_aligned; > + > +extern struct rte_dmadev rte_dmadevices[]; > + > +#endif /* _RTE_DMADEV_CORE_H_ */ > diff --git a/lib/dmadev/rte_dmadev_pmd.h b/lib/dmadev/rte_dmadev_pmd.h > new file mode 100644 > index 0000000..45141f9 > --- /dev/null > +++ b/lib/dmadev/rte_dmadev_pmd.h > @@ -0,0 +1,72 @@ > +/* SPDX-License-Identifier: BSD-3-Clause > + * Copyright(c) 2021 HiSilicon Limited. > + */ > + > +#ifndef _RTE_DMADEV_PMD_H_ > +#define _RTE_DMADEV_PMD_H_ > + > +/** > + * @file > + * > + * RTE DMA Device PMD APIs > + * > + * Driver facing APIs for a DMA device. These are not to be called directly by > + * any application. > + */ > + > +#include "rte_dmadev.h" > + > +#ifdef __cplusplus > +extern "C" { > +#endif > + > +/** > + * @internal > + * Allocates a new dmadev slot for an DMA device and returns the pointer > + * to that slot for the driver to use. > + * > + * @param name > + * DMA device name. > + * > + * @return > + * A pointer to the DMA device slot case of success, > + * NULL otherwise. > + */ > +__rte_internal > +struct rte_dmadev * > +rte_dmadev_pmd_allocate(const char *name); > + > +/** > + * @internal > + * Release the specified dmadev. > + * > + * @param dev > + * Device to be released. > + * > + * @return > + * - 0 on success, negative on error > + */ > +__rte_internal > +int > +rte_dmadev_pmd_release(struct rte_dmadev *dev); > + > +/** > + * @internal > + * Return the DMA device based on the device name. > + * > + * @param name > + * DMA device name. > + * > + * @return > + * A pointer to the DMA device slot case of success, > + * NULL otherwise. > + */ > +__rte_internal > +struct rte_dmadev * > +rte_dmadev_get_device_by_name(const char *name); > + > +#ifdef __cplusplus > +} > +#endif > + > +#endif /* _RTE_DMADEV_PMD_H_ */ > diff --git a/lib/dmadev/version.map b/lib/dmadev/version.map > new file mode 100644 > index 0000000..2af78e4 > --- /dev/null > +++ b/lib/dmadev/version.map > @@ -0,0 +1,37 @@ > +EXPERIMENTAL { > + global: > + > + rte_dmadev_close; > + rte_dmadev_completed; > + rte_dmadev_completed_fails; > + rte_dmadev_configure; > + rte_dmadev_copy; > + rte_dmadev_copy_sg; > + rte_dmadev_count; > + rte_dmadev_dump; > + rte_dmadev_fill; > + rte_dmadev_info_get; > + rte_dmadev_is_valid_dev; > + rte_dmadev_selftest; > + rte_dmadev_start; > + rte_dmadev_stats_get; > + rte_dmadev_stats_reset; > + rte_dmadev_stop; > + rte_dmadev_submit; > + rte_dmadev_vchan_release; > + rte_dmadev_vchan_setup; > + > + local: *; > +}; > + > +INTERNAL { > + global: > + > + rte_dmadevices; > + rte_dmadev_get_device_by_name; > + rte_dmadev_pmd_allocate; > + rte_dmadev_pmd_release; > + > + local: *; > +}; > + > diff --git a/lib/meson.build b/lib/meson.build > index 1673ca4..68d239f 100644 > --- a/lib/meson.build > +++ b/lib/meson.build > @@ -60,6 +60,7 @@ libraries = [ > 'bpf', > 'graph', > 'node', > + 'dmadev', > ] > > if is_windows > -- > 2.8.1 >