DPDK patches and discussions
 help / color / mirror / Atom feed
From: Jerin Jacob <jerinjacobk@gmail.com>
To: Vamsi Attunuru <vattunuru@marvell.com>
Cc: dev@dpdk.org, jerinj@marvell.com, sedara@marvell.com
Subject: Re: [PATCH] net/octeon_ep: support backward compatibility
Date: Fri, 23 Jun 2023 08:25:41 +0530	[thread overview]
Message-ID: <CALBAE1NAkA5OthcZQJ9BRsiUFb6pGe+fcS39nGHNDA2300KLfQ@mail.gmail.com> (raw)
In-Reply-To: <20230622111807.2679750-1-vattunuru@marvell.com>

On Thu, Jun 22, 2023 at 4:48 PM Vamsi Attunuru <vattunuru@marvell.com> wrote:
>
> From: Sathesh Edara <sedara@marvell.com>
>
> Add backward compatibility support between VF
> and PF mailbox messages.
>
> Signed-off-by: Sathesh Edara <sedara@marvell.com>
> Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>


Applied to dpdk-next-net-mrvl/for-next-net. Thanks

> ---
>  drivers/net/octeon_ep/otx_ep_common.h |  3 +++
>  drivers/net/octeon_ep/otx_ep_ethdev.c |  6 +++++
>  drivers/net/octeon_ep/otx_ep_mbox.c   | 38 ++++++++++++++++++++++-----
>  drivers/net/octeon_ep/otx_ep_mbox.h   | 11 ++++++--
>  4 files changed, 50 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/net/octeon_ep/otx_ep_common.h b/drivers/net/octeon_ep/otx_ep_common.h
> index 42aa065a3a..c150cbe619 100644
> --- a/drivers/net/octeon_ep/otx_ep_common.h
> +++ b/drivers/net/octeon_ep/otx_ep_common.h
> @@ -538,6 +538,9 @@ struct otx_ep_device {
>
>         /* Mailbox receive message length */
>         int32_t mbox_rcv_message_len;
> +
> +       /* Negotiated Mbox version */
> +       uint32_t mbox_neg_ver;
>  };
>
>  int otx_ep_setup_iqs(struct otx_ep_device *otx_ep, uint32_t iq_no,
> diff --git a/drivers/net/octeon_ep/otx_ep_ethdev.c b/drivers/net/octeon_ep/otx_ep_ethdev.c
> index a9868909f8..57b965ad06 100644
> --- a/drivers/net/octeon_ep/otx_ep_ethdev.c
> +++ b/drivers/net/octeon_ep/otx_ep_ethdev.c
> @@ -666,6 +666,12 @@ otx_ep_eth_dev_init(struct rte_eth_dev *eth_dev)
>         otx_epvf->port_id = eth_dev->data->port_id;
>         eth_dev->dev_ops = &otx_ep_eth_dev_ops;
>         rte_spinlock_init(&otx_epvf->mbox_lock);
> +
> +       /*
> +        * Initialize negotiated Mbox version to base version of VF Mbox
> +        * This will address working legacy PF with latest VF.
> +        */
> +       otx_epvf->mbox_neg_ver = OTX_EP_MBOX_VERSION_V1;
>         eth_dev->data->mac_addrs = rte_zmalloc("otx_ep", RTE_ETHER_ADDR_LEN, 0);
>         if (eth_dev->data->mac_addrs == NULL) {
>                 otx_ep_err("MAC addresses memory allocation failed\n");
> diff --git a/drivers/net/octeon_ep/otx_ep_mbox.c b/drivers/net/octeon_ep/otx_ep_mbox.c
> index 1ad36e14c8..4118645dc7 100644
> --- a/drivers/net/octeon_ep/otx_ep_mbox.c
> +++ b/drivers/net/octeon_ep/otx_ep_mbox.c
> @@ -12,6 +12,14 @@
>  #include "cnxk_ep_vf.h"
>  #include "otx_ep_mbox.h"
>
> +/*
> + * When a new command is implemented, the below table should be updated
> + * with new command and it's version info.
> + */
> +static uint32_t otx_ep_cmd_versions[OTX_EP_MBOX_CMD_MAX] = {
> +       [0 ... OTX_EP_MBOX_CMD_DEV_REMOVE] = OTX_EP_MBOX_VERSION_V1
> +};
> +
>  static int
>  __otx_ep_send_mbox_cmd(struct otx_ep_device *otx_ep,
>                        union otx_ep_mbox_word cmd,
> @@ -56,6 +64,12 @@ otx_ep_send_mbox_cmd(struct otx_ep_device *otx_ep,
>         int ret;
>
>         rte_spinlock_lock(&otx_ep->mbox_lock);
> +       if (otx_ep_cmd_versions[cmd.s.opcode] > otx_ep->mbox_neg_ver) {
> +               otx_ep_dbg("CMD:%d not supported in Version:%d\n", cmd.s.opcode,
> +                           otx_ep->mbox_neg_ver);
> +               rte_spinlock_unlock(&otx_ep->mbox_lock);
> +               return -EOPNOTSUPP;
> +       }
>         ret = __otx_ep_send_mbox_cmd(otx_ep, cmd, rsp);
>         rte_spinlock_unlock(&otx_ep->mbox_lock);
>         return ret;
> @@ -284,15 +298,27 @@ int otx_ep_mbox_version_check(struct rte_eth_dev *eth_dev)
>
>         cmd.u64 = 0;
>         cmd.s_version.opcode = OTX_EP_MBOX_CMD_VERSION;
> -       cmd.s_version.version = OTX_EP_MBOX_VERSION;
> +       cmd.s_version.version = OTX_EP_MBOX_VERSION_CURRENT;
>         ret = otx_ep_send_mbox_cmd(otx_ep, cmd, &rsp);
> -       if (!ret)
> -               return 0;
> -       if (ret == OTX_EP_MBOX_CMD_STATUS_NACK) {
> -               otx_ep_err("VF Mbox version:%u is not compatible with PF\n",
> +
> +       /*
> +        * VF receives NACK or version info as zero
> +        * only if PF driver running old version of Mailbox
> +        * In this case VF mailbox version fallbacks to base
> +        * mailbox vesrion OTX_EP_MBOX_VERSION_V1.
> +        * Default VF mbox_neg_ver is set to OTX_EP_MBOX_VERSION_V1
> +        * during initialization of PMD driver.
> +        */
> +       if (ret == OTX_EP_MBOX_CMD_STATUS_NACK || rsp.s_version.version == 0) {
> +               otx_ep_dbg("VF Mbox version fallback to base version from:%u\n",
>                         (uint32_t)cmd.s_version.version);
> +               return 0;
>         }
> -       return ret;
> +       otx_ep->mbox_neg_ver = (uint32_t)rsp.s_version.version;
> +       otx_ep_dbg("VF Mbox version:%u Negotiated VF version with PF:%u\n",
> +                   (uint32_t)cmd.s_version.version,
> +                   (uint32_t)rsp.s_version.version);
> +       return 0;
>  }
>
>  int otx_ep_mbox_send_dev_exit(struct rte_eth_dev *eth_dev)
> diff --git a/drivers/net/octeon_ep/otx_ep_mbox.h b/drivers/net/octeon_ep/otx_ep_mbox.h
> index 9df3c53edd..a3fc15cca7 100644
> --- a/drivers/net/octeon_ep/otx_ep_mbox.h
> +++ b/drivers/net/octeon_ep/otx_ep_mbox.h
> @@ -5,8 +5,15 @@
>  #ifndef _OTX_EP_MBOX_H_
>  #define _OTX_EP_MBOX_H_
>
> +/*
> + * When a new command is implemented, VF Mbox version should be bumped.
> + */
> +enum octep_pfvf_mbox_version {
> +       OTX_EP_MBOX_VERSION_V0,
> +       OTX_EP_MBOX_VERSION_V1,
> +};
>
> -#define OTX_EP_MBOX_VERSION        1
> +#define OTX_EP_MBOX_VERSION_CURRENT OTX_EP_MBOX_VERSION_V1
>
>  enum otx_ep_mbox_opcode {
>         OTX_EP_MBOX_CMD_VERSION,
> @@ -20,7 +27,7 @@ enum otx_ep_mbox_opcode {
>         OTX_EP_MBOX_CMD_GET_LINK_STATUS,
>         OTX_EP_MBOX_CMD_GET_MTU,
>         OTX_EP_MBOX_CMD_DEV_REMOVE,
> -       OTX_EP_MBOX_CMD_LAST,
> +       OTX_EP_MBOX_CMD_MAX,
>  };
>
>  enum otx_ep_mbox_word_type {
> --
> 2.25.1
>

      reply	other threads:[~2023-06-23  2:56 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-22 11:18 Vamsi Attunuru
2023-06-23  2:55 ` Jerin Jacob [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CALBAE1NAkA5OthcZQJ9BRsiUFb6pGe+fcS39nGHNDA2300KLfQ@mail.gmail.com \
    --to=jerinjacobk@gmail.com \
    --cc=dev@dpdk.org \
    --cc=jerinj@marvell.com \
    --cc=sedara@marvell.com \
    --cc=vattunuru@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).