DPDK patches and discussions
 help / color / mirror / Atom feed
From: Jerin Jacob <jerinjacobk@gmail.com>
To: Ganapati Kundapura <ganapati.kundapura@intel.com>
Cc: dpdk-dev <dev@dpdk.org>,
	"Jayatheerthan, Jay" <jay.jayatheerthan@intel.com>,
	Jerin Jacob <jerinj@marvell.com>
Subject: Re: [dpdk-dev] [PATCH v3] eventdev: add Rx timestamp in mbuf using mbuf dynamic field
Date: Wed, 29 Sep 2021 11:21:53 +0530	[thread overview]
Message-ID: <CALBAE1OihiT_rNZ2_Fj+3n2MGantuQXcOQ1_t-UG4mL0-=pLiw@mail.gmail.com> (raw)
In-Reply-To: <20210928163848.1511459-1-ganapati.kundapura@intel.com>

On Tue, Sep 28, 2021 at 10:09 PM Ganapati Kundapura
<ganapati.kundapura@intel.com> wrote:
>
> Add support to register timestamp dynamic field in mbuf.
>
> Update the timestamp in mbuf for each packet before enqueuing
> to event device if the timestamp is not already set.
>
> Adding the timestamp in Rx adapter avoids additional latency
> due to the event device.
>
> Acked-by: Jerin Jacob <jerinj@marvell.com>
>
> Signed-off-by: Ganapati Kundapura <ganapati.kundapura@intel.com>


Changed the subject as eventdev/rx_adapter: use Rx timestamp as
dynamic mbuf field

Applied to dpdk-next-net-eventdev/for-main. Thanks



>
> ---
> Depends-on: patch-97549(make Rx-adapter enqueue buffer as circular buffer)
>
> v3:
> * updated timestamp variables to static
> * corrected wrong headline case: rx --> Rx
> * corrected headline too long git log issue
>
> v2:
> * Removed rte_ prefix from the internal function
>
> v1:
> * Add support to register timestamp dynamic field in mbuf
> ---
>
> diff --git a/lib/eventdev/rte_event_eth_rx_adapter.c b/lib/eventdev/rte_event_eth_rx_adapter.c
> index f2dc695..e7595b2 100644
> --- a/lib/eventdev/rte_event_eth_rx_adapter.c
> +++ b/lib/eventdev/rte_event_eth_rx_adapter.c
> @@ -17,6 +17,7 @@
>  #include <rte_service_component.h>
>  #include <rte_thash.h>
>  #include <rte_interrupts.h>
> +#include <rte_mbuf_dyn.h>
>
>  #include "rte_eventdev.h"
>  #include "eventdev_pmd.h"
> @@ -240,6 +241,17 @@ struct eth_rx_queue_info {
>
>  static struct rte_event_eth_rx_adapter **event_eth_rx_adapter;
>
> +/* Enable dynamic timestamp field in mbuf */
> +static uint64_t event_eth_rx_timestamp_dynflag;
> +static int event_eth_rx_timestamp_dynfield_offset = -1;
> +
> +static inline rte_mbuf_timestamp_t *
> +rxa_timestamp_dynfield(struct rte_mbuf *mbuf)
> +{
> +       return RTE_MBUF_DYNFIELD(mbuf,
> +               event_eth_rx_timestamp_dynfield_offset, rte_mbuf_timestamp_t *);
> +}
> +
>  static inline int
>  rxa_validate_id(uint8_t id)
>  {
> @@ -890,8 +902,18 @@ rxa_buffer_mbufs(struct rte_event_eth_rx_adapter *rx_adapter,
>         int do_rss;
>         uint16_t nb_cb;
>         uint16_t dropped;
> +       uint64_t ts, ts_mask;
>
>         if (!eth_rx_queue_info->ena_vector) {
> +               ts = m->ol_flags & event_eth_rx_timestamp_dynflag ?
> +                                               0 : rte_get_tsc_cycles();
> +
> +               /* 0xffff ffff ffff ffff if PKT_RX_TIMESTAMP is set,
> +                * otherwise 0
> +                */
> +               ts_mask = (uint64_t)(!(m->ol_flags &
> +                                      event_eth_rx_timestamp_dynflag)) - 1ULL;
> +
>                 /* 0xffff ffff if PKT_RX_RSS_HASH is set, otherwise 0 */
>                 rss_mask = ~(((m->ol_flags & PKT_RX_RSS_HASH) != 0) - 1);
>                 do_rss = !rss_mask && !eth_rx_queue_info->flow_id_mask;
> @@ -899,6 +921,9 @@ rxa_buffer_mbufs(struct rte_event_eth_rx_adapter *rx_adapter,
>                         struct rte_event *ev;
>
>                         m = mbufs[i];
> +                       *rxa_timestamp_dynfield(m) = ts |
> +                                       (*rxa_timestamp_dynfield(m) & ts_mask);
> +
>                         ev = &buf->events[new_tail];
>
>                         rss = do_rss ? rxa_do_softrss(m, rx_adapter->rss_key_be)
> @@ -2238,6 +2263,14 @@ rte_event_eth_rx_adapter_create_ext(uint8_t id, uint8_t dev_id,
>         event_eth_rx_adapter[id] = rx_adapter;
>         if (conf_cb == rxa_default_conf_cb)
>                 rx_adapter->default_cb_arg = 1;
> +
> +       if (rte_mbuf_dyn_rx_timestamp_register(
> +                       &event_eth_rx_timestamp_dynfield_offset,
> +                       &event_eth_rx_timestamp_dynflag) != 0) {
> +               RTE_EDEV_LOG_ERR("Error registering timestamp field in mbuf\n");
> +               return -rte_errno;
> +       }
> +
>         rte_eventdev_trace_eth_rx_adapter_create(id, dev_id, conf_cb,
>                 conf_arg);
>         return 0;
> --
> 2.6.4
>

      reply	other threads:[~2021-09-29  5:52 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-14  7:14 [dpdk-dev] [PATCH v1] eventdev: update rx " Ganapati Kundapura
2021-09-16  4:50 ` Jerin Jacob
2021-09-16  8:33   ` Kundapura, Ganapati
2021-09-16  8:37     ` Jerin Jacob
2021-09-16  9:11       ` Kundapura, Ganapati
2021-09-16  9:23         ` Jerin Jacob
2021-09-16  7:21 ` [dpdk-dev] [PATCH v2] " Ganapati Kundapura
2021-09-16  7:37   ` Jayatheerthan, Jay
2021-09-16  9:15 ` Ganapati Kundapura
2021-09-28 14:24   ` Jerin Jacob
2021-09-28 15:47     ` Kundapura, Ganapati
2021-09-28 16:38   ` [dpdk-dev] [PATCH v3] eventdev: add Rx " Ganapati Kundapura
2021-09-29  5:51     ` Jerin Jacob [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CALBAE1OihiT_rNZ2_Fj+3n2MGantuQXcOQ1_t-UG4mL0-=pLiw@mail.gmail.com' \
    --to=jerinjacobk@gmail.com \
    --cc=dev@dpdk.org \
    --cc=ganapati.kundapura@intel.com \
    --cc=jay.jayatheerthan@intel.com \
    --cc=jerinj@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).