DPDK patches and discussions
 help / color / mirror / Atom feed
From: Jerin Jacob <jerinjacobk@gmail.com>
To: Harman Kalra <hkalra@marvell.com>
Cc: Sunil Kumar Kori <skori@marvell.com>,
	Jerin Jacob Kollanukkaran <jerinj@marvell.com>,
	 John McNamara <john.mcnamara@intel.com>,
	Marko Kovacevic <marko.kovacevic@intel.com>,
	"dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH] net/octeontx: add unicast MAC filter
Date: Tue, 14 Jan 2020 13:15:27 +0530	[thread overview]
Message-ID: <CALBAE1PAc-V1rGXhRqVMcJhNGaRu6MAv2xzYjbBo33AnxDiU2Q@mail.gmail.com> (raw)
In-Reply-To: <20200114074241.GA160869@outlook.office365.com>

On Tue, Jan 14, 2020 at 1:13 PM Harman Kalra <hkalra@marvell.com> wrote:
>
> On Mon, Jan 13, 2020 at 11:46:44AM +0530, Sunil Kumar Kori wrote:
> > At BGX, DMAC filter table can be enabled to allow defined hosts.
> > Patch implements 'mac_addr_add' and 'mac_addr_remove' ops to
> > add/remove MAC filters which uses BGX DMAC filter table.
> >
> > Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
>
> Acked-by: Harman Kalra <hkalra@marvell.com>

Applied to dpdk-next-net-mrvl/master. Thanks



> > ---
> >  doc/guides/nics/features/octeontx.ini    |  2 +-
> >  drivers/net/octeontx/base/octeontx_bgx.c | 55 ++++++++++++++++++++++++
> >  drivers/net/octeontx/base/octeontx_bgx.h |  6 +++
> >  drivers/net/octeontx/octeontx_ethdev.c   | 50 +++++++++++++++++++--
> >  4 files changed, 109 insertions(+), 4 deletions(-)
> >
> > diff --git a/doc/guides/nics/features/octeontx.ini b/doc/guides/nics/features/octeontx.ini
> > index c92d5aa07..323befe59 100644
> > --- a/doc/guides/nics/features/octeontx.ini
> > +++ b/doc/guides/nics/features/octeontx.ini
> > @@ -10,7 +10,7 @@ Lock-free Tx queue   = Y
> >  Queue start/stop     = P
> >  Jumbo frame          = Y
> >  Promiscuous mode     = Y
> > -Unicast MAC filter   = P
> > +Unicast MAC filter   = Y
> >  CRC offload          = Y
> >  Packet type parsing  = Y
> >  Basic stats          = Y
> > diff --git a/drivers/net/octeontx/base/octeontx_bgx.c b/drivers/net/octeontx/base/octeontx_bgx.c
> > index 0e2388264..e70255b11 100644
> > --- a/drivers/net/octeontx/base/octeontx_bgx.c
> > +++ b/drivers/net/octeontx/base/octeontx_bgx.c
> > @@ -243,3 +243,58 @@ octeontx_bgx_port_mac_set(int port, uint8_t *mac_addr)
> >
> >       return res;
> >  }
> > +
> > +int
> > +octeontx_bgx_port_mac_add(int port, uint8_t *mac_addr)
> > +{
> > +     struct octeontx_mbox_hdr hdr;
> > +     int resp = 0;
> > +     int len = 6;
> > +     int res = 0;
> > +
> > +     hdr.coproc = OCTEONTX_BGX_COPROC;
> > +     hdr.msg = MBOX_BGX_PORT_ADD_MACADDR;
> > +     hdr.vfid = port;
> > +
> > +     res = octeontx_mbox_send(&hdr, mac_addr, len, &resp, sizeof(int));
> > +     if (res < 0)
> > +             return -EACCES;
> > +
> > +     return res;
> > +}
> > +
> > +int
> > +octeontx_bgx_port_mac_del(int port, uint32_t index)
> > +{
> > +     struct octeontx_mbox_hdr hdr;
> > +     int len = sizeof(uint32_t);
> > +     int res = 0;
> > +
> > +     hdr.coproc = OCTEONTX_BGX_COPROC;
> > +     hdr.msg = MBOX_BGX_PORT_DEL_MACADDR;
> > +     hdr.vfid = port;
> > +
> > +     res = octeontx_mbox_send(&hdr, &index, len, NULL, 0);
> > +     if (res < 0)
> > +             return -EACCES;
> > +
> > +     return res;
> > +}
> > +
> > +int
> > +octeontx_bgx_port_mac_entries_get(int port)
> > +{
> > +     struct octeontx_mbox_hdr hdr;
> > +     int resp = 6;
> > +     int res = 0;
> > +
> > +     hdr.coproc = OCTEONTX_BGX_COPROC;
> > +     hdr.msg = MBOX_BGX_PORT_GET_MACADDR_ENTRIES;
> > +     hdr.vfid = port;
> > +
> > +     res = octeontx_mbox_send(&hdr, NULL, 0, &resp, sizeof(int));
> > +     if (res < 0)
> > +             return -EACCES;
> > +
> > +     return resp;
> > +}
> > diff --git a/drivers/net/octeontx/base/octeontx_bgx.h b/drivers/net/octeontx/base/octeontx_bgx.h
> > index a9bbaf2c3..caaff179c 100644
> > --- a/drivers/net/octeontx/base/octeontx_bgx.h
> > +++ b/drivers/net/octeontx/base/octeontx_bgx.h
> > @@ -28,6 +28,9 @@
> >  #define MBOX_BGX_PORT_SET_BCAST         12
> >  #define MBOX_BGX_PORT_SET_MCAST         13
> >  #define MBOX_BGX_PORT_SET_MTU                14
> > +#define MBOX_BGX_PORT_ADD_MACADDR    15
> > +#define MBOX_BGX_PORT_DEL_MACADDR    16
> > +#define MBOX_BGX_PORT_GET_MACADDR_ENTRIES 17
> >
> >  /* BGX port configuration parameters: */
> >  typedef struct octeontx_mbox_bgx_port_conf {
> > @@ -120,6 +123,9 @@ int octeontx_bgx_port_stats_clr(int port);
> >  int octeontx_bgx_port_link_status(int port);
> >  int octeontx_bgx_port_promisc_set(int port, int en);
> >  int octeontx_bgx_port_mac_set(int port, uint8_t *mac_addr);
> > +int octeontx_bgx_port_mac_add(int port, uint8_t *mac_addr);
> > +int octeontx_bgx_port_mac_del(int port, uint32_t index);
> > +int octeontx_bgx_port_mac_entries_get(int port);
> >
> >  #endif       /* __OCTEONTX_BGX_H__ */
> >
> > diff --git a/drivers/net/octeontx/octeontx_ethdev.c b/drivers/net/octeontx/octeontx_ethdev.c
> > index 679803dd4..e23162d8a 100644
> > --- a/drivers/net/octeontx/octeontx_ethdev.c
> > +++ b/drivers/net/octeontx/octeontx_ethdev.c
> > @@ -558,6 +558,37 @@ octeontx_dev_stats_reset(struct rte_eth_dev *dev)
> >       return octeontx_port_stats_clr(nic);
> >  }
> >
> > +static void
> > +octeontx_dev_mac_addr_del(struct rte_eth_dev *dev, uint32_t index)
> > +{
> > +     struct octeontx_nic *nic = octeontx_pmd_priv(dev);
> > +     int ret;
> > +
> > +     ret = octeontx_bgx_port_mac_del(nic->port_id, index);
> > +     if (ret != 0)
> > +             octeontx_log_err("failed to del MAC address filter on port %d",
> > +                              nic->port_id);
> > +}
> > +
> > +static int
> > +octeontx_dev_mac_addr_add(struct rte_eth_dev *dev,
> > +                       struct rte_ether_addr *mac_addr,
> > +                       __rte_unused uint32_t index,
> > +                       __rte_unused uint32_t vmdq)
> > +{
> > +     struct octeontx_nic *nic = octeontx_pmd_priv(dev);
> > +     int ret;
> > +
> > +     ret = octeontx_bgx_port_mac_add(nic->port_id, mac_addr->addr_bytes);
> > +     if (ret < 0) {
> > +             octeontx_log_err("failed to add MAC address filter on port %d",
> > +                              nic->port_id);
> > +             return ret;
> > +     }
> > +
> > +     return 0;
> > +}
> > +
> >  static int
> >  octeontx_dev_default_mac_addr_set(struct rte_eth_dev *dev,
> >                                       struct rte_ether_addr *addr)
> > @@ -577,7 +608,7 @@ static int
> >  octeontx_dev_info(struct rte_eth_dev *dev,
> >               struct rte_eth_dev_info *dev_info)
> >  {
> > -     RTE_SET_USED(dev);
> > +     struct octeontx_nic *nic = octeontx_pmd_priv(dev);
> >
> >       /* Autonegotiation may be disabled */
> >       dev_info->speed_capa = ETH_LINK_SPEED_FIXED;
> > @@ -585,7 +616,8 @@ octeontx_dev_info(struct rte_eth_dev *dev,
> >                       ETH_LINK_SPEED_1G | ETH_LINK_SPEED_10G |
> >                       ETH_LINK_SPEED_40G;
> >
> > -     dev_info->max_mac_addrs = 1;
> > +     dev_info->max_mac_addrs =
> > +                             octeontx_bgx_port_mac_entries_get(nic->port_id);
> >       dev_info->max_rx_pktlen = PKI_MAX_PKTLEN;
> >       dev_info->max_rx_queues = 1;
> >       dev_info->max_tx_queues = PKO_MAX_NUM_DQ;
> > @@ -986,6 +1018,8 @@ static const struct eth_dev_ops octeontx_dev_ops = {
> >       .link_update             = octeontx_dev_link_update,
> >       .stats_get               = octeontx_dev_stats_get,
> >       .stats_reset             = octeontx_dev_stats_reset,
> > +     .mac_addr_remove         = octeontx_dev_mac_addr_del,
> > +     .mac_addr_add            = octeontx_dev_mac_addr_add,
> >       .mac_addr_set            = octeontx_dev_default_mac_addr_set,
> >       .tx_queue_start          = octeontx_dev_tx_queue_start,
> >       .tx_queue_stop           = octeontx_dev_tx_queue_stop,
> > @@ -1009,6 +1043,7 @@ octeontx_create(struct rte_vdev_device *dev, int port, uint8_t evdev,
> >       struct rte_eth_dev *eth_dev = NULL;
> >       struct rte_eth_dev_data *data;
> >       const char *name = rte_vdev_device_name(dev);
> > +     int max_entries;
> >
> >       PMD_INIT_FUNC_TRACE();
> >
> > @@ -1082,7 +1117,16 @@ octeontx_create(struct rte_vdev_device *dev, int port, uint8_t evdev,
> >       data->all_multicast = 0;
> >       data->scattered_rx = 0;
> >
> > -     data->mac_addrs = rte_zmalloc_socket(octtx_name, RTE_ETHER_ADDR_LEN, 0,
> > +     /* Get maximum number of supported MAC entries */
> > +     max_entries = octeontx_bgx_port_mac_entries_get(nic->port_id);
> > +     if (max_entries < 0) {
> > +             octeontx_log_err("Failed to get max entries for mac addr");
> > +             res = -ENOTSUP;
> > +             goto err;
> > +     }
> > +
> > +     data->mac_addrs = rte_zmalloc_socket(octtx_name, max_entries *
> > +                                          RTE_ETHER_ADDR_LEN, 0,
> >                                                       socket_id);
> >       if (data->mac_addrs == NULL) {
> >               octeontx_log_err("failed to allocate memory for mac_addrs");
> > --
> > 2.17.1
> >

      reply	other threads:[~2020-01-14  7:45 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-13  6:16 Sunil Kumar Kori
2020-01-14  7:43 ` Harman Kalra
2020-01-14  7:45   ` Jerin Jacob [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CALBAE1PAc-V1rGXhRqVMcJhNGaRu6MAv2xzYjbBo33AnxDiU2Q@mail.gmail.com \
    --to=jerinjacobk@gmail.com \
    --cc=dev@dpdk.org \
    --cc=hkalra@marvell.com \
    --cc=jerinj@marvell.com \
    --cc=john.mcnamara@intel.com \
    --cc=marko.kovacevic@intel.com \
    --cc=skori@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).