From: Jerin Jacob <jerinjacobk@gmail.com>
To: Rasesh Mody <rmody@marvell.com>
Cc: Jerin Jacob <jerinj@marvell.com>, Souvik Dey <sodey@rbbn.com>,
dpdk-dev <dev@dpdk.org>,
Stephen Hemminger <stephen@networkplumber.org>,
Ferruh Yigit <ferruh.yigit@intel.com>,
Thomas Monjalon <thomas@monjalon.net>
Subject: Re: [dpdk-dev] [PATCH v2] net/bnx2x: add multicast MAC address filtering
Date: Tue, 14 Apr 2020 18:53:31 +0530 [thread overview]
Message-ID: <CALBAE1PditSB=fONkfmQAnw0dcuwkcDqn2wbREL77o47JPCNyA@mail.gmail.com> (raw)
In-Reply-To: <20200413230902.23421-1-rmody@marvell.com>
On Tue, Apr 14, 2020 at 4:39 AM Rasesh Mody <rmody@marvell.com> wrote:
>
> From: Souvik Dey <sodey@rbbn.com>
>
> Add support the set_mc_addr_list device operation in the bnx2xvf PMD.
>
> The configured addresses are stored in the device private area, so
> they can be flushed before adding new ones.
> Without this v6 multicast packets were properly forwarded to the
> Guest VF.
>
> v2:
> * Fixed the Wrong tag issue with check-git-log.sh
>
> Signed-off-by: Souvik Dey <sodey@rbbn.com>
> Acked-by: Rasesh Mody <rmody@marvell.com>
Applied to dpdk-next-net-mrvl/master. Thanks
> ---
> drivers/net/bnx2x/bnx2x.h | 4 +++
> drivers/net/bnx2x/bnx2x_ethdev.c | 35 ++++++++++++++++++-
> drivers/net/bnx2x/bnx2x_vfpf.c | 58 ++++++++++++++++++++++++++++++++
> drivers/net/bnx2x/bnx2x_vfpf.h | 3 ++
> 4 files changed, 99 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h
> index 1dbc98197d..3cadb5d824 100644
> --- a/drivers/net/bnx2x/bnx2x.h
> +++ b/drivers/net/bnx2x/bnx2x.h
> @@ -1376,6 +1376,10 @@ struct bnx2x_softc {
> uint8_t prio_to_cos[BNX2X_MAX_PRIORITY];
>
> int panic;
> + /* Array of Multicast addrs */
> + struct rte_ether_addr mc_addrs[VF_MAX_MULTICAST_PER_VF];
> + /* Multicast mac addresses number */
> + uint16_t mc_addrs_num;
> }; /* struct bnx2x_softc */
>
> /* IOCTL sub-commands for edebug and firmware upgrade */
> diff --git a/drivers/net/bnx2x/bnx2x_ethdev.c b/drivers/net/bnx2x/bnx2x_ethdev.c
> index 7864b5b80a..30588b152f 100644
> --- a/drivers/net/bnx2x/bnx2x_ethdev.c
> +++ b/drivers/net/bnx2x/bnx2x_ethdev.c
> @@ -240,6 +240,9 @@ bnx2x_dev_start(struct rte_eth_dev *dev)
> PMD_DRV_LOG(ERR, sc, "rte_intr_enable failed");
> }
>
> + /* Configure the previously stored Multicast address list */
> + if (IS_VF(sc))
> + bnx2x_vfpf_set_mcast(sc, sc->mc_addrs, sc->mc_addrs_num);
> bnx2x_dev_rxtx_init(dev);
>
> bnx2x_print_device_info(sc);
> @@ -265,7 +268,12 @@ bnx2x_dev_stop(struct rte_eth_dev *dev)
> /* stop the periodic callout */
> bnx2x_periodic_stop(dev);
> }
> -
> + /* Remove the configured Multicast list
> + * Sending NULL for the list of address and the
> + * Number is set to 0 denoting DEL_CMD
> + */
> + if (IS_VF(sc))
> + bnx2x_vfpf_set_mcast(sc, NULL, 0);
> ret = bnx2x_nic_unload(sc, UNLOAD_NORMAL, FALSE);
> if (ret) {
> PMD_DRV_LOG(DEBUG, sc, "bnx2x_nic_unload failed (%d)", ret);
> @@ -348,6 +356,30 @@ bnx2x_dev_allmulticast_disable(struct rte_eth_dev *dev)
> return 0;
> }
>
> +static int
> +bnx2x_dev_set_mc_addr_list(struct rte_eth_dev *dev,
> + struct rte_ether_addr *mc_addrs, uint32_t mc_addrs_num)
> +{
> + struct bnx2x_softc *sc = dev->data->dev_private;
> + int err;
> + PMD_INIT_FUNC_TRACE(sc);
> + /* flush previous addresses */
> + err = bnx2x_vfpf_set_mcast(sc, NULL, 0);
> + if (err)
> + return err;
> + sc->mc_addrs_num = 0;
> +
> + /* Add new ones */
> + err = bnx2x_vfpf_set_mcast(sc, mc_addrs, mc_addrs_num);
> + if (err)
> + return err;
> +
> + sc->mc_addrs_num = mc_addrs_num;
> + memcpy(sc->mc_addrs, mc_addrs, mc_addrs_num * sizeof(*mc_addrs));
> +
> + return 0;
> +}
> +
> static int
> bnx2x_dev_link_update(struct rte_eth_dev *dev, __rte_unused int wait_to_complete)
> {
> @@ -562,6 +594,7 @@ static const struct eth_dev_ops bnx2xvf_eth_dev_ops = {
> .promiscuous_disable = bnx2x_promisc_disable,
> .allmulticast_enable = bnx2x_dev_allmulticast_enable,
> .allmulticast_disable = bnx2x_dev_allmulticast_disable,
> + .set_mc_addr_list = bnx2x_dev_set_mc_addr_list,
> .link_update = bnx2xvf_dev_link_update,
> .stats_get = bnx2x_dev_stats_get,
> .xstats_get = bnx2x_dev_xstats_get,
> diff --git a/drivers/net/bnx2x/bnx2x_vfpf.c b/drivers/net/bnx2x/bnx2x_vfpf.c
> index 8f7559c675..097ccfee19 100644
> --- a/drivers/net/bnx2x/bnx2x_vfpf.c
> +++ b/drivers/net/bnx2x/bnx2x_vfpf.c
> @@ -703,3 +703,61 @@ bnx2x_vf_set_rx_mode(struct bnx2x_softc *sc)
>
> return rc;
> }
> +
> +int
> +bnx2x_vfpf_set_mcast(struct bnx2x_softc *sc,
> + struct rte_ether_addr *mc_addrs,
> + uint32_t mc_addrs_num)
> +{
> + struct vf_set_q_filters_tlv *query;
> + struct vf_common_reply_tlv *reply =
> + &sc->vf2pf_mbox->resp.common_reply;
> + int rc = 0;
> + uint32_t i = 0;
> + query = &sc->vf2pf_mbox->query[0].set_q_filters;
> + bnx2x_vf_prep(sc, &query->first_tlv, BNX2X_VF_TLV_SET_Q_FILTERS,
> + sizeof(*query));
> + /* We support PFVF_MAX_MULTICAST_PER_VF mcast addresses tops */
> + if (mc_addrs_num > VF_MAX_MULTICAST_PER_VF) {
> + PMD_DRV_LOG(ERR, sc,
> + "VF supports not more than %d multicast MAC addresses",
> + VF_MAX_MULTICAST_PER_VF);
> +
> + rc = -EINVAL;
> + goto out;
> + }
> +
> + for (i = 0; i < mc_addrs_num; i++) {
> + PMD_DRV_LOG(DEBUG, sc, "Adding mcast MAC:%x:%x:%x:%x:%x:%x",
> + mc_addrs[i].addr_bytes[0],
> + mc_addrs[i].addr_bytes[1],
> + mc_addrs[i].addr_bytes[2],
> + mc_addrs[i].addr_bytes[3],
> + mc_addrs[i].addr_bytes[4],
> + mc_addrs[i].addr_bytes[5]);
> + memcpy(query->multicast[i], mc_addrs[i].addr_bytes, ETH_ALEN);
> + }
> +
> + query->vf_qid = 0;
> + query->flags = BNX2X_VF_MULTICAST_CHANGED;
> + query->multicast_cnt = i;
> +
> + /* add list termination tlv */
> + bnx2x_add_tlv(sc, query, query->first_tlv.tl.length,
> + BNX2X_VF_TLV_LIST_END,
> + sizeof(struct channel_list_end_tlv));
> + rc = bnx2x_do_req4pf(sc, sc->vf2pf_mbox_mapping.paddr);
> + if (rc)
> + goto out;
> +
> + if (reply->status != BNX2X_VF_STATUS_SUCCESS) {
> + PMD_DRV_LOG(ERR, sc, "Set Rx mode/multicast failed: %d",
> + reply->status);
> + rc = -EINVAL;
> + }
> +
> +out:
> + bnx2x_vf_finalize(sc, &query->first_tlv);
> +
> + return rc;
> +}
> diff --git a/drivers/net/bnx2x/bnx2x_vfpf.h b/drivers/net/bnx2x/bnx2x_vfpf.h
> index ce0259adf1..7aab8b101a 100644
> --- a/drivers/net/bnx2x/bnx2x_vfpf.h
> +++ b/drivers/net/bnx2x/bnx2x_vfpf.h
> @@ -331,5 +331,8 @@ struct bnx2x_vf_mbx_msg {
> int bnx2x_vf_teardown_queue(struct bnx2x_softc *sc, int qid);
> int bnx2x_vf_set_mac(struct bnx2x_softc *sc, int set);
> int bnx2x_vf_config_rss(struct bnx2x_softc *sc, struct ecore_config_rss_params *params);
> +int bnx2x_vfpf_set_mcast(struct bnx2x_softc *sc,
> + struct rte_ether_addr *mc_addrs,
> + uint32_t mc_addrs_num);
>
> #endif /* BNX2X_VFPF_H */
> --
> 2.18.0
>
prev parent reply other threads:[~2020-04-14 13:23 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-28 20:04 [dpdk-dev] [PATCH] " Dey, Souvik
2020-03-03 23:28 ` [dpdk-dev] [EXT] " Rasesh Mody
2020-04-05 13:09 ` Jerin Jacob
2020-04-06 16:21 ` Dey, Souvik
2020-04-05 21:54 ` [dpdk-dev] " Stephen Hemminger
2020-04-13 23:09 ` [dpdk-dev] [PATCH v2] " Rasesh Mody
2020-04-14 13:23 ` Jerin Jacob [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CALBAE1PditSB=fONkfmQAnw0dcuwkcDqn2wbREL77o47JPCNyA@mail.gmail.com' \
--to=jerinjacobk@gmail.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=jerinj@marvell.com \
--cc=rmody@marvell.com \
--cc=sodey@rbbn.com \
--cc=stephen@networkplumber.org \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).