DPDK patches and discussions
 help / color / mirror / Atom feed
From: Jerin Jacob <jerinjacobk@gmail.com>
To: Rakesh Kudurumalla <rkudurumalla@marvell.com>,
	Ferruh Yigit <ferruh.yigit@intel.com>
Cc: Jerin Jacob <jerinj@marvell.com>,
	Nithin Dabilpuram <ndabilpuram@marvell.com>,
	 Kiran Kumar K <kirankumark@marvell.com>,
	Sunil Kumar Kori <skori@marvell.com>,
	 Satha Rao <skoteshwar@marvell.com>, dpdk-dev <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH 2/2] net/cnxk: integrate bpfcount get MBOX interface
Date: Wed, 3 Nov 2021 20:49:05 +0530	[thread overview]
Message-ID: <CALBAE1PocB+Bo3W-fOHWwp08jC0WPsY2UtbTXZx=gGWDTFELCg@mail.gmail.com> (raw)
In-Reply-To: <20211102055802.1801583-2-rkudurumalla@marvell.com>

On Tue, Nov 2, 2021 at 11:29 AM Rakesh Kudurumalla
<rkudurumalla@marvell.com> wrote:
>
> Bpf count is updated in meter capabilities during device
> initialization using mbox interface
>
> Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>

Updated the commit to:


    net/cnxk: integrate BPF count get mailbox

    Bandwidth profile count is updated in meter capabilities during device
    initialization using mbox interface.

    Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
    Acked-by: Jerin Jacob <jerinj@marvell.com>


Acked-by: Jerin Jacob <jerinj@marvell.com>
Applied to dpdk-next-net-mrvl/for-next-net. Thanks

> ---
>  drivers/net/cnxk/cn10k_rte_flow.c  |  2 +-
>  drivers/net/cnxk/cnxk_ethdev.c     |  4 ++-
>  drivers/net/cnxk/cnxk_ethdev.h     |  1 +
>  drivers/net/cnxk/cnxk_ethdev_mtr.c | 39 ++++++++++++++++++++++++------
>  4 files changed, 37 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/net/cnxk/cn10k_rte_flow.c b/drivers/net/cnxk/cn10k_rte_flow.c
> index dff4c7746c..b830abe63e 100644
> --- a/drivers/net/cnxk/cn10k_rte_flow.c
> +++ b/drivers/net/cnxk/cn10k_rte_flow.c
> @@ -249,7 +249,7 @@ cn10k_flow_destroy(struct rte_eth_dev *eth_dev, struct rte_flow *rte_flow,
>
>         mtr_id = flow->mtr_id;
>         rc = cnxk_flow_destroy(eth_dev, flow, error);
> -       if (!rc) {
> +       if (!rc && mtr_id != ROC_NIX_MTR_ID_INVALID) {
>                 rc = cn10k_mtr_destroy(eth_dev, mtr_id);
>                 if (rc) {
>                         rte_flow_error_set(error, ENXIO,
> diff --git a/drivers/net/cnxk/cnxk_ethdev.c b/drivers/net/cnxk/cnxk_ethdev.c
> index db54468dbc..a7d9978d70 100644
> --- a/drivers/net/cnxk/cnxk_ethdev.c
> +++ b/drivers/net/cnxk/cnxk_ethdev.c
> @@ -730,11 +730,13 @@ nix_free_queue_mem(struct cnxk_eth_dev *dev)
>  static int
>  nix_ingress_policer_setup(struct cnxk_eth_dev *dev)
>  {
> +       struct rte_eth_dev *eth_dev = dev->eth_dev;
> +
>         TAILQ_INIT(&dev->mtr_profiles);
>         TAILQ_INIT(&dev->mtr_policy);
>         TAILQ_INIT(&dev->mtr);
>
> -       return 0;
> +       return nix_mtr_capabilities_init(eth_dev);
>  }
>
>  static int
> diff --git a/drivers/net/cnxk/cnxk_ethdev.h b/drivers/net/cnxk/cnxk_ethdev.h
> index 7e4939f0b9..d7c4b3e319 100644
> --- a/drivers/net/cnxk/cnxk_ethdev.h
> +++ b/drivers/net/cnxk/cnxk_ethdev.h
> @@ -590,6 +590,7 @@ struct cnxk_meter_node *nix_get_mtr(struct rte_eth_dev *eth_dev,
>                                     uint32_t cur_id);
>  int nix_mtr_level_update(struct rte_eth_dev *eth_dev, uint32_t id,
>                          uint32_t level);
> +int nix_mtr_capabilities_init(struct rte_eth_dev *eth_dev);
>  int nix_mtr_configure(struct rte_eth_dev *eth_dev, uint32_t id);
>  int nix_mtr_connect(struct rte_eth_dev *eth_dev, uint32_t id);
>  int nix_mtr_destroy(struct rte_eth_dev *eth_dev, uint32_t id,
> diff --git a/drivers/net/cnxk/cnxk_ethdev_mtr.c b/drivers/net/cnxk/cnxk_ethdev_mtr.c
> index 22c85336d9..39d8563826 100644
> --- a/drivers/net/cnxk/cnxk_ethdev_mtr.c
> +++ b/drivers/net/cnxk/cnxk_ethdev_mtr.c
> @@ -28,7 +28,6 @@ static const enum roc_nix_bpf_level_flag lvl_map[] = {ROC_NIX_BPF_LEVEL_F_LEAF,
>                                                       ROC_NIX_BPF_LEVEL_F_TOP};
>
>  static struct rte_mtr_capabilities mtr_capa = {
> -       .n_max = NIX_MTR_COUNT_MAX,
>         .n_shared_max = NIX_MTR_COUNT_PER_FLOW,
>         /* .identical = , */
>         .shared_identical = true,
> @@ -36,11 +35,7 @@ static struct rte_mtr_capabilities mtr_capa = {
>         .chaining_n_mtrs_per_flow_max = NIX_MTR_COUNT_PER_FLOW,
>         .chaining_use_prev_mtr_color_supported = true,
>         .chaining_use_prev_mtr_color_enforced = true,
> -       .meter_srtcm_rfc2697_n_max = NIX_MTR_COUNT_MAX,
> -       .meter_trtcm_rfc2698_n_max = NIX_MTR_COUNT_MAX,
> -       .meter_trtcm_rfc4115_n_max = NIX_MTR_COUNT_MAX,
>         .meter_rate_max = NIX_BPF_RATE_MAX / 8, /* Bytes per second */
> -       .meter_policy_n_max = NIX_MTR_COUNT_MAX,
>         .color_aware_srtcm_rfc2697_supported = true,
>         .color_aware_trtcm_rfc2698_supported = true,
>         .color_aware_trtcm_rfc4115_supported = true,
> @@ -185,12 +180,33 @@ cnxk_nix_mtr_capabilities_get(struct rte_eth_dev *dev,
>                               struct rte_mtr_capabilities *capa,
>                               struct rte_mtr_error *error)
>  {
> +       struct cnxk_eth_dev *eth_dev = cnxk_eth_pmd_priv(dev);
> +       uint16_t count[ROC_NIX_BPF_LEVEL_MAX] = {0};
> +       uint8_t lvl_mask = ROC_NIX_BPF_LEVEL_F_LEAF | ROC_NIX_BPF_LEVEL_F_MID |
> +                          ROC_NIX_BPF_LEVEL_F_TOP;
> +       struct roc_nix *nix = &eth_dev->nix;
> +       int rc;
> +       int i;
> +
>         RTE_SET_USED(dev);
>
>         if (!capa)
>                 return -rte_mtr_error_set(error, EINVAL,
> -                                         RTE_MTR_ERROR_TYPE_MTR_PARAMS, NULL,
> -                                         "NULL input parameter");
> +                               RTE_MTR_ERROR_TYPE_MTR_PARAMS, NULL,
> +                               "NULL input parameter");
> +
> +       rc = roc_nix_bpf_count_get(nix, lvl_mask, count);
> +       if (rc)
> +               return rc;
> +
> +       for (i = 0; i < ROC_NIX_BPF_LEVEL_MAX; i++)
> +               mtr_capa.n_max += count[i];
> +
> +       mtr_capa.meter_srtcm_rfc2697_n_max = mtr_capa.n_max;
> +       mtr_capa.meter_trtcm_rfc2698_n_max = mtr_capa.n_max;
> +       mtr_capa.meter_trtcm_rfc4115_n_max = mtr_capa.n_max;
> +       mtr_capa.meter_policy_n_max = mtr_capa.n_max;
> +
>         *capa = mtr_capa;
>         return 0;
>  }
> @@ -1339,3 +1355,12 @@ nix_mtr_color_action_validate(struct rte_eth_dev *eth_dev, uint32_t id,
>
>         return 0;
>  }
> +
> +int
> +nix_mtr_capabilities_init(struct rte_eth_dev *eth_dev)
> +{
> +       struct rte_mtr_capabilities capa;
> +       struct rte_mtr_error error;
> +
> +       return cnxk_nix_mtr_capabilities_get(eth_dev, &capa, &error);
> +}
> --
> 2.25.1
>

  reply	other threads:[~2021-11-03 15:19 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-02  5:58 [dpdk-dev] [PATCH 1/2] common/cnxk: change policer timeuint to configured value Rakesh Kudurumalla
2021-11-02  5:58 ` [dpdk-dev] [PATCH 2/2] net/cnxk: integrate bpfcount get MBOX interface Rakesh Kudurumalla
2021-11-03 15:19   ` Jerin Jacob [this message]
2021-11-02  6:41 ` [dpdk-dev] [PATCH v2 1/2] common/cnxk: change policer timeuint to configured value Rakesh Kudurumalla
2021-11-02  6:41   ` [dpdk-dev] [PATCH v2 2/2] net/cnxk: integrate bpfcount get MBOX interface Rakesh Kudurumalla
2021-11-03 15:16   ` [dpdk-dev] [PATCH v2 1/2] common/cnxk: change policer timeuint to configured value Jerin Jacob

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CALBAE1PocB+Bo3W-fOHWwp08jC0WPsY2UtbTXZx=gGWDTFELCg@mail.gmail.com' \
    --to=jerinjacobk@gmail.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=jerinj@marvell.com \
    --cc=kirankumark@marvell.com \
    --cc=ndabilpuram@marvell.com \
    --cc=rkudurumalla@marvell.com \
    --cc=skori@marvell.com \
    --cc=skoteshwar@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).