Hello Qiming, Beilei, Could you please help us debug this issue? Anything that would help with getting to the bottom of anything that could go wrong during port init/cleanup would be appreciated - extra eal/testpmd options or even code changes (such as where could add extra debug messages). Thanks, Juraj On Wed, Mar 8, 2023 at 7:25 AM Juraj Linkeš wrote: > Hello Qiming, Beilei, > > Another reminder - are you looking at this by any chance? > > The high level short description is that testpmd/l3fwd breaks a link > between two servers while VPP (using DPDK) doesn't. This leads us to > believe there's a problem with testpmd/l3fwd/i40e driver in DPDK. > > Thanks, > Juraj > > On Tue, Feb 21, 2023 at 12:18 PM Juraj Linkeš > wrote: > > > > Hi Qiming, > > > > Just a friendly reminder, would you please take a look? > > > > Thanks, > > Juraj > > > > > > On Tue, Feb 7, 2023 at 3:10 AM Xing, Beilei > wrote: > > > > > > Hi Qiming, > > > > > > Could you please help on this? Thanks. > > > > > > BR, > > > Beilei > > > > > > > -----Original Message----- > > > > From: Juraj Linkeš > > > > Sent: Monday, February 6, 2023 4:53 PM > > > > To: Singh, Aman Deep ; Zhang, Yuying > > > > ; Xing, Beilei > > > > Cc: dev@dpdk.org; Ruifeng Wang ; Zhang, Lijian > > > > ; Honnappa Nagarahalli > > > > > > > > Subject: Re: Testpmd/l3fwd port shutdown failure on Arm Altra systems > > > > > > > > Hello i40e and testpmd maintainers, > > > > > > > > A gentle reminder - would you please advise how to debug the issue > described > > > > below? > > > > > > > > Thanks, > > > > Juraj > > > > > > > > On Fri, Jan 20, 2023 at 1:07 PM Juraj Linkeš > > > > > wrote: > > > > > > > > > > Adding the logfile. > > > > > > > > > > > > > > > > > > > > One thing that's in the logs but didn't explicitly mention is the > DPDK version > > > > we've tried this with: > > > > > > > > > > EAL: RTE Version: 'DPDK 22.07.0' > > > > > > > > > > > > > > > > > > > > We also tried earlier versions going back to 21.08, with no luck. > I also did a > > > > quick check on 22.11, also with no luck. > > > > > > > > > > > > > > > > > > > > Juraj > > > > > > > > > > > > > > > > > > > > From: Juraj Linkeš > > > > > Sent: Friday, January 20, 2023 12:56 PM > > > > > To: 'aman.deep.singh@intel.com' ; > > > > > 'yuying.zhang@intel.com' ; Xing, Beilei > > > > > > > > > > Cc: dev@dpdk.org; Ruifeng Wang ; 'Lijian > Zhang' > > > > > ; 'Honnappa Nagarahalli' > > > > > > > > > > Subject: Testpmd/l3fwd port shutdown failure on Arm Altra systems > > > > > > > > > > > > > > > > > > > > Hello i40e and testpmd maintainers, > > > > > > > > > > > > > > > > > > > > We're hitting an issue with DPDK testpmd on Ampere Altra servers > in FD.io > > > > lab. > > > > > > > > > > > > > > > > > > > > A bit of background: along with VPP performance tests (which uses > DPDK), > > > > we're running a small number of basic DPDK testpmd and l3fwd tests > in FD.io > > > > as well. This is to catch any performance differences due to VPP > updating its > > > > DPDK version. > > > > > > > > > > > > > > > > > > > > We're running both l3fwd tests and testpmd tests. The Altra > servers are two > > > > socket and the topology is TG -> DUT1 -> DUT2 -> TG, traffic flows > in both > > > > directions, but nothing gets forwarded (with a slight caveat - put a > pin in this). > > > > There's nothing special in the tests, just forwarding traffic. The > NIC we're > > > > testing is xl710-QDA2. > > > > > > > > > > > > > > > > > > > > The same tests are passing on all other testbeds - we have various > two node > > > > (1 DUT, 1 TG) and three node (2 DUT, 1 TG) Intel and Arm testbeds > and with > > > > various NICs (Intel 700 and 800 series and the Intel testbeds use > some > > > > Mellanox NICs as well). We don't have quite the same combination of > another > > > > three node topology with the same NIC though, so it looks like > something with > > > > testpmd/l3fwd and xl710-QDA2 on Altra servers. > > > > > > > > > > > > > > > > > > > > VPP performance tests are passing, but l3fwd and testpmd fail. > This leads us > > > > to believe to it's a software issue, but there could something wrong > with the > > > > hardware. I'll talk about testpmd from now on, but as far we can > tell, the > > > > behavior is the same for testpmd and l3fwd. > > > > > > > > > > > > > > > > > > > > Getting back to the caveat mentioned earlier, there seems to be > something > > > > wrong with port shutdown. When running testpmd on a testbed that > hasn't > > > > been used for a while it seems that all ports are up right away (we > don't see > > > > any "Port 0|1: link state change event") and the setup works fine > (forwarding > > > > works). After restarting testpmd (restarting on one server is > sufficient), the > > > > ports between DUT1 and DUT2 (but not between DUTs and TG) go down and > > > > are not usable in DPDK, VPP or in Linux (with i40e kernel driver) > for a while > > > > (measured in minutes, sometimes dozens of minutes; the duration is > seemingly > > > > random). The ports eventually recover and can be used again, but > there's > > > > nothing in syslog suggesting what happened. > > > > > > > > > > > > > > > > > > > > What seems to be happening is testpmd put the ports into some > faulty state. > > > > This only happens on the DUT1 -> DUT2 link though (the ports between > the > > > > two testpmds), not on TG -> DUT1 link (the TG port is left alone). > > > > > > > > > > > > > > > > > > > > Some more info: > > > > > > > > > > We've come across the issue with this configuration: > > > > > > > > > > OS: Ubuntu20.04 with kernel 5.4.0-65-generic. > > > > > > > > > > Old NIC firmware, never upgraded: 6.01 0x800035da 1.1747.0. > > > > > > > > > > Drivers versions: i40e 2.17.15 and iavf 4.3.19. > > > > > > > > > > > > > > > > > > > > As well as with this configuration: > > > > > > > > > > OS: Ubuntu22.04 with kernel 5.15.0-46-generic. > > > > > > > > > > Updated firmware: 8.30 0x8000a4ae 1.2926.0. > > > > > > > > > > Drivers: i40e 2.19.3 and iavf 4.5.3. > > > > > > > > > > > > > > > > > > > > Unsafe noiommu mode is disabled: > > > > > > > > > > cat /sys/module/vfio/parameters/enable_unsafe_noiommu_mode > > > > > > > > > > N > > > > > > > > > > > > > > > > > > > > We used DPDK 22.07 in manual testing and built it on DUTs, using > generic > > > > build: > > > > > > > > > > meson -Dexamples=l3fwd -Dc_args=-DRTE_LIBRTE_I40E_16BYTE_RX_DESC=y > > > > > -Dplatform=generic build > > > > > > > > > > > > > > > > > > > > We're running testpmd with this command: > > > > > > > > > > sudo build/app/dpdk-testpmd -v -l 1,2 -a 0004:04:00.1 -a > 0004:04:00.0 > > > > > --in-memory -- -i --forward-mode=io --burst=64 --txq=1 --rxq=1 > > > > > --tx-offloads=0x0 --numa --auto-start --total-num-mbufs=32768 > > > > > --nb-ports=2 --portmask=0x3 --max-pkt-len=1518 --mbuf-size=16384 > > > > > --nb-cores=1 > > > > > > > > > > > > > > > > > > > > And l3fwd (with different macs on the other server): > > > > > > > > > > sudo /tmp/openvpp-testing/dpdk/build/examples/dpdk-l3fwd -v -l 1,2 > -a > > > > > 0004:04:00.0 -a 0004:04:00.1 --in-memory -- --parse-ptype > > > > > --eth-dest="0,40:a6:b7:85:e7:79" --eth-dest="1,3c:fd:fe:c3:e7:a1" > > > > > --config="(0, 0, 2),(1, 0, 2)" -P -L -p 0x3 > > > > > > > > > > > > > > > > > > > > We tried adding logs with --log-level=pmd,debug and > --no-lsc-interrupt, but > > > > that didn't reveal anything helpful, as far as we can tell - please > have a look at > > > > the attached log. The faulty port is port0 (starts out as down, then > we waited > > > > for around 25 minutes for it to go up and then we shut down testpmd). > > > > > > > > > > > > > > > > > > > > We'd like to ask for pointers on what could be the cause or how to > debug > > > > this issue further. > > > > > > > > > > > > > > > > > > > > Thanks, > > > > > Juraj >