RE: [PATCH v5] net/i40e: support FEC feature

["Zeng, ZhichaoX" <zhichaox.zeng@intel.com>]

Hi Bruce,

Kindly ping for review~ Thanks.

Regards
Zhichao

> -----Original Message-----
> From: Zeng, ZhichaoX <zhichaox.zeng@intel.com>
> Sent: Thursday, April 11, 2024 5:30 PM
> To: dev@dpdk.org
> Cc: Medvedkin, Vladimir <vladimir.medvedkin@intel.com>; Cui, KaixinX
> <kaixinx.cui@intel.com>; Zeng, ZhichaoX <zhichaox.zeng@intel.com>; Yang,
> Qiming <qiming.yang@intel.com>; Yuying Zhang <Yuying.Zhang@intel.com>
> Subject: [PATCH v5] net/i40e: support FEC feature
> 
> This patch enabled querying Forward Error Correction(FEC) capabilities, set
> FEC mode and get current FEC mode functions.
> 
> Signed-off-by: Qiming Yang <qiming.yang@intel.com>
> Signed-off-by: Zhichao Zeng <zhichaox.zeng@intel.com>
> 
> ---
> v5: fix some judgments
> v4: fix some logic
> v3: optimize code details
> v2: update NIC feature document
> ---
>  doc/guides/nics/features/i40e.ini      |   1 +
>  doc/guides/rel_notes/release_24_07.rst |   4 +
>  drivers/net/i40e/i40e_ethdev.c         | 237 +++++++++++++++++++++++++
>  3 files changed, 242 insertions(+)
> 
> diff --git a/doc/guides/nics/features/i40e.ini
> b/doc/guides/nics/features/i40e.ini
> index ef7514c44b..4610444ace 100644
> --- a/doc/guides/nics/features/i40e.ini
> +++ b/doc/guides/nics/features/i40e.ini
> @@ -32,6 +32,7 @@ Traffic manager      = Y
>  CRC offload          = Y
>  VLAN offload         = Y
>  QinQ offload         = P
> +FEC                  = Y
>  L3 checksum offload  = P
>  L4 checksum offload  = P
>  Inner L3 checksum    = P
> diff --git a/doc/guides/rel_notes/release_24_07.rst
> b/doc/guides/rel_notes/release_24_07.rst
> index a69f24cf99..1e65f70d6c 100644
> --- a/doc/guides/rel_notes/release_24_07.rst
> +++ b/doc/guides/rel_notes/release_24_07.rst
> @@ -55,6 +55,10 @@ New Features
>       Also, make sure to start the actual text at the margin.
>       =======================================================
> 
> +* **Updated Intel i40e driver.**
> +
> +  * Added support for configuring the Forward Error Correction(FEC)
> + mode, querying
> +  * FEC capabilities and current FEC mode from a device.
> 
>  Removed Items
>  -------------
> diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
> index 380ce1a720..bc4a62f64b 100644
> --- a/drivers/net/i40e/i40e_ethdev.c
> +++ b/drivers/net/i40e/i40e_ethdev.c
> @@ -406,6 +406,10 @@ static void i40e_ethertype_filter_restore(struct
> i40e_pf *pf);  static void i40e_tunnel_filter_restore(struct i40e_pf *pf);  static
> void i40e_filter_restore(struct i40e_pf *pf);  static void
> i40e_notify_all_vfs_link_status(struct rte_eth_dev *dev);
> +static int i40e_fec_get_capability(struct rte_eth_dev *dev,
> +	struct rte_eth_fec_capa *speed_fec_capa, unsigned int num); static int
> +i40e_fec_get(struct rte_eth_dev *dev, uint32_t *fec_capa); static int
> +i40e_fec_set(struct rte_eth_dev *dev, uint32_t fec_capa);
> 
>  static const char *const valid_keys[] = {
>  	ETH_I40E_FLOATING_VEB_ARG,
> @@ -521,6 +525,9 @@ static const struct eth_dev_ops i40e_eth_dev_ops = {
>  	.tm_ops_get                   = i40e_tm_ops_get,
>  	.tx_done_cleanup              = i40e_tx_done_cleanup,
>  	.get_monitor_addr             = i40e_get_monitor_addr,
> +	.fec_get_capability           = i40e_fec_get_capability,
> +	.fec_get                      = i40e_fec_get,
> +	.fec_set                      = i40e_fec_set,
>  };
> 
>  /* store statistics names and its offset in stats structure */ @@ -12297,6
> +12304,236 @@ i40e_cloud_filter_qinq_create(struct i40e_pf *pf)
>  	return ret;
>  }
> 
> +static int
> +i40e_fec_get_capability(struct rte_eth_dev *dev,
> +	struct rte_eth_fec_capa *speed_fec_capa, __rte_unused unsigned int
> +num) {
> +	struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data-
> >dev_private);
> +
> +	if (hw->mac.type == I40E_MAC_X722 &&
> +	    !(hw->flags & I40E_HW_FLAG_X722_FEC_REQUEST_CAPABLE)) {
> +		PMD_DRV_LOG(ERR, "Setting FEC encoding not supported
> by"
> +			 " firmware. Please update the NVM image.\n");
> +		return -ENOTSUP;
> +	}
> +
> +	if (hw->device_id == I40E_DEV_ID_25G_SFP28 ||
> +	    hw->device_id == I40E_DEV_ID_25G_B) {
> +		if (speed_fec_capa) {
> +			speed_fec_capa->speed =
> RTE_ETH_SPEED_NUM_25G;
> +			speed_fec_capa->capa =
> RTE_ETH_FEC_MODE_CAPA_MASK(NOFEC) |
> +
> RTE_ETH_FEC_MODE_CAPA_MASK(BASER) |
> +
> RTE_ETH_FEC_MODE_CAPA_MASK(AUTO) |
> +
> RTE_ETH_FEC_MODE_CAPA_MASK(RS);
> +		}
> +
> +		/* since HW only supports 25G */
> +		return 1;
> +	} else if (hw->device_id == I40E_DEV_ID_KX_X722) {
> +		if (speed_fec_capa) {
> +			speed_fec_capa->speed =
> RTE_ETH_SPEED_NUM_25G;
> +			speed_fec_capa->capa =
> RTE_ETH_FEC_MODE_CAPA_MASK(AUTO) |
> +
> RTE_ETH_FEC_MODE_CAPA_MASK(RS);
> +		}
> +		return 1;
> +	}
> +
> +	return -ENOTSUP;
> +}
> +
> +static int
> +i40e_fec_get(struct rte_eth_dev *dev, uint32_t *fec_capa) {
> +	struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data-
> >dev_private);
> +	struct i40e_aq_get_phy_abilities_resp abilities = {0};
> +	struct i40e_link_status link_status = {0};
> +	uint8_t current_fec_mode = 0, fec_config = 0;
> +	bool link_up, enable_lse;
> +	int ret = 0;
> +
> +	enable_lse = dev->data->dev_conf.intr_conf.lsc ? true : false;
> +	/* Get link info */
> +	ret = i40e_aq_get_link_info(hw, enable_lse, &link_status, NULL);
> +	if (ret != I40E_SUCCESS) {
> +		PMD_DRV_LOG(ERR, "Failed to get link information: %d\n",
> +				ret);
> +		return -ENOTSUP;
> +	}
> +
> +	link_up = link_status.link_info & I40E_AQ_LINK_UP;
> +
> +	ret = i40e_aq_get_phy_capabilities(hw, false, false, &abilities,
> +						  NULL);
> +	if (ret) {
> +		PMD_DRV_LOG(ERR, "Failed to get PHY capabilities: %d\n",
> +				ret);
> +		return -ENOTSUP;
> +	}
> +
> +	/**
> +	 * If link is down and AUTO is enabled, AUTO is returned,
> +	 * otherwise, configured FEC mode is returned.
> +	 * If link is up, current FEC mode is returned.
> +	 */
> +	fec_config = abilities.fec_cfg_curr_mod_ext_info;
> +	current_fec_mode = link_status.fec_info;
> +
> +	if (link_up) {
> +		switch (current_fec_mode) {
> +		case I40E_AQ_CONFIG_FEC_KR_ENA:
> +			*fec_capa =
> RTE_ETH_FEC_MODE_TO_CAPA(RTE_ETH_FEC_BASER);
> +			break;
> +		case I40E_AQ_CONFIG_FEC_RS_ENA:
> +			*fec_capa =
> RTE_ETH_FEC_MODE_TO_CAPA(RTE_ETH_FEC_RS);
> +			break;
> +		case 0:
> +			*fec_capa =
> RTE_ETH_FEC_MODE_TO_CAPA(RTE_ETH_FEC_NOFEC);
> +			break;
> +		default:
> +			return -EINVAL;
> +		}
> +		return 0;
> +	}
> +
> +	if (fec_config & I40E_AQ_ENABLE_FEC_AUTO) {
> +		*fec_capa =
> RTE_ETH_FEC_MODE_TO_CAPA(RTE_ETH_FEC_AUTO);
> +		return 0;
> +	}
> +
> +	uint32_t temp_fec_capa = 0;
> +	if (fec_config & I40E_AQ_ENABLE_FEC_KR)
> +		temp_fec_capa |=
> RTE_ETH_FEC_MODE_TO_CAPA(RTE_ETH_FEC_BASER);
> +	if (fec_config & I40E_AQ_ENABLE_FEC_RS)
> +		temp_fec_capa |=
> RTE_ETH_FEC_MODE_TO_CAPA(RTE_ETH_FEC_RS);
> +	if (temp_fec_capa == 0)
> +		temp_fec_capa =
> RTE_ETH_FEC_MODE_TO_CAPA(RTE_ETH_FEC_NOFEC);
> +
> +	*fec_capa = temp_fec_capa;
> +	return 0;
> +}
> +
> +static int
> +i40e_fec_set(struct rte_eth_dev *dev, uint32_t fec_capa) {
> +	struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data-
> >dev_private);
> +	struct i40e_aq_get_phy_abilities_resp abilities = {0};
> +	struct i40e_aq_set_phy_config config = {0};
> +	enum i40e_status_code status;
> +	uint8_t req_fec = 0, fec_auto = 0, fec_kr = 0, fec_rs = 0;
> +
> +	if (hw->device_id != I40E_DEV_ID_25G_SFP28 &&
> +	    hw->device_id != I40E_DEV_ID_25G_B &&
> +	    hw->device_id != I40E_DEV_ID_KX_X722) {
> +		return -ENOTSUP;
> +	}
> +
> +	if (hw->mac.type == I40E_MAC_X722 &&
> +	    !(hw->flags & I40E_HW_FLAG_X722_FEC_REQUEST_CAPABLE)) {
> +		PMD_DRV_LOG(ERR, "Setting FEC encoding not supported
> by"
> +			 " firmware. Please update the NVM image.\n");
> +		return -ENOTSUP;
> +	}
> +
> +	/**
> +	 * Copy the current user PHY configuration. The current user PHY
> +	 * configuration is initialized during probe from PHY capabilities
> +	 * software mode, and updated on set PHY configuration.
> +	 */
> +	if (fec_capa == 0)
> +		return -EINVAL;
> +
> +	if (fec_capa & RTE_ETH_FEC_MODE_CAPA_MASK(AUTO))
> +		fec_auto = 1;
> +
> +	if (fec_capa & RTE_ETH_FEC_MODE_CAPA_MASK(BASER))
> +		fec_kr = 1;
> +
> +	if (fec_capa & RTE_ETH_FEC_MODE_CAPA_MASK(RS))
> +		fec_rs = 1;
> +
> +	if (fec_auto) {
> +		if (hw->mac.type == I40E_MAC_X722) {
> +			PMD_DRV_LOG(ERR, "X722 Unsupported FEC mode:
> AUTO");
> +			return -EINVAL;
> +		}
> +		if (fec_kr || fec_rs) {
> +			if (fec_kr)
> +				req_fec = I40E_AQ_SET_FEC_ABILITY_KR |
> +
> 	I40E_AQ_SET_FEC_REQUEST_KR;
> +			if (fec_rs) {
> +				if (hw->mac.type == I40E_MAC_X722) {
> +					PMD_DRV_LOG(ERR, "X722
> Unsupported FEC mode: RS");
> +					return -EINVAL;
> +				}
> +				req_fec = I40E_AQ_SET_FEC_ABILITY_RS |
> +
> 	I40E_AQ_SET_FEC_REQUEST_RS;
> +			}
> +		} else {
> +			if (hw->mac.type == I40E_MAC_X722) {
> +				req_fec = I40E_AQ_SET_FEC_ABILITY_KR |
> +
> I40E_AQ_SET_FEC_REQUEST_KR;
> +			} else {
> +				req_fec = I40E_AQ_SET_FEC_ABILITY_KR |
> +
> I40E_AQ_SET_FEC_REQUEST_KR |
> +
> I40E_AQ_SET_FEC_ABILITY_RS |
> +
> I40E_AQ_SET_FEC_REQUEST_RS;
> +			}
> +		}
> +	} else {
> +		if (fec_kr ^ fec_rs) {
> +			if (fec_kr) {
> +				req_fec = I40E_AQ_SET_FEC_ABILITY_KR |
> +
> 	I40E_AQ_SET_FEC_REQUEST_KR;
> +			} else {
> +				if (hw->mac.type == I40E_MAC_X722) {
> +					PMD_DRV_LOG(ERR, "X722
> Unsupported FEC mode: RS");
> +					return -EINVAL;
> +				}
> +				req_fec = I40E_AQ_SET_FEC_ABILITY_RS |
> +
> 	I40E_AQ_SET_FEC_REQUEST_RS;
> +			}
> +		} else {
> +			return -EINVAL;
> +		}
> +	}
> +
> +	/* Get the current phy config */
> +	status = i40e_aq_get_phy_capabilities(hw, false, false, &abilities,
> +					      NULL);
> +	if (status) {
> +		PMD_DRV_LOG(ERR, "Failed to get PHY capabilities: %d\n",
> +				status);
> +		return -ENOTSUP;
> +	}
> +
> +	if (abilities.fec_cfg_curr_mod_ext_info != req_fec) {
> +		config.phy_type = abilities.phy_type;
> +		config.abilities = abilities.abilities |
> +				   I40E_AQ_PHY_ENABLE_ATOMIC_LINK;
> +		config.phy_type_ext = abilities.phy_type_ext;
> +		config.link_speed = abilities.link_speed;
> +		config.eee_capability = abilities.eee_capability;
> +		config.eeer = abilities.eeer_val;
> +		config.low_power_ctrl = abilities.d3_lpan;
> +		config.fec_config = req_fec &
> I40E_AQ_PHY_FEC_CONFIG_MASK;
> +		status = i40e_aq_set_phy_config(hw, &config, NULL);
> +		if (status) {
> +			PMD_DRV_LOG(ERR, "Failed to set PHY
> capabilities: %d\n",
> +			status);
> +			return -ENOTSUP;
> +		}
> +	}
> +
> +	status = i40e_update_link_info(hw);
> +	if (status) {
> +		PMD_DRV_LOG(ERR, "Failed to set PHY capabilities: %d\n",
> +			status);
> +		return -ENOTSUP;
> +	}
> +
> +	return 0;
> +}
> +
>  RTE_LOG_REGISTER_SUFFIX(i40e_logtype_init, init, NOTICE);
> RTE_LOG_REGISTER_SUFFIX(i40e_logtype_driver, driver, NOTICE);  #ifdef
> RTE_ETHDEV_DEBUG_RX
> --
> 2.34.1