* [PATCH v1 0/4] test/cryptodev: add ECDH tests
@ 2023-10-26 8:15 Gowrishankar Muthukrishnan
2023-10-26 8:15 ` [PATCH v1 1/4] " Gowrishankar Muthukrishnan
` (3 more replies)
0 siblings, 4 replies; 9+ messages in thread
From: Gowrishankar Muthukrishnan @ 2023-10-26 8:15 UTC (permalink / raw)
To: dev; +Cc: anoobj, Akhil Goyal, Fan Zhang, Gowrishankar Muthukrishnan
This patch series adds ECDH testsuite. It also enables ECDH
support in CNXK PMD.
Gowrishankar Muthukrishnan (4):
test/cryptodev: add ECDH tests
crypto/cnxk: use generic EC opcodes
crypto/cnxk: change order of ECFPM params
crypto/cnxk: add ECDH support
app/test/test_cryptodev_asym.c | 729 ++++++++++++++++++
app/test/test_cryptodev_asym_util.h | 12 +
app/test/test_cryptodev_ecdh_test_vectors.h | 577 ++++++++++++++
app/test/test_cryptodev_ecdsa_test_vectors.h | 3 +
doc/guides/cryptodevs/features/cn10k.ini | 1 +
doc/guides/cryptodevs/features/cn9k.ini | 1 +
drivers/common/cnxk/roc_ae.h | 21 +-
drivers/crypto/cnxk/cn10k_cryptodev_ops.c | 12 +
drivers/crypto/cnxk/cnxk_ae.h | 240 ++++--
drivers/crypto/cnxk/cnxk_cryptodev.h | 2 +-
.../crypto/cnxk/cnxk_cryptodev_capabilities.c | 14 +
11 files changed, 1543 insertions(+), 69 deletions(-)
create mode 100644 app/test/test_cryptodev_ecdh_test_vectors.h
--
2.25.1
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v1 1/4] test/cryptodev: add ECDH tests
2023-10-26 8:15 [PATCH v1 0/4] test/cryptodev: add ECDH tests Gowrishankar Muthukrishnan
@ 2023-10-26 8:15 ` Gowrishankar Muthukrishnan
2023-10-30 18:48 ` Akhil Goyal
2023-11-08 13:17 ` [PATCH v2] " Gowrishankar Muthukrishnan
2023-10-26 8:15 ` [PATCH v1 2/4] crypto/cnxk: use generic EC opcodes Gowrishankar Muthukrishnan
` (2 subsequent siblings)
3 siblings, 2 replies; 9+ messages in thread
From: Gowrishankar Muthukrishnan @ 2023-10-26 8:15 UTC (permalink / raw)
To: dev; +Cc: anoobj, Akhil Goyal, Fan Zhang, Gowrishankar Muthukrishnan
Add ECDH tests.
Signed-off-by: Gowrishankar Muthukrishnan <gmuthukrishn@marvell.com>
---
app/test/test_cryptodev_asym.c | 729 +++++++++++++++++++
app/test/test_cryptodev_asym_util.h | 12 +
app/test/test_cryptodev_ecdh_test_vectors.h | 577 +++++++++++++++
app/test/test_cryptodev_ecdsa_test_vectors.h | 3 +
4 files changed, 1321 insertions(+)
create mode 100644 app/test/test_cryptodev_ecdh_test_vectors.h
diff --git a/app/test/test_cryptodev_asym.c b/app/test/test_cryptodev_asym.c
index c6334380d7..965e71d0bc 100644
--- a/app/test/test_cryptodev_asym.c
+++ b/app/test/test_cryptodev_asym.c
@@ -17,6 +17,7 @@
#include "test_cryptodev.h"
#include "test_cryptodev_dh_test_vectors.h"
#include "test_cryptodev_dsa_test_vectors.h"
+#include "test_cryptodev_ecdh_test_vectors.h"
#include "test_cryptodev_ecdsa_test_vectors.h"
#include "test_cryptodev_ecpm_test_vectors.h"
#include "test_cryptodev_mod_test_vectors.h"
@@ -1806,6 +1807,732 @@ test_ecpm_all_curve(void)
return overall_status;
}
+static int
+test_ecdh_priv_key_generate(enum curve curve_id)
+{
+ struct crypto_testsuite_params_asym *ts_params = &testsuite_params;
+ const struct rte_cryptodev_asymmetric_xform_capability *capa;
+ struct rte_mempool *sess_mpool = ts_params->session_mpool;
+ struct rte_mempool *op_mpool = ts_params->op_mpool;
+ struct rte_cryptodev_asym_capability_idx idx;
+ uint8_t dev_id = ts_params->valid_devs[0];
+ struct rte_crypto_asym_xform xform = {0};
+ struct rte_crypto_op *result_op = NULL;
+ uint8_t output_buf[TEST_DATA_SIZE];
+ struct rte_crypto_asym_op *asym_op;
+ struct rte_crypto_op *op = NULL;
+ int ret, status = TEST_SUCCESS;
+ uint16_t output_buflen = 0;
+ void *sess = NULL;
+ int curve;
+
+ /* Check ECDH capability */
+ idx.type = RTE_CRYPTO_ASYM_XFORM_ECDH;
+ capa = rte_cryptodev_asym_capability_get(dev_id, &idx);
+ if (capa == NULL)
+ return -ENOTSUP;
+
+ if (!(capa->op_types & (1 << RTE_CRYPTO_ASYM_KE_PRIV_KEY_GENERATE)))
+ return -ENOTSUP;
+
+ switch (curve_id) {
+ case SECP192R1:
+ curve = RTE_CRYPTO_EC_GROUP_SECP192R1;
+ output_buflen = 24;
+ break;
+ case SECP224R1:
+ curve = RTE_CRYPTO_EC_GROUP_SECP224R1;
+ output_buflen = 28;
+ break;
+ case SECP256R1:
+ curve = RTE_CRYPTO_EC_GROUP_SECP256R1;
+ output_buflen = 32;
+ break;
+ case SECP384R1:
+ curve = RTE_CRYPTO_EC_GROUP_SECP384R1;
+ output_buflen = 48;
+ break;
+ case SECP521R1:
+ curve = RTE_CRYPTO_EC_GROUP_SECP521R1;
+ output_buflen = 66;
+ break;
+ default:
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Unsupported curve id\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+
+ /* Setup crypto op data structure */
+ op = rte_crypto_op_alloc(op_mpool, RTE_CRYPTO_OP_TYPE_ASYMMETRIC);
+ if (op == NULL) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Failed to allocate asymmetric crypto "
+ "operation struct\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+ asym_op = op->asym;
+
+ /* Setup asym xform */
+ xform.next = NULL;
+ xform.xform_type = RTE_CRYPTO_ASYM_XFORM_ECDH;
+ xform.ec.curve_id = curve;
+
+ ret = rte_cryptodev_asym_session_create(dev_id, &xform, sess_mpool, &sess);
+ if (ret < 0) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Session creation failed\n");
+ status = (ret == -ENOTSUP) ? TEST_SKIPPED : TEST_FAILED;
+ goto exit;
+ }
+
+ /* Attach asymmetric crypto session to crypto operations */
+ rte_crypto_op_attach_asym_session(op, sess);
+
+ /* Populate op with operational details */
+ asym_op->ecdh.ke_type = RTE_CRYPTO_ASYM_KE_PRIV_KEY_GENERATE;
+
+ /* Init out buf */
+ asym_op->ecdh.priv_key.data = output_buf;
+ asym_op->ecdh.priv_key.length = output_buflen;
+
+ RTE_LOG(DEBUG, USER1, "Process ASYM operation\n");
+
+ /* Process crypto operation */
+ if (rte_cryptodev_enqueue_burst(dev_id, 0, &op, 1) != 1) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Error sending packet for operation\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+
+ while (rte_cryptodev_dequeue_burst(dev_id, 0, &result_op, 1) == 0)
+ rte_pause();
+
+ if (result_op == NULL) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Failed to process asym crypto op\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+
+ if (result_op->status != RTE_CRYPTO_OP_STATUS_SUCCESS) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Failed to process asym crypto op\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+
+ asym_op = result_op->asym;
+
+ debug_hexdump(stdout, "priv_key:",
+ asym_op->ecdh.priv_key.data, asym_op->ecdh.priv_key.length);
+
+exit:
+ if (sess != NULL)
+ rte_cryptodev_asym_session_free(dev_id, sess);
+ rte_crypto_op_free(op);
+ return status;
+}
+
+static int
+test_ecdh_pub_key_generate(enum curve curve_id)
+{
+ struct crypto_testsuite_params_asym *ts_params = &testsuite_params;
+ const struct rte_cryptodev_asymmetric_xform_capability *capa;
+ struct rte_mempool *sess_mpool = ts_params->session_mpool;
+ struct rte_mempool *op_mpool = ts_params->op_mpool;
+ struct crypto_testsuite_ecdh_params input_params;
+ struct rte_cryptodev_asym_capability_idx idx;
+ uint8_t dev_id = ts_params->valid_devs[0];
+ struct rte_crypto_asym_xform xform = {0};
+ struct rte_crypto_op *result_op = NULL;
+ uint8_t output_buf_x[TEST_DATA_SIZE];
+ uint8_t output_buf_y[TEST_DATA_SIZE];
+ struct rte_crypto_asym_op *asym_op;
+ struct rte_crypto_op *op = NULL;
+ int ret, status = TEST_SUCCESS;
+ void *sess = NULL;
+
+ /* Check ECDH capability */
+ idx.type = RTE_CRYPTO_ASYM_XFORM_ECDH;
+ capa = rte_cryptodev_asym_capability_get(dev_id, &idx);
+ if (capa == NULL)
+ return -ENOTSUP;
+
+ if (!(capa->op_types & (1 << RTE_CRYPTO_ASYM_KE_PUB_KEY_GENERATE)))
+ return -ENOTSUP;
+
+ switch (curve_id) {
+ case SECP192R1:
+ input_params = ecdh_param_secp192r1;
+ break;
+ case SECP224R1:
+ input_params = ecdh_param_secp224r1;
+ break;
+ case SECP256R1:
+ input_params = ecdh_param_secp256r1;
+ break;
+ case SECP384R1:
+ input_params = ecdh_param_secp384r1;
+ break;
+ case SECP521R1:
+ input_params = ecdh_param_secp521r1;
+ break;
+ default:
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Unsupported curve id\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+
+ debug_hexdump(stdout, "pkey:",
+ input_params.pkey_A.data, input_params.pkey_A.length);
+
+ /* Setup crypto op data structure */
+ op = rte_crypto_op_alloc(op_mpool, RTE_CRYPTO_OP_TYPE_ASYMMETRIC);
+ if (op == NULL) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Failed to allocate asymmetric crypto "
+ "operation struct\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+ asym_op = op->asym;
+
+ /* Setup asym xform */
+ xform.next = NULL;
+ xform.xform_type = RTE_CRYPTO_ASYM_XFORM_ECDH;
+ xform.ec.curve_id = input_params.curve;
+ xform.ec.pkey.data = input_params.pkey_A.data;
+ xform.ec.pkey.length = input_params.pkey_A.length;
+
+ ret = rte_cryptodev_asym_session_create(dev_id, &xform, sess_mpool, &sess);
+ if (ret < 0) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Session creation failed\n");
+ status = (ret == -ENOTSUP) ? TEST_SKIPPED : TEST_FAILED;
+ goto exit;
+ }
+
+ /* Attach asymmetric crypto session to crypto operations */
+ rte_crypto_op_attach_asym_session(op, sess);
+
+ /* Populate op with operational details */
+ asym_op->ecdh.ke_type = RTE_CRYPTO_ASYM_KE_PUB_KEY_GENERATE;
+
+ /* Init out buf */
+ asym_op->ecdh.pub_key.x.data = output_buf_x;
+ asym_op->ecdh.pub_key.y.data = output_buf_y;
+
+ RTE_LOG(DEBUG, USER1, "Process ASYM operation\n");
+
+ /* Process crypto operation */
+ if (rte_cryptodev_enqueue_burst(dev_id, 0, &op, 1) != 1) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Error sending packet for operation\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+
+ while (rte_cryptodev_dequeue_burst(dev_id, 0, &result_op, 1) == 0)
+ rte_pause();
+
+ if (result_op == NULL) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Failed to process asym crypto op\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+
+ if (result_op->status != RTE_CRYPTO_OP_STATUS_SUCCESS) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Failed to process asym crypto op\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+
+ asym_op = result_op->asym;
+
+ debug_hexdump(stdout, "qx:",
+ asym_op->ecdh.pub_key.x.data, asym_op->ecdh.pub_key.x.length);
+ debug_hexdump(stdout, "qy:",
+ asym_op->ecdh.pub_key.y.data, asym_op->ecdh.pub_key.y.length);
+
+ ret = verify_ecdh_secret(input_params.pubkey_qA_x.data,
+ input_params.pubkey_qA_y.data, result_op);
+ if (ret) {
+ status = TEST_FAILED;
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "ECDH public key generation failed.\n");
+ goto exit;
+ }
+
+exit:
+ if (sess != NULL)
+ rte_cryptodev_asym_session_free(dev_id, sess);
+ rte_crypto_op_free(op);
+ return status;
+}
+
+static int
+test_ecdh_pub_key_verify(enum curve curve_id)
+{
+ struct crypto_testsuite_params_asym *ts_params = &testsuite_params;
+ const struct rte_cryptodev_asymmetric_xform_capability *capa;
+ struct rte_mempool *sess_mpool = ts_params->session_mpool;
+ struct rte_mempool *op_mpool = ts_params->op_mpool;
+ struct crypto_testsuite_ecdh_params input_params;
+ struct rte_cryptodev_asym_capability_idx idx;
+ uint8_t dev_id = ts_params->valid_devs[0];
+ struct rte_crypto_asym_xform xform = {0};
+ struct rte_crypto_op *result_op = NULL;
+ struct rte_crypto_asym_op *asym_op;
+ struct rte_crypto_op *op = NULL;
+ int ret, status = TEST_SUCCESS;
+ void *sess = NULL;
+
+ /* Check ECDH capability */
+ idx.type = RTE_CRYPTO_ASYM_XFORM_ECDH;
+ capa = rte_cryptodev_asym_capability_get(dev_id, &idx);
+ if (capa == NULL)
+ return -ENOTSUP;
+
+ if (!(capa->op_types & (1 << RTE_CRYPTO_ASYM_KE_PUB_KEY_VERIFY)))
+ return -ENOTSUP;
+
+ switch (curve_id) {
+ case SECP192R1:
+ input_params = ecdh_param_secp192r1;
+ break;
+ case SECP224R1:
+ input_params = ecdh_param_secp224r1;
+ break;
+ case SECP256R1:
+ input_params = ecdh_param_secp256r1;
+ break;
+ case SECP384R1:
+ input_params = ecdh_param_secp384r1;
+ break;
+ case SECP521R1:
+ input_params = ecdh_param_secp521r1;
+ break;
+ default:
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Unsupported curve id\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+
+ debug_hexdump(stdout, "qx:",
+ input_params.pubkey_qA_x.data, input_params.pubkey_qA_x.length);
+ debug_hexdump(stdout, "qy:",
+ input_params.pubkey_qA_y.data, input_params.pubkey_qA_y.length);
+
+ /* Setup crypto op data structure */
+ op = rte_crypto_op_alloc(op_mpool, RTE_CRYPTO_OP_TYPE_ASYMMETRIC);
+ if (op == NULL) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Failed to allocate asymmetric crypto "
+ "operation struct\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+ asym_op = op->asym;
+
+ /* Setup asym xform */
+ xform.next = NULL;
+ xform.xform_type = RTE_CRYPTO_ASYM_XFORM_ECDH;
+ xform.ec.curve_id = input_params.curve;
+
+ ret = rte_cryptodev_asym_session_create(dev_id, &xform, sess_mpool, &sess);
+ if (ret < 0) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Session creation failed\n");
+ status = (ret == -ENOTSUP) ? TEST_SKIPPED : TEST_FAILED;
+ goto exit;
+ }
+
+ /* Attach asymmetric crypto session to crypto operations */
+ rte_crypto_op_attach_asym_session(op, sess);
+
+ /* Populate op with operational details */
+ asym_op->ecdh.ke_type = RTE_CRYPTO_ASYM_KE_PUB_KEY_VERIFY;
+ asym_op->ecdh.pub_key.x.data = input_params.pubkey_qA_x.data;
+ asym_op->ecdh.pub_key.x.length = input_params.pubkey_qA_x.length;
+ asym_op->ecdh.pub_key.y.data = input_params.pubkey_qA_y.data;
+ asym_op->ecdh.pub_key.y.length = input_params.pubkey_qA_y.length;
+
+ RTE_LOG(DEBUG, USER1, "Process ASYM operation\n");
+
+ /* Process crypto operation */
+ if (rte_cryptodev_enqueue_burst(dev_id, 0, &op, 1) != 1) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Error sending packet for operation\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+
+ while (rte_cryptodev_dequeue_burst(dev_id, 0, &result_op, 1) == 0)
+ rte_pause();
+
+ if (result_op == NULL) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Failed to process asym crypto op\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+
+ if (result_op->status != RTE_CRYPTO_OP_STATUS_SUCCESS) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Failed to process asym crypto op\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+
+exit:
+ if (sess != NULL)
+ rte_cryptodev_asym_session_free(dev_id, sess);
+ rte_crypto_op_free(op);
+ return status;
+}
+
+static int
+test_ecdh_shared_secret(enum curve curve_id)
+{
+ struct crypto_testsuite_params_asym *ts_params = &testsuite_params;
+ const struct rte_cryptodev_asymmetric_xform_capability *capa;
+ struct rte_mempool *sess_mpool = ts_params->session_mpool;
+ struct rte_mempool *op_mpool = ts_params->op_mpool;
+ struct crypto_testsuite_ecdh_params input_params;
+ struct rte_cryptodev_asym_capability_idx idx;
+ uint8_t dev_id = ts_params->valid_devs[0];
+ struct rte_crypto_asym_xform xform = {0};
+ struct rte_crypto_op *result_op = NULL;
+ uint8_t output_buf_x[TEST_DATA_SIZE];
+ uint8_t output_buf_y[TEST_DATA_SIZE];
+ struct rte_crypto_asym_op *asym_op;
+ struct rte_crypto_op *op = NULL;
+ int ret, status = TEST_SUCCESS;
+ void *sess = NULL;
+
+ /* Check ECDH capability */
+ idx.type = RTE_CRYPTO_ASYM_XFORM_ECDH;
+ capa = rte_cryptodev_asym_capability_get(dev_id, &idx);
+ if (capa == NULL)
+ return -ENOTSUP;
+
+ if (!(capa->op_types & (1 << RTE_CRYPTO_ASYM_KE_SHARED_SECRET_COMPUTE)))
+ return -ENOTSUP;
+
+ switch (curve_id) {
+ case SECP192R1:
+ input_params = ecdh_param_secp192r1;
+ break;
+ case SECP224R1:
+ input_params = ecdh_param_secp224r1;
+ break;
+ case SECP256R1:
+ input_params = ecdh_param_secp256r1;
+ break;
+ case SECP384R1:
+ input_params = ecdh_param_secp384r1;
+ break;
+ case SECP521R1:
+ input_params = ecdh_param_secp521r1;
+ break;
+ default:
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Unsupported curve id\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+
+ /* zA = dA.QB */
+ debug_hexdump(stdout, "pkey:",
+ input_params.pkey_A.data, input_params.pkey_A.length);
+ debug_hexdump(stdout, "qx:",
+ input_params.pubkey_qB_x.data, input_params.pubkey_qB_x.length);
+ debug_hexdump(stdout, "qy:",
+ input_params.pubkey_qB_y.data, input_params.pubkey_qB_y.length);
+
+ /* Setup crypto op data structure */
+ op = rte_crypto_op_alloc(op_mpool, RTE_CRYPTO_OP_TYPE_ASYMMETRIC);
+ if (op == NULL) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Failed to allocate asymmetric crypto "
+ "operation struct\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+ asym_op = op->asym;
+
+ /* Setup asym xform */
+ xform.next = NULL;
+ xform.xform_type = RTE_CRYPTO_ASYM_XFORM_ECDH;
+ xform.ec.curve_id = input_params.curve;
+ xform.ec.pkey.data = input_params.pkey_A.data;
+ xform.ec.pkey.length = input_params.pkey_A.length;
+ xform.ec.q.x.data = input_params.pubkey_qB_x.data;
+ xform.ec.q.x.length = input_params.pubkey_qB_x.length;
+ xform.ec.q.y.data = input_params.pubkey_qB_y.data;
+ xform.ec.q.y.length = input_params.pubkey_qB_y.length;
+
+ ret = rte_cryptodev_asym_session_create(dev_id, &xform, sess_mpool, &sess);
+ if (ret < 0) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Session creation failed\n");
+ status = (ret == -ENOTSUP) ? TEST_SKIPPED : TEST_FAILED;
+ goto exit;
+ }
+
+ /* Attach asymmetric crypto session to crypto operations */
+ rte_crypto_op_attach_asym_session(op, sess);
+
+ /* Populate op with operational details */
+ asym_op->ecdh.ke_type = RTE_CRYPTO_ASYM_KE_SHARED_SECRET_COMPUTE;
+
+ /* Init out buf */
+ asym_op->ecdh.shared_secret.x.data = output_buf_x;
+ asym_op->ecdh.shared_secret.y.data = output_buf_y;
+
+ RTE_LOG(DEBUG, USER1, "Process ASYM operation\n");
+
+ /* Process crypto operation */
+ if (rte_cryptodev_enqueue_burst(dev_id, 0, &op, 1) != 1) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Error sending packet for operation\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+
+ while (rte_cryptodev_dequeue_burst(dev_id, 0, &result_op, 1) == 0)
+ rte_pause();
+
+ if (result_op == NULL) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Failed to process asym crypto op\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+
+ if (result_op->status != RTE_CRYPTO_OP_STATUS_SUCCESS) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Failed to process asym crypto op\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+
+ asym_op = result_op->asym;
+
+ debug_hexdump(stdout, "secret_x:",
+ asym_op->ecdh.shared_secret.x.data, asym_op->ecdh.shared_secret.x.length);
+ debug_hexdump(stdout, "secret_y:",
+ asym_op->ecdh.shared_secret.y.data, asym_op->ecdh.shared_secret.y.length);
+
+ ret = verify_ecdh_secret(input_params.secret_x.data,
+ input_params.secret_y.data, result_op);
+ if (ret) {
+ status = TEST_FAILED;
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "ECDH shared secret compute failed.\n");
+ goto exit;
+ }
+
+ if (sess != NULL)
+ rte_cryptodev_asym_session_free(dev_id, sess);
+ rte_crypto_op_free(op);
+
+ /* zB = dB.QA */
+ debug_hexdump(stdout, "pkey:",
+ input_params.pkey_B.data, input_params.pkey_B.length);
+ debug_hexdump(stdout, "qx:",
+ input_params.pubkey_qA_x.data, input_params.pubkey_qA_x.length);
+ debug_hexdump(stdout, "qy:",
+ input_params.pubkey_qA_y.data, input_params.pubkey_qA_y.length);
+
+ /* Setup crypto op data structure */
+ op = rte_crypto_op_alloc(op_mpool, RTE_CRYPTO_OP_TYPE_ASYMMETRIC);
+ if (op == NULL) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Failed to allocate asymmetric crypto "
+ "operation struct\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+ asym_op = op->asym;
+
+ /* Setup asym xform */
+ xform.next = NULL;
+ xform.xform_type = RTE_CRYPTO_ASYM_XFORM_ECDH;
+ xform.ec.curve_id = input_params.curve;
+ xform.ec.pkey.data = input_params.pkey_B.data;
+ xform.ec.pkey.length = input_params.pkey_B.length;
+ xform.ec.q.x.data = input_params.pubkey_qA_x.data;
+ xform.ec.q.x.length = input_params.pubkey_qA_x.length;
+ xform.ec.q.y.data = input_params.pubkey_qA_y.data;
+ xform.ec.q.y.length = input_params.pubkey_qA_y.length;
+
+ ret = rte_cryptodev_asym_session_create(dev_id, &xform, sess_mpool, &sess);
+ if (ret < 0) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Session creation failed\n");
+ status = (ret == -ENOTSUP) ? TEST_SKIPPED : TEST_FAILED;
+ goto exit;
+ }
+
+ /* Attach asymmetric crypto session to crypto operations */
+ rte_crypto_op_attach_asym_session(op, sess);
+
+ /* Populate op with operational details */
+ asym_op->ecdh.ke_type = RTE_CRYPTO_ASYM_KE_SHARED_SECRET_COMPUTE;
+
+ /* Init out buf */
+ asym_op->ecdh.shared_secret.x.data = output_buf_x;
+ asym_op->ecdh.shared_secret.y.data = output_buf_y;
+
+ RTE_LOG(DEBUG, USER1, "Process ASYM operation\n");
+
+ /* Process crypto operation */
+ if (rte_cryptodev_enqueue_burst(dev_id, 0, &op, 1) != 1) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Error sending packet for operation\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+
+ while (rte_cryptodev_dequeue_burst(dev_id, 0, &result_op, 1) == 0)
+ rte_pause();
+
+ if (result_op == NULL) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Failed to process asym crypto op\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+
+ if (result_op->status != RTE_CRYPTO_OP_STATUS_SUCCESS) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Failed to process asym crypto op\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+
+ asym_op = result_op->asym;
+
+ debug_hexdump(stdout, "secret_x:",
+ asym_op->ecdh.shared_secret.x.data, asym_op->ecdh.shared_secret.x.length);
+ debug_hexdump(stdout, "secret_y:",
+ asym_op->ecdh.shared_secret.y.data, asym_op->ecdh.shared_secret.y.length);
+
+ ret = verify_ecdh_secret(input_params.secret_x.data,
+ input_params.secret_y.data, result_op);
+ if (ret) {
+ status = TEST_FAILED;
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "ECDH shared secret compute failed.\n");
+ goto exit;
+ }
+
+exit:
+ if (sess != NULL)
+ rte_cryptodev_asym_session_free(dev_id, sess);
+ rte_crypto_op_free(op);
+ return status;
+}
+
+static int
+test_ecdh_all_curve(void)
+{
+ int status, overall_status = TEST_SUCCESS;
+ enum curve curve_id;
+ int test_index = 0;
+ const char *msg;
+
+ for (curve_id = SECP192R1; curve_id < END_OF_CURVE_LIST; curve_id++) {
+ status = test_ecdh_priv_key_generate(curve_id);
+ if (status == TEST_SUCCESS) {
+ msg = "succeeded";
+ } else {
+ msg = "failed";
+ overall_status = status;
+ }
+ printf(" %u) TestCase ECDH private key generation for Curve %s %s\n",
+ test_index ++, curve[curve_id], msg);
+ }
+
+ for (curve_id = SECP192R1; curve_id < END_OF_CURVE_LIST; curve_id++) {
+ status = test_ecdh_pub_key_generate(curve_id);
+ if (status == TEST_SUCCESS) {
+ msg = "succeeded";
+ } else {
+ msg = "failed";
+ overall_status = status;
+ }
+ printf(" %u) TestCase ECDH public key generation for Curve %s %s\n",
+ test_index ++, curve[curve_id], msg);
+ }
+
+ for (curve_id = SECP192R1; curve_id < END_OF_CURVE_LIST; curve_id++) {
+ status = test_ecdh_pub_key_verify(curve_id);
+ if (status == TEST_SUCCESS) {
+ msg = "succeeded";
+ } else {
+ msg = "failed";
+ overall_status = status;
+ }
+ printf(" %u) TestCase ECDH public key verification for Curve %s %s\n",
+ test_index ++, curve[curve_id], msg);
+ }
+
+ for (curve_id = SECP192R1; curve_id < END_OF_CURVE_LIST; curve_id++) {
+ status = test_ecdh_shared_secret(curve_id);
+ if (status == TEST_SUCCESS) {
+ msg = "succeeded";
+ } else {
+ msg = "failed";
+ overall_status = status;
+ }
+ printf(" %u) TestCase ECDH shared secret compute for Curve %s %s\n",
+ test_index ++, curve[curve_id], msg);
+ }
+
+ return overall_status;
+}
+
static int
test_sm2_sign(void)
{
@@ -2848,6 +3575,8 @@ static struct unit_test_suite cryptodev_octeontx_asym_testsuite = {
test_ecdsa_sign_verify_all_curve),
TEST_CASE_ST(ut_setup_asym, ut_teardown_asym, test_sm2_sign),
TEST_CASE_ST(ut_setup_asym, ut_teardown_asym, test_sm2_verify),
+ TEST_CASE_ST(ut_setup_asym, ut_teardown_asym,
+ test_ecdh_all_curve),
TEST_CASE_ST(ut_setup_asym, ut_teardown_asym,
test_ecpm_all_curve),
TEST_CASES_END() /**< NULL terminate unit test array */
diff --git a/app/test/test_cryptodev_asym_util.h b/app/test/test_cryptodev_asym_util.h
index 83dc265dd7..07e6e831e8 100644
--- a/app/test/test_cryptodev_asym_util.h
+++ b/app/test/test_cryptodev_asym_util.h
@@ -57,4 +57,16 @@ static inline int verify_ecpm(uint8_t *result_x, uint8_t *result_y,
return 0;
}
+
+static inline int verify_ecdh_secret(uint8_t *result_x, uint8_t *result_y,
+ struct rte_crypto_op *result_op)
+{
+ if (memcmp(result_x, result_op->asym->ecdh.shared_secret.x.data,
+ result_op->asym->ecdh.shared_secret.x.length) ||
+ memcmp(result_y, result_op->asym->ecdh.shared_secret.y.data,
+ result_op->asym->ecdh.shared_secret.y.length))
+ return -1;
+
+ return 0;
+}
#endif /* TEST_CRYPTODEV_ASYM_TEST_UTIL_H__ */
diff --git a/app/test/test_cryptodev_ecdh_test_vectors.h b/app/test/test_cryptodev_ecdh_test_vectors.h
new file mode 100644
index 0000000000..5f22fbddcb
--- /dev/null
+++ b/app/test/test_cryptodev_ecdh_test_vectors.h
@@ -0,0 +1,577 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C) 2023 Marvell International Ltd.
+ */
+
+#ifndef __TEST_CRYPTODEV_ECDH_TEST_VECTORS_H__
+#define __TEST_CRYPTODEV_ECDH_TEST_VECTORS_H__
+
+#include "rte_crypto_asym.h"
+
+#ifndef __TEST_CRYPTODEV_EC_CURVES__
+#define __TEST_CRYPTODEV_EC_CURVES__
+/* EC curve id */
+enum curve {
+ SECP192R1,
+ SECP224R1,
+ SECP256R1,
+ SECP384R1,
+ SECP521R1,
+ END_OF_CURVE_LIST
+};
+
+const char *curve[] = {
+ "SECP192R1",
+ "SECP224R1",
+ "SECP256R1",
+ "SECP384R1",
+ "SECP521R1"
+};
+#endif
+
+struct crypto_testsuite_ecdh_params {
+ rte_crypto_param pubkey_qA_x;
+ rte_crypto_param pubkey_qA_y;
+ rte_crypto_param pkey_A;
+ rte_crypto_param pubkey_qB_x;
+ rte_crypto_param pubkey_qB_y;
+ rte_crypto_param pkey_B;
+ rte_crypto_param secret_x;
+ rte_crypto_param secret_y;
+ int curve;
+};
+
+/*
+ * Test vector reference:
+ * https://datatracker.ietf.org/doc/html/rfc5114.html
+ * Appendix A.
+ */
+
+/** SECP192R1 (P-192 NIST) test vector */
+
+static uint8_t dA_secp192r1[] = {
+ 0x32, 0x3F, 0xA3, 0x16, 0x9D, 0x8E, 0x9C, 0x65,
+ 0x93, 0xF5, 0x94, 0x76, 0xBC, 0x14, 0x20, 0x00,
+ 0xAB, 0x5B, 0xE0, 0xE2, 0x49, 0xC4, 0x34, 0x26
+};
+
+static uint8_t x_qA_secp192r1[] = {
+ 0xCD, 0x46, 0x48, 0x9E, 0xCF, 0xD6, 0xC1, 0x05,
+ 0xE7, 0xB3, 0xD3, 0x25, 0x66, 0xE2, 0xB1, 0x22,
+ 0xE2, 0x49, 0xAB, 0xAA, 0xDD, 0x87, 0x06, 0x12
+};
+
+static uint8_t y_qA_secp192r1[] = {
+ 0x68, 0x88, 0x7B, 0x48, 0x77, 0xDF, 0x51, 0xDD,
+ 0x4D, 0xC3, 0xD6, 0xFD, 0x11, 0xF0, 0xA2, 0x6F,
+ 0x8F, 0xD3, 0x84, 0x43, 0x17, 0x91, 0x6E, 0x9A
+};
+
+static uint8_t dB_secp192r1[] = {
+ 0x63, 0x1F, 0x95, 0xBB, 0x4A, 0x67, 0x63, 0x2C,
+ 0x9C, 0x47, 0x6E, 0xEE, 0x9A, 0xB6, 0x95, 0xAB,
+ 0x24, 0x0A, 0x04, 0x99, 0x30, 0x7F, 0xCF, 0x62
+};
+
+static uint8_t x_qB_secp192r1[] = {
+ 0x51, 0x9A, 0x12, 0x16, 0x80, 0xE0, 0x04, 0x54,
+ 0x66, 0xBA, 0x21, 0xDF, 0x2E, 0xEE, 0x47, 0xF5,
+ 0x97, 0x3B, 0x50, 0x05, 0x77, 0xEF, 0x13, 0xD5
+};
+
+static uint8_t y_qB_secp192r1[] = {
+ 0xFF, 0x61, 0x3A, 0xB4, 0xD6, 0x4C, 0xEE, 0x3A,
+ 0x20, 0x87, 0x5B, 0xDB, 0x10, 0xF9, 0x53, 0xF6,
+ 0xB3, 0x0C, 0xA0, 0x72, 0xC6, 0x0A, 0xA5, 0x7F
+};
+
+static uint8_t x_Z_secp192r1[] = {
+ 0xAD, 0x42, 0x01, 0x82, 0x63, 0x3F, 0x85, 0x26,
+ 0xBF, 0xE9, 0x54, 0xAC, 0xDA, 0x37, 0x6F, 0x05,
+ 0xE5, 0xFF, 0x4F, 0x83, 0x7F, 0x54, 0xFE, 0xBE
+};
+
+static uint8_t y_Z_secp192r1[] = {
+ 0x43, 0x71, 0x54, 0x5E, 0xD7, 0x72, 0xA5, 0x97,
+ 0x41, 0xD0, 0xED, 0xA3, 0x2C, 0x67, 0x11, 0x12,
+ 0xB7, 0xFD, 0xDD, 0x51, 0x46, 0x1F, 0xCF, 0x32
+};
+
+/** ECDH SECP192R1 elliptic curve param */
+
+struct crypto_testsuite_ecdh_params ecdh_param_secp192r1 = {
+ .pubkey_qA_x = {
+ .data = x_qA_secp192r1,
+ .length = sizeof(x_qA_secp192r1),
+ },
+ .pubkey_qA_y = {
+ .data = y_qA_secp192r1,
+ .length = sizeof(y_qA_secp192r1),
+ },
+ .pubkey_qB_x = {
+ .data = x_qB_secp192r1,
+ .length = sizeof(x_qB_secp192r1),
+ },
+ .pubkey_qB_y = {
+ .data = y_qB_secp192r1,
+ .length = sizeof(y_qB_secp192r1),
+ },
+ .pkey_A = {
+ .data = dA_secp192r1,
+ .length = sizeof(dA_secp192r1),
+ },
+ .pkey_B = {
+ .data = dB_secp192r1,
+ .length = sizeof(dB_secp192r1),
+ },
+ .secret_x = {
+ .data = x_Z_secp192r1,
+ .length = sizeof(x_Z_secp192r1),
+ },
+ .secret_y = {
+ .data = y_Z_secp192r1,
+ .length = sizeof(y_Z_secp192r1),
+ },
+ .curve = RTE_CRYPTO_EC_GROUP_SECP192R1
+};
+
+/** SECP224R1 (P-224 NIST) test vector */
+
+static uint8_t dA_secp224r1[] = {
+ 0xB5, 0x58, 0xEB, 0x6C, 0x28, 0x8D, 0xA7, 0x07,
+ 0xBB, 0xB4, 0xF8, 0xFB, 0xAE, 0x2A, 0xB9, 0xE9,
+ 0xCB, 0x62, 0xE3, 0xBC, 0x5C, 0x75, 0x73, 0xE2,
+ 0x2E, 0x26, 0xD3, 0x7F
+};
+
+static uint8_t x_qA_secp224r1[] = {
+ 0x49, 0xDF, 0xEF, 0x30, 0x9F, 0x81, 0x48, 0x8C,
+ 0x30, 0x4C, 0xFF, 0x5A, 0xB3, 0xEE, 0x5A, 0x21,
+ 0x54, 0x36, 0x7D, 0xC7, 0x83, 0x31, 0x50, 0xE0,
+ 0xA5, 0x1F, 0x3E, 0xEB
+};
+
+static uint8_t y_qA_secp224r1[] = {
+ 0x4F, 0x2B, 0x5E, 0xE4, 0x57, 0x62, 0xC4, 0xF6,
+ 0x54, 0xC1, 0xA0, 0xC6, 0x7F, 0x54, 0xCF, 0x88,
+ 0xB0, 0x16, 0xB5, 0x1B, 0xCE, 0x3D, 0x7C, 0x22,
+ 0x8D, 0x57, 0xAD, 0xB4,
+};
+
+static uint8_t dB_secp224r1[] = {
+ 0xAC, 0x3B, 0x1A, 0xDD, 0x3D, 0x97, 0x70, 0xE6,
+ 0xF6, 0xA7, 0x08, 0xEE, 0x9F, 0x3B, 0x8E, 0x0A,
+ 0xB3, 0xB4, 0x80, 0xE9, 0xF2, 0x7F, 0x85, 0xC8,
+ 0x8B, 0x5E, 0x6D, 0x18,
+};
+
+static uint8_t x_qB_secp224r1[] = {
+ 0x6B, 0x3A, 0xC9, 0x6A, 0x8D, 0x0C, 0xDE, 0x6A,
+ 0x55, 0x99, 0xBE, 0x80, 0x32, 0xED, 0xF1, 0x0C,
+ 0x16, 0x2D, 0x0A, 0x8A, 0xD2, 0x19, 0x50, 0x6D,
+ 0xCD, 0x42, 0xA2, 0x07,
+};
+
+static uint8_t y_qB_secp224r1[] = {
+ 0xD4, 0x91, 0xBE, 0x99, 0xC2, 0x13, 0xA7, 0xD1,
+ 0xCA, 0x37, 0x06, 0xDE, 0xBF, 0xE3, 0x05, 0xF3,
+ 0x61, 0xAF, 0xCB, 0xB3, 0x3E, 0x26, 0x09, 0xC8,
+ 0xB1, 0x61, 0x8A, 0xD5
+};
+
+static uint8_t x_Z_secp224r1[] = {
+ 0x52, 0x27, 0x2F, 0x50, 0xF4, 0x6F, 0x4E, 0xDC,
+ 0x91, 0x51, 0x56, 0x90, 0x92, 0xF4, 0x6D, 0xF2,
+ 0xD9, 0x6E, 0xCC, 0x3B, 0x6D, 0xC1, 0x71, 0x4A,
+ 0x4E, 0xA9, 0x49, 0xFA
+};
+
+static uint8_t y_Z_secp224r1[] = {
+ 0x5F, 0x30, 0xC6, 0xAA, 0x36, 0xDD, 0xC4, 0x03,
+ 0xC0, 0xAC, 0xB7, 0x12, 0xBB, 0x88, 0xF1, 0x76,
+ 0x3C, 0x30, 0x46, 0xF6, 0xD9, 0x19, 0xBD, 0x9C,
+ 0x52, 0x43, 0x22, 0xBF
+};
+
+/** ECDH SECP224R1 elliptic curve param */
+
+struct crypto_testsuite_ecdh_params ecdh_param_secp224r1 = {
+ .pubkey_qA_x = {
+ .data = x_qA_secp224r1,
+ .length = sizeof(x_qA_secp224r1),
+ },
+ .pubkey_qA_y = {
+ .data = y_qA_secp224r1,
+ .length = sizeof(y_qA_secp224r1),
+ },
+ .pubkey_qB_x = {
+ .data = x_qB_secp224r1,
+ .length = sizeof(x_qB_secp224r1),
+ },
+ .pubkey_qB_y = {
+ .data = y_qB_secp224r1,
+ .length = sizeof(y_qB_secp224r1),
+ },
+ .pkey_A = {
+ .data = dA_secp224r1,
+ .length = sizeof(dA_secp224r1),
+ },
+ .pkey_B = {
+ .data = dB_secp224r1,
+ .length = sizeof(dB_secp224r1),
+ },
+ .secret_x = {
+ .data = x_Z_secp224r1,
+ .length = sizeof(x_Z_secp224r1),
+ },
+ .secret_y = {
+ .data = y_Z_secp224r1,
+ .length = sizeof(y_Z_secp224r1),
+ },
+ .curve = RTE_CRYPTO_EC_GROUP_SECP224R1
+};
+
+/** SECP256R1 (P-256 NIST) test vector */
+
+static uint8_t dA_secp256r1[] = {
+ 0x81, 0x42, 0x64, 0x14, 0x5F, 0x2F, 0x56, 0xF2,
+ 0xE9, 0x6A, 0x8E, 0x33, 0x7A, 0x12, 0x84, 0x99,
+ 0x3F, 0xAF, 0x43, 0x2A, 0x5A, 0xBC, 0xE5, 0x9E,
+ 0x86, 0x7B, 0x72, 0x91, 0xD5, 0x07, 0xA3, 0xAF
+};
+
+static uint8_t x_qA_secp256r1[] = {
+ 0x2A, 0xF5, 0x02, 0xF3, 0xBE, 0x89, 0x52, 0xF2,
+ 0xC9, 0xB5, 0xA8, 0xD4, 0x16, 0x0D, 0x09, 0xE9,
+ 0x71, 0x65, 0xBE, 0x50, 0xBC, 0x42, 0xAE, 0x4A,
+ 0x5E, 0x8D, 0x3B, 0x4B, 0xA8, 0x3A, 0xEB, 0x15
+};
+
+static uint8_t y_qA_secp256r1[] = {
+ 0xEB, 0x0F, 0xAF, 0x4C, 0xA9, 0x86, 0xC4, 0xD3,
+ 0x86, 0x81, 0xA0, 0xF9, 0x87, 0x2D, 0x79, 0xD5,
+ 0x67, 0x95, 0xBD, 0x4B, 0xFF, 0x6E, 0x6D, 0xE3,
+ 0xC0, 0xF5, 0x01, 0x5E, 0xCE, 0x5E, 0xFD, 0x85
+};
+
+static uint8_t dB_secp256r1[] = {
+ 0x2C, 0xE1, 0x78, 0x8E, 0xC1, 0x97, 0xE0, 0x96,
+ 0xDB, 0x95, 0xA2, 0x00, 0xCC, 0x0A, 0xB2, 0x6A,
+ 0x19, 0xCE, 0x6B, 0xCC, 0xAD, 0x56, 0x2B, 0x8E,
+ 0xEE, 0x1B, 0x59, 0x37, 0x61, 0xCF, 0x7F, 0x41
+};
+
+static uint8_t x_qB_secp256r1[] = {
+ 0xB1, 0x20, 0xDE, 0x4A, 0xA3, 0x64, 0x92, 0x79,
+ 0x53, 0x46, 0xE8, 0xDE, 0x6C, 0x2C, 0x86, 0x46,
+ 0xAE, 0x06, 0xAA, 0xEA, 0x27, 0x9F, 0xA7, 0x75,
+ 0xB3, 0xAB, 0x07, 0x15, 0xF6, 0xCE, 0x51, 0xB0
+};
+
+static uint8_t y_qB_secp256r1[] = {
+ 0x9F, 0x1B, 0x7E, 0xEC, 0xE2, 0x0D, 0x7B, 0x5E,
+ 0xD8, 0xEC, 0x68, 0x5F, 0xA3, 0xF0, 0x71, 0xD8,
+ 0x37, 0x27, 0x02, 0x70, 0x92, 0xA8, 0x41, 0x13,
+ 0x85, 0xC3, 0x4D, 0xDE, 0x57, 0x08, 0xB2, 0xB6
+};
+
+static uint8_t x_Z_secp256r1[] = {
+ 0xDD, 0x0F, 0x53, 0x96, 0x21, 0x9D, 0x1E, 0xA3,
+ 0x93, 0x31, 0x04, 0x12, 0xD1, 0x9A, 0x08, 0xF1,
+ 0xF5, 0x81, 0x1E, 0x9D, 0xC8, 0xEC, 0x8E, 0xEA,
+ 0x7F, 0x80, 0xD2, 0x1C, 0x82, 0x0C, 0x27, 0x88
+};
+
+static uint8_t y_Z_secp256r1[] = {
+ 0x03, 0x57, 0xDC, 0xCD, 0x4C, 0x80, 0x4D, 0x0D,
+ 0x8D, 0x33, 0xAA, 0x42, 0xB8, 0x48, 0x83, 0x4A,
+ 0xA5, 0x60, 0x5F, 0x9A, 0xB0, 0xD3, 0x72, 0x39,
+ 0xA1, 0x15, 0xBB, 0xB6, 0x47, 0x93, 0x6F, 0x50
+};
+
+/** ECDH SECP256R1 elliptic curve param */
+
+struct crypto_testsuite_ecdh_params ecdh_param_secp256r1 = {
+ .pubkey_qA_x = {
+ .data = x_qA_secp256r1,
+ .length = sizeof(x_qA_secp256r1),
+ },
+ .pubkey_qA_y = {
+ .data = y_qA_secp256r1,
+ .length = sizeof(y_qA_secp256r1),
+ },
+ .pubkey_qB_x = {
+ .data = x_qB_secp256r1,
+ .length = sizeof(x_qB_secp256r1),
+ },
+ .pubkey_qB_y = {
+ .data = y_qB_secp256r1,
+ .length = sizeof(y_qB_secp256r1),
+ },
+ .pkey_A = {
+ .data = dA_secp256r1,
+ .length = sizeof(dA_secp256r1),
+ },
+ .pkey_B = {
+ .data = dB_secp256r1,
+ .length = sizeof(dB_secp256r1),
+ },
+ .secret_x = {
+ .data = x_Z_secp256r1,
+ .length = sizeof(x_Z_secp256r1),
+ },
+ .secret_y = {
+ .data = y_Z_secp256r1,
+ .length = sizeof(y_Z_secp256r1),
+ },
+ .curve = RTE_CRYPTO_EC_GROUP_SECP256R1
+};
+
+/** SECP384R1 (P-384 NIST) test vector */
+
+static uint8_t dA_secp384r1[] = {
+ 0xD2, 0x73, 0x35, 0xEA, 0x71, 0x66, 0x4A, 0xF2,
+ 0x44, 0xDD, 0x14, 0xE9, 0xFD, 0x12, 0x60, 0x71,
+ 0x5D, 0xFD, 0x8A, 0x79, 0x65, 0x57, 0x1C, 0x48,
+ 0xD7, 0x09, 0xEE, 0x7A, 0x79, 0x62, 0xA1, 0x56,
+ 0xD7, 0x06, 0xA9, 0x0C, 0xBC, 0xB5, 0xDF, 0x29,
+ 0x86, 0xF0, 0x5F, 0xEA, 0xDB, 0x93, 0x76, 0xF1
+};
+
+static uint8_t x_qA_secp384r1[] = {
+ 0x79, 0x31, 0x48, 0xF1, 0x78, 0x76, 0x34, 0xD5,
+ 0xDA, 0x4C, 0x6D, 0x90, 0x74, 0x41, 0x7D, 0x05,
+ 0xE0, 0x57, 0xAB, 0x62, 0xF8, 0x20, 0x54, 0xD1,
+ 0x0E, 0xE6, 0xB0, 0x40, 0x3D, 0x62, 0x79, 0x54,
+ 0x7E, 0x6A, 0x8E, 0xA9, 0xD1, 0xFD, 0x77, 0x42,
+ 0x7D, 0x01, 0x6F, 0xE2, 0x7A, 0x8B, 0x8C, 0x66
+};
+
+static uint8_t y_qA_secp384r1[] = {
+ 0xC6, 0xC4, 0x12, 0x94, 0x33, 0x1D, 0x23, 0xE6,
+ 0xF4, 0x80, 0xF4, 0xFB, 0x4C, 0xD4, 0x05, 0x04,
+ 0xC9, 0x47, 0x39, 0x2E, 0x94, 0xF4, 0xC3, 0xF0,
+ 0x6B, 0x8F, 0x39, 0x8B, 0xB2, 0x9E, 0x42, 0x36,
+ 0x8F, 0x7A, 0x68, 0x59, 0x23, 0xDE, 0x3B, 0x67,
+ 0xBA, 0xCE, 0xD2, 0x14, 0xA1, 0xA1, 0xD1, 0x28
+};
+
+static uint8_t dB_secp384r1[] = {
+ 0x52, 0xD1, 0x79, 0x1F, 0xDB, 0x4B, 0x70, 0xF8,
+ 0x9C, 0x0F, 0x00, 0xD4, 0x56, 0xC2, 0xF7, 0x02,
+ 0x3B, 0x61, 0x25, 0x26, 0x2C, 0x36, 0xA7, 0xDF,
+ 0x1F, 0x80, 0x23, 0x11, 0x21, 0xCC, 0xE3, 0xD3,
+ 0x9B, 0xE5, 0x2E, 0x00, 0xC1, 0x94, 0xA4, 0x13,
+ 0x2C, 0x4A, 0x6C, 0x76, 0x8B, 0xCD, 0x94, 0xD2
+};
+
+static uint8_t x_qB_secp384r1[] = {
+ 0x5C, 0xD4, 0x2A, 0xB9, 0xC4, 0x1B, 0x53, 0x47,
+ 0xF7, 0x4B, 0x8D, 0x4E, 0xFB, 0x70, 0x8B, 0x3D,
+ 0x5B, 0x36, 0xDB, 0x65, 0x91, 0x53, 0x59, 0xB4,
+ 0x4A, 0xBC, 0x17, 0x64, 0x7B, 0x6B, 0x99, 0x99,
+ 0x78, 0x9D, 0x72, 0xA8, 0x48, 0x65, 0xAE, 0x2F,
+ 0x22, 0x3F, 0x12, 0xB5, 0xA1, 0xAB, 0xC1, 0x20
+};
+
+static uint8_t y_qB_secp384r1[] = {
+ 0xE1, 0x71, 0x45, 0x8F, 0xEA, 0xA9, 0x39, 0xAA,
+ 0xA3, 0xA8, 0xBF, 0xAC, 0x46, 0xB4, 0x04, 0xBD,
+ 0x8F, 0x6D, 0x5B, 0x34, 0x8C, 0x0F, 0xA4, 0xD8,
+ 0x0C, 0xEC, 0xA1, 0x63, 0x56, 0xCA, 0x93, 0x32,
+ 0x40, 0xBD, 0xE8, 0x72, 0x34, 0x15, 0xA8, 0xEC,
+ 0xE0, 0x35, 0xB0, 0xED, 0xF3, 0x67, 0x55, 0xDE
+};
+
+static uint8_t x_Z_secp384r1[] = {
+ 0x5E, 0xA1, 0xFC, 0x4A, 0xF7, 0x25, 0x6D, 0x20,
+ 0x55, 0x98, 0x1B, 0x11, 0x05, 0x75, 0xE0, 0xA8,
+ 0xCA, 0xE5, 0x31, 0x60, 0x13, 0x7D, 0x90, 0x4C,
+ 0x59, 0xD9, 0x26, 0xEB, 0x1B, 0x84, 0x56, 0xE4,
+ 0x27, 0xAA, 0x8A, 0x45, 0x40, 0x88, 0x4C, 0x37,
+ 0xDE, 0x15, 0x9A, 0x58, 0x02, 0x8A, 0xBC, 0x0E
+};
+
+static uint8_t y_Z_secp384r1[] = {
+ 0x0C, 0xC5, 0x9E, 0x4B, 0x04, 0x64, 0x14, 0xA8,
+ 0x1C, 0x8A, 0x3B, 0xDF, 0xDC, 0xA9, 0x25, 0x26,
+ 0xC4, 0x87, 0x69, 0xDD, 0x8D, 0x31, 0x27, 0xCA,
+ 0xA9, 0x9B, 0x36, 0x32, 0xD1, 0x91, 0x39, 0x42,
+ 0xDE, 0x36, 0x2E, 0xAF, 0xAA, 0x96, 0x23, 0x79,
+ 0x37, 0x4D, 0x9F, 0x3F, 0x06, 0x68, 0x41, 0xCA
+};
+
+/** ECDH SECP384R1 elliptic curve param */
+
+struct crypto_testsuite_ecdh_params ecdh_param_secp384r1 = {
+ .pubkey_qA_x = {
+ .data = x_qA_secp384r1,
+ .length = sizeof(x_qA_secp384r1),
+ },
+ .pubkey_qA_y = {
+ .data = y_qA_secp384r1,
+ .length = sizeof(y_qA_secp384r1),
+ },
+ .pubkey_qB_x = {
+ .data = x_qB_secp384r1,
+ .length = sizeof(x_qB_secp384r1),
+ },
+ .pubkey_qB_y = {
+ .data = y_qB_secp384r1,
+ .length = sizeof(y_qB_secp384r1),
+ },
+ .pkey_A = {
+ .data = dA_secp384r1,
+ .length = sizeof(dA_secp384r1),
+ },
+ .pkey_B = {
+ .data = dB_secp384r1,
+ .length = sizeof(dB_secp384r1),
+ },
+ .secret_x = {
+ .data = x_Z_secp384r1,
+ .length = sizeof(x_Z_secp384r1),
+ },
+ .secret_y = {
+ .data = y_Z_secp384r1,
+ .length = sizeof(y_Z_secp384r1),
+ },
+ .curve = RTE_CRYPTO_EC_GROUP_SECP384R1
+};
+
+/** SECP521R1 (P-521 NIST) test vector */
+
+static uint8_t dA_secp521r1[] = {
+ 0x01, 0x13, 0xF8, 0x2D, 0xA8, 0x25, 0x73, 0x5E,
+ 0x3D, 0x97, 0x27, 0x66, 0x83, 0xB2, 0xB7, 0x42,
+ 0x77, 0xBA, 0xD2, 0x73, 0x35, 0xEA, 0x71, 0x66,
+ 0x4A, 0xF2, 0x43, 0x0C, 0xC4, 0xF3, 0x34, 0x59,
+ 0xB9, 0x66, 0x9E, 0xE7, 0x8B, 0x3F, 0xFB, 0x9B,
+ 0x86, 0x83, 0x01, 0x5D, 0x34, 0x4D, 0xCB, 0xFE,
+ 0xF6, 0xFB, 0x9A, 0xF4, 0xC6, 0xC4, 0x70, 0xBE,
+ 0x25, 0x45, 0x16, 0xCD, 0x3C, 0x1A, 0x1F, 0xB4,
+ 0x73, 0x62
+};
+
+static uint8_t x_qA_secp521r1[] = {
+ 0x01, 0xEB, 0xB3, 0x4D, 0xD7, 0x57, 0x21, 0xAB,
+ 0xF8, 0xAD, 0xC9, 0xDB, 0xED, 0x17, 0x88, 0x9C,
+ 0xBB, 0x97, 0x65, 0xD9, 0x0A, 0x7C, 0x60, 0xF2,
+ 0xCE, 0xF0, 0x07, 0xBB, 0x0F, 0x2B, 0x26, 0xE1,
+ 0x48, 0x81, 0xFD, 0x44, 0x42, 0xE6, 0x89, 0xD6,
+ 0x1C, 0xB2, 0xDD, 0x04, 0x6E, 0xE3, 0x0E, 0x3F,
+ 0xFD, 0x20, 0xF9, 0xA4, 0x5B, 0xBD, 0xF6, 0x41,
+ 0x3D, 0x58, 0x3A, 0x2D, 0xBF, 0x59, 0x92, 0x4F,
+ 0xD3, 0x5C
+};
+
+static uint8_t y_qA_secp521r1[] = {
+ 0x00, 0xF6, 0xB6, 0x32, 0xD1, 0x94, 0xC0, 0x38,
+ 0x8E, 0x22, 0xD8, 0x43, 0x7E, 0x55, 0x8C, 0x55,
+ 0x2A, 0xE1, 0x95, 0xAD, 0xFD, 0x15, 0x3F, 0x92,
+ 0xD7, 0x49, 0x08, 0x35, 0x1B, 0x2F, 0x8C, 0x4E,
+ 0xDA, 0x94, 0xED, 0xB0, 0x91, 0x6D, 0x1B, 0x53,
+ 0xC0, 0x20, 0xB5, 0xEE, 0xCA, 0xED, 0x1A, 0x5F,
+ 0xC3, 0x8A, 0x23, 0x3E, 0x48, 0x30, 0x58, 0x7B,
+ 0xB2, 0xEE, 0x34, 0x89, 0xB3, 0xB4, 0x2A, 0x5A,
+ 0x86, 0xA4
+};
+
+static uint8_t dB_secp521r1[] = {
+ 0x00, 0xCE, 0xE3, 0x48, 0x0D, 0x86, 0x45, 0xA1,
+ 0x7D, 0x24, 0x9F, 0x27, 0x76, 0xD2, 0x8B, 0xAE,
+ 0x61, 0x69, 0x52, 0xD1, 0x79, 0x1F, 0xDB, 0x4B,
+ 0x70, 0xF7, 0xC3, 0x37, 0x87, 0x32, 0xAA, 0x1B,
+ 0x22, 0x92, 0x84, 0x48, 0xBC, 0xD1, 0xDC, 0x24,
+ 0x96, 0xD4, 0x35, 0xB0, 0x10, 0x48, 0x06, 0x6E,
+ 0xBE, 0x4F, 0x72, 0x90, 0x3C, 0x36, 0x1B, 0x1A,
+ 0x9D, 0xC1, 0x19, 0x3D, 0xC2, 0xC9, 0xD0, 0x89,
+ 0x1B, 0x96
+};
+
+static uint8_t x_qB_secp521r1[] = {
+ 0x01, 0x0E, 0xBF, 0xAF, 0xC6, 0xE8, 0x5E, 0x08,
+ 0xD2, 0x4B, 0xFF, 0xFC, 0xC1, 0xA4, 0x51, 0x1D,
+ 0xB0, 0xE6, 0x34, 0xBE, 0xEB, 0x1B, 0x6D, 0xEC,
+ 0x8C, 0x59, 0x39, 0xAE, 0x44, 0x76, 0x62, 0x01,
+ 0xAF, 0x62, 0x00, 0x43, 0x0B, 0xA9, 0x7C, 0x8A,
+ 0xC6, 0xA0, 0xE9, 0xF0, 0x8B, 0x33, 0xCE, 0x7E,
+ 0x9F, 0xEE, 0xB5, 0xBA, 0x4E, 0xE5, 0xE0, 0xD8,
+ 0x15, 0x10, 0xC2, 0x42, 0x95, 0xB8, 0xA0, 0x8D,
+ 0x02, 0x35
+};
+
+static uint8_t y_qB_secp521r1[] = {
+ 0x00, 0xA4, 0xA6, 0xEC, 0x30, 0x0D, 0xF9, 0xE2,
+ 0x57, 0xB0, 0x37, 0x2B, 0x5E, 0x7A, 0xBF, 0xEF,
+ 0x09, 0x34, 0x36, 0x71, 0x9A, 0x77, 0x88, 0x7E,
+ 0xBB, 0x0B, 0x18, 0xCF, 0x80, 0x99, 0xB9, 0xF4,
+ 0x21, 0x2B, 0x6E, 0x30, 0xA1, 0x41, 0x9C, 0x18,
+ 0xE0, 0x29, 0xD3, 0x68, 0x63, 0xCC, 0x9D, 0x44,
+ 0x8F, 0x4D, 0xBA, 0x4D, 0x2A, 0x0E, 0x60, 0x71,
+ 0x1B, 0xE5, 0x72, 0x91, 0x5F, 0xBD, 0x4F, 0xEF,
+ 0x26, 0x95
+};
+
+static uint8_t x_Z_secp521r1[] = {
+ 0x00, 0xCD, 0xEA, 0x89, 0x62, 0x1C, 0xFA, 0x46,
+ 0xB1, 0x32, 0xF9, 0xE4, 0xCF, 0xE2, 0x26, 0x1C,
+ 0xDE, 0x2D, 0x43, 0x68, 0xEB, 0x56, 0x56, 0x63,
+ 0x4C, 0x7C, 0xC9, 0x8C, 0x7A, 0x00, 0xCD, 0xE5,
+ 0x4E, 0xD1, 0x86, 0x6A, 0x0D, 0xD3, 0xE6, 0x12,
+ 0x6C, 0x9D, 0x2F, 0x84, 0x5D, 0xAF, 0xF8, 0x2C,
+ 0xEB, 0x1D, 0xA0, 0x8F, 0x5D, 0x87, 0x52, 0x1B,
+ 0xB0, 0xEB, 0xEC, 0xA7, 0x79, 0x11, 0x16, 0x9C,
+ 0x20, 0xCC
+};
+
+static uint8_t y_Z_secp521r1[] = {
+ 0x00, 0xF9, 0xA7, 0x16, 0x41, 0x02, 0x9B, 0x7F,
+ 0xC1, 0xA8, 0x08, 0xAD, 0x07, 0xCD, 0x48, 0x61,
+ 0xE8, 0x68, 0x61, 0x4B, 0x86, 0x5A, 0xFB, 0xEC,
+ 0xAB, 0x1F, 0x2B, 0xD4, 0xD8, 0xB5, 0x5E, 0xBC,
+ 0xB5, 0xE3, 0xA5, 0x31, 0x43, 0xCE, 0xB2, 0xC5,
+ 0x11, 0xB1, 0xAE, 0x0A, 0xF5, 0xAC, 0x82, 0x7F,
+ 0x60, 0xF2, 0xFD, 0x87, 0x25, 0x65, 0xAC, 0x5C,
+ 0xA0, 0xA1, 0x64, 0x03, 0x8F, 0xE9, 0x80, 0xA7,
+ 0xE4, 0xBD
+};
+
+/** ECDH SECP521R1 elliptic curve param */
+
+struct crypto_testsuite_ecdh_params ecdh_param_secp521r1 = {
+ .pubkey_qA_x = {
+ .data = x_qA_secp521r1,
+ .length = sizeof(x_qA_secp521r1),
+ },
+ .pubkey_qA_y = {
+ .data = y_qA_secp521r1,
+ .length = sizeof(y_qA_secp521r1),
+ },
+ .pubkey_qB_x = {
+ .data = x_qB_secp521r1,
+ .length = sizeof(x_qB_secp521r1),
+ },
+ .pubkey_qB_y = {
+ .data = y_qB_secp521r1,
+ .length = sizeof(y_qB_secp521r1),
+ },
+ .pkey_A = {
+ .data = dA_secp521r1,
+ .length = sizeof(dA_secp521r1),
+ },
+ .pkey_B = {
+ .data = dB_secp521r1,
+ .length = sizeof(dB_secp521r1),
+ },
+ .secret_x = {
+ .data = x_Z_secp521r1,
+ .length = sizeof(x_Z_secp521r1),
+ },
+ .secret_y = {
+ .data = y_Z_secp521r1,
+ .length = sizeof(y_Z_secp521r1),
+ },
+ .curve = RTE_CRYPTO_EC_GROUP_SECP521R1
+};
+
+#endif /* __TEST_CRYPTODEV_ECDSA_TEST_VECTORS_H__ */
diff --git a/app/test/test_cryptodev_ecdsa_test_vectors.h b/app/test/test_cryptodev_ecdsa_test_vectors.h
index 55fbda5979..9ac3189ce7 100644
--- a/app/test/test_cryptodev_ecdsa_test_vectors.h
+++ b/app/test/test_cryptodev_ecdsa_test_vectors.h
@@ -7,6 +7,8 @@
#include "rte_crypto_asym.h"
+#ifndef __TEST_CRYPTODEV_EC_CURVES__
+#define __TEST_CRYPTODEV_EC_CURVES__
/* EC curve id */
enum curve {
SECP192R1,
@@ -22,6 +24,7 @@ const char *curve[] = {"SECP192R1",
"SECP256R1",
"SECP384R1",
"SECP521R1"};
+#endif
struct crypto_testsuite_ecdsa_params {
rte_crypto_param pubkey_qx;
--
2.25.1
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v1 2/4] crypto/cnxk: use generic EC opcodes
2023-10-26 8:15 [PATCH v1 0/4] test/cryptodev: add ECDH tests Gowrishankar Muthukrishnan
2023-10-26 8:15 ` [PATCH v1 1/4] " Gowrishankar Muthukrishnan
@ 2023-10-26 8:15 ` Gowrishankar Muthukrishnan
2023-10-26 8:15 ` [PATCH v1 3/4] crypto/cnxk: change order of ECFPM params Gowrishankar Muthukrishnan
2023-10-26 8:15 ` [PATCH v1 4/4] crypto/cnxk: add ECDH support Gowrishankar Muthukrishnan
3 siblings, 0 replies; 9+ messages in thread
From: Gowrishankar Muthukrishnan @ 2023-10-26 8:15 UTC (permalink / raw)
To: dev; +Cc: anoobj, Akhil Goyal, Fan Zhang, Gowrishankar Muthukrishnan
Use generic EC opcodes for sign and verify ops in ECDSA and SM2
implementations.
Signed-off-by: Gowrishankar Muthukrishnan <gmuthukrishn@marvell.com>
---
drivers/common/cnxk/roc_ae.h | 14 +++++++---
drivers/crypto/cnxk/cnxk_ae.h | 50 +++++++++++++++++++----------------
2 files changed, 38 insertions(+), 26 deletions(-)
diff --git a/drivers/common/cnxk/roc_ae.h b/drivers/common/cnxk/roc_ae.h
index d459c5e680..eaf12ab254 100644
--- a/drivers/common/cnxk/roc_ae.h
+++ b/drivers/common/cnxk/roc_ae.h
@@ -5,9 +5,11 @@
#ifndef __ROC_AE_H__
#define __ROC_AE_H__
+#include "roc_platform.h"
+
/* AE opcodes */
#define ROC_AE_MAJOR_OP_MODEX 0x03
-#define ROC_AE_MAJOR_OP_ECDSA 0x04
+#define ROC_AE_MAJOR_OP_EC 0x04
#define ROC_AE_MAJOR_OP_ECC 0x05
#define ROC_AE_MINOR_OP_MODEX 0x01
#define ROC_AE_MINOR_OP_PKCS_ENC 0x02
@@ -15,8 +17,8 @@
#define ROC_AE_MINOR_OP_PKCS_DEC 0x04
#define ROC_AE_MINOR_OP_PKCS_DEC_CRT 0x05
#define ROC_AE_MINOR_OP_MODEX_CRT 0x06
-#define ROC_AE_MINOR_OP_ECDSA_SIGN 0x01
-#define ROC_AE_MINOR_OP_ECDSA_VERIFY 0x02
+#define ROC_AE_MINOR_OP_EC_SIGN 0x01
+#define ROC_AE_MINOR_OP_EC_VERIFY 0x02
#define ROC_AE_MINOR_OP_ECC_UMP 0x03
#define ROC_AE_MINOR_OP_ECC_FPM 0x04
@@ -38,6 +40,12 @@ typedef enum {
ROC_AE_EC_ID_PMAX
} roc_ae_ec_id;
+/* EC param1 fields */
+#define ROC_AE_EC_PARAM1_ECDSA (0 << 7)
+#define ROC_AE_EC_PARAM1_SM2 (1 << 7)
+#define ROC_AE_EC_PARAM1_NIST (0 << 6)
+#define ROC_AE_EC_PARAM1_NONNIST (1 << 6)
+
/* Prime and order fields of built-in elliptic curves */
struct roc_ae_ec_group {
struct {
diff --git a/drivers/crypto/cnxk/cnxk_ae.h b/drivers/crypto/cnxk/cnxk_ae.h
index 09468d58b0..6e61ccb0c5 100644
--- a/drivers/crypto/cnxk/cnxk_ae.h
+++ b/drivers/crypto/cnxk/cnxk_ae.h
@@ -588,8 +588,8 @@ cnxk_ae_ecdsa_sign_prep(struct rte_crypto_ecdsa_op_param *ecdsa,
dptr += p_align;
/* Setup opcodes */
- w4.s.opcode_major = ROC_AE_MAJOR_OP_ECDSA;
- w4.s.opcode_minor = ROC_AE_MINOR_OP_ECDSA_SIGN;
+ w4.s.opcode_major = ROC_AE_MAJOR_OP_EC;
+ w4.s.opcode_minor = ROC_AE_MINOR_OP_EC_SIGN;
w4.s.param1 = curveid | (message_len << 8);
w4.s.param2 = (p_align << 8) | k_len;
@@ -683,8 +683,8 @@ cnxk_ae_ecdsa_verify_prep(struct rte_crypto_ecdsa_op_param *ecdsa,
dptr += p_align;
/* Setup opcodes */
- w4.s.opcode_major = ROC_AE_MAJOR_OP_ECDSA;
- w4.s.opcode_minor = ROC_AE_MINOR_OP_ECDSA_VERIFY;
+ w4.s.opcode_major = ROC_AE_MAJOR_OP_EC;
+ w4.s.opcode_minor = ROC_AE_MINOR_OP_EC_VERIFY;
w4.s.param1 = curveid | (message_len << 8);
w4.s.param2 = 0;
@@ -719,9 +719,9 @@ cnxk_ae_enqueue_ecdsa_op(struct rte_crypto_op *op,
static __rte_always_inline void
cnxk_ae_sm2_sign_prep(struct rte_crypto_sm2_op_param *sm2,
- struct roc_ae_buf_ptr *meta_buf,
- uint64_t fpm_table_iova, struct roc_ae_ec_group *ec_grp,
- struct cnxk_ae_sess *sess, struct cpt_inst_s *inst)
+ struct roc_ae_buf_ptr *meta_buf,
+ uint64_t fpm_table_iova, struct roc_ae_ec_group *ec_grp,
+ struct cnxk_ae_sess *sess, struct cpt_inst_s *inst)
{
uint16_t message_len = sm2->message.length;
uint16_t pkey_len = sess->ec_ctx.pkey.length;
@@ -787,10 +787,12 @@ cnxk_ae_sm2_sign_prep(struct rte_crypto_sm2_op_param *sm2,
dptr += p_align;
/* Setup opcodes */
- w4.s.opcode_major = ROC_AE_MAJOR_OP_ECDSA;
- w4.s.opcode_minor = ROC_AE_MINOR_OP_ECDSA_SIGN;
+ w4.s.opcode_major = ROC_AE_MAJOR_OP_EC;
+ w4.s.opcode_minor = ROC_AE_MINOR_OP_EC_SIGN;
- w4.s.param1 = 2 | 1 << 7 | 1 << 6 | (message_len << 8);
+ /* prime length of SM2 curve is same as that of P256. */
+ w4.s.param1 = ROC_AE_EC_ID_P256 |
+ ROC_AE_EC_PARAM1_SM2 | ROC_AE_EC_PARAM1_NONNIST | (message_len << 8);
w4.s.param2 = (p_align << 8) | k_len;
w4.s.dlen = dlen;
@@ -800,10 +802,10 @@ cnxk_ae_sm2_sign_prep(struct rte_crypto_sm2_op_param *sm2,
static __rte_always_inline void
cnxk_ae_sm2_verify_prep(struct rte_crypto_sm2_op_param *sm2,
- struct roc_ae_buf_ptr *meta_buf,
- uint64_t fpm_table_iova,
- struct roc_ae_ec_group *ec_grp, struct cnxk_ae_sess *sess,
- struct cpt_inst_s *inst)
+ struct roc_ae_buf_ptr *meta_buf,
+ uint64_t fpm_table_iova,
+ struct roc_ae_ec_group *ec_grp, struct cnxk_ae_sess *sess,
+ struct cpt_inst_s *inst)
{
uint32_t message_len = sm2->message.length;
uint16_t o_offset, r_offset, s_offset;
@@ -881,10 +883,12 @@ cnxk_ae_sm2_verify_prep(struct rte_crypto_sm2_op_param *sm2,
dptr += p_align;
/* Setup opcodes */
- w4.s.opcode_major = ROC_AE_MAJOR_OP_ECDSA;
- w4.s.opcode_minor = ROC_AE_MINOR_OP_ECDSA_VERIFY;
+ w4.s.opcode_major = ROC_AE_MAJOR_OP_EC;
+ w4.s.opcode_minor = ROC_AE_MINOR_OP_EC_VERIFY;
- w4.s.param1 = 2 | 1 << 7 | 1 << 6 | (message_len << 8);
+ /* prime length of SM2 curve is same as that of P256. */
+ w4.s.param1 = ROC_AE_EC_ID_P256 |
+ ROC_AE_EC_PARAM1_SM2 | ROC_AE_EC_PARAM1_NONNIST | (message_len << 8);
w4.s.param2 = 0;
w4.s.dlen = dlen;
@@ -894,20 +898,20 @@ cnxk_ae_sm2_verify_prep(struct rte_crypto_sm2_op_param *sm2,
static __rte_always_inline int __rte_hot
cnxk_ae_enqueue_sm2_op(struct rte_crypto_op *op,
- struct roc_ae_buf_ptr *meta_buf,
- struct cnxk_ae_sess *sess, uint64_t *fpm_iova,
- struct roc_ae_ec_group **ec_grp,
- struct cpt_inst_s *inst)
+ struct roc_ae_buf_ptr *meta_buf,
+ struct cnxk_ae_sess *sess, uint64_t *fpm_iova,
+ struct roc_ae_ec_group **ec_grp,
+ struct cpt_inst_s *inst)
{
struct rte_crypto_sm2_op_param *sm2 = &op->asym->sm2;
uint8_t curveid = sess->ec_ctx.curveid;
if (sm2->op_type == RTE_CRYPTO_ASYM_OP_SIGN)
cnxk_ae_sm2_sign_prep(sm2, meta_buf, fpm_iova[curveid],
- ec_grp[curveid], sess, inst);
+ ec_grp[curveid], sess, inst);
else if (sm2->op_type == RTE_CRYPTO_ASYM_OP_VERIFY)
cnxk_ae_sm2_verify_prep(sm2, meta_buf, fpm_iova[curveid],
- ec_grp[curveid], sess, inst);
+ ec_grp[curveid], sess, inst);
else {
op->status = RTE_CRYPTO_OP_STATUS_INVALID_ARGS;
return -EINVAL;
--
2.25.1
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v1 3/4] crypto/cnxk: change order of ECFPM params
2023-10-26 8:15 [PATCH v1 0/4] test/cryptodev: add ECDH tests Gowrishankar Muthukrishnan
2023-10-26 8:15 ` [PATCH v1 1/4] " Gowrishankar Muthukrishnan
2023-10-26 8:15 ` [PATCH v1 2/4] crypto/cnxk: use generic EC opcodes Gowrishankar Muthukrishnan
@ 2023-10-26 8:15 ` Gowrishankar Muthukrishnan
2023-10-26 8:15 ` [PATCH v1 4/4] crypto/cnxk: add ECDH support Gowrishankar Muthukrishnan
3 siblings, 0 replies; 9+ messages in thread
From: Gowrishankar Muthukrishnan @ 2023-10-26 8:15 UTC (permalink / raw)
To: dev; +Cc: anoobj, Akhil Goyal, Fan Zhang, Gowrishankar Muthukrishnan
Change order of ECFPM params to match changes in v2.0 microcode.
Signed-off-by: Gowrishankar Muthukrishnan <gmuthukrishn@marvell.com>
---
drivers/crypto/cnxk/cnxk_ae.h | 49 ++++++++++++++---------------------
1 file changed, 20 insertions(+), 29 deletions(-)
diff --git a/drivers/crypto/cnxk/cnxk_ae.h b/drivers/crypto/cnxk/cnxk_ae.h
index 6e61ccb0c5..f05ae4f4a1 100644
--- a/drivers/crypto/cnxk/cnxk_ae.h
+++ b/drivers/crypto/cnxk/cnxk_ae.h
@@ -923,7 +923,7 @@ static __rte_always_inline int
cnxk_ae_ecfpm_prep(struct rte_crypto_ecpm_op_param *ecpm,
struct roc_ae_buf_ptr *meta_buf, uint64_t *fpm_iova,
struct roc_ae_ec_group *ec_grp, uint8_t curveid,
- struct cpt_inst_s *inst, int cpt_ver)
+ struct cpt_inst_s *inst)
{
uint16_t scalar_align, p_align;
uint16_t dlen, prime_len;
@@ -942,34 +942,26 @@ cnxk_ae_ecfpm_prep(struct rte_crypto_ecpm_op_param *ecpm,
scalar_align = RTE_ALIGN_CEIL(ecpm->scalar.length, 8);
/*
- * Set dlen = sum(prime, scalar length, table address and
- * optionally ROUNDUP8(input point(x and y coordinates)).
+ * Set dlen = sum(ROUNDUP8(input point(x and y coordinates), prime,
+ * scalar length),
* Please note point length is equivalent to prime of the curve
*/
- if (cpt_ver == ROC_CPT_REVISION_ID_96XX_B0 || cpt_ver == ROC_CPT_REVISION_ID_96XX_C0 ||
- cpt_ver == ROC_CPT_REVISION_ID_98XX) {
- dlen = sizeof(fpm_table_iova) + 3 * p_align + scalar_align;
- memset(dptr, 0, dlen);
- *(uint64_t *)dptr = fpm_table_iova;
- dptr += sizeof(fpm_table_iova);
- memcpy(dptr, ecpm->scalar.data, ecpm->scalar.length);
- dptr += scalar_align;
- memcpy(dptr, ec_grp->prime.data, ec_grp->prime.length);
- dptr += p_align;
- memcpy(dptr, ec_grp->consta.data, ec_grp->consta.length);
- dptr += p_align;
- memcpy(dptr, ec_grp->constb.data, ec_grp->constb.length);
- dptr += p_align;
- } else {
- dlen = sizeof(fpm_table_iova) + p_align + scalar_align;
- memset(dptr, 0, dlen);
- memcpy(dptr, ecpm->scalar.data, ecpm->scalar.length);
- dptr += scalar_align;
- memcpy(dptr, ec_grp->prime.data, ec_grp->prime.length);
- dptr += p_align;
- *(uint64_t *)dptr = fpm_table_iova;
- dptr += sizeof(fpm_table_iova);
- }
+ dlen = sizeof(fpm_table_iova) + 3 * p_align + scalar_align;
+
+ memset(dptr, 0, dlen);
+
+ *(uint64_t *)dptr = fpm_table_iova;
+ dptr += sizeof(fpm_table_iova);
+
+ /* Copy scalar, prime */
+ memcpy(dptr, ecpm->scalar.data, ecpm->scalar.length);
+ dptr += scalar_align;
+ memcpy(dptr, ec_grp->prime.data, ec_grp->prime.length);
+ dptr += p_align;
+ memcpy(dptr, ec_grp->consta.data, ec_grp->consta.length);
+ dptr += p_align;
+ memcpy(dptr, ec_grp->constb.data, ec_grp->constb.length);
+ dptr += p_align;
/* Setup opcodes */
w4.s.opcode_major = ROC_AE_MAJOR_OP_ECC;
@@ -1224,8 +1216,7 @@ cnxk_ae_enqueue(struct cnxk_cpt_qp *qp, struct rte_crypto_op *op,
ret = cnxk_ae_ecfpm_prep(&asym_op->ecpm, &meta_buf,
sess->cnxk_fpm_iova,
sess->ec_grp[sess->ec_ctx.curveid],
- sess->ec_ctx.curveid, inst,
- sess->lf->roc_cpt->cpt_revision);
+ sess->ec_ctx.curveid, inst);
if (unlikely(ret))
goto req_fail;
break;
--
2.25.1
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v1 4/4] crypto/cnxk: add ECDH support
2023-10-26 8:15 [PATCH v1 0/4] test/cryptodev: add ECDH tests Gowrishankar Muthukrishnan
` (2 preceding siblings ...)
2023-10-26 8:15 ` [PATCH v1 3/4] crypto/cnxk: change order of ECFPM params Gowrishankar Muthukrishnan
@ 2023-10-26 8:15 ` Gowrishankar Muthukrishnan
2023-10-30 18:49 ` Akhil Goyal
3 siblings, 1 reply; 9+ messages in thread
From: Gowrishankar Muthukrishnan @ 2023-10-26 8:15 UTC (permalink / raw)
To: dev; +Cc: anoobj, Akhil Goyal, Fan Zhang, Gowrishankar Muthukrishnan
Add ECDH support in CNXK PMD.
Signed-off-by: Gowrishankar Muthukrishnan <gmuthukrishn@marvell.com>
---
doc/guides/cryptodevs/features/cn10k.ini | 1 +
doc/guides/cryptodevs/features/cn9k.ini | 1 +
drivers/common/cnxk/roc_ae.h | 7 +
drivers/crypto/cnxk/cn10k_cryptodev_ops.c | 12 ++
drivers/crypto/cnxk/cnxk_ae.h | 143 ++++++++++++++++--
drivers/crypto/cnxk/cnxk_cryptodev.h | 2 +-
.../crypto/cnxk/cnxk_cryptodev_capabilities.c | 14 ++
7 files changed, 165 insertions(+), 15 deletions(-)
diff --git a/doc/guides/cryptodevs/features/cn10k.ini b/doc/guides/cryptodevs/features/cn10k.ini
index 4f542c6038..ea8a22eb46 100644
--- a/doc/guides/cryptodevs/features/cn10k.ini
+++ b/doc/guides/cryptodevs/features/cn10k.ini
@@ -102,6 +102,7 @@ DSA =
Modular Exponentiation = Y
Modular Inversion =
Diffie-hellman =
+ECDH = Y
ECDSA = Y
ECPM = Y
SM2 = Y
diff --git a/doc/guides/cryptodevs/features/cn9k.ini b/doc/guides/cryptodevs/features/cn9k.ini
index bf0e1a98b2..d70771d9bd 100644
--- a/doc/guides/cryptodevs/features/cn9k.ini
+++ b/doc/guides/cryptodevs/features/cn9k.ini
@@ -96,6 +96,7 @@ DSA =
Modular Exponentiation = Y
Modular Inversion =
Diffie-hellman =
+ECDH = Y
ECDSA = Y
ECPM = Y
diff --git a/drivers/common/cnxk/roc_ae.h b/drivers/common/cnxk/roc_ae.h
index eaf12ab254..a9a08d9fb9 100644
--- a/drivers/common/cnxk/roc_ae.h
+++ b/drivers/common/cnxk/roc_ae.h
@@ -8,9 +8,11 @@
#include "roc_platform.h"
/* AE opcodes */
+#define ROC_AE_MAJOR_OP_RANDOM 0x32
#define ROC_AE_MAJOR_OP_MODEX 0x03
#define ROC_AE_MAJOR_OP_EC 0x04
#define ROC_AE_MAJOR_OP_ECC 0x05
+#define ROC_AE_MINOR_OP_RANDOM 0x00
#define ROC_AE_MINOR_OP_MODEX 0x01
#define ROC_AE_MINOR_OP_PKCS_ENC 0x02
#define ROC_AE_MINOR_OP_PKCS_ENC_CRT 0x03
@@ -46,6 +48,11 @@ typedef enum {
#define ROC_AE_EC_PARAM1_NIST (0 << 6)
#define ROC_AE_EC_PARAM1_NONNIST (1 << 6)
+typedef enum {
+ ROC_AE_ERR_ECC_PAI = 0x0b,
+ ROC_AE_ERR_ECC_POINT_NOT_ON_CURVE = 0x11
+} roc_ae_error_code;
+
/* Prime and order fields of built-in elliptic curves */
struct roc_ae_ec_group {
struct {
diff --git a/drivers/crypto/cnxk/cn10k_cryptodev_ops.c b/drivers/crypto/cnxk/cn10k_cryptodev_ops.c
index 5f181e8839..997110e3d3 100644
--- a/drivers/crypto/cnxk/cn10k_cryptodev_ops.c
+++ b/drivers/crypto/cnxk/cn10k_cryptodev_ops.c
@@ -860,6 +860,18 @@ cn10k_cpt_dequeue_post_process(struct cnxk_cpt_qp *qp,
}
return;
+ } else if (cop->type == RTE_CRYPTO_OP_TYPE_ASYMMETRIC &&
+ cop->sess_type == RTE_CRYPTO_OP_WITH_SESSION &&
+ cop->asym->ecdh.ke_type == RTE_CRYPTO_ASYM_KE_PUB_KEY_VERIFY) {
+ if (likely(compcode == CPT_COMP_GOOD)) {
+ if (uc_compcode == ROC_AE_ERR_ECC_POINT_NOT_ON_CURVE) {
+ cop->status = RTE_CRYPTO_OP_STATUS_ERROR;
+ return;
+ } else if (uc_compcode == ROC_AE_ERR_ECC_PAI) {
+ cop->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
+ return;
+ }
+ }
}
if (likely(compcode == CPT_COMP_GOOD)) {
diff --git a/drivers/crypto/cnxk/cnxk_ae.h b/drivers/crypto/cnxk/cnxk_ae.h
index f05ae4f4a1..ea11e093bf 100644
--- a/drivers/crypto/cnxk/cnxk_ae.h
+++ b/drivers/crypto/cnxk/cnxk_ae.h
@@ -236,6 +236,7 @@ cnxk_ae_fill_session_parameters(struct cnxk_ae_sess *sess,
break;
case RTE_CRYPTO_ASYM_XFORM_ECDSA:
/* Fall through */
+ case RTE_CRYPTO_ASYM_XFORM_ECDH:
case RTE_CRYPTO_ASYM_XFORM_ECPM:
case RTE_CRYPTO_ASYM_XFORM_ECFPM:
case RTE_CRYPTO_ASYM_XFORM_SM2:
@@ -920,7 +921,7 @@ cnxk_ae_enqueue_sm2_op(struct rte_crypto_op *op,
}
static __rte_always_inline int
-cnxk_ae_ecfpm_prep(struct rte_crypto_ecpm_op_param *ecpm,
+cnxk_ae_ecfpm_prep(rte_crypto_param *scalar,
struct roc_ae_buf_ptr *meta_buf, uint64_t *fpm_iova,
struct roc_ae_ec_group *ec_grp, uint8_t curveid,
struct cpt_inst_s *inst)
@@ -939,7 +940,7 @@ cnxk_ae_ecfpm_prep(struct rte_crypto_ecpm_op_param *ecpm,
inst->dptr = (uintptr_t)dptr;
p_align = RTE_ALIGN_CEIL(prime_len, 8);
- scalar_align = RTE_ALIGN_CEIL(ecpm->scalar.length, 8);
+ scalar_align = RTE_ALIGN_CEIL(scalar->length, 8);
/*
* Set dlen = sum(ROUNDUP8(input point(x and y coordinates), prime,
@@ -954,7 +955,7 @@ cnxk_ae_ecfpm_prep(struct rte_crypto_ecpm_op_param *ecpm,
dptr += sizeof(fpm_table_iova);
/* Copy scalar, prime */
- memcpy(dptr, ecpm->scalar.data, ecpm->scalar.length);
+ memcpy(dptr, scalar->data, scalar->length);
dptr += scalar_align;
memcpy(dptr, ec_grp->prime.data, ec_grp->prime.length);
dptr += p_align;
@@ -968,7 +969,7 @@ cnxk_ae_ecfpm_prep(struct rte_crypto_ecpm_op_param *ecpm,
w4.s.opcode_minor = ROC_AE_MINOR_OP_ECC_FPM;
w4.s.param1 = curveid | (1 << 8);
- w4.s.param2 = ecpm->scalar.length;
+ w4.s.param2 = scalar->length;
w4.s.dlen = dlen;
inst->w4.u64 = w4.u64;
@@ -978,13 +979,13 @@ cnxk_ae_ecfpm_prep(struct rte_crypto_ecpm_op_param *ecpm,
}
static __rte_always_inline int
-cnxk_ae_ecpm_prep(struct rte_crypto_ecpm_op_param *ecpm,
+cnxk_ae_ecpm_prep(rte_crypto_param *scalar, struct rte_crypto_ec_point *p,
struct roc_ae_buf_ptr *meta_buf,
struct roc_ae_ec_group *ec_grp, uint8_t curveid,
struct cpt_inst_s *inst)
{
- uint16_t x1_len = ecpm->p.x.length;
- uint16_t y1_len = ecpm->p.y.length;
+ uint16_t x1_len = p->x.length;
+ uint16_t y1_len = p->y.length;
uint16_t scalar_align, p_align;
uint16_t x1_offset, y1_offset;
uint16_t dlen, prime_len;
@@ -998,7 +999,7 @@ cnxk_ae_ecpm_prep(struct rte_crypto_ecpm_op_param *ecpm,
inst->dptr = (uintptr_t)dptr;
p_align = RTE_ALIGN_CEIL(prime_len, 8);
- scalar_align = RTE_ALIGN_CEIL(ecpm->scalar.length, 8);
+ scalar_align = RTE_ALIGN_CEIL(scalar->length, 8);
/*
* Set dlen = sum(ROUNDUP8(input point(x and y coordinates), prime,
@@ -1013,11 +1014,11 @@ cnxk_ae_ecpm_prep(struct rte_crypto_ecpm_op_param *ecpm,
memset(dptr, 0, dlen);
/* Copy input point, scalar, prime */
- memcpy(dptr + x1_offset, ecpm->p.x.data, x1_len);
+ memcpy(dptr + x1_offset, p->x.data, x1_len);
dptr += p_align;
- memcpy(dptr + y1_offset, ecpm->p.y.data, y1_len);
+ memcpy(dptr + y1_offset, p->y.data, y1_len);
dptr += p_align;
- memcpy(dptr, ecpm->scalar.data, ecpm->scalar.length);
+ memcpy(dptr, scalar->data, scalar->length);
dptr += scalar_align;
memcpy(dptr, ec_grp->prime.data, ec_grp->prime.length);
dptr += p_align;
@@ -1031,7 +1032,7 @@ cnxk_ae_ecpm_prep(struct rte_crypto_ecpm_op_param *ecpm,
w4.s.opcode_minor = ROC_AE_MINOR_OP_ECC_UMP;
w4.s.param1 = curveid;
- w4.s.param2 = ecpm->scalar.length;
+ w4.s.param2 = scalar->length;
w4.s.dlen = dlen;
inst->w4.u64 = w4.u64;
@@ -1040,6 +1041,78 @@ cnxk_ae_ecpm_prep(struct rte_crypto_ecpm_op_param *ecpm,
return 0;
}
+static __rte_always_inline int
+cnxk_ae_random_prep(uint16_t len, struct roc_ae_buf_ptr *meta_buf,
+ struct cpt_inst_s *inst)
+{
+ union cpt_inst_w4 w4;
+ uint8_t *dptr;
+
+ /* Input buffer */
+ dptr = meta_buf->vaddr;
+ inst->dptr = (uintptr_t)dptr;
+
+ /* Setup opcodes */
+ w4.s.opcode_major = ROC_AE_MAJOR_OP_RANDOM;
+ w4.s.opcode_minor = ROC_AE_MINOR_OP_RANDOM;
+
+ w4.s.param1 = len;
+ w4.s.param2 = 0;
+ w4.s.dlen = 0;
+
+ inst->w4.u64 = w4.u64;
+ inst->rptr = (uintptr_t)dptr;
+
+ return 0;
+}
+
+static __rte_always_inline int __rte_hot
+cnxk_ae_enqueue_ecdh_op(struct rte_crypto_op *op,
+ struct roc_ae_buf_ptr *meta_buf,
+ struct cnxk_ae_sess *sess, uint64_t *fpm_iova,
+ struct roc_ae_ec_group **ec_grp,
+ struct cpt_inst_s *inst)
+{
+ struct rte_crypto_ecdh_op_param *ecdh = &op->asym->ecdh;
+ uint8_t curveid = sess->ec_ctx.curveid;
+ struct rte_crypto_ec_point point;
+ rte_crypto_uint scalar;
+ int ret = 0;
+
+ switch (ecdh->ke_type) {
+ case RTE_CRYPTO_ASYM_KE_PRIV_KEY_GENERATE:
+ cnxk_ae_random_prep(ecdh->priv_key.length, meta_buf, inst);
+ break;
+ case RTE_CRYPTO_ASYM_KE_PUB_KEY_GENERATE:
+ scalar.data = sess->ec_ctx.pkey.data;
+ scalar.length = sess->ec_ctx.pkey.length;
+ cnxk_ae_ecfpm_prep(&scalar, meta_buf, fpm_iova, ec_grp[curveid],
+ curveid, inst);
+ break;
+ case RTE_CRYPTO_ASYM_KE_PUB_KEY_VERIFY:
+ scalar.data = ec_grp[curveid]->order.data;
+ scalar.length = ec_grp[curveid]->order.length;
+ cnxk_ae_ecpm_prep(&scalar, &ecdh->pub_key, meta_buf,
+ ec_grp[curveid], curveid, inst);
+ break;
+ case RTE_CRYPTO_ASYM_KE_SHARED_SECRET_COMPUTE:
+ scalar.data = sess->ec_ctx.pkey.data;
+ scalar.length = sess->ec_ctx.pkey.length;
+ point.x.data = sess->ec_ctx.q.x.data;
+ point.x.length = sess->ec_ctx.q.x.length;
+ point.y.data = sess->ec_ctx.q.y.data;
+ point.y.length = sess->ec_ctx.q.y.length;
+ cnxk_ae_ecpm_prep(&scalar, &point, meta_buf,
+ ec_grp[curveid], curveid, inst);
+ break;
+ default:
+ op->status = RTE_CRYPTO_OP_STATUS_INVALID_ARGS;
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
static __rte_always_inline void
cnxk_ae_dequeue_rsa_op(struct rte_crypto_op *cop, uint8_t *rptr,
struct rte_crypto_rsa_xform *rsa_ctx)
@@ -1143,6 +1216,37 @@ cnxk_ae_dequeue_ecpm_op(struct rte_crypto_ecpm_op_param *ecpm, uint8_t *rptr,
ecpm->r.y.length = prime_len;
}
+static __rte_always_inline void
+cnxk_ae_dequeue_ecdh_op(struct rte_crypto_ecdh_op_param *ecdh, uint8_t *rptr,
+ struct roc_ae_ec_ctx *ec,
+ struct roc_ae_ec_group **ec_grp)
+{
+ int prime_len = ec_grp[ec->curveid]->prime.length;
+
+ switch (ecdh->ke_type) {
+ case RTE_CRYPTO_ASYM_KE_PRIV_KEY_GENERATE:
+ memcpy(ecdh->priv_key.data, rptr, prime_len);
+ ecdh->priv_key.length = prime_len;
+ break;
+ case RTE_CRYPTO_ASYM_KE_PUB_KEY_GENERATE:
+ memcpy(ecdh->pub_key.x.data, rptr, prime_len);
+ memcpy(ecdh->pub_key.y.data, rptr + RTE_ALIGN_CEIL(prime_len, 8), prime_len);
+ ecdh->pub_key.x.length = prime_len;
+ ecdh->pub_key.y.length = prime_len;
+ break;
+ case RTE_CRYPTO_ASYM_KE_PUB_KEY_VERIFY:
+ break;
+ case RTE_CRYPTO_ASYM_KE_SHARED_SECRET_COMPUTE:
+ memcpy(ecdh->shared_secret.x.data, rptr, prime_len);
+ memcpy(ecdh->shared_secret.y.data, rptr + RTE_ALIGN_CEIL(prime_len, 8), prime_len);
+ ecdh->shared_secret.x.length = prime_len;
+ ecdh->shared_secret.y.length = prime_len;
+ break;
+ default:
+ break;
+ }
+}
+
static __rte_always_inline void *
cnxk_ae_alloc_meta(struct roc_ae_buf_ptr *buf,
struct rte_mempool *cpt_meta_pool,
@@ -1206,20 +1310,27 @@ cnxk_ae_enqueue(struct cnxk_cpt_qp *qp, struct rte_crypto_op *op,
goto req_fail;
break;
case RTE_CRYPTO_ASYM_XFORM_ECPM:
- ret = cnxk_ae_ecpm_prep(&asym_op->ecpm, &meta_buf,
+ ret = cnxk_ae_ecpm_prep(&asym_op->ecpm.scalar, &asym_op->ecpm.p, &meta_buf,
sess->ec_grp[sess->ec_ctx.curveid],
sess->ec_ctx.curveid, inst);
if (unlikely(ret))
goto req_fail;
break;
case RTE_CRYPTO_ASYM_XFORM_ECFPM:
- ret = cnxk_ae_ecfpm_prep(&asym_op->ecpm, &meta_buf,
+ ret = cnxk_ae_ecfpm_prep(&asym_op->ecpm.scalar, &meta_buf,
sess->cnxk_fpm_iova,
sess->ec_grp[sess->ec_ctx.curveid],
sess->ec_ctx.curveid, inst);
if (unlikely(ret))
goto req_fail;
break;
+ case RTE_CRYPTO_ASYM_XFORM_ECDH:
+ ret = cnxk_ae_enqueue_ecdh_op(op, &meta_buf, sess,
+ sess->cnxk_fpm_iova,
+ sess->ec_grp, inst);
+ if (unlikely(ret))
+ goto req_fail;
+ break;
default:
op->status = RTE_CRYPTO_OP_STATUS_INVALID_ARGS;
ret = -EINVAL;
@@ -1262,6 +1373,10 @@ cnxk_ae_post_process(struct rte_crypto_op *cop, struct cnxk_ae_sess *sess,
cnxk_ae_dequeue_ecpm_op(&op->ecpm, rptr, &sess->ec_ctx,
sess->ec_grp);
break;
+ case RTE_CRYPTO_ASYM_XFORM_ECDH:
+ cnxk_ae_dequeue_ecdh_op(&op->ecdh, rptr, &sess->ec_ctx,
+ sess->ec_grp);
+ break;
default:
cop->status = RTE_CRYPTO_OP_STATUS_INVALID_ARGS;
break;
diff --git a/drivers/crypto/cnxk/cnxk_cryptodev.h b/drivers/crypto/cnxk/cnxk_cryptodev.h
index 9a321aa8c9..d0ad881f2f 100644
--- a/drivers/crypto/cnxk/cnxk_cryptodev.h
+++ b/drivers/crypto/cnxk/cnxk_cryptodev.h
@@ -10,7 +10,7 @@
#include "roc_cpt.h"
-#define CNXK_CPT_MAX_CAPS 54
+#define CNXK_CPT_MAX_CAPS 55
#define CNXK_SEC_CRYPTO_MAX_CAPS 16
#define CNXK_SEC_MAX_CAPS 9
#define CNXK_AE_EC_ID_MAX 9
diff --git a/drivers/crypto/cnxk/cnxk_cryptodev_capabilities.c b/drivers/crypto/cnxk/cnxk_cryptodev_capabilities.c
index b4864f66bf..2676b52832 100644
--- a/drivers/crypto/cnxk/cnxk_cryptodev_capabilities.c
+++ b/drivers/crypto/cnxk/cnxk_cryptodev_capabilities.c
@@ -92,6 +92,20 @@ static const struct rte_cryptodev_capabilities caps_mul[] = {
},
}
},
+ { /* ECDH */
+ .op = RTE_CRYPTO_OP_TYPE_ASYMMETRIC,
+ {.asym = {
+ .xform_capa = {
+ .xform_type = RTE_CRYPTO_ASYM_XFORM_ECDH,
+ .op_types = ((1 << RTE_CRYPTO_ASYM_KE_PRIV_KEY_GENERATE) |
+ (1 << RTE_CRYPTO_ASYM_KE_PUB_KEY_GENERATE) |
+ (1 << RTE_CRYPTO_ASYM_KE_PUB_KEY_VERIFY) |
+ (1 << RTE_CRYPTO_ASYM_KE_SHARED_SECRET_COMPUTE)
+ ),
+ }
+ },
+ }
+ },
};
static const struct rte_cryptodev_capabilities caps_sha1_sha2[] = {
--
2.25.1
^ permalink raw reply [flat|nested] 9+ messages in thread
* RE: [PATCH v1 1/4] test/cryptodev: add ECDH tests
2023-10-26 8:15 ` [PATCH v1 1/4] " Gowrishankar Muthukrishnan
@ 2023-10-30 18:48 ` Akhil Goyal
2023-11-08 13:17 ` [PATCH v2] " Gowrishankar Muthukrishnan
1 sibling, 0 replies; 9+ messages in thread
From: Akhil Goyal @ 2023-10-30 18:48 UTC (permalink / raw)
To: Gowrishankar Muthukrishnan, dev
Cc: Anoob Joseph, Fan Zhang, Gowrishankar Muthukrishnan
> Subject: [PATCH v1 1/4] test/cryptodev: add ECDH tests
>
> Add ECDH tests.
>
> Signed-off-by: Gowrishankar Muthukrishnan <gmuthukrishn@marvell.com>
> ---
Please rebase this patch.
Applied the PMD patches of this series on dpdk-next-crypto.
Send the test app patch again after rebasing on next-crypto.
Thanks.
^ permalink raw reply [flat|nested] 9+ messages in thread
* RE: [PATCH v1 4/4] crypto/cnxk: add ECDH support
2023-10-26 8:15 ` [PATCH v1 4/4] crypto/cnxk: add ECDH support Gowrishankar Muthukrishnan
@ 2023-10-30 18:49 ` Akhil Goyal
0 siblings, 0 replies; 9+ messages in thread
From: Akhil Goyal @ 2023-10-30 18:49 UTC (permalink / raw)
To: Gowrishankar Muthukrishnan, dev
Cc: Anoob Joseph, Fan Zhang, Gowrishankar Muthukrishnan
> Subject: [PATCH v1 4/4] crypto/cnxk: add ECDH support
>
> Add ECDH support in CNXK PMD.
>
> Signed-off-by: Gowrishankar Muthukrishnan <gmuthukrishn@marvell.com>
Added release notes while applying.
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v2] test/cryptodev: add ECDH tests
2023-10-26 8:15 ` [PATCH v1 1/4] " Gowrishankar Muthukrishnan
2023-10-30 18:48 ` Akhil Goyal
@ 2023-11-08 13:17 ` Gowrishankar Muthukrishnan
2023-11-09 20:24 ` Akhil Goyal
1 sibling, 1 reply; 9+ messages in thread
From: Gowrishankar Muthukrishnan @ 2023-11-08 13:17 UTC (permalink / raw)
To: dev; +Cc: anoobj, Akhil Goyal, Fan Zhang, Gowrishankar Muthukrishnan
Add ECDH tests.
Signed-off-by: Gowrishankar Muthukrishnan <gmuthukrishn@marvell.com>
Change-Id: I88099e2ba8e058fbb519a06d09ebb3ece7c7e27f
---
v2:
- rebased due to patch conflict.
---
app/test/test_cryptodev_asym.c | 741 ++++++++++++++++++++
app/test/test_cryptodev_asym_util.h | 12 +
app/test/test_cryptodev_ecdh_test_vectors.h | 556 +++++++++++++++
3 files changed, 1309 insertions(+)
create mode 100644 app/test/test_cryptodev_ecdh_test_vectors.h
diff --git a/app/test/test_cryptodev_asym.c b/app/test/test_cryptodev_asym.c
index c4f985dba0..17daf734e8 100644
--- a/app/test/test_cryptodev_asym.c
+++ b/app/test/test_cryptodev_asym.c
@@ -17,6 +17,7 @@
#include "test_cryptodev.h"
#include "test_cryptodev_dh_test_vectors.h"
#include "test_cryptodev_dsa_test_vectors.h"
+#include "test_cryptodev_ecdh_test_vectors.h"
#include "test_cryptodev_ecdsa_test_vectors.h"
#include "test_cryptodev_ecpm_test_vectors.h"
#include "test_cryptodev_mod_test_vectors.h"
@@ -1811,6 +1812,744 @@ test_ecpm_all_curve(void)
return overall_status;
}
+static int
+test_ecdh_priv_key_generate(enum curve curve_id)
+{
+ struct crypto_testsuite_params_asym *ts_params = &testsuite_params;
+ const struct rte_cryptodev_asymmetric_xform_capability *capa;
+ struct rte_mempool *sess_mpool = ts_params->session_mpool;
+ struct rte_mempool *op_mpool = ts_params->op_mpool;
+ struct rte_cryptodev_asym_capability_idx idx;
+ uint8_t dev_id = ts_params->valid_devs[0];
+ struct rte_crypto_asym_xform xform = {0};
+ struct rte_crypto_op *result_op = NULL;
+ uint8_t output_buf[TEST_DATA_SIZE];
+ struct rte_crypto_asym_op *asym_op;
+ struct rte_crypto_op *op = NULL;
+ int ret, status = TEST_SUCCESS;
+ uint16_t output_buflen = 0;
+ void *sess = NULL;
+ int curve;
+
+ /* Check ECDH capability */
+ idx.type = RTE_CRYPTO_ASYM_XFORM_ECDH;
+ capa = rte_cryptodev_asym_capability_get(dev_id, &idx);
+ if (capa == NULL)
+ return -ENOTSUP;
+
+ if (!(capa->op_types & (1 << RTE_CRYPTO_ASYM_KE_PRIV_KEY_GENERATE)))
+ return -ENOTSUP;
+
+ switch (curve_id) {
+ case SECP192R1:
+ curve = RTE_CRYPTO_EC_GROUP_SECP192R1;
+ output_buflen = 24;
+ break;
+ case SECP224R1:
+ curve = RTE_CRYPTO_EC_GROUP_SECP224R1;
+ output_buflen = 28;
+ break;
+ case SECP256R1:
+ curve = RTE_CRYPTO_EC_GROUP_SECP256R1;
+ output_buflen = 32;
+ break;
+ case SECP384R1:
+ curve = RTE_CRYPTO_EC_GROUP_SECP384R1;
+ output_buflen = 48;
+ break;
+ case SECP521R1:
+ curve = RTE_CRYPTO_EC_GROUP_SECP521R1;
+ output_buflen = 66;
+ break;
+ default:
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Unsupported curve id\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+
+ /* Setup crypto op data structure */
+ op = rte_crypto_op_alloc(op_mpool, RTE_CRYPTO_OP_TYPE_ASYMMETRIC);
+ if (op == NULL) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Failed to allocate asymmetric crypto "
+ "operation struct\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+ asym_op = op->asym;
+
+ /* Setup asym xform */
+ xform.next = NULL;
+ xform.xform_type = RTE_CRYPTO_ASYM_XFORM_ECDH;
+ xform.ec.curve_id = curve;
+
+ ret = rte_cryptodev_asym_session_create(dev_id, &xform, sess_mpool, &sess);
+ if (ret < 0) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Session creation failed\n");
+ status = (ret == -ENOTSUP) ? TEST_SKIPPED : TEST_FAILED;
+ goto exit;
+ }
+
+ /* Attach asymmetric crypto session to crypto operations */
+ rte_crypto_op_attach_asym_session(op, sess);
+
+ /* Populate op with operational details */
+ asym_op->ecdh.ke_type = RTE_CRYPTO_ASYM_KE_PRIV_KEY_GENERATE;
+
+ /* Init out buf */
+ asym_op->ecdh.priv_key.data = output_buf;
+ asym_op->ecdh.priv_key.length = output_buflen;
+
+ RTE_LOG(DEBUG, USER1, "Process ASYM operation\n");
+
+ /* Process crypto operation */
+ if (rte_cryptodev_enqueue_burst(dev_id, 0, &op, 1) != 1) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Error sending packet for operation\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+
+ while (rte_cryptodev_dequeue_burst(dev_id, 0, &result_op, 1) == 0)
+ rte_pause();
+
+ if (result_op == NULL) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Failed to process asym crypto op\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+
+ if (result_op->status != RTE_CRYPTO_OP_STATUS_SUCCESS) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Failed to process asym crypto op\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+
+ asym_op = result_op->asym;
+
+ debug_hexdump(stdout, "priv_key:",
+ asym_op->ecdh.priv_key.data, asym_op->ecdh.priv_key.length);
+
+exit:
+ if (sess != NULL)
+ rte_cryptodev_asym_session_free(dev_id, sess);
+ rte_crypto_op_free(op);
+ return status;
+}
+
+static int
+test_ecdh_pub_key_generate(enum curve curve_id)
+{
+ struct crypto_testsuite_params_asym *ts_params = &testsuite_params;
+ const struct rte_cryptodev_asymmetric_xform_capability *capa;
+ struct rte_mempool *sess_mpool = ts_params->session_mpool;
+ struct rte_mempool *op_mpool = ts_params->op_mpool;
+ struct crypto_testsuite_ecdh_params input_params;
+ struct rte_cryptodev_asym_capability_idx idx;
+ uint8_t dev_id = ts_params->valid_devs[0];
+ struct rte_crypto_asym_xform xform = {0};
+ struct rte_crypto_op *result_op = NULL;
+ uint8_t output_buf_x[TEST_DATA_SIZE];
+ uint8_t output_buf_y[TEST_DATA_SIZE];
+ struct rte_crypto_asym_op *asym_op;
+ struct rte_crypto_op *op = NULL;
+ int ret, status = TEST_SUCCESS;
+ void *sess = NULL;
+
+ /* Check ECDH capability */
+ idx.type = RTE_CRYPTO_ASYM_XFORM_ECDH;
+ capa = rte_cryptodev_asym_capability_get(dev_id, &idx);
+ if (capa == NULL)
+ return -ENOTSUP;
+
+ if (!(capa->op_types & (1 << RTE_CRYPTO_ASYM_KE_PUB_KEY_GENERATE)))
+ return -ENOTSUP;
+
+ switch (curve_id) {
+ case SECP192R1:
+ input_params = ecdh_param_secp192r1;
+ break;
+ case SECP224R1:
+ input_params = ecdh_param_secp224r1;
+ break;
+ case SECP256R1:
+ input_params = ecdh_param_secp256r1;
+ break;
+ case SECP384R1:
+ input_params = ecdh_param_secp384r1;
+ break;
+ case SECP521R1:
+ input_params = ecdh_param_secp521r1;
+ break;
+ default:
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Unsupported curve id\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+
+ debug_hexdump(stdout, "pkey:",
+ input_params.pkey_A.data, input_params.pkey_A.length);
+
+ /* Setup crypto op data structure */
+ op = rte_crypto_op_alloc(op_mpool, RTE_CRYPTO_OP_TYPE_ASYMMETRIC);
+ if (op == NULL) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Failed to allocate asymmetric crypto "
+ "operation struct\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+ asym_op = op->asym;
+
+ /* Setup asym xform */
+ xform.next = NULL;
+ xform.xform_type = RTE_CRYPTO_ASYM_XFORM_ECDH;
+ xform.ec.curve_id = input_params.curve;
+ xform.ec.pkey.data = input_params.pkey_A.data;
+ xform.ec.pkey.length = input_params.pkey_A.length;
+
+ ret = rte_cryptodev_asym_session_create(dev_id, &xform, sess_mpool, &sess);
+ if (ret < 0) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Session creation failed\n");
+ status = (ret == -ENOTSUP) ? TEST_SKIPPED : TEST_FAILED;
+ goto exit;
+ }
+
+ /* Attach asymmetric crypto session to crypto operations */
+ rte_crypto_op_attach_asym_session(op, sess);
+
+ /* Populate op with operational details */
+ asym_op->ecdh.ke_type = RTE_CRYPTO_ASYM_KE_PUB_KEY_GENERATE;
+
+ /* Init out buf */
+ asym_op->ecdh.pub_key.x.data = output_buf_x;
+ asym_op->ecdh.pub_key.y.data = output_buf_y;
+
+ RTE_LOG(DEBUG, USER1, "Process ASYM operation\n");
+
+ /* Process crypto operation */
+ if (rte_cryptodev_enqueue_burst(dev_id, 0, &op, 1) != 1) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Error sending packet for operation\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+
+ while (rte_cryptodev_dequeue_burst(dev_id, 0, &result_op, 1) == 0)
+ rte_pause();
+
+ if (result_op == NULL) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Failed to process asym crypto op\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+
+ if (result_op->status != RTE_CRYPTO_OP_STATUS_SUCCESS) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Failed to process asym crypto op\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+
+ asym_op = result_op->asym;
+
+ debug_hexdump(stdout, "qx:",
+ asym_op->ecdh.pub_key.x.data, asym_op->ecdh.pub_key.x.length);
+ debug_hexdump(stdout, "qy:",
+ asym_op->ecdh.pub_key.y.data, asym_op->ecdh.pub_key.y.length);
+
+ ret = verify_ecdh_secret(input_params.pubkey_qA_x.data,
+ input_params.pubkey_qA_y.data, result_op);
+ if (ret) {
+ status = TEST_FAILED;
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "ECDH public key generation failed.\n");
+ goto exit;
+ }
+
+exit:
+ if (sess != NULL)
+ rte_cryptodev_asym_session_free(dev_id, sess);
+ rte_crypto_op_free(op);
+ return status;
+}
+
+static int
+test_ecdh_pub_key_verify(enum curve curve_id)
+{
+ struct crypto_testsuite_params_asym *ts_params = &testsuite_params;
+ const struct rte_cryptodev_asymmetric_xform_capability *capa;
+ struct rte_mempool *sess_mpool = ts_params->session_mpool;
+ struct rte_mempool *op_mpool = ts_params->op_mpool;
+ struct crypto_testsuite_ecdh_params input_params;
+ struct rte_cryptodev_asym_capability_idx idx;
+ uint8_t dev_id = ts_params->valid_devs[0];
+ struct rte_crypto_asym_xform xform = {0};
+ struct rte_crypto_op *result_op = NULL;
+ struct rte_crypto_asym_op *asym_op;
+ struct rte_crypto_op *op = NULL;
+ int ret, status = TEST_SUCCESS;
+ void *sess = NULL;
+
+ /* Check ECDH capability */
+ idx.type = RTE_CRYPTO_ASYM_XFORM_ECDH;
+ capa = rte_cryptodev_asym_capability_get(dev_id, &idx);
+ if (capa == NULL)
+ return -ENOTSUP;
+
+ if (!(capa->op_types & (1 << RTE_CRYPTO_ASYM_KE_PUB_KEY_VERIFY)))
+ return -ENOTSUP;
+
+ switch (curve_id) {
+ case SECP192R1:
+ input_params = ecdh_param_secp192r1;
+ break;
+ case SECP224R1:
+ input_params = ecdh_param_secp224r1;
+ break;
+ case SECP256R1:
+ input_params = ecdh_param_secp256r1;
+ break;
+ case SECP384R1:
+ input_params = ecdh_param_secp384r1;
+ break;
+ case SECP521R1:
+ input_params = ecdh_param_secp521r1;
+ break;
+ default:
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Unsupported curve id\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+
+ debug_hexdump(stdout, "qx:",
+ input_params.pubkey_qA_x.data, input_params.pubkey_qA_x.length);
+ debug_hexdump(stdout, "qy:",
+ input_params.pubkey_qA_y.data, input_params.pubkey_qA_y.length);
+
+ /* Setup crypto op data structure */
+ op = rte_crypto_op_alloc(op_mpool, RTE_CRYPTO_OP_TYPE_ASYMMETRIC);
+ if (op == NULL) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Failed to allocate asymmetric crypto "
+ "operation struct\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+ asym_op = op->asym;
+
+ /* Setup asym xform */
+ xform.next = NULL;
+ xform.xform_type = RTE_CRYPTO_ASYM_XFORM_ECDH;
+ xform.ec.curve_id = input_params.curve;
+
+ ret = rte_cryptodev_asym_session_create(dev_id, &xform, sess_mpool, &sess);
+ if (ret < 0) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Session creation failed\n");
+ status = (ret == -ENOTSUP) ? TEST_SKIPPED : TEST_FAILED;
+ goto exit;
+ }
+
+ /* Attach asymmetric crypto session to crypto operations */
+ rte_crypto_op_attach_asym_session(op, sess);
+
+ /* Populate op with operational details */
+ asym_op->ecdh.ke_type = RTE_CRYPTO_ASYM_KE_PUB_KEY_VERIFY;
+ asym_op->ecdh.pub_key.x.data = input_params.pubkey_qA_x.data;
+ asym_op->ecdh.pub_key.x.length = input_params.pubkey_qA_x.length;
+ asym_op->ecdh.pub_key.y.data = input_params.pubkey_qA_y.data;
+ asym_op->ecdh.pub_key.y.length = input_params.pubkey_qA_y.length;
+
+ RTE_LOG(DEBUG, USER1, "Process ASYM operation\n");
+
+ /* Process crypto operation */
+ if (rte_cryptodev_enqueue_burst(dev_id, 0, &op, 1) != 1) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Error sending packet for operation\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+
+ while (rte_cryptodev_dequeue_burst(dev_id, 0, &result_op, 1) == 0)
+ rte_pause();
+
+ if (result_op == NULL) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Failed to process asym crypto op\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+
+ if (result_op->status != RTE_CRYPTO_OP_STATUS_SUCCESS) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Failed to process asym crypto op\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+
+exit:
+ if (sess != NULL)
+ rte_cryptodev_asym_session_free(dev_id, sess);
+ rte_crypto_op_free(op);
+ return status;
+}
+
+static int
+test_ecdh_shared_secret(enum curve curve_id)
+{
+ struct crypto_testsuite_params_asym *ts_params = &testsuite_params;
+ const struct rte_cryptodev_asymmetric_xform_capability *capa;
+ struct rte_mempool *sess_mpool = ts_params->session_mpool;
+ struct rte_mempool *op_mpool = ts_params->op_mpool;
+ struct crypto_testsuite_ecdh_params input_params;
+ struct rte_cryptodev_asym_capability_idx idx;
+ uint8_t dev_id = ts_params->valid_devs[0];
+ struct rte_crypto_asym_xform xform = {0};
+ struct rte_crypto_op *result_op = NULL;
+ uint8_t output_buf_x[TEST_DATA_SIZE];
+ uint8_t output_buf_y[TEST_DATA_SIZE];
+ struct rte_crypto_asym_op *asym_op;
+ struct rte_crypto_op *op = NULL;
+ int ret, status = TEST_SUCCESS;
+ void *sess = NULL;
+
+ /* Check ECDH capability */
+ idx.type = RTE_CRYPTO_ASYM_XFORM_ECDH;
+ capa = rte_cryptodev_asym_capability_get(dev_id, &idx);
+ if (capa == NULL)
+ return -ENOTSUP;
+
+ if (!(capa->op_types & (1 << RTE_CRYPTO_ASYM_KE_SHARED_SECRET_COMPUTE)))
+ return -ENOTSUP;
+
+ switch (curve_id) {
+ case SECP192R1:
+ input_params = ecdh_param_secp192r1;
+ break;
+ case SECP224R1:
+ input_params = ecdh_param_secp224r1;
+ break;
+ case SECP256R1:
+ input_params = ecdh_param_secp256r1;
+ break;
+ case SECP384R1:
+ input_params = ecdh_param_secp384r1;
+ break;
+ case SECP521R1:
+ input_params = ecdh_param_secp521r1;
+ break;
+ default:
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Unsupported curve id\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+
+ /* zA = dA.QB */
+ debug_hexdump(stdout, "pkey:",
+ input_params.pkey_A.data, input_params.pkey_A.length);
+ debug_hexdump(stdout, "qx:",
+ input_params.pubkey_qB_x.data, input_params.pubkey_qB_x.length);
+ debug_hexdump(stdout, "qy:",
+ input_params.pubkey_qB_y.data, input_params.pubkey_qB_y.length);
+
+ /* Setup crypto op data structure */
+ op = rte_crypto_op_alloc(op_mpool, RTE_CRYPTO_OP_TYPE_ASYMMETRIC);
+ if (op == NULL) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Failed to allocate asymmetric crypto "
+ "operation struct\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+ asym_op = op->asym;
+
+ /* Setup asym xform */
+ xform.next = NULL;
+ xform.xform_type = RTE_CRYPTO_ASYM_XFORM_ECDH;
+ xform.ec.curve_id = input_params.curve;
+ xform.ec.pkey.data = input_params.pkey_A.data;
+ xform.ec.pkey.length = input_params.pkey_A.length;
+ xform.ec.q.x.data = input_params.pubkey_qB_x.data;
+ xform.ec.q.x.length = input_params.pubkey_qB_x.length;
+ xform.ec.q.y.data = input_params.pubkey_qB_y.data;
+ xform.ec.q.y.length = input_params.pubkey_qB_y.length;
+
+ ret = rte_cryptodev_asym_session_create(dev_id, &xform, sess_mpool, &sess);
+ if (ret < 0) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Session creation failed\n");
+ status = (ret == -ENOTSUP) ? TEST_SKIPPED : TEST_FAILED;
+ goto exit;
+ }
+
+ /* Attach asymmetric crypto session to crypto operations */
+ rte_crypto_op_attach_asym_session(op, sess);
+
+ /* Populate op with operational details */
+ asym_op->ecdh.ke_type = RTE_CRYPTO_ASYM_KE_SHARED_SECRET_COMPUTE;
+
+ /* Init out buf */
+ asym_op->ecdh.shared_secret.x.data = output_buf_x;
+ asym_op->ecdh.shared_secret.y.data = output_buf_y;
+
+ RTE_LOG(DEBUG, USER1, "Process ASYM operation\n");
+
+ /* Process crypto operation */
+ if (rte_cryptodev_enqueue_burst(dev_id, 0, &op, 1) != 1) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Error sending packet for operation\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+
+ while (rte_cryptodev_dequeue_burst(dev_id, 0, &result_op, 1) == 0)
+ rte_pause();
+
+ if (result_op == NULL) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Failed to process asym crypto op\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+
+ if (result_op->status != RTE_CRYPTO_OP_STATUS_SUCCESS) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Failed to process asym crypto op\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+
+ asym_op = result_op->asym;
+
+ debug_hexdump(stdout, "secret_x:",
+ asym_op->ecdh.shared_secret.x.data, asym_op->ecdh.shared_secret.x.length);
+ debug_hexdump(stdout, "secret_y:",
+ asym_op->ecdh.shared_secret.y.data, asym_op->ecdh.shared_secret.y.length);
+
+ ret = verify_ecdh_secret(input_params.secret_x.data,
+ input_params.secret_y.data, result_op);
+ if (ret) {
+ status = TEST_FAILED;
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "ECDH shared secret compute failed.\n");
+ goto exit;
+ }
+
+ if (sess != NULL)
+ rte_cryptodev_asym_session_free(dev_id, sess);
+ rte_crypto_op_free(op);
+
+ /* zB = dB.QA */
+ debug_hexdump(stdout, "pkey:",
+ input_params.pkey_B.data, input_params.pkey_B.length);
+ debug_hexdump(stdout, "qx:",
+ input_params.pubkey_qA_x.data, input_params.pubkey_qA_x.length);
+ debug_hexdump(stdout, "qy:",
+ input_params.pubkey_qA_y.data, input_params.pubkey_qA_y.length);
+
+ /* Setup crypto op data structure */
+ op = rte_crypto_op_alloc(op_mpool, RTE_CRYPTO_OP_TYPE_ASYMMETRIC);
+ if (op == NULL) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Failed to allocate asymmetric crypto "
+ "operation struct\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+ asym_op = op->asym;
+
+ /* Setup asym xform */
+ xform.next = NULL;
+ xform.xform_type = RTE_CRYPTO_ASYM_XFORM_ECDH;
+ xform.ec.curve_id = input_params.curve;
+ xform.ec.pkey.data = input_params.pkey_B.data;
+ xform.ec.pkey.length = input_params.pkey_B.length;
+ xform.ec.q.x.data = input_params.pubkey_qA_x.data;
+ xform.ec.q.x.length = input_params.pubkey_qA_x.length;
+ xform.ec.q.y.data = input_params.pubkey_qA_y.data;
+ xform.ec.q.y.length = input_params.pubkey_qA_y.length;
+
+ ret = rte_cryptodev_asym_session_create(dev_id, &xform, sess_mpool, &sess);
+ if (ret < 0) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Session creation failed\n");
+ status = (ret == -ENOTSUP) ? TEST_SKIPPED : TEST_FAILED;
+ goto exit;
+ }
+
+ /* Attach asymmetric crypto session to crypto operations */
+ rte_crypto_op_attach_asym_session(op, sess);
+
+ /* Populate op with operational details */
+ asym_op->ecdh.ke_type = RTE_CRYPTO_ASYM_KE_SHARED_SECRET_COMPUTE;
+
+ /* Init out buf */
+ asym_op->ecdh.shared_secret.x.data = output_buf_x;
+ asym_op->ecdh.shared_secret.y.data = output_buf_y;
+
+ RTE_LOG(DEBUG, USER1, "Process ASYM operation\n");
+
+ /* Process crypto operation */
+ if (rte_cryptodev_enqueue_burst(dev_id, 0, &op, 1) != 1) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Error sending packet for operation\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+
+ while (rte_cryptodev_dequeue_burst(dev_id, 0, &result_op, 1) == 0)
+ rte_pause();
+
+ if (result_op == NULL) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Failed to process asym crypto op\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+
+ if (result_op->status != RTE_CRYPTO_OP_STATUS_SUCCESS) {
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "Failed to process asym crypto op\n");
+ status = TEST_FAILED;
+ goto exit;
+ }
+
+ asym_op = result_op->asym;
+
+ debug_hexdump(stdout, "secret_x:",
+ asym_op->ecdh.shared_secret.x.data, asym_op->ecdh.shared_secret.x.length);
+ debug_hexdump(stdout, "secret_y:",
+ asym_op->ecdh.shared_secret.y.data, asym_op->ecdh.shared_secret.y.length);
+
+ ret = verify_ecdh_secret(input_params.secret_x.data,
+ input_params.secret_y.data, result_op);
+ if (ret) {
+ status = TEST_FAILED;
+ RTE_LOG(ERR, USER1,
+ "line %u FAILED: %s", __LINE__,
+ "ECDH shared secret compute failed.\n");
+ goto exit;
+ }
+
+exit:
+ if (sess != NULL)
+ rte_cryptodev_asym_session_free(dev_id, sess);
+ rte_crypto_op_free(op);
+ return status;
+}
+
+static int
+test_ecdh_all_curve(void)
+{
+ int status, overall_status = TEST_SUCCESS;
+ enum curve curve_id;
+ int test_index = 0;
+ const char *msg;
+
+ for (curve_id = SECP192R1; curve_id < END_OF_CURVE_LIST; curve_id++) {
+ if (curve_id == SECP521R1_UA)
+ continue;
+
+ status = test_ecdh_priv_key_generate(curve_id);
+ if (status == TEST_SUCCESS) {
+ msg = "succeeded";
+ } else {
+ msg = "failed";
+ overall_status = status;
+ }
+ printf(" %u) TestCase ECDH private key generation for Curve %s %s\n",
+ test_index ++, curve[curve_id], msg);
+ }
+
+ for (curve_id = SECP192R1; curve_id < END_OF_CURVE_LIST; curve_id++) {
+ if (curve_id == SECP521R1_UA)
+ continue;
+
+ status = test_ecdh_pub_key_generate(curve_id);
+ if (status == TEST_SUCCESS) {
+ msg = "succeeded";
+ } else {
+ msg = "failed";
+ overall_status = status;
+ }
+ printf(" %u) TestCase ECDH public key generation for Curve %s %s\n",
+ test_index ++, curve[curve_id], msg);
+ }
+
+ for (curve_id = SECP192R1; curve_id < END_OF_CURVE_LIST; curve_id++) {
+ if (curve_id == SECP521R1_UA)
+ continue;
+
+ status = test_ecdh_pub_key_verify(curve_id);
+ if (status == TEST_SUCCESS) {
+ msg = "succeeded";
+ } else {
+ msg = "failed";
+ overall_status = status;
+ }
+ printf(" %u) TestCase ECDH public key verification for Curve %s %s\n",
+ test_index ++, curve[curve_id], msg);
+ }
+
+ for (curve_id = SECP192R1; curve_id < END_OF_CURVE_LIST; curve_id++) {
+ if (curve_id == SECP521R1_UA)
+ continue;
+
+ status = test_ecdh_shared_secret(curve_id);
+ if (status == TEST_SUCCESS) {
+ msg = "succeeded";
+ } else {
+ msg = "failed";
+ overall_status = status;
+ }
+ printf(" %u) TestCase ECDH shared secret compute for Curve %s %s\n",
+ test_index ++, curve[curve_id], msg);
+ }
+
+ return overall_status;
+}
+
static int
test_sm2_sign(void)
{
@@ -2853,6 +3592,8 @@ static struct unit_test_suite cryptodev_octeontx_asym_testsuite = {
test_ecdsa_sign_verify_all_curve),
TEST_CASE_ST(ut_setup_asym, ut_teardown_asym, test_sm2_sign),
TEST_CASE_ST(ut_setup_asym, ut_teardown_asym, test_sm2_verify),
+ TEST_CASE_ST(ut_setup_asym, ut_teardown_asym,
+ test_ecdh_all_curve),
TEST_CASE_ST(ut_setup_asym, ut_teardown_asym,
test_ecpm_all_curve),
TEST_CASES_END() /**< NULL terminate unit test array */
diff --git a/app/test/test_cryptodev_asym_util.h b/app/test/test_cryptodev_asym_util.h
index 83dc265dd7..07e6e831e8 100644
--- a/app/test/test_cryptodev_asym_util.h
+++ b/app/test/test_cryptodev_asym_util.h
@@ -57,4 +57,16 @@ static inline int verify_ecpm(uint8_t *result_x, uint8_t *result_y,
return 0;
}
+
+static inline int verify_ecdh_secret(uint8_t *result_x, uint8_t *result_y,
+ struct rte_crypto_op *result_op)
+{
+ if (memcmp(result_x, result_op->asym->ecdh.shared_secret.x.data,
+ result_op->asym->ecdh.shared_secret.x.length) ||
+ memcmp(result_y, result_op->asym->ecdh.shared_secret.y.data,
+ result_op->asym->ecdh.shared_secret.y.length))
+ return -1;
+
+ return 0;
+}
#endif /* TEST_CRYPTODEV_ASYM_TEST_UTIL_H__ */
diff --git a/app/test/test_cryptodev_ecdh_test_vectors.h b/app/test/test_cryptodev_ecdh_test_vectors.h
new file mode 100644
index 0000000000..b577c179c8
--- /dev/null
+++ b/app/test/test_cryptodev_ecdh_test_vectors.h
@@ -0,0 +1,556 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C) 2023 Marvell International Ltd.
+ */
+
+#ifndef __TEST_CRYPTODEV_ECDH_TEST_VECTORS_H__
+#define __TEST_CRYPTODEV_ECDH_TEST_VECTORS_H__
+
+#include "rte_crypto_asym.h"
+
+struct crypto_testsuite_ecdh_params {
+ rte_crypto_param pubkey_qA_x;
+ rte_crypto_param pubkey_qA_y;
+ rte_crypto_param pkey_A;
+ rte_crypto_param pubkey_qB_x;
+ rte_crypto_param pubkey_qB_y;
+ rte_crypto_param pkey_B;
+ rte_crypto_param secret_x;
+ rte_crypto_param secret_y;
+ int curve;
+};
+
+/*
+ * Test vector reference:
+ * https://datatracker.ietf.org/doc/html/rfc5114.html
+ * Appendix A.
+ */
+
+/** SECP192R1 (P-192 NIST) test vector */
+
+static uint8_t dA_secp192r1[] = {
+ 0x32, 0x3F, 0xA3, 0x16, 0x9D, 0x8E, 0x9C, 0x65,
+ 0x93, 0xF5, 0x94, 0x76, 0xBC, 0x14, 0x20, 0x00,
+ 0xAB, 0x5B, 0xE0, 0xE2, 0x49, 0xC4, 0x34, 0x26
+};
+
+static uint8_t x_qA_secp192r1[] = {
+ 0xCD, 0x46, 0x48, 0x9E, 0xCF, 0xD6, 0xC1, 0x05,
+ 0xE7, 0xB3, 0xD3, 0x25, 0x66, 0xE2, 0xB1, 0x22,
+ 0xE2, 0x49, 0xAB, 0xAA, 0xDD, 0x87, 0x06, 0x12
+};
+
+static uint8_t y_qA_secp192r1[] = {
+ 0x68, 0x88, 0x7B, 0x48, 0x77, 0xDF, 0x51, 0xDD,
+ 0x4D, 0xC3, 0xD6, 0xFD, 0x11, 0xF0, 0xA2, 0x6F,
+ 0x8F, 0xD3, 0x84, 0x43, 0x17, 0x91, 0x6E, 0x9A
+};
+
+static uint8_t dB_secp192r1[] = {
+ 0x63, 0x1F, 0x95, 0xBB, 0x4A, 0x67, 0x63, 0x2C,
+ 0x9C, 0x47, 0x6E, 0xEE, 0x9A, 0xB6, 0x95, 0xAB,
+ 0x24, 0x0A, 0x04, 0x99, 0x30, 0x7F, 0xCF, 0x62
+};
+
+static uint8_t x_qB_secp192r1[] = {
+ 0x51, 0x9A, 0x12, 0x16, 0x80, 0xE0, 0x04, 0x54,
+ 0x66, 0xBA, 0x21, 0xDF, 0x2E, 0xEE, 0x47, 0xF5,
+ 0x97, 0x3B, 0x50, 0x05, 0x77, 0xEF, 0x13, 0xD5
+};
+
+static uint8_t y_qB_secp192r1[] = {
+ 0xFF, 0x61, 0x3A, 0xB4, 0xD6, 0x4C, 0xEE, 0x3A,
+ 0x20, 0x87, 0x5B, 0xDB, 0x10, 0xF9, 0x53, 0xF6,
+ 0xB3, 0x0C, 0xA0, 0x72, 0xC6, 0x0A, 0xA5, 0x7F
+};
+
+static uint8_t x_Z_secp192r1[] = {
+ 0xAD, 0x42, 0x01, 0x82, 0x63, 0x3F, 0x85, 0x26,
+ 0xBF, 0xE9, 0x54, 0xAC, 0xDA, 0x37, 0x6F, 0x05,
+ 0xE5, 0xFF, 0x4F, 0x83, 0x7F, 0x54, 0xFE, 0xBE
+};
+
+static uint8_t y_Z_secp192r1[] = {
+ 0x43, 0x71, 0x54, 0x5E, 0xD7, 0x72, 0xA5, 0x97,
+ 0x41, 0xD0, 0xED, 0xA3, 0x2C, 0x67, 0x11, 0x12,
+ 0xB7, 0xFD, 0xDD, 0x51, 0x46, 0x1F, 0xCF, 0x32
+};
+
+/** ECDH SECP192R1 elliptic curve param */
+
+struct crypto_testsuite_ecdh_params ecdh_param_secp192r1 = {
+ .pubkey_qA_x = {
+ .data = x_qA_secp192r1,
+ .length = sizeof(x_qA_secp192r1),
+ },
+ .pubkey_qA_y = {
+ .data = y_qA_secp192r1,
+ .length = sizeof(y_qA_secp192r1),
+ },
+ .pubkey_qB_x = {
+ .data = x_qB_secp192r1,
+ .length = sizeof(x_qB_secp192r1),
+ },
+ .pubkey_qB_y = {
+ .data = y_qB_secp192r1,
+ .length = sizeof(y_qB_secp192r1),
+ },
+ .pkey_A = {
+ .data = dA_secp192r1,
+ .length = sizeof(dA_secp192r1),
+ },
+ .pkey_B = {
+ .data = dB_secp192r1,
+ .length = sizeof(dB_secp192r1),
+ },
+ .secret_x = {
+ .data = x_Z_secp192r1,
+ .length = sizeof(x_Z_secp192r1),
+ },
+ .secret_y = {
+ .data = y_Z_secp192r1,
+ .length = sizeof(y_Z_secp192r1),
+ },
+ .curve = RTE_CRYPTO_EC_GROUP_SECP192R1
+};
+
+/** SECP224R1 (P-224 NIST) test vector */
+
+static uint8_t dA_secp224r1[] = {
+ 0xB5, 0x58, 0xEB, 0x6C, 0x28, 0x8D, 0xA7, 0x07,
+ 0xBB, 0xB4, 0xF8, 0xFB, 0xAE, 0x2A, 0xB9, 0xE9,
+ 0xCB, 0x62, 0xE3, 0xBC, 0x5C, 0x75, 0x73, 0xE2,
+ 0x2E, 0x26, 0xD3, 0x7F
+};
+
+static uint8_t x_qA_secp224r1[] = {
+ 0x49, 0xDF, 0xEF, 0x30, 0x9F, 0x81, 0x48, 0x8C,
+ 0x30, 0x4C, 0xFF, 0x5A, 0xB3, 0xEE, 0x5A, 0x21,
+ 0x54, 0x36, 0x7D, 0xC7, 0x83, 0x31, 0x50, 0xE0,
+ 0xA5, 0x1F, 0x3E, 0xEB
+};
+
+static uint8_t y_qA_secp224r1[] = {
+ 0x4F, 0x2B, 0x5E, 0xE4, 0x57, 0x62, 0xC4, 0xF6,
+ 0x54, 0xC1, 0xA0, 0xC6, 0x7F, 0x54, 0xCF, 0x88,
+ 0xB0, 0x16, 0xB5, 0x1B, 0xCE, 0x3D, 0x7C, 0x22,
+ 0x8D, 0x57, 0xAD, 0xB4,
+};
+
+static uint8_t dB_secp224r1[] = {
+ 0xAC, 0x3B, 0x1A, 0xDD, 0x3D, 0x97, 0x70, 0xE6,
+ 0xF6, 0xA7, 0x08, 0xEE, 0x9F, 0x3B, 0x8E, 0x0A,
+ 0xB3, 0xB4, 0x80, 0xE9, 0xF2, 0x7F, 0x85, 0xC8,
+ 0x8B, 0x5E, 0x6D, 0x18,
+};
+
+static uint8_t x_qB_secp224r1[] = {
+ 0x6B, 0x3A, 0xC9, 0x6A, 0x8D, 0x0C, 0xDE, 0x6A,
+ 0x55, 0x99, 0xBE, 0x80, 0x32, 0xED, 0xF1, 0x0C,
+ 0x16, 0x2D, 0x0A, 0x8A, 0xD2, 0x19, 0x50, 0x6D,
+ 0xCD, 0x42, 0xA2, 0x07,
+};
+
+static uint8_t y_qB_secp224r1[] = {
+ 0xD4, 0x91, 0xBE, 0x99, 0xC2, 0x13, 0xA7, 0xD1,
+ 0xCA, 0x37, 0x06, 0xDE, 0xBF, 0xE3, 0x05, 0xF3,
+ 0x61, 0xAF, 0xCB, 0xB3, 0x3E, 0x26, 0x09, 0xC8,
+ 0xB1, 0x61, 0x8A, 0xD5
+};
+
+static uint8_t x_Z_secp224r1[] = {
+ 0x52, 0x27, 0x2F, 0x50, 0xF4, 0x6F, 0x4E, 0xDC,
+ 0x91, 0x51, 0x56, 0x90, 0x92, 0xF4, 0x6D, 0xF2,
+ 0xD9, 0x6E, 0xCC, 0x3B, 0x6D, 0xC1, 0x71, 0x4A,
+ 0x4E, 0xA9, 0x49, 0xFA
+};
+
+static uint8_t y_Z_secp224r1[] = {
+ 0x5F, 0x30, 0xC6, 0xAA, 0x36, 0xDD, 0xC4, 0x03,
+ 0xC0, 0xAC, 0xB7, 0x12, 0xBB, 0x88, 0xF1, 0x76,
+ 0x3C, 0x30, 0x46, 0xF6, 0xD9, 0x19, 0xBD, 0x9C,
+ 0x52, 0x43, 0x22, 0xBF
+};
+
+/** ECDH SECP224R1 elliptic curve param */
+
+struct crypto_testsuite_ecdh_params ecdh_param_secp224r1 = {
+ .pubkey_qA_x = {
+ .data = x_qA_secp224r1,
+ .length = sizeof(x_qA_secp224r1),
+ },
+ .pubkey_qA_y = {
+ .data = y_qA_secp224r1,
+ .length = sizeof(y_qA_secp224r1),
+ },
+ .pubkey_qB_x = {
+ .data = x_qB_secp224r1,
+ .length = sizeof(x_qB_secp224r1),
+ },
+ .pubkey_qB_y = {
+ .data = y_qB_secp224r1,
+ .length = sizeof(y_qB_secp224r1),
+ },
+ .pkey_A = {
+ .data = dA_secp224r1,
+ .length = sizeof(dA_secp224r1),
+ },
+ .pkey_B = {
+ .data = dB_secp224r1,
+ .length = sizeof(dB_secp224r1),
+ },
+ .secret_x = {
+ .data = x_Z_secp224r1,
+ .length = sizeof(x_Z_secp224r1),
+ },
+ .secret_y = {
+ .data = y_Z_secp224r1,
+ .length = sizeof(y_Z_secp224r1),
+ },
+ .curve = RTE_CRYPTO_EC_GROUP_SECP224R1
+};
+
+/** SECP256R1 (P-256 NIST) test vector */
+
+static uint8_t dA_secp256r1[] = {
+ 0x81, 0x42, 0x64, 0x14, 0x5F, 0x2F, 0x56, 0xF2,
+ 0xE9, 0x6A, 0x8E, 0x33, 0x7A, 0x12, 0x84, 0x99,
+ 0x3F, 0xAF, 0x43, 0x2A, 0x5A, 0xBC, 0xE5, 0x9E,
+ 0x86, 0x7B, 0x72, 0x91, 0xD5, 0x07, 0xA3, 0xAF
+};
+
+static uint8_t x_qA_secp256r1[] = {
+ 0x2A, 0xF5, 0x02, 0xF3, 0xBE, 0x89, 0x52, 0xF2,
+ 0xC9, 0xB5, 0xA8, 0xD4, 0x16, 0x0D, 0x09, 0xE9,
+ 0x71, 0x65, 0xBE, 0x50, 0xBC, 0x42, 0xAE, 0x4A,
+ 0x5E, 0x8D, 0x3B, 0x4B, 0xA8, 0x3A, 0xEB, 0x15
+};
+
+static uint8_t y_qA_secp256r1[] = {
+ 0xEB, 0x0F, 0xAF, 0x4C, 0xA9, 0x86, 0xC4, 0xD3,
+ 0x86, 0x81, 0xA0, 0xF9, 0x87, 0x2D, 0x79, 0xD5,
+ 0x67, 0x95, 0xBD, 0x4B, 0xFF, 0x6E, 0x6D, 0xE3,
+ 0xC0, 0xF5, 0x01, 0x5E, 0xCE, 0x5E, 0xFD, 0x85
+};
+
+static uint8_t dB_secp256r1[] = {
+ 0x2C, 0xE1, 0x78, 0x8E, 0xC1, 0x97, 0xE0, 0x96,
+ 0xDB, 0x95, 0xA2, 0x00, 0xCC, 0x0A, 0xB2, 0x6A,
+ 0x19, 0xCE, 0x6B, 0xCC, 0xAD, 0x56, 0x2B, 0x8E,
+ 0xEE, 0x1B, 0x59, 0x37, 0x61, 0xCF, 0x7F, 0x41
+};
+
+static uint8_t x_qB_secp256r1[] = {
+ 0xB1, 0x20, 0xDE, 0x4A, 0xA3, 0x64, 0x92, 0x79,
+ 0x53, 0x46, 0xE8, 0xDE, 0x6C, 0x2C, 0x86, 0x46,
+ 0xAE, 0x06, 0xAA, 0xEA, 0x27, 0x9F, 0xA7, 0x75,
+ 0xB3, 0xAB, 0x07, 0x15, 0xF6, 0xCE, 0x51, 0xB0
+};
+
+static uint8_t y_qB_secp256r1[] = {
+ 0x9F, 0x1B, 0x7E, 0xEC, 0xE2, 0x0D, 0x7B, 0x5E,
+ 0xD8, 0xEC, 0x68, 0x5F, 0xA3, 0xF0, 0x71, 0xD8,
+ 0x37, 0x27, 0x02, 0x70, 0x92, 0xA8, 0x41, 0x13,
+ 0x85, 0xC3, 0x4D, 0xDE, 0x57, 0x08, 0xB2, 0xB6
+};
+
+static uint8_t x_Z_secp256r1[] = {
+ 0xDD, 0x0F, 0x53, 0x96, 0x21, 0x9D, 0x1E, 0xA3,
+ 0x93, 0x31, 0x04, 0x12, 0xD1, 0x9A, 0x08, 0xF1,
+ 0xF5, 0x81, 0x1E, 0x9D, 0xC8, 0xEC, 0x8E, 0xEA,
+ 0x7F, 0x80, 0xD2, 0x1C, 0x82, 0x0C, 0x27, 0x88
+};
+
+static uint8_t y_Z_secp256r1[] = {
+ 0x03, 0x57, 0xDC, 0xCD, 0x4C, 0x80, 0x4D, 0x0D,
+ 0x8D, 0x33, 0xAA, 0x42, 0xB8, 0x48, 0x83, 0x4A,
+ 0xA5, 0x60, 0x5F, 0x9A, 0xB0, 0xD3, 0x72, 0x39,
+ 0xA1, 0x15, 0xBB, 0xB6, 0x47, 0x93, 0x6F, 0x50
+};
+
+/** ECDH SECP256R1 elliptic curve param */
+
+struct crypto_testsuite_ecdh_params ecdh_param_secp256r1 = {
+ .pubkey_qA_x = {
+ .data = x_qA_secp256r1,
+ .length = sizeof(x_qA_secp256r1),
+ },
+ .pubkey_qA_y = {
+ .data = y_qA_secp256r1,
+ .length = sizeof(y_qA_secp256r1),
+ },
+ .pubkey_qB_x = {
+ .data = x_qB_secp256r1,
+ .length = sizeof(x_qB_secp256r1),
+ },
+ .pubkey_qB_y = {
+ .data = y_qB_secp256r1,
+ .length = sizeof(y_qB_secp256r1),
+ },
+ .pkey_A = {
+ .data = dA_secp256r1,
+ .length = sizeof(dA_secp256r1),
+ },
+ .pkey_B = {
+ .data = dB_secp256r1,
+ .length = sizeof(dB_secp256r1),
+ },
+ .secret_x = {
+ .data = x_Z_secp256r1,
+ .length = sizeof(x_Z_secp256r1),
+ },
+ .secret_y = {
+ .data = y_Z_secp256r1,
+ .length = sizeof(y_Z_secp256r1),
+ },
+ .curve = RTE_CRYPTO_EC_GROUP_SECP256R1
+};
+
+/** SECP384R1 (P-384 NIST) test vector */
+
+static uint8_t dA_secp384r1[] = {
+ 0xD2, 0x73, 0x35, 0xEA, 0x71, 0x66, 0x4A, 0xF2,
+ 0x44, 0xDD, 0x14, 0xE9, 0xFD, 0x12, 0x60, 0x71,
+ 0x5D, 0xFD, 0x8A, 0x79, 0x65, 0x57, 0x1C, 0x48,
+ 0xD7, 0x09, 0xEE, 0x7A, 0x79, 0x62, 0xA1, 0x56,
+ 0xD7, 0x06, 0xA9, 0x0C, 0xBC, 0xB5, 0xDF, 0x29,
+ 0x86, 0xF0, 0x5F, 0xEA, 0xDB, 0x93, 0x76, 0xF1
+};
+
+static uint8_t x_qA_secp384r1[] = {
+ 0x79, 0x31, 0x48, 0xF1, 0x78, 0x76, 0x34, 0xD5,
+ 0xDA, 0x4C, 0x6D, 0x90, 0x74, 0x41, 0x7D, 0x05,
+ 0xE0, 0x57, 0xAB, 0x62, 0xF8, 0x20, 0x54, 0xD1,
+ 0x0E, 0xE6, 0xB0, 0x40, 0x3D, 0x62, 0x79, 0x54,
+ 0x7E, 0x6A, 0x8E, 0xA9, 0xD1, 0xFD, 0x77, 0x42,
+ 0x7D, 0x01, 0x6F, 0xE2, 0x7A, 0x8B, 0x8C, 0x66
+};
+
+static uint8_t y_qA_secp384r1[] = {
+ 0xC6, 0xC4, 0x12, 0x94, 0x33, 0x1D, 0x23, 0xE6,
+ 0xF4, 0x80, 0xF4, 0xFB, 0x4C, 0xD4, 0x05, 0x04,
+ 0xC9, 0x47, 0x39, 0x2E, 0x94, 0xF4, 0xC3, 0xF0,
+ 0x6B, 0x8F, 0x39, 0x8B, 0xB2, 0x9E, 0x42, 0x36,
+ 0x8F, 0x7A, 0x68, 0x59, 0x23, 0xDE, 0x3B, 0x67,
+ 0xBA, 0xCE, 0xD2, 0x14, 0xA1, 0xA1, 0xD1, 0x28
+};
+
+static uint8_t dB_secp384r1[] = {
+ 0x52, 0xD1, 0x79, 0x1F, 0xDB, 0x4B, 0x70, 0xF8,
+ 0x9C, 0x0F, 0x00, 0xD4, 0x56, 0xC2, 0xF7, 0x02,
+ 0x3B, 0x61, 0x25, 0x26, 0x2C, 0x36, 0xA7, 0xDF,
+ 0x1F, 0x80, 0x23, 0x11, 0x21, 0xCC, 0xE3, 0xD3,
+ 0x9B, 0xE5, 0x2E, 0x00, 0xC1, 0x94, 0xA4, 0x13,
+ 0x2C, 0x4A, 0x6C, 0x76, 0x8B, 0xCD, 0x94, 0xD2
+};
+
+static uint8_t x_qB_secp384r1[] = {
+ 0x5C, 0xD4, 0x2A, 0xB9, 0xC4, 0x1B, 0x53, 0x47,
+ 0xF7, 0x4B, 0x8D, 0x4E, 0xFB, 0x70, 0x8B, 0x3D,
+ 0x5B, 0x36, 0xDB, 0x65, 0x91, 0x53, 0x59, 0xB4,
+ 0x4A, 0xBC, 0x17, 0x64, 0x7B, 0x6B, 0x99, 0x99,
+ 0x78, 0x9D, 0x72, 0xA8, 0x48, 0x65, 0xAE, 0x2F,
+ 0x22, 0x3F, 0x12, 0xB5, 0xA1, 0xAB, 0xC1, 0x20
+};
+
+static uint8_t y_qB_secp384r1[] = {
+ 0xE1, 0x71, 0x45, 0x8F, 0xEA, 0xA9, 0x39, 0xAA,
+ 0xA3, 0xA8, 0xBF, 0xAC, 0x46, 0xB4, 0x04, 0xBD,
+ 0x8F, 0x6D, 0x5B, 0x34, 0x8C, 0x0F, 0xA4, 0xD8,
+ 0x0C, 0xEC, 0xA1, 0x63, 0x56, 0xCA, 0x93, 0x32,
+ 0x40, 0xBD, 0xE8, 0x72, 0x34, 0x15, 0xA8, 0xEC,
+ 0xE0, 0x35, 0xB0, 0xED, 0xF3, 0x67, 0x55, 0xDE
+};
+
+static uint8_t x_Z_secp384r1[] = {
+ 0x5E, 0xA1, 0xFC, 0x4A, 0xF7, 0x25, 0x6D, 0x20,
+ 0x55, 0x98, 0x1B, 0x11, 0x05, 0x75, 0xE0, 0xA8,
+ 0xCA, 0xE5, 0x31, 0x60, 0x13, 0x7D, 0x90, 0x4C,
+ 0x59, 0xD9, 0x26, 0xEB, 0x1B, 0x84, 0x56, 0xE4,
+ 0x27, 0xAA, 0x8A, 0x45, 0x40, 0x88, 0x4C, 0x37,
+ 0xDE, 0x15, 0x9A, 0x58, 0x02, 0x8A, 0xBC, 0x0E
+};
+
+static uint8_t y_Z_secp384r1[] = {
+ 0x0C, 0xC5, 0x9E, 0x4B, 0x04, 0x64, 0x14, 0xA8,
+ 0x1C, 0x8A, 0x3B, 0xDF, 0xDC, 0xA9, 0x25, 0x26,
+ 0xC4, 0x87, 0x69, 0xDD, 0x8D, 0x31, 0x27, 0xCA,
+ 0xA9, 0x9B, 0x36, 0x32, 0xD1, 0x91, 0x39, 0x42,
+ 0xDE, 0x36, 0x2E, 0xAF, 0xAA, 0x96, 0x23, 0x79,
+ 0x37, 0x4D, 0x9F, 0x3F, 0x06, 0x68, 0x41, 0xCA
+};
+
+/** ECDH SECP384R1 elliptic curve param */
+
+struct crypto_testsuite_ecdh_params ecdh_param_secp384r1 = {
+ .pubkey_qA_x = {
+ .data = x_qA_secp384r1,
+ .length = sizeof(x_qA_secp384r1),
+ },
+ .pubkey_qA_y = {
+ .data = y_qA_secp384r1,
+ .length = sizeof(y_qA_secp384r1),
+ },
+ .pubkey_qB_x = {
+ .data = x_qB_secp384r1,
+ .length = sizeof(x_qB_secp384r1),
+ },
+ .pubkey_qB_y = {
+ .data = y_qB_secp384r1,
+ .length = sizeof(y_qB_secp384r1),
+ },
+ .pkey_A = {
+ .data = dA_secp384r1,
+ .length = sizeof(dA_secp384r1),
+ },
+ .pkey_B = {
+ .data = dB_secp384r1,
+ .length = sizeof(dB_secp384r1),
+ },
+ .secret_x = {
+ .data = x_Z_secp384r1,
+ .length = sizeof(x_Z_secp384r1),
+ },
+ .secret_y = {
+ .data = y_Z_secp384r1,
+ .length = sizeof(y_Z_secp384r1),
+ },
+ .curve = RTE_CRYPTO_EC_GROUP_SECP384R1
+};
+
+/** SECP521R1 (P-521 NIST) test vector */
+
+static uint8_t dA_secp521r1[] = {
+ 0x01, 0x13, 0xF8, 0x2D, 0xA8, 0x25, 0x73, 0x5E,
+ 0x3D, 0x97, 0x27, 0x66, 0x83, 0xB2, 0xB7, 0x42,
+ 0x77, 0xBA, 0xD2, 0x73, 0x35, 0xEA, 0x71, 0x66,
+ 0x4A, 0xF2, 0x43, 0x0C, 0xC4, 0xF3, 0x34, 0x59,
+ 0xB9, 0x66, 0x9E, 0xE7, 0x8B, 0x3F, 0xFB, 0x9B,
+ 0x86, 0x83, 0x01, 0x5D, 0x34, 0x4D, 0xCB, 0xFE,
+ 0xF6, 0xFB, 0x9A, 0xF4, 0xC6, 0xC4, 0x70, 0xBE,
+ 0x25, 0x45, 0x16, 0xCD, 0x3C, 0x1A, 0x1F, 0xB4,
+ 0x73, 0x62
+};
+
+static uint8_t x_qA_secp521r1[] = {
+ 0x01, 0xEB, 0xB3, 0x4D, 0xD7, 0x57, 0x21, 0xAB,
+ 0xF8, 0xAD, 0xC9, 0xDB, 0xED, 0x17, 0x88, 0x9C,
+ 0xBB, 0x97, 0x65, 0xD9, 0x0A, 0x7C, 0x60, 0xF2,
+ 0xCE, 0xF0, 0x07, 0xBB, 0x0F, 0x2B, 0x26, 0xE1,
+ 0x48, 0x81, 0xFD, 0x44, 0x42, 0xE6, 0x89, 0xD6,
+ 0x1C, 0xB2, 0xDD, 0x04, 0x6E, 0xE3, 0x0E, 0x3F,
+ 0xFD, 0x20, 0xF9, 0xA4, 0x5B, 0xBD, 0xF6, 0x41,
+ 0x3D, 0x58, 0x3A, 0x2D, 0xBF, 0x59, 0x92, 0x4F,
+ 0xD3, 0x5C
+};
+
+static uint8_t y_qA_secp521r1[] = {
+ 0x00, 0xF6, 0xB6, 0x32, 0xD1, 0x94, 0xC0, 0x38,
+ 0x8E, 0x22, 0xD8, 0x43, 0x7E, 0x55, 0x8C, 0x55,
+ 0x2A, 0xE1, 0x95, 0xAD, 0xFD, 0x15, 0x3F, 0x92,
+ 0xD7, 0x49, 0x08, 0x35, 0x1B, 0x2F, 0x8C, 0x4E,
+ 0xDA, 0x94, 0xED, 0xB0, 0x91, 0x6D, 0x1B, 0x53,
+ 0xC0, 0x20, 0xB5, 0xEE, 0xCA, 0xED, 0x1A, 0x5F,
+ 0xC3, 0x8A, 0x23, 0x3E, 0x48, 0x30, 0x58, 0x7B,
+ 0xB2, 0xEE, 0x34, 0x89, 0xB3, 0xB4, 0x2A, 0x5A,
+ 0x86, 0xA4
+};
+
+static uint8_t dB_secp521r1[] = {
+ 0x00, 0xCE, 0xE3, 0x48, 0x0D, 0x86, 0x45, 0xA1,
+ 0x7D, 0x24, 0x9F, 0x27, 0x76, 0xD2, 0x8B, 0xAE,
+ 0x61, 0x69, 0x52, 0xD1, 0x79, 0x1F, 0xDB, 0x4B,
+ 0x70, 0xF7, 0xC3, 0x37, 0x87, 0x32, 0xAA, 0x1B,
+ 0x22, 0x92, 0x84, 0x48, 0xBC, 0xD1, 0xDC, 0x24,
+ 0x96, 0xD4, 0x35, 0xB0, 0x10, 0x48, 0x06, 0x6E,
+ 0xBE, 0x4F, 0x72, 0x90, 0x3C, 0x36, 0x1B, 0x1A,
+ 0x9D, 0xC1, 0x19, 0x3D, 0xC2, 0xC9, 0xD0, 0x89,
+ 0x1B, 0x96
+};
+
+static uint8_t x_qB_secp521r1[] = {
+ 0x01, 0x0E, 0xBF, 0xAF, 0xC6, 0xE8, 0x5E, 0x08,
+ 0xD2, 0x4B, 0xFF, 0xFC, 0xC1, 0xA4, 0x51, 0x1D,
+ 0xB0, 0xE6, 0x34, 0xBE, 0xEB, 0x1B, 0x6D, 0xEC,
+ 0x8C, 0x59, 0x39, 0xAE, 0x44, 0x76, 0x62, 0x01,
+ 0xAF, 0x62, 0x00, 0x43, 0x0B, 0xA9, 0x7C, 0x8A,
+ 0xC6, 0xA0, 0xE9, 0xF0, 0x8B, 0x33, 0xCE, 0x7E,
+ 0x9F, 0xEE, 0xB5, 0xBA, 0x4E, 0xE5, 0xE0, 0xD8,
+ 0x15, 0x10, 0xC2, 0x42, 0x95, 0xB8, 0xA0, 0x8D,
+ 0x02, 0x35
+};
+
+static uint8_t y_qB_secp521r1[] = {
+ 0x00, 0xA4, 0xA6, 0xEC, 0x30, 0x0D, 0xF9, 0xE2,
+ 0x57, 0xB0, 0x37, 0x2B, 0x5E, 0x7A, 0xBF, 0xEF,
+ 0x09, 0x34, 0x36, 0x71, 0x9A, 0x77, 0x88, 0x7E,
+ 0xBB, 0x0B, 0x18, 0xCF, 0x80, 0x99, 0xB9, 0xF4,
+ 0x21, 0x2B, 0x6E, 0x30, 0xA1, 0x41, 0x9C, 0x18,
+ 0xE0, 0x29, 0xD3, 0x68, 0x63, 0xCC, 0x9D, 0x44,
+ 0x8F, 0x4D, 0xBA, 0x4D, 0x2A, 0x0E, 0x60, 0x71,
+ 0x1B, 0xE5, 0x72, 0x91, 0x5F, 0xBD, 0x4F, 0xEF,
+ 0x26, 0x95
+};
+
+static uint8_t x_Z_secp521r1[] = {
+ 0x00, 0xCD, 0xEA, 0x89, 0x62, 0x1C, 0xFA, 0x46,
+ 0xB1, 0x32, 0xF9, 0xE4, 0xCF, 0xE2, 0x26, 0x1C,
+ 0xDE, 0x2D, 0x43, 0x68, 0xEB, 0x56, 0x56, 0x63,
+ 0x4C, 0x7C, 0xC9, 0x8C, 0x7A, 0x00, 0xCD, 0xE5,
+ 0x4E, 0xD1, 0x86, 0x6A, 0x0D, 0xD3, 0xE6, 0x12,
+ 0x6C, 0x9D, 0x2F, 0x84, 0x5D, 0xAF, 0xF8, 0x2C,
+ 0xEB, 0x1D, 0xA0, 0x8F, 0x5D, 0x87, 0x52, 0x1B,
+ 0xB0, 0xEB, 0xEC, 0xA7, 0x79, 0x11, 0x16, 0x9C,
+ 0x20, 0xCC
+};
+
+static uint8_t y_Z_secp521r1[] = {
+ 0x00, 0xF9, 0xA7, 0x16, 0x41, 0x02, 0x9B, 0x7F,
+ 0xC1, 0xA8, 0x08, 0xAD, 0x07, 0xCD, 0x48, 0x61,
+ 0xE8, 0x68, 0x61, 0x4B, 0x86, 0x5A, 0xFB, 0xEC,
+ 0xAB, 0x1F, 0x2B, 0xD4, 0xD8, 0xB5, 0x5E, 0xBC,
+ 0xB5, 0xE3, 0xA5, 0x31, 0x43, 0xCE, 0xB2, 0xC5,
+ 0x11, 0xB1, 0xAE, 0x0A, 0xF5, 0xAC, 0x82, 0x7F,
+ 0x60, 0xF2, 0xFD, 0x87, 0x25, 0x65, 0xAC, 0x5C,
+ 0xA0, 0xA1, 0x64, 0x03, 0x8F, 0xE9, 0x80, 0xA7,
+ 0xE4, 0xBD
+};
+
+/** ECDH SECP521R1 elliptic curve param */
+
+struct crypto_testsuite_ecdh_params ecdh_param_secp521r1 = {
+ .pubkey_qA_x = {
+ .data = x_qA_secp521r1,
+ .length = sizeof(x_qA_secp521r1),
+ },
+ .pubkey_qA_y = {
+ .data = y_qA_secp521r1,
+ .length = sizeof(y_qA_secp521r1),
+ },
+ .pubkey_qB_x = {
+ .data = x_qB_secp521r1,
+ .length = sizeof(x_qB_secp521r1),
+ },
+ .pubkey_qB_y = {
+ .data = y_qB_secp521r1,
+ .length = sizeof(y_qB_secp521r1),
+ },
+ .pkey_A = {
+ .data = dA_secp521r1,
+ .length = sizeof(dA_secp521r1),
+ },
+ .pkey_B = {
+ .data = dB_secp521r1,
+ .length = sizeof(dB_secp521r1),
+ },
+ .secret_x = {
+ .data = x_Z_secp521r1,
+ .length = sizeof(x_Z_secp521r1),
+ },
+ .secret_y = {
+ .data = y_Z_secp521r1,
+ .length = sizeof(y_Z_secp521r1),
+ },
+ .curve = RTE_CRYPTO_EC_GROUP_SECP521R1
+};
+
+#endif /* __TEST_CRYPTODEV_ECDSA_TEST_VECTORS_H__ */
--
2.25.1
^ permalink raw reply [flat|nested] 9+ messages in thread
* RE: [PATCH v2] test/cryptodev: add ECDH tests
2023-11-08 13:17 ` [PATCH v2] " Gowrishankar Muthukrishnan
@ 2023-11-09 20:24 ` Akhil Goyal
0 siblings, 0 replies; 9+ messages in thread
From: Akhil Goyal @ 2023-11-09 20:24 UTC (permalink / raw)
To: Gowrishankar Muthukrishnan, dev
Cc: Anoob Joseph, Fan Zhang, Gowrishankar Muthukrishnan
> Subject: [PATCH v2] test/cryptodev: add ECDH tests
>
> Add ECDH tests.
>
> Signed-off-by: Gowrishankar Muthukrishnan <gmuthukrishn@marvell.com>
> Change-Id: I88099e2ba8e058fbb519a06d09ebb3ece7c7e27f
> ---
> v2:
> - rebased due to patch conflict.
Applied to dpdk-next-crypto
Removed change-id while merging.
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2023-11-09 20:24 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-10-26 8:15 [PATCH v1 0/4] test/cryptodev: add ECDH tests Gowrishankar Muthukrishnan
2023-10-26 8:15 ` [PATCH v1 1/4] " Gowrishankar Muthukrishnan
2023-10-30 18:48 ` Akhil Goyal
2023-11-08 13:17 ` [PATCH v2] " Gowrishankar Muthukrishnan
2023-11-09 20:24 ` Akhil Goyal
2023-10-26 8:15 ` [PATCH v1 2/4] crypto/cnxk: use generic EC opcodes Gowrishankar Muthukrishnan
2023-10-26 8:15 ` [PATCH v1 3/4] crypto/cnxk: change order of ECFPM params Gowrishankar Muthukrishnan
2023-10-26 8:15 ` [PATCH v1 4/4] crypto/cnxk: add ECDH support Gowrishankar Muthukrishnan
2023-10-30 18:49 ` Akhil Goyal
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).