From: Akhil Goyal <gakhil@marvell.com>
To: Brian Dooley <brian.dooley@intel.com>, Kai Ji <kai.ji@intel.com>,
Pablo de Lara <pablo.de.lara.guarch@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>
Subject: RE: [EXTERNAL] [PATCH v1 3/3] crypto/ipsec_mb: add SM4 algorithm support
Date: Wed, 18 Sep 2024 05:53:05 +0000 [thread overview]
Message-ID: <CO6PR18MB4484999583F5BEB6DA205215D8622@CO6PR18MB4484.namprd18.prod.outlook.com> (raw)
In-Reply-To: <20240906123939.2508919-3-brian.dooley@intel.com>
> This patch introduces SM4 algorithm support to the AESNI_MB PMD.
>
> Signed-off-by: Brian Dooley <brian.dooley@intel.com>
> ---
> drivers/crypto/ipsec_mb/pmd_aesni_mb.c | 22 ++++++++++
> drivers/crypto/ipsec_mb/pmd_aesni_mb_priv.h | 47 +++++++++++++++++++++
> 2 files changed, 69 insertions(+)
Update corresponding .ini file for the newly added algos.
Also update release notes.
>
> diff --git a/drivers/crypto/ipsec_mb/pmd_aesni_mb.c
> b/drivers/crypto/ipsec_mb/pmd_aesni_mb.c
> index 019867fe1c..1dbffb1337 100644
> --- a/drivers/crypto/ipsec_mb/pmd_aesni_mb.c
> +++ b/drivers/crypto/ipsec_mb/pmd_aesni_mb.c
> @@ -451,6 +451,9 @@ aesni_mb_set_session_cipher_parameters(const
> IMB_MGR *mb_mgr,
> uint8_t is_zuc = 0;
> uint8_t is_snow3g = 0;
> uint8_t is_kasumi = 0;
> +#if IMB_VERSION(1, 5, 0) <= IMB_VERSION_NUM
> + uint8_t is_sm4 = 0;
> +#endif
>
> if (xform == NULL) {
> sess->template_job.cipher_mode = IMB_CIPHER_NULL;
> @@ -521,6 +524,16 @@ aesni_mb_set_session_cipher_parameters(const
> IMB_MGR *mb_mgr,
> sess->iv.offset = xform->cipher.iv.offset;
> sess->template_job.iv_len_in_bytes = xform->cipher.iv.length;
> return 0;
> +#if IMB_VERSION(1, 5, 0) <= IMB_VERSION_NUM
> + case RTE_CRYPTO_CIPHER_SM4_CBC:
> + sess->template_job.cipher_mode = IMB_CIPHER_SM4_CBC;
> + is_sm4 = 1;
> + break;
> + case RTE_CRYPTO_CIPHER_SM4_ECB:
> + sess->template_job.cipher_mode = IMB_CIPHER_SM4_ECB;
> + is_sm4 = 1;
> + break;
> +#endif
> default:
> IPSEC_MB_LOG(ERR, "Unsupported cipher mode parameter");
> return -ENOTSUP;
> @@ -655,6 +668,15 @@ aesni_mb_set_session_cipher_parameters(const
> IMB_MGR *mb_mgr,
> &sess-
> >cipher.pKeySched_kasumi_cipher);
> sess->template_job.enc_keys = &sess-
> >cipher.pKeySched_kasumi_cipher;
> sess->template_job.dec_keys = &sess-
> >cipher.pKeySched_kasumi_cipher;
> +#if IMB_VERSION(1, 5, 0) <= IMB_VERSION_NUM
> + } else if (is_sm4) {
> + sess->template_job.key_len_in_bytes = IMB_KEY_128_BYTES;
> + IMB_SM4_KEYEXP(mb_mgr, xform->cipher.key.data,
> + sess->cipher.expanded_sm4_keys.encode,
> + sess->cipher.expanded_sm4_keys.decode);
> + sess->template_job.enc_keys = sess-
> >cipher.expanded_sm4_keys.encode;
> + sess->template_job.dec_keys = sess-
> >cipher.expanded_sm4_keys.decode;
> +#endif
> } else {
> if (xform->cipher.key.length != 8) {
> IPSEC_MB_LOG(ERR, "Invalid cipher key length");
> diff --git a/drivers/crypto/ipsec_mb/pmd_aesni_mb_priv.h
> b/drivers/crypto/ipsec_mb/pmd_aesni_mb_priv.h
> index 24c2686952..e9d605d646 100644
> --- a/drivers/crypto/ipsec_mb/pmd_aesni_mb_priv.h
> +++ b/drivers/crypto/ipsec_mb/pmd_aesni_mb_priv.h
> @@ -774,6 +774,42 @@ static const struct rte_cryptodev_capabilities
> aesni_mb_capabilities[] = {
> }, }
> }, }
> },
> + { /* SM4 CBC */
> + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
> + {.sym = {
> + .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
> + {.cipher = {
> + .algo = RTE_CRYPTO_CIPHER_SM4_CBC,
> + .block_size = 16,
> + .key_size = {
> + .min = 16,
> + .max = 16,
> + .increment = 0
> + },
> + .iv_size = {
> + .min = 16,
> + .max = 16,
> + .increment = 0
> + }
> + }, }
> + }, }
> + },
> + { /* SM4 ECB */
> + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
> + {.sym = {
> + .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
> + {.cipher = {
> + .algo = RTE_CRYPTO_CIPHER_SM4_ECB,
> + .block_size = 16,
> + .key_size = {
> + .min = 16,
> + .max = 16,
> + .increment = 0
> + },
> + .iv_size = { 0 }
> + }, }
> + }, }
> + },
> RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST()
> };
>
> @@ -951,6 +987,17 @@ struct __rte_cache_aligned aesni_mb_session {
> /* *< SNOW3G scheduled cipher key */
> kasumi_key_sched_t pKeySched_kasumi_cipher;
> /* *< KASUMI scheduled cipher key */
> +#if IMB_VERSION(1, 5, 0) <= IMB_VERSION_NUM
> + struct {
> + alignas(16) uint32_t
> encode[IMB_SM4_KEY_SCHEDULE_ROUNDS];
> + /* *< encode key */
> + alignas(16) uint32_t
> decode[IMB_SM4_KEY_SCHEDULE_ROUNDS];
> + /* *< decode key */
> + } expanded_sm4_keys;
> + /* *< Expanded SM4 keys - Original 128 bit key is
> + * expanded into 32 round keys, each 32 bits.
> + */
> +#endif
> };
> } cipher;
>
> --
> 2.25.1
next prev parent reply other threads:[~2024-09-18 5:53 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-06 12:39 [PATCH v1 1/3] crypto/ipsec_mb: add SM3 " Brian Dooley
2024-09-06 12:39 ` [PATCH v1 2/3] crypto/ipsec_mb: add HMAC " Brian Dooley
2024-09-06 12:39 ` [PATCH v1 3/3] crypto/ipsec_mb: add SM4 " Brian Dooley
2024-09-18 5:53 ` Akhil Goyal [this message]
2024-09-30 13:55 ` [PATCH v2 1/4] crypto/ipsec_mb: add SM3 " Brian Dooley
2024-09-30 13:55 ` [PATCH v2 2/4] crypto/ipsec_mb: add HMAC " Brian Dooley
2024-09-30 13:55 ` [PATCH v2 3/4] crypto/ipsec_mb: add SM4 " Brian Dooley
2024-09-30 13:55 ` [PATCH v2 4/4] doc: updated feature matrix for AESNI MB PMD Brian Dooley
2024-10-01 7:59 ` [EXTERNAL] " Akhil Goyal
2024-10-01 8:40 ` Dooley, Brian
2024-10-01 8:00 ` Akhil Goyal
2024-10-03 17:05 ` [PATCH v3 1/3] crypto/ipsec_mb: add SM3 algorithm support Brian Dooley
2024-10-03 17:05 ` [PATCH v3 2/3] crypto/ipsec_mb: add HMAC " Brian Dooley
2024-10-04 12:05 ` De Lara Guarch, Pablo
2024-10-03 17:05 ` [PATCH v3 3/3] crypto/ipsec_mb: add SM4 " Brian Dooley
2024-10-04 12:05 ` De Lara Guarch, Pablo
2024-10-04 12:05 ` [PATCH v3 1/3] crypto/ipsec_mb: add SM3 " De Lara Guarch, Pablo
2024-10-09 15:21 ` Akhil Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CO6PR18MB4484999583F5BEB6DA205215D8622@CO6PR18MB4484.namprd18.prod.outlook.com \
--to=gakhil@marvell.com \
--cc=brian.dooley@intel.com \
--cc=dev@dpdk.org \
--cc=kai.ji@intel.com \
--cc=pablo.de.lara.guarch@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).