* [PATCH] maintainers: updated for Intel drivers @ 2024-01-17 10:17 qiming.yang 2024-01-18 5:21 ` Ubuntu Upgrade 20.04.6 to 22.04 Jammy 23.06 HomeGateway example James Tervit 2024-01-29 16:49 ` [PATCH] maintainers: updated for Intel drivers Thomas Monjalon 0 siblings, 2 replies; 4+ messages in thread From: qiming.yang @ 2024-01-17 10:17 UTC (permalink / raw) To: dev; +Cc: Qiming Yang From: Qiming Yang <qiming.yang@intel.com> Remove the maintainer that no longer work. Signed-off-by: Qiming Yang <qiming.yang@intel.com> --- MAINTAINERS | 2 -- 1 file changed, 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 0d1c8126e3..230549ca94 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -749,7 +749,6 @@ F: doc/guides/nics/features/e1000.ini F: doc/guides/nics/features/igb*.ini Intel ixgbe -M: Qiming Yang <qiming.yang@intel.com> M: Wenjun Wu <wenjun1.wu@intel.com> T: git://dpdk.org/next/dpdk-next-net-intel F: drivers/net/ixgbe/ @@ -783,7 +782,6 @@ F: drivers/common/iavf/ F: doc/guides/nics/features/iavf*.ini Intel ice -M: Qiming Yang <qiming.yang@intel.com> M: Qi Zhang <qi.z.zhang@intel.com> T: git://dpdk.org/next/dpdk-next-net-intel F: drivers/net/ice/ -- 2.34.1 ^ permalink raw reply [flat|nested] 4+ messages in thread
* Ubuntu Upgrade 20.04.6 to 22.04 Jammy 23.06 HomeGateway example 2024-01-17 10:17 [PATCH] maintainers: updated for Intel drivers qiming.yang @ 2024-01-18 5:21 ` James Tervit 2024-01-18 15:06 ` James Tervit 2024-01-29 16:49 ` [PATCH] maintainers: updated for Intel drivers Thomas Monjalon 1 sibling, 1 reply; 4+ messages in thread From: James Tervit @ 2024-01-18 5:21 UTC (permalink / raw) To: dev [-- Attachment #1: Type: text/plain, Size: 9387 bytes --] Dear DPDK Folks, I am following the latest build of home gateway https://s3-docs.fd.io/vpp/23.06/usecases/home_gateway.html for testing and development. Running Linux PXC-SM-002 5.15.0-91-generic #101-Ubuntu vpp/jammy,now 23.10-release amd64 [installed] PRETTY_NAME="Ubuntu 22.04.3 LTS" NAME="Ubuntu" VERSION_ID="22.04" VERSION="22.04.3 LTS (Jammy Jellyfish)" In my vpp startup.conf, which is calling setup.gate and, in turn, runs setup.tmpl I get an error on systemd in bold below. Jan 18 04:23:34 PXC-SM-002 vpp[224896]: set interface l2 bridge: unknown interface `GigabitEthernetb7/0/0 1' Jan 18 04:23:34 PXC-SM-002 vpp[224896]: exec: CLI line error: GigabitEthernetb7/0/0 1 (this is related to setup.tmpl section) Jan 18 04:23:34 PXC-SM-002 vpp[224896]: exec: CLI line error: setup.gate runs define HOSTNAME Gate-001 define TRUNK GigabitEthernet65/0/0 comment { Specific MAC address yields a constant IP address } define TRUNK_MACADDR 3c:ec:ef:da:89:58 define BVI_MACADDR 3c:ce:fe:ad:01:02 comment { inside subnet 192.168.<inside_subnet>.0/24 } define INSIDE_SUBNET 1 comment { Adjust as needed to match PCI addresses of inside network ports } define INSIDE_PORT1 GigabitEthernet65/0/1 define INSIDE_PORT2 GigabitEthernet65/0/2 define INSIDE_PORT3 GigabitEthernet65/0/3 define INSIDE_PORT4 GigabitEthernetb7/0/0 define INSIDE_PORT5 GigabitEthernetb7/0/1 define INSIDE_PORT6 GigabitEthernetb7/0/3 comment { feature selections } define FEATURE_ADL uncomment define FEATURE_NAT44 uncomment define FEATURE_CNAT comment define FEATURE_DNS comment define FEATURE_IP6 comment define FEATURE_IKE_RESPONDER comment define FEATURE_MACTIME uncomment define FEATURE_OVPN uncomment define FEATURE_MODEM_ROUTE uncomment exec /home/pxcghost/VPP/pxc-gate/setup.tmpl The setup.tmpl tries to create inside ports and, for some reason, fails on one port and stops processing. show macro set int mac address $(TRUNK) $(TRUNK_MACADDR) set dhcp client intfc $(TRUNK) hostname $(HOSTNAME) set int state $(TRUNK) up bvi create instance 0 set int mac address bvi0 $(BVI_MACADDR) set int l2 bridge bvi0 1 bvi set int ip address bvi0 192.168.$(INSIDE_SUBNET).1/24 set int state bvi0 up set int l2 bridge $(INSIDE_PORT1) 1 set int state $(INSIDE_PORT1) up set int l2 bridge $(INSIDE_PORT2) 1 set int state $(INSIDE_PORT2) up set int l2 bridge $(INSIDE_PORT3) 1 set int state $(INSIDE_PORT3) up set int l2 bridge $(INSIDE_PORT4) 1 set int state $(INSIDE_PORT4) up set int l2 bridge $(INSIDE_PORT5) 1 set int state $(INSIDE_PORT5) up set int l2 bridge $(INSIDE_PORT6) 1 set int state $(INSIDE_PORT6) up comment { dhcp server and host-stack access } create tap host-if-name lstack host-ip4-addr 192.168.$(INSIDE_SUBNET).2/24 host-ip4-gw 192.168.$(INSIDE_SUBNET).1 set int l2 bridge tap0 1 set int state tap0 up service restart isc-dhcp-server $(FEATURE_ADL) { bin adl_interface_enable_disable $(TRUNK) } $(FEATURE_ADL) { ip table 1 } $(FEATURE_ADL) { ip route add table 1 0.0.0.0/0 via local } $(FEATURE_NAT44) { nat44 forwarding enable } $(FEATURE_NAT44) { nat44 plugin enable sessions 63000 } $(FEATURE_NAT44) { nat44 add interface address $(TRUNK) } $(FEATURE_NAT44) { set interface nat44 in bvi0 out $(TRUNK) } comment { iPhones seem to need lots of RA messages... } $(FEATURE_IP6) { ip6 nd bvi0 ra-managed-config-flag ra-other-config-flag ra-interval 30 20 ra-lifetime 180 } comment { ip6 nd bvi0 prefix 0::0/0 ra-lifetime 100000 } comment { if using the mactime plugin, configure it } $(FEATURE_MACTIME) { bin mactime_add_del_range name roku mac 3c:ec:ef:da:89:58 allow-static } $(FEATURE_MACTIME) { bin mactime_enable_disable $(INSIDE_PORT1) } $(FEATURE_MACTIME) { bin mactime_enable_disable $(INSIDE_PORT2) } $(FEATURE_MACTIME) { bin mactime_enable_disable $(INSIDE_PORT3) } $(FEATURE_MACTIME) { bin mactime_enable_disable $(INSIDE_PORT4) } $(FEATURE_MODEM_ROUTE) { ip route add 192.168.1.1/23 via $(TRUNK) } for some reason, port4 fails as per the system, and I think it fails on the DHCP part of the script; any pointers are appreciated. I can bind ports and unbind back to kernel with no problem, and I can see the interfaces inside vpp and bvi look ok. sudo vppctl show interface, ip addresses not assigned as I think that’s because the script doesn’t process the lstack and dhcp portion due to crashing. Name Idx State MTU (L3/IP4/IP6/MPLS) Counter Count GigabitEthernet65/0/0 1 up 9000/0/0/0 rx packets 585 rx bytes 72405 tx packets 3 tx bytes 1002 drops 585 ip4 228 ip6 26 GigabitEthernet65/0/1 2 up 9000/0/0/0 GigabitEthernet65/0/2 3 up 9000/0/0/0 GigabitEthernet65/0/3 4 up 9000/0/0/0 TenGigabitEthernetb7/0/0 5 down 9000/0/0/0 TenGigabitEthernetb7/0/1 6 down 9000/0/0/0 TenGigabitEthernetb7/0/3 7 down 9000/0/0/0 bvi0 8 up 9000/0/0/0 local0 0 down 0/0/0/0 Network devices using DPDK-compatible driver ============================================ 0000:65:00.0 'I350 Gigabit Network Connection 1521' drv=vfio-pci unused=igb,igb_uio,uio_pci_generic 0000:65:00.1 'I350 Gigabit Network Connection 1521' drv=igb_uio unused=igb,vfio-pci,uio_pci_generic 0000:65:00.2 'I350 Gigabit Network Connection 1521' drv=igb_uio unused=igb,vfio-pci,uio_pci_generic 0000:65:00.3 'I350 Gigabit Network Connection 1521' drv=igb_uio unused=igb,vfio-pci,uio_pci_generic 0000:b7:00.0 'Ethernet Connection X722 for 10GBASE-T 37d2' drv=igb_uio unused=i40e,vfio-pci,uio_pci_generic 0000:b7:00.1 'Ethernet Connection X722 for 10GBASE-T 37d2' drv=igb_uio unused=i40e,vfio-pci,uio_pci_generic 0000:b7:00.3 'Ethernet Connection X722 for 10GbE SFP+ 37d0' drv=igb_uio unused=i40e,vfio-pci,uio_pci_generic Network devices using kernel driver =================================== 0000:b7:00.2 'Ethernet Connection X722 for 10GbE SFP+ 37d0' if=eno7 drv=i40e unused=igb_uio,vfio-pci,uio_pci_generic *Active* No 'Baseband' devices detected ============================== Crypto devices using kernel driver ================================== 0000:b5:00.0 'C62x Chipset QuickAssist Technology 37c8' drv=c6xx unused=qat_c62x,igb_uio,vfio-pci,uio_pci_generic 0000:b6:00.0 'C62x Chipset QuickAssist Technology 37c8' drv=c6xx unused=qat_c62x,igb_uio,vfio-pci,uio_pci_generic DMA devices using kernel driver =============================== 0000:00:04.0 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic 0000:00:04.1 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic 0000:00:04.2 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic 0000:00:04.3 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic 0000:00:04.4 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic 0000:00:04.5 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic 0000:00:04.6 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic 0000:00:04.7 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic No 'Eventdev' devices detected ============================== No 'Mempool' devices detected ============================= No 'Compress' devices detected ============================== No 'Misc (rawdev)' devices detected =================================== No 'Regex' devices detected Bus info Device Class Description ======================================================= pci@0000:65:00.0<mailto:pci@0000:65:00.0> network I350 Gigabit Network Connection pci@0000:65:00.1<mailto:pci@0000:65:00.1> network I350 Gigabit Network Connection pci@0000:65:00.2<mailto:pci@0000:65:00.2> network I350 Gigabit Network Connection pci@0000:65:00.3<mailto:pci@0000:65:00.3> network I350 Gigabit Network Connection pci@0000:b7:00.0<mailto:pci@0000:b7:00.0> network Ethernet Connection X722 for 10GBASE-T pci@0000:b7:00.1<mailto:pci@0000:b7:00.1> network Ethernet Connection X722 for 10GBASE-T pci@0000:b7:00.2<mailto:pci@0000:b7:00.2> eno7 network Ethernet Connection X722 for 10GbE SFP+ pci@0000:b7:00.3<mailto:pci@0000:b7:00.3> network Ethernet Connection X722 for 10GbE SFP+ eno7 is reserved to allow me remote access on kernel. Any pointers greatly appreciated [-- Attachment #2: Type: text/html, Size: 30731 bytes --] ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Ubuntu Upgrade 20.04.6 to 22.04 Jammy 23.06 HomeGateway example 2024-01-18 5:21 ` Ubuntu Upgrade 20.04.6 to 22.04 Jammy 23.06 HomeGateway example James Tervit @ 2024-01-18 15:06 ` James Tervit 0 siblings, 0 replies; 4+ messages in thread From: James Tervit @ 2024-01-18 15:06 UTC (permalink / raw) To: dev [-- Attachment #1: Type: text/plain, Size: 9692 bytes --] After debugging this, I found a spurious port, which was renamed, and it all started working. Thanks From: James Tervit <James.Tervit@ewitech.co.uk> Date: Thursday, 18 January 2024 at 13:22 To: dev@dpdk.org <dev@dpdk.org> Subject: Ubuntu Upgrade 20.04.6 to 22.04 Jammy 23.06 HomeGateway example Dear DPDK Folks, I am following the latest build of home gateway https://s3-docs.fd.io/vpp/23.06/usecases/home_gateway.html for testing and development. Running Linux PXC-SM-002 5.15.0-91-generic #101-Ubuntu vpp/jammy,now 23.10-release amd64 [installed] PRETTY_NAME="Ubuntu 22.04.3 LTS" NAME="Ubuntu" VERSION_ID="22.04" VERSION="22.04.3 LTS (Jammy Jellyfish)" In my vpp startup.conf, which is calling setup.gate and, in turn, runs setup.tmpl I get an error on systemd in bold below. Jan 18 04:23:34 PXC-SM-002 vpp[224896]: set interface l2 bridge: unknown interface `GigabitEthernetb7/0/0 1' Jan 18 04:23:34 PXC-SM-002 vpp[224896]: exec: CLI line error: GigabitEthernetb7/0/0 1 (this is related to setup.tmpl section) Jan 18 04:23:34 PXC-SM-002 vpp[224896]: exec: CLI line error: setup.gate runs define HOSTNAME Gate-001 define TRUNK GigabitEthernet65/0/0 comment { Specific MAC address yields a constant IP address } define TRUNK_MACADDR 3c:ec:ef:da:89:58 define BVI_MACADDR 3c:ce:fe:ad:01:02 comment { inside subnet 192.168.<inside_subnet>.0/24 } define INSIDE_SUBNET 1 comment { Adjust as needed to match PCI addresses of inside network ports } define INSIDE_PORT1 GigabitEthernet65/0/1 define INSIDE_PORT2 GigabitEthernet65/0/2 define INSIDE_PORT3 GigabitEthernet65/0/3 define INSIDE_PORT4 GigabitEthernetb7/0/0 define INSIDE_PORT5 GigabitEthernetb7/0/1 define INSIDE_PORT6 GigabitEthernetb7/0/3 comment { feature selections } define FEATURE_ADL uncomment define FEATURE_NAT44 uncomment define FEATURE_CNAT comment define FEATURE_DNS comment define FEATURE_IP6 comment define FEATURE_IKE_RESPONDER comment define FEATURE_MACTIME uncomment define FEATURE_OVPN uncomment define FEATURE_MODEM_ROUTE uncomment exec /home/pxcghost/VPP/pxc-gate/setup.tmpl The setup.tmpl tries to create inside ports and, for some reason, fails on one port and stops processing. show macro set int mac address $(TRUNK) $(TRUNK_MACADDR) set dhcp client intfc $(TRUNK) hostname $(HOSTNAME) set int state $(TRUNK) up bvi create instance 0 set int mac address bvi0 $(BVI_MACADDR) set int l2 bridge bvi0 1 bvi set int ip address bvi0 192.168.$(INSIDE_SUBNET).1/24 set int state bvi0 up set int l2 bridge $(INSIDE_PORT1) 1 set int state $(INSIDE_PORT1) up set int l2 bridge $(INSIDE_PORT2) 1 set int state $(INSIDE_PORT2) up set int l2 bridge $(INSIDE_PORT3) 1 set int state $(INSIDE_PORT3) up set int l2 bridge $(INSIDE_PORT4) 1 set int state $(INSIDE_PORT4) up set int l2 bridge $(INSIDE_PORT5) 1 set int state $(INSIDE_PORT5) up set int l2 bridge $(INSIDE_PORT6) 1 set int state $(INSIDE_PORT6) up comment { dhcp server and host-stack access } create tap host-if-name lstack host-ip4-addr 192.168.$(INSIDE_SUBNET).2/24 host-ip4-gw 192.168.$(INSIDE_SUBNET).1 set int l2 bridge tap0 1 set int state tap0 up service restart isc-dhcp-server $(FEATURE_ADL) { bin adl_interface_enable_disable $(TRUNK) } $(FEATURE_ADL) { ip table 1 } $(FEATURE_ADL) { ip route add table 1 0.0.0.0/0 via local } $(FEATURE_NAT44) { nat44 forwarding enable } $(FEATURE_NAT44) { nat44 plugin enable sessions 63000 } $(FEATURE_NAT44) { nat44 add interface address $(TRUNK) } $(FEATURE_NAT44) { set interface nat44 in bvi0 out $(TRUNK) } comment { iPhones seem to need lots of RA messages... } $(FEATURE_IP6) { ip6 nd bvi0 ra-managed-config-flag ra-other-config-flag ra-interval 30 20 ra-lifetime 180 } comment { ip6 nd bvi0 prefix 0::0/0 ra-lifetime 100000 } comment { if using the mactime plugin, configure it } $(FEATURE_MACTIME) { bin mactime_add_del_range name roku mac 3c:ec:ef:da:89:58 allow-static } $(FEATURE_MACTIME) { bin mactime_enable_disable $(INSIDE_PORT1) } $(FEATURE_MACTIME) { bin mactime_enable_disable $(INSIDE_PORT2) } $(FEATURE_MACTIME) { bin mactime_enable_disable $(INSIDE_PORT3) } $(FEATURE_MACTIME) { bin mactime_enable_disable $(INSIDE_PORT4) } $(FEATURE_MODEM_ROUTE) { ip route add 192.168.1.1/23 via $(TRUNK) } for some reason, port4 fails as per the system, and I think it fails on the DHCP part of the script; any pointers are appreciated. I can bind ports and unbind back to kernel with no problem, and I can see the interfaces inside vpp and bvi look ok. sudo vppctl show interface, ip addresses not assigned as I think that’s because the script doesn’t process the lstack and dhcp portion due to crashing. Name Idx State MTU (L3/IP4/IP6/MPLS) Counter Count GigabitEthernet65/0/0 1 up 9000/0/0/0 rx packets 585 rx bytes 72405 tx packets 3 tx bytes 1002 drops 585 ip4 228 ip6 26 GigabitEthernet65/0/1 2 up 9000/0/0/0 GigabitEthernet65/0/2 3 up 9000/0/0/0 GigabitEthernet65/0/3 4 up 9000/0/0/0 TenGigabitEthernetb7/0/0 5 down 9000/0/0/0 TenGigabitEthernetb7/0/1 6 down 9000/0/0/0 TenGigabitEthernetb7/0/3 7 down 9000/0/0/0 bvi0 8 up 9000/0/0/0 local0 0 down 0/0/0/0 Network devices using DPDK-compatible driver ============================================ 0000:65:00.0 'I350 Gigabit Network Connection 1521' drv=vfio-pci unused=igb,igb_uio,uio_pci_generic 0000:65:00.1 'I350 Gigabit Network Connection 1521' drv=igb_uio unused=igb,vfio-pci,uio_pci_generic 0000:65:00.2 'I350 Gigabit Network Connection 1521' drv=igb_uio unused=igb,vfio-pci,uio_pci_generic 0000:65:00.3 'I350 Gigabit Network Connection 1521' drv=igb_uio unused=igb,vfio-pci,uio_pci_generic 0000:b7:00.0 'Ethernet Connection X722 for 10GBASE-T 37d2' drv=igb_uio unused=i40e,vfio-pci,uio_pci_generic 0000:b7:00.1 'Ethernet Connection X722 for 10GBASE-T 37d2' drv=igb_uio unused=i40e,vfio-pci,uio_pci_generic 0000:b7:00.3 'Ethernet Connection X722 for 10GbE SFP+ 37d0' drv=igb_uio unused=i40e,vfio-pci,uio_pci_generic Network devices using kernel driver =================================== 0000:b7:00.2 'Ethernet Connection X722 for 10GbE SFP+ 37d0' if=eno7 drv=i40e unused=igb_uio,vfio-pci,uio_pci_generic *Active* No 'Baseband' devices detected ============================== Crypto devices using kernel driver ================================== 0000:b5:00.0 'C62x Chipset QuickAssist Technology 37c8' drv=c6xx unused=qat_c62x,igb_uio,vfio-pci,uio_pci_generic 0000:b6:00.0 'C62x Chipset QuickAssist Technology 37c8' drv=c6xx unused=qat_c62x,igb_uio,vfio-pci,uio_pci_generic DMA devices using kernel driver =============================== 0000:00:04.0 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic 0000:00:04.1 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic 0000:00:04.2 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic 0000:00:04.3 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic 0000:00:04.4 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic 0000:00:04.5 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic 0000:00:04.6 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic 0000:00:04.7 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic No 'Eventdev' devices detected ============================== No 'Mempool' devices detected ============================= No 'Compress' devices detected ============================== No 'Misc (rawdev)' devices detected =================================== No 'Regex' devices detected Bus info Device Class Description ======================================================= pci@0000:65:00.0<mailto:pci@0000:65:00.0> network I350 Gigabit Network Connection pci@0000:65:00.1<mailto:pci@0000:65:00.1> network I350 Gigabit Network Connection pci@0000:65:00.2<mailto:pci@0000:65:00.2> network I350 Gigabit Network Connection pci@0000:65:00.3<mailto:pci@0000:65:00.3> network I350 Gigabit Network Connection pci@0000:b7:00.0<mailto:pci@0000:b7:00.0> network Ethernet Connection X722 for 10GBASE-T pci@0000:b7:00.1<mailto:pci@0000:b7:00.1> network Ethernet Connection X722 for 10GBASE-T pci@0000:b7:00.2<mailto:pci@0000:b7:00.2> eno7 network Ethernet Connection X722 for 10GbE SFP+ pci@0000:b7:00.3<mailto:pci@0000:b7:00.3> network Ethernet Connection X722 for 10GbE SFP+ eno7 is reserved to allow me remote access on kernel. Any pointers greatly appreciated [-- Attachment #2: Type: text/html, Size: 32092 bytes --] ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] maintainers: updated for Intel drivers 2024-01-17 10:17 [PATCH] maintainers: updated for Intel drivers qiming.yang 2024-01-18 5:21 ` Ubuntu Upgrade 20.04.6 to 22.04 Jammy 23.06 HomeGateway example James Tervit @ 2024-01-29 16:49 ` Thomas Monjalon 1 sibling, 0 replies; 4+ messages in thread From: Thomas Monjalon @ 2024-01-29 16:49 UTC (permalink / raw) To: Qiming Yang; +Cc: dev 17/01/2024 11:17, qiming.yang@intel.com: > From: Qiming Yang <qiming.yang@intel.com> > > Remove the maintainer that no longer work. > > Signed-off-by: Qiming Yang <qiming.yang@intel.com> Sorry to see you leaving. Applied ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2024-01-29 16:49 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2024-01-17 10:17 [PATCH] maintainers: updated for Intel drivers qiming.yang 2024-01-18 5:21 ` Ubuntu Upgrade 20.04.6 to 22.04 Jammy 23.06 HomeGateway example James Tervit 2024-01-18 15:06 ` James Tervit 2024-01-29 16:49 ` [PATCH] maintainers: updated for Intel drivers Thomas Monjalon
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).