[dpdk-dev] [PATCH 1/2] crypto/ccp: enable CCP crypto poll mode driver by default

[dpdk-dev] [PATCH 1/2] crypto/ccp: enable CCP crypto poll mode driver by default

[Ravi Kumar]

Signed-off-by: Ravi Kumar <Ravi1.kumar@amd.com>
---
 config/common_base | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/config/common_base b/config/common_base
index 03a8688..802035b 100644
--- a/config/common_base
+++ b/config/common_base
@@ -555,7 +555,7 @@ CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
 #
 # Compile PMD for AMD CCP crypto device
 #
-CONFIG_RTE_LIBRTE_PMD_CCP=n
+CONFIG_RTE_LIBRTE_PMD_CCP=y
 CONFIG_RTE_LIBRTE_PMD_CCP_CPU_AUTH=n
 
 #
-- 
2.7.4

[dpdk-dev] [PATCH 2/2] crypto/ccp: change to command line option from compile time

[Ravi Kumar]

CCP PMD supports authentication offload to either of CCP or
CPU. The earlier version of patch provided this option as
compile time. This patch changes this option from compile time
to run time. User can pass "ccp_auth_opt=1" as an additional
argument to vdev parameter to enable authentication
operations on CPU.

Signed-off-by: Ravi Kumar <Ravi1.kumar@amd.com>
---
 config/common_base                   |   1 -
 doc/guides/cryptodevs/ccp.rst        |  13 +-
 drivers/crypto/ccp/ccp_crypto.c      | 413 +++++++++++++++++------------------
 drivers/crypto/ccp/ccp_crypto.h      |  10 +-
 drivers/crypto/ccp/ccp_pmd_ops.c     |   6 +-
 drivers/crypto/ccp/ccp_pmd_private.h |   6 +-
 drivers/crypto/ccp/rte_ccp_pmd.c     | 226 +++++++++++++++++--
 7 files changed, 421 insertions(+), 254 deletions(-)

diff --git a/config/common_base b/config/common_base
index 802035b..ad24402 100644
--- a/config/common_base
+++ b/config/common_base
@@ -556,7 +556,6 @@ CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
 # Compile PMD for AMD CCP crypto device
 #
 CONFIG_RTE_LIBRTE_PMD_CCP=y
-CONFIG_RTE_LIBRTE_PMD_CCP_CPU_AUTH=n
 
 #
 # Compile PMD for Marvell Crypto device
diff --git a/doc/guides/cryptodevs/ccp.rst b/doc/guides/cryptodevs/ccp.rst
index 1fcd462..cdb9374 100644
--- a/doc/guides/cryptodevs/ccp.rst
+++ b/doc/guides/cryptodevs/ccp.rst
@@ -56,14 +56,11 @@ AEAD algorithms:
 Installation
 ------------
 
-To compile CCP PMD, it has to be enabled in the config/common_base file.
+To compile CCP PMD, ensure that following is enabled in your DPDK configuration file.
 * ``CONFIG_RTE_LIBRTE_PMD_CCP=y``
 
-The CCP PMD also supports computing authentication over CPU with cipher offloaded
-to CCP. To enable this feature, enable following in the configuration.
-* ``CONFIG_RTE_LIBRTE_PMD_CCP_CPU_AUTH=y``
-
-This code was verified on Ubuntu 16.04.
+The CCP PMD also supports computing authentication over CPU with cipher offloaded to CCP.
+To enable this feature, pass an additional argument as ccp_auth_opt=1 to --vdev parameters.
 
 Initialization
 --------------
@@ -98,5 +95,5 @@ To verify real traffic l2fwd-crypto example can be used with following command:
 Limitations
 -----------
 
-* Chained mbufs are not supported
-* MD5_HMAC is supported only if ``CONFIG_RTE_LIBRTE_PMD_CCP_CPU_AUTH=y`` is enabled in configuration
+* Chained mbufs are not supported.
+* MD5_HMAC is supported only for CPU based authentication.
diff --git a/drivers/crypto/ccp/ccp_crypto.c b/drivers/crypto/ccp/ccp_crypto.c
index a0809e4..3ce0f39 100644
--- a/drivers/crypto/ccp/ccp_crypto.c
+++ b/drivers/crypto/ccp/ccp_crypto.c
@@ -27,11 +27,9 @@
 #include "ccp_pci.h"
 #include "ccp_pmd_private.h"
 
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
 #include <openssl/conf.h>
 #include <openssl/err.h>
 #include <openssl/hmac.h>
-#endif
 
 /* SHA initial context values */
 static uint32_t ccp_sha1_init[SHA_COMMON_DIGEST_SIZE / sizeof(uint32_t)] = {
@@ -766,17 +764,19 @@ ccp_configure_session_auth(struct ccp_session *sess,
 	else
 		sess->auth.op = CCP_AUTH_OP_VERIFY;
 	switch (auth_xform->algo) {
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
 	case RTE_CRYPTO_AUTH_MD5_HMAC:
-		sess->auth.algo = CCP_AUTH_ALGO_MD5_HMAC;
-		sess->auth.offset = (CCP_SB_BYTES << 1) - MD5_DIGEST_SIZE;
-		sess->auth.key_length = auth_xform->key.length;
-		sess->auth.block_size = MD5_BLOCK_SIZE;
-		memset(sess->auth.key, 0, sess->auth.block_size);
-		rte_memcpy(sess->auth.key, auth_xform->key.data,
-			   auth_xform->key.length);
+		if (sess->auth_opt) {
+			sess->auth.algo = CCP_AUTH_ALGO_MD5_HMAC;
+			sess->auth.offset = ((CCP_SB_BYTES << 1) -
+					     MD5_DIGEST_SIZE);
+			sess->auth.key_length = auth_xform->key.length;
+			sess->auth.block_size = MD5_BLOCK_SIZE;
+			memset(sess->auth.key, 0, sess->auth.block_size);
+			rte_memcpy(sess->auth.key, auth_xform->key.data,
+				   auth_xform->key.length);
+		} else
+			return -1; /* HMAC MD5 not supported on CCP */
 		break;
-#endif
 	case RTE_CRYPTO_AUTH_SHA1:
 		sess->auth.engine = CCP_ENGINE_SHA;
 		sess->auth.algo = CCP_AUTH_ALGO_SHA1;
@@ -786,33 +786,34 @@ ccp_configure_session_auth(struct ccp_session *sess,
 		sess->auth.offset = CCP_SB_BYTES - SHA1_DIGEST_SIZE;
 		break;
 	case RTE_CRYPTO_AUTH_SHA1_HMAC:
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-		if (auth_xform->key.length > SHA1_BLOCK_SIZE)
-			return -1;
-		sess->auth.algo = CCP_AUTH_ALGO_SHA1_HMAC;
-		sess->auth.offset = CCP_SB_BYTES - SHA1_DIGEST_SIZE;
-		sess->auth.block_size = SHA1_BLOCK_SIZE;
-		sess->auth.key_length = auth_xform->key.length;
-		memset(sess->auth.key, 0, sess->auth.block_size);
-		rte_memcpy(sess->auth.key, auth_xform->key.data,
-			   auth_xform->key.length);
-#else
-		if (auth_xform->key.length > SHA1_BLOCK_SIZE)
-			return -1;
-		sess->auth.engine = CCP_ENGINE_SHA;
-		sess->auth.algo = CCP_AUTH_ALGO_SHA1_HMAC;
-		sess->auth.ut.sha_type = CCP_SHA_TYPE_1;
-		sess->auth.ctx_len = CCP_SB_BYTES;
-		sess->auth.offset = CCP_SB_BYTES - SHA1_DIGEST_SIZE;
-		sess->auth.block_size = SHA1_BLOCK_SIZE;
-		sess->auth.key_length = auth_xform->key.length;
-		memset(sess->auth.key, 0, sess->auth.block_size);
-		memset(sess->auth.pre_compute, 0, sess->auth.ctx_len << 1);
-		rte_memcpy(sess->auth.key, auth_xform->key.data,
-			   auth_xform->key.length);
-		if (generate_partial_hash(sess))
-			return -1;
-#endif
+		if (sess->auth_opt) {
+			if (auth_xform->key.length > SHA1_BLOCK_SIZE)
+				return -1;
+			sess->auth.algo = CCP_AUTH_ALGO_SHA1_HMAC;
+			sess->auth.offset = CCP_SB_BYTES - SHA1_DIGEST_SIZE;
+			sess->auth.block_size = SHA1_BLOCK_SIZE;
+			sess->auth.key_length = auth_xform->key.length;
+			memset(sess->auth.key, 0, sess->auth.block_size);
+			rte_memcpy(sess->auth.key, auth_xform->key.data,
+				   auth_xform->key.length);
+		} else {
+			if (auth_xform->key.length > SHA1_BLOCK_SIZE)
+				return -1;
+			sess->auth.engine = CCP_ENGINE_SHA;
+			sess->auth.algo = CCP_AUTH_ALGO_SHA1_HMAC;
+			sess->auth.ut.sha_type = CCP_SHA_TYPE_1;
+			sess->auth.ctx_len = CCP_SB_BYTES;
+			sess->auth.offset = CCP_SB_BYTES - SHA1_DIGEST_SIZE;
+			sess->auth.block_size = SHA1_BLOCK_SIZE;
+			sess->auth.key_length = auth_xform->key.length;
+			memset(sess->auth.key, 0, sess->auth.block_size);
+			memset(sess->auth.pre_compute, 0,
+			       sess->auth.ctx_len << 1);
+			rte_memcpy(sess->auth.key, auth_xform->key.data,
+				   auth_xform->key.length);
+			if (generate_partial_hash(sess))
+				return -1;
+		}
 		break;
 	case RTE_CRYPTO_AUTH_SHA224:
 		sess->auth.algo = CCP_AUTH_ALGO_SHA224;
@@ -823,33 +824,34 @@ ccp_configure_session_auth(struct ccp_session *sess,
 		sess->auth.offset = CCP_SB_BYTES - SHA224_DIGEST_SIZE;
 		break;
 	case RTE_CRYPTO_AUTH_SHA224_HMAC:
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-		if (auth_xform->key.length > SHA224_BLOCK_SIZE)
-			return -1;
-		sess->auth.algo = CCP_AUTH_ALGO_SHA224_HMAC;
-		sess->auth.offset = CCP_SB_BYTES - SHA224_DIGEST_SIZE;
-		sess->auth.block_size = SHA224_BLOCK_SIZE;
-		sess->auth.key_length = auth_xform->key.length;
-		memset(sess->auth.key, 0, sess->auth.block_size);
-		rte_memcpy(sess->auth.key, auth_xform->key.data,
-			   auth_xform->key.length);
-#else
-		if (auth_xform->key.length > SHA224_BLOCK_SIZE)
-			return -1;
-		sess->auth.algo = CCP_AUTH_ALGO_SHA224_HMAC;
-		sess->auth.engine = CCP_ENGINE_SHA;
-		sess->auth.ut.sha_type = CCP_SHA_TYPE_224;
-		sess->auth.ctx_len = CCP_SB_BYTES;
-		sess->auth.offset = CCP_SB_BYTES - SHA224_DIGEST_SIZE;
-		sess->auth.block_size = SHA224_BLOCK_SIZE;
-		sess->auth.key_length = auth_xform->key.length;
-		memset(sess->auth.key, 0, sess->auth.block_size);
-		memset(sess->auth.pre_compute, 0, sess->auth.ctx_len << 1);
-		rte_memcpy(sess->auth.key, auth_xform->key.data,
-			   auth_xform->key.length);
-		if (generate_partial_hash(sess))
-			return -1;
-#endif
+		if (sess->auth_opt) {
+			if (auth_xform->key.length > SHA224_BLOCK_SIZE)
+				return -1;
+			sess->auth.algo = CCP_AUTH_ALGO_SHA224_HMAC;
+			sess->auth.offset = CCP_SB_BYTES - SHA224_DIGEST_SIZE;
+			sess->auth.block_size = SHA224_BLOCK_SIZE;
+			sess->auth.key_length = auth_xform->key.length;
+			memset(sess->auth.key, 0, sess->auth.block_size);
+			rte_memcpy(sess->auth.key, auth_xform->key.data,
+				   auth_xform->key.length);
+		} else {
+			if (auth_xform->key.length > SHA224_BLOCK_SIZE)
+				return -1;
+			sess->auth.algo = CCP_AUTH_ALGO_SHA224_HMAC;
+			sess->auth.engine = CCP_ENGINE_SHA;
+			sess->auth.ut.sha_type = CCP_SHA_TYPE_224;
+			sess->auth.ctx_len = CCP_SB_BYTES;
+			sess->auth.offset = CCP_SB_BYTES - SHA224_DIGEST_SIZE;
+			sess->auth.block_size = SHA224_BLOCK_SIZE;
+			sess->auth.key_length = auth_xform->key.length;
+			memset(sess->auth.key, 0, sess->auth.block_size);
+			memset(sess->auth.pre_compute, 0,
+			       sess->auth.ctx_len << 1);
+			rte_memcpy(sess->auth.key, auth_xform->key.data,
+				   auth_xform->key.length);
+			if (generate_partial_hash(sess))
+				return -1;
+		}
 		break;
 	case RTE_CRYPTO_AUTH_SHA3_224:
 		sess->auth.algo = CCP_AUTH_ALGO_SHA3_224;
@@ -884,33 +886,34 @@ ccp_configure_session_auth(struct ccp_session *sess,
 		sess->auth.offset = CCP_SB_BYTES - SHA256_DIGEST_SIZE;
 		break;
 	case RTE_CRYPTO_AUTH_SHA256_HMAC:
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-		if (auth_xform->key.length > SHA256_BLOCK_SIZE)
-			return -1;
-		sess->auth.algo = CCP_AUTH_ALGO_SHA256_HMAC;
-		sess->auth.offset = CCP_SB_BYTES - SHA256_DIGEST_SIZE;
-		sess->auth.block_size = SHA256_BLOCK_SIZE;
-		sess->auth.key_length = auth_xform->key.length;
-		memset(sess->auth.key, 0, sess->auth.block_size);
-		rte_memcpy(sess->auth.key, auth_xform->key.data,
-			   auth_xform->key.length);
-#else
-		if (auth_xform->key.length > SHA256_BLOCK_SIZE)
-			return -1;
-		sess->auth.algo = CCP_AUTH_ALGO_SHA256_HMAC;
-		sess->auth.engine = CCP_ENGINE_SHA;
-		sess->auth.ut.sha_type = CCP_SHA_TYPE_256;
-		sess->auth.ctx_len = CCP_SB_BYTES;
-		sess->auth.offset = CCP_SB_BYTES - SHA256_DIGEST_SIZE;
-		sess->auth.block_size = SHA256_BLOCK_SIZE;
-		sess->auth.key_length = auth_xform->key.length;
-		memset(sess->auth.key, 0, sess->auth.block_size);
-		memset(sess->auth.pre_compute, 0, sess->auth.ctx_len << 1);
-		rte_memcpy(sess->auth.key, auth_xform->key.data,
-			   auth_xform->key.length);
-		if (generate_partial_hash(sess))
-			return -1;
-#endif
+		if (sess->auth_opt) {
+			if (auth_xform->key.length > SHA256_BLOCK_SIZE)
+				return -1;
+			sess->auth.algo = CCP_AUTH_ALGO_SHA256_HMAC;
+			sess->auth.offset = CCP_SB_BYTES - SHA256_DIGEST_SIZE;
+			sess->auth.block_size = SHA256_BLOCK_SIZE;
+			sess->auth.key_length = auth_xform->key.length;
+			memset(sess->auth.key, 0, sess->auth.block_size);
+			rte_memcpy(sess->auth.key, auth_xform->key.data,
+				   auth_xform->key.length);
+		} else {
+			if (auth_xform->key.length > SHA256_BLOCK_SIZE)
+				return -1;
+			sess->auth.algo = CCP_AUTH_ALGO_SHA256_HMAC;
+			sess->auth.engine = CCP_ENGINE_SHA;
+			sess->auth.ut.sha_type = CCP_SHA_TYPE_256;
+			sess->auth.ctx_len = CCP_SB_BYTES;
+			sess->auth.offset = CCP_SB_BYTES - SHA256_DIGEST_SIZE;
+			sess->auth.block_size = SHA256_BLOCK_SIZE;
+			sess->auth.key_length = auth_xform->key.length;
+			memset(sess->auth.key, 0, sess->auth.block_size);
+			memset(sess->auth.pre_compute, 0,
+			       sess->auth.ctx_len << 1);
+			rte_memcpy(sess->auth.key, auth_xform->key.data,
+				   auth_xform->key.length);
+			if (generate_partial_hash(sess))
+				return -1;
+		}
 		break;
 	case RTE_CRYPTO_AUTH_SHA3_256:
 		sess->auth.algo = CCP_AUTH_ALGO_SHA3_256;
@@ -945,33 +948,36 @@ ccp_configure_session_auth(struct ccp_session *sess,
 		sess->auth.offset = (CCP_SB_BYTES << 1) - SHA384_DIGEST_SIZE;
 		break;
 	case RTE_CRYPTO_AUTH_SHA384_HMAC:
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-		if (auth_xform->key.length > SHA384_BLOCK_SIZE)
-			return -1;
-		sess->auth.algo = CCP_AUTH_ALGO_SHA384_HMAC;
-		sess->auth.offset = (CCP_SB_BYTES << 1) - SHA384_DIGEST_SIZE;
-		sess->auth.block_size = SHA384_BLOCK_SIZE;
-		sess->auth.key_length = auth_xform->key.length;
-		memset(sess->auth.key, 0, sess->auth.block_size);
-		rte_memcpy(sess->auth.key, auth_xform->key.data,
-			   auth_xform->key.length);
-#else
-		if (auth_xform->key.length > SHA384_BLOCK_SIZE)
-			return -1;
-		sess->auth.algo = CCP_AUTH_ALGO_SHA384_HMAC;
-		sess->auth.engine = CCP_ENGINE_SHA;
-		sess->auth.ut.sha_type = CCP_SHA_TYPE_384;
-		sess->auth.ctx_len = CCP_SB_BYTES << 1;
-		sess->auth.offset = (CCP_SB_BYTES << 1) - SHA384_DIGEST_SIZE;
-		sess->auth.block_size = SHA384_BLOCK_SIZE;
-		sess->auth.key_length = auth_xform->key.length;
-		memset(sess->auth.key, 0, sess->auth.block_size);
-		memset(sess->auth.pre_compute, 0, sess->auth.ctx_len << 1);
-		rte_memcpy(sess->auth.key, auth_xform->key.data,
-			   auth_xform->key.length);
-		if (generate_partial_hash(sess))
-			return -1;
-#endif
+		if (sess->auth_opt) {
+			if (auth_xform->key.length > SHA384_BLOCK_SIZE)
+				return -1;
+			sess->auth.algo = CCP_AUTH_ALGO_SHA384_HMAC;
+			sess->auth.offset = ((CCP_SB_BYTES << 1) -
+					     SHA384_DIGEST_SIZE);
+			sess->auth.block_size = SHA384_BLOCK_SIZE;
+			sess->auth.key_length = auth_xform->key.length;
+			memset(sess->auth.key, 0, sess->auth.block_size);
+			rte_memcpy(sess->auth.key, auth_xform->key.data,
+				   auth_xform->key.length);
+		} else {
+			if (auth_xform->key.length > SHA384_BLOCK_SIZE)
+				return -1;
+			sess->auth.algo = CCP_AUTH_ALGO_SHA384_HMAC;
+			sess->auth.engine = CCP_ENGINE_SHA;
+			sess->auth.ut.sha_type = CCP_SHA_TYPE_384;
+			sess->auth.ctx_len = CCP_SB_BYTES << 1;
+			sess->auth.offset = ((CCP_SB_BYTES << 1) -
+					     SHA384_DIGEST_SIZE);
+			sess->auth.block_size = SHA384_BLOCK_SIZE;
+			sess->auth.key_length = auth_xform->key.length;
+			memset(sess->auth.key, 0, sess->auth.block_size);
+			memset(sess->auth.pre_compute, 0,
+			       sess->auth.ctx_len << 1);
+			rte_memcpy(sess->auth.key, auth_xform->key.data,
+				   auth_xform->key.length);
+			if (generate_partial_hash(sess))
+				return -1;
+		}
 		break;
 	case RTE_CRYPTO_AUTH_SHA3_384:
 		sess->auth.algo = CCP_AUTH_ALGO_SHA3_384;
@@ -1006,33 +1012,36 @@ ccp_configure_session_auth(struct ccp_session *sess,
 		sess->auth.offset = (CCP_SB_BYTES << 1) - SHA512_DIGEST_SIZE;
 		break;
 	case RTE_CRYPTO_AUTH_SHA512_HMAC:
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-		if (auth_xform->key.length > SHA512_BLOCK_SIZE)
-			return -1;
-		sess->auth.algo = CCP_AUTH_ALGO_SHA512_HMAC;
-		sess->auth.offset = (CCP_SB_BYTES << 1) - SHA512_DIGEST_SIZE;
-		sess->auth.block_size = SHA512_BLOCK_SIZE;
-		sess->auth.key_length = auth_xform->key.length;
-		memset(sess->auth.key, 0, sess->auth.block_size);
-		rte_memcpy(sess->auth.key, auth_xform->key.data,
-			   auth_xform->key.length);
-#else
-		if (auth_xform->key.length > SHA512_BLOCK_SIZE)
-			return -1;
-		sess->auth.algo = CCP_AUTH_ALGO_SHA512_HMAC;
-		sess->auth.engine = CCP_ENGINE_SHA;
-		sess->auth.ut.sha_type = CCP_SHA_TYPE_512;
-		sess->auth.ctx_len = CCP_SB_BYTES << 1;
-		sess->auth.offset = (CCP_SB_BYTES << 1) - SHA512_DIGEST_SIZE;
-		sess->auth.block_size = SHA512_BLOCK_SIZE;
-		sess->auth.key_length = auth_xform->key.length;
-		memset(sess->auth.key, 0, sess->auth.block_size);
-		memset(sess->auth.pre_compute, 0, sess->auth.ctx_len << 1);
-		rte_memcpy(sess->auth.key, auth_xform->key.data,
-			   auth_xform->key.length);
-		if (generate_partial_hash(sess))
-			return -1;
-#endif
+		if (sess->auth_opt) {
+			if (auth_xform->key.length > SHA512_BLOCK_SIZE)
+				return -1;
+			sess->auth.algo = CCP_AUTH_ALGO_SHA512_HMAC;
+			sess->auth.offset = ((CCP_SB_BYTES << 1) -
+					     SHA512_DIGEST_SIZE);
+			sess->auth.block_size = SHA512_BLOCK_SIZE;
+			sess->auth.key_length = auth_xform->key.length;
+			memset(sess->auth.key, 0, sess->auth.block_size);
+			rte_memcpy(sess->auth.key, auth_xform->key.data,
+				   auth_xform->key.length);
+		} else {
+			if (auth_xform->key.length > SHA512_BLOCK_SIZE)
+				return -1;
+			sess->auth.algo = CCP_AUTH_ALGO_SHA512_HMAC;
+			sess->auth.engine = CCP_ENGINE_SHA;
+			sess->auth.ut.sha_type = CCP_SHA_TYPE_512;
+			sess->auth.ctx_len = CCP_SB_BYTES << 1;
+			sess->auth.offset = ((CCP_SB_BYTES << 1) -
+					     SHA512_DIGEST_SIZE);
+			sess->auth.block_size = SHA512_BLOCK_SIZE;
+			sess->auth.key_length = auth_xform->key.length;
+			memset(sess->auth.key, 0, sess->auth.block_size);
+			memset(sess->auth.pre_compute, 0,
+			       sess->auth.ctx_len << 1);
+			rte_memcpy(sess->auth.key, auth_xform->key.data,
+				   auth_xform->key.length);
+			if (generate_partial_hash(sess))
+				return -1;
+		}
 		break;
 	case RTE_CRYPTO_AUTH_SHA3_512:
 		sess->auth.algo = CCP_AUTH_ALGO_SHA3_512;
@@ -1157,13 +1166,15 @@ ccp_configure_session_aead(struct ccp_session *sess,
 
 int
 ccp_set_session_parameters(struct ccp_session *sess,
-			   const struct rte_crypto_sym_xform *xform)
+			   const struct rte_crypto_sym_xform *xform,
+			   struct ccp_private *internals)
 {
 	const struct rte_crypto_sym_xform *cipher_xform = NULL;
 	const struct rte_crypto_sym_xform *auth_xform = NULL;
 	const struct rte_crypto_sym_xform *aead_xform = NULL;
 	int ret = 0;
 
+	sess->auth_opt = internals->auth_opt;
 	sess->cmd_id = ccp_get_cmd_id(xform);
 
 	switch (sess->cmd_id) {
@@ -1259,22 +1270,16 @@ ccp_auth_slot(struct ccp_session *session)
 		count = 3;
 		/**< op + lsb passthrough cpy to/from*/
 		break;
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
 	case CCP_AUTH_ALGO_MD5_HMAC:
 		break;
-#endif
 	case CCP_AUTH_ALGO_SHA1_HMAC:
 	case CCP_AUTH_ALGO_SHA224_HMAC:
 	case CCP_AUTH_ALGO_SHA256_HMAC:
-#ifndef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-		count = 6;
-#endif
+		if (session->auth_opt == 0)
+			count = 6;
 		break;
 	case CCP_AUTH_ALGO_SHA384_HMAC:
 	case CCP_AUTH_ALGO_SHA512_HMAC:
-#ifndef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-		count = 7;
-#endif
 		/**
 		 * 1. Load PHash1 = H(k ^ ipad); to LSB
 		 * 2. generate IHash = H(hash on meassage with PHash1
@@ -1285,6 +1290,8 @@ ccp_auth_slot(struct ccp_session *session)
 		 * as init value);
 		 * 6. Retrieve HMAC output from LSB to host memory
 		 */
+		if (session->auth_opt == 0)
+			count = 7;
 		break;
 	case CCP_AUTH_ALGO_SHA3_224:
 	case CCP_AUTH_ALGO_SHA3_256:
@@ -1381,7 +1388,6 @@ ccp_compute_slot_count(struct ccp_session *session)
 	return count;
 }
 
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
 static uint8_t
 algo_select(int sessalgo,
 	    const EVP_MD **algo)
@@ -1495,7 +1501,6 @@ static int cpu_crypto_auth(struct ccp_qp *qp,
 	EVP_PKEY_free(pkey);
 	return 0;
 }
-#endif
 
 static void
 ccp_perform_passthru(struct ccp_passthru *pst,
@@ -2592,26 +2597,24 @@ ccp_crypto_auth(struct rte_crypto_op *op,
 		result = ccp_perform_sha(op, cmd_q);
 		b_info->desccnt += 3;
 		break;
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
 	case CCP_AUTH_ALGO_MD5_HMAC:
+		if (session->auth_opt == 0)
+			result = -1;
 		break;
-#endif
 	case CCP_AUTH_ALGO_SHA1_HMAC:
 	case CCP_AUTH_ALGO_SHA224_HMAC:
 	case CCP_AUTH_ALGO_SHA256_HMAC:
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-		break;
-#endif
-		result = ccp_perform_hmac(op, cmd_q);
-		b_info->desccnt += 6;
+		if (session->auth_opt == 0) {
+			result = ccp_perform_hmac(op, cmd_q);
+			b_info->desccnt += 6;
+		}
 		break;
 	case CCP_AUTH_ALGO_SHA384_HMAC:
 	case CCP_AUTH_ALGO_SHA512_HMAC:
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-		break;
-#endif
-		result = ccp_perform_hmac(op, cmd_q);
-		b_info->desccnt += 7;
+		if (session->auth_opt == 0) {
+			result = ccp_perform_hmac(op, cmd_q);
+			b_info->desccnt += 7;
+		}
 		break;
 	case CCP_AUTH_ALGO_SHA3_224:
 	case CCP_AUTH_ALGO_SHA3_256:
@@ -2682,22 +2685,20 @@ process_ops_to_enqueue(struct ccp_qp *qp,
 	int i, result = 0;
 	struct ccp_batch_info *b_info;
 	struct ccp_session *session;
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
 	EVP_MD_CTX *auth_ctx = NULL;
-#endif
 
 	if (rte_mempool_get(qp->batch_mp, (void **)&b_info)) {
 		CCP_LOG_ERR("batch info allocation failed");
 		return 0;
 	}
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
+
 	auth_ctx = EVP_MD_CTX_create();
 	if (unlikely(!auth_ctx)) {
 		CCP_LOG_ERR("Unable to create auth ctx");
 		return 0;
 	}
 	b_info->auth_ctr = 0;
-#endif
+
 	/* populate batch info necessary for dequeue */
 	b_info->op_idx = 0;
 	b_info->lsb_buf_idx = 0;
@@ -2718,12 +2719,12 @@ process_ops_to_enqueue(struct ccp_qp *qp,
 			result = ccp_crypto_cipher(op[i], cmd_q, b_info);
 			break;
 		case CCP_CMD_AUTH:
-			result = ccp_crypto_auth(op[i], cmd_q, b_info);
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-			b_info->auth_ctr++;
-			result = cpu_crypto_auth(qp, op[i],
-						 session, auth_ctx);
-#endif
+			if (session->auth_opt) {
+				b_info->auth_ctr++;
+				result = cpu_crypto_auth(qp, op[i],
+							 session, auth_ctx);
+			} else
+				result = ccp_crypto_auth(op[i], cmd_q, b_info);
 			break;
 		case CCP_CMD_CIPHER_HASH:
 			result = ccp_crypto_cipher(op[i], cmd_q, b_info);
@@ -2732,13 +2733,15 @@ process_ops_to_enqueue(struct ccp_qp *qp,
 			result = ccp_crypto_auth(op[i], cmd_q, b_info);
 			break;
 		case CCP_CMD_HASH_CIPHER:
-			result = ccp_crypto_auth(op[i], cmd_q, b_info);
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-			result = cpu_crypto_auth(qp, op[i],
-						 session, auth_ctx);
-			if (op[i]->status != RTE_CRYPTO_OP_STATUS_SUCCESS)
-				continue;
-#endif
+			if (session->auth_opt) {
+				result = cpu_crypto_auth(qp, op[i],
+							 session, auth_ctx);
+				if (op[i]->status !=
+				    RTE_CRYPTO_OP_STATUS_SUCCESS)
+					continue;
+			} else
+				result = ccp_crypto_auth(op[i], cmd_q, b_info);
+
 			if (result)
 				break;
 			result = ccp_crypto_cipher(op[i], cmd_q, b_info);
@@ -2772,9 +2775,7 @@ process_ops_to_enqueue(struct ccp_qp *qp,
 
 	rte_ring_enqueue(qp->processed_pkts, (void *)b_info);
 
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
 	EVP_MD_CTX_destroy(auth_ctx);
-#endif
 	return i;
 }
 
@@ -2843,11 +2844,7 @@ static inline void ccp_auth_dq_prepare(struct rte_crypto_op *op)
 }
 
 static int
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
 ccp_prepare_ops(struct ccp_qp *qp,
-#else
-ccp_prepare_ops(struct ccp_qp *qp __rte_unused,
-#endif
 		struct rte_crypto_op **op_d,
 		struct ccp_batch_info *b_info,
 		uint16_t nb_ops)
@@ -2855,7 +2852,6 @@ ccp_prepare_ops(struct ccp_qp *qp __rte_unused,
 	int i, min_ops;
 	struct ccp_session *session;
 
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
 	EVP_MD_CTX *auth_ctx = NULL;
 
 	auth_ctx = EVP_MD_CTX_create();
@@ -2863,7 +2859,6 @@ ccp_prepare_ops(struct ccp_qp *qp __rte_unused,
 		CCP_LOG_ERR("Unable to create auth ctx");
 		return 0;
 	}
-#endif
 	min_ops = RTE_MIN(nb_ops, b_info->opcnt);
 
 	for (i = 0; i < min_ops; i++) {
@@ -2876,24 +2871,21 @@ ccp_prepare_ops(struct ccp_qp *qp __rte_unused,
 			op_d[i]->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
 			break;
 		case CCP_CMD_AUTH:
-#ifndef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-			ccp_auth_dq_prepare(op_d[i]);
-#endif
+			if (session->auth_opt == 0)
+				ccp_auth_dq_prepare(op_d[i]);
 			break;
 		case CCP_CMD_CIPHER_HASH:
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-			cpu_crypto_auth(qp, op_d[i],
-					session, auth_ctx);
-#else
-			ccp_auth_dq_prepare(op_d[i]);
-#endif
+			if (session->auth_opt)
+				cpu_crypto_auth(qp, op_d[i],
+						session, auth_ctx);
+			else
+				ccp_auth_dq_prepare(op_d[i]);
 			break;
 		case CCP_CMD_HASH_CIPHER:
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-			op_d[i]->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
-#else
-			ccp_auth_dq_prepare(op_d[i]);
-#endif
+			if (session->auth_opt)
+				op_d[i]->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
+			else
+				ccp_auth_dq_prepare(op_d[i]);
 			break;
 		case CCP_CMD_COMBINED:
 			ccp_auth_dq_prepare(op_d[i]);
@@ -2903,9 +2895,7 @@ ccp_prepare_ops(struct ccp_qp *qp __rte_unused,
 		}
 	}
 
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
 	EVP_MD_CTX_destroy(auth_ctx);
-#endif
 	b_info->opcnt -= min_ops;
 	return min_ops;
 }
@@ -2925,10 +2915,9 @@ process_ops_to_dequeue(struct ccp_qp *qp,
 	} else if (rte_ring_dequeue(qp->processed_pkts,
 				    (void **)&b_info))
 		return 0;
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
+
 	if (b_info->auth_ctr == b_info->opcnt)
 		goto success;
-#endif
 	cur_head_offset = CCP_READ_REG(b_info->cmd_q->reg_base,
 				       CMD_Q_HEAD_LO_BASE);
 
diff --git a/drivers/crypto/ccp/ccp_crypto.h b/drivers/crypto/ccp/ccp_crypto.h
index dd89ad9..882b398 100644
--- a/drivers/crypto/ccp/ccp_crypto.h
+++ b/drivers/crypto/ccp/ccp_crypto.h
@@ -42,10 +42,9 @@
 #define HMAC_IPAD_VALUE 0x36
 #define HMAC_OPAD_VALUE 0x5c
 
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
+/* MD5 */
 #define MD5_DIGEST_SIZE         16
 #define MD5_BLOCK_SIZE          64
-#endif
 
 /* SHA */
 #define SHA_COMMON_DIGEST_SIZE	32
@@ -235,9 +234,7 @@ enum ccp_hash_algo {
 	CCP_AUTH_ALGO_SHA3_512_HMAC,
 	CCP_AUTH_ALGO_AES_CMAC,
 	CCP_AUTH_ALGO_AES_GCM,
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
 	CCP_AUTH_ALGO_MD5_HMAC,
-#endif
 };
 
 /**
@@ -250,6 +247,7 @@ enum ccp_hash_op {
 
 /* CCP crypto private session structure */
 struct ccp_session {
+	bool auth_opt;
 	enum ccp_cmd_order cmd_id;
 	/**< chain order mode */
 	struct {
@@ -321,6 +319,7 @@ struct ccp_session {
 extern uint8_t ccp_cryptodev_driver_id;
 
 struct ccp_qp;
+struct ccp_private;
 
 /**
  * Set and validate CCP crypto session parameters
@@ -330,7 +329,8 @@ struct ccp_qp;
  * @return 0 on success otherwise -1
  */
 int ccp_set_session_parameters(struct ccp_session *sess,
-			       const struct rte_crypto_sym_xform *xform);
+			       const struct rte_crypto_sym_xform *xform,
+			       struct ccp_private *internals);
 
 /**
  * Find count of slots
diff --git a/drivers/crypto/ccp/ccp_pmd_ops.c b/drivers/crypto/ccp/ccp_pmd_ops.c
index 3d0d875..2c7496b 100644
--- a/drivers/crypto/ccp/ccp_pmd_ops.c
+++ b/drivers/crypto/ccp/ccp_pmd_ops.c
@@ -13,7 +13,6 @@
 #include "ccp_crypto.h"
 
 static const struct rte_cryptodev_capabilities ccp_pmd_capabilities[] = {
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
 	{	/* MD5 HMAC */
 		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
 		{.sym = {
@@ -35,7 +34,6 @@ static const struct rte_cryptodev_capabilities ccp_pmd_capabilities[] = {
 			}, }
 		}, }
 	},
-#endif
 	{	/* SHA1 */
 		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
 		{.sym = {
@@ -770,6 +768,7 @@ ccp_pmd_session_configure(struct rte_cryptodev *dev,
 {
 	int ret;
 	void *sess_private_data;
+	struct ccp_private *internals;
 
 	if (unlikely(sess == NULL || xform == NULL)) {
 		CCP_LOG_ERR("Invalid session struct or xform");
@@ -780,7 +779,8 @@ ccp_pmd_session_configure(struct rte_cryptodev *dev,
 		CCP_LOG_ERR("Couldn't get object from session mempool");
 		return -ENOMEM;
 	}
-	ret = ccp_set_session_parameters(sess_private_data, xform);
+	internals = (struct ccp_private *)dev->data->dev_private;
+	ret = ccp_set_session_parameters(sess_private_data, xform, internals);
 	if (ret != 0) {
 		CCP_LOG_ERR("failed configure session parameters");
 
diff --git a/drivers/crypto/ccp/ccp_pmd_private.h b/drivers/crypto/ccp/ccp_pmd_private.h
index 560bed9..71677ee 100644
--- a/drivers/crypto/ccp/ccp_pmd_private.h
+++ b/drivers/crypto/ccp/ccp_pmd_private.h
@@ -42,6 +42,8 @@ struct ccp_private {
 	unsigned int max_nb_qpairs;	/**< Max number of queue pairs */
 	unsigned int max_nb_sessions;	/**< Max number of sessions */
 	uint8_t crypto_num_dev;		/**< Number of working crypto devices */
+	bool auth_opt;			/**< Authentication offload option */
+	int die_num;			/**< Combine CCP devices of this die */
 	struct ccp_device *last_dev;	/**< Last working crypto device */
 };
 
@@ -62,10 +64,8 @@ struct ccp_batch_info {
 	phys_addr_t lsb_buf_phys;
 	/**< LSB intermediate buf for passthru */
 	int lsb_buf_idx;
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
 	uint16_t auth_ctr;
-	/**< auth only ops batch */
-#endif
+	/**< auth only ops batch for CPU based auth */
 } __rte_cache_aligned;
 
 /**< CCP crypto queue pair */
diff --git a/drivers/crypto/ccp/rte_ccp_pmd.c b/drivers/crypto/ccp/rte_ccp_pmd.c
index d3553db..7d3870f 100644
--- a/drivers/crypto/ccp/rte_ccp_pmd.c
+++ b/drivers/crypto/ccp/rte_ccp_pmd.c
@@ -22,6 +22,173 @@
 static unsigned int ccp_pmd_init_done;
 uint8_t ccp_cryptodev_driver_id;
 
+struct ccp_pmd_init_params {
+	struct rte_cryptodev_pmd_init_params def_p;
+	bool auth_opt;
+	int die_num;
+};
+
+#define CCP_CRYPTODEV_PARAM_NAME		("name")
+#define CCP_CRYPTODEV_PARAM_SOCKET_ID		("socket_id")
+#define CCP_CRYPTODEV_PARAM_MAX_NB_QP		("max_nb_queue_pairs")
+#define CCP_CRYPTODEV_PARAM_MAX_NB_SESS		("max_nb_sessions")
+#define CCP_CRYPTODEV_PARAM_AUTH_OPT		("ccp_auth_opt")
+#define CCP_CRYPTODEV_PARAM_DIE_NUM		("die_num")
+
+const char *ccp_pmd_valid_params[] = {
+	CCP_CRYPTODEV_PARAM_NAME,
+	CCP_CRYPTODEV_PARAM_SOCKET_ID,
+	CCP_CRYPTODEV_PARAM_MAX_NB_QP,
+	CCP_CRYPTODEV_PARAM_MAX_NB_SESS,
+	CCP_CRYPTODEV_PARAM_AUTH_OPT,
+	CCP_CRYPTODEV_PARAM_DIE_NUM,
+};
+
+/** ccp pmd auth option */
+enum ccp_pmd_auth_opt {
+	CCP_PMD_AUTH_OPT_CCP = 0,
+	CCP_PMD_AUTH_OPT_CPU,
+};
+
+/** parse integer from integer argument */
+static int
+parse_integer_arg(const char *key __rte_unused,
+		  const char *value, void *extra_args)
+{
+	int *i = (int *) extra_args;
+
+	*i = atoi(value);
+	if (*i < 0) {
+		CCP_LOG_ERR("Argument has to be positive.\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/** parse name argument */
+static int
+parse_name_arg(const char *key __rte_unused,
+	       const char *value, void *extra_args)
+{
+	struct rte_cryptodev_pmd_init_params *params = extra_args;
+
+	if (strlen(value) >= RTE_CRYPTODEV_NAME_MAX_LEN - 1) {
+		CCP_LOG_ERR("Invalid name %s, should be less than "
+			    "%u bytes.\n", value,
+			    RTE_CRYPTODEV_NAME_MAX_LEN - 1);
+		return -EINVAL;
+	}
+
+	strncpy(params->name, value, RTE_CRYPTODEV_NAME_MAX_LEN);
+
+	return 0;
+}
+
+/** parse authentication operation option */
+static int
+parse_auth_opt_arg(const char *key __rte_unused,
+		   const char *value, void *extra_args)
+{
+	struct ccp_pmd_init_params *params = extra_args;
+	int i;
+
+	i = atoi(value);
+	if (i < CCP_PMD_AUTH_OPT_CCP || i > CCP_PMD_AUTH_OPT_CPU) {
+		CCP_LOG_ERR("Invalid ccp pmd auth option. "
+			    "0->auth on CCP(default), "
+			    "1->auth on CPU\n");
+		return -EINVAL;
+	}
+	params->auth_opt = i;
+	return 0;
+}
+
+/* Maximum 4-die platform (0-3) supported */
+#define CCP_PLATFORM_MAX_DIE_NUM 3
+
+/** parse die number argument */
+static int
+parse_die_num_arg(const char *key __rte_unused,
+		  const char *value, void *extra_args)
+{
+	struct ccp_pmd_init_params *params = extra_args;
+	int *i = (int *)&params->die_num;
+
+	*i = atoi(value);
+	if (*i < 0 || *i > CCP_PLATFORM_MAX_DIE_NUM) {
+		CCP_LOG_ERR("Invalid platform die number. "
+			    "Must be in the range 0-%d\n",
+			    CCP_PLATFORM_MAX_DIE_NUM);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int
+ccp_pmd_parse_input_args(struct ccp_pmd_init_params *params,
+			 const char *input_args)
+{
+	struct rte_kvargs *kvlist = NULL;
+	int ret = 0;
+
+	if (params == NULL)
+		return -EINVAL;
+
+	if (input_args) {
+		kvlist = rte_kvargs_parse(input_args,
+					  ccp_pmd_valid_params);
+		if (kvlist == NULL)
+			return -1;
+
+		ret = rte_kvargs_process(kvlist,
+					 CCP_CRYPTODEV_PARAM_MAX_NB_QP,
+					 &parse_integer_arg,
+					 &params->def_p.max_nb_queue_pairs);
+		if (ret < 0)
+			goto free_kvlist;
+
+		ret = rte_kvargs_process(kvlist,
+					 CCP_CRYPTODEV_PARAM_MAX_NB_SESS,
+					 &parse_integer_arg,
+					 &params->def_p.max_nb_sessions);
+		if (ret < 0)
+			goto free_kvlist;
+
+		ret = rte_kvargs_process(kvlist,
+					 CCP_CRYPTODEV_PARAM_SOCKET_ID,
+					 &parse_integer_arg,
+					 &params->def_p.socket_id);
+		if (ret < 0)
+			goto free_kvlist;
+
+		ret = rte_kvargs_process(kvlist,
+					 CCP_CRYPTODEV_PARAM_NAME,
+					 &parse_name_arg,
+					 &params->def_p);
+		if (ret < 0)
+			goto free_kvlist;
+
+		ret = rte_kvargs_process(kvlist,
+					 CCP_CRYPTODEV_PARAM_AUTH_OPT,
+					 &parse_auth_opt_arg,
+					 params);
+		if (ret < 0)
+			goto free_kvlist;
+
+		ret = rte_kvargs_process(kvlist,
+					 CCP_CRYPTODEV_PARAM_DIE_NUM,
+					 &parse_die_num_arg,
+					 params);
+		if (ret < 0)
+			goto free_kvlist;
+	}
+
+free_kvlist:
+	rte_kvargs_free(kvlist);
+	return ret;
+}
+
 static struct ccp_session *
 get_ccp_session(struct ccp_qp *qp, struct rte_crypto_op *op)
 {
@@ -38,6 +205,7 @@ get_ccp_session(struct ccp_qp *qp, struct rte_crypto_op *op)
 	} else if (op->sess_type == RTE_CRYPTO_OP_SESSIONLESS) {
 		void *_sess;
 		void *_sess_private_data = NULL;
+		struct ccp_private *internals;
 
 		if (rte_mempool_get(qp->sess_mp, &_sess))
 			return NULL;
@@ -46,8 +214,9 @@ get_ccp_session(struct ccp_qp *qp, struct rte_crypto_op *op)
 
 		sess = (struct ccp_session *)_sess_private_data;
 
-		if (unlikely(ccp_set_session_parameters(sess,
-							op->sym->xform) != 0)) {
+		internals = (struct ccp_private *)qp->dev->data->dev_private;
+		if (unlikely(ccp_set_session_parameters(sess, op->sym->xform,
+							internals) != 0)) {
 			rte_mempool_put(qp->sess_mp, _sess);
 			rte_mempool_put(qp->sess_mp, _sess_private_data);
 			sess = NULL;
@@ -154,19 +323,20 @@ cryptodev_ccp_remove(struct rte_vdev_device *dev)
 static int
 cryptodev_ccp_create(const char *name,
 		     struct rte_vdev_device *vdev,
-		     struct rte_cryptodev_pmd_init_params *init_params)
+		     struct ccp_pmd_init_params *init_params)
 {
 	struct rte_cryptodev *dev;
 	struct ccp_private *internals;
 	uint8_t cryptodev_cnt = 0;
 
-	if (init_params->name[0] == '\0')
-		snprintf(init_params->name, sizeof(init_params->name),
-				"%s", name);
+	if (init_params->def_p.name[0] == '\0')
+		snprintf(init_params->def_p.name,
+			 sizeof(init_params->def_p.name),
+			 "%s", name);
 
-	dev = rte_cryptodev_pmd_create(init_params->name,
+	dev = rte_cryptodev_pmd_create(init_params->def_p.name,
 				       &vdev->device,
-				       init_params);
+				       &init_params->def_p);
 	if (dev == NULL) {
 		CCP_LOG_ERR("failed to create cryptodev vdev");
 		goto init_error;
@@ -193,15 +363,17 @@ cryptodev_ccp_create(const char *name,
 
 	internals = dev->data->dev_private;
 
-	internals->max_nb_qpairs = init_params->max_nb_queue_pairs;
-	internals->max_nb_sessions = init_params->max_nb_sessions;
+	internals->max_nb_qpairs = init_params->def_p.max_nb_queue_pairs;
+	internals->max_nb_sessions = init_params->def_p.max_nb_sessions;
+	internals->auth_opt = init_params->auth_opt;
+	internals->die_num = init_params->die_num;
 	internals->crypto_num_dev = cryptodev_cnt;
 
 	return 0;
 
 init_error:
 	CCP_LOG_ERR("driver %s: %s() failed",
-		    init_params->name, __func__);
+		    init_params->def_p.name, __func__);
 	cryptodev_ccp_remove(vdev);
 
 	return -EFAULT;
@@ -213,12 +385,17 @@ cryptodev_ccp_probe(struct rte_vdev_device *vdev)
 {
 	int rc = 0;
 	const char *name;
-	struct rte_cryptodev_pmd_init_params init_params = {
-		"",
-		sizeof(struct ccp_private),
-		rte_socket_id(),
-		CCP_PMD_MAX_QUEUE_PAIRS,
-		RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_SESSIONS
+	char die_num[20] = {0};
+	struct ccp_pmd_init_params init_params = {
+		.def_p = {
+			"",
+			sizeof(struct ccp_private),
+			rte_socket_id(),
+			CCP_PMD_MAX_QUEUE_PAIRS,
+			RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_SESSIONS
+		},
+		.auth_opt = CCP_PMD_AUTH_OPT_CCP,
+		.die_num = -1, /* by default use all CCP underneath */
 	};
 	const char *input_args;
 
@@ -231,15 +408,20 @@ cryptodev_ccp_probe(struct rte_vdev_device *vdev)
 		return -EINVAL;
 
 	input_args = rte_vdev_device_args(vdev);
-	rte_cryptodev_pmd_parse_input_args(&init_params, input_args);
-	init_params.max_nb_queue_pairs = CCP_PMD_MAX_QUEUE_PAIRS;
+	ccp_pmd_parse_input_args(&init_params, input_args);
+	init_params.def_p.max_nb_queue_pairs = CCP_PMD_MAX_QUEUE_PAIRS;
 
 	RTE_LOG(INFO, PMD, "Initialising %s on NUMA node %d\n", name,
-			init_params.socket_id);
+		init_params.def_p.socket_id);
 	RTE_LOG(INFO, PMD, "Max number of queue pairs = %d\n",
-			init_params.max_nb_queue_pairs);
+		init_params.def_p.max_nb_queue_pairs);
 	RTE_LOG(INFO, PMD, "Max number of sessions = %d\n",
-			init_params.max_nb_sessions);
+		init_params.def_p.max_nb_sessions);
+	RTE_LOG(INFO, PMD, "Authentication offload to %s\n",
+		((init_params.auth_opt == 0) ? "CCP" : "CPU"));
+	snprintf(die_num, 20, "die_num-%d", init_params.die_num);
+	RTE_LOG(INFO, PMD, "Combining %s CCP devices\n",
+		((init_params.die_num == -1) ? "all" : die_num));
 
 	rc = cryptodev_ccp_create(name, vdev, &init_params);
 	if (rc)
-- 
2.7.4

Re: [dpdk-dev] [PATCH 2/2] crypto/ccp: change to command line option from compile time

[De Lara Guarch, Pablo]

> -----Original Message-----
> From: Ravi Kumar [mailto:Ravi1.kumar@amd.com]
> Sent: Thursday, May 3, 2018 6:57 AM
> To: dev@dpdk.org
> Cc: De Lara Guarch, Pablo <pablo.de.lara.guarch@intel.com>;
> thomas@monjalon.net; hemant.agrawal@nxp.com
> Subject: [PATCH 2/2] crypto/ccp: change to command line option from compile
> time
> 
> CCP PMD supports authentication offload to either of CCP or CPU. The earlier
> version of patch provided this option as compile time. This patch changes this
> option from compile time to run time. User can pass "ccp_auth_opt=1" as an
> additional argument to vdev parameter to enable authentication operations on
> CPU.
> 
> Signed-off-by: Ravi Kumar <Ravi1.kumar@amd.com>

...

> +++ b/drivers/crypto/ccp/ccp_pmd_ops.c
> @@ -13,7 +13,6 @@
>  #include "ccp_crypto.h"
> 
>  static const struct rte_cryptodev_capabilities ccp_pmd_capabilities[] = { -#ifdef
> RTE_LIBRTE_PMD_CCP_CPU_AUTH
>  	{	/* MD5 HMAC */
>  		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
>  		{.sym = {
> @@ -35,7 +34,6 @@ static const struct rte_cryptodev_capabilities
> ccp_pmd_capabilities[] = {
>  			}, }
>  		}, }
>  	},
> -#endif

MD5 won't be supported unless the auth_opt is enabled.
I would suggest doing something similar to what QAT does.
You can have an array with the base capabilities and another one
for the extended ones (with MD5).
When "auth_opt" is enabled, you can have the combination of both.
When it is not, then you can just have the base capabilities.

>  	{	/* SHA1 */
>  		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
>  		{.sym = {

...

>  	RTE_LOG(INFO, PMD, "Initialising %s on NUMA node %d\n", name,
> -			init_params.socket_id);
> +		init_params.def_p.socket_id);
>  	RTE_LOG(INFO, PMD, "Max number of queue pairs = %d\n",
> -			init_params.max_nb_queue_pairs);
> +		init_params.def_p.max_nb_queue_pairs);
>  	RTE_LOG(INFO, PMD, "Max number of sessions = %d\n",
> -			init_params.max_nb_sessions);
> +		init_params.def_p.max_nb_sessions);
> +	RTE_LOG(INFO, PMD, "Authentication offload to %s\n",
> +		((init_params.auth_opt == 0) ? "CCP" : "CPU"));
> +	snprintf(die_num, 20, "die_num-%d", init_params.die_num);
> +	RTE_LOG(INFO, PMD, "Combining %s CCP devices\n",
> +		((init_params.die_num == -1) ? "all" : die_num));
> 
>  	rc = cryptodev_ccp_create(name, vdev, &init_params);
>  	if (rc)
> --
> 2.7.4

You are adding new parameters, so you should extend the parameters registration at the bottom of this file:

RTE_PMD_REGISTER_PARAM_STRING(CRYPTODEV_NAME_CCP_PMD,
        "max_nb_queue_pairs=<int> max_nb_sessions=<int> socket_id=<int>");

Re: [dpdk-dev] [PATCH 1/2] crypto/ccp: enable CCP crypto poll mode driver by default

[De Lara Guarch, Pablo]

Hi Ravi,

> -----Original Message-----
> From: Ravi Kumar [mailto:Ravi1.kumar@amd.com]
> Sent: Thursday, May 3, 2018 6:57 AM
> To: dev@dpdk.org
> Cc: De Lara Guarch, Pablo <pablo.de.lara.guarch@intel.com>;
> thomas@monjalon.net; hemant.agrawal@nxp.com
> Subject: [PATCH 1/2] crypto/ccp: enable CCP crypto poll mode driver by default
> 
> Signed-off-by: Ravi Kumar <Ravi1.kumar@amd.com>
> ---
>  config/common_base | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/config/common_base b/config/common_base index
> 03a8688..802035b 100644
> --- a/config/common_base
> +++ b/config/common_base
> @@ -555,7 +555,7 @@ CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
>  #
>  # Compile PMD for AMD CCP crypto device  # -
> CONFIG_RTE_LIBRTE_PMD_CCP=n
> +CONFIG_RTE_LIBRTE_PMD_CCP=y
>  CONFIG_RTE_LIBRTE_PMD_CCP_CPU_AUTH=n
> 
>  #
> --
> 2.7.4

I think this cannot be enabled by default, since it has an external dependency on OpenSSL.

Pablo

Re: [dpdk-dev] [PATCH 1/2] crypto/ccp: enable CCP crypto poll mode driver by default

[Kumar, Ravi1]

>Hi Ravi,
>
>> -----Original Message-----
>> From: Ravi Kumar [mailto:Ravi1.kumar@amd.com]
>> Sent: Thursday, May 3, 2018 6:57 AM
>> To: dev@dpdk.org
>> Cc: De Lara Guarch, Pablo <pablo.de.lara.guarch@intel.com>; 
>> thomas@monjalon.net; hemant.agrawal@nxp.com
>> Subject: [PATCH 1/2] crypto/ccp: enable CCP crypto poll mode driver by 
>> default
>> 
>> Signed-off-by: Ravi Kumar <Ravi1.kumar@amd.com>
>> ---
>>  config/common_base | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>> 
>> diff --git a/config/common_base b/config/common_base index 
>> 03a8688..802035b 100644
>> --- a/config/common_base
>> +++ b/config/common_base
>> @@ -555,7 +555,7 @@ CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
>>  #
>>  # Compile PMD for AMD CCP crypto device  # - 
>> CONFIG_RTE_LIBRTE_PMD_CCP=n
>> +CONFIG_RTE_LIBRTE_PMD_CCP=y
>>  CONFIG_RTE_LIBRTE_PMD_CCP_CPU_AUTH=n
>> 
>>  #
>> --
>> 2.7.4
>
>I think this cannot be enabled by default, since it has an external dependency on OpenSSL.

Hi Pablo,

We were asked to enable the PMD by default in one of the previous emails. Unfortunately, we can't remove the dependency on OpenSSL. Kindly suggest the option in this case. We could leave this patch-set and have the code as-is, I mean the older compile-time option. If not, then this is our only option. 

Regards,
Ravi

>
>Pablo
>

Re: [dpdk-dev] [PATCH 1/2] crypto/ccp: enable CCP crypto poll mode driver by default

[Thomas Monjalon]

09/05/2018 07:53, Kumar, Ravi1:
> >
> >I think this cannot be enabled by default, since it has an external dependency on OpenSSL.
> 
> Hi Pablo,
> 
> We were asked to enable the PMD by default in one of the previous emails. Unfortunately, we can't remove the dependency on OpenSSL. Kindly suggest the option in this case. We could leave this patch-set and have the code as-is, I mean the older compile-time option. If not, then this is our only option. 

If you have a dependency, you cannot enable by default.

Re: [dpdk-dev] [PATCH 1/2] crypto/ccp: enable CCP crypto poll mode driver by default

[Kumar, Ravi1]

>09/05/2018 07:53, Kumar, Ravi1:
>> >
>> >I think this cannot be enabled by default, since it has an external dependency on OpenSSL.
>> 
>> Hi Pablo,
>> 
>> We were asked to enable the PMD by default in one of the previous emails. Unfortunately, we can't remove the dependency on OpenSSL. Kindly suggest the option in this case. We could leave this patch-set and have the code as-is, I mean the older compile-time option. If not, then this is our only option. 
>
>If you have a dependency, you cannot enable by default.
>
Hi Thomas,

Ok. Could we still submit the 2nd patch for changing compile time to run time option and remove the first one?

Regards,
Ravi

Re: [dpdk-dev] [PATCH 1/2] crypto/ccp: enable CCP crypto poll mode driver by default

[Thomas Monjalon]

09/05/2018 10:11, Kumar, Ravi1:
> >09/05/2018 07:53, Kumar, Ravi1:
> >> >
> >> >I think this cannot be enabled by default, since it has an external dependency on OpenSSL.
> >> 
> >> Hi Pablo,
> >> 
> >> We were asked to enable the PMD by default in one of the previous emails. Unfortunately, we can't remove the dependency on OpenSSL. Kindly suggest the option in this case. We could leave this patch-set and have the code as-is, I mean the older compile-time option. If not, then this is our only option. 
> >
> >If you have a dependency, you cannot enable by default.
> >
> Hi Thomas,
> 
> Ok. Could we still submit the 2nd patch for changing compile time to run time option and remove the first one?

Yes, sure

Re: [dpdk-dev] [PATCH 1/2] crypto/ccp: enable CCP crypto poll mode driver by default

[De Lara Guarch, Pablo]

Hi Ravi,

> -----Original Message-----
> From: Kumar, Ravi1 [mailto:Ravi1.Kumar@amd.com]
> Sent: Wednesday, May 9, 2018 9:11 AM
> To: Thomas Monjalon <thomas@monjalon.net>
> Cc: De Lara Guarch, Pablo <pablo.de.lara.guarch@intel.com>; dev@dpdk.org;
> hemant.agrawal@nxp.com
> Subject: RE: [PATCH 1/2] crypto/ccp: enable CCP crypto poll mode driver by
> default
> 
> >09/05/2018 07:53, Kumar, Ravi1:
> >> >
> >> >I think this cannot be enabled by default, since it has an external
> dependency on OpenSSL.
> >>
> >> Hi Pablo,
> >>
> >> We were asked to enable the PMD by default in one of the previous emails.
> Unfortunately, we can't remove the dependency on OpenSSL. Kindly suggest the
> option in this case. We could leave this patch-set and have the code as-is, I
> mean the older compile-time option. If not, then this is our only option.
> >
> >If you have a dependency, you cannot enable by default.
> >
> Hi Thomas,
> 
> Ok. Could we still submit the 2nd patch for changing compile time to run time
> option and remove the first one?

I have two comments on the other patch. Could you submit a v2 of that patch and drop this first patch?

Thanks,
Pablo

> 
> Regards,
> Ravi

Re: [dpdk-dev] [PATCH 1/2] crypto/ccp: enable CCP crypto poll mode driver by default

[Kumar, Ravi1]

>Hi Ravi,
>
>> -----Original Message-----
>> From: Kumar, Ravi1 [mailto:Ravi1.Kumar@amd.com]
>> Sent: Wednesday, May 9, 2018 9:11 AM
>> To: Thomas Monjalon <thomas@monjalon.net>
>> Cc: De Lara Guarch, Pablo <pablo.de.lara.guarch@intel.com>; 
>> dev@dpdk.org; hemant.agrawal@nxp.com
>> Subject: RE: [PATCH 1/2] crypto/ccp: enable CCP crypto poll mode 
>> driver by default
>> 
>> >09/05/2018 07:53, Kumar, Ravi1:
>> >> >
>> >> >I think this cannot be enabled by default, since it has an 
>> >> >external
>> dependency on OpenSSL.
>> >>
>> >> Hi Pablo,
>> >>
>> >> We were asked to enable the PMD by default in one of the previous emails.
>> Unfortunately, we can't remove the dependency on OpenSSL. Kindly 
>> suggest the option in this case. We could leave this patch-set and 
>> have the code as-is, I mean the older compile-time option. If not, then this is our only option.
>> >
>> >If you have a dependency, you cannot enable by default.
>> >
>> Hi Thomas,
>> 
>> Ok. Could we still submit the 2nd patch for changing compile time to 
>> run time option and remove the first one?
>
>I have two comments on the other patch. Could you submit a v2 of that patch and drop this first patch?
>
>Thanks,
>Pablo

Hi Pablo,

Sure. I will submit v2 with the changes.

Regards,
Ravi
>
>> 
>> Regards,
>> Ravi
>
>

[dpdk-dev] [PATCH v2] crypto/ccp: support command line option to enable CPU based auth

[Ravi Kumar]

CCP PMD supports authentication offload to either of CCP or CPU.
The earlier version of patch provides this option as compile time.
This patch changes this option from compile time to run time.
User can pass "ccp_auth_opt=1" as an additional arguments to vdev
parameter to enable authentication operations on CPU.

Signed-off-by: Ravi Kumar <Ravi1.kumar@amd.com>
---
 config/common_base                   |    1 -
 doc/guides/cryptodevs/ccp.rst        |   13 +-
 drivers/crypto/ccp/ccp_crypto.c      |  413 +++++++------
 drivers/crypto/ccp/ccp_crypto.h      |   10 +-
 drivers/crypto/ccp/ccp_pmd_ops.c     | 1081 +++++++++++++++++-----------------
 drivers/crypto/ccp/ccp_pmd_private.h |    6 +-
 drivers/crypto/ccp/rte_ccp_pmd.c     |  231 +++++++-
 7 files changed, 969 insertions(+), 786 deletions(-)

diff --git a/config/common_base b/config/common_base
index 0d181ac..66f157f 100644
--- a/config/common_base
+++ b/config/common_base
@@ -556,7 +556,6 @@ CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
 # Compile PMD for AMD CCP crypto device
 #
 CONFIG_RTE_LIBRTE_PMD_CCP=n
-CONFIG_RTE_LIBRTE_PMD_CCP_CPU_AUTH=n
 
 #
 # Compile PMD for Marvell Crypto device
diff --git a/doc/guides/cryptodevs/ccp.rst b/doc/guides/cryptodevs/ccp.rst
index 1fcd462..cdb9374 100644
--- a/doc/guides/cryptodevs/ccp.rst
+++ b/doc/guides/cryptodevs/ccp.rst
@@ -56,14 +56,11 @@ AEAD algorithms:
 Installation
 ------------
 
-To compile CCP PMD, it has to be enabled in the config/common_base file.
+To compile CCP PMD, ensure that following is enabled in your DPDK configuration file.
 * ``CONFIG_RTE_LIBRTE_PMD_CCP=y``
 
-The CCP PMD also supports computing authentication over CPU with cipher offloaded
-to CCP. To enable this feature, enable following in the configuration.
-* ``CONFIG_RTE_LIBRTE_PMD_CCP_CPU_AUTH=y``
-
-This code was verified on Ubuntu 16.04.
+The CCP PMD also supports computing authentication over CPU with cipher offloaded to CCP.
+To enable this feature, pass an additional argument as ccp_auth_opt=1 to --vdev parameters.
 
 Initialization
 --------------
@@ -98,5 +95,5 @@ To verify real traffic l2fwd-crypto example can be used with following command:
 Limitations
 -----------
 
-* Chained mbufs are not supported
-* MD5_HMAC is supported only if ``CONFIG_RTE_LIBRTE_PMD_CCP_CPU_AUTH=y`` is enabled in configuration
+* Chained mbufs are not supported.
+* MD5_HMAC is supported only for CPU based authentication.
diff --git a/drivers/crypto/ccp/ccp_crypto.c b/drivers/crypto/ccp/ccp_crypto.c
index a0809e4..3ce0f39 100644
--- a/drivers/crypto/ccp/ccp_crypto.c
+++ b/drivers/crypto/ccp/ccp_crypto.c
@@ -27,11 +27,9 @@
 #include "ccp_pci.h"
 #include "ccp_pmd_private.h"
 
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
 #include <openssl/conf.h>
 #include <openssl/err.h>
 #include <openssl/hmac.h>
-#endif
 
 /* SHA initial context values */
 static uint32_t ccp_sha1_init[SHA_COMMON_DIGEST_SIZE / sizeof(uint32_t)] = {
@@ -766,17 +764,19 @@ ccp_configure_session_auth(struct ccp_session *sess,
 	else
 		sess->auth.op = CCP_AUTH_OP_VERIFY;
 	switch (auth_xform->algo) {
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
 	case RTE_CRYPTO_AUTH_MD5_HMAC:
-		sess->auth.algo = CCP_AUTH_ALGO_MD5_HMAC;
-		sess->auth.offset = (CCP_SB_BYTES << 1) - MD5_DIGEST_SIZE;
-		sess->auth.key_length = auth_xform->key.length;
-		sess->auth.block_size = MD5_BLOCK_SIZE;
-		memset(sess->auth.key, 0, sess->auth.block_size);
-		rte_memcpy(sess->auth.key, auth_xform->key.data,
-			   auth_xform->key.length);
+		if (sess->auth_opt) {
+			sess->auth.algo = CCP_AUTH_ALGO_MD5_HMAC;
+			sess->auth.offset = ((CCP_SB_BYTES << 1) -
+					     MD5_DIGEST_SIZE);
+			sess->auth.key_length = auth_xform->key.length;
+			sess->auth.block_size = MD5_BLOCK_SIZE;
+			memset(sess->auth.key, 0, sess->auth.block_size);
+			rte_memcpy(sess->auth.key, auth_xform->key.data,
+				   auth_xform->key.length);
+		} else
+			return -1; /* HMAC MD5 not supported on CCP */
 		break;
-#endif
 	case RTE_CRYPTO_AUTH_SHA1:
 		sess->auth.engine = CCP_ENGINE_SHA;
 		sess->auth.algo = CCP_AUTH_ALGO_SHA1;
@@ -786,33 +786,34 @@ ccp_configure_session_auth(struct ccp_session *sess,
 		sess->auth.offset = CCP_SB_BYTES - SHA1_DIGEST_SIZE;
 		break;
 	case RTE_CRYPTO_AUTH_SHA1_HMAC:
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-		if (auth_xform->key.length > SHA1_BLOCK_SIZE)
-			return -1;
-		sess->auth.algo = CCP_AUTH_ALGO_SHA1_HMAC;
-		sess->auth.offset = CCP_SB_BYTES - SHA1_DIGEST_SIZE;
-		sess->auth.block_size = SHA1_BLOCK_SIZE;
-		sess->auth.key_length = auth_xform->key.length;
-		memset(sess->auth.key, 0, sess->auth.block_size);
-		rte_memcpy(sess->auth.key, auth_xform->key.data,
-			   auth_xform->key.length);
-#else
-		if (auth_xform->key.length > SHA1_BLOCK_SIZE)
-			return -1;
-		sess->auth.engine = CCP_ENGINE_SHA;
-		sess->auth.algo = CCP_AUTH_ALGO_SHA1_HMAC;
-		sess->auth.ut.sha_type = CCP_SHA_TYPE_1;
-		sess->auth.ctx_len = CCP_SB_BYTES;
-		sess->auth.offset = CCP_SB_BYTES - SHA1_DIGEST_SIZE;
-		sess->auth.block_size = SHA1_BLOCK_SIZE;
-		sess->auth.key_length = auth_xform->key.length;
-		memset(sess->auth.key, 0, sess->auth.block_size);
-		memset(sess->auth.pre_compute, 0, sess->auth.ctx_len << 1);
-		rte_memcpy(sess->auth.key, auth_xform->key.data,
-			   auth_xform->key.length);
-		if (generate_partial_hash(sess))
-			return -1;
-#endif
+		if (sess->auth_opt) {
+			if (auth_xform->key.length > SHA1_BLOCK_SIZE)
+				return -1;
+			sess->auth.algo = CCP_AUTH_ALGO_SHA1_HMAC;
+			sess->auth.offset = CCP_SB_BYTES - SHA1_DIGEST_SIZE;
+			sess->auth.block_size = SHA1_BLOCK_SIZE;
+			sess->auth.key_length = auth_xform->key.length;
+			memset(sess->auth.key, 0, sess->auth.block_size);
+			rte_memcpy(sess->auth.key, auth_xform->key.data,
+				   auth_xform->key.length);
+		} else {
+			if (auth_xform->key.length > SHA1_BLOCK_SIZE)
+				return -1;
+			sess->auth.engine = CCP_ENGINE_SHA;
+			sess->auth.algo = CCP_AUTH_ALGO_SHA1_HMAC;
+			sess->auth.ut.sha_type = CCP_SHA_TYPE_1;
+			sess->auth.ctx_len = CCP_SB_BYTES;
+			sess->auth.offset = CCP_SB_BYTES - SHA1_DIGEST_SIZE;
+			sess->auth.block_size = SHA1_BLOCK_SIZE;
+			sess->auth.key_length = auth_xform->key.length;
+			memset(sess->auth.key, 0, sess->auth.block_size);
+			memset(sess->auth.pre_compute, 0,
+			       sess->auth.ctx_len << 1);
+			rte_memcpy(sess->auth.key, auth_xform->key.data,
+				   auth_xform->key.length);
+			if (generate_partial_hash(sess))
+				return -1;
+		}
 		break;
 	case RTE_CRYPTO_AUTH_SHA224:
 		sess->auth.algo = CCP_AUTH_ALGO_SHA224;
@@ -823,33 +824,34 @@ ccp_configure_session_auth(struct ccp_session *sess,
 		sess->auth.offset = CCP_SB_BYTES - SHA224_DIGEST_SIZE;
 		break;
 	case RTE_CRYPTO_AUTH_SHA224_HMAC:
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-		if (auth_xform->key.length > SHA224_BLOCK_SIZE)
-			return -1;
-		sess->auth.algo = CCP_AUTH_ALGO_SHA224_HMAC;
-		sess->auth.offset = CCP_SB_BYTES - SHA224_DIGEST_SIZE;
-		sess->auth.block_size = SHA224_BLOCK_SIZE;
-		sess->auth.key_length = auth_xform->key.length;
-		memset(sess->auth.key, 0, sess->auth.block_size);
-		rte_memcpy(sess->auth.key, auth_xform->key.data,
-			   auth_xform->key.length);
-#else
-		if (auth_xform->key.length > SHA224_BLOCK_SIZE)
-			return -1;
-		sess->auth.algo = CCP_AUTH_ALGO_SHA224_HMAC;
-		sess->auth.engine = CCP_ENGINE_SHA;
-		sess->auth.ut.sha_type = CCP_SHA_TYPE_224;
-		sess->auth.ctx_len = CCP_SB_BYTES;
-		sess->auth.offset = CCP_SB_BYTES - SHA224_DIGEST_SIZE;
-		sess->auth.block_size = SHA224_BLOCK_SIZE;
-		sess->auth.key_length = auth_xform->key.length;
-		memset(sess->auth.key, 0, sess->auth.block_size);
-		memset(sess->auth.pre_compute, 0, sess->auth.ctx_len << 1);
-		rte_memcpy(sess->auth.key, auth_xform->key.data,
-			   auth_xform->key.length);
-		if (generate_partial_hash(sess))
-			return -1;
-#endif
+		if (sess->auth_opt) {
+			if (auth_xform->key.length > SHA224_BLOCK_SIZE)
+				return -1;
+			sess->auth.algo = CCP_AUTH_ALGO_SHA224_HMAC;
+			sess->auth.offset = CCP_SB_BYTES - SHA224_DIGEST_SIZE;
+			sess->auth.block_size = SHA224_BLOCK_SIZE;
+			sess->auth.key_length = auth_xform->key.length;
+			memset(sess->auth.key, 0, sess->auth.block_size);
+			rte_memcpy(sess->auth.key, auth_xform->key.data,
+				   auth_xform->key.length);
+		} else {
+			if (auth_xform->key.length > SHA224_BLOCK_SIZE)
+				return -1;
+			sess->auth.algo = CCP_AUTH_ALGO_SHA224_HMAC;
+			sess->auth.engine = CCP_ENGINE_SHA;
+			sess->auth.ut.sha_type = CCP_SHA_TYPE_224;
+			sess->auth.ctx_len = CCP_SB_BYTES;
+			sess->auth.offset = CCP_SB_BYTES - SHA224_DIGEST_SIZE;
+			sess->auth.block_size = SHA224_BLOCK_SIZE;
+			sess->auth.key_length = auth_xform->key.length;
+			memset(sess->auth.key, 0, sess->auth.block_size);
+			memset(sess->auth.pre_compute, 0,
+			       sess->auth.ctx_len << 1);
+			rte_memcpy(sess->auth.key, auth_xform->key.data,
+				   auth_xform->key.length);
+			if (generate_partial_hash(sess))
+				return -1;
+		}
 		break;
 	case RTE_CRYPTO_AUTH_SHA3_224:
 		sess->auth.algo = CCP_AUTH_ALGO_SHA3_224;
@@ -884,33 +886,34 @@ ccp_configure_session_auth(struct ccp_session *sess,
 		sess->auth.offset = CCP_SB_BYTES - SHA256_DIGEST_SIZE;
 		break;
 	case RTE_CRYPTO_AUTH_SHA256_HMAC:
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-		if (auth_xform->key.length > SHA256_BLOCK_SIZE)
-			return -1;
-		sess->auth.algo = CCP_AUTH_ALGO_SHA256_HMAC;
-		sess->auth.offset = CCP_SB_BYTES - SHA256_DIGEST_SIZE;
-		sess->auth.block_size = SHA256_BLOCK_SIZE;
-		sess->auth.key_length = auth_xform->key.length;
-		memset(sess->auth.key, 0, sess->auth.block_size);
-		rte_memcpy(sess->auth.key, auth_xform->key.data,
-			   auth_xform->key.length);
-#else
-		if (auth_xform->key.length > SHA256_BLOCK_SIZE)
-			return -1;
-		sess->auth.algo = CCP_AUTH_ALGO_SHA256_HMAC;
-		sess->auth.engine = CCP_ENGINE_SHA;
-		sess->auth.ut.sha_type = CCP_SHA_TYPE_256;
-		sess->auth.ctx_len = CCP_SB_BYTES;
-		sess->auth.offset = CCP_SB_BYTES - SHA256_DIGEST_SIZE;
-		sess->auth.block_size = SHA256_BLOCK_SIZE;
-		sess->auth.key_length = auth_xform->key.length;
-		memset(sess->auth.key, 0, sess->auth.block_size);
-		memset(sess->auth.pre_compute, 0, sess->auth.ctx_len << 1);
-		rte_memcpy(sess->auth.key, auth_xform->key.data,
-			   auth_xform->key.length);
-		if (generate_partial_hash(sess))
-			return -1;
-#endif
+		if (sess->auth_opt) {
+			if (auth_xform->key.length > SHA256_BLOCK_SIZE)
+				return -1;
+			sess->auth.algo = CCP_AUTH_ALGO_SHA256_HMAC;
+			sess->auth.offset = CCP_SB_BYTES - SHA256_DIGEST_SIZE;
+			sess->auth.block_size = SHA256_BLOCK_SIZE;
+			sess->auth.key_length = auth_xform->key.length;
+			memset(sess->auth.key, 0, sess->auth.block_size);
+			rte_memcpy(sess->auth.key, auth_xform->key.data,
+				   auth_xform->key.length);
+		} else {
+			if (auth_xform->key.length > SHA256_BLOCK_SIZE)
+				return -1;
+			sess->auth.algo = CCP_AUTH_ALGO_SHA256_HMAC;
+			sess->auth.engine = CCP_ENGINE_SHA;
+			sess->auth.ut.sha_type = CCP_SHA_TYPE_256;
+			sess->auth.ctx_len = CCP_SB_BYTES;
+			sess->auth.offset = CCP_SB_BYTES - SHA256_DIGEST_SIZE;
+			sess->auth.block_size = SHA256_BLOCK_SIZE;
+			sess->auth.key_length = auth_xform->key.length;
+			memset(sess->auth.key, 0, sess->auth.block_size);
+			memset(sess->auth.pre_compute, 0,
+			       sess->auth.ctx_len << 1);
+			rte_memcpy(sess->auth.key, auth_xform->key.data,
+				   auth_xform->key.length);
+			if (generate_partial_hash(sess))
+				return -1;
+		}
 		break;
 	case RTE_CRYPTO_AUTH_SHA3_256:
 		sess->auth.algo = CCP_AUTH_ALGO_SHA3_256;
@@ -945,33 +948,36 @@ ccp_configure_session_auth(struct ccp_session *sess,
 		sess->auth.offset = (CCP_SB_BYTES << 1) - SHA384_DIGEST_SIZE;
 		break;
 	case RTE_CRYPTO_AUTH_SHA384_HMAC:
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-		if (auth_xform->key.length > SHA384_BLOCK_SIZE)
-			return -1;
-		sess->auth.algo = CCP_AUTH_ALGO_SHA384_HMAC;
-		sess->auth.offset = (CCP_SB_BYTES << 1) - SHA384_DIGEST_SIZE;
-		sess->auth.block_size = SHA384_BLOCK_SIZE;
-		sess->auth.key_length = auth_xform->key.length;
-		memset(sess->auth.key, 0, sess->auth.block_size);
-		rte_memcpy(sess->auth.key, auth_xform->key.data,
-			   auth_xform->key.length);
-#else
-		if (auth_xform->key.length > SHA384_BLOCK_SIZE)
-			return -1;
-		sess->auth.algo = CCP_AUTH_ALGO_SHA384_HMAC;
-		sess->auth.engine = CCP_ENGINE_SHA;
-		sess->auth.ut.sha_type = CCP_SHA_TYPE_384;
-		sess->auth.ctx_len = CCP_SB_BYTES << 1;
-		sess->auth.offset = (CCP_SB_BYTES << 1) - SHA384_DIGEST_SIZE;
-		sess->auth.block_size = SHA384_BLOCK_SIZE;
-		sess->auth.key_length = auth_xform->key.length;
-		memset(sess->auth.key, 0, sess->auth.block_size);
-		memset(sess->auth.pre_compute, 0, sess->auth.ctx_len << 1);
-		rte_memcpy(sess->auth.key, auth_xform->key.data,
-			   auth_xform->key.length);
-		if (generate_partial_hash(sess))
-			return -1;
-#endif
+		if (sess->auth_opt) {
+			if (auth_xform->key.length > SHA384_BLOCK_SIZE)
+				return -1;
+			sess->auth.algo = CCP_AUTH_ALGO_SHA384_HMAC;
+			sess->auth.offset = ((CCP_SB_BYTES << 1) -
+					     SHA384_DIGEST_SIZE);
+			sess->auth.block_size = SHA384_BLOCK_SIZE;
+			sess->auth.key_length = auth_xform->key.length;
+			memset(sess->auth.key, 0, sess->auth.block_size);
+			rte_memcpy(sess->auth.key, auth_xform->key.data,
+				   auth_xform->key.length);
+		} else {
+			if (auth_xform->key.length > SHA384_BLOCK_SIZE)
+				return -1;
+			sess->auth.algo = CCP_AUTH_ALGO_SHA384_HMAC;
+			sess->auth.engine = CCP_ENGINE_SHA;
+			sess->auth.ut.sha_type = CCP_SHA_TYPE_384;
+			sess->auth.ctx_len = CCP_SB_BYTES << 1;
+			sess->auth.offset = ((CCP_SB_BYTES << 1) -
+					     SHA384_DIGEST_SIZE);
+			sess->auth.block_size = SHA384_BLOCK_SIZE;
+			sess->auth.key_length = auth_xform->key.length;
+			memset(sess->auth.key, 0, sess->auth.block_size);
+			memset(sess->auth.pre_compute, 0,
+			       sess->auth.ctx_len << 1);
+			rte_memcpy(sess->auth.key, auth_xform->key.data,
+				   auth_xform->key.length);
+			if (generate_partial_hash(sess))
+				return -1;
+		}
 		break;
 	case RTE_CRYPTO_AUTH_SHA3_384:
 		sess->auth.algo = CCP_AUTH_ALGO_SHA3_384;
@@ -1006,33 +1012,36 @@ ccp_configure_session_auth(struct ccp_session *sess,
 		sess->auth.offset = (CCP_SB_BYTES << 1) - SHA512_DIGEST_SIZE;
 		break;
 	case RTE_CRYPTO_AUTH_SHA512_HMAC:
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-		if (auth_xform->key.length > SHA512_BLOCK_SIZE)
-			return -1;
-		sess->auth.algo = CCP_AUTH_ALGO_SHA512_HMAC;
-		sess->auth.offset = (CCP_SB_BYTES << 1) - SHA512_DIGEST_SIZE;
-		sess->auth.block_size = SHA512_BLOCK_SIZE;
-		sess->auth.key_length = auth_xform->key.length;
-		memset(sess->auth.key, 0, sess->auth.block_size);
-		rte_memcpy(sess->auth.key, auth_xform->key.data,
-			   auth_xform->key.length);
-#else
-		if (auth_xform->key.length > SHA512_BLOCK_SIZE)
-			return -1;
-		sess->auth.algo = CCP_AUTH_ALGO_SHA512_HMAC;
-		sess->auth.engine = CCP_ENGINE_SHA;
-		sess->auth.ut.sha_type = CCP_SHA_TYPE_512;
-		sess->auth.ctx_len = CCP_SB_BYTES << 1;
-		sess->auth.offset = (CCP_SB_BYTES << 1) - SHA512_DIGEST_SIZE;
-		sess->auth.block_size = SHA512_BLOCK_SIZE;
-		sess->auth.key_length = auth_xform->key.length;
-		memset(sess->auth.key, 0, sess->auth.block_size);
-		memset(sess->auth.pre_compute, 0, sess->auth.ctx_len << 1);
-		rte_memcpy(sess->auth.key, auth_xform->key.data,
-			   auth_xform->key.length);
-		if (generate_partial_hash(sess))
-			return -1;
-#endif
+		if (sess->auth_opt) {
+			if (auth_xform->key.length > SHA512_BLOCK_SIZE)
+				return -1;
+			sess->auth.algo = CCP_AUTH_ALGO_SHA512_HMAC;
+			sess->auth.offset = ((CCP_SB_BYTES << 1) -
+					     SHA512_DIGEST_SIZE);
+			sess->auth.block_size = SHA512_BLOCK_SIZE;
+			sess->auth.key_length = auth_xform->key.length;
+			memset(sess->auth.key, 0, sess->auth.block_size);
+			rte_memcpy(sess->auth.key, auth_xform->key.data,
+				   auth_xform->key.length);
+		} else {
+			if (auth_xform->key.length > SHA512_BLOCK_SIZE)
+				return -1;
+			sess->auth.algo = CCP_AUTH_ALGO_SHA512_HMAC;
+			sess->auth.engine = CCP_ENGINE_SHA;
+			sess->auth.ut.sha_type = CCP_SHA_TYPE_512;
+			sess->auth.ctx_len = CCP_SB_BYTES << 1;
+			sess->auth.offset = ((CCP_SB_BYTES << 1) -
+					     SHA512_DIGEST_SIZE);
+			sess->auth.block_size = SHA512_BLOCK_SIZE;
+			sess->auth.key_length = auth_xform->key.length;
+			memset(sess->auth.key, 0, sess->auth.block_size);
+			memset(sess->auth.pre_compute, 0,
+			       sess->auth.ctx_len << 1);
+			rte_memcpy(sess->auth.key, auth_xform->key.data,
+				   auth_xform->key.length);
+			if (generate_partial_hash(sess))
+				return -1;
+		}
 		break;
 	case RTE_CRYPTO_AUTH_SHA3_512:
 		sess->auth.algo = CCP_AUTH_ALGO_SHA3_512;
@@ -1157,13 +1166,15 @@ ccp_configure_session_aead(struct ccp_session *sess,
 
 int
 ccp_set_session_parameters(struct ccp_session *sess,
-			   const struct rte_crypto_sym_xform *xform)
+			   const struct rte_crypto_sym_xform *xform,
+			   struct ccp_private *internals)
 {
 	const struct rte_crypto_sym_xform *cipher_xform = NULL;
 	const struct rte_crypto_sym_xform *auth_xform = NULL;
 	const struct rte_crypto_sym_xform *aead_xform = NULL;
 	int ret = 0;
 
+	sess->auth_opt = internals->auth_opt;
 	sess->cmd_id = ccp_get_cmd_id(xform);
 
 	switch (sess->cmd_id) {
@@ -1259,22 +1270,16 @@ ccp_auth_slot(struct ccp_session *session)
 		count = 3;
 		/**< op + lsb passthrough cpy to/from*/
 		break;
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
 	case CCP_AUTH_ALGO_MD5_HMAC:
 		break;
-#endif
 	case CCP_AUTH_ALGO_SHA1_HMAC:
 	case CCP_AUTH_ALGO_SHA224_HMAC:
 	case CCP_AUTH_ALGO_SHA256_HMAC:
-#ifndef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-		count = 6;
-#endif
+		if (session->auth_opt == 0)
+			count = 6;
 		break;
 	case CCP_AUTH_ALGO_SHA384_HMAC:
 	case CCP_AUTH_ALGO_SHA512_HMAC:
-#ifndef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-		count = 7;
-#endif
 		/**
 		 * 1. Load PHash1 = H(k ^ ipad); to LSB
 		 * 2. generate IHash = H(hash on meassage with PHash1
@@ -1285,6 +1290,8 @@ ccp_auth_slot(struct ccp_session *session)
 		 * as init value);
 		 * 6. Retrieve HMAC output from LSB to host memory
 		 */
+		if (session->auth_opt == 0)
+			count = 7;
 		break;
 	case CCP_AUTH_ALGO_SHA3_224:
 	case CCP_AUTH_ALGO_SHA3_256:
@@ -1381,7 +1388,6 @@ ccp_compute_slot_count(struct ccp_session *session)
 	return count;
 }
 
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
 static uint8_t
 algo_select(int sessalgo,
 	    const EVP_MD **algo)
@@ -1495,7 +1501,6 @@ static int cpu_crypto_auth(struct ccp_qp *qp,
 	EVP_PKEY_free(pkey);
 	return 0;
 }
-#endif
 
 static void
 ccp_perform_passthru(struct ccp_passthru *pst,
@@ -2592,26 +2597,24 @@ ccp_crypto_auth(struct rte_crypto_op *op,
 		result = ccp_perform_sha(op, cmd_q);
 		b_info->desccnt += 3;
 		break;
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
 	case CCP_AUTH_ALGO_MD5_HMAC:
+		if (session->auth_opt == 0)
+			result = -1;
 		break;
-#endif
 	case CCP_AUTH_ALGO_SHA1_HMAC:
 	case CCP_AUTH_ALGO_SHA224_HMAC:
 	case CCP_AUTH_ALGO_SHA256_HMAC:
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-		break;
-#endif
-		result = ccp_perform_hmac(op, cmd_q);
-		b_info->desccnt += 6;
+		if (session->auth_opt == 0) {
+			result = ccp_perform_hmac(op, cmd_q);
+			b_info->desccnt += 6;
+		}
 		break;
 	case CCP_AUTH_ALGO_SHA384_HMAC:
 	case CCP_AUTH_ALGO_SHA512_HMAC:
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-		break;
-#endif
-		result = ccp_perform_hmac(op, cmd_q);
-		b_info->desccnt += 7;
+		if (session->auth_opt == 0) {
+			result = ccp_perform_hmac(op, cmd_q);
+			b_info->desccnt += 7;
+		}
 		break;
 	case CCP_AUTH_ALGO_SHA3_224:
 	case CCP_AUTH_ALGO_SHA3_256:
@@ -2682,22 +2685,20 @@ process_ops_to_enqueue(struct ccp_qp *qp,
 	int i, result = 0;
 	struct ccp_batch_info *b_info;
 	struct ccp_session *session;
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
 	EVP_MD_CTX *auth_ctx = NULL;
-#endif
 
 	if (rte_mempool_get(qp->batch_mp, (void **)&b_info)) {
 		CCP_LOG_ERR("batch info allocation failed");
 		return 0;
 	}
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
+
 	auth_ctx = EVP_MD_CTX_create();
 	if (unlikely(!auth_ctx)) {
 		CCP_LOG_ERR("Unable to create auth ctx");
 		return 0;
 	}
 	b_info->auth_ctr = 0;
-#endif
+
 	/* populate batch info necessary for dequeue */
 	b_info->op_idx = 0;
 	b_info->lsb_buf_idx = 0;
@@ -2718,12 +2719,12 @@ process_ops_to_enqueue(struct ccp_qp *qp,
 			result = ccp_crypto_cipher(op[i], cmd_q, b_info);
 			break;
 		case CCP_CMD_AUTH:
-			result = ccp_crypto_auth(op[i], cmd_q, b_info);
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-			b_info->auth_ctr++;
-			result = cpu_crypto_auth(qp, op[i],
-						 session, auth_ctx);
-#endif
+			if (session->auth_opt) {
+				b_info->auth_ctr++;
+				result = cpu_crypto_auth(qp, op[i],
+							 session, auth_ctx);
+			} else
+				result = ccp_crypto_auth(op[i], cmd_q, b_info);
 			break;
 		case CCP_CMD_CIPHER_HASH:
 			result = ccp_crypto_cipher(op[i], cmd_q, b_info);
@@ -2732,13 +2733,15 @@ process_ops_to_enqueue(struct ccp_qp *qp,
 			result = ccp_crypto_auth(op[i], cmd_q, b_info);
 			break;
 		case CCP_CMD_HASH_CIPHER:
-			result = ccp_crypto_auth(op[i], cmd_q, b_info);
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-			result = cpu_crypto_auth(qp, op[i],
-						 session, auth_ctx);
-			if (op[i]->status != RTE_CRYPTO_OP_STATUS_SUCCESS)
-				continue;
-#endif
+			if (session->auth_opt) {
+				result = cpu_crypto_auth(qp, op[i],
+							 session, auth_ctx);
+				if (op[i]->status !=
+				    RTE_CRYPTO_OP_STATUS_SUCCESS)
+					continue;
+			} else
+				result = ccp_crypto_auth(op[i], cmd_q, b_info);
+
 			if (result)
 				break;
 			result = ccp_crypto_cipher(op[i], cmd_q, b_info);
@@ -2772,9 +2775,7 @@ process_ops_to_enqueue(struct ccp_qp *qp,
 
 	rte_ring_enqueue(qp->processed_pkts, (void *)b_info);
 
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
 	EVP_MD_CTX_destroy(auth_ctx);
-#endif
 	return i;
 }
 
@@ -2843,11 +2844,7 @@ static inline void ccp_auth_dq_prepare(struct rte_crypto_op *op)
 }
 
 static int
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
 ccp_prepare_ops(struct ccp_qp *qp,
-#else
-ccp_prepare_ops(struct ccp_qp *qp __rte_unused,
-#endif
 		struct rte_crypto_op **op_d,
 		struct ccp_batch_info *b_info,
 		uint16_t nb_ops)
@@ -2855,7 +2852,6 @@ ccp_prepare_ops(struct ccp_qp *qp __rte_unused,
 	int i, min_ops;
 	struct ccp_session *session;
 
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
 	EVP_MD_CTX *auth_ctx = NULL;
 
 	auth_ctx = EVP_MD_CTX_create();
@@ -2863,7 +2859,6 @@ ccp_prepare_ops(struct ccp_qp *qp __rte_unused,
 		CCP_LOG_ERR("Unable to create auth ctx");
 		return 0;
 	}
-#endif
 	min_ops = RTE_MIN(nb_ops, b_info->opcnt);
 
 	for (i = 0; i < min_ops; i++) {
@@ -2876,24 +2871,21 @@ ccp_prepare_ops(struct ccp_qp *qp __rte_unused,
 			op_d[i]->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
 			break;
 		case CCP_CMD_AUTH:
-#ifndef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-			ccp_auth_dq_prepare(op_d[i]);
-#endif
+			if (session->auth_opt == 0)
+				ccp_auth_dq_prepare(op_d[i]);
 			break;
 		case CCP_CMD_CIPHER_HASH:
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-			cpu_crypto_auth(qp, op_d[i],
-					session, auth_ctx);
-#else
-			ccp_auth_dq_prepare(op_d[i]);
-#endif
+			if (session->auth_opt)
+				cpu_crypto_auth(qp, op_d[i],
+						session, auth_ctx);
+			else
+				ccp_auth_dq_prepare(op_d[i]);
 			break;
 		case CCP_CMD_HASH_CIPHER:
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-			op_d[i]->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
-#else
-			ccp_auth_dq_prepare(op_d[i]);
-#endif
+			if (session->auth_opt)
+				op_d[i]->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
+			else
+				ccp_auth_dq_prepare(op_d[i]);
 			break;
 		case CCP_CMD_COMBINED:
 			ccp_auth_dq_prepare(op_d[i]);
@@ -2903,9 +2895,7 @@ ccp_prepare_ops(struct ccp_qp *qp __rte_unused,
 		}
 	}
 
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
 	EVP_MD_CTX_destroy(auth_ctx);
-#endif
 	b_info->opcnt -= min_ops;
 	return min_ops;
 }
@@ -2925,10 +2915,9 @@ process_ops_to_dequeue(struct ccp_qp *qp,
 	} else if (rte_ring_dequeue(qp->processed_pkts,
 				    (void **)&b_info))
 		return 0;
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
+
 	if (b_info->auth_ctr == b_info->opcnt)
 		goto success;
-#endif
 	cur_head_offset = CCP_READ_REG(b_info->cmd_q->reg_base,
 				       CMD_Q_HEAD_LO_BASE);
 
diff --git a/drivers/crypto/ccp/ccp_crypto.h b/drivers/crypto/ccp/ccp_crypto.h
index dd89ad9..882b398 100644
--- a/drivers/crypto/ccp/ccp_crypto.h
+++ b/drivers/crypto/ccp/ccp_crypto.h
@@ -42,10 +42,9 @@
 #define HMAC_IPAD_VALUE 0x36
 #define HMAC_OPAD_VALUE 0x5c
 
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
+/* MD5 */
 #define MD5_DIGEST_SIZE         16
 #define MD5_BLOCK_SIZE          64
-#endif
 
 /* SHA */
 #define SHA_COMMON_DIGEST_SIZE	32
@@ -235,9 +234,7 @@ enum ccp_hash_algo {
 	CCP_AUTH_ALGO_SHA3_512_HMAC,
 	CCP_AUTH_ALGO_AES_CMAC,
 	CCP_AUTH_ALGO_AES_GCM,
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
 	CCP_AUTH_ALGO_MD5_HMAC,
-#endif
 };
 
 /**
@@ -250,6 +247,7 @@ enum ccp_hash_op {
 
 /* CCP crypto private session structure */
 struct ccp_session {
+	bool auth_opt;
 	enum ccp_cmd_order cmd_id;
 	/**< chain order mode */
 	struct {
@@ -321,6 +319,7 @@ struct ccp_session {
 extern uint8_t ccp_cryptodev_driver_id;
 
 struct ccp_qp;
+struct ccp_private;
 
 /**
  * Set and validate CCP crypto session parameters
@@ -330,7 +329,8 @@ struct ccp_qp;
  * @return 0 on success otherwise -1
  */
 int ccp_set_session_parameters(struct ccp_session *sess,
-			       const struct rte_crypto_sym_xform *xform);
+			       const struct rte_crypto_sym_xform *xform,
+			       struct ccp_private *internals);
 
 /**
  * Find count of slots
diff --git a/drivers/crypto/ccp/ccp_pmd_ops.c b/drivers/crypto/ccp/ccp_pmd_ops.c
index 3d0d875..80b75cc 100644
--- a/drivers/crypto/ccp/ccp_pmd_ops.c
+++ b/drivers/crypto/ccp/ccp_pmd_ops.c
@@ -12,538 +12,547 @@
 #include "ccp_dev.h"
 #include "ccp_crypto.h"
 
-static const struct rte_cryptodev_capabilities ccp_pmd_capabilities[] = {
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-	{	/* MD5 HMAC */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_MD5_HMAC,
-				 .block_size = 64,
-				 .key_size = {
-					 .min = 1,
-					 .max = 64,
-					 .increment = 1
-				 },
-				 .digest_size = {
-					 .min = 16,
-					 .max = 16,
-					 .increment = 0
-				 },
-				 .aad_size = { 0 }
-			}, }
-		}, }
-	},
-#endif
-	{	/* SHA1 */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_SHA1,
-				 .block_size = 64,
-				 .key_size = {
-					 .min = 0,
-					 .max = 0,
-					 .increment = 0
-				 },
-				 .digest_size = {
-					 .min = 20,
-					 .max = 20,
-					 .increment = 0
-				 },
-				 .aad_size = { 0 }
-			 }, }
-		}, }
-	},
-	{	/* SHA1 HMAC */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
-				 .block_size = 64,
-				 .key_size = {
-					 .min = 1,
-					 .max = 64,
-					 .increment = 1
-				 },
-				 .digest_size = {
-					 .min = 20,
-					 .max = 20,
-					 .increment = 0
-				 },
-				 .aad_size = { 0 }
-			 }, }
-		}, }
-	},
-	{	/* SHA224 */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_SHA224,
-				 .block_size = 64,
-				 .key_size = {
-					 .min = 0,
-					 .max = 0,
-					 .increment = 0
-				 },
-				 .digest_size = {
-					 .min = 28,
-					 .max = 28,
-					 .increment = 0
-				 },
-				 .aad_size = { 0 }
-			 }, }
-		}, }
-	},
-	{	/* SHA224 HMAC */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_SHA224_HMAC,
-				 .block_size = 64,
-				 .key_size = {
-					 .min = 1,
-					 .max = 64,
-					 .increment = 1
-				 },
-				 .digest_size = {
-					 .min = 28,
-					 .max = 28,
-					 .increment = 0
-				 },
-				 .aad_size = { 0 }
-			 }, }
-		}, }
-	},
-	{	/* SHA3-224 */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_SHA3_224,
-				 .block_size = 144,
-				 .key_size = {
-					 .min = 0,
-					 .max = 0,
-					 .increment = 0
-				 },
-				 .digest_size = {
-					 .min = 28,
-					 .max = 28,
-					 .increment = 0
-				 },
-				 .aad_size = { 0 }
-			 }, }
-		}, }
-	},
-	{	/* SHA3-224  HMAC*/
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_SHA3_224_HMAC,
-				 .block_size = 144,
-				 .key_size = {
-					 .min = 1,
-					 .max = 144,
-					 .increment = 1
-				 },
-				 .digest_size = {
-					 .min = 28,
-					 .max = 28,
-					 .increment = 0
-				 },
-				 .aad_size = { 0 }
-			 }, }
-		}, }
-	},
-	{	/* SHA256 */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_SHA256,
-				 .block_size = 64,
-				 .key_size = {
-					 .min = 0,
-					 .max = 0,
-					 .increment = 0
-				 },
-				 .digest_size = {
-					 .min = 32,
-					 .max = 32,
-					 .increment = 0
-				 },
-				 .aad_size = { 0 }
-			 }, }
-		}, }
-	},
-	{	/* SHA256 HMAC */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_SHA256_HMAC,
-				 .block_size = 64,
-				 .key_size = {
-					 .min = 1,
-					 .max = 64,
-					 .increment = 1
-				 },
-				 .digest_size = {
-					 .min = 32,
-					 .max = 32,
-					 .increment = 0
-				 },
-				 .aad_size = { 0 }
-			 }, }
-		}, }
-	},
-	{	/* SHA3-256 */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_SHA3_256,
-				 .block_size = 136,
-				 .key_size = {
-					 .min = 0,
-					 .max = 0,
-					 .increment = 0
-				 },
-				 .digest_size = {
-					 .min = 32,
-					 .max = 32,
-					 .increment = 0
-				 },
-				 .aad_size = { 0 }
-			 }, }
-		}, }
-	},
-	{	/* SHA3-256-HMAC */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_SHA3_256_HMAC,
-				 .block_size = 136,
-				 .key_size = {
-					 .min = 1,
-					 .max = 136,
-					 .increment = 1
-				 },
-				 .digest_size = {
-					 .min = 32,
-					 .max = 32,
-					 .increment = 0
-				 },
-				 .aad_size = { 0 }
-			 }, }
-		}, }
-	},
-	{	/* SHA384 */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_SHA384,
-				 .block_size = 128,
-				 .key_size = {
-					 .min = 0,
-					 .max = 0,
-					 .increment = 0
-				 },
-				 .digest_size = {
-					 .min = 48,
-					 .max = 48,
-					 .increment = 0
-				 },
-				 .aad_size = { 0 }
-			 }, }
-		}, }
-	},
-	{	/* SHA384 HMAC */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_SHA384_HMAC,
-				 .block_size = 128,
-				 .key_size = {
-					 .min = 1,
-					 .max = 128,
-					 .increment = 1
-				 },
-				 .digest_size = {
-					 .min = 48,
-					 .max = 48,
-					 .increment = 0
-				 },
-				 .aad_size = { 0 }
-			 }, }
-		}, }
-	},
-	{	/* SHA3-384 */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_SHA3_384,
-				 .block_size = 104,
-				 .key_size = {
-					 .min = 0,
-					 .max = 0,
-					 .increment = 0
-				 },
-				 .digest_size = {
-					 .min = 48,
-					 .max = 48,
-					 .increment = 0
-				 },
-				 .aad_size = { 0 }
-			 }, }
-		}, }
-	},
-	{	/* SHA3-384-HMAC */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_SHA3_384_HMAC,
-				 .block_size = 104,
-				 .key_size = {
-					 .min = 1,
-					 .max = 104,
-					 .increment = 1
-				 },
-				 .digest_size = {
-					 .min = 48,
-					 .max = 48,
-					 .increment = 0
-				 },
-				 .aad_size = { 0 }
-			 }, }
-		}, }
-	},
-	{	/* SHA512  */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_SHA512,
-				 .block_size = 128,
-				 .key_size = {
-					 .min = 0,
-					 .max = 0,
-					 .increment = 0
-				 },
-				 .digest_size = {
-					 .min = 64,
-					 .max = 64,
-					 .increment = 0
-				 },
-				 .aad_size = { 0 }
-			 }, }
-		}, }
-	},
-	{	/* SHA512 HMAC */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_SHA512_HMAC,
-				 .block_size = 128,
-				 .key_size = {
-					 .min = 1,
-					 .max = 128,
-					 .increment = 1
-				 },
-				 .digest_size = {
-					 .min = 64,
-					 .max = 64,
-					 .increment = 0
-				 },
-				 .aad_size = { 0 }
-			 }, }
-		}, }
-	},
-	{	/* SHA3-512  */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_SHA3_512,
-				 .block_size = 72,
-				 .key_size = {
-					 .min = 0,
-					 .max = 0,
-					 .increment = 0
-				 },
-				 .digest_size = {
-					 .min = 64,
-					 .max = 64,
-					 .increment = 0
-				 },
-				 .aad_size = { 0 }
-			 }, }
-		}, }
-	},
-	{	/* SHA3-512-HMAC  */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_SHA3_512_HMAC,
-				 .block_size = 72,
-				 .key_size = {
-					 .min = 1,
-					 .max = 72,
-					 .increment = 1
-				 },
-				 .digest_size = {
-					 .min = 64,
-					 .max = 64,
-					 .increment = 0
-				 },
-				 .aad_size = { 0 }
-			}, }
-		}, }
-	},
-	{	/*AES-CMAC */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_AES_CMAC,
-				 .block_size = 16,
-				 .key_size = {
-					 .min = 16,
-					 .max = 32,
-					 .increment = 8
-				 },
-				 .digest_size = {
-					 .min = 16,
-					 .max = 16,
-					 .increment = 0
-				 },
-			}, }
-		}, }
-	},
-	{       /* AES ECB */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
-			{.cipher = {
-				.algo = RTE_CRYPTO_CIPHER_AES_ECB,
-				.block_size = 16,
-				.key_size = {
-				   .min = 16,
-				   .max = 32,
-				   .increment = 8
-				},
-				.iv_size = {
-				   .min = 0,
-				   .max = 0,
-				   .increment = 0
-				}
-			}, }
-		}, }
-	},
-	{       /* AES CBC */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
-			{.cipher = {
-				.algo = RTE_CRYPTO_CIPHER_AES_CBC,
-				.block_size = 16,
-				.key_size = {
-					.min = 16,
-					.max = 32,
-					.increment = 8
-				},
-				.iv_size = {
-					.min = 16,
-					.max = 16,
-					.increment = 0
-				}
-			}, }
-		}, }
-	},
-	{	/* AES CTR */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
-			{.cipher = {
-				.algo = RTE_CRYPTO_CIPHER_AES_CTR,
-				.block_size = 16,
-				.key_size = {
-					.min = 16,
-					.max = 32,
-					.increment = 8
-				},
-				.iv_size = {
-					.min = 16,
-					.max = 16,
-					.increment = 0
-				}
-			}, }
-		}, }
-	},
-	{	/* 3DES CBC */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
-			{.cipher = {
-				.algo = RTE_CRYPTO_CIPHER_3DES_CBC,
-				.block_size = 8,
-				.key_size = {
-					.min = 16,
-					.max = 24,
-					.increment = 8
-				},
-				.iv_size = {
-					.min = 8,
-					.max = 8,
-					.increment = 0
-				}
-			}, }
-		}, }
-	},
-	{       /* AES GCM */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AEAD,
-			{.aead = {
-				 .algo = RTE_CRYPTO_AEAD_AES_GCM,
-				 .block_size = 16,
-				 .key_size = {
-					 .min = 16,
-					 .max = 32,
-					 .increment = 8
-				 },
-				 .digest_size = {
-					 .min = 16,
-					 .max = 16,
-					 .increment = 0
-				 },
-				 .aad_size = {
-					 .min = 0,
-					 .max = 65535,
-					 .increment = 1
-				 },
-				 .iv_size = {
-					 .min = 12,
-					 .max = 16,
-					 .increment = 4
-				 },
-			}, }
-		}, }
-	},
+#define CCP_BASE_SYM_CRYPTO_CAPABILITIES				\
+	{	/* SHA1 */						\
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,			\
+		{.sym = {						\
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,	\
+			{.auth = {					\
+				 .algo = RTE_CRYPTO_AUTH_SHA1,		\
+				 .block_size = 64,			\
+				 .key_size = {				\
+					 .min = 0,			\
+					 .max = 0,			\
+					 .increment = 0			\
+				 },					\
+				 .digest_size = {			\
+					 .min = 20,			\
+					 .max = 20,			\
+					 .increment = 0			\
+				 },					\
+				 .aad_size = { 0 }			\
+			 }, }						\
+		}, }							\
+	},								\
+	{	/* SHA1 HMAC */						\
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,			\
+		{.sym = {						\
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,	\
+			{.auth = {					\
+				 .algo = RTE_CRYPTO_AUTH_SHA1_HMAC,     \
+				 .block_size = 64,                      \
+				 .key_size = {                          \
+					 .min = 1,                      \
+					 .max = 64,                     \
+					 .increment = 1                 \
+				 },                                     \
+				 .digest_size = {                       \
+					 .min = 20,                     \
+					 .max = 20,                     \
+					 .increment = 0                 \
+				 },                                     \
+				 .aad_size = { 0 }                      \
+			 }, }                                           \
+		}, }                                                    \
+	},                                                              \
+	{	/* SHA224 */                                            \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,        \
+			{.auth = {                                      \
+				 .algo = RTE_CRYPTO_AUTH_SHA224,        \
+				 .block_size = 64,                      \
+				 .key_size = {                          \
+					 .min = 0,                      \
+					 .max = 0,			\
+					 .increment = 0                 \
+				 },                                     \
+				 .digest_size = {                       \
+					 .min = 28,                     \
+					 .max = 28,                     \
+					 .increment = 0                 \
+				 },                                     \
+				 .aad_size = { 0 }                      \
+			 }, }                                           \
+		}, }                                                    \
+	},                                                              \
+	{	/* SHA224 HMAC */                                       \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,        \
+			{.auth = {                                      \
+				 .algo = RTE_CRYPTO_AUTH_SHA224_HMAC,   \
+				 .block_size = 64,                      \
+				 .key_size = {                          \
+					 .min = 1,                      \
+					 .max = 64,                     \
+					 .increment = 1                 \
+				 },                                     \
+				 .digest_size = {                       \
+					 .min = 28,                     \
+					 .max = 28,                     \
+					 .increment = 0                 \
+				 },                                     \
+				 .aad_size = { 0 }                      \
+			 }, }                                           \
+		}, }                                                    \
+	},                                                              \
+	{	/* SHA3-224 */                                          \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,        \
+			{.auth = {                                      \
+				 .algo = RTE_CRYPTO_AUTH_SHA3_224,      \
+				 .block_size = 144,                     \
+				 .key_size = {                          \
+					 .min = 0,                      \
+					 .max = 0,                      \
+					 .increment = 0                 \
+				 },                                     \
+				 .digest_size = {                       \
+					 .min = 28,                     \
+					 .max = 28,                     \
+					 .increment = 0                 \
+				 },                                     \
+				 .aad_size = { 0 }                      \
+			 }, }                                           \
+		}, }							\
+	},                                                              \
+	{	/* SHA3-224  HMAC*/                                     \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,        \
+			{.auth = {                                      \
+				 .algo = RTE_CRYPTO_AUTH_SHA3_224_HMAC, \
+				 .block_size = 144,                     \
+				 .key_size = {                          \
+					 .min = 1,                      \
+					 .max = 144,                    \
+					 .increment = 1                 \
+				 },                                     \
+				 .digest_size = {                       \
+					 .min = 28,                     \
+					 .max = 28,                     \
+					 .increment = 0                 \
+				 },                                     \
+				 .aad_size = { 0 }                      \
+			 }, }                                           \
+		}, }                                                    \
+	},                                                              \
+	{	/* SHA256 */                                            \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,        \
+			{.auth = {                                      \
+				 .algo = RTE_CRYPTO_AUTH_SHA256,        \
+				 .block_size = 64,                      \
+				 .key_size = {                          \
+					 .min = 0,                      \
+					 .max = 0,                      \
+					 .increment = 0                 \
+				 },                                     \
+				 .digest_size = {                       \
+					 .min = 32,                     \
+					 .max = 32,                     \
+					 .increment = 0                 \
+				 },                                     \
+				 .aad_size = { 0 }                      \
+			 }, }                                           \
+		}, }                                                    \
+	},                                                              \
+	{	/* SHA256 HMAC */                                       \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,        \
+			{.auth = {                                      \
+				 .algo = RTE_CRYPTO_AUTH_SHA256_HMAC,   \
+				 .block_size = 64,                      \
+				 .key_size = {                          \
+					 .min = 1,                      \
+					 .max = 64,                     \
+					 .increment = 1                 \
+				 },                                     \
+				 .digest_size = {                       \
+					 .min = 32,                     \
+					 .max = 32,                     \
+					 .increment = 0                 \
+				 },                                     \
+				 .aad_size = { 0 }                      \
+			 }, }                                           \
+		}, }                                                    \
+	},                                                              \
+	{	/* SHA3-256 */                                          \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,        \
+			{.auth = {                                      \
+				 .algo = RTE_CRYPTO_AUTH_SHA3_256,      \
+				 .block_size = 136,                     \
+				 .key_size = {                          \
+					 .min = 0,                      \
+					 .max = 0,                      \
+					 .increment = 0                 \
+				 },                                     \
+				 .digest_size = {                       \
+					 .min = 32,                     \
+					 .max = 32,                     \
+					 .increment = 0                 \
+				 },                                     \
+				 .aad_size = { 0 }                      \
+			 }, }                                           \
+		}, }                                                    \
+	},                                                              \
+	{	/* SHA3-256-HMAC */                                     \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,        \
+			{.auth = {                                      \
+				 .algo = RTE_CRYPTO_AUTH_SHA3_256_HMAC, \
+				 .block_size = 136,                     \
+				 .key_size = {                          \
+					 .min = 1,                      \
+					 .max = 136,                    \
+					 .increment = 1                 \
+				 },                                     \
+				 .digest_size = {                       \
+					 .min = 32,                     \
+					 .max = 32,                     \
+					 .increment = 0                 \
+				 },                                     \
+				 .aad_size = { 0 }                      \
+			 }, }						\
+		}, }                                                    \
+	},                                                              \
+	{	/* SHA384 */                                            \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,        \
+			{.auth = {                                      \
+				 .algo = RTE_CRYPTO_AUTH_SHA384,        \
+				 .block_size = 128,                     \
+				 .key_size = {                          \
+					 .min = 0,                      \
+					 .max = 0,                      \
+					 .increment = 0                 \
+				 },                                     \
+				 .digest_size = {                       \
+					 .min = 48,                     \
+					 .max = 48,                     \
+					 .increment = 0                 \
+				 },                                     \
+				 .aad_size = { 0 }                      \
+			 }, }                                           \
+		}, }                                                    \
+	},                                                              \
+	{	/* SHA384 HMAC */                                       \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,        \
+			{.auth = {                                      \
+				 .algo = RTE_CRYPTO_AUTH_SHA384_HMAC,   \
+				 .block_size = 128,                     \
+				 .key_size = {                          \
+					 .min = 1,                      \
+					 .max = 128,                    \
+					 .increment = 1                 \
+				 },                                     \
+				 .digest_size = {                       \
+					 .min = 48,                     \
+					 .max = 48,                     \
+					 .increment = 0                 \
+				 },                                     \
+				 .aad_size = { 0 }                      \
+			 }, }                                           \
+		}, }                                                    \
+	},                                                              \
+	{	/* SHA3-384 */                                          \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,        \
+			{.auth = {                                      \
+				 .algo = RTE_CRYPTO_AUTH_SHA3_384,      \
+				 .block_size = 104,                     \
+				 .key_size = {                          \
+					 .min = 0,                      \
+					 .max = 0,                      \
+					 .increment = 0                 \
+				 },                                     \
+				 .digest_size = {                       \
+					 .min = 48,                     \
+					 .max = 48,                     \
+					 .increment = 0                 \
+				 },                                     \
+				 .aad_size = { 0 }                      \
+			 }, }                                           \
+		}, }                                                    \
+	},                                                              \
+	{	/* SHA3-384-HMAC */                                     \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,        \
+			{.auth = {                                      \
+				 .algo = RTE_CRYPTO_AUTH_SHA3_384_HMAC, \
+				 .block_size = 104,                     \
+				 .key_size = {                          \
+					 .min = 1,                      \
+					 .max = 104,                    \
+					 .increment = 1                 \
+				 },                                     \
+				 .digest_size = {                       \
+					 .min = 48,                     \
+					 .max = 48,                     \
+					 .increment = 0                 \
+				 },                                     \
+				 .aad_size = { 0 }                      \
+			 }, }                                           \
+		}, }                                                    \
+	},                                                              \
+	{	/* SHA512  */                                           \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,        \
+			{.auth = {                                      \
+				 .algo = RTE_CRYPTO_AUTH_SHA512,        \
+				 .block_size = 128,                     \
+				 .key_size = {                          \
+					 .min = 0,                      \
+					 .max = 0,                      \
+					 .increment = 0                 \
+				 },                                     \
+				 .digest_size = {                       \
+					 .min = 64,                     \
+					 .max = 64,                     \
+					 .increment = 0                 \
+				 },                                     \
+				 .aad_size = { 0 }			\
+			 }, }                                           \
+		}, }                                                    \
+	},                                                              \
+	{	/* SHA512 HMAC */                                       \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,        \
+			{.auth = {                                      \
+				 .algo = RTE_CRYPTO_AUTH_SHA512_HMAC,   \
+				 .block_size = 128,                     \
+				 .key_size = {                          \
+					 .min = 1,                      \
+					 .max = 128,                    \
+					 .increment = 1                 \
+				 },                                     \
+				 .digest_size = {                       \
+					 .min = 64,                     \
+					 .max = 64,                     \
+					 .increment = 0                 \
+				 },                                     \
+				 .aad_size = { 0 }                      \
+			 }, }                                           \
+		}, }                                                    \
+	},                                                              \
+	{	/* SHA3-512  */                                         \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,        \
+			{.auth = {                                      \
+				 .algo = RTE_CRYPTO_AUTH_SHA3_512,      \
+				 .block_size = 72,                      \
+				 .key_size = {                          \
+					 .min = 0,                      \
+					 .max = 0,                      \
+					 .increment = 0                 \
+				 },                                     \
+				 .digest_size = {                       \
+					 .min = 64,                     \
+					 .max = 64,                     \
+					 .increment = 0                 \
+				 },                                     \
+				 .aad_size = { 0 }                      \
+			 }, }                                           \
+		}, }                                                    \
+	},                                                              \
+	{	/* SHA3-512-HMAC  */                                    \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,        \
+			{.auth = {                                      \
+				 .algo = RTE_CRYPTO_AUTH_SHA3_512_HMAC, \
+				 .block_size = 72,                      \
+				 .key_size = {                          \
+					 .min = 1,                      \
+					 .max = 72,                     \
+					 .increment = 1                 \
+				 },                                     \
+				 .digest_size = {                       \
+					 .min = 64,                     \
+					 .max = 64,                     \
+					 .increment = 0                 \
+				 },                                     \
+				 .aad_size = { 0 }                      \
+			}, }                                            \
+		}, }                                                    \
+	},                                                              \
+	{	/*AES-CMAC */                                           \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,        \
+			{.auth = {                                      \
+				 .algo = RTE_CRYPTO_AUTH_AES_CMAC,      \
+				 .block_size = 16,                      \
+				 .key_size = {                          \
+					 .min = 16,                     \
+					 .max = 32,                     \
+					 .increment = 8                 \
+				 },                                     \
+				 .digest_size = {                       \
+					 .min = 16,                     \
+					 .max = 16,                     \
+					 .increment = 0                 \
+				 },                                     \
+			}, }                                            \
+		}, }                                                    \
+	},                                                              \
+	{       /* AES ECB */                                           \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,      \
+			{.cipher = {                                    \
+				.algo = RTE_CRYPTO_CIPHER_AES_ECB,      \
+				.block_size = 16,                       \
+				.key_size = {                           \
+				   .min = 16,                           \
+				   .max = 32,                           \
+				   .increment = 8                       \
+				},                                      \
+				.iv_size = {                            \
+				   .min = 0,                            \
+				   .max = 0,                            \
+				   .increment = 0                       \
+				}                                       \
+			}, }						\
+		}, }                                                    \
+	},                                                              \
+	{       /* AES CBC */                                           \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,      \
+			{.cipher = {                                    \
+				.algo = RTE_CRYPTO_CIPHER_AES_CBC,      \
+				.block_size = 16,                       \
+				.key_size = {                           \
+					.min = 16,                      \
+					.max = 32,                      \
+					.increment = 8                  \
+				},                                      \
+				.iv_size = {                            \
+					.min = 16,                      \
+					.max = 16,                      \
+					.increment = 0                  \
+				}                                       \
+			}, }                                            \
+		}, }                                                    \
+	},                                                              \
+	{	/* AES CTR */                                           \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,      \
+			{.cipher = {                                    \
+				.algo = RTE_CRYPTO_CIPHER_AES_CTR,      \
+				.block_size = 16,                       \
+				.key_size = {                           \
+					.min = 16,                      \
+					.max = 32,                      \
+					.increment = 8                  \
+				},                                      \
+				.iv_size = {                            \
+					.min = 16,                      \
+					.max = 16,                      \
+					.increment = 0                  \
+				}                                       \
+			}, }                                            \
+		}, }                                                    \
+	},                                                              \
+	{	/* 3DES CBC */                                          \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,      \
+			{.cipher = {                                    \
+				.algo = RTE_CRYPTO_CIPHER_3DES_CBC,     \
+				.block_size = 8,                        \
+				.key_size = {                           \
+					.min = 16,                      \
+					.max = 24,                      \
+					.increment = 8                  \
+				},                                      \
+				.iv_size = {                            \
+					.min = 8,                       \
+					.max = 8,                       \
+					.increment = 0                  \
+				}                                       \
+			}, }                                            \
+		}, }                                                    \
+	},                                                              \
+	{       /* AES GCM */                                           \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AEAD,        \
+			{.aead = {                                      \
+				 .algo = RTE_CRYPTO_AEAD_AES_GCM,       \
+				 .block_size = 16,                      \
+				 .key_size = {                          \
+					 .min = 16,                     \
+					 .max = 32,                     \
+					 .increment = 8                 \
+				 },                                     \
+				 .digest_size = {                       \
+					 .min = 16,                     \
+					 .max = 16,                     \
+					 .increment = 0                 \
+				 },                                     \
+				 .aad_size = {                          \
+					 .min = 0,                      \
+					 .max = 65535,                  \
+					 .increment = 1                 \
+				 },                                     \
+				 .iv_size = {                           \
+					 .min = 12,                     \
+					 .max = 16,                     \
+					 .increment = 4                 \
+				 },                                     \
+			}, }                                            \
+		}, }                                                    \
+	}
+
+#define CCP_EXTRA_SYM_CRYPTO_CAPABILITIES				\
+	{	/* MD5 HMAC */						\
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,			\
+		{.sym = {						\
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,	\
+			{.auth = {					\
+				 .algo = RTE_CRYPTO_AUTH_MD5_HMAC,	\
+				 .block_size = 64,			\
+				 .key_size = {				\
+					 .min = 1,			\
+					 .max = 64,			\
+					 .increment = 1			\
+				 },					\
+				 .digest_size = {			\
+					 .min = 16,			\
+					 .max = 16,			\
+					 .increment = 0			\
+				 },					\
+				 .aad_size = { 0 }			\
+			}, }						\
+		}, }							\
+	}
+
+static const struct rte_cryptodev_capabilities ccp_crypto_cap[] = {
+	CCP_BASE_SYM_CRYPTO_CAPABILITIES,
+	RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST()
+};
+
+static const struct rte_cryptodev_capabilities ccp_crypto_cap_complete[] = {
+	CCP_EXTRA_SYM_CRYPTO_CAPABILITIES,
+	CCP_BASE_SYM_CRYPTO_CAPABILITIES,
 	RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST()
 };
 
@@ -611,7 +620,9 @@ ccp_pmd_info_get(struct rte_cryptodev *dev,
 	if (dev_info != NULL) {
 		dev_info->driver_id = dev->driver_id;
 		dev_info->feature_flags = dev->feature_flags;
-		dev_info->capabilities = ccp_pmd_capabilities;
+		dev_info->capabilities = ccp_crypto_cap;
+		if (internals->auth_opt == 1)
+			dev_info->capabilities = ccp_crypto_cap_complete;
 		dev_info->max_nb_queue_pairs = internals->max_nb_qpairs;
 		dev_info->sym.max_nb_sessions = internals->max_nb_sessions;
 	}
@@ -770,6 +781,7 @@ ccp_pmd_session_configure(struct rte_cryptodev *dev,
 {
 	int ret;
 	void *sess_private_data;
+	struct ccp_private *internals;
 
 	if (unlikely(sess == NULL || xform == NULL)) {
 		CCP_LOG_ERR("Invalid session struct or xform");
@@ -780,7 +792,8 @@ ccp_pmd_session_configure(struct rte_cryptodev *dev,
 		CCP_LOG_ERR("Couldn't get object from session mempool");
 		return -ENOMEM;
 	}
-	ret = ccp_set_session_parameters(sess_private_data, xform);
+	internals = (struct ccp_private *)dev->data->dev_private;
+	ret = ccp_set_session_parameters(sess_private_data, xform, internals);
 	if (ret != 0) {
 		CCP_LOG_ERR("failed configure session parameters");
 
diff --git a/drivers/crypto/ccp/ccp_pmd_private.h b/drivers/crypto/ccp/ccp_pmd_private.h
index 560bed9..71677ee 100644
--- a/drivers/crypto/ccp/ccp_pmd_private.h
+++ b/drivers/crypto/ccp/ccp_pmd_private.h
@@ -42,6 +42,8 @@ struct ccp_private {
 	unsigned int max_nb_qpairs;	/**< Max number of queue pairs */
 	unsigned int max_nb_sessions;	/**< Max number of sessions */
 	uint8_t crypto_num_dev;		/**< Number of working crypto devices */
+	bool auth_opt;			/**< Authentication offload option */
+	int die_num;			/**< Combine CCP devices of this die */
 	struct ccp_device *last_dev;	/**< Last working crypto device */
 };
 
@@ -62,10 +64,8 @@ struct ccp_batch_info {
 	phys_addr_t lsb_buf_phys;
 	/**< LSB intermediate buf for passthru */
 	int lsb_buf_idx;
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
 	uint16_t auth_ctr;
-	/**< auth only ops batch */
-#endif
+	/**< auth only ops batch for CPU based auth */
 } __rte_cache_aligned;
 
 /**< CCP crypto queue pair */
diff --git a/drivers/crypto/ccp/rte_ccp_pmd.c b/drivers/crypto/ccp/rte_ccp_pmd.c
index d3553db..4861137 100644
--- a/drivers/crypto/ccp/rte_ccp_pmd.c
+++ b/drivers/crypto/ccp/rte_ccp_pmd.c
@@ -22,6 +22,173 @@
 static unsigned int ccp_pmd_init_done;
 uint8_t ccp_cryptodev_driver_id;
 
+struct ccp_pmd_init_params {
+	struct rte_cryptodev_pmd_init_params def_p;
+	bool auth_opt;
+	int die_num;
+};
+
+#define CCP_CRYPTODEV_PARAM_NAME		("name")
+#define CCP_CRYPTODEV_PARAM_SOCKET_ID		("socket_id")
+#define CCP_CRYPTODEV_PARAM_MAX_NB_QP		("max_nb_queue_pairs")
+#define CCP_CRYPTODEV_PARAM_MAX_NB_SESS		("max_nb_sessions")
+#define CCP_CRYPTODEV_PARAM_AUTH_OPT		("ccp_auth_opt")
+#define CCP_CRYPTODEV_PARAM_DIE_NUM		("die_num")
+
+const char *ccp_pmd_valid_params[] = {
+	CCP_CRYPTODEV_PARAM_NAME,
+	CCP_CRYPTODEV_PARAM_SOCKET_ID,
+	CCP_CRYPTODEV_PARAM_MAX_NB_QP,
+	CCP_CRYPTODEV_PARAM_MAX_NB_SESS,
+	CCP_CRYPTODEV_PARAM_AUTH_OPT,
+	CCP_CRYPTODEV_PARAM_DIE_NUM,
+};
+
+/** ccp pmd auth option */
+enum ccp_pmd_auth_opt {
+	CCP_PMD_AUTH_OPT_CCP = 0,
+	CCP_PMD_AUTH_OPT_CPU,
+};
+
+/** parse integer from integer argument */
+static int
+parse_integer_arg(const char *key __rte_unused,
+		  const char *value, void *extra_args)
+{
+	int *i = (int *) extra_args;
+
+	*i = atoi(value);
+	if (*i < 0) {
+		CCP_LOG_ERR("Argument has to be positive.\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/** parse name argument */
+static int
+parse_name_arg(const char *key __rte_unused,
+	       const char *value, void *extra_args)
+{
+	struct rte_cryptodev_pmd_init_params *params = extra_args;
+
+	if (strlen(value) >= RTE_CRYPTODEV_NAME_MAX_LEN - 1) {
+		CCP_LOG_ERR("Invalid name %s, should be less than "
+			    "%u bytes.\n", value,
+			    RTE_CRYPTODEV_NAME_MAX_LEN - 1);
+		return -EINVAL;
+	}
+
+	strncpy(params->name, value, RTE_CRYPTODEV_NAME_MAX_LEN);
+
+	return 0;
+}
+
+/** parse authentication operation option */
+static int
+parse_auth_opt_arg(const char *key __rte_unused,
+		   const char *value, void *extra_args)
+{
+	struct ccp_pmd_init_params *params = extra_args;
+	int i;
+
+	i = atoi(value);
+	if (i < CCP_PMD_AUTH_OPT_CCP || i > CCP_PMD_AUTH_OPT_CPU) {
+		CCP_LOG_ERR("Invalid ccp pmd auth option. "
+			    "0->auth on CCP(default), "
+			    "1->auth on CPU\n");
+		return -EINVAL;
+	}
+	params->auth_opt = i;
+	return 0;
+}
+
+/* Maximum 4-die platform (0-3) supported */
+#define CCP_PLATFORM_MAX_DIE_NUM 3
+
+/** parse die number argument */
+static int
+parse_die_num_arg(const char *key __rte_unused,
+		  const char *value, void *extra_args)
+{
+	struct ccp_pmd_init_params *params = extra_args;
+	int *i = (int *)&params->die_num;
+
+	*i = atoi(value);
+	if (*i < 0 || *i > CCP_PLATFORM_MAX_DIE_NUM) {
+		CCP_LOG_ERR("Invalid platform die number. "
+			    "Must be in the range 0-%d\n",
+			    CCP_PLATFORM_MAX_DIE_NUM);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int
+ccp_pmd_parse_input_args(struct ccp_pmd_init_params *params,
+			 const char *input_args)
+{
+	struct rte_kvargs *kvlist = NULL;
+	int ret = 0;
+
+	if (params == NULL)
+		return -EINVAL;
+
+	if (input_args) {
+		kvlist = rte_kvargs_parse(input_args,
+					  ccp_pmd_valid_params);
+		if (kvlist == NULL)
+			return -1;
+
+		ret = rte_kvargs_process(kvlist,
+					 CCP_CRYPTODEV_PARAM_MAX_NB_QP,
+					 &parse_integer_arg,
+					 &params->def_p.max_nb_queue_pairs);
+		if (ret < 0)
+			goto free_kvlist;
+
+		ret = rte_kvargs_process(kvlist,
+					 CCP_CRYPTODEV_PARAM_MAX_NB_SESS,
+					 &parse_integer_arg,
+					 &params->def_p.max_nb_sessions);
+		if (ret < 0)
+			goto free_kvlist;
+
+		ret = rte_kvargs_process(kvlist,
+					 CCP_CRYPTODEV_PARAM_SOCKET_ID,
+					 &parse_integer_arg,
+					 &params->def_p.socket_id);
+		if (ret < 0)
+			goto free_kvlist;
+
+		ret = rte_kvargs_process(kvlist,
+					 CCP_CRYPTODEV_PARAM_NAME,
+					 &parse_name_arg,
+					 &params->def_p);
+		if (ret < 0)
+			goto free_kvlist;
+
+		ret = rte_kvargs_process(kvlist,
+					 CCP_CRYPTODEV_PARAM_AUTH_OPT,
+					 &parse_auth_opt_arg,
+					 params);
+		if (ret < 0)
+			goto free_kvlist;
+
+		ret = rte_kvargs_process(kvlist,
+					 CCP_CRYPTODEV_PARAM_DIE_NUM,
+					 &parse_die_num_arg,
+					 params);
+		if (ret < 0)
+			goto free_kvlist;
+	}
+
+free_kvlist:
+	rte_kvargs_free(kvlist);
+	return ret;
+}
+
 static struct ccp_session *
 get_ccp_session(struct ccp_qp *qp, struct rte_crypto_op *op)
 {
@@ -38,6 +205,7 @@ get_ccp_session(struct ccp_qp *qp, struct rte_crypto_op *op)
 	} else if (op->sess_type == RTE_CRYPTO_OP_SESSIONLESS) {
 		void *_sess;
 		void *_sess_private_data = NULL;
+		struct ccp_private *internals;
 
 		if (rte_mempool_get(qp->sess_mp, &_sess))
 			return NULL;
@@ -46,8 +214,9 @@ get_ccp_session(struct ccp_qp *qp, struct rte_crypto_op *op)
 
 		sess = (struct ccp_session *)_sess_private_data;
 
-		if (unlikely(ccp_set_session_parameters(sess,
-							op->sym->xform) != 0)) {
+		internals = (struct ccp_private *)qp->dev->data->dev_private;
+		if (unlikely(ccp_set_session_parameters(sess, op->sym->xform,
+							internals) != 0)) {
 			rte_mempool_put(qp->sess_mp, _sess);
 			rte_mempool_put(qp->sess_mp, _sess_private_data);
 			sess = NULL;
@@ -154,19 +323,20 @@ cryptodev_ccp_remove(struct rte_vdev_device *dev)
 static int
 cryptodev_ccp_create(const char *name,
 		     struct rte_vdev_device *vdev,
-		     struct rte_cryptodev_pmd_init_params *init_params)
+		     struct ccp_pmd_init_params *init_params)
 {
 	struct rte_cryptodev *dev;
 	struct ccp_private *internals;
 	uint8_t cryptodev_cnt = 0;
 
-	if (init_params->name[0] == '\0')
-		snprintf(init_params->name, sizeof(init_params->name),
-				"%s", name);
+	if (init_params->def_p.name[0] == '\0')
+		snprintf(init_params->def_p.name,
+			 sizeof(init_params->def_p.name),
+			 "%s", name);
 
-	dev = rte_cryptodev_pmd_create(init_params->name,
+	dev = rte_cryptodev_pmd_create(init_params->def_p.name,
 				       &vdev->device,
-				       init_params);
+				       &init_params->def_p);
 	if (dev == NULL) {
 		CCP_LOG_ERR("failed to create cryptodev vdev");
 		goto init_error;
@@ -193,15 +363,17 @@ cryptodev_ccp_create(const char *name,
 
 	internals = dev->data->dev_private;
 
-	internals->max_nb_qpairs = init_params->max_nb_queue_pairs;
-	internals->max_nb_sessions = init_params->max_nb_sessions;
+	internals->max_nb_qpairs = init_params->def_p.max_nb_queue_pairs;
+	internals->max_nb_sessions = init_params->def_p.max_nb_sessions;
+	internals->auth_opt = init_params->auth_opt;
+	internals->die_num = init_params->die_num;
 	internals->crypto_num_dev = cryptodev_cnt;
 
 	return 0;
 
 init_error:
 	CCP_LOG_ERR("driver %s: %s() failed",
-		    init_params->name, __func__);
+		    init_params->def_p.name, __func__);
 	cryptodev_ccp_remove(vdev);
 
 	return -EFAULT;
@@ -213,12 +385,17 @@ cryptodev_ccp_probe(struct rte_vdev_device *vdev)
 {
 	int rc = 0;
 	const char *name;
-	struct rte_cryptodev_pmd_init_params init_params = {
-		"",
-		sizeof(struct ccp_private),
-		rte_socket_id(),
-		CCP_PMD_MAX_QUEUE_PAIRS,
-		RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_SESSIONS
+	char die_num[20] = {0};
+	struct ccp_pmd_init_params init_params = {
+		.def_p = {
+			"",
+			sizeof(struct ccp_private),
+			rte_socket_id(),
+			CCP_PMD_MAX_QUEUE_PAIRS,
+			RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_SESSIONS
+		},
+		.auth_opt = CCP_PMD_AUTH_OPT_CCP,
+		.die_num = -1, /* by default use all CCP underneath */
 	};
 	const char *input_args;
 
@@ -231,15 +408,20 @@ cryptodev_ccp_probe(struct rte_vdev_device *vdev)
 		return -EINVAL;
 
 	input_args = rte_vdev_device_args(vdev);
-	rte_cryptodev_pmd_parse_input_args(&init_params, input_args);
-	init_params.max_nb_queue_pairs = CCP_PMD_MAX_QUEUE_PAIRS;
+	ccp_pmd_parse_input_args(&init_params, input_args);
+	init_params.def_p.max_nb_queue_pairs = CCP_PMD_MAX_QUEUE_PAIRS;
 
 	RTE_LOG(INFO, PMD, "Initialising %s on NUMA node %d\n", name,
-			init_params.socket_id);
+		init_params.def_p.socket_id);
 	RTE_LOG(INFO, PMD, "Max number of queue pairs = %d\n",
-			init_params.max_nb_queue_pairs);
+		init_params.def_p.max_nb_queue_pairs);
 	RTE_LOG(INFO, PMD, "Max number of sessions = %d\n",
-			init_params.max_nb_sessions);
+		init_params.def_p.max_nb_sessions);
+	RTE_LOG(INFO, PMD, "Authentication offload to %s\n",
+		((init_params.auth_opt == 0) ? "CCP" : "CPU"));
+	snprintf(die_num, 20, "die_num-%d", init_params.die_num);
+	RTE_LOG(INFO, PMD, "Combining %s CCP devices\n",
+		((init_params.die_num == -1) ? "all" : die_num));
 
 	rc = cryptodev_ccp_create(name, vdev, &init_params);
 	if (rc)
@@ -257,6 +439,9 @@ static struct cryptodev_driver ccp_crypto_drv;
 
 RTE_PMD_REGISTER_VDEV(CRYPTODEV_NAME_CCP_PMD, cryptodev_ccp_pmd_drv);
 RTE_PMD_REGISTER_PARAM_STRING(CRYPTODEV_NAME_CCP_PMD,
-	"max_nb_queue_pairs=<int> max_nb_sessions=<int> socket_id=<int>");
+	"max_nb_queue_pairs=<int> "
+	"max_nb_sessions=<int> "
+	"socket_id=<int> "
+	"ccp_auth_opt=<int>");
 RTE_PMD_REGISTER_CRYPTO_DRIVER(ccp_crypto_drv, cryptodev_ccp_pmd_drv.driver,
 			       ccp_cryptodev_driver_id);
-- 
2.7.4

Re: [dpdk-dev] [PATCH v2] crypto/ccp: support command line option to enable CPU based auth

[De Lara Guarch, Pablo]

Hi Ravi,

> -----Original Message-----
> From: Ravi Kumar [mailto:Ravi1.kumar@amd.com]
> Sent: Wednesday, May 9, 2018 1:46 PM
> To: dev@dpdk.org
> Cc: De Lara Guarch, Pablo <pablo.de.lara.guarch@intel.com>;
> thomas@monjalon.net; hemant.agrawal@nxp.com
> Subject: [PATCH v2] crypto/ccp: support command line option to enable CPU
> based auth
> 
> CCP PMD supports authentication offload to either of CCP or CPU.
> The earlier version of patch provides this option as compile time.
> This patch changes this option from compile time to run time.
> User can pass "ccp_auth_opt=1" as an additional arguments to vdev
> parameter to enable authentication operations on CPU.
> 
> Signed-off-by: Ravi Kumar <Ravi1.kumar@amd.com>

...

>  RTE_PMD_REGISTER_VDEV(CRYPTODEV_NAME_CCP_PMD,
> cryptodev_ccp_pmd_drv);
>  RTE_PMD_REGISTER_PARAM_STRING(CRYPTODEV_NAME_CCP_PMD,
> -	"max_nb_queue_pairs=<int> max_nb_sessions=<int> socket_id=<int>");
> +	"max_nb_queue_pairs=<int> "
> +	"max_nb_sessions=<int> "
> +	"socket_id=<int> "
> +	"ccp_auth_opt=<int>");


Die_num is not in this list. I was going to add it myself,
but then I realized that it is not actually used anywhere.
Am I missing something?

Also, I think it is worth updating the documentation of the PMD with these parameters.

Thanks,
Pablo

Re: [dpdk-dev] [PATCH v2] crypto/ccp: support command line option to enable CPU based auth

[Kumar, Ravi1]

>Hi Ravi,
>
>> -----Original Message-----
>> From: Ravi Kumar [mailto:Ravi1.kumar@amd.com]
>> Sent: Wednesday, May 9, 2018 1:46 PM
>> To: dev@dpdk.org
>> Cc: De Lara Guarch, Pablo <pablo.de.lara.guarch@intel.com>; 
>> thomas@monjalon.net; hemant.agrawal@nxp.com
>> Subject: [PATCH v2] crypto/ccp: support command line option to enable 
>> CPU based auth
>> 
>> CCP PMD supports authentication offload to either of CCP or CPU.
>> The earlier version of patch provides this option as compile time.
>> This patch changes this option from compile time to run time.
>> User can pass "ccp_auth_opt=1" as an additional arguments to vdev 
>> parameter to enable authentication operations on CPU.
>> 
>> Signed-off-by: Ravi Kumar <Ravi1.kumar@amd.com>
>
>...
>
>>  RTE_PMD_REGISTER_VDEV(CRYPTODEV_NAME_CCP_PMD,
>> cryptodev_ccp_pmd_drv);
>>  RTE_PMD_REGISTER_PARAM_STRING(CRYPTODEV_NAME_CCP_PMD,
>> -	"max_nb_queue_pairs=<int> max_nb_sessions=<int> socket_id=<int>");
>> +	"max_nb_queue_pairs=<int> "
>> +	"max_nb_sessions=<int> "
>> +	"socket_id=<int> "
>> +	"ccp_auth_opt=<int>");
>
>
>Die_num is not in this list. I was going to add it myself, but then I realized that it is not actually used anywhere.
>Am I missing something?
>
>Also, I think it is worth updating the documentation of the PMD with these parameters.
>
>Thanks,
>Pablo
>
Hi Pablo,

Die-num parameter is going to be used in future. Will remove for now and send an updated patch.

Thanks,
Ravi

Re: [dpdk-dev] [PATCH v2] crypto/ccp: support command line option to enable CPU based auth

[De Lara Guarch, Pablo]

> -----Original Message-----
> From: Kumar, Ravi1 [mailto:Ravi1.Kumar@amd.com]
> Sent: Thursday, May 10, 2018 9:43 AM
> To: De Lara Guarch, Pablo <pablo.de.lara.guarch@intel.com>; dev@dpdk.org
> Cc: thomas@monjalon.net; hemant.agrawal@nxp.com
> Subject: RE: [PATCH v2] crypto/ccp: support command line option to enable CPU
> based auth
> 
> >Hi Ravi,
> >
> >> -----Original Message-----
> >> From: Ravi Kumar [mailto:Ravi1.kumar@amd.com]
> >> Sent: Wednesday, May 9, 2018 1:46 PM
> >> To: dev@dpdk.org
> >> Cc: De Lara Guarch, Pablo <pablo.de.lara.guarch@intel.com>;
> >> thomas@monjalon.net; hemant.agrawal@nxp.com
> >> Subject: [PATCH v2] crypto/ccp: support command line option to enable
> >> CPU based auth
> >>
> >> CCP PMD supports authentication offload to either of CCP or CPU.
> >> The earlier version of patch provides this option as compile time.
> >> This patch changes this option from compile time to run time.
> >> User can pass "ccp_auth_opt=1" as an additional arguments to vdev
> >> parameter to enable authentication operations on CPU.
> >>
> >> Signed-off-by: Ravi Kumar <Ravi1.kumar@amd.com>
> >
> >...
> >
> >>  RTE_PMD_REGISTER_VDEV(CRYPTODEV_NAME_CCP_PMD,
> >> cryptodev_ccp_pmd_drv);
> >>  RTE_PMD_REGISTER_PARAM_STRING(CRYPTODEV_NAME_CCP_PMD,
> >> -	"max_nb_queue_pairs=<int> max_nb_sessions=<int> socket_id=<int>");
> >> +	"max_nb_queue_pairs=<int> "
> >> +	"max_nb_sessions=<int> "
> >> +	"socket_id=<int> "
> >> +	"ccp_auth_opt=<int>");
> >
> >
> >Die_num is not in this list. I was going to add it myself, but then I realized that it
> is not actually used anywhere.
> >Am I missing something?
> >
> >Also, I think it is worth updating the documentation of the PMD with these
> parameters.
> >
> >Thanks,
> >Pablo
> >
> Hi Pablo,
> 
> Die-num parameter is going to be used in future. Will remove for now and send
> an updated patch.

Thanks Ravi!

Pablo

> 
> Thanks,
> Ravi

[dpdk-dev] [PATCH v3] crypto/ccp: support command line option to enable CPU based auth

[Ravi Kumar]

CCP PMD supports authentication offload to either of CCP or CPU.
The earlier version of patch provides this option as compile time.
This patch changes this option from compile time to run time.
User can pass "ccp_auth_opt=1" as an additional arguments to vdev
parameter to enable authentication operations on CPU.

Signed-off-by: Ravi Kumar <Ravi1.kumar@amd.com>
---
 config/common_base                   |    1 -
 doc/guides/cryptodevs/ccp.rst        |   54 +-
 drivers/crypto/ccp/ccp_crypto.c      |  413 +++++++------
 drivers/crypto/ccp/ccp_crypto.h      |   10 +-
 drivers/crypto/ccp/ccp_pmd_ops.c     | 1081 +++++++++++++++++-----------------
 drivers/crypto/ccp/ccp_pmd_private.h |    5 +-
 drivers/crypto/ccp/rte_ccp_pmd.c     |  195 +++++-
 7 files changed, 973 insertions(+), 786 deletions(-)

diff --git a/config/common_base b/config/common_base
index 0d181ac..66f157f 100644
--- a/config/common_base
+++ b/config/common_base
@@ -556,7 +556,6 @@ CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
 # Compile PMD for AMD CCP crypto device
 #
 CONFIG_RTE_LIBRTE_PMD_CCP=n
-CONFIG_RTE_LIBRTE_PMD_CCP_CPU_AUTH=n
 
 #
 # Compile PMD for Marvell Crypto device
diff --git a/doc/guides/cryptodevs/ccp.rst b/doc/guides/cryptodevs/ccp.rst
index 1fcd462..034d203 100644
--- a/doc/guides/cryptodevs/ccp.rst
+++ b/doc/guides/cryptodevs/ccp.rst
@@ -56,12 +56,16 @@ AEAD algorithms:
 Installation
 ------------
 
-To compile CCP PMD, it has to be enabled in the config/common_base file.
+To compile ccp PMD, it has to be enabled in the config/common_base file and openssl
+packages have to be installed in the build environment.
+
 * ``CONFIG_RTE_LIBRTE_PMD_CCP=y``
 
-The CCP PMD also supports computing authentication over CPU with cipher offloaded
-to CCP. To enable this feature, enable following in the configuration.
-* ``CONFIG_RTE_LIBRTE_PMD_CCP_CPU_AUTH=y``
+For Ubuntu 16.04 LTS use below to install openssl in the build system:
+
+.. code-block:: console
+
+	sudo apt-get install openssl
 
 This code was verified on Ubuntu 16.04.
 
@@ -77,12 +81,31 @@ e.g. for the 0x1456 device::
 	echo "1022 1456" > /sys/bus/pci/drivers/igb_uio/new_id
 
 Another way to bind the CCP devices to DPDK UIO driver is by using the ``dpdk-devbind.py`` script.
-The following command assumes ``BFD`` of ``0000:09:00.2``::
+The following command assumes ``BFD`` as ``0000:09:00.2``::
 
 	cd to the top-level DPDK directory
 	./usertools/dpdk-devbind.py -b igb_uio 0000:09:00.2
 
-To verify real traffic l2fwd-crypto example can be used with following command:
+In order to enable the ccp crypto PMD, user must set CONFIG_RTE_LIBRTE_PMD_CCP=y in config/common_base.
+
+To use the PMD in an application, user must:
+
+* Call rte_vdev_init("crypto_ccp") within the application.
+
+* Use --vdev="crypto_ccp" in the EAL options, which will call rte_vdev_init() internally.
+
+The following parameters (all optional) can be provided in the previous two calls:
+
+* socket_id: Specify the socket where the memory for the device is going to be allocated.
+  (by default, socket_id will be the socket where the core that is creating the PMD is running on).
+
+* max_nb_queue_pairs: Specify the maximum number of queue pairs in the device.
+
+* max_nb_sessions: Specify the maximum number of sessions that can be created (2048 by default).
+
+* ccp_auth_opt: Specify authentication operations to perform on CPU using openssl APIs.
+
+To validate ccp pmd, l2fwd-crypto example can be used with following command:
 
 .. code-block:: console
 
@@ -95,8 +118,23 @@ To verify real traffic l2fwd-crypto example can be used with following command:
 	:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11
 	:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11
 
+The CCP PMD also supports computing authentication over CPU with cipher offloaded to CCP.
+To enable this feature, pass an additional argument as ccp_auth_opt=1 to --vdev parameters as
+following:
+
+.. code-block:: console
+
+	sudo ./build/l2fwd-crypto -l 1 -n 4 --vdev "crypto_ccp,ccp_auth_opt=1" -- -p 0x1
+	--chain CIPHER_HASH --cipher_op ENCRYPT --cipher_algo AES_CBC
+	--cipher_key 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:0f
+	--iv 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:ff
+	--auth_op GENERATE --auth_algo SHA1_HMAC
+	--auth_key 11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11
+	:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11
+	:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11
+
 Limitations
 -----------
 
-* Chained mbufs are not supported
-* MD5_HMAC is supported only if ``CONFIG_RTE_LIBRTE_PMD_CCP_CPU_AUTH=y`` is enabled in configuration
+* Chained mbufs are not supported.
+* MD5_HMAC is supported only for CPU based authentication.
diff --git a/drivers/crypto/ccp/ccp_crypto.c b/drivers/crypto/ccp/ccp_crypto.c
index a0809e4..3ce0f39 100644
--- a/drivers/crypto/ccp/ccp_crypto.c
+++ b/drivers/crypto/ccp/ccp_crypto.c
@@ -27,11 +27,9 @@
 #include "ccp_pci.h"
 #include "ccp_pmd_private.h"
 
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
 #include <openssl/conf.h>
 #include <openssl/err.h>
 #include <openssl/hmac.h>
-#endif
 
 /* SHA initial context values */
 static uint32_t ccp_sha1_init[SHA_COMMON_DIGEST_SIZE / sizeof(uint32_t)] = {
@@ -766,17 +764,19 @@ ccp_configure_session_auth(struct ccp_session *sess,
 	else
 		sess->auth.op = CCP_AUTH_OP_VERIFY;
 	switch (auth_xform->algo) {
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
 	case RTE_CRYPTO_AUTH_MD5_HMAC:
-		sess->auth.algo = CCP_AUTH_ALGO_MD5_HMAC;
-		sess->auth.offset = (CCP_SB_BYTES << 1) - MD5_DIGEST_SIZE;
-		sess->auth.key_length = auth_xform->key.length;
-		sess->auth.block_size = MD5_BLOCK_SIZE;
-		memset(sess->auth.key, 0, sess->auth.block_size);
-		rte_memcpy(sess->auth.key, auth_xform->key.data,
-			   auth_xform->key.length);
+		if (sess->auth_opt) {
+			sess->auth.algo = CCP_AUTH_ALGO_MD5_HMAC;
+			sess->auth.offset = ((CCP_SB_BYTES << 1) -
+					     MD5_DIGEST_SIZE);
+			sess->auth.key_length = auth_xform->key.length;
+			sess->auth.block_size = MD5_BLOCK_SIZE;
+			memset(sess->auth.key, 0, sess->auth.block_size);
+			rte_memcpy(sess->auth.key, auth_xform->key.data,
+				   auth_xform->key.length);
+		} else
+			return -1; /* HMAC MD5 not supported on CCP */
 		break;
-#endif
 	case RTE_CRYPTO_AUTH_SHA1:
 		sess->auth.engine = CCP_ENGINE_SHA;
 		sess->auth.algo = CCP_AUTH_ALGO_SHA1;
@@ -786,33 +786,34 @@ ccp_configure_session_auth(struct ccp_session *sess,
 		sess->auth.offset = CCP_SB_BYTES - SHA1_DIGEST_SIZE;
 		break;
 	case RTE_CRYPTO_AUTH_SHA1_HMAC:
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-		if (auth_xform->key.length > SHA1_BLOCK_SIZE)
-			return -1;
-		sess->auth.algo = CCP_AUTH_ALGO_SHA1_HMAC;
-		sess->auth.offset = CCP_SB_BYTES - SHA1_DIGEST_SIZE;
-		sess->auth.block_size = SHA1_BLOCK_SIZE;
-		sess->auth.key_length = auth_xform->key.length;
-		memset(sess->auth.key, 0, sess->auth.block_size);
-		rte_memcpy(sess->auth.key, auth_xform->key.data,
-			   auth_xform->key.length);
-#else
-		if (auth_xform->key.length > SHA1_BLOCK_SIZE)
-			return -1;
-		sess->auth.engine = CCP_ENGINE_SHA;
-		sess->auth.algo = CCP_AUTH_ALGO_SHA1_HMAC;
-		sess->auth.ut.sha_type = CCP_SHA_TYPE_1;
-		sess->auth.ctx_len = CCP_SB_BYTES;
-		sess->auth.offset = CCP_SB_BYTES - SHA1_DIGEST_SIZE;
-		sess->auth.block_size = SHA1_BLOCK_SIZE;
-		sess->auth.key_length = auth_xform->key.length;
-		memset(sess->auth.key, 0, sess->auth.block_size);
-		memset(sess->auth.pre_compute, 0, sess->auth.ctx_len << 1);
-		rte_memcpy(sess->auth.key, auth_xform->key.data,
-			   auth_xform->key.length);
-		if (generate_partial_hash(sess))
-			return -1;
-#endif
+		if (sess->auth_opt) {
+			if (auth_xform->key.length > SHA1_BLOCK_SIZE)
+				return -1;
+			sess->auth.algo = CCP_AUTH_ALGO_SHA1_HMAC;
+			sess->auth.offset = CCP_SB_BYTES - SHA1_DIGEST_SIZE;
+			sess->auth.block_size = SHA1_BLOCK_SIZE;
+			sess->auth.key_length = auth_xform->key.length;
+			memset(sess->auth.key, 0, sess->auth.block_size);
+			rte_memcpy(sess->auth.key, auth_xform->key.data,
+				   auth_xform->key.length);
+		} else {
+			if (auth_xform->key.length > SHA1_BLOCK_SIZE)
+				return -1;
+			sess->auth.engine = CCP_ENGINE_SHA;
+			sess->auth.algo = CCP_AUTH_ALGO_SHA1_HMAC;
+			sess->auth.ut.sha_type = CCP_SHA_TYPE_1;
+			sess->auth.ctx_len = CCP_SB_BYTES;
+			sess->auth.offset = CCP_SB_BYTES - SHA1_DIGEST_SIZE;
+			sess->auth.block_size = SHA1_BLOCK_SIZE;
+			sess->auth.key_length = auth_xform->key.length;
+			memset(sess->auth.key, 0, sess->auth.block_size);
+			memset(sess->auth.pre_compute, 0,
+			       sess->auth.ctx_len << 1);
+			rte_memcpy(sess->auth.key, auth_xform->key.data,
+				   auth_xform->key.length);
+			if (generate_partial_hash(sess))
+				return -1;
+		}
 		break;
 	case RTE_CRYPTO_AUTH_SHA224:
 		sess->auth.algo = CCP_AUTH_ALGO_SHA224;
@@ -823,33 +824,34 @@ ccp_configure_session_auth(struct ccp_session *sess,
 		sess->auth.offset = CCP_SB_BYTES - SHA224_DIGEST_SIZE;
 		break;
 	case RTE_CRYPTO_AUTH_SHA224_HMAC:
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-		if (auth_xform->key.length > SHA224_BLOCK_SIZE)
-			return -1;
-		sess->auth.algo = CCP_AUTH_ALGO_SHA224_HMAC;
-		sess->auth.offset = CCP_SB_BYTES - SHA224_DIGEST_SIZE;
-		sess->auth.block_size = SHA224_BLOCK_SIZE;
-		sess->auth.key_length = auth_xform->key.length;
-		memset(sess->auth.key, 0, sess->auth.block_size);
-		rte_memcpy(sess->auth.key, auth_xform->key.data,
-			   auth_xform->key.length);
-#else
-		if (auth_xform->key.length > SHA224_BLOCK_SIZE)
-			return -1;
-		sess->auth.algo = CCP_AUTH_ALGO_SHA224_HMAC;
-		sess->auth.engine = CCP_ENGINE_SHA;
-		sess->auth.ut.sha_type = CCP_SHA_TYPE_224;
-		sess->auth.ctx_len = CCP_SB_BYTES;
-		sess->auth.offset = CCP_SB_BYTES - SHA224_DIGEST_SIZE;
-		sess->auth.block_size = SHA224_BLOCK_SIZE;
-		sess->auth.key_length = auth_xform->key.length;
-		memset(sess->auth.key, 0, sess->auth.block_size);
-		memset(sess->auth.pre_compute, 0, sess->auth.ctx_len << 1);
-		rte_memcpy(sess->auth.key, auth_xform->key.data,
-			   auth_xform->key.length);
-		if (generate_partial_hash(sess))
-			return -1;
-#endif
+		if (sess->auth_opt) {
+			if (auth_xform->key.length > SHA224_BLOCK_SIZE)
+				return -1;
+			sess->auth.algo = CCP_AUTH_ALGO_SHA224_HMAC;
+			sess->auth.offset = CCP_SB_BYTES - SHA224_DIGEST_SIZE;
+			sess->auth.block_size = SHA224_BLOCK_SIZE;
+			sess->auth.key_length = auth_xform->key.length;
+			memset(sess->auth.key, 0, sess->auth.block_size);
+			rte_memcpy(sess->auth.key, auth_xform->key.data,
+				   auth_xform->key.length);
+		} else {
+			if (auth_xform->key.length > SHA224_BLOCK_SIZE)
+				return -1;
+			sess->auth.algo = CCP_AUTH_ALGO_SHA224_HMAC;
+			sess->auth.engine = CCP_ENGINE_SHA;
+			sess->auth.ut.sha_type = CCP_SHA_TYPE_224;
+			sess->auth.ctx_len = CCP_SB_BYTES;
+			sess->auth.offset = CCP_SB_BYTES - SHA224_DIGEST_SIZE;
+			sess->auth.block_size = SHA224_BLOCK_SIZE;
+			sess->auth.key_length = auth_xform->key.length;
+			memset(sess->auth.key, 0, sess->auth.block_size);
+			memset(sess->auth.pre_compute, 0,
+			       sess->auth.ctx_len << 1);
+			rte_memcpy(sess->auth.key, auth_xform->key.data,
+				   auth_xform->key.length);
+			if (generate_partial_hash(sess))
+				return -1;
+		}
 		break;
 	case RTE_CRYPTO_AUTH_SHA3_224:
 		sess->auth.algo = CCP_AUTH_ALGO_SHA3_224;
@@ -884,33 +886,34 @@ ccp_configure_session_auth(struct ccp_session *sess,
 		sess->auth.offset = CCP_SB_BYTES - SHA256_DIGEST_SIZE;
 		break;
 	case RTE_CRYPTO_AUTH_SHA256_HMAC:
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-		if (auth_xform->key.length > SHA256_BLOCK_SIZE)
-			return -1;
-		sess->auth.algo = CCP_AUTH_ALGO_SHA256_HMAC;
-		sess->auth.offset = CCP_SB_BYTES - SHA256_DIGEST_SIZE;
-		sess->auth.block_size = SHA256_BLOCK_SIZE;
-		sess->auth.key_length = auth_xform->key.length;
-		memset(sess->auth.key, 0, sess->auth.block_size);
-		rte_memcpy(sess->auth.key, auth_xform->key.data,
-			   auth_xform->key.length);
-#else
-		if (auth_xform->key.length > SHA256_BLOCK_SIZE)
-			return -1;
-		sess->auth.algo = CCP_AUTH_ALGO_SHA256_HMAC;
-		sess->auth.engine = CCP_ENGINE_SHA;
-		sess->auth.ut.sha_type = CCP_SHA_TYPE_256;
-		sess->auth.ctx_len = CCP_SB_BYTES;
-		sess->auth.offset = CCP_SB_BYTES - SHA256_DIGEST_SIZE;
-		sess->auth.block_size = SHA256_BLOCK_SIZE;
-		sess->auth.key_length = auth_xform->key.length;
-		memset(sess->auth.key, 0, sess->auth.block_size);
-		memset(sess->auth.pre_compute, 0, sess->auth.ctx_len << 1);
-		rte_memcpy(sess->auth.key, auth_xform->key.data,
-			   auth_xform->key.length);
-		if (generate_partial_hash(sess))
-			return -1;
-#endif
+		if (sess->auth_opt) {
+			if (auth_xform->key.length > SHA256_BLOCK_SIZE)
+				return -1;
+			sess->auth.algo = CCP_AUTH_ALGO_SHA256_HMAC;
+			sess->auth.offset = CCP_SB_BYTES - SHA256_DIGEST_SIZE;
+			sess->auth.block_size = SHA256_BLOCK_SIZE;
+			sess->auth.key_length = auth_xform->key.length;
+			memset(sess->auth.key, 0, sess->auth.block_size);
+			rte_memcpy(sess->auth.key, auth_xform->key.data,
+				   auth_xform->key.length);
+		} else {
+			if (auth_xform->key.length > SHA256_BLOCK_SIZE)
+				return -1;
+			sess->auth.algo = CCP_AUTH_ALGO_SHA256_HMAC;
+			sess->auth.engine = CCP_ENGINE_SHA;
+			sess->auth.ut.sha_type = CCP_SHA_TYPE_256;
+			sess->auth.ctx_len = CCP_SB_BYTES;
+			sess->auth.offset = CCP_SB_BYTES - SHA256_DIGEST_SIZE;
+			sess->auth.block_size = SHA256_BLOCK_SIZE;
+			sess->auth.key_length = auth_xform->key.length;
+			memset(sess->auth.key, 0, sess->auth.block_size);
+			memset(sess->auth.pre_compute, 0,
+			       sess->auth.ctx_len << 1);
+			rte_memcpy(sess->auth.key, auth_xform->key.data,
+				   auth_xform->key.length);
+			if (generate_partial_hash(sess))
+				return -1;
+		}
 		break;
 	case RTE_CRYPTO_AUTH_SHA3_256:
 		sess->auth.algo = CCP_AUTH_ALGO_SHA3_256;
@@ -945,33 +948,36 @@ ccp_configure_session_auth(struct ccp_session *sess,
 		sess->auth.offset = (CCP_SB_BYTES << 1) - SHA384_DIGEST_SIZE;
 		break;
 	case RTE_CRYPTO_AUTH_SHA384_HMAC:
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-		if (auth_xform->key.length > SHA384_BLOCK_SIZE)
-			return -1;
-		sess->auth.algo = CCP_AUTH_ALGO_SHA384_HMAC;
-		sess->auth.offset = (CCP_SB_BYTES << 1) - SHA384_DIGEST_SIZE;
-		sess->auth.block_size = SHA384_BLOCK_SIZE;
-		sess->auth.key_length = auth_xform->key.length;
-		memset(sess->auth.key, 0, sess->auth.block_size);
-		rte_memcpy(sess->auth.key, auth_xform->key.data,
-			   auth_xform->key.length);
-#else
-		if (auth_xform->key.length > SHA384_BLOCK_SIZE)
-			return -1;
-		sess->auth.algo = CCP_AUTH_ALGO_SHA384_HMAC;
-		sess->auth.engine = CCP_ENGINE_SHA;
-		sess->auth.ut.sha_type = CCP_SHA_TYPE_384;
-		sess->auth.ctx_len = CCP_SB_BYTES << 1;
-		sess->auth.offset = (CCP_SB_BYTES << 1) - SHA384_DIGEST_SIZE;
-		sess->auth.block_size = SHA384_BLOCK_SIZE;
-		sess->auth.key_length = auth_xform->key.length;
-		memset(sess->auth.key, 0, sess->auth.block_size);
-		memset(sess->auth.pre_compute, 0, sess->auth.ctx_len << 1);
-		rte_memcpy(sess->auth.key, auth_xform->key.data,
-			   auth_xform->key.length);
-		if (generate_partial_hash(sess))
-			return -1;
-#endif
+		if (sess->auth_opt) {
+			if (auth_xform->key.length > SHA384_BLOCK_SIZE)
+				return -1;
+			sess->auth.algo = CCP_AUTH_ALGO_SHA384_HMAC;
+			sess->auth.offset = ((CCP_SB_BYTES << 1) -
+					     SHA384_DIGEST_SIZE);
+			sess->auth.block_size = SHA384_BLOCK_SIZE;
+			sess->auth.key_length = auth_xform->key.length;
+			memset(sess->auth.key, 0, sess->auth.block_size);
+			rte_memcpy(sess->auth.key, auth_xform->key.data,
+				   auth_xform->key.length);
+		} else {
+			if (auth_xform->key.length > SHA384_BLOCK_SIZE)
+				return -1;
+			sess->auth.algo = CCP_AUTH_ALGO_SHA384_HMAC;
+			sess->auth.engine = CCP_ENGINE_SHA;
+			sess->auth.ut.sha_type = CCP_SHA_TYPE_384;
+			sess->auth.ctx_len = CCP_SB_BYTES << 1;
+			sess->auth.offset = ((CCP_SB_BYTES << 1) -
+					     SHA384_DIGEST_SIZE);
+			sess->auth.block_size = SHA384_BLOCK_SIZE;
+			sess->auth.key_length = auth_xform->key.length;
+			memset(sess->auth.key, 0, sess->auth.block_size);
+			memset(sess->auth.pre_compute, 0,
+			       sess->auth.ctx_len << 1);
+			rte_memcpy(sess->auth.key, auth_xform->key.data,
+				   auth_xform->key.length);
+			if (generate_partial_hash(sess))
+				return -1;
+		}
 		break;
 	case RTE_CRYPTO_AUTH_SHA3_384:
 		sess->auth.algo = CCP_AUTH_ALGO_SHA3_384;
@@ -1006,33 +1012,36 @@ ccp_configure_session_auth(struct ccp_session *sess,
 		sess->auth.offset = (CCP_SB_BYTES << 1) - SHA512_DIGEST_SIZE;
 		break;
 	case RTE_CRYPTO_AUTH_SHA512_HMAC:
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-		if (auth_xform->key.length > SHA512_BLOCK_SIZE)
-			return -1;
-		sess->auth.algo = CCP_AUTH_ALGO_SHA512_HMAC;
-		sess->auth.offset = (CCP_SB_BYTES << 1) - SHA512_DIGEST_SIZE;
-		sess->auth.block_size = SHA512_BLOCK_SIZE;
-		sess->auth.key_length = auth_xform->key.length;
-		memset(sess->auth.key, 0, sess->auth.block_size);
-		rte_memcpy(sess->auth.key, auth_xform->key.data,
-			   auth_xform->key.length);
-#else
-		if (auth_xform->key.length > SHA512_BLOCK_SIZE)
-			return -1;
-		sess->auth.algo = CCP_AUTH_ALGO_SHA512_HMAC;
-		sess->auth.engine = CCP_ENGINE_SHA;
-		sess->auth.ut.sha_type = CCP_SHA_TYPE_512;
-		sess->auth.ctx_len = CCP_SB_BYTES << 1;
-		sess->auth.offset = (CCP_SB_BYTES << 1) - SHA512_DIGEST_SIZE;
-		sess->auth.block_size = SHA512_BLOCK_SIZE;
-		sess->auth.key_length = auth_xform->key.length;
-		memset(sess->auth.key, 0, sess->auth.block_size);
-		memset(sess->auth.pre_compute, 0, sess->auth.ctx_len << 1);
-		rte_memcpy(sess->auth.key, auth_xform->key.data,
-			   auth_xform->key.length);
-		if (generate_partial_hash(sess))
-			return -1;
-#endif
+		if (sess->auth_opt) {
+			if (auth_xform->key.length > SHA512_BLOCK_SIZE)
+				return -1;
+			sess->auth.algo = CCP_AUTH_ALGO_SHA512_HMAC;
+			sess->auth.offset = ((CCP_SB_BYTES << 1) -
+					     SHA512_DIGEST_SIZE);
+			sess->auth.block_size = SHA512_BLOCK_SIZE;
+			sess->auth.key_length = auth_xform->key.length;
+			memset(sess->auth.key, 0, sess->auth.block_size);
+			rte_memcpy(sess->auth.key, auth_xform->key.data,
+				   auth_xform->key.length);
+		} else {
+			if (auth_xform->key.length > SHA512_BLOCK_SIZE)
+				return -1;
+			sess->auth.algo = CCP_AUTH_ALGO_SHA512_HMAC;
+			sess->auth.engine = CCP_ENGINE_SHA;
+			sess->auth.ut.sha_type = CCP_SHA_TYPE_512;
+			sess->auth.ctx_len = CCP_SB_BYTES << 1;
+			sess->auth.offset = ((CCP_SB_BYTES << 1) -
+					     SHA512_DIGEST_SIZE);
+			sess->auth.block_size = SHA512_BLOCK_SIZE;
+			sess->auth.key_length = auth_xform->key.length;
+			memset(sess->auth.key, 0, sess->auth.block_size);
+			memset(sess->auth.pre_compute, 0,
+			       sess->auth.ctx_len << 1);
+			rte_memcpy(sess->auth.key, auth_xform->key.data,
+				   auth_xform->key.length);
+			if (generate_partial_hash(sess))
+				return -1;
+		}
 		break;
 	case RTE_CRYPTO_AUTH_SHA3_512:
 		sess->auth.algo = CCP_AUTH_ALGO_SHA3_512;
@@ -1157,13 +1166,15 @@ ccp_configure_session_aead(struct ccp_session *sess,
 
 int
 ccp_set_session_parameters(struct ccp_session *sess,
-			   const struct rte_crypto_sym_xform *xform)
+			   const struct rte_crypto_sym_xform *xform,
+			   struct ccp_private *internals)
 {
 	const struct rte_crypto_sym_xform *cipher_xform = NULL;
 	const struct rte_crypto_sym_xform *auth_xform = NULL;
 	const struct rte_crypto_sym_xform *aead_xform = NULL;
 	int ret = 0;
 
+	sess->auth_opt = internals->auth_opt;
 	sess->cmd_id = ccp_get_cmd_id(xform);
 
 	switch (sess->cmd_id) {
@@ -1259,22 +1270,16 @@ ccp_auth_slot(struct ccp_session *session)
 		count = 3;
 		/**< op + lsb passthrough cpy to/from*/
 		break;
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
 	case CCP_AUTH_ALGO_MD5_HMAC:
 		break;
-#endif
 	case CCP_AUTH_ALGO_SHA1_HMAC:
 	case CCP_AUTH_ALGO_SHA224_HMAC:
 	case CCP_AUTH_ALGO_SHA256_HMAC:
-#ifndef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-		count = 6;
-#endif
+		if (session->auth_opt == 0)
+			count = 6;
 		break;
 	case CCP_AUTH_ALGO_SHA384_HMAC:
 	case CCP_AUTH_ALGO_SHA512_HMAC:
-#ifndef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-		count = 7;
-#endif
 		/**
 		 * 1. Load PHash1 = H(k ^ ipad); to LSB
 		 * 2. generate IHash = H(hash on meassage with PHash1
@@ -1285,6 +1290,8 @@ ccp_auth_slot(struct ccp_session *session)
 		 * as init value);
 		 * 6. Retrieve HMAC output from LSB to host memory
 		 */
+		if (session->auth_opt == 0)
+			count = 7;
 		break;
 	case CCP_AUTH_ALGO_SHA3_224:
 	case CCP_AUTH_ALGO_SHA3_256:
@@ -1381,7 +1388,6 @@ ccp_compute_slot_count(struct ccp_session *session)
 	return count;
 }
 
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
 static uint8_t
 algo_select(int sessalgo,
 	    const EVP_MD **algo)
@@ -1495,7 +1501,6 @@ static int cpu_crypto_auth(struct ccp_qp *qp,
 	EVP_PKEY_free(pkey);
 	return 0;
 }
-#endif
 
 static void
 ccp_perform_passthru(struct ccp_passthru *pst,
@@ -2592,26 +2597,24 @@ ccp_crypto_auth(struct rte_crypto_op *op,
 		result = ccp_perform_sha(op, cmd_q);
 		b_info->desccnt += 3;
 		break;
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
 	case CCP_AUTH_ALGO_MD5_HMAC:
+		if (session->auth_opt == 0)
+			result = -1;
 		break;
-#endif
 	case CCP_AUTH_ALGO_SHA1_HMAC:
 	case CCP_AUTH_ALGO_SHA224_HMAC:
 	case CCP_AUTH_ALGO_SHA256_HMAC:
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-		break;
-#endif
-		result = ccp_perform_hmac(op, cmd_q);
-		b_info->desccnt += 6;
+		if (session->auth_opt == 0) {
+			result = ccp_perform_hmac(op, cmd_q);
+			b_info->desccnt += 6;
+		}
 		break;
 	case CCP_AUTH_ALGO_SHA384_HMAC:
 	case CCP_AUTH_ALGO_SHA512_HMAC:
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-		break;
-#endif
-		result = ccp_perform_hmac(op, cmd_q);
-		b_info->desccnt += 7;
+		if (session->auth_opt == 0) {
+			result = ccp_perform_hmac(op, cmd_q);
+			b_info->desccnt += 7;
+		}
 		break;
 	case CCP_AUTH_ALGO_SHA3_224:
 	case CCP_AUTH_ALGO_SHA3_256:
@@ -2682,22 +2685,20 @@ process_ops_to_enqueue(struct ccp_qp *qp,
 	int i, result = 0;
 	struct ccp_batch_info *b_info;
 	struct ccp_session *session;
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
 	EVP_MD_CTX *auth_ctx = NULL;
-#endif
 
 	if (rte_mempool_get(qp->batch_mp, (void **)&b_info)) {
 		CCP_LOG_ERR("batch info allocation failed");
 		return 0;
 	}
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
+
 	auth_ctx = EVP_MD_CTX_create();
 	if (unlikely(!auth_ctx)) {
 		CCP_LOG_ERR("Unable to create auth ctx");
 		return 0;
 	}
 	b_info->auth_ctr = 0;
-#endif
+
 	/* populate batch info necessary for dequeue */
 	b_info->op_idx = 0;
 	b_info->lsb_buf_idx = 0;
@@ -2718,12 +2719,12 @@ process_ops_to_enqueue(struct ccp_qp *qp,
 			result = ccp_crypto_cipher(op[i], cmd_q, b_info);
 			break;
 		case CCP_CMD_AUTH:
-			result = ccp_crypto_auth(op[i], cmd_q, b_info);
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-			b_info->auth_ctr++;
-			result = cpu_crypto_auth(qp, op[i],
-						 session, auth_ctx);
-#endif
+			if (session->auth_opt) {
+				b_info->auth_ctr++;
+				result = cpu_crypto_auth(qp, op[i],
+							 session, auth_ctx);
+			} else
+				result = ccp_crypto_auth(op[i], cmd_q, b_info);
 			break;
 		case CCP_CMD_CIPHER_HASH:
 			result = ccp_crypto_cipher(op[i], cmd_q, b_info);
@@ -2732,13 +2733,15 @@ process_ops_to_enqueue(struct ccp_qp *qp,
 			result = ccp_crypto_auth(op[i], cmd_q, b_info);
 			break;
 		case CCP_CMD_HASH_CIPHER:
-			result = ccp_crypto_auth(op[i], cmd_q, b_info);
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-			result = cpu_crypto_auth(qp, op[i],
-						 session, auth_ctx);
-			if (op[i]->status != RTE_CRYPTO_OP_STATUS_SUCCESS)
-				continue;
-#endif
+			if (session->auth_opt) {
+				result = cpu_crypto_auth(qp, op[i],
+							 session, auth_ctx);
+				if (op[i]->status !=
+				    RTE_CRYPTO_OP_STATUS_SUCCESS)
+					continue;
+			} else
+				result = ccp_crypto_auth(op[i], cmd_q, b_info);
+
 			if (result)
 				break;
 			result = ccp_crypto_cipher(op[i], cmd_q, b_info);
@@ -2772,9 +2775,7 @@ process_ops_to_enqueue(struct ccp_qp *qp,
 
 	rte_ring_enqueue(qp->processed_pkts, (void *)b_info);
 
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
 	EVP_MD_CTX_destroy(auth_ctx);
-#endif
 	return i;
 }
 
@@ -2843,11 +2844,7 @@ static inline void ccp_auth_dq_prepare(struct rte_crypto_op *op)
 }
 
 static int
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
 ccp_prepare_ops(struct ccp_qp *qp,
-#else
-ccp_prepare_ops(struct ccp_qp *qp __rte_unused,
-#endif
 		struct rte_crypto_op **op_d,
 		struct ccp_batch_info *b_info,
 		uint16_t nb_ops)
@@ -2855,7 +2852,6 @@ ccp_prepare_ops(struct ccp_qp *qp __rte_unused,
 	int i, min_ops;
 	struct ccp_session *session;
 
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
 	EVP_MD_CTX *auth_ctx = NULL;
 
 	auth_ctx = EVP_MD_CTX_create();
@@ -2863,7 +2859,6 @@ ccp_prepare_ops(struct ccp_qp *qp __rte_unused,
 		CCP_LOG_ERR("Unable to create auth ctx");
 		return 0;
 	}
-#endif
 	min_ops = RTE_MIN(nb_ops, b_info->opcnt);
 
 	for (i = 0; i < min_ops; i++) {
@@ -2876,24 +2871,21 @@ ccp_prepare_ops(struct ccp_qp *qp __rte_unused,
 			op_d[i]->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
 			break;
 		case CCP_CMD_AUTH:
-#ifndef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-			ccp_auth_dq_prepare(op_d[i]);
-#endif
+			if (session->auth_opt == 0)
+				ccp_auth_dq_prepare(op_d[i]);
 			break;
 		case CCP_CMD_CIPHER_HASH:
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-			cpu_crypto_auth(qp, op_d[i],
-					session, auth_ctx);
-#else
-			ccp_auth_dq_prepare(op_d[i]);
-#endif
+			if (session->auth_opt)
+				cpu_crypto_auth(qp, op_d[i],
+						session, auth_ctx);
+			else
+				ccp_auth_dq_prepare(op_d[i]);
 			break;
 		case CCP_CMD_HASH_CIPHER:
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-			op_d[i]->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
-#else
-			ccp_auth_dq_prepare(op_d[i]);
-#endif
+			if (session->auth_opt)
+				op_d[i]->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
+			else
+				ccp_auth_dq_prepare(op_d[i]);
 			break;
 		case CCP_CMD_COMBINED:
 			ccp_auth_dq_prepare(op_d[i]);
@@ -2903,9 +2895,7 @@ ccp_prepare_ops(struct ccp_qp *qp __rte_unused,
 		}
 	}
 
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
 	EVP_MD_CTX_destroy(auth_ctx);
-#endif
 	b_info->opcnt -= min_ops;
 	return min_ops;
 }
@@ -2925,10 +2915,9 @@ process_ops_to_dequeue(struct ccp_qp *qp,
 	} else if (rte_ring_dequeue(qp->processed_pkts,
 				    (void **)&b_info))
 		return 0;
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
+
 	if (b_info->auth_ctr == b_info->opcnt)
 		goto success;
-#endif
 	cur_head_offset = CCP_READ_REG(b_info->cmd_q->reg_base,
 				       CMD_Q_HEAD_LO_BASE);
 
diff --git a/drivers/crypto/ccp/ccp_crypto.h b/drivers/crypto/ccp/ccp_crypto.h
index dd89ad9..882b398 100644
--- a/drivers/crypto/ccp/ccp_crypto.h
+++ b/drivers/crypto/ccp/ccp_crypto.h
@@ -42,10 +42,9 @@
 #define HMAC_IPAD_VALUE 0x36
 #define HMAC_OPAD_VALUE 0x5c
 
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
+/* MD5 */
 #define MD5_DIGEST_SIZE         16
 #define MD5_BLOCK_SIZE          64
-#endif
 
 /* SHA */
 #define SHA_COMMON_DIGEST_SIZE	32
@@ -235,9 +234,7 @@ enum ccp_hash_algo {
 	CCP_AUTH_ALGO_SHA3_512_HMAC,
 	CCP_AUTH_ALGO_AES_CMAC,
 	CCP_AUTH_ALGO_AES_GCM,
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
 	CCP_AUTH_ALGO_MD5_HMAC,
-#endif
 };
 
 /**
@@ -250,6 +247,7 @@ enum ccp_hash_op {
 
 /* CCP crypto private session structure */
 struct ccp_session {
+	bool auth_opt;
 	enum ccp_cmd_order cmd_id;
 	/**< chain order mode */
 	struct {
@@ -321,6 +319,7 @@ struct ccp_session {
 extern uint8_t ccp_cryptodev_driver_id;
 
 struct ccp_qp;
+struct ccp_private;
 
 /**
  * Set and validate CCP crypto session parameters
@@ -330,7 +329,8 @@ struct ccp_qp;
  * @return 0 on success otherwise -1
  */
 int ccp_set_session_parameters(struct ccp_session *sess,
-			       const struct rte_crypto_sym_xform *xform);
+			       const struct rte_crypto_sym_xform *xform,
+			       struct ccp_private *internals);
 
 /**
  * Find count of slots
diff --git a/drivers/crypto/ccp/ccp_pmd_ops.c b/drivers/crypto/ccp/ccp_pmd_ops.c
index 3d0d875..80b75cc 100644
--- a/drivers/crypto/ccp/ccp_pmd_ops.c
+++ b/drivers/crypto/ccp/ccp_pmd_ops.c
@@ -12,538 +12,547 @@
 #include "ccp_dev.h"
 #include "ccp_crypto.h"
 
-static const struct rte_cryptodev_capabilities ccp_pmd_capabilities[] = {
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
-	{	/* MD5 HMAC */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_MD5_HMAC,
-				 .block_size = 64,
-				 .key_size = {
-					 .min = 1,
-					 .max = 64,
-					 .increment = 1
-				 },
-				 .digest_size = {
-					 .min = 16,
-					 .max = 16,
-					 .increment = 0
-				 },
-				 .aad_size = { 0 }
-			}, }
-		}, }
-	},
-#endif
-	{	/* SHA1 */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_SHA1,
-				 .block_size = 64,
-				 .key_size = {
-					 .min = 0,
-					 .max = 0,
-					 .increment = 0
-				 },
-				 .digest_size = {
-					 .min = 20,
-					 .max = 20,
-					 .increment = 0
-				 },
-				 .aad_size = { 0 }
-			 }, }
-		}, }
-	},
-	{	/* SHA1 HMAC */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
-				 .block_size = 64,
-				 .key_size = {
-					 .min = 1,
-					 .max = 64,
-					 .increment = 1
-				 },
-				 .digest_size = {
-					 .min = 20,
-					 .max = 20,
-					 .increment = 0
-				 },
-				 .aad_size = { 0 }
-			 }, }
-		}, }
-	},
-	{	/* SHA224 */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_SHA224,
-				 .block_size = 64,
-				 .key_size = {
-					 .min = 0,
-					 .max = 0,
-					 .increment = 0
-				 },
-				 .digest_size = {
-					 .min = 28,
-					 .max = 28,
-					 .increment = 0
-				 },
-				 .aad_size = { 0 }
-			 }, }
-		}, }
-	},
-	{	/* SHA224 HMAC */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_SHA224_HMAC,
-				 .block_size = 64,
-				 .key_size = {
-					 .min = 1,
-					 .max = 64,
-					 .increment = 1
-				 },
-				 .digest_size = {
-					 .min = 28,
-					 .max = 28,
-					 .increment = 0
-				 },
-				 .aad_size = { 0 }
-			 }, }
-		}, }
-	},
-	{	/* SHA3-224 */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_SHA3_224,
-				 .block_size = 144,
-				 .key_size = {
-					 .min = 0,
-					 .max = 0,
-					 .increment = 0
-				 },
-				 .digest_size = {
-					 .min = 28,
-					 .max = 28,
-					 .increment = 0
-				 },
-				 .aad_size = { 0 }
-			 }, }
-		}, }
-	},
-	{	/* SHA3-224  HMAC*/
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_SHA3_224_HMAC,
-				 .block_size = 144,
-				 .key_size = {
-					 .min = 1,
-					 .max = 144,
-					 .increment = 1
-				 },
-				 .digest_size = {
-					 .min = 28,
-					 .max = 28,
-					 .increment = 0
-				 },
-				 .aad_size = { 0 }
-			 }, }
-		}, }
-	},
-	{	/* SHA256 */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_SHA256,
-				 .block_size = 64,
-				 .key_size = {
-					 .min = 0,
-					 .max = 0,
-					 .increment = 0
-				 },
-				 .digest_size = {
-					 .min = 32,
-					 .max = 32,
-					 .increment = 0
-				 },
-				 .aad_size = { 0 }
-			 }, }
-		}, }
-	},
-	{	/* SHA256 HMAC */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_SHA256_HMAC,
-				 .block_size = 64,
-				 .key_size = {
-					 .min = 1,
-					 .max = 64,
-					 .increment = 1
-				 },
-				 .digest_size = {
-					 .min = 32,
-					 .max = 32,
-					 .increment = 0
-				 },
-				 .aad_size = { 0 }
-			 }, }
-		}, }
-	},
-	{	/* SHA3-256 */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_SHA3_256,
-				 .block_size = 136,
-				 .key_size = {
-					 .min = 0,
-					 .max = 0,
-					 .increment = 0
-				 },
-				 .digest_size = {
-					 .min = 32,
-					 .max = 32,
-					 .increment = 0
-				 },
-				 .aad_size = { 0 }
-			 }, }
-		}, }
-	},
-	{	/* SHA3-256-HMAC */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_SHA3_256_HMAC,
-				 .block_size = 136,
-				 .key_size = {
-					 .min = 1,
-					 .max = 136,
-					 .increment = 1
-				 },
-				 .digest_size = {
-					 .min = 32,
-					 .max = 32,
-					 .increment = 0
-				 },
-				 .aad_size = { 0 }
-			 }, }
-		}, }
-	},
-	{	/* SHA384 */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_SHA384,
-				 .block_size = 128,
-				 .key_size = {
-					 .min = 0,
-					 .max = 0,
-					 .increment = 0
-				 },
-				 .digest_size = {
-					 .min = 48,
-					 .max = 48,
-					 .increment = 0
-				 },
-				 .aad_size = { 0 }
-			 }, }
-		}, }
-	},
-	{	/* SHA384 HMAC */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_SHA384_HMAC,
-				 .block_size = 128,
-				 .key_size = {
-					 .min = 1,
-					 .max = 128,
-					 .increment = 1
-				 },
-				 .digest_size = {
-					 .min = 48,
-					 .max = 48,
-					 .increment = 0
-				 },
-				 .aad_size = { 0 }
-			 }, }
-		}, }
-	},
-	{	/* SHA3-384 */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_SHA3_384,
-				 .block_size = 104,
-				 .key_size = {
-					 .min = 0,
-					 .max = 0,
-					 .increment = 0
-				 },
-				 .digest_size = {
-					 .min = 48,
-					 .max = 48,
-					 .increment = 0
-				 },
-				 .aad_size = { 0 }
-			 }, }
-		}, }
-	},
-	{	/* SHA3-384-HMAC */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_SHA3_384_HMAC,
-				 .block_size = 104,
-				 .key_size = {
-					 .min = 1,
-					 .max = 104,
-					 .increment = 1
-				 },
-				 .digest_size = {
-					 .min = 48,
-					 .max = 48,
-					 .increment = 0
-				 },
-				 .aad_size = { 0 }
-			 }, }
-		}, }
-	},
-	{	/* SHA512  */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_SHA512,
-				 .block_size = 128,
-				 .key_size = {
-					 .min = 0,
-					 .max = 0,
-					 .increment = 0
-				 },
-				 .digest_size = {
-					 .min = 64,
-					 .max = 64,
-					 .increment = 0
-				 },
-				 .aad_size = { 0 }
-			 }, }
-		}, }
-	},
-	{	/* SHA512 HMAC */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_SHA512_HMAC,
-				 .block_size = 128,
-				 .key_size = {
-					 .min = 1,
-					 .max = 128,
-					 .increment = 1
-				 },
-				 .digest_size = {
-					 .min = 64,
-					 .max = 64,
-					 .increment = 0
-				 },
-				 .aad_size = { 0 }
-			 }, }
-		}, }
-	},
-	{	/* SHA3-512  */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_SHA3_512,
-				 .block_size = 72,
-				 .key_size = {
-					 .min = 0,
-					 .max = 0,
-					 .increment = 0
-				 },
-				 .digest_size = {
-					 .min = 64,
-					 .max = 64,
-					 .increment = 0
-				 },
-				 .aad_size = { 0 }
-			 }, }
-		}, }
-	},
-	{	/* SHA3-512-HMAC  */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_SHA3_512_HMAC,
-				 .block_size = 72,
-				 .key_size = {
-					 .min = 1,
-					 .max = 72,
-					 .increment = 1
-				 },
-				 .digest_size = {
-					 .min = 64,
-					 .max = 64,
-					 .increment = 0
-				 },
-				 .aad_size = { 0 }
-			}, }
-		}, }
-	},
-	{	/*AES-CMAC */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
-			{.auth = {
-				 .algo = RTE_CRYPTO_AUTH_AES_CMAC,
-				 .block_size = 16,
-				 .key_size = {
-					 .min = 16,
-					 .max = 32,
-					 .increment = 8
-				 },
-				 .digest_size = {
-					 .min = 16,
-					 .max = 16,
-					 .increment = 0
-				 },
-			}, }
-		}, }
-	},
-	{       /* AES ECB */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
-			{.cipher = {
-				.algo = RTE_CRYPTO_CIPHER_AES_ECB,
-				.block_size = 16,
-				.key_size = {
-				   .min = 16,
-				   .max = 32,
-				   .increment = 8
-				},
-				.iv_size = {
-				   .min = 0,
-				   .max = 0,
-				   .increment = 0
-				}
-			}, }
-		}, }
-	},
-	{       /* AES CBC */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
-			{.cipher = {
-				.algo = RTE_CRYPTO_CIPHER_AES_CBC,
-				.block_size = 16,
-				.key_size = {
-					.min = 16,
-					.max = 32,
-					.increment = 8
-				},
-				.iv_size = {
-					.min = 16,
-					.max = 16,
-					.increment = 0
-				}
-			}, }
-		}, }
-	},
-	{	/* AES CTR */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
-			{.cipher = {
-				.algo = RTE_CRYPTO_CIPHER_AES_CTR,
-				.block_size = 16,
-				.key_size = {
-					.min = 16,
-					.max = 32,
-					.increment = 8
-				},
-				.iv_size = {
-					.min = 16,
-					.max = 16,
-					.increment = 0
-				}
-			}, }
-		}, }
-	},
-	{	/* 3DES CBC */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
-			{.cipher = {
-				.algo = RTE_CRYPTO_CIPHER_3DES_CBC,
-				.block_size = 8,
-				.key_size = {
-					.min = 16,
-					.max = 24,
-					.increment = 8
-				},
-				.iv_size = {
-					.min = 8,
-					.max = 8,
-					.increment = 0
-				}
-			}, }
-		}, }
-	},
-	{       /* AES GCM */
-		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
-		{.sym = {
-			.xform_type = RTE_CRYPTO_SYM_XFORM_AEAD,
-			{.aead = {
-				 .algo = RTE_CRYPTO_AEAD_AES_GCM,
-				 .block_size = 16,
-				 .key_size = {
-					 .min = 16,
-					 .max = 32,
-					 .increment = 8
-				 },
-				 .digest_size = {
-					 .min = 16,
-					 .max = 16,
-					 .increment = 0
-				 },
-				 .aad_size = {
-					 .min = 0,
-					 .max = 65535,
-					 .increment = 1
-				 },
-				 .iv_size = {
-					 .min = 12,
-					 .max = 16,
-					 .increment = 4
-				 },
-			}, }
-		}, }
-	},
+#define CCP_BASE_SYM_CRYPTO_CAPABILITIES				\
+	{	/* SHA1 */						\
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,			\
+		{.sym = {						\
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,	\
+			{.auth = {					\
+				 .algo = RTE_CRYPTO_AUTH_SHA1,		\
+				 .block_size = 64,			\
+				 .key_size = {				\
+					 .min = 0,			\
+					 .max = 0,			\
+					 .increment = 0			\
+				 },					\
+				 .digest_size = {			\
+					 .min = 20,			\
+					 .max = 20,			\
+					 .increment = 0			\
+				 },					\
+				 .aad_size = { 0 }			\
+			 }, }						\
+		}, }							\
+	},								\
+	{	/* SHA1 HMAC */						\
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,			\
+		{.sym = {						\
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,	\
+			{.auth = {					\
+				 .algo = RTE_CRYPTO_AUTH_SHA1_HMAC,     \
+				 .block_size = 64,                      \
+				 .key_size = {                          \
+					 .min = 1,                      \
+					 .max = 64,                     \
+					 .increment = 1                 \
+				 },                                     \
+				 .digest_size = {                       \
+					 .min = 20,                     \
+					 .max = 20,                     \
+					 .increment = 0                 \
+				 },                                     \
+				 .aad_size = { 0 }                      \
+			 }, }                                           \
+		}, }                                                    \
+	},                                                              \
+	{	/* SHA224 */                                            \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,        \
+			{.auth = {                                      \
+				 .algo = RTE_CRYPTO_AUTH_SHA224,        \
+				 .block_size = 64,                      \
+				 .key_size = {                          \
+					 .min = 0,                      \
+					 .max = 0,			\
+					 .increment = 0                 \
+				 },                                     \
+				 .digest_size = {                       \
+					 .min = 28,                     \
+					 .max = 28,                     \
+					 .increment = 0                 \
+				 },                                     \
+				 .aad_size = { 0 }                      \
+			 }, }                                           \
+		}, }                                                    \
+	},                                                              \
+	{	/* SHA224 HMAC */                                       \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,        \
+			{.auth = {                                      \
+				 .algo = RTE_CRYPTO_AUTH_SHA224_HMAC,   \
+				 .block_size = 64,                      \
+				 .key_size = {                          \
+					 .min = 1,                      \
+					 .max = 64,                     \
+					 .increment = 1                 \
+				 },                                     \
+				 .digest_size = {                       \
+					 .min = 28,                     \
+					 .max = 28,                     \
+					 .increment = 0                 \
+				 },                                     \
+				 .aad_size = { 0 }                      \
+			 }, }                                           \
+		}, }                                                    \
+	},                                                              \
+	{	/* SHA3-224 */                                          \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,        \
+			{.auth = {                                      \
+				 .algo = RTE_CRYPTO_AUTH_SHA3_224,      \
+				 .block_size = 144,                     \
+				 .key_size = {                          \
+					 .min = 0,                      \
+					 .max = 0,                      \
+					 .increment = 0                 \
+				 },                                     \
+				 .digest_size = {                       \
+					 .min = 28,                     \
+					 .max = 28,                     \
+					 .increment = 0                 \
+				 },                                     \
+				 .aad_size = { 0 }                      \
+			 }, }                                           \
+		}, }							\
+	},                                                              \
+	{	/* SHA3-224  HMAC*/                                     \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,        \
+			{.auth = {                                      \
+				 .algo = RTE_CRYPTO_AUTH_SHA3_224_HMAC, \
+				 .block_size = 144,                     \
+				 .key_size = {                          \
+					 .min = 1,                      \
+					 .max = 144,                    \
+					 .increment = 1                 \
+				 },                                     \
+				 .digest_size = {                       \
+					 .min = 28,                     \
+					 .max = 28,                     \
+					 .increment = 0                 \
+				 },                                     \
+				 .aad_size = { 0 }                      \
+			 }, }                                           \
+		}, }                                                    \
+	},                                                              \
+	{	/* SHA256 */                                            \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,        \
+			{.auth = {                                      \
+				 .algo = RTE_CRYPTO_AUTH_SHA256,        \
+				 .block_size = 64,                      \
+				 .key_size = {                          \
+					 .min = 0,                      \
+					 .max = 0,                      \
+					 .increment = 0                 \
+				 },                                     \
+				 .digest_size = {                       \
+					 .min = 32,                     \
+					 .max = 32,                     \
+					 .increment = 0                 \
+				 },                                     \
+				 .aad_size = { 0 }                      \
+			 }, }                                           \
+		}, }                                                    \
+	},                                                              \
+	{	/* SHA256 HMAC */                                       \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,        \
+			{.auth = {                                      \
+				 .algo = RTE_CRYPTO_AUTH_SHA256_HMAC,   \
+				 .block_size = 64,                      \
+				 .key_size = {                          \
+					 .min = 1,                      \
+					 .max = 64,                     \
+					 .increment = 1                 \
+				 },                                     \
+				 .digest_size = {                       \
+					 .min = 32,                     \
+					 .max = 32,                     \
+					 .increment = 0                 \
+				 },                                     \
+				 .aad_size = { 0 }                      \
+			 }, }                                           \
+		}, }                                                    \
+	},                                                              \
+	{	/* SHA3-256 */                                          \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,        \
+			{.auth = {                                      \
+				 .algo = RTE_CRYPTO_AUTH_SHA3_256,      \
+				 .block_size = 136,                     \
+				 .key_size = {                          \
+					 .min = 0,                      \
+					 .max = 0,                      \
+					 .increment = 0                 \
+				 },                                     \
+				 .digest_size = {                       \
+					 .min = 32,                     \
+					 .max = 32,                     \
+					 .increment = 0                 \
+				 },                                     \
+				 .aad_size = { 0 }                      \
+			 }, }                                           \
+		}, }                                                    \
+	},                                                              \
+	{	/* SHA3-256-HMAC */                                     \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,        \
+			{.auth = {                                      \
+				 .algo = RTE_CRYPTO_AUTH_SHA3_256_HMAC, \
+				 .block_size = 136,                     \
+				 .key_size = {                          \
+					 .min = 1,                      \
+					 .max = 136,                    \
+					 .increment = 1                 \
+				 },                                     \
+				 .digest_size = {                       \
+					 .min = 32,                     \
+					 .max = 32,                     \
+					 .increment = 0                 \
+				 },                                     \
+				 .aad_size = { 0 }                      \
+			 }, }						\
+		}, }                                                    \
+	},                                                              \
+	{	/* SHA384 */                                            \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,        \
+			{.auth = {                                      \
+				 .algo = RTE_CRYPTO_AUTH_SHA384,        \
+				 .block_size = 128,                     \
+				 .key_size = {                          \
+					 .min = 0,                      \
+					 .max = 0,                      \
+					 .increment = 0                 \
+				 },                                     \
+				 .digest_size = {                       \
+					 .min = 48,                     \
+					 .max = 48,                     \
+					 .increment = 0                 \
+				 },                                     \
+				 .aad_size = { 0 }                      \
+			 }, }                                           \
+		}, }                                                    \
+	},                                                              \
+	{	/* SHA384 HMAC */                                       \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,        \
+			{.auth = {                                      \
+				 .algo = RTE_CRYPTO_AUTH_SHA384_HMAC,   \
+				 .block_size = 128,                     \
+				 .key_size = {                          \
+					 .min = 1,                      \
+					 .max = 128,                    \
+					 .increment = 1                 \
+				 },                                     \
+				 .digest_size = {                       \
+					 .min = 48,                     \
+					 .max = 48,                     \
+					 .increment = 0                 \
+				 },                                     \
+				 .aad_size = { 0 }                      \
+			 }, }                                           \
+		}, }                                                    \
+	},                                                              \
+	{	/* SHA3-384 */                                          \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,        \
+			{.auth = {                                      \
+				 .algo = RTE_CRYPTO_AUTH_SHA3_384,      \
+				 .block_size = 104,                     \
+				 .key_size = {                          \
+					 .min = 0,                      \
+					 .max = 0,                      \
+					 .increment = 0                 \
+				 },                                     \
+				 .digest_size = {                       \
+					 .min = 48,                     \
+					 .max = 48,                     \
+					 .increment = 0                 \
+				 },                                     \
+				 .aad_size = { 0 }                      \
+			 }, }                                           \
+		}, }                                                    \
+	},                                                              \
+	{	/* SHA3-384-HMAC */                                     \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,        \
+			{.auth = {                                      \
+				 .algo = RTE_CRYPTO_AUTH_SHA3_384_HMAC, \
+				 .block_size = 104,                     \
+				 .key_size = {                          \
+					 .min = 1,                      \
+					 .max = 104,                    \
+					 .increment = 1                 \
+				 },                                     \
+				 .digest_size = {                       \
+					 .min = 48,                     \
+					 .max = 48,                     \
+					 .increment = 0                 \
+				 },                                     \
+				 .aad_size = { 0 }                      \
+			 }, }                                           \
+		}, }                                                    \
+	},                                                              \
+	{	/* SHA512  */                                           \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,        \
+			{.auth = {                                      \
+				 .algo = RTE_CRYPTO_AUTH_SHA512,        \
+				 .block_size = 128,                     \
+				 .key_size = {                          \
+					 .min = 0,                      \
+					 .max = 0,                      \
+					 .increment = 0                 \
+				 },                                     \
+				 .digest_size = {                       \
+					 .min = 64,                     \
+					 .max = 64,                     \
+					 .increment = 0                 \
+				 },                                     \
+				 .aad_size = { 0 }			\
+			 }, }                                           \
+		}, }                                                    \
+	},                                                              \
+	{	/* SHA512 HMAC */                                       \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,        \
+			{.auth = {                                      \
+				 .algo = RTE_CRYPTO_AUTH_SHA512_HMAC,   \
+				 .block_size = 128,                     \
+				 .key_size = {                          \
+					 .min = 1,                      \
+					 .max = 128,                    \
+					 .increment = 1                 \
+				 },                                     \
+				 .digest_size = {                       \
+					 .min = 64,                     \
+					 .max = 64,                     \
+					 .increment = 0                 \
+				 },                                     \
+				 .aad_size = { 0 }                      \
+			 }, }                                           \
+		}, }                                                    \
+	},                                                              \
+	{	/* SHA3-512  */                                         \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,        \
+			{.auth = {                                      \
+				 .algo = RTE_CRYPTO_AUTH_SHA3_512,      \
+				 .block_size = 72,                      \
+				 .key_size = {                          \
+					 .min = 0,                      \
+					 .max = 0,                      \
+					 .increment = 0                 \
+				 },                                     \
+				 .digest_size = {                       \
+					 .min = 64,                     \
+					 .max = 64,                     \
+					 .increment = 0                 \
+				 },                                     \
+				 .aad_size = { 0 }                      \
+			 }, }                                           \
+		}, }                                                    \
+	},                                                              \
+	{	/* SHA3-512-HMAC  */                                    \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,        \
+			{.auth = {                                      \
+				 .algo = RTE_CRYPTO_AUTH_SHA3_512_HMAC, \
+				 .block_size = 72,                      \
+				 .key_size = {                          \
+					 .min = 1,                      \
+					 .max = 72,                     \
+					 .increment = 1                 \
+				 },                                     \
+				 .digest_size = {                       \
+					 .min = 64,                     \
+					 .max = 64,                     \
+					 .increment = 0                 \
+				 },                                     \
+				 .aad_size = { 0 }                      \
+			}, }                                            \
+		}, }                                                    \
+	},                                                              \
+	{	/*AES-CMAC */                                           \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,        \
+			{.auth = {                                      \
+				 .algo = RTE_CRYPTO_AUTH_AES_CMAC,      \
+				 .block_size = 16,                      \
+				 .key_size = {                          \
+					 .min = 16,                     \
+					 .max = 32,                     \
+					 .increment = 8                 \
+				 },                                     \
+				 .digest_size = {                       \
+					 .min = 16,                     \
+					 .max = 16,                     \
+					 .increment = 0                 \
+				 },                                     \
+			}, }                                            \
+		}, }                                                    \
+	},                                                              \
+	{       /* AES ECB */                                           \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,      \
+			{.cipher = {                                    \
+				.algo = RTE_CRYPTO_CIPHER_AES_ECB,      \
+				.block_size = 16,                       \
+				.key_size = {                           \
+				   .min = 16,                           \
+				   .max = 32,                           \
+				   .increment = 8                       \
+				},                                      \
+				.iv_size = {                            \
+				   .min = 0,                            \
+				   .max = 0,                            \
+				   .increment = 0                       \
+				}                                       \
+			}, }						\
+		}, }                                                    \
+	},                                                              \
+	{       /* AES CBC */                                           \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,      \
+			{.cipher = {                                    \
+				.algo = RTE_CRYPTO_CIPHER_AES_CBC,      \
+				.block_size = 16,                       \
+				.key_size = {                           \
+					.min = 16,                      \
+					.max = 32,                      \
+					.increment = 8                  \
+				},                                      \
+				.iv_size = {                            \
+					.min = 16,                      \
+					.max = 16,                      \
+					.increment = 0                  \
+				}                                       \
+			}, }                                            \
+		}, }                                                    \
+	},                                                              \
+	{	/* AES CTR */                                           \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,      \
+			{.cipher = {                                    \
+				.algo = RTE_CRYPTO_CIPHER_AES_CTR,      \
+				.block_size = 16,                       \
+				.key_size = {                           \
+					.min = 16,                      \
+					.max = 32,                      \
+					.increment = 8                  \
+				},                                      \
+				.iv_size = {                            \
+					.min = 16,                      \
+					.max = 16,                      \
+					.increment = 0                  \
+				}                                       \
+			}, }                                            \
+		}, }                                                    \
+	},                                                              \
+	{	/* 3DES CBC */                                          \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,      \
+			{.cipher = {                                    \
+				.algo = RTE_CRYPTO_CIPHER_3DES_CBC,     \
+				.block_size = 8,                        \
+				.key_size = {                           \
+					.min = 16,                      \
+					.max = 24,                      \
+					.increment = 8                  \
+				},                                      \
+				.iv_size = {                            \
+					.min = 8,                       \
+					.max = 8,                       \
+					.increment = 0                  \
+				}                                       \
+			}, }                                            \
+		}, }                                                    \
+	},                                                              \
+	{       /* AES GCM */                                           \
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,                     \
+		{.sym = {                                               \
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AEAD,        \
+			{.aead = {                                      \
+				 .algo = RTE_CRYPTO_AEAD_AES_GCM,       \
+				 .block_size = 16,                      \
+				 .key_size = {                          \
+					 .min = 16,                     \
+					 .max = 32,                     \
+					 .increment = 8                 \
+				 },                                     \
+				 .digest_size = {                       \
+					 .min = 16,                     \
+					 .max = 16,                     \
+					 .increment = 0                 \
+				 },                                     \
+				 .aad_size = {                          \
+					 .min = 0,                      \
+					 .max = 65535,                  \
+					 .increment = 1                 \
+				 },                                     \
+				 .iv_size = {                           \
+					 .min = 12,                     \
+					 .max = 16,                     \
+					 .increment = 4                 \
+				 },                                     \
+			}, }                                            \
+		}, }                                                    \
+	}
+
+#define CCP_EXTRA_SYM_CRYPTO_CAPABILITIES				\
+	{	/* MD5 HMAC */						\
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,			\
+		{.sym = {						\
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,	\
+			{.auth = {					\
+				 .algo = RTE_CRYPTO_AUTH_MD5_HMAC,	\
+				 .block_size = 64,			\
+				 .key_size = {				\
+					 .min = 1,			\
+					 .max = 64,			\
+					 .increment = 1			\
+				 },					\
+				 .digest_size = {			\
+					 .min = 16,			\
+					 .max = 16,			\
+					 .increment = 0			\
+				 },					\
+				 .aad_size = { 0 }			\
+			}, }						\
+		}, }							\
+	}
+
+static const struct rte_cryptodev_capabilities ccp_crypto_cap[] = {
+	CCP_BASE_SYM_CRYPTO_CAPABILITIES,
+	RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST()
+};
+
+static const struct rte_cryptodev_capabilities ccp_crypto_cap_complete[] = {
+	CCP_EXTRA_SYM_CRYPTO_CAPABILITIES,
+	CCP_BASE_SYM_CRYPTO_CAPABILITIES,
 	RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST()
 };
 
@@ -611,7 +620,9 @@ ccp_pmd_info_get(struct rte_cryptodev *dev,
 	if (dev_info != NULL) {
 		dev_info->driver_id = dev->driver_id;
 		dev_info->feature_flags = dev->feature_flags;
-		dev_info->capabilities = ccp_pmd_capabilities;
+		dev_info->capabilities = ccp_crypto_cap;
+		if (internals->auth_opt == 1)
+			dev_info->capabilities = ccp_crypto_cap_complete;
 		dev_info->max_nb_queue_pairs = internals->max_nb_qpairs;
 		dev_info->sym.max_nb_sessions = internals->max_nb_sessions;
 	}
@@ -770,6 +781,7 @@ ccp_pmd_session_configure(struct rte_cryptodev *dev,
 {
 	int ret;
 	void *sess_private_data;
+	struct ccp_private *internals;
 
 	if (unlikely(sess == NULL || xform == NULL)) {
 		CCP_LOG_ERR("Invalid session struct or xform");
@@ -780,7 +792,8 @@ ccp_pmd_session_configure(struct rte_cryptodev *dev,
 		CCP_LOG_ERR("Couldn't get object from session mempool");
 		return -ENOMEM;
 	}
-	ret = ccp_set_session_parameters(sess_private_data, xform);
+	internals = (struct ccp_private *)dev->data->dev_private;
+	ret = ccp_set_session_parameters(sess_private_data, xform, internals);
 	if (ret != 0) {
 		CCP_LOG_ERR("failed configure session parameters");
 
diff --git a/drivers/crypto/ccp/ccp_pmd_private.h b/drivers/crypto/ccp/ccp_pmd_private.h
index 560bed9..f449804 100644
--- a/drivers/crypto/ccp/ccp_pmd_private.h
+++ b/drivers/crypto/ccp/ccp_pmd_private.h
@@ -42,6 +42,7 @@ struct ccp_private {
 	unsigned int max_nb_qpairs;	/**< Max number of queue pairs */
 	unsigned int max_nb_sessions;	/**< Max number of sessions */
 	uint8_t crypto_num_dev;		/**< Number of working crypto devices */
+	bool auth_opt;			/**< Authentication offload option */
 	struct ccp_device *last_dev;	/**< Last working crypto device */
 };
 
@@ -62,10 +63,8 @@ struct ccp_batch_info {
 	phys_addr_t lsb_buf_phys;
 	/**< LSB intermediate buf for passthru */
 	int lsb_buf_idx;
-#ifdef RTE_LIBRTE_PMD_CCP_CPU_AUTH
 	uint16_t auth_ctr;
-	/**< auth only ops batch */
-#endif
+	/**< auth only ops batch for CPU based auth */
 } __rte_cache_aligned;
 
 /**< CCP crypto queue pair */
diff --git a/drivers/crypto/ccp/rte_ccp_pmd.c b/drivers/crypto/ccp/rte_ccp_pmd.c
index d3553db..2061f46 100644
--- a/drivers/crypto/ccp/rte_ccp_pmd.c
+++ b/drivers/crypto/ccp/rte_ccp_pmd.c
@@ -22,6 +22,143 @@
 static unsigned int ccp_pmd_init_done;
 uint8_t ccp_cryptodev_driver_id;
 
+struct ccp_pmd_init_params {
+	struct rte_cryptodev_pmd_init_params def_p;
+	bool auth_opt;
+};
+
+#define CCP_CRYPTODEV_PARAM_NAME		("name")
+#define CCP_CRYPTODEV_PARAM_SOCKET_ID		("socket_id")
+#define CCP_CRYPTODEV_PARAM_MAX_NB_QP		("max_nb_queue_pairs")
+#define CCP_CRYPTODEV_PARAM_MAX_NB_SESS		("max_nb_sessions")
+#define CCP_CRYPTODEV_PARAM_AUTH_OPT		("ccp_auth_opt")
+
+const char *ccp_pmd_valid_params[] = {
+	CCP_CRYPTODEV_PARAM_NAME,
+	CCP_CRYPTODEV_PARAM_SOCKET_ID,
+	CCP_CRYPTODEV_PARAM_MAX_NB_QP,
+	CCP_CRYPTODEV_PARAM_MAX_NB_SESS,
+	CCP_CRYPTODEV_PARAM_AUTH_OPT,
+};
+
+/** ccp pmd auth option */
+enum ccp_pmd_auth_opt {
+	CCP_PMD_AUTH_OPT_CCP = 0,
+	CCP_PMD_AUTH_OPT_CPU,
+};
+
+/** parse integer from integer argument */
+static int
+parse_integer_arg(const char *key __rte_unused,
+		  const char *value, void *extra_args)
+{
+	int *i = (int *) extra_args;
+
+	*i = atoi(value);
+	if (*i < 0) {
+		CCP_LOG_ERR("Argument has to be positive.\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/** parse name argument */
+static int
+parse_name_arg(const char *key __rte_unused,
+	       const char *value, void *extra_args)
+{
+	struct rte_cryptodev_pmd_init_params *params = extra_args;
+
+	if (strlen(value) >= RTE_CRYPTODEV_NAME_MAX_LEN - 1) {
+		CCP_LOG_ERR("Invalid name %s, should be less than "
+			    "%u bytes.\n", value,
+			    RTE_CRYPTODEV_NAME_MAX_LEN - 1);
+		return -EINVAL;
+	}
+
+	strncpy(params->name, value, RTE_CRYPTODEV_NAME_MAX_LEN);
+
+	return 0;
+}
+
+/** parse authentication operation option */
+static int
+parse_auth_opt_arg(const char *key __rte_unused,
+		   const char *value, void *extra_args)
+{
+	struct ccp_pmd_init_params *params = extra_args;
+	int i;
+
+	i = atoi(value);
+	if (i < CCP_PMD_AUTH_OPT_CCP || i > CCP_PMD_AUTH_OPT_CPU) {
+		CCP_LOG_ERR("Invalid ccp pmd auth option. "
+			    "0->auth on CCP(default), "
+			    "1->auth on CPU\n");
+		return -EINVAL;
+	}
+	params->auth_opt = i;
+	return 0;
+}
+
+static int
+ccp_pmd_parse_input_args(struct ccp_pmd_init_params *params,
+			 const char *input_args)
+{
+	struct rte_kvargs *kvlist = NULL;
+	int ret = 0;
+
+	if (params == NULL)
+		return -EINVAL;
+
+	if (input_args) {
+		kvlist = rte_kvargs_parse(input_args,
+					  ccp_pmd_valid_params);
+		if (kvlist == NULL)
+			return -1;
+
+		ret = rte_kvargs_process(kvlist,
+					 CCP_CRYPTODEV_PARAM_MAX_NB_QP,
+					 &parse_integer_arg,
+					 &params->def_p.max_nb_queue_pairs);
+		if (ret < 0)
+			goto free_kvlist;
+
+		ret = rte_kvargs_process(kvlist,
+					 CCP_CRYPTODEV_PARAM_MAX_NB_SESS,
+					 &parse_integer_arg,
+					 &params->def_p.max_nb_sessions);
+		if (ret < 0)
+			goto free_kvlist;
+
+		ret = rte_kvargs_process(kvlist,
+					 CCP_CRYPTODEV_PARAM_SOCKET_ID,
+					 &parse_integer_arg,
+					 &params->def_p.socket_id);
+		if (ret < 0)
+			goto free_kvlist;
+
+		ret = rte_kvargs_process(kvlist,
+					 CCP_CRYPTODEV_PARAM_NAME,
+					 &parse_name_arg,
+					 &params->def_p);
+		if (ret < 0)
+			goto free_kvlist;
+
+		ret = rte_kvargs_process(kvlist,
+					 CCP_CRYPTODEV_PARAM_AUTH_OPT,
+					 &parse_auth_opt_arg,
+					 params);
+		if (ret < 0)
+			goto free_kvlist;
+
+	}
+
+free_kvlist:
+	rte_kvargs_free(kvlist);
+	return ret;
+}
+
 static struct ccp_session *
 get_ccp_session(struct ccp_qp *qp, struct rte_crypto_op *op)
 {
@@ -38,6 +175,7 @@ get_ccp_session(struct ccp_qp *qp, struct rte_crypto_op *op)
 	} else if (op->sess_type == RTE_CRYPTO_OP_SESSIONLESS) {
 		void *_sess;
 		void *_sess_private_data = NULL;
+		struct ccp_private *internals;
 
 		if (rte_mempool_get(qp->sess_mp, &_sess))
 			return NULL;
@@ -46,8 +184,9 @@ get_ccp_session(struct ccp_qp *qp, struct rte_crypto_op *op)
 
 		sess = (struct ccp_session *)_sess_private_data;
 
-		if (unlikely(ccp_set_session_parameters(sess,
-							op->sym->xform) != 0)) {
+		internals = (struct ccp_private *)qp->dev->data->dev_private;
+		if (unlikely(ccp_set_session_parameters(sess, op->sym->xform,
+							internals) != 0)) {
 			rte_mempool_put(qp->sess_mp, _sess);
 			rte_mempool_put(qp->sess_mp, _sess_private_data);
 			sess = NULL;
@@ -154,19 +293,20 @@ cryptodev_ccp_remove(struct rte_vdev_device *dev)
 static int
 cryptodev_ccp_create(const char *name,
 		     struct rte_vdev_device *vdev,
-		     struct rte_cryptodev_pmd_init_params *init_params)
+		     struct ccp_pmd_init_params *init_params)
 {
 	struct rte_cryptodev *dev;
 	struct ccp_private *internals;
 	uint8_t cryptodev_cnt = 0;
 
-	if (init_params->name[0] == '\0')
-		snprintf(init_params->name, sizeof(init_params->name),
-				"%s", name);
+	if (init_params->def_p.name[0] == '\0')
+		snprintf(init_params->def_p.name,
+			 sizeof(init_params->def_p.name),
+			 "%s", name);
 
-	dev = rte_cryptodev_pmd_create(init_params->name,
+	dev = rte_cryptodev_pmd_create(init_params->def_p.name,
 				       &vdev->device,
-				       init_params);
+				       &init_params->def_p);
 	if (dev == NULL) {
 		CCP_LOG_ERR("failed to create cryptodev vdev");
 		goto init_error;
@@ -193,15 +333,16 @@ cryptodev_ccp_create(const char *name,
 
 	internals = dev->data->dev_private;
 
-	internals->max_nb_qpairs = init_params->max_nb_queue_pairs;
-	internals->max_nb_sessions = init_params->max_nb_sessions;
+	internals->max_nb_qpairs = init_params->def_p.max_nb_queue_pairs;
+	internals->max_nb_sessions = init_params->def_p.max_nb_sessions;
+	internals->auth_opt = init_params->auth_opt;
 	internals->crypto_num_dev = cryptodev_cnt;
 
 	return 0;
 
 init_error:
 	CCP_LOG_ERR("driver %s: %s() failed",
-		    init_params->name, __func__);
+		    init_params->def_p.name, __func__);
 	cryptodev_ccp_remove(vdev);
 
 	return -EFAULT;
@@ -213,12 +354,15 @@ cryptodev_ccp_probe(struct rte_vdev_device *vdev)
 {
 	int rc = 0;
 	const char *name;
-	struct rte_cryptodev_pmd_init_params init_params = {
-		"",
-		sizeof(struct ccp_private),
-		rte_socket_id(),
-		CCP_PMD_MAX_QUEUE_PAIRS,
-		RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_SESSIONS
+	struct ccp_pmd_init_params init_params = {
+		.def_p = {
+			"",
+			sizeof(struct ccp_private),
+			rte_socket_id(),
+			CCP_PMD_MAX_QUEUE_PAIRS,
+			RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_SESSIONS
+		},
+		.auth_opt = CCP_PMD_AUTH_OPT_CCP,
 	};
 	const char *input_args;
 
@@ -231,15 +375,17 @@ cryptodev_ccp_probe(struct rte_vdev_device *vdev)
 		return -EINVAL;
 
 	input_args = rte_vdev_device_args(vdev);
-	rte_cryptodev_pmd_parse_input_args(&init_params, input_args);
-	init_params.max_nb_queue_pairs = CCP_PMD_MAX_QUEUE_PAIRS;
+	ccp_pmd_parse_input_args(&init_params, input_args);
+	init_params.def_p.max_nb_queue_pairs = CCP_PMD_MAX_QUEUE_PAIRS;
 
 	RTE_LOG(INFO, PMD, "Initialising %s on NUMA node %d\n", name,
-			init_params.socket_id);
+		init_params.def_p.socket_id);
 	RTE_LOG(INFO, PMD, "Max number of queue pairs = %d\n",
-			init_params.max_nb_queue_pairs);
+		init_params.def_p.max_nb_queue_pairs);
 	RTE_LOG(INFO, PMD, "Max number of sessions = %d\n",
-			init_params.max_nb_sessions);
+		init_params.def_p.max_nb_sessions);
+	RTE_LOG(INFO, PMD, "Authentication offload to %s\n",
+		((init_params.auth_opt == 0) ? "CCP" : "CPU"));
 
 	rc = cryptodev_ccp_create(name, vdev, &init_params);
 	if (rc)
@@ -257,6 +403,9 @@ static struct cryptodev_driver ccp_crypto_drv;
 
 RTE_PMD_REGISTER_VDEV(CRYPTODEV_NAME_CCP_PMD, cryptodev_ccp_pmd_drv);
 RTE_PMD_REGISTER_PARAM_STRING(CRYPTODEV_NAME_CCP_PMD,
-	"max_nb_queue_pairs=<int> max_nb_sessions=<int> socket_id=<int>");
+	"max_nb_queue_pairs=<int> "
+	"max_nb_sessions=<int> "
+	"socket_id=<int> "
+	"ccp_auth_opt=<int>");
 RTE_PMD_REGISTER_CRYPTO_DRIVER(ccp_crypto_drv, cryptodev_ccp_pmd_drv.driver,
 			       ccp_cryptodev_driver_id);
-- 
2.7.4

Re: [dpdk-dev] [PATCH v3] crypto/ccp: support command line option to enable CPU based auth

[De Lara Guarch, Pablo]

> -----Original Message-----
> From: Ravi Kumar [mailto:Ravi1.kumar@amd.com]
> Sent: Thursday, May 10, 2018 10:20 AM
> To: dev@dpdk.org
> Cc: De Lara Guarch, Pablo <pablo.de.lara.guarch@intel.com>;
> thomas@monjalon.net; hemant.agrawal@nxp.com
> Subject: [PATCH v3] crypto/ccp: support command line option to enable CPU
> based auth
> 
> CCP PMD supports authentication offload to either of CCP or CPU.
> The earlier version of patch provides this option as compile time.
> This patch changes this option from compile time to run time.
> User can pass "ccp_auth_opt=1" as an additional arguments to vdev
> parameter to enable authentication operations on CPU.
> 
> Signed-off-by: Ravi Kumar <Ravi1.kumar@amd.com>

Applied to dpdk-next-crypto.
Thanks,

Pablo

Re: [dpdk-dev] [PATCH v3] crypto/ccp: support command line option to enable CPU based auth

[Kumar, Ravi1]

>
>> -----Original Message-----
>> From: Ravi Kumar [mailto:Ravi1.kumar@amd.com]
>> Sent: Thursday, May 10, 2018 10:20 AM
>> To: dev@dpdk.org
>> Cc: De Lara Guarch, Pablo <pablo.de.lara.guarch@intel.com>; 
>> thomas@monjalon.net; hemant.agrawal@nxp.com
>> Subject: [PATCH v3] crypto/ccp: support command line option to enable 
>> CPU based auth
>> 
>> CCP PMD supports authentication offload to either of CCP or CPU.
>> The earlier version of patch provides this option as compile time.
>> This patch changes this option from compile time to run time.
>> User can pass "ccp_auth_opt=1" as an additional arguments to vdev 
>> parameter to enable authentication operations on CPU.
>> 
>> Signed-off-by: Ravi Kumar <Ravi1.kumar@amd.com>
>
>Applied to dpdk-next-crypto.
>Thanks,
>
>Pablo
>
Thanks a lot Pablo.

Regards,
Ravi