From: "Somalapuram, Amaranath" <Amaranath.Somalapuram@amd.com>
To: "Nandibasappa, Girish" <Girish.Nandibasappa@amd.com>,
"dev@dpdk.org" <dev@dpdk.org>
Cc: Ferruh Yigit <ferruh.yigit@intel.com>
Subject: Re: [dpdk-dev] [PATCH v1] net/axgbe: add support for set MTU API
Date: Thu, 4 Jun 2020 05:22:38 +0000 [thread overview]
Message-ID: <CY4PR12MB1574CDDC2C494FC5D58E5F12F8890@CY4PR12MB1574.namprd12.prod.outlook.com> (raw)
In-Reply-To: <20200601144841.7814-1-gnandiba@amd.com>
[AMD Public Use]
Acked-by: Somalapuram Amaranath <asomalap@amd.com>
-----Original Message-----
From: Nandibasappa, Girish <Girish.Nandibasappa@amd.com>
Sent: Monday, June 1, 2020 8:19 PM
To: dev@dpdk.org
Cc: Somalapuram, Amaranath <Amaranath.Somalapuram@amd.com>
Subject: [PATCH v1] net/axgbe: add support for set MTU API
From: gnandiba <gnandiba@amd.com>
This patch adds support for set_mtu API which can be used to change the Maximum Transmission unit (MTU) from application.
Signed-off-by: gnandiba <gnandiba@amd.com>
---
drivers/net/axgbe/axgbe_ethdev.c | 32 +++++++++++++++++++++++++++++++-
1 file changed, 31 insertions(+), 1 deletion(-)
diff --git a/drivers/net/axgbe/axgbe_ethdev.c b/drivers/net/axgbe/axgbe_ethdev.c
index 867058845..cdb1297f5 100644
--- a/drivers/net/axgbe/axgbe_ethdev.c
+++ b/drivers/net/axgbe/axgbe_ethdev.c
@@ -73,6 +73,7 @@ static void axgbe_rxq_info_get(struct rte_eth_dev *dev, uint16_t queue_id, static void axgbe_txq_info_get(struct rte_eth_dev *dev, uint16_t queue_id,
struct rte_eth_txq_info *qinfo);
const uint32_t *axgbe_dev_supported_ptypes_get(struct rte_eth_dev *dev);
+static int axgb_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
struct axgbe_xstats {
char name[RTE_ETH_XSTATS_NAME_SIZE];
@@ -214,6 +215,7 @@ static const struct eth_dev_ops axgbe_eth_dev_ops = {
.dev_supported_ptypes_get = axgbe_dev_supported_ptypes_get,
.rx_descriptor_status = axgbe_dev_rx_descriptor_status,
.tx_descriptor_status = axgbe_dev_tx_descriptor_status,
+.mtu_set= axgb_mtu_set,
};
static int axgbe_phy_reset(struct axgbe_port *pdata) @@ -1254,7 +1256,35 @@ axgbe_dev_supported_ptypes_get(struct rte_eth_dev *dev)
return ptypes;
return NULL;
}
-
+static int axgb_mtu_set(struct rte_eth_dev *dev, uint16_t mtu) {
+struct rte_eth_dev_info dev_info;
+struct axgbe_port *pdata = dev->data->dev_private;
+uint32_t frame_size = mtu + RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN;
+unsigned int val = 0;
+axgbe_dev_info_get(dev, &dev_info);
+/* check that mtu is within the allowed range */
+if ((mtu < RTE_ETHER_MIN_MTU) || (frame_size > dev_info.max_rx_pktlen))
+return -EINVAL;
+/* mtu setting is forbidden if port is start */
+if (dev->data->dev_started) {
+PMD_DRV_LOG(ERR, "port %d must be stopped before configuration",
+dev->data->port_id);
+return -EBUSY;
+}
+if (frame_size > RTE_ETHER_MAX_LEN) {
+dev->data->dev_conf.rxmode.offloads |=
+DEV_RX_OFFLOAD_JUMBO_FRAME;
+val = 1;
+} else {
+dev->data->dev_conf.rxmode.offloads &=
+~DEV_RX_OFFLOAD_JUMBO_FRAME;
+val = 0;
+}
+AXGMAC_IOWRITE_BITS(pdata, MAC_RCR, JE, val);
+dev->data->dev_conf.rxmode.max_rx_pkt_len = frame_size;
+return 0;
+}
static void axgbe_get_all_hw_features(struct axgbe_port *pdata) {
unsigned int mac_hfr0, mac_hfr1, mac_hfr2;
--
2.17.1
next prev parent reply other threads:[~2020-06-04 5:22 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-01 14:48 gnandiba
2020-06-04 5:22 ` Somalapuram, Amaranath [this message]
2020-06-08 9:08 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CY4PR12MB1574CDDC2C494FC5D58E5F12F8890@CY4PR12MB1574.namprd12.prod.outlook.com \
--to=amaranath.somalapuram@amd.com \
--cc=Girish.Nandibasappa@amd.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).